imat-uve

服务目录

这里你能找到所有的测试方法、标准和测试规格,我们将按这些维度处理您的个性化订单。如您缺失任何必要信息,请邮件询问我们。

搜索

测试方法 简介
Jaguar Cars & Land Rover STJLR.50.5151 - Performance Requirements of Chrome Plated Polymers e.g. Substrates - Rigid and flexible polymer blends, ABS, ABS/PC, nylon Plastic parts intended for plating
Jaguar Cars & Land Rover STJLR.51.5021: Performance Requirements of Acoustical and Thermal Assemblies materials used as thermal and acoustical insulators in vehicl inetrior, luggage compartment, engine compartment and underbody applications
Jaguar Cars & Land Rover STJLR.51.5182: Performance Requirements of Labels All labels used for JLR vehicels
Jaguar Cars & Land Rover STJLR.51.5223: Temporary protection systems for trim components Temporary protection systems that are used to prevent handling damage during vehicle assembly, transit and transportation
Jaguar Cars & Land Rover STJLR.51.5229: Environmental Quality Requirements for interior materials and components For all surface materials on the interior of the vehicle with a surface area exceeding 100 cm_ (all colours).
Jaguar Cars & Land Rover STJLR.51.5229: Environmental Quality Requirements for interior materials and components For all surface materials on the interior of the vehicle with a surface area exceeding 100 cm_ (all colours).
Jaguar Cars & Land Rover STJLR.51.5241:Performance Requirements of Exterior Painted Parts for all exterior painted body and trim components
Jaguar Cars & Land Rover STJLR.51.5242 - Paint and Lacquer Performance - Interior For painted/lacquered interior trim materials (polymeric and metallic substrates). For painted (including soft painted, powder coated and lacquered) components used for automotive interior assemblies.
Jaguar Cars & Land Rover STJLR.51.5242: Paint and Lacquer Performance - Interior For painted/lacquered interior trim materials (polymeric and metallic substrates). For painted (including soft painted, powder coated and lacquered) components used for automotive interior assemblies.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262: Performance Requirements of Non-Decorated Plastics
Jaguar Cars & Land Rover STJLR.51.5281 - Material Performance - Polymeric Foils e.g. Seat facings, Seat backs,Door casings
Jaguar Cars & Land Rover STJLR.51.5281: Material Performance - Polymeric Foils e.g. seat facings, seat backs, door casings
Jaguar Cars & Land Rover STJLR.51.5361: Material Performance - Light Duty Fabrics Light duty trim fabrics for use on headlinings, pillar trims, sun visors
Jaguar Cars & Land Rover STJLR.51.5362: Material Performance - Heavy Duty Fabrics Heavy duty trim fabrics
Jaguar Cars & Land Rover STJLR.51.5381 - Lacquered Decorative Finished Interior Trim Components For decorative lacquered finishers and inmould foil decorated parts for interior trim applications.
Jaguar Cars & Land Rover STJLR.51.5381 - Lacquered Decorative Finished Interior Trim Components For decorative lacquered finishers and inmould foil decorated parts for interior trim applications.
Jaguar Cars & Land Rover STJLR.51.5381: Lacquered Decorative Finished Interior Trim Components (Veneers) For decorative lacquered finishers and in-mould foil decorated parts for interior trim applications
Jaguar Cars & Landrover STJLR 51.5225: Performance specification: interior trim assemblies For interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays.
Jaguar Cars & Landrover STJLR.51.5224:Instrument Panel Assembly Performance: Incorporating Flexible Cover Skin Material
Jaguar Cars & Landrover STJLR.51.5225 - Performance specification, interior trim assemblies for interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays
Jaguar Cars & Landrover STJLR.51.5225 - Performance specification, interior trim assemblies For interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays
Jaguar Cars & Landrover STJLR.51.5301 - Performance Requirements of Rubber Parts Rubber components and assemblies for use on the interior, exterior, and certain under-bonnet areas, e.g. weatherstrips, door seals, floor mats, grommets
Jaguar Cars & Landrover STJLR.51.5301 - Performance Requirements of Rubber Parts Rubber components and assemblies for use on the interior, exterior, and certain under-bonnet areas, e.g. weatherstrips, door seals, floor mats, grommets.
Jaguar Cars & Landrover STJLR.51.5301: Performance Requirements of Exterior & Interior Rubber Parts for components of certain engine bay components
Jaguar JNS 30.03.05 - Peel Strength Materials Tests - Peel Strength
Jaguar JNS 30.32.04 - Resistance to heat ageing Resistance to heat ageing - General
Jaguar JNS 30.60.08-A - Susceptibility to amine staining (Method A) Determination of susceptibility to Amine Staining, Method A (imitation leather )
Jaguar JNS 30.60.08-B - Susceptibility to amine staining (Method B) Determination of susceptibility to Amine Staining, Method B (foam)
Jaguar JNS 30.60.08-C - Susceptibility to amine staining (Method C) Determination of susceptibility to Amine Staining, Method C (foam and imitation leather combination )
Jaguar STJLR.51.5142: Material Performance - Seating Foams Seating foams (typically polyurethanes), including head restraints, cushions, bolsters, armrests
Jaguar STJLR.51.5181 - Self adhesive tape System Self Adhesive Tape Systems
Jaguar TPJLR 52.008 - Scratch Resistance Assessment of Scratch Performance - Crosshatch Method
Jaguar TPJLR 52.095 - Determination of VOC Emissions Determination of VOC Emissions - Small Bag Method
Jaguar TPJLR 52.457 - Resistance to fibre show through of perforated leather Resistance to fibre show through of perforated leather
Jaguar TPJLR 52.458 (VDA 270 Variant 2) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.458 (VDA 270 Variant 3) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.459 - Electrical Resistance Determination of the electrical resistance of Textile Fabrics
Jaguar TPJLR.52.010 - Mar resistance (Erichsen 430-PI Assessment of mar performance - gloss assessment method
Jaguar TPJLR.52.254 - Corrosion test Calcium Chloride Accelerated Corrosion Test (Russian Mud Test)
Jaguar TPJLR.52.422 - Deformation behavior (indentation and recovery) Determination of the Indentation and Recovery of Foam Parts
Jaguar TPJLR.52.425 - Trapezoid Tear Strength Trapezoid Tear Strength
Jaguar TPJLR.52.451 - Transparancy, translucence Fabric Transparency
JAMA measurement method - Determination of organic emissions organic emissions from vehicle interior measurements
JASO M 403 § 6.11.2.1 method A - Abrasion test (Taber) Test method for automotive seat trim fabrics; § 6.11.2: Frictional resistance (method A, taber abrasion)
JASO M 403 § 6.1 - Determination of mass per unit Test method for automotive seat trim fabrics; § 6.1: Mass per unit area
JASO M 403 § 6.10 - Resistance to rubbing Test method for automotive seat trim fabrics; § 6.10: Resistance to rubbing
JASO M 403 § 6.12.2.1 method A - Pilling (ICI-type tester) Test method for automotive seat trim fabrics; § 6.12: Pilling (method A, ICI-type tester)
JASO M 403 § 6.20 - Burning behaviour Test method for automotive seat trim fabrics; § 6.20: Inflammability
JASO M 403 § 6.3.2 - Tensile properties Test method for automotive seat trim fabrics; § 6.3.2: Tensile strength and elongation percentage
JASO M 403 § 6.4.2.2 method B - Tearing strength (trapezoid method) Test method for automotive seat trim fabrics; § 6.4.2: Tearing strength (Method B, trapezoid)
JASO M 403 § 6.5 - Static and permanent elongation Test method for automotive seat trim fabrics; § 6.5: static and permanent elongation
JASO M 403 § 6.6 - Determination of seaming strength Test method for automotive seat trim fabrics; § 6.6: seaming strength
JASO M 403 § 6.7 - Seam weariness Test method for automotive seat trim fabrics; § 6.7: seam weariness
JASO M902 - Determination of VOC emission Road vehicles - Interior parts and materials - Measurement methods of diffused volatile organic compounds (VOC)
JIS K 5600-4-3 - Visual comparison of colour Testing methods for paints - Part 4: Visual characteristics of film - Section 3: Visual comparison of the colour of paints
JIS K 5600-5-6 - Cross-cut test Testing methods for paints - Part 5: Mechanical property of film - Section 6: Adhesion test (Cross-cut test)
JIS K6251 - Tensile stress-strain properties Rubber, vulcanized or thermoplastic- Determination of tensile stress-strain properties
JIS L 0842 - Colour fastness to carbon arc lamp light Test methods for colour fastness to enclosed carbon arc lamp light
JIS L 0849 (Crockmeter) / DIN EN ISO 105-X12 - Colour fastness to rubbing Test methods for colour fastness to rubbing - Type I rubbing tester (crockmeter)