Service specifications
Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.
Search
Title | Description |
---|---|
B 80.30 commodities - BgLM aus Kunststofffen | Investigation of commodities made ÀÀof plastic, which are intended to come into contact with food |
B 82.02-2 (textiles) objects of commodities / DIN EN 14362-1 - Determination of certain aromatic amines from azo colorants in textiles | Investigation of commodities - Methods for determination of certain aromatic amines from azo colorants in textiles - Part 1: Cross-reference certain azo colourants without prior extraction GC-MSD Measurements |
B 82.02-3 (leather) objects of commodities/ DIN ISO/TS 17234 - Determination of certain azo colorants in coloured leather | Investigation of commodities - Determination of certain azo colorants in coloured leather (DIN ISO / TS 17234) HPLC Measurements (UV-detection) |
B 82.02-4(Polyestermethod)objects of commodities/ DIN14362-1 - Determination of certain aromatic amines from azo dyes | Investigation of commodities - Methods for determination of certain aromatic amines from azo colorants in textiles - Part 2: Cross-reference certain azo colourants by extracting the fibers GC-MSD Measurements |
B 82.02-8 objects of commodities - Determination of Pentachlorphenol | Investigation of commodities - Identification and determination of pentachlorophenol (PCP) in commodities, especially leather and textiles (Reference method) GC-ECD Measurements |
B 82.02-9 objects of commodities - Determination of aminoazobenzene | Investigation of commodities - Verification of the use of azo colourants which can release 4-Aminoazobenzene HPLC Measurements (UV-detection) |
B 82.02. objects of commodities - Determination of formaldehyd emission | Investigation of commodities - Determination of formaldehyde emission from textile materials and articles Photometry using UV/VIS-spectrophotometer |
B 82.10.1 objects of commodities - Saliva and persperation resistance | Investigation of commodities - Testing of coloured children's toys to saliva and perspiration (DIN 53 160) |
Ball drop test | Ball drop test Drop tests (eg. ball drop test) |
Ball roll test | Ball roll test Drop tests (eg. ball drop test) |
based on RAL-GZ 430-Anex 18 & VDA 270 - Odour | Odour test for furniture leather - rapid method based on VDA 270 and RAL-GZ 430 Odor tests (olfactometry) |
Benecke-Kaliko Test Method TM-LAB-00123 - Suntest | Resistance to water, light and oil of foils laminated with barite plates Exposure / weathering with major equipment (Xenon) |
BGI 505-23 - Determination of N-nitrosamines | Procedure for Determining of N-Nitrosamines GC-TEA measurements (GC-chemiluminescence detection) |
BGI 505.23 (Analysis of delivered cartridges) - Determination of N-Nitrosamines | Procedure for Determining of N-Nitrosamines (Analysis of delivered cartridges) GC-TEA measurements (GC-chemiluminescence detection) |
Blocking | General test method - Blocking tendency Media resistance, manually |
BMW 8 121 649.6 - Specs Safety Net | partition net |
BMW 8 121 649.6 - Specs Safety Net | partition net |
BMW 9 170 596.6 Index B / PR 080.3 § 4.3.2 - Overvoltage test (only seat heater) | PR components in the seat cover system - Compatibility- and continuous loading method; § 4.3.2: Overvoltage test (only seat heater) Current, voltage, resistance measurements |
BMW AA 0081 - single impact testing | Determination of the separation layer of multilayer paint systems by means of single impact testing Road stone tests |
BMW AA 014 - Colour measurement (CIELAB) | Colour measurements with the Datacolor 600 Color measurements |
BMW AA 0264 - Multi-stone chip test with salt water exposure | Multi-stone chip test with salt water exposure Road stone tests |
BMW AA 0616 - weight change with contact storing | Determination of weight change with contact storing Media resistance, manually |
BMW AA-0026 / Exterior - Ageing resistance test | Ageing resistance test - Scope Exterior Heat storage (constant temperature) |
BMW AA-0026 / Exterior - Aging resistance test | Aging resistance test - Scope Exterior Heat storage (constant temperature) |
BMW AA-0026 / Exterior - Aging resistance test | Aging resistance test - Scope exterior Heat storage (constant temperature) |
BMW AA-0026 / Interior - Aging resistance test | Ageing resistance test - Scope Interior Heat storage (constant temperature) |
BMW AA-0053 - Sun cream resistance | Sun cream resistance of painted parts in the interior Media resistance, manually |
BMW AA-0054 - Resistance to car-wash machines | Resistance of coatings to car-wash machines Abrasion / wear test (equipment not available at imat) |
BMW AA-0055, Test method 1 - Chemical resistance, fuel resistance | Chemical resistance test of surfaces - Test method 1: Fuel resistance Media resistance, manually |
BMW AA-0055, Test method 2 - Chemical resistance | Chemical resistance test of surfaces - Test method 2 Media resistance, manually |
BMW AA-0055, Test method 3 - Chemical resistance | Chemical resistance test of surfaces - Test method 3 Media resistance, manually |
BMW AA-0055, Test method 4 - Chemical resistance | Chemical resistance test of surfaces - Test method 4 Media resistance, manually |
BMW AA-0055, Test method 5 - Chemical resistance | Chemical resistance test of surfaces - Test method 5 Media resistance, manually |
BMW AA-0055, Test method 7 - chemical resistance | Resistance testing of surfaces against chemicals - Test method 7, Resistance of anodized surfaces Media resistance, manually |
BMW AA-0055, Test method 7 - chemical resistance | Resistance testing of surfaces against chemicals - Test method 7, Resistance of anodized surfaces Media resistance, manually |
BMW AA-0055, Test method 8 - Acid-Heat-Alkali resistance test (SWA-test) | Resistance testing of surfaces against chemicals - Test method 8, Resistance of anodized surfaces by Acid-Heat-Alkali resistance test (SWA-test) Media resistance, manually |
BMW AA-0055: Chemical resistance test of surfaces | This work instruction describes the test media and methods used in the chemical resistance test of surfaces. |
BMW AA-0061 - Determination of formaldehyd emission | Formaldehyd emission from non-metallic materials and components, determined by HPLC HPLC Measurements (UV-detection) |
BMW AA-0079 - Determination of multi impact stone chip resistance | Determination of multi impact stone chip resistance Road stone tests |
BMW AA-0101 - Gloss measurement | Reflectometer Value (Gloss) Gloss measurements |
BMW AA-0129 - Cass testing (copper chloride-acetic acid salt spray testing) | Corrosion tests in artificial atmospheres - Salt spray tests (Copper chloride-acetic acid salt spray testing, CASS testing ) Corrosion test (e.g. salt spray test) |
BMW AA-0134 - Dry scratch resistance test | Dry scratch resistance test using Crockmeter Abrasion tester APG |
BMW AA-0136 - Resistance to pressure water jet | Testing of Resistance to Pressure Water Jet (Steam Jet Test) Steam jet test |
BMW AA-0136 - Resistance to pressure water jetting | Testing of resistance to pressure water jetting Steam jet test |
BMW AA-0136 - Resistance to pressure water jetting | Testing of resistance to pressure water jetting Steam jet test |
BMW AA-0136 - Steam jet test | Testing of resistance to pressure water jetting Steam jet test |
BMW AA-0180 - Cross hatch testing | Cross hatch testing Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW AA-0203 - Hydrolysis Test | Hydrolysis Test Climate chamber test (constant climate / alternating climate / temperature change) |
BMW AA-0213 - Condensation water constant atmosphere test | Condensation water constant atmosphere test Condensation water atmosphere climatic tests |
BMW AA-0224 - Corrosion Test | Cyclic Corrosion Test Corrosion test (e.g. salt spray test) |
BMW AA-0224 - Cyclic corrosion test | Cyclic corrosion test Corrosion test (e.g. salt spray test) |
BMW AA-0224: Cyclic Corrosion Test | |
BMW AA-0235 / DIN EN ISO 16474-2 - Accelerated weathering | Accelerated weathering crack stability Exposure / weathering with major equipment (Xenon) |
BMW AA-0235 / SAE J2527 - Accelerated weathering | Accelerated weathering crack stability Exposure / weathering with major equipment (Xenon) |
BMW AA-0236 / DIN EN ISO 4892-2 (Procedure A - BST 65 °C) - Weathering colour stability | Accelerated weathering colour stability Exposure / weathering with major equipment (Xenon) |
BMW AA-0236 DIN EN ISO 4892-2 (Procedure A - BST 65 °C) - Weathering colour stability | Accelerated weathering colour stability Exposure / weathering with major equipment (Xenon) |
BMW AA-0256 - Measurement of Thickness and Grammage | Measurement of Thickness and Grammage of Damping Pads Thickness measurement |
BMW AA-0256 - Measurement of Thickness and Grammage | Measurement of Thickness and Grammage of Damping Materials Thickness measurement |
BMW AA-0257 - Measurement of structure and gloss | Measurement of structure and gloss on painted surfaces Gloss measurements |
BMW AA-0324 - Salt spray test | Salt spray test Corrosion test (e.g. salt spray test) |
BMW AA-0324 - Saltspray-test | Saltspray-test Corrosion test (e.g. salt spray test) |
BMW AA-0340 - Scalpel cut | Scalpel cut on CFK-parts with clear coating Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW AA-0349 - Stapelfähigkeit | Stack Ability of Damping Pads Heat storage (constant temperature) |
BMW AA-0354 - Color Measurement | Technical Understanding of color measurement of test panels for Initial and Batch release Color measurements |
BMW AA-0403 - Visual Color Comparison and Metamerism Test | Visual color Comparison and Metamerism Test Reviews / assessments with standards, visual assessment of samples |
BMW AA-0412 - Resistance to abrasion | Abrasion Test of Leather by Means of Ball Plate Martindale |
BMW AA-0412 - Resistance to abrasion | Abrasion Test of Leather by Means of Ball Plate Martindale |
BMW AA-0419 - Staining Behavior and Cleaning Ability | Staining Behavior and Cleaning Ability of Leather Martindale |
BMW AA-0419 - Staining Behavior and Cleaning Ability | Staining Behavior and Cleaning Ability of Leather Martindale |
BMW AA-0420 - Hydrolysis at Leather | Hydrolysis at Leather Heat storage (constant temperature) |
BMW AA-0471 - Abrasion Resistance using the ABREX Test Equipment | Abrasion Resistance using the ABREX Test Equipment Surface test-Abrex |
BMW AA-0547 - Determination of mass per unit area and thickness of effective pile and stitch rate | Determination of mass of effective pile per unit area above backing, of effective pile thickness and stitch rate for carpets and floor mats, band knife shearing machine method Thickness measurement |
BMW AA-0551, based on DIN 53121 - Bending stiffness | Bending stiffness - 2-point procedure based on DIN 53 121 Universal testing machine, tensile, bending, tear tests .. |
BMW AA-0563 - Repeated flexing (Flexometer method) | Flex resistance at low temperature Dauerfaltverhalten |
BMW AA-0565 - Shrinkage Test | Shrinkage Test Instrumten Panel Storage under changing climatic/ temperature conditions |
BMW AA-0566 - Penetration Behaviour Leather | Penetration Behaviour Leather Media resistance, manually |
BMW AA-0567, acidic - Colour fastness to perspiration | Perspiration Resistance Media resistance, manually |
BMW AA-0567, alkaline - Colour fastness to perspiration | Perspiration Resistance Media resistance, manually |
BMW AA-0568 - Dimensional stability | Dimensional Stability Leather Length measurement / Curling (test equipment from 0 to 0.5 m) |
BMW AA-0570 - Abrasion resistance of flocked plastic parts | Test of abrasion resistance of flocked plastic parts Abrasion tester APG |
BMW AA-0602 Compression set - Compression set at upholstery wadding | Compression set at upholstery Watten Deformation, elasticity measurements |
BMW AA-0602 Pressure sensitivity - Pressure sensitivity at upholstery wadding | Pressure sensitivity at upholstery wadding Deformation, elasticity measurements |
BMW AA-C 166 / TD_G_CB_SOP_5.4_113_G_0 - Determination of amines | Determination of organic substances by HPLC (amines) HPLC Measurements (UV-detection/pre-column derivatization) |
BMW AA-N 040 - Determination of mass per unit area and thickness of effective pile and stitch rate | Determination of mass of effective pile per unit area above backing, of effective pile thickness and stitch rate for carpets and floor mats, band knife shearing machine method Thickness measurement |
BMW AA-N 043 - Abrasion resistance of flocked plastic parts | Test of abrasion resistance of flocked plastic parts Abrasion tester APG |
BMW AA-N 067, based on DIN 53121 - Flexural rigidity | Determination of stiffness in bending - based on DIN 53 121 Universal testing machine, tensile, bending, tear tests .. |
BMW AA-N 071 / condition as delivered - Staining behaving and cleaning ability of Leather | Staining behaving and cleaning ability of leather, delivered condition Martindale |
BMW AA-N 071 / Staining (condition as delivered) - Staining behaving of Leather | Staining behaving of Leather, delivered condition Martindale |
BMW AA-N 071 / with Hydrolysis weathering - Staining behaving and cleaning ability of Leather | Staining behaving and cleaning ability of leather, hydrolysis ageing after cleaning Martindale |
BMW AA-N 071 / with Light fastness - Staining behaving and cleaning ability of Leather | Staining behaving and cleaning ability of leather, light fastness test after cleaning Martindale |
BMW AA-N 071: Staining behaving and cleaning ability of Leather | Leather |
BMW AA-P 107 - Gloss measurement | Reflectometer value (gloss) Gloss measurements |
BMW AA-P 124 - Visual color comparison and metamerism test | Visual color Comparison and Metamerism Test Reviews / assessments with standards, visual assessment of samples |
BMW AA-P 177 - Cross hatch testing | Cross hatch testing Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW AA-P 192 - Multi impact stone chip resistance | Determination of multi impact stone chip resistance Road stone tests |
BMW AA-P 194, method 1 - Chemical resistance | Chemical resistance test of surfaces Media resistance, manually |
BMW AA-P 194, method 2 - Chemical resistance | Chemical resistance test of surfaces, method 2 Media resistance, manually |
BMW AA-P 224 - Condensation water constant atmosphere test | Condensation Water Constant Atmosphere Test Condensation water atmosphere climatic tests |
BMW AA-P 257 - Resistance of painted parts against sun lotion | Resistance of painted parts within the interioor against sun lotion Media resistance, manually |
BMW AA-P 259 - Mar resistance (Crockmeter) | Mar resistance testing using Crockmeter Abrasion tester APG |
BMW AA-P 260 - Accelerated weathering | Accelerated weathering - crack resistance Exposure / weathering with major equipment (Xenon) |
BMW AA-P 275 - Ageing resistance test | Ageing resistance test Heat storage (constant temperature) |
BMW AA-P 276 - Temperature cycle test | Temperature Cycle Test Storage under changing climatic/ temperature conditions |
BMW AA-P 290 - Steam jet test | Steam jet cleaner test of coatings Steam jet test |
BMW AA-P 296 - Abrasion resistance using the Abrex test equipment | Abrasion resistance using the ABREX Test Equipment (dry + test media acc. to GS 97045) Surface test-Abrex |
BMW AA-P 308 - Hydrolysis test | Hydrolysis test Climate chamber test (constant climate / alternating climate / temperature change) |
BMW AA-P 319 - Scalpel cut | Scalpel cut on CFK-parts with clear coating Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW Compressibility & recovery ability | Compressibility & recovery ability (see BMW GS 93026-1) Deformation, elasticity measurements |
BMW GS 90010-1: Oberflächenschutzarten für metallische Werkstoffe - Normteile, Zeichnungsteile | Inorganic coating systems on metallic materials |
BMW GS 90011 - Coating of parts made of metallic materials by means of organic materials, Requirements and tests | for varnished metal parts (incl. the overall body), for painted plastic parts in the interior and exterior applies GS 97045-1 and -2 |
BMW GS 93008-4: Substances of concern - Materials and components - Constituents and emissions | |
BMW GS 93010-2 § 7.6.1.1 - Flexural stress in low temperatures ("R" index) | Elastomers - Test procedures and tolerances for material characteristics; § 7.6.1.1: Flexural stress in low temperatures ("R" index) Knitterwinkelmessung/ Biegesteifigkeit (hochstehend, hängenden Winkel/ Cantilever) |
BMW GS 93010-2: Elastomers - Test procedure and tolerances of the material characteristics | materials and components made of non-foamed cross-linked elastomers |
BMW GS 93010-2: Elastomers - Test procedures | Materials and components made of non-foamed cross-linked elastomers |
BMW GS 93011-1 (950°C) - Determination of Incineration residue | Elastomers - Identification, Determination of Residue on Ignition of Halogen-free Elastormers (950°C) Weighing, determination of mass and mass change (residue on ignition, dry residue), density |
BMW GS 93011-2 (950°C) - Determination of Incineration residue | Elastomers - Identification, Determination of Residue on Ignition of Elastomers Containing Chlorine, Bromine or Iodine (950°C) Weighing, determination of mass and mass change (residue on ignition, dry residue), density |
BMW GS 93011-3 - Determination of extractables | Elastomers - Identification, Determination of Extractable Constituents by Means of Extraction using Cyclohexane/Acetone Aufschlüsse, Elutionen, Extraktionen, Destillationen (naßchemisch) |
BMW GS 93011-4 - Thermogravimetrical analysis (TGA) | Elastomers - Identification, Determination of thermal degradation behavior using thermogravimetry (TG) Thermogravimetrie (TGA) / DSC |
BMW GS 93011-5 - Low-temperature standard value | Elastomer - identification, Determination of low-temperatur standard value by differential scanning calorimetry (DSC) |
BMW GS 93011-6 - Pyrolysis IR | Elastomers - identification, Analysis by infrared spectroscopy (IR), Pyrolysis IR Chemical Analysis (equipment not available at imat) |
BMW GS 93011-7-A - Paint indifference; method A: contact discoloration and environment discoloration due to migration | Elastomers - Determination of properties, Methods of Test for Determination Discoloration of Organic Materials due to Elastomeres (Paint Infifference); Method A: Contact discolouration and environment discoloration due to migration Media resistance, manually |
BMW GS 93011-7-B - Paint indifference; method B: washout effect | Elastomers - Determination of properties, Methods of Test for Determination Discoloration of Organic Materials due to Elastomeres (Paint Infifference); Method B: Determination of the washout effect Media resistance, manually |
BMW GS 93011-8 - Resistance to stress cracking | Elastomers - Determination of Properties, Determination of Resistance to Stress Cracking of Plastics due to Contact with Elastomers Knitterwinkelmessung/ Biegesteifigkeit (hochstehend, hängenden Winkel/ Cantilever) |
BMW GS 93011-9 - Low temperature bending test | Elastomers - determination of properties, Temperature Influence, Low Temperature Bending Test Knitterwinkelmessung/ Biegesteifigkeit (hochstehend, hängenden Winkel/ Cantilever) |
BMW GS 93012-1: Elastomers - Heat aging | |
BMW GS 93012-2: Elastomers - Determination of the resistance to test oils | |
BMW GS 93012-4: Elastomers - Determination of the resistance to cooling liquids | |
BMW GS 93012-5: Elastomers - Determination of the resistance to brake fluids | |
BMW GS 93012-6: Elastomers - Determination of the resistance to test grease | |
BMW GS 93026-1 § 5.1.3 - Fastness to water spotting | Textiles of the vehicle interior - requirements and testing; § 5.1.3 - Fastness to water spotting Media resistance, manually |
BMW GS 93026-1: Textiles of the vehicle interior - Requirements and testings | Standard requirements for textiles used in the vehicle's interior. |
BMW GS 93026-1: Textiles of the vehicle interior - Requirements and testings | Standard requirements for textiles used in the vehicle's interior. |
BMW GS 93034: Cold curing adhesives - Basic properties | |
BMW GS 93036 - Light Weight Reinforced Thermoplast (LWRT) in the exterior | Light Weight Reinforced Thermoplastics (LWRT) as acoustically-effective plastic fiber materials with reinforced fibers (mainly glass fibers pressed in a compound) in the vehicle exterior (underfoor) |
BMW GS 93039: PVC artificial leather for upholstery area - Requirements and tests | For PVC artificial leather (PVC-P) for upholstery area and adjoining areas irrespective of vehicles. |
BMW GS 93042: Thermoplastic Elastomers (TPE), Requirements and Tests | Materials and components made of thermoplastic elastomers |
BMW GS 93043: Soft foam materials - Designation, requirements and tests | For soft foam materials |
BMW GS 93045: Decorative interior surfaces - Requirements and tests | decorative covers |
BMW GS 93048: Grained foam foils for trim parts, Requirements and tests | Grained foam foils (TPO and PVC) for the interior |
BMW GS 93052-1: Unpainted plastic surfaces in the exterior - Thermoplastics | |
BMW GS 94007 - painted plastic parts in the exterior | For all painted plastic parts (single and multi-layer coatings) for conformation |
BMW GS 94007: Coatings on plastic parts - Painted plastic parts - Requirements and tests | For all painted plastic parts (single-coat and multi-coat painting) in the exterior, engine compartment and interior of motorcars. |
BMW GS 94007: Coatings on plastic parts - Painted plastic parts - Requirements and tests | For painted plastic parts (single and multi-layer finishes) in exterior, interior and engine compartment. |
BMW GS 94007: Coatings on plastic parts - Painted plastic parts, Requirements and tests | For all painted plastic parts (single-coat and multi-coat painting) in the exterior, engine compartment and interior of motorcars. |
BMW GS 95024-3-1: Electrical and electronic components in motor vehicles - Environmental requirements and testings | For electric, electronic and mechatronic components and systems in motor vehicles up to 3.5 t. |
BMW GS 97012: Trim parts with PVC-Slush coating | Delivery and quality conditions of PVC-Slush coating in the vehicle interior. |
BMW GS 97012: Trim parts with PVC-Slush coating | Delivery and quality conditions of PVC-Slush coating in the vehicle interior. |
BMW GS 97013 - Trim parts with PUR-Sprayskin coating - Delivery and test conditions | PUR-Sprayskin coating in the vehicle interior (generally for trim components and for complete instrument panels based on a laminar (multi-coat) design featuring backing material and foam-backed PUR-Sprayskin coating) |
BMW GS 97014-2 - Emissions measurement in SHED chambers (CARB test) | Emissions measurement in SHED chambers - Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel Emission chamber tests |
BMW GS 97014-2 including CARB screening - Emissions measurement in SHED chambers (CARB test) | Emissions measurement in SHED chambers - Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel (including CARB screening) Emission chamber tests |
BMW GS 97014-2, based on - Emissions measurement in SHED chambers (CARB test) | Emissions measurement in SHED chambers - Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel Emission chamber tests |
BMW GS 97014-2: CARB-Test (including screening if required) | Emissions measurement in SHED chambers |
BMW GS 97014-3 - Emissions measurement with air exchange in a testing chamber (summer test) | Emissions measurement with air exchange in a testing chamber - Determination of volatile, organic emissions from components semi-finished products and materials Emission chamber tests |
BMW GS 97014-3 - Emissions measurement with air exchange in a testing chamber (summer test) | Emissions measurement with air exchange in a testing chamber, Determination of volatile, organic emissions from components semi-finished products and material. Emission chamber tests |
BMW GS 97014-4 - Determination of the olfactory behavior | Emissions measurement with air exchange in a testing chamber - Determination of the olfactory behavior (The odor test must be carried out together with the chamber emission test acc. to BMW GS 97014-3.) Odor tests (olfactometry) |
BMW GS 97017 § 5.6 - Russian mud test | Coatings on plastic parts, Electroplated plastic parts, Requirements, tests - § 5.6 Russian mud test Corrosion test (e.g. salt spray test) |
BMW GS 97017: Coatings on plastic parts - Electroplated plastic parts | For electroplated and partly electroplated parts made of thermoplastics with copper-nickel-chrome coatings. |
BMW GS 97017: Coatings on plastic parts - Electroplated plastic parts - Requirements, tests | For electroplated and partly electroplated parts made of thermoplastics with copper-nickel-chrome coatings. |
BMW GS 97017: Coatings on plastic parts - Electroplated plastic parts - Requirements, tests | For electroplated and partly electroplated parts made of thermoplastics with copper-nickel-chrome coatings. |
BMW GS 97034-1 - Manual abrasion test | Surface test of motor vehicle interior materials Surface test-Abrex |
BMW GS 97034-1 - Manual abrasion test (Abrex) | Surface test of motor vehicle interior materials - Manual abrasion test Surface test-Abrex |
BMW GS 97034-2 - Finger nail test | Surface test of motor vehicle interior materials, Finger nail test - replaced PR 307.4 (5.2) Surface test-Abrex |
BMW GS 97034-2 - Finger nail test | Surface test of motor vehicle interior materials Surface test-Abrex |
BMW GS 97034-3 / PR 513 - Shoe sole test | Surface test of motor vehicle interior materials - Shoe sole test Surface test-Abrex |
BMW GS 97034-3 / PR 513 - Shoe sole test with Abrex test device | Surface test of motor vehicle interior materials - Shoe sole test with Abrex test rig Surface test-Abrex |
BMW GS 97034-4-A - Color abrasion behavior | Surface test of motor vehicle interior materials - Color abrasion behavior Surface test-Abrex |
BMW GS 97034-4-A - Color abrasion bevaviour (Abrex) | Surface test of motor vehicle interior materials - Color abrasion bevaviour (Test procedure A: Abrex) Surface test-Abrex |
BMW GS 97034-4-B - Color abrasion behavior (Crockmeter) | Surface test of motor vehicle interior materials - Color abrasion behavior Abrasion tester APG |
BMW GS 97034-4-B - Color abrasion bevaviour (Crockmeter) | Surface test of motor vehicle interior materials - Color abrasion bevaviour (Test procedure B: Crockmeter) Abrasion tester APG |
BMW GS 97034-4-C - Color abrasion behavior (Veslic) | Surface test of motor vehicle interior materials - Color abrasion behavior Abrasion tester APG |
BMW GS 97034-4-C - Color abrasion bevaviour (Veslic) | Surface test of motor vehicle interior materials - Color abrasion bevaviour (Test procedure C: Veslic) Abrasion tester APG |
BMW GS 97034-5-A - Resistance to cleaning agents | Surface test of motor vehicle interior materials - Resistance to cleaning agents Surface test-Abrex |
BMW GS 97034-5-A - Resistance to cleaning agents (Abrex) | Surface test of motor vehicle interior materials - Resistance to cleaning agents (Test procedure A: Abrex) Surface test-Abrex |
BMW GS 97034-5-B - Resistance to cleaning agents | Surface test of motor vehicle interior materials - Resistance to cleaning agents Abrasion tester APG |
BMW GS 97034-5-B - Resistance to cleaning agents (Crockmeter) | Surface test of motor vehicle interior materials - Resistance to cleaning agents (Test procedure B: Crockmeter) Abrasion tester APG |
BMW GS 97034-5-C - Resistance to cleaning agents | Surface test of motor vehicle interior materials - Resistance to cleaning agents Abrasion tester APG |
BMW GS 97034-5-C - Resistance to cleaning agents (Veslic) | Surface test of motor vehicle interior materials - Resistance to cleaning agents (Test procedure C: Veslic) Abrasion tester APG |
BMW GS 97034-6 B - Soiling behavior and cleaning ability (martindale) | Surface test of motor vehicle interior materials - Soiling behavior and cleaning ability B Martindale |
BMW GS 97034-6-A - Soiling behavior and cleaning ability (Abrex) | Surface test of motor vehicle interior materials, soiling behavior and cleaning ability (Test procedure A: Abrex) Surface test-Abrex |
BMW GS 97034-6-A - Soiling behavior and cleaning ability (Abrex) | Surface test of motor vehicle interior materials - Soiling behavior and cleaning ability - A Surface test-Abrex |
BMW GS 97034-6-B / BMW PR 121.3 - Soiling behavior and cleaning ability (Martindale) | Surface test of motor vehicle interior materials, soiling behavior and cleaning ability (Test procedure B: Martindale) Martindale |
BMW GS 97034-7 - Drop test | Surface test of motor vehicle interior materials, drop test Drop tests (eg. ball drop test) |
BMW GS 97034-8 - Determination of the scratch inclination | Surface test of motor vehicle interior materials, determination of the scratch inclination Scratch tests, instrumental |
BMW GS 97034-8 - Determination of the scratch inclination | Surface test of motor vehicle interior materials - Determination of the scratch inclination Scratch tests, instrumental |
BMW GS 97034-8, based on - Determination of the scratch inclination | Surface test of motor vehicle interior materials - Determination of the scratch inclination Scratch tests, instrumental |
BMW GS 97034-9 - Scratch test | Surface test of motor vehicle interior materials, scratch test Scratch tests, instrumental |
BMW GS 97034-9 - Scratch test | Surface test of motor vehicle interior materials - Scratch test Scratch tests, instrumental |
BMW GS 97034-9, based on - Scratch test | Surface test of motor vehicle interior materials Scratch tests, instrumental |
BMW GS 97036 - DMA | Dynamic mechanical analysis (DMA) on polymers and adhesives Thermogravimetrie (TGA) / DSC |
BMW GS 97038 - Burning behaviour | Determination of burning behavior to automotive interior trim materials Burning test |
BMW GS 97045-2 - Painted plastic parts in exterior, interior and engine compartment | For painted plastic parts (single-coat and multi-coat painting) in exterior, interior and engine compartment. |
BMW GS 97045-2: Painted plastic parts in exterior, interior and engine compartment | For all painted plastic parts (single-coat and multi-coat painting) in exterior, interior and |
BMW GS 97045-2: Painted plastic parts in exterior, interior and engine compartment | For all painted plastic parts (single-coat and multi-coat painting) in exterior, interior and engine compartment. |
BMW GS 97050: Trim parts with IMC-TPU-Slush coating | e.g. complete instrument panels |
BMW GS 97069 - Sound-insulation components in motor vehicles, Testing of adhesive strength | to sound-insulation components of pressure-sensitive (self-adhesive) nature or with applied glue, bonded to painted or unpainted body panels or non-metallic components |
BMW GS 97079: Coatings on plastic parts - Painted and dyed plastic parts on motorcycles - Requirements and testings | |
BMW GS 97102: PVD coatings on stainless steel surfaces and chromed surfaces | For decorative, physical vapour deposition coated (PVD) stainless steel and chromed surfaces. |
BMW LH 10121464-000-03: Requirement Specification - Soundproofing Engine Compartment | Soundproofing of the engine compartment |
BMW LH 10304977-000-04: Trunk compartment trim | Trunk compartment trim |
BMW LH 10304977-000-06: Trunk compartment trim | Trunk compartment trim |
BMW LH 10358294-000-05: Requirements Specification UBV MAS Rear Diffusor | UBV (underside panel), MAS (engine compartment panel), rear diffusor |
BMW LH 10358740 - 000 - 03: Trunk lid cover | |
BMW LH 10437233-000-03: Trunk trim panels G 32 | Trunk trim panels G 32 |
BMW LH 10506573-000-02: Requirements specification - G01 - Floor covering, insert, footrest | Floor covering, insert, footrest |
BMW LH 10506583-000-02: Injection molded components for trim parts below | Injection molded components for trim parts below |
BMW LH 10511919-000-01 F45: Trunk compartment trim | Trunk compartment trim |
BMW LH 10513190-000-02: Requirement Specification - Sound Proofing Engine Compartment | Sound Proofing Engine Compartment |
BMW LH 10518160-000-04: Requirements specification - Trunk compartment trim | Trunk |
BMW LH 10541649-000-02: Requirements Specification - G20 - Floor covering, inserts, footrest | |
BMW LH 10584675-000-02: Requirement Specification - Rear heater duct front | Rear heater duct front |
BMW LH 10608151-000-03: Requirements specification - Luggage compartment G05 | Luggage compartment |
BMW LH 10617891-000-01:Requirements Specification - G20 - Rear window shelf and additional components | |
BMW LH 10709580-000-01: Requirements Specification - G2x Jet Wiper Request for Development | |
BMW LH 10824701-000-01: Firts Aid Kit | First aid kit |
BMW LH 11014253-000-01: Requirements Specification Wheelhouse Cover | |
BMW N 600 91.0, Teil 33: Special requirements for paints, painting of plastic parts | Single and multi-layer coatings of plastic parts in the body interior and exterior |
BMW PA C-307 / TD_G_CB_SOP_5.4_111_G_0 (GC-MS) - Determination of phthalates | Determination of Phthalates in air using GC-MS GC-MSD Measurements |
BMW PA-N 150 - Mass and thickness of effective pile per unit area and stitch rate | Determination of mass of effective pile per unit area above backing, of effective pile thickness and stitch rate for carpets and floor mats, band knife shearing machine method Thickness measurement |
BMW PA-P 028 - Cross hatch testing | Cross hatch testing Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW PA-P 100 - Gloss measurement | Reflectometer value (gloss) Gloss measurements |
BMW PA-P 208 - Condensation water constant atmosphere test | Condensation Water Constant Atmosphere Test Condensation water atmosphere climatic tests |
BMW PA-P 230 - Aging resistance test | Aging resistance test Heat storage (constant temperature) |
BMW PA-P 231 - Temperature cycle test | Temperature Cycle Test Storage under changing climatic/ temperature conditions |
BMW PA-P 250 - Visual color Comparison and Metamerism Test | Visual color Comparison and Metamerism Test Reviews / assessments with standards, visual assessment of samples |
BMW PA-P 295 - Paint Compatibility with Sun Screen Lotion | Paint Compatibility of Interior Parts with Sun Screen Lotion Media resistance, manually |
BMW PA-P 315 - Abrasion resistance using the Abrex test equipment | Abrasion Resistance using the ABREX Test Equipment (dry + test media according to BMW AA-P 077) Surface test-Abrex |
BMW PR / TS 208: TS Finishers and trim strips in the door area and side frame | |
BMW PR / TS 208: TS Finishers and trim strips in the door area and side frame | |
BMW PR 100.3: PR aperture A-, B-, C- and D-pillar | For pillar trim (and the windshield finisher, air exit grille, rollover protection system cover for cabriolets), including the direct attachment parts. |
BMW PR 100.4: Trim panels A-, B-, C- and D-pillar | Trim panels A-, B-, C- and D-pillar, for pillar trim, including the direct attachment parts |
BMW PR 100.6: Trim panels A-, B-, C- and D-pillar | Trim panels A-, B-, C- and D-pillar, for pillar trim, including the direct attachment parts |
BMW PR 100§2.8.3.1 - Stiffness test | BMW PR 100§2.8.3.1 Stiffness test Deformation, elasticity measurements |
BMW PR 102.4 § 2.4.3 - Air permeability | Determination of air permeability of sample plates (Headliner) Luftdurchlässigkeitsprüfung |
BMW PR 102.6: Headliner with attachments | Headliner with attachments |
BMW PR 102.7: Headliner with attachments | Headliner with attachments |
BMW PR 104 §2.6.4.5 - Endurance test | BMW PR 104 §2.6.4.5 - Seat belt outlet finisher endurance test Continuous operation (programmable logic controller) |
BMW PR 104.3: Test specification - Rear shelf with add-on parts | For fixed, movable and multi-part storage shelves - including the direct mounting parts. |
BMW PR 104.4: Test specification - Rear shelf with add-on parts | For fixed, movable and multi-part storage shelves - including the direct mounting parts. |
BMW PR 104.5: Rear shelf with add-on parts | Fixed, movable and multi-part storage shelves, including the direct mounting parts |
BMW PR 121.2 - Staining and Cleanability | Staining and Cleanability behaviour of surface material Martindale |
BMW PR 121.3 - Staining and Cleanability | Staining and Cleanability behaviour of surface material Martindale |
BMW PR 121.4 - Soiling behavior and cleaning ability of surface materials | Soiling behavior and cleaning ability of surface materials Martindale |
BMW PR 211: TS Trunk lid | Trunk lid |
BMW PR 212: TS Automatic trunk lid with spindle drives (SA316) | BMW PR 212: TS Automatic trunk lid with spindle drives (SA316) |
BMW PR 213: TP Hood | Hood |
BMW PR 220 - Determination of dent resistance | dent resistance plastic outer skin Force measurement |
BMW PR 223.2 - Determination of Buckling strength / Buckling resistance | Buckling strength / Buckling resistance outer panel Force measurement |
BMW PR 226: Cover wind screen panel | |
BMW PR 231 (Florida- Mode) - Weather resistance (humid-warm climate, e.g. Florida) | Artificial weathering: outdoor use / Florida mode Exposure / weathering with major equipment (Xenon) |
BMW PR 231 (Florida-mode) - Resistance to weathering (humidity-warm climate, e.g. Florida) | Simulated Weathering of external parts / Florida-mode Exposure / weathering with major equipment (Xenon) |
BMW PR 231 (Kalahari-mode) - Resistance to weathering, dry-hot climate (e.g. Kalahari, Arizona, South America) | Simulated Weathering of external parts / Kalahari-mode Exposure / weathering with major equipment (Xenon) |
BMW PR 231 (Kalahari-mode) - Resistance to weathering, dry-hot climate (e.g. Kalahari, Arizona, South America) | Simulated Weathering of external parts / Kalahari-mode Exposure / weathering with major equipment (Xenon) |
BMW PR 231: TS Seal system doors | Seal system doors |
BMW PR 231: TS Seal system doors and lids | Seal system doors and lids |
BMW PR 231: TS Seal system doors and lids | Seal system doors and lids |
BMW PR 292 § 2.1.20 - Pyrolysis-GC/MS | Attachments underbody - gas chromatography / mass spectrometry (Pyrolysis-GC-MS) GC-MSD Measurements |
BMW PR 292: PR Add-on parts underbody | |
BMW PR 292: PR Attached parts underbody | The test specification describes the protection of attachted parts at the underbody |
BMW PR 292: PR Underbody Add-on Parts | |
BMW PR 303.4 - Climate cycle test | Climate cycle test for equipment parts Storage under changing climatic/ temperature conditions |
BMW PR 303.5 - Climate cycle test | Climate cycle test for equipment parts Storage under changing climatic/ temperature conditions |
BMW PR 306.4 (based on) - Sun simulation | Sun simulation for equipment parts Solar simulation |
BMW PR 306.4 - Sun simulation | Sun simulation for equipment parts Solar simulation |
BMW PR 306.4 c - Sun simulation | Sun simulation - Part c: direct radiation of exterior and interior parts (test environment c, 85 °C) Solar simulation |
BMW PR 306.5 part a - Solar simulation | Solar simulation for trim parts, part a: Instrumental panel, Rear shelf Solar simulation |
BMW PR 306.5 part b - Solar simulation | Solar simulation for trim parts, part b: Door trim panel Solar simulation |
BMW PR 306.5 part c - Solar simulation (behind horizontal glass pane) | Solar simulation for trim parts, part c: Test behind horizontal glass pane Solar simulation |
BMW PR 306.5 part d - Solar simulation | Solar simulation for trim parts, part d: Other interior components Solar simulation |
BMW PR 306.5 part e - Solar simulation | Solar simulation for trim parts, part e: Exterior add-on parts Solar simulation |
BMW PR 306.5 part f - Solar simulation (complete vehicle) | Solar simulation for trim parts, part e: Complete vehicle Solar simulation |
BMW PR 307.4 § 2.1 - Gloss test | Evaluation of the sensitivity of component surfaces against scratching, § 2.1 Gloss test Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW PR 307.4 § 2.2 - Cutting test | Evaluation of the sensitivity of component surfaces against scratching, § 2.2 Cutting test Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW PR 307.4 § 5.1 - Abrasion test with steel wool | Evaluation of the sensitivity of component surfaces against scratching, § 5.1 Abrasion test with steel wool Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW PR 307.4 § 5.3 - Drop test | Evaluation of the sensitivity of component surfaces against scratching, § 5.3 drop test Drop tests (eg. ball drop test) |
BMW PR 307.4: Assessment of sensitivity of component surfaces from scratches | |
BMW PR 308.1 - Climatic testing of adhesive joints | Climatic testing of adhesive joints of equipment parts Storage under changing climatic/ temperature conditions |
BMW PR 308.2 - Climatic test for bonded joints and composite materials on trim parts | Climatic testing of adhesive joints and material bonds of equipment parts Storage under changing climatic/ temperature conditions |
BMW PR 309.1: Test specification - Vibration test for equipment components | for instrument panels with all add-on-parts |
BMW PR 309.2 (BMW PR 303.5) - Vibration test | Vibration test for trim components - in combination of different components Vibrationsprüfungen |
BMW PR 311.2 - Measurement of annoying noise (rattling/creaking) for components and overall vehicle | Annoying noise test / Shaker test Vibrationsprüfungen |
BMW PR 326.5: TS Vehicle door | Vehicle door |
BMW PR 327.1: Electric side roller sunblinds | |
BMW PR 341: TR Front / Rear Bumper | BMW PR 341: TR Front / Rear Bumper |
BMW PR 345: TS Rocker panel / Running board | Rocker panel / Running board |
BMW PR 357 - Dimensional stability | Determination of dimensional stability of car interior lining and seat lining under climatic extremes Length measurement / Curling (test equipment from 0 to 0.5 m) |
BMW PR 360 - Abrasion using Taber | Abrasion using Taber Taber |
BMW PR 360 - Abrasion using Taber | Abrasion using Taber Taber |
BMW PR 362 - Determination of volatile substances in leather (moisture measurement) | Determination of volatile substances in leather (moisture measurement) Weighing, determination of mass and mass change (residue on ignition, dry residue), density |
BMW PR 363.1 - Cleanability after soiling with Smoking Flour and Finery- and Wall Sand | Cleaning ability of surface materials with Smoking Flour and Finery- and Wall Sand Martindale |
BMW PR 364 - Water capillarity | Water capillarity test for threads Media resistance, manually |
BMW PR 368 - Seam strength | Seam strength for textiles Universal testing machine, tensile, bending, tear tests .. |
BMW PR 372 § 2.1.6.1 - Weight load static | BMW PR 372 - weight load static Deformation, elasticity measurements |
BMW PR 372 § 2.1.6.2 - Weight loading dynamic | BMW PR 372 - Weight loading dynamic Drop tests (eg. ball drop test) |
BMW PR 372 §2.1.7.1 - Rigidity test | BMW PR 372 §2.1.7.1 - rigidity test Deformation, elasticity measurements |
BMW PR 372 §2.1.7.1 - Stiffness test | BMW PR 372 §2.1.7.1 - Stiffness test Deformation, elasticity measurements |
BMW PR 372.3: Plastic parts in the trunk and passenger compartment bottom | e.g. side trim, floor area |
BMW PR 375.2: Textile lining parts and sound insulation in the luggage compartment | e.g. Cover luggage bowl, shelf, insert mat |
BMW PR 375.4: textile trim panels in the trunk | e.g. Cover luggage bowl, shelf, insert mat |
BMW PR 375.5: Textile trim components in the luggage compartment | e.g. cover (trunk floor, cross member), trunk floor panel, liner mat, trim panel trunk well |
BMW PR 376.1: Clamping / stowing elements and mounts in the trunk | Clamping / stowing elements and mounts in the trunk, e.g. Tensioning pulley: Tensioning straps, stowing nets, flex nets Stowing elements: folding boxes, folding baskets, drawers, storage compartments, storage trays |
BMW PR 380 § 2.2.5 (based on DIN 54310) - Adhesion test | Floor mats - Separating force between the backing and pad (based on DIN 54310) Universal testing machine, tensile, bending, tear tests .. |
BMW PR 380.3 § 2.3.1 (based on DIN EN 388) - Piercing force | Test specification for floor mats - Functional tests - Mechanical requirements; § 2.3.1: piercing force (puncture force) based on DIN EN ISO 388 Impact bending tests (eg Charpy, Izod, Dynstat) |
BMW PR 380.4 § 2.2.1 (following DIN EN 388) - Puncture force | Test specification - Floor Mats Impact bending tests (eg Charpy, Izod, Dynstat) |
BMW PR 380.4: Floor Mats | Floor Mats |
BMW PR 381.4: Floor trim | Floor trim |
BMW PR 384.1 - Recess test | Recess test Continuous operation (programmable logic controller) |
BMW PR 387.1: Sealing side frames | e.g. for parts in the area of the engine compartment |
BMW PR 388: Engine Compartment Sound Insulation | Engine Compartment Sound Insulation |
BMW PR 389.1: Passenger compartment SI and trunk SI - Test specification | |
BMW PR 397 - Rotting Consistency | Rotting Consistency Rotting / mold formation |
BMW PR 397 - Rotting Consistency | Rotting Consistency Rotting / mold formation |
BMW PR 399 - Edge Thread withdrawal force | Edge Thread withdrawal force Universal testing machine, tensile, bending, tear tests .. |
BMW PR 401 - Felting Resistance | Felting Tendency of Velours and Dilour Carpet Qualities Martindale |
BMW PR 401 - Felting tendency | Felting Tendency of Velours and Dilour Carpet Qualities Martindale |
BMW PR 501 Part 1 - Jar test | Evaluation of the interaction of materials in interioir parts Odor tests (olfactometry) |
BMW PR 501 Part 1 - Jar test | Interaction of PUR materials with polycarbonate-containing thermoplasts in the vehicle interior Odor tests (olfactometry) |
BMW PR 501 Part 2 - Desiccator test | Verification of the interaction of materials in the vehicle interior (desiccator test) Storage under changing climatic/ temperature conditions |
BMW PR 506 - Fingerprint test | BMW: Fingerprint test on surfaces of interior parts Universal testing machine, tensile, bending, tear tests .. |
BMW PR 510: Surface stability of gear shift knob clasps | gear shift knob clasps |
BMW PR 512 - Finger nail test | Finger nail test with the Abrex test rig Surface test-Abrex |
BMW PR 556 - drop test | Resistance of unpainted thermoplastic surfaces in the interior area against creams Media resistance, manually |
BMW PR 557 (Exterior) - Chemical resistance | Resistance unpainted thermoplastic surfaces in the exterior area to media Media resistance, manually |
BMW PR 557 (Interior) - Chemical resistance | Resistance unpainted thermoplastic surfaces in the interior area to media Media resistance, manually |
BMW PR/TS 209: TS Sill finisher | |
BMW PR/TS 228: Test Specification A-pillar moulding / roof ditch moulding | |
BMW PR/TS 282: TS Cladding doors | |
BMW PrV 152 § 2.4 - Resistance to media | Resistance to media Media resistance, manually |
BMW PrV 152: Engine compartment shield and underbody paneling with or without foam backing | Engine compartment shield and underbody paneling with or without foam backing |
BMW PrV 311.1 - Dimensional stability | Determination of dimensional stability of car interior lining and seat lining under climatic extremes Length measurement / Curling (test equipment from 0 to 0.5 m) |
BMW QS 52009: QS PUR foam soft seatrest, backrest and headrest | PUR foam soft, for all parts and assemblies of the front and rear seats. |
BMW QS 52009: QS PUR foam soft seatrest, backrest and headrest; motorcycle seat benches | PUR foam soft, for all parts and assemblies of the front and rear seats. |
BMW QV 51061 § 2.3.2.4 a) - Adhesion of anti friction coatings | Sealing elements, flock- and anti friction coatings; § 2.3.2.4 a): Adhesion of anti friction coatings Scratch, cut and surface tests with small appliance (eg test rod, scalpel) |
BMW QV 51061 § 3.3.1 - Resistance to textile abrasion | Sealing elements, flock- and anti friction coatings; § 3.3.1: Resistance to textile abrasion Abrasion tester APG |
BMW QV 51061 § 3.3.2 - Abrasion from a window glass pane edge | Sealing elements, flock- and anti friction coatings; § 3.3.2: abrasion from a window glass pane edge Abrasion tester APG |
BMW QV 51061 § 3.3.5 - Abrasion resistance of anti-friction coating, gliding material across abrasive cloth | Sealing elements, flock- and anti friction coatings; § 3.3.5: Abrasion resistance of anti-friction coating, gliding material across abrasive cloth Abrasion tester APG |
BMW QV 51061 § 3.5 - Peel off after icing | Sealing elements, flock- and anti friction coatings; § 3.5: Peel off after icing Climate chamber test (constant climate / alternating climate / temperature change) |
BMW QV 51154-3.2.2 (Peel adhesion pad, based on DIN 54310) - Peeling test | QS Floor mats - Separation force between the backing and pad (based on DIN 54310) Universal testing machine, tensile, bending, tear tests .. |
BMW QV 51241: QS for underfloor panelling, underbonnet shielding, wheel arch shells (injection moulded and non-woven) and air guides | Underfloor panelling, underbonnet shielding, wheel arch shells (injection moulded and non-woven) and air guides |
BMW QV 72003 - Part 1: Safety belts for ECE, EG, US / Part 1 - strap | Safety belts for ECE, EG, US |
BMW S 603 00.0 Part 4: Soft cellular materials - Test procedure and allowable tolerances | For flexible cellular materials and / or components. |
BMW S 60300.0 Teil 4, § 3.11 (based on DIN 53428-F) - Water absorption | Soft foams - Test method and acceptable tolerances; § 3.11: Water absorption (based on DIN 53 428 F: Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials) Weighing, determination of mass and mass change (residue on ignition, dry residue), density |
BMW Specs 2 754 531.6 - Carpet footwell mat 2 | Carpet footwell mat for the interior trim |
BMW Specs 2 754 531.6 - Carpet footwell mat 2 | Carpet footwell mat for the interior trim |
BMW Specs 8 165 341.6 - Carpet footwell mat 1 | Carpet footwell mat for the interior trim |
BMW TL 1 848 495.6: Spec's Fibre MF fleece for sound insulation and thermal insulation | Fibre fleece for the interior trim |
BMW TL 1 848 495.6: Specs Fibre Fleece Sound Insulation | For fibre fleece for the interior trim. |
BMW TL 1 932 797.6 - Specs Webbing | Specs Webbing |
BMW TL 1 932 797.6: Spec's Webbing | Webbing for the interior trim |
BMW TL 6 951 680.6 - Tufting-Carpet Eurovelours 70 | Tufting-Carpet |
BMW TL 6 961 179.6: Specs Sound Insulation Light Weicht Non Woven | Fibre fleece for the interior trim |
BMW TL 7 028 459.6 - Specs Elastic band 2 (textile) | elastic bands for the interior trim |
BMW TL 7 044 213.4 - Specs ABS+PC Recyclat | e.g. Support Center Console, Reinforcement Door Pocket |
BMW TL 7 056 938.6: Specs Attachement Strip | For attachement strip for the interior trim. |
BMW TL 7 065 938.6: Spec's Distance knit fabrics | |
BMW TL 7 069 008.6: Specs PVC Imitation Leather for Bellows | |
BMW TL 7 117 860.6: Spec's Flat needle non-woven 3 | for Decor flat needle non-woven for interior trim |
BMW TL 7 145 612.6 -Specs Tufting -Carpet 2003 | |
BMW TL 7 150 150.6 - Tufting Carpet Eurovelours 91 | Tufting Carpet |
BMW TL 7 302 281.6: Specs - Allweather Floormat | Allweather Floormats for cars |
BMW TL 7 305 243.6: Specs Shear dilour trunk | For Non-woven velours the interior |
BMW TL 7 305 243.6: Specs Shear dilour trunk 12 | For Non-woven velours the interior |
BMW TL 7 311 282.6: Tufting-Carpet Velvet velours hight | Tufting-carpet for the interior trim - Delivery conditions and quality for planar initial materials in as-delivered condition and, in part, for finished parts as well |
BMW TL 7 334 912.6: Specs PUR Imitation Leather 1 | PUR imitation leather for interior trim |
BMW TL 7 378 491: Spec's knitted trim fabric - Boston | Knitted trim fabric, e.g. headlining, parcel shelf, pillars, sun visor |
BMW TL 7 402 630.6: Specs PVC-Imitation leather 18 light quality, Grain 80 | PVC-Imitation leather |
BMW TL 7 402 630.6: Specs PVC-Imitation leather 18 light quality, Grain 80 | PVC-Imitation leather |
BMW TL 7 402 630.6: Specs PVC-Imitation leather 18 light quality, Grain 80 | Specs PVC-Imitation leather 18 light quality, Grain 80 |
BMW TL 7 411 703.6: Specs PVC-Foam sheet grain "Verona" (80) | For PVC-Foam sheet for the interior trim. For sheet in as-delivered condition and, in part, for laminated components as well. |
BMW TL 7 411 705.6: Specs TPO-Foam with grain "Verona" (80) | For TPO-Foam sheet for the interior trim. For sheet in as-delivered condition and, in part, for laminated components as well. |
BMW TL 7 422 824.6: Specs PVC-Imitation leather 22, standard quality Grain 80 | PVC-Imitation leather |
BMW TL 7 422 824.6: Specs PVC-Imitation leather 22, standard quality Grain 80 | PVC-Imitation leather |
BMW TL 7 453 047.6: Spec's Shear dilour high trunk | For Non-woven velours the interior (Trunk) |
BMW TL 7 458 355.6: Specification PVC-Imitation leather, standard quality Grain Ray | PVC-Imitation leather |
BMW TL 7 458 356.6: Specification PVC-Imitation leather light quality, Grain Ray | PVC-Imitation leather |
BMW TL 7 458 357.6: Specification PUR imitation leather optimized haptics, Grain 80 | |
BMW TL 7117860.6: Flat needle non woven 3 | for Decor flat needle non woven for interior trim |
BMW TL 7117860.6: Spec's Flat needle non-woven 3 | for Decor flat needle non-woven for interior trim |
BMW TL 8 090 463: Specs Knitted Trim Fabric Tacheny | Knitted trim fabric for Headlining, Pillar cover, Parcel shelf |
BMW TL 8 121 649.6: Spec's Safety net | Safety nets for the interior trim |
BMW TL 8 127 520.6 - Specification - Sun-Protective knitted fabric | Sun-Protective knitted fabric |
BMW TL 8 127 520.6 - Specs Sun-Protective knitted fabric | Sun-Protective knitted fabric |
BMW TL 8 127 520.6 - Specs Sun-Protective knitted fabric | Sun-protective knitted fabric for the interior trim |
BMW TL 8 127 520.6: Spec Sun-Protective knitted fabric | Sun-protective knitted fabric for the interior trim |
BMW TL 8 165 341.6: Carpet footwell mat 1 | Carpet footwell mat for the interior trim |
BMW TL 8 186 875.4 - Specs Knitted Band | knitted Band for the interior trim |
BMW TL 8 236 276.6: Luggage net PA | Luggage net for interioor trim |
BMW TL 8 262 216.6 - Specs Ski Bags Material | Ski Bag Material |
BMW TL 9 149 156.6: Specs PP-Glass fibre recyclat | Rear shelf material for the interior trim |
BMW TL 9 169 300.6: Leather all | Leather for the interior trim |
BMW TL 9 169 300.6: Spec's Leather all | Leather for the interior trim |
BMW TL 9 192 340.6: Specs Luggage net PP | Luggage nets for the interior trim |
BMW TL 9 210 275.6: Spec's PVC Imitation leather 14 Grain 60 | PVC Imitation leather |
BMW TL 9 211 895.6: Technical Delivery Specification - Sound insulation light weight non woven (PP/PET) | For light weight non woven for the interior trim. |
BMW TL/Spec's 8 116 999.6: Technical Delivery Specification Flock | Flock for the interior trim |
BMW TL/Specs 6 958 374.6: Technical Delivery Specification non-woven | non-woven and non-woven insert for the exterior trim |
BMW TL/Specs 7 289 355.6: Renewable Vegetable For Visible Carrier Materials | Renewable vegetable raw materials for the interior trim |
BMW TL/Specs 7 340 490.6: Compression moulded material 10 | Compression moulded material for the interior trim |
BMW TL/Specs 7 382 291.6: PVC Imitation leather 17 | PVC imitation leather |
BMW TL/Specs 7 411 853.6: Specs PVC-Imitation leather optimized haptics grain Verona | PVC-Imitation leather optimized haptics for the interior trim |
BMW TL/Specs 7 478 493.6: Sound insulation air conduct | light weight non woven for the interior trim |
BMW TL/Specs 8 171 142.6 - Pull rope | Pull ropes for the interior trim, for planar initial materials in as-delivered condition and, in part, for finished parts as well |
BMW TL/Specs 9 165 280.6: PVC Imitation leather 11 | PVC imitation leather |
BMW TL/Specs 9 199 920.6: PVC imitation leather 13 | PVC imitation leather |
BMW TL/Specs 9 211 895.6: Technical Delivery Specification - Sound insulation light weight non woven (PP/PET) | Light weight non woven for the interior trim |
BMW TL/Specs 9 211 895.6: Technical Delivery Specification - Sound insulation light weight non woven (PP/PET) | Light weight non woven for the interior trim |
BMW TL/Specs 9 221 359.6: Tufting-Carpet velvet velours light | Tufting-carpet for the interior trim - Delivery conditions and quality for planar initial materials in as-delivered condition and, in part, for finished parts as well |
BMW TL/Specs 9 221 359.6: Tufting-Carpet velvet velours light | Tufting-carpet for the interior trim - Delivery conditions and quality for planar initial materials in as-delivered condition and, in part, for finished parts as well |
BMW TLS/pecs 7 120 399.6: Upholstery wadding '02 | Upholstery wadding for the interior trim |
BMW TS 100.1 § 4.2 - Decor adhesion | Test specification; § 4.2: Decor adhesion Universal testing machine, tensile, bending, tear tests .. |
BMW-Net, Total elongation (based on DIN 53360) - Static and permanent elongation | Determination of the total elongation (statical elongation) and permanent elongation / required for example in TL 9192340.6, § 3.3.3 Measurements of static stretching |
BMW-Net, Total elongation at climate (based on DIN 53360) - Static and permanent elongation (climate cycle test) | Determination of the total elongation at climatic cycle test (statical elongation) and permanent elongation at room temperature / required for example in TL 9192340.6, § 3.3.3 Measurements of static stretching |
Bonded coating adhesion | General method for determination of the bonded coating adhesion on elastomer seals by means of elongation on a universal testing device Universal testing machine, tensile, bending, tear tests .. |
Bow and skew measurement | Standard test method for Bow and Skew in woven and knitted fabric - general method Length measurement / Curling (test equipment from 0 to 0.5 m) |
Brasilien Res. CONTRAN 675 - Burning behaviour | Regulations for materials which are used for lining the interior of vehicles and other provisions - Burning behaviour of interior materials Burning test |
Brose BN 591165-101 part 1 - Flammability | Flammability of interior materials Burning test |
BS 1006 - Waterdrop test | Color fastness to spotting: water Media resistance, manually |
Buckling stress / crease test | Buckling stress Knitterwinkelmessung/ Biegesteifigkeit (hochstehend, hängenden Winkel/ Cantilever) |
BWM AA-0055: Chemical resistance test of surfaces | This work instruction describes the test media and methods used in the chemical resistance test |
BWM AA-0055: Chemical resistance test of surfaces |