imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
DAF KEUR 00821-024 - Resistance to rotting (Fungoid growth) Fungoid growth on interior panels
DAF KEUR 00822-104 - Determination of the tearing strength Covering Materials - Determination of the tearing strength
DAF KEUR 00822-108 - Color fastness to rubbing

Covering materials - Determination of the color fastness to rubbing

DAF KEUR 00822-113 - Shrinkage by moisture Covering materials - Determination of the shrinkage caused by the influence of moisture
DAF KEUR 00822-116 - Resistance to wear (Taber) Covering materials - Determination of the resistance to wear
DAF KEUR 00822-120 - Determination of the fogging Determination of the fogging of plastics (reflectometric)
DAF KEUR 00824-101 - Gloss measurement Measurement of the gloss
DAF KEUR 00824-401 - Cross-cut test Determination of the adhesion of coats of paint on painted parts (cross-cut test)
DAF KEUR 00824-818 - Resistance to test media Resistance to environmental influences, resistance to momentary attacks by automotive fluids. (Drip, cotton wool, or immersion test)
DAF KEUR 00824-825 - Resistance to perspiration Parts and components - Determination of the resistance to attack by perspiration
Daimler A21.10.01, § 4.6 - Tread resistance Standard function test program - Flooring / function, § 4.6 Tread resistance
Daimler AG PAPP PWT 7517 - Determination of nitrosamine emission Measuring the emission of nitrosamines from elastomeric parts used in the passenger compartment
Daimler DBL 5306 § 1.1 - Bending stiffness General technical delivery conditions and test methods for interior equipment materials and similar products; § 1: bending stiffness
Daimler DBL 5306 § 15.2 - Grip indentation measurement General technical delivery conditions and test methods for interior equipment materials and similar products; § 15.2: Grip indentation measurement
Daimler DBL 5306 § 16 - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 19.3 - Coefficient of friction with sliding/sticking friction General technical delivery conditions and test methods for interior equipment materials and similar products; § 19.3: Coefficient of friction with sliding/sticking friction
Daimler DBL 5306 § 2 - Resistance to blocking General technical delivery conditions and test methods for interior equipment materials and similar products; § 2: Resistance to blocking
Daimler DBL 5306 § 20 - Contact staining General technical delivery conditions and test methods for interior equipment materials and similar products; § 20: Contact staining
Daimler DBL 5306 § 25 - Tear-out resistance General technical delivery conditions and test methods for interior equipment materials and similar products; § 25: Tear out resistance; Stitch tear resistance (§ 25.1) or selvege thread pull-out resistance (§ 25.2)
Daimler DBL 5306 § 26.1.1 - Peel adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.1: Peel tensile test in standard atmosphere
Daimler DBL 5306 § 26.1.3 - Shear tensile test in standard atmosphere General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.3: Shear tensile test in standard atmosphere
Daimler DBL 5306 § 26.1.4 - Shear tensile test under heat General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.4: Shear tensile test under heat
Daimler DBL 5306 § 3.1 - Resistance to scratching (with fingernail) General technical delivery conditions and test methods for interior equipment materials and similar products; § 3.1: scratch resistance (fingernail or knife blade)
Daimler DBL 5306 § 3.2 - Exposure to scratching with a chisel General technical delivery conditions and test methods for interior equipment materials and similar products; § 3.2: Exposure to scratching with a chisel
Daimler DBL 5306 § 4.1 (DIN EN ISO 105-X12) - Abrasion resistance General technical delivery conditions and test methods for interior equipment materials and similar products; § 4.1: Abrasion resistance
Daimler DBL 5306 § 6.1 - Heat resistance - Loose exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 6.1: Heat resistance - Loose exposure
Daimler DBL 5306 § 6.2 - Heat resistance - folded exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 6.2: Heat resistance - folded exposure
Daimler DBL 5306 § 7.1 - Cold resistance - folded exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 7.1: Cold resistance - folded exposure
Daimler DBL 5306 § 7.2 - Cold resistance - bending exposure Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 7.2: Cold resistance - bending exposure
Daimler DBL 5306 § 7.3 - Cold resistance - ball drop test Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 7.3: Cold resistance - ball drop test
Daimler DBL 5306 § 8.1 - Permanent deformation after constant load - dry method Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 8.1: Permanent deformation after constant load - dry method
Daimler DBL 5306 § 8.2 - Permanent deformation - wet method General technical delivery conditions and test methods for interior equipment materials and similar products; § 8.2: Permanent deformation after constant load
Daimler DBL 5306 § 9.3 - Soiling behavior (Martindale method, standard soiling material)

Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 9.3: Soiling behavior (Martindale method)

Daimler DBL 5306 § 9.4 - Cleaning behavior

Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 9.4: Cleaning behavior

Daimler DBL 5307 § 5.1 - Flame retardant properties Supply Specification - Flame retardant properties - Interior trim parts - Requirements and test specifications; § 5.1: Test for determination of the horizontal burning rate of materials
Daimler DBL 5399 § 3.2 - Resistance to cleaning and care products Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.2: Resistance to cleaning and care products
Daimler DBL 5399 § 3.3 + 3.4 (Martindale) - Soiling and Cleaning behavior

Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.3 and § 3.4: Soiling and cleanability behavior (Martindale)

Daimler DBL 5399 § 3.3 + 3.4 - Soiling and Cleaning behavior

Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.3 and § 3.4: Soiling and cleanability behavior

Daimler DBL 5404 § 18.7 - Scratch resistance Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 18.7: Scratch resistance, followed by colour measurement
Daimler DBL 5404 § 4.2 - Resistance to care products Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 4.2: Resistance to care products
Daimler DBL 5404 § 7.14 - Resistance to cosmetics Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 7.14: Resistance to cosmetics
Daimler DBL 5404 § 7.15 - Resistance to care agents Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 7.15: Resistance to care agents
Daimler DBL 5404-4.1 (based on DIN EN ISO 22088-3) - Stress cracking Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 4.1: Stress cracking (based on DIN EN ISO 22088-3 Part 3: Bent strip method)
Daimler DBL 5471(AA90-95) § 4.11 - Resistance to abrasion (DIN EN ISO 105-X12) Supply specification - trim panels and molded padded parts for vehicle interiors (compound parts); § 4.11 - Resistance to abrasion (DIN EN ISO 105-X12)
Daimler DBL 5527 - Prevention of galvanic corrosion Supply Specification - Elastomer materials with reduced conductivity (to avoid contact corrosion )
Daimler DBL 5555-II-6.2 (based on DIN EN ISO 4892) - Artificial weathering Supply specification - Finished parts and semi-finished products made of organic polymer materials; § 6.2: artificial weathering (based on DIN EN ISO 4892)
Daimler DBL 5555-II-6.4 - Steam jet test DC, Steam jet test
Daimler DBL 5575 § 10.1 - Abrasion resistance (Crockmeter) Supply specification, Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior, § 10.1 Abrasion resistance (Crockmeter) (for AA 10 / 20 / 21)
Daimler DBL 5575 § 10.2 - Abrasion resistance (Crockmeter) Supply specification, Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior, § 10.2 Abrasion resistance (Crockmeter) (for AA 22)
Daimler DBL 5575 § 6.5.1 - Abrasion resistance (Crockmeter) Supply specification, Textile flocked elastomer parts for body sealants and plastic parts for the vehicle interior, § 6.5.1 Abrasion resistance (Crockmeter)
Daimler DBL 5578, Annex AK 2.1 § 22 - Steam jet test Supply Specification - Elastomer parts with anti-friction coating, Annex AK 2.1 § 22: Steam jet test
Daimler DBL 5578, Tab. 2, 4.11 (crockmeter) - Abrasion test, crockmeter Supply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion test, crockmeter
Daimler DBL 5578, Tab. 2, 4.11 (profile edge) - Abrasion test over profile edge Supply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion test over profile edge
Daimler DBL 7382 § 9.13 - Evaluation of corrosion grade, surface corrosion Supply specification - Coating of metallic parts in vehicle interiors: § 9.13: Evaluation of corrosion grade, surface corrosion
Daimler DBL 7382 § 9.14 - Evaluation of corrosion grade, edge corrosion Supply specification - Coating of metallic parts in vehicle interiors: § 9.14: Evaluation of corrosion grade, edge corrosion
Daimler DBL 7382 § 9.16 - Subsurface corrosion around a scribe Supply specification - Coating of metallic parts in vehicle interiors: § 9.16: Subsurface corrosion around a scribe
Daimler DBL 7382 § 9.7 - Scratch test with knife Supply specification - Coating of metallic parts in vehicle interiors; § 9.7: Scratch test with knife
Daimler DBL 7392 § 5.2 - Scratching with knife Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.2: Scratching with a knife
Daimler DBL 7392 § 5.4 - Subsurface corrosion around a scribe Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.4 - Corrosion creep around a scribe
Daimler DBL 7392 § 5.5 - Evaluation of degree of rusting, surface corrosion Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.5 - Evaluation of degree of rusting, surface corrosion
Daimler DBL 7392 § 5.7 - Evaluation of degree of rusting, edge corrosion Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.7 - Evaluation of degree of rusting, edge corrosion
Daimler DBL 7399 § 5.1 - Scratching with knife Supply specification - Enamels, paints and similar coating materials and associated coatings; § 5.1: Scratching with knife
Daimler DBL 7399 § 6.1 - Visual comparision of gloss according to standard samples Supply specification - Enamels, paints and similar coating materials and associated coatings; § 6.1: Visual comparision of gloss according to standard samples
Daimler DBL 9202 (Draft) § 7.14 - Resistance to care products Supply Specification - Decorative parts in vehicle interiors; § 7.14: Resistance to care products
Daimler DBL 9202 (Draft) § 7.15 - Resistance to cosmetics Supply Specification - Decorative parts in vehicle interiors; § 7.15: Resistance to cosmetics
Daimler DBL 9202 (Draft) § 7.19 - Resistance to stress cracking on the component Supply Specification - Decorative parts in vehicle interiors; § 7.19: Resistance to stress cracking on the component
Daimler DBL 9202 § 3.5 - Adhesion test (adhesive tape method) Supply Specification - Decorative parts in vehicle interiors; § 3.5: Adhesion test (adhesive tape method)
Daimler DBL 9202 § 4.1.1 - High-temperature storage Supply Specification - Decorative parts in vehicle interiors; § 4.1.1: High- temperature storage
Daimler DBL 9202 § 4.1.2 - Temperature cycling Supply Specification - Decorative parts in vehicle interiors; § 4.1.2: Temperature cycling
Daimler DBL 9202 § 4.1.3 - Climatic storage Supply Specification - Decorative parts in vehicle interiors; § 4.1.3: Climatic storage
Daimler DBL 9202 § 4.1.9 - Resistance tests Supply Specification - Decorative parts in vehicle interiors; § 4.1.9: Resistance tests (Resistance to cleaning/care products)
Daimler FuVo A 001 006 00 99: Function Specification Instrument Panel Assembly Instrument Panel Assembly
Daimler FuVo A 170 680 01 00: Function Specification Instrument Panel Assembly Instrument Panel Assembly
Daimler FuVo A 210 720 00 00: Function Specification Door Panel Assembly Door Panel Assembly
Daimler FuVo A 210 720 00 00: Function Specification Door Panel Assembly Door Panel Assembly
Daimler MBN 10494-5 § 5.1 - Manual scratch test (with a knife) Paint test methods - Part 5: Technical-mechanical tests
Daimler MBN 10494-5 § 5.8.2 - Wiping scratch resistance: crockmeter test Testing the scratch resistance of coatings with the crockmeter
Daimler MS-JP-9-4(S) - Flammability in condition as delivered

Flammability testing of interior materials

Daimler PA PP PWT 3640 (without sample preparation) - Tensile shear strength Determination of the tensile shear strength of single-shear overlapped bonding (tensile shear test in accordance with DIN EN 1465)
Daimler PA PP PWT 3668 - Static shearing force Determination of the static shearing force of bonded components
Daimler PA PP PWT 7328 - Resistance against sunscreen Resistance of interior materials against sunscreen
Daimler PAPP PWT 7301 - Abrasion test with a steel heel Abrasion test with a steel heel
Daimler PAPP PWT 7329 - Colour change in defined amine atmosphere Colour change of automotive interior material in defined amine atmosphere
Daimler PB VWL 301 - Abrasion test with metal heels Abrasion test with metal heels
Daimler PB VWL 323 - Determination of the abrasion resistance of the pile Determination of the abrasion resistance of the pile - Test instruction
Daimler PB VWT 217 - Corrosion test Corrosion testing of vehicle interior trim - Test instruction
Daimler PBODC390 - Scratch resistance of coatings with Crockmeter Determination of the scratch resistance of coatings with Crockmeter
Daimler PV EP/AIS (Abrasion test) - Ingress/Egress endurance test Test standard seats - Endurance tests - heated seats - § 5.17.1 and § 5.17.2: Abrasion test, side and middle arm-rest
Daimler PV EP/AIS (Pulsator test) - Ingress/Egress endurance test Test standard seats - Endurance tests - heated seats - § 5.17.3 and § 5.17.4: Pulsator test, middle seat and exit side seat cushion
Daimler PV EP/AIS (Rotary Load Change) - Ingress/Egress endurance test Test standard seats - Endurance tests - heated seats - § 5.17.5: Rotary Load Change
Daimler PV EP/AIS (TV1 with taxi load) - Ingress/Egress endurance test Test standard seats - Endurance tests - Complete seats; § 5.7.12a: Ingress/egress simulation with robots (TV1 with taxi load)
Daimler PV EP/AIS § 5.7.12a (TV2 without taxi load) - Ingress/Egress endurance test Test standard seats - Endurance tests - Complete seats; § 5.7.12b: Ingress/egress simulation with robots (TV2 without taxi load)
Daimler PV EP/AIS § 7.4.1 - Sun simulation (long term test) Test standard seats - environmental situation; § 7.4.1: Sun simulation
Daimler QEV 111AFFHJ6: Technical Component Requirement Specifications - Rear Shelf Paneling ZB Rear Shelf Paneling
Daimler Specification: Soiling / Cleaning on Interior Parts/ Interior Materials
Daimler Test Instructions EP / AIS: Test Instructions Seats
DaimlerChrysler LP-463DB-12-01 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging Resistance of Interior Materials
Damage analysis Damage analysis
DBL 5307 § 5.1: Supply Specification Flame retardant properties - § 5.1: Test for determination of the horizontal burning rate of materials All interior trim materials of passenger cars, multipurpose passenger cars, commercial vehicles and buses. For buses with more than 22 seats; additionally seat accessories, linings of side and rear panels, materials with a thermal and/or acoustic function, floor linings, luggage racks, heating and ventilation hoses, trim panels, lighting.
DBL 5310 § 7.11 - Color stability Leather for interior - Color stability
DBL 5310: Supply Specification - Leather for interior equipment For leather in the interior equipment area.
DBL 5311 - Supply Specification Leather Leather, e.g. for key fobs, vehicle document wallets
DBL 5327: Supply Specification for Textiles, Flat Fabrics, Weaving Processes For woven upholstery fabrics and flat fabrics for use in vehicle interiors.
DBL 5330 - Supply Specification - Woven artificial leather cloth Woven artificial leather cloth, e.g. Ski bag
DBL 5333 - Supply Specification - Films and sheets as wear protection on Euro velours, for all model series
DBL 5348 - Supply Specification Foamed and Compact Artificial Leather Foamed and Compact Artificial Leather
DBL 5348: Supply Specification - Foamed and Compact Artificial Leather For foamed and compact artificial leather.
DBL 5348: Supply Specification - Foamed and Compact Artificial Leather for foamed and compact artificial leather
DBL 5381: Delivery Specifications spray and powder skins
DBL 5381: Supply specification Molded skins (spray and powder-cast skins) made of TPU, Polyolefine and PVC
DBL 5400: Supply specification - Components made from glass-fibre reinforced thermosets For parts manufactured from glass-reinforced thermosetting plastics such as sound encapsulation, paneling, SMC parts.
DBL 5401:Delivery Instructions - parts from duroplastic materials in the engine and aggregate area duroplastic materials
DBL 5403: Funktional Parts made of thermoplastic materials for engine and subassembly-related applications For thermoplastics for use in engine components.
DBL 5404: Parts of thermoplastic materials for the direct and indirect area of the passenger compartment, passenger compartment heating, cabin ventilation, cladding and housing For parts made from thermoplastics of the direct and indirect area of the vehicle interior, the air intake and heating.
DBL 5404: Teile aus thermoplastischen Kunststoffen für den direkten und indirekten Bereich des Fahrgastinnenraumes, für Fahrgastraumheizung, Fahrgastraumbelüftung, Verkleidungen und Gehäuse
DBL 5406: Supply Specification - Parts manufactured from thermoplastics in the coolant circuit e.g. Radiator tank, pump housing
DBL 5408: Thermoplastic parts for engine air management For thermoplastics for use in engine air management.
DBL 5408: Thermoplastic parts for engine air management e.g. Raw air line, air intake
DBL 5408: Thermoplastic parts for engine air management
DBL 5408: Thermoplastic Parts for Engine Air Management For thermoplastics for use in engine air management.
DBL 5410: Supply Specification - Thermoplastic parts for control elements, bearing elements, fasteners, and spacers Thermoplastic parts for control elements, bearing elements, fasteners, and spacers
DBL 5412: Supply-Specification - Plastic moldings manufactured from plasticized PVC Plastic moldings manufactured from plasticized PVC
DBL 5413: Supply Specification, Plastic sections manufactured from plasticized PVC and ABS-PVC e.g. Profile cords, cover strips, binding sections
DBL 5416 (Requirements for the coating): Supply Specification - Parts Manufactured from Thermoplastics Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5416 (Requirements for the coating): Supply Specification - Parts Manufactured from Thermoplastics Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5416 (Requirements for the coating): Supply Specification - Parts Manufactured from Thermoplastics Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5416 (Requirements on the material): Supply Specification - Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5417: Supply Specification, Molded Parts Manufactured from Long-Fiber-Reinforced Thermoplastics, Hot Pressed For all long-fiber-reinforced thermoplastics processed by compression molding and impact extrusion (flow molding). (Attention: This DBL 5417 shall not apply to identical materials processed by injection molding. DBL 5418 shall be applied for these.)
DBL 5418: Supply Specification - Injection Molded Parts Manufactured from Fiber Reinforced Thermoplastics for Structural Requirements For components manufactured from fiber reinforced thermoplastics with increased mechanical strength and rigidity requirements in order to fully exploit the lightweight design potential.
DBL 5420: Delivery Instructions - plastic insulating parts for electric low voltage range e.g. Insulator for lamp base, bobbin
DBL 5430: Emissions and odor in the interior For materials and components that can come into contact with the vehicle interior air directly or indirectly.
DBL 5450: Supply Specifications- Foamed Flexible Polyurethane-Based Cellular Plastics Foamed Flexible Polyurethane-Based Cellular Plastics
DBL 5452: Supply Specification - Foam-molded flexible cellular polyurethane-based materials Flexible, predominantly open-cell polyurethane foams on polyether basis produced as moldings / Molded padded parts e.g. seat backrests etc.
DBL 5454 - Supply Specification Covered Foam Upholstery top layers
DBL 5455: Supply Specification - Polyolefin foam Polyolefin foam eg. for antisqueak, shielding and sealing material.
DBL 5456: Supply Specification - Composite foam blocks for interior applications Composite foam blocks made from PUR foam flakes in block molds with binding agent. E.g. as damping material for passenger cars, commercial vehicles and buses as insert or reinforcement in seats; as insulation A-pillar, B-pillar
DBL 5460 - Supply Specification - Parts manufactured from energy-absorbing foams for interiors energy-absorbing foams
DBL 5460 - Supply Specification - Parts manufactured from energy-absorbing foams for interiors energy-absorbing foams
DBL 5462: Supply Specification - Molded Rigid and Semi-Rigid Foams For molded rigid and semi-rigid foams. eg. Center field side airbag, instrument panel foam backing
DBL 5463: Light multi-layer sound insulations for internal and external applications Light multi-layer sound insulations for internal and external applications. As acoustic parts for internal and external vehicle compartments.
DBL 5468: Supply Specification - Composite foam blocks for interior applications Composite foam blocks made from high-grade PUR foam flakes produced in molding tools with binding agent
DBL 5468: Supply Specification-Polyurethane integral structural foam for interior design parts Polyurethane integral structural foam for interior design parts
DBL 5471: Verkleidungs- und Formpolsterteile für Fahrzeuginnenräume (Verbundteile) Verkleidungs- und Formpolsterteile für Fahrzeuginnenräume (Verbundteile)
DBL 5472: Supply Specification, Substrate material in sandwich design Substrate material in sandwich design, e.g. molded headlining, Sliding roof lining, Lining luggage compartment floor, Roof reinforcement insulation
DBL 5474: Multi-Layer Composite Film for Interior Equipment Sensor Systems For multi-layer composite film for vehicle interiors.
DBL 5474: Supply Specification - Multi-Layer Composite Film for Interior Equipment Sensor Systems For multi-layer composite film for vehicle interiors.
DBL 5474: Supply Specification, Multi-Layer Composite Film for Interior Equipment Sensor Systems Multi-Layer Composite Film for Interior Equipment Sensor Systems
DBL 5481: Extruded, thermoformable plastic sheets plastic sheets
DBL 5485 - Supply Specification - Direct-laminated linings for vehicle interiors (Back compression/In-mold decoration) Direct-laminated linings for vehicle interiors and trunks, manufactured using the Back compression/In-mold decoration
DBL 5490: Specification - Plastic parts made of recycled materials For plastic components which consist to a large extent from recycled material that has been recovered from used old parts.
DBL 5555: Finished Parts and Semi-Finished Products Made of Organic Polymer Materials / General Conditions and Test Methods technical conditions of supply for the quality assurance of materials used in finished parts and semifinished products made of organic polymer materials. These shall include plastics (thermoset plastics and thermoplastics), thermoplastic elastomers (TPE), fabric, leather, artificial leather film, and elastomers (rubber materials).
DBL 5555: Finished Parts and Semi-Finished Products Made of Organic Polymer Materials General Conditions and Test Methods Specifications governing the general technical conditions of supply between Daimler AG and its supplying partners for the quality assurance of materials used in finished parts and semifinished products made of organic polymer materials. These shall include plastics (thermoset plastics and thermoplastics), thermoplastic elastomers (TPE), fabric, leather, artificial leather film, and elastomers (rubber materials).
DBL 5556: delivery specifications, elastomer moldings with normal mechanical requirements Elastomer moldings with normal mechanical requirements without constant exposure to fuel or oil
DBL 5558 Elastomeric parts for mechanical and dynamic high and maximum load, thermally stable up to 100 ° C claimable
DBL 5558: Elastomer parts subject to high and extremely high mechanical-dynamic stress, with temperature application range up to 100 °C bearing elements wihout acoustic requirements, torsion bar bearing, torque strut bearing, sub-frame bearing, transmission bearing, suspension turret web, crankshaft vibration damper, bearing elements with hydraulic damping system, such as transverse link bearing, sub-frame beaaring
DBL 5559: Supply Specification, Parts manufactured thermoplastic polyurethane elastomers (TPU) Temperature application range up to 120 °C e.g. Cups, dust caps, sealing elements
DBL 5562: Supply Specification, Thermoplastic Elastomers (TPE) Thermoplastic Elastomers (TPE)
DBL 5562: Thermoplastic Elastomers (TPE) Thermoplastic elastomers
DBL 5568: Supply Specification Elastomer parts heat-tolerant to 150 to 250 ° C, moderately resistant to petroleum-based products seals, regulators in tank ventilating valves, charge-air hose
DBL 5571: Delivery Instructions, rubber profiles / moldings made of elastomers, mainly in the car body area - thermally claimable from 70 ° C (endurable) to 100 ° C for (short-term)
DBL 5571:Supply Specification, Sealing Sections / Molded Parts Manufactured from Elastomers, Mainly in Body Area Sutiable for Continuous Thermal Loads of 70°C to Short-Term Thermal Loads of 100°C e.g. Fixed seals such as shims, gaskets, cup seals
DBL 5572: Single and multilayer floor mats Single and multi layer floor mats in passenger compartments
DBL 5573: Supply Specification, Moldings and extrusions manufactured from sponge rubber (foamed elastomers with open an closed cell structure) e.g. fixed sponge rubber parts, seals in vehicle interior
DBL 5574: Supply Specification, Moldings and hoses manufactured from cellular rubber (pored elastomers with closed cells) Only for parts with restricted sealing effect and/or insulating properties (up to 85°C), for the interior and exterior body area
DBL 5575: Supply Specification, fibre flocculated elastomere parts for body sealing AA 10 / 20 / 21 / 40: fibre flocculated elastomere parts (e. g. window guide rails, dust shield seals) AA22: fibre flocculated plastic parts (z. Bsp. stowage compartment, armrest, glove compartment)
DBL 5578, Tab. 2, 4.12.4 / LV 28 (Florida-Modus) - Resistance to weathering (humidity-warm climate, e.g. Florida) Supply specification - Elastomer parts with anti-friction coating; Table 2, 4.12.4: Artificial weathering - Exterior application - Florida-Modus
DBL 5578, Tab. 2, 4.12.4 / LV 28 (Kalahari-Modus) - Resistance to weathering, dry-hot climate, e.g. Kalahari, Arizona, South America Supply specification - Elastomer parts with anti-friction coating; Table 2, 4.12.4: Artificial weathering - Exterior application - Kalahari-Modus
DBL 5578: Supply Specification - Elastomer parts with anti-friction coating Elastomer parts with anti-friction coating
DBL 5578: Supply Specification - Elastomer parts with anti-friction coating For elastomer parts with anti-friction coatings, e.g. static seal, lower door edge seal, door seal, channel seal, convertible seals.
DBL 5610: Supply Specification - Safety windows for vehicle glazing Product versions 00 to 23: Windshields (WS) / Product versions 30 to 97: Rear (RW), side and roof windows
DBL 5620: Organic glass for lighting equipment
DBL 5765: Supply Specification - Wood fibre hardboards For reinforcements for interior trim parts, e.g. reinforcement door centre panel, load compartment cover, reinforcement sliding roof.
DBL 5768: Compression molded fibrous materials
DBL 5800: Supply Specfication - Folding Top Fabric Folding top for convertibles and sports cars
DBL 5805 - Supply Specification, Reverse Side Laminating Material Reverse Side Laminating Material for leather
DBL 5809 - Delivery Instructions crocheted crocheted, hard
DBL 5809 - Supply Specification - knits knits
DBL 5809 - Supply Specification knitted Fabrics knitted Fabrics
DBL 5809: Supply Specification - Knitted Fabrics For knitted fabrics e.g. for paneling, seat covers, inner headliners, draft stops.
DBL 5809: Supply Specification - Knitted fabrics e.g. knits for cladding parts, seat covers, headliner, windbreak.
DBL 5816: Supply Specification - Microfiber Nonwoven For microfiber nonwovens
DBL 5816: Supply Specification - Microfiber Nonwoven and Microfiber Fabric For microfiber nonwovens and microfiber fabrics.
DBL 5818 - Supply specification - Knitted fabrics
DBL 5818 - Supply specification - Knitted fabrics
DBL 5853 - Supply Specification - Velour carpet shaped carpet
DBL 5853: Supply Specification - Velour carpet Velour carpet
DBL 5867: Supply Specification - Technical Fabrics Technical fabric: polyamide
DBL 5867: Supply Specification Technical fabrics Technical fabrics
DBL 5868 A: Supply Specification - Needlefelt fabrics Flat needle-punched nonwoven, molded
DBL 5868 A: Supply Specification - Needlefelt fabrics Flat needle fleece
DBL 5868: Supply Specification - Needlefelt Fabrics Needlefelt Fabrics
DBL 5868: Supply Specification - Needlefelt Fabrics Needlefelt Fabrics
DBL 5869 - Supply Specification, Nonwoven fleece Fleece
DBL 5881 - Delivery Instructions synthetic fiber polyester fabric Upholstered fabric seat center section
DBL 5882 - Supply Specification - Woven upholstery fabric Upholstery fabric
DBL 5883: Supply Specification - Synthetic Upholstery Fabric For synthetic upholstery fabrics for, for instance, door linings, door center panels, seat covers, headrests.
DBL 5884 - Supply Specification - Bolster material Seat cover BR W212
DBL 5913: Supply Specification - Straps and belts Straps and belts
DBL 5934 - Supply specification - Rubber bands, cords and fabrics Rubber bands
DBL 5934 - Supply specification - Rubber bands, cords and fabrics Rubber bands
DBL 5937 - Supply Specification - Tubular tricot tape Stitch tape on covers
DBL 5939 - Suppla Specification Tapes e.g. head restraint slot binding
DBL 5943 - Supply Specification - Fully synthetictwisted yarn sewing Thread
DBL 5955 - Supply Specification Padding Upholstery wadding
DBL 5972:Single-Layer Acoustic Insulating Materials insulating materials, plastic films
DBL 6260: Supply Specification, hoses and lines for power steering and suspension systems High-pressure (HD), return and suction hose for power steering, automatic level control and Suspension Systems
DBL 6260: Supply Specification, hoses and lines for power steering and suspension systems High-pressure (HD), return and suction hose for power steering, automatic level control and Suspension Systems
DBL 6269: Supply Specification, Hoses for windshield washer systems and headlight washer / wiper systems Hoses for windshield washer systems and headlight washer / wiper systems
DBL 7381: Supply Specification - Coating for major passenger car components/body panels and other functional parts with high corrosive stress Finish coat (top coat) for components subject to high corrosive stress, and - if applicable - also mechanical stress. This DBL applies to coatings on the outer side and underside of vehicles and in the engine compartment, not for vehicle interiors.
DBL 7382: Supply Specification - Coating of Metallic Parts in Vehicle Interiors For all metallic base materials in vehicle interiors which have been provided with an organic coating. Testing of the surface protection properties of the coating with regard to corrosion, mechanical properties and weather resistance.
DBL 7384: Supply Specification - Coating of plastic parts in vehicle interiors For coated plastic parts used in the interior of vehicles.
DBL 7391: Supply Specification - Coating / Painting for Parts with High Corrosive Stress For coatings on the outer side and underside of vehicles and in the engine compartment. Finish coat (top coat) for components subject to high corrosive stress, and - if applicable - also mechanical stress.
DBL 7392: Coating/Painting for Parts (moderate corrosion resistance) Finish paint (topcoat) for components that are exposed to hot and humid atmosphere. For mainly for components in the interior of vehicles.
DBL 7402: Decorative coating of plastic parts by plasma or vacuum deposition Components made of plastic and equipped with a decorative coating, the significantly coloring layer of it is produced by a method of plasma or vacuum deposition
DBL 7904: Supply Specification - Adhesive applications on components for assembly requirements For adhesive bonds on components
DBL 7906: Supply Specification - Self-adhesive components e.g. GPS-antennae, emblems, spoilers
DBL 8230: Supply Specification - Self-adhesive Labels For labels on tire pressure, trunk loading, characteristic data for engines and components, and others.
DBL 8451: Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materials for components manufactured from ferrous materials
DBL 8451: Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materials components manufactured from ferrous materials
DBL 8465: Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings For functional parts and ornamental fittings in the interior or exterior of the vehicle.
DBL 8465: Electroplated Parts manufactured from Plastics with metallic Coatings e.g. Functional parts or ornamental fittings, Hub caps
DBL 9201: aluminum parts with anodic surfaces decorative interior and exterior parts of motor vehicles
DBL 9202: Supply Specification - Decorative parts in vehicle interiors Decorative parts in vehicle interiors
DBL 9202: Supply Specification - Decorative parts in vehicle interiors Decorative parts in vehicle interiors
DBL 9202: Supply Specification Decorative parts in vehicle interiors Decorative parts in vehicle interiors
DBL 9440: Fasteners with Metric Thread - Surface Protection and Supplementary TL / VDA 235-104: Cr(VI)-free surface of protection for Fasteners with Metric Thread. e.g. Fasteners with Metric Thread (internal and external)
DBL 9441: Supply Specification - Surface protection for fasteners for direct screw connection in metal sheets ans plastic (non-metric threads) e.g. fasteners for direct screw connection in metal sheets ans plastic (non-metric threads)
Decomposition by melting Decomposition by melting, various
Decorative Parts in Vehicle Interiors Decorative Parts in Vehicle Interiors
Density (immersion method) General method to determine the density (immersion method)
Determination of apparent density Determination of apparent density
Determination of density (volume test equipment) Determination of density (volume test equipment)
Determination of extractable components Determination of extractable components
Determination of hairiness Determination of hairiness
Determination of operating forces Determination of operating forces
Determination of particle size distribution Determination of particle size distribution
Determination of static and permanent elongation Determination of static and permanent elongation
Determination of stiffness General method for the determination of the stiffness
Determination of surface emissions using a flame ionization Determination of surface emissions using a flame ionization
Determination of the pile height Textile - Determination of the pile height (manually - measurement with a steel ruler)
Differential scanning calorimetry (DSC) / DIN EN ISO 11357 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
Dimensional analysis, wet chemistry (volumetry) Dimensional analysis, wet chemistry (volumetry)
Dimensional stability at applying temperature load Dimensional stability at applying temperature load; Deformation, max; Deformation, permanent
Dimensional stability at pressure load Dimensional stability at pressure load; deformation, max; deformation, permanent
Dimensional stability at tensile load Dimensional stability at tensile load; deformation, max; deformation,permanent
DIN 18121-1 - Oven drying (105 °C) Soil, investigation and testing - Water content - Part 1: Determination by drying in oven
DIN 18121-2-LS-63 - Rapid drying (microwave oven) Soil, Investigation and testing; Watercontent - Part 2: Determination by rapid methods; Microwave oven
DIN 18122-1 - Consistency limits Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
DIN 18123 - Determination of grain-size distribution Soil, Investigation and testing - Determination of grain-size distribution
DIN 18124 - Determination of density of solid particles Soil, investigation and testing - Determination of density of solid particles - Capillary pycnometer, wide mouth pycnometer
DIN 18125 - Determination of density of soil Soil, investigation and testing - Determination of density of soil, Part 1: Laboratory tests, Part 2: Field tests
DIN 18126 - Density for maximum and minimum compactness Soil, investigation and testing - Determination of density of non-cohesive soils for maximum and minimum compactness
DIN 18127 - Proctor test Soil, Investigation and testing - Proctor-test
DIN 18128 - Determination of ignition loss Soil, Investigation and testing - Determination of ignition loss
DIN 18129 - Determination of lime content Soil, investigation and testing - Determination of lime content
DIN 18130-1 - Coefficient of water permeability Soil, investigation and testing - Determination of the coefficient of water permeability - Part 1: Laboratory tests
DIN 18132 - Determination of water absorption Soil, testing procedures and testing equipment - Determination of water absorption
DIN 18136 - Unconfined compression test Soil, Investigation and testing - Unconfined compression test
DIN 19528 - Leaching of solid materials (percolation method)) Leaching of solid materials - Percolation method for the joint examination of inorganic and organic substances (quick colomn test)
DIN 30646: Self-adhesive signs - Technical delivery conditions for signs made of plastic film, aluminium foil and paper For all kinds of signs with adhesive coating, which are protected by a suitable paper or a suitable film.
DIN 3415-1&2 - Textile touch and close fasterners Textile touch and close fasterners; requirements and test methods
DIN 3419-1 - Determination of various strengths on slide fasteners Slide fasteners - Part 1: Technical delivery conditions
DIN 3761-14 - Pyrolysis-IR Rotary shaft lip type seals for automobils - Test - Infrared-spectroscopic analysis of elastomers
DIN 38407-F14, based on - Determination of phenoxy-alkane carboxylic acids German standard methods for the examination of water, waste water, and sludge - Jointly determinable substances ( group F ) part 14: Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrome-tric detection after solid - liquid extraction and derivatization ( F 14 )
DIN 38409 - H27 general measures of effects and substances ( group H ); determination of total bound nitrogen TN ( H27)
DIN 40050-9 - Degree of protection (IP-code) of electrical equipment Road vehicles - degrees of protection (IP code) - protection against foreign objects, water and contact, electrical equipment
DIN 50017-KFW - Condensation-water climate with alternating humidity and air temperature Climates and their technical application, condensated water containing climates with alternating humidity and temperature
DIN 50017-KK - Condensation-water atmosphere with constant humidity Climates and their technical application, condensated water containing climates (constant climate)
DIN 50017-KTW - Condensation-water climate with alternating air temperature Climates and their technical application, condensated water containing climates with alternating temperatures
DIN 50018 - Testing in a saturated atmosphere in the presence of sulfur dioxide Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN 50021-CASS - Copper chloride / acetic acid salt spray fog test Spray tests with different sodium chloride solutions (CASS: copper chloride / acetic acid salt spray fog test)
DIN 50021-SS - Salt spray fog test Spray tests with different sodium chloride solutions (SS: Salt spray fog test)
DIN 50958 - Modified Corrodkote corrosion test (mod. Corr-Test) Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)
DIN 51007 - Differential Thermal Analysis (DTA) Thermal Analysis - Differential Thermal Analysis - Principles
DIN 51084-C (based on) - Determination of fluoride content Testing of oxidic raw materials for ceramic, glass an glazes - Determination of fluoride content (Procedure C)
DIN 51558-2 Testing of mineral oils; determination of neutralization number; Color-indicator titration - insulatuing oils
DIN 51718 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51721 Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method
DIN 51722-1 Testing of solid fuels - Determination of nitrogen content - semi-micro Kjeldahl method
DIN 51724-1 Testing of solid fuels - Determination of sulfur content - Part 1: Total sulfur
DIN 51732 - Determination of total carbon, hydrogen and nitrogen Draft version: Testing of solid mineral fuels - determination of total carbon, hydrogen and nitrogen - instrumental methods
DIN 51732-N Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen (here nitrogen) - Instrumental methods
DIN 51757, procedure 2 (hydrostatic weighing) - Density Testing of mineral oils and related materials; determination of density
DIN 51855-4 Testing of gaseous fuels and other gases - Determination of sulfur sompounds content - Part 4: Content of hydrogen sulfide, zinc acetate method
DIN 51872-04-A Testing of gaseous fuels and other gases; Determination of the components; Gas chromatographic procedure
DIN 52182 - Determination of apparent density Testing of wood - Determination of density
DIN 52350 - Determination of thickness, basis weight and density Testing of wood fiber boards - sampling, thickness measurement, determination of the basis weight and density
DIN 52351 § 1. - Determination of the humidity Testing of woodfiber plates - Determination of the humidity, water absorption and thickness swelling, § 1.: Determination of the humidity
DIN 52351 § 2. - Determination water absorption and thickness swelling Testing of woodfiber plates - Determination of the humidity, water absorption and thickness swelling, § 2.: Determination water absorption and thickness swelling
DIN 52616 (based on) - Determination of thermal conductivity Testing of thermal insulation materials - Determination of thermal conductivity by means of a heat-flow meter
DIN 53019-1 - Viscosities (with rotations viscosimeter) Viscometry - Measurement of viscosities and flow curves by mean of rotational viscometers - Part 1: Principles and measuring geometry
DIN 53100 § 7.5 (appendix D) - Temperature cycling test Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials; § 7.5: Thermal cycle test (appendix D)
DIN 53100, Appendix F - Glacial acetic acid test Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastic materials - Appendix F: Glacial acetic acid test
DIN 53109 - Abrasion by the abrasion wheel method Testing of paper and board, Determination of abrasion by the abrasion wheel method
DIN 53119-2 - Determination of friction Testing of paper - Determination of friction - Part 2: Inclined plane method
DIN 53121 - Bending stiffness by the beam method Testing of paper and board - Determination of the bending stiffness by the beam method
DIN 53122-1 - Determination of water vapour transmission Testing of plastic and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method
DIN 53142-1 - Puncture test Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53230 - Scheme for the evaluation of tests Testing of paints, varnishes and similar coating materials - Scheme for the evaluation of tests
DIN 53292 - Tension test in flatwise plane Testing of sandwiches; tension test in flatwise plane
DIN 53323 - Vaulting and bursting test Testing of leather - determination of the stress-strain behaviour during vaulting and bursting test
DIN 53331 - Stitch tear resistance Testing of leather: Determination of the stitch tear resistance
DIN 53333 - Determination of the water vapour permeability Testing of leather, artificial leather and textiles; determination of the water vapour permeability
DIN 53350 - Stiffness in bending (method according to Ohlsen) Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending; method according to Ohlsen
DIN 53351 - Permanent folding (Flexometer-method) Testing of artificial leather and similar shut materials - Behaviour at permanent folding (Fexometer-method)
DIN 53354 - Tensile test Testing of artificial leather - Tensile test
DIN 53356 - Tear growth test Testing of artificial leather and similar sheet materials - Tear growth test
DIN 53357-A - Adhesion test (method A) Testing of plastic sheets - Adhesion test (method A)
DIN 53359 - Flex cracking test Testing of artificial leather and similar sheet materials - Flex cracking test
DIN 53360 - Determination of the static and permanent elongation Testing of artificial leather and similar sheet materials - Determination of the total elongation (statical elongation) and irreversible elongation
DIN 53362 - Stiffness in bending (Method according to Cantilever) Testing of plastic films and textile fabrics (excluding nonwovens), coated or not coated with plastics - Determination of stiffness in bending - Method according to Cantilever
DIN 53363 - Tear test using trapezoidal test specimen with incision Testing of plastics films - Tear test using trapezoidal test specimen with incision
DIN 53370 - Method F - Thickness Testing of plastic films - Determination of thickness by mechanical scanning
DIN 53370 - Proceedure P - Thickness Testing of plastic films - Determination of thickness by mechanical scanning
DIN 53373 - Impact penetration Testing of plastics - impact penetration test combined with data recording by means of electronic devices
DIN 53377 - Determination of dimensional stability Testing of plastic films - Determination of dimensional stability
DIN 53377 - Determination of Dimensional stability Testing of plastic films - Determination of dimensional stability
DIN 53424 - Determination of dimensional stability under heat Testing of rigid cellular plastics - determination of dimensional stability under heat in the case of flexural load and compression load
DIN 53428 - Behaviour when exposed to fluids, vapours and solids Testing of cellular materials - Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
DIN 53430 - Tensile test Testing of rigid cellular plastics - tensile test
DIN 53435-DB-G (Dynstat flexural test) - Determination of flexural properties with dynstat test specimens Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Flexural properties with dynstat test specimens
DIN 53435-DS-G (Dynstat impact flex. test, unnotched, -25°C) - Determination of impact resistance at dynstat test specimens at -25 °C, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (-25°C)
DIN 53435-DS-G (Dynstat impact flex. test, unnotched, -30°C) - Determination of impact resistance at dynstat test specimens at -30 °C, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (-30°C)
DIN 53435-DS-G (Dynstat impact flexural test, unnotched) - Determination of impact resistance at dynstat test specimens, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (RT)
DIN 53435-DS-K (Dynstat impact flex. test, notched, -25°C) - Determination of impact resistance at dynstat test specimens at -25 °C, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (-25°C)
DIN 53435-DS-K (Dynstat impact flex. test, notched, -30°C) - Determination of impact resistance at dynstat test specimens at -30 °C, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (-30°C)
DIN 53435-DS-K (Dynstat impact flexural test, notched) - Determination of impact resistance at dynstat test specimens, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (RT)
DIN 53438-2 - Edge ignition Testing of combustible materials - reaction against a flame of a burner - Edgeing flame action
DIN 53438-3 - Surface ignition Testing of combustible materials - reaction against a flame of a burner - Surface flame action
DIN 53453 (impact resistance) - Impact resistance Testing of plastics - Determination of impact resistance
DIN 53453 (notched impact resistance) - Impact resistance Testing of plastics - Determination of impact resistance
DIN 53477 - Determination of particle size distribution of moulding materials by dry sieving analysis Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN 53497-A - Heat storage test with constant storage period Testing of plastics - Heat storage test of moulded articles made of thermoplastic moulding materials without outside mechanical stress; Method A: constant storage period
DIN 53497-B - Heat storage test at constant temperature Testing of plastics - Heat storage test of moulded articles made of thermoplastic moulding materials without outside mechanical stress; Method B: constant temperature
DIN 53504 - Tensile properties Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53505-A / VDA 675102 - Determination of Shore A hardness Testing of rubber, elastomers and plastics - Shore hardness testing A and D; Shore A
DIN 53505-D - Determination of Shore D hardness Testing of rubber - Shore A and Shore D hardness test; Shore D
DIN 53506 - Needle tear resistance Testing of rubber, Determination of needle tear resistance
DIN 53508 - Accelerated ageing Testing of rubber - Accelerated ageing
DIN 53509-1-A - Resistance to ozone cracking Testing of rubber - Determination of resistance to ozone cracking - Part 1: static conditions; Method A (Assessment of cracking after exposure for a specified period at a given strain)
DIN 53509-1-B - Resistance to ozone cracking Testing of rubber - Determination of resistance to ozone cracking - Part 1: Static conditions; Method B (Determination of the length of time required for the first cracks to develop at a fiven strain)
DIN 53512 / VDA 675219 - Determination of rebound resilience Testing of Rubber - Determination of rebound resilience (Schob pendulum)
DIN 53516 / VDA 675235 - Abrasion Testing of rubber and elastomers - determination of abrasion
DIN 53528 - Abrasion test with the Frank Hauser apparatus Testing of rubber-coated textiles - abrasion test - determination of loss in mass by the Frank Hauser apparatus
DIN 53530 - Separation test Testing of organic materials - Test for separating layers of laminated woven fabrics; JUST sheets
DIN 53572 - Compression set Testing of soft-elastic foams - Determination of compression set after constant deformation
DIN 53579 (indentation distance) - Hardness (Indentation distance at defined indentation force) Testing of flexible cellular material - Indentation test on finished parts (Indentation distance at defined indentation force)
DIN 53579 (indentation force) - Hardness test (indentation force at defined indentation distance) Testing of flexible cellular material - Indentation test on finished parts (indentation force at defined indentation distance)
DIN 53579-1 (at default indentation distance) - Hardness (at default indentation distance) Testing of flexible cellular material - hardness test on finished parts - indentation test on shaped parts (Indentation force at default indentation distance)
DIN 53579-1 (at default indentation force) - Hardness (at default indentation force) Testing of flexible cellular material - hardness test on finished parts - indentation test on shaped parts (Indentation distancee at default indentation force)
DIN 53715 - Water content by titration according to Karl Fischer Testing of plastics - determination of water content by titration according to Karl Fischer
DIN 53728-3 - Determination of viscosity number Testing of plastics - determination of viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution
DIN 53752 - Determination of the coefficient of linear thermal expansion Testing of plastics - Determination of the coefficient of linear thermal expansion
DIN 53754 - Abrasion with the abrasion disk method Testing of Plastics - Determination of abrasion - abrasive disk method
DIN 53765-B (DSC) - Determination of melting behaviour Testing of plastics and elastomeres - Thermal analysis - DSC-method; Method B: determination of the melting behavior
DIN 53800-1 - Determination of dry mass by desiccation in hot air Textiles - Determination of commercial mass - Part 1: Determination of dry mass by desiccation in hot air
DIN 53800-2 - Determination of commercial mass and commercial linear density Textiles - Determination of commercial mass - Part 2: Determination of commercial mass and commercial linear density
DIN 53808-1 - Determination of length of fibres Testing of textiles - Determination of length of fibres by measuring of individual fibres
DIN 53811 - Determination of the diameter of fibres Testing of textiles - determination of the diameter of fibres from longitudinal view by microscope projection
DIN 53814 - Determination of water retention power Testing of textiles - determination of water retention power of fibres and yarn cuttings
DIN 53817-2 - Capacitive test (Uster) Testing of textiles - determination of the unevenness of slivers and yarns; capacitive test
DIN 53830-3 - Short length method Testing of textiles - determination of linear density of single and plied yarns; simple yarns and plied yarns, textured yarns; short length method
DIN 53830-4 - Short length method Testing of textiles - determination of linear density of single and plied yarns - elasto-yarns including core spun yarns from elastofibres; short length method
DIN 53835-13 - Testing of the elastic behaviour (between constant elongation limits) Testing of textiles - testing of the elastic behaviour - textile fabrics, single tensile strain between constant elongation limits
DIN 53835-14 - Testing the elastic behaviour (between two force limits) Testing of textiles - tensile test for testing the elastic behaviour - knitted fabrics, single strain between two force limits
DIN 53835-2 - Tensile test for testing the elastic behaviour (repeated tension stresses between constant elongation limits) Testing of textiles - tensile test for testing the elastic behaviour - single and plied yarns from elastofibres, repeated tension stresses between constant elongation limits
DIN 53840-1 - Determination of curling, of characteristic curling and of mechanical curling resistance Testing of textiles - determination of curling, of characteristic curling and of mechanical curling resistance of textured filament yarns up to a linear density of 400dtex
DIN 53842-1 - Knot tensile test Testing of textiles - knot tensile test for single and plied yarns
DIN 53843-1 - Loop tensile test Testing of textiles - loop tensile test, yarns
DIN 53852 - lengthwise - Determination of yarn length ratios Testing of textiles - determination of yarn length ratios in woven and knitted fabrics (longitudinal direction)
DIN 53852- crosswise - Determination of yarn length ratios Testing of textiles - determination of yarn length ratios in woven and knitted fabrics (cross direction)
DIN 53855-1 - Determination of thickness Testing of textiles - determination of the thickness of the textile fabrics (exept floor coverings) - apparent density over 0,05g/cm³
DIN 53856 - Determination of the mass portion of warp and weft Testing of textiles - Determination of the mass portion of warp and weft
DIN 53859-5-A - Trapezoid test Testing of textiles - tear growth test on textile fabrics - trapezoid test
DIN 53860-1 - Elbow-test, static strain Testing of textiles - testing of the bulging tendency of textile fabrics - elbow-test, static strain
DIN 53863-2 - Rotary abrasion test Testing of textiles - abraision test methods for textile fabrics - rotary abraision test
DIN 53866-2 - Shrinkage in water Testing of textiles - shrinkage of single and plied yarns - determination of shrinkage in water
DIN 53866-3 - Shrinkage in hot air Testing of textiles - shrinkage of single and plied yarns - determination of shrinkage in hot air
DIN 53867 - Determination of pilling (Random Tumble Pilling Tester) Testing of textile fabrics - determination of pilling with the Random-Tumble-Pilling-Tester
DIN 53890 - Determination of crease resistance (dry) Testing of textiles - determination of crease resistance of textile fabrics by measuring the angle of recovery, method of horizontal fold and erected free limb on the dry sample
DIN 53891-2 - Determination of crease resistance (wet) Testing of textiles - determination of crease resistance of textile fabrics by measuring the angle of recovery, method of vertical fold on the wet sample
DIN 53892-2 - Dimensional change Testing of textiles - determination of dimensional change of woven fabrics subjected to the repeated attack of moisture and dry air
DIN 53894-1 - Determination of dimensional change Testing of textiles - determination of dimensional change of textile fabrics obtained by ironing with a moist ironing cloth and a heated plate
DIN 53894-2 - Determination of dimensional change Testing of textiles - determination of dimensional change of textile fabrics, steaming on ironing machines
DIN 53923 - Determination of water absorption Testing of textiles - determination of water absorption of textil fabrics
DIN 53924 - Determination of the velocity of soaking water Testing of textiles - velocity of soaking water of textile fabrics (method by determining the rising height)
DIN 53931 - Resistance of textiles to mildew Testing of textiles - determination of the resistance of textiles to mildew; growth test
DIN 53934 - Determination of the sliding resistance Testing of textiles - determination of the sliding resistance of woven fabrics to displacement
DIN 54005 - Colour fastness of dyeings and prints to water (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to water (mild)
DIN 54015 - Colour fastness to washing in presence of peroxide Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in precense of peroxide
DIN 54016 - Colour fastness to washing in presence of hypochlorite Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in precense of hypochlorite
DIN 54034 - Hypochlorite (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to bleaching; hypochlorite (mild)
DIN 54040 - Colour fastness of dyeings and prints to alkaline milling (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to alkaline milling (mild)
DIN 54056-A - Colour fastness of dyeings and prints to sublimation in storage Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to sublimation in storage
DIN 54204 - Potassium hydroxide solution method Testing of textiles - quantitative analysis of binary mixtures - wool with other fibres - potassium hydroxide solution method
DIN 54205 - Sulphuric acid method Testing of textiles - quantitative analysis of binary mixtures; natural or regenerated cellulose fibres with polyester fibres - sulphuric acid method
DIN 54206 - Hypochlorite method Testing of textiles - quantitative analysis of binary mixtures - protein fibres with fibres - hypochlorite method
DIN 54208 - Formic acid/ zinc chloride method Testing of textiles - quantitative analysis of binary mixtures - Regenerated cellulose fibres with other fibres, especially cotton - formic acid/ zinc chloride method
DIN 54209 - Formic acid/ zinc chloride method Testing of textiles - quantitative analysis of binary mixtures - degummed mulberry silk with wool - formic acid/ zinc chloride method
DIN 54210 - Acetone method Testing of textiles - quantitative analysis of binary mixtures - acetate fibres with other fibres - acetone method
DIN 54211 - Dichlormethane (methylene chloride) method Testing of textiles - quantitative analysis of binary mixtures - triacetate fibres with other fibres - dichlormethane (methylene chloride) method
DIN 54215 - Xylol method Testing of textiles - quantitative analysis of binary mixtures - polypropylene fibres with other fibres; xylol method
DIN 54217 - Dimethyl formamide method Testing of textiles - quantitative analysis of binary mixtures - acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres; dimethyl formamide method
DIN 54220 - Formic acid method Testing of textiles - quantitative analysis of binary mixtures - polyamide 6 6 or polyamide 6 fibres with other fibres - formic acid method
DIN 54221 - Hydrochloric acid method Testing of textiles - quantitative analysis of binary mixtures - polyamide 6 6 or polyamide 6 fibres with other fibres - hydrochloric acid method
DIN 54231 - Detection of disperse dyestuffs Textiles - Detection of disperse dyestuffs (HPLC-DAD)
DIN 54278-1 - Determination of materials soluble in organic solvents Testing of textiles - Coatings and attendant materials - Part 1: Determination of materials soluble in organic solvents
DIN 54278-2 - Determination of condensation products splittable by means of hydrochloric acid Testing of textiles - coatings and attendant materials, determination of condensation products splittable by means of hydrochloric acid
DIN 54279 - Determination of the solubility of wool in urea/ bisulphite solution Testing of textiles - determination of the solubility of wool in urea/ bisulphite solution
DIN 54280 - Determination of acidity of wool Testing of textiles - determination of acidity of wool
DIN 54281 - Determination alkali solubility of wool Testing of textiles - determination alkali solubility of wool
DIN 54285 - Determination of sizing content Testing of textiles - determination of sizing content
DIN 54287 - Determination of alkali content of wool Testing of textiles - determination of alkali content of wool
DIN 54288 - Quantitative determination of sulfur in viscose fibres Testing of textiles - quantitative determination of sulfur in viscose fibres
DIN 54301 - Determination of stitch point tearing out resistance Testing of textiles - determination of stitch point tearing out resistance of bonded-fibre fabrics, felts, and similar fabrics
DIN 54310 - Mechanical delamination test Testing of textiles - delamination of fusible interlinings from upper fabrics; mechanical delamination test
DIN 54316 - Determination of thickness loss of textile floor coverings at static load Testing of textiles - determination of thickness loss of textile floor coverings at static load
DIN 54345-1 - Electrostatic behaviour Testing of textiles - electrostatic behaviour - determination of electrical resistance
DIN 55660-2 - Measurement of contact angle Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
DIN 55662 - Testing of resistance to pressure-water jetting Paints and varnishes - Coatings for automotive industry - Testing of resistance to pressure-water jetting
DIN 55913-2 § 2.9 - Determination of loss on ignition Pigments - Iron oxide pigments - methods for analysis; § 2.9: Determination of loss on ignition
DIN 55996-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes – Stone chip resistance test for coatings – Part 1: Multi impact test
DIN 6167 - Yellowness Description of yellowness of near-white or near-colourness materials
DIN 6174 - Colour measurement (CIELAB) Colorimetric evaluation of colour coordinates and colour differences to the approximated uniform CIELAB colour space
DIN 62050 - Presentation and pattern design Knitted fabrics - Presentation and pattern design
DIN 67530 - Gloss measurement Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
DIN 68861-1: Furniture surfaces, Part 1: Behaviour at chemical influence This standard applies to the not contained in DIN EN 12720 specifications for assessment procedures of furniture surfaces against chemical attack and for rigid surfaces of surface-treated furniture irrespective of the material used, except for surfaces made of leather and textiles.
DIN 75200 - Burning behaviour Determination of burning behaviour of interior materials in motor vehicles
DIN 75201-A - Fogging (reflectometric) Determination of the fogging characteristics of trim materials in the interior of automobiles; Method A (reflectometric)
DIN 75201-B - Fogging (gravimetric) Determination of the fogging characteristics of trim materials in the interior of automobiles; Method B (gravimetric)
DIN 75220-D - Sun simulation (long term testing) Ageing Automobile Components in Solar Simulation Units (Long term Testing)
DIN 75220-Z - Sun simulation (cycle test) ageing of Automobile Components in Solar Simulation Units (cycle Test)
DIN CEN/TS 15370-1 - NOCH NICHT ÜBERSETZT Solid biofuels - Method for the determination of ash melting behaviour - Characteristic temperatures method
DIN EN 1021-1 - Cigarette test Furniture - Assessment of the ignitiabiliy of upholstered furniture - Part 1: Ignition source smouldering cigarette
DIN EN 1021-2 - Match flame test Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent
DIN EN 1049-2 - Number of threads Textiles - woven fabrics - Construction - Methods of analysis; Part 2: Determination of number of threads per unit length
DIN EN 1097-3 - Determination of loose buld density and voids Tests for mechanical and physical properties of aggregates; Part 3: Determination of loose buld density and voids
DIN EN 1103 - Textiles - Fabrics of apparel - Detailed Procedure to determine the burning behaviour Fabrics for apparel
DIN EN 12087, Procedure 2 - Determination of water absorbtion Thermal insulating products for building applications - Determination of long term water absorption by immersion; Method 2: Total immersion
DIN EN 12127 - Determination of mass per unit area Textiles - Fabrics - Determination of mass per unit area using small samples
DIN EN 12260 (H34)/TN(b) - Determination of nitrogen Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
DIN EN 12280-1, Procedure 1 - Heat ageing (with heating cabinet) Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing, Procedure 1 (Procedure with heating cabinet)
DIN EN 12311-1 - Tensile properties Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof watterpoofing, determination of tensile properties
DIN EN 12373-4 - Dye spot test with prior acid treatment Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
DIN EN 12393 / BVL L 00.00-48 - Gas chromatographic determination of pesticide residues DIN EN 12393: Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues / BVL L 00.00-48: Examination of foods - fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues
DIN EN 12540 (Appendix E) - Disruptions in chrome coatings Corrosion protection of metals- Electrodeposited coating of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; Appendix E: Disruptions in chrome coatings
DIN EN 12720 - Surface resistance against cold liquids Furniture - Assessment of surface resistance to cold liquids
DIN EN 13130-4 - Determination of 1,3­butadiene Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
DIN EN 13130-4, based on - Determination of 1,3­butadiene Materials and articles in contact with foodstuffs - Plastics substances subjects to limitation - Part 4: Determination of 1,3-butadiene in plastics
DIN EN 13274-4 (method 3) Respiratory protective devices - Part 4: Flame tests - Method 3: One burner testing with moving test sample
DIN EN 13657-9.2 / DIN EN 13346-C (S7a) - Determination of acid-soluble elements Characterization of sludges - determination of trace elements and phosphorus - aqua regia extraction method; HC- pulping - closed microwave
DIN EN 1367-1 - Determination of resistance of freezing and thawing Tests for thermal and weathering properties of aggregates - Part 1: determination of resistance of freezing and thawing
DIN EN 14107 Fat and oil derivatives - Fatty acid methyl esters ( FAME ) Determination of phosphours content by inductively coupled plasma ( ICP ) emission spectrometry
DIN EN 14111 Fat an oil derivatives - Fatty acid methyl esters ( FAME ) - Determination of iodine value
DIN EN 14112 Fat and oil derivatives - Fatty Acid Methyl Ester ( FAME ) Determination of oxidation stability ( accelerated oxidation test )
DIN EN 14207 Water quality - Determination of epichlorohydrin
DIN EN 14288-A - Fogging characteristics (reflektometric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method A (reflektometric)
DIN EN 14288-B - Fogging characteristics (gravimetric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method B (gravimetric)
DIN EN 14621 - Methods of tests for textured or non-textured filament yarns Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DIN EN 1464 - Peel resistance Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method
DIN EN 1464 - Peel resistance Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
DIN EN 1465 - Tensile lap-shear strength Adhesives - Determination of tensile lap-shear strength of bonded assemblies
DIN EN 14704-1 - Determination of elasticity, strip test Determination of the elasticity of fabrics - Part 1: Strip tests
DIN EN 14971 - Determination of number of stitches Textiles - Knitted fabrics - Determination of number of stitches per unit lenght and unit area
DIN EN 15104-N Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 15598 - Pile loop tear out resistance Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction
DIN EN 15977 - Determination of elongation and permanent deformation Rubber or plastic coated fabrics - Mechanical properties - Determination of elongation under load and residual deformation
DIN EN 1604 - Dimensional stability Thermal insulating products for building applications - Determination of dimensional stabiliy under specified temperature and humidity conditions
DIN EN 1773 - Determination of width and length Textiles - Fabrics - Determination of width and length
DIN EN 1811 - Release of nickel Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
DIN EN 1876-1 - Bending test at low temperature Rubber- or plastics-coated fabrics - Low temperature tests - Part 1: Bending test
DIN EN 1936 - Determination of real density Natural stone test method - Determination of real density and apparent density, and of total and open porosity
DIN EN 20105-A02 / ISO 105-A02 - Grey scale for assessing change in colour Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
DIN EN 20105-A03 / ISO 105-A03 - Grey scale for assessing staining Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining
DIN EN 20811 - Hydrostatic pressure test Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test
DIN EN 22313 - Determination of the recovery from creasing Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
DIN EN 24920 / ISO 4920 - Determination of resistance to surface wetting (Spray test) Textile fabrics - Determination of resistance to surface wetting (Spray test)
DIN EN 25077 - Determination of dimensional change in washing and drying Textiles - Determination of dimensional change in washing and drying
DIN EN 28510-1 - peel test Adhesives; Peel test for a flexible-bonded-to-rigid test specimen assembly; Part 1: 90° peel
DIN EN 29073-1 (ISO 9073-1, 1989-07) - Determination of mass per unit area Textiles - test method for nonwovens - Part 1: determination of mass per unit area
DIN EN 29073-3 - Determination of tensile strength and elongation Textiles - Test method for nonwovens - Part 3: Determination of tensile strength and elongation
DIN EN 29865 / ISO 9865 - Bundesmann rain-shower test Textiles - Determination of water repellency of fabrics by the Bundesmann rain-shower test
DIN EN 310 - Flexural properties Wood-based panels - Determination of modulus of elasticity in bending and of bending strength,
DIN EN 31092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions
DIN EN 31092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
DIN EN 317 - Swelling in thickness after immersion in water Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
DIN EN 322 - Determination of moisture content Wood-based panels - Determination of moisture content
DIN EN 323 - Determination of density Wood-based panels - Determination of density
DIN EN 3665 - Filiform corrosion resistance test Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys
DIN EN 367 - Determining of the heat transmission on exposure to flame Protective clothing - Protection against heat and flames - Test method: determining of the heat transmission on exposure to flame
DIN EN 388 § 6.4 - Penetration force Protective gloves against mechanical risks; § 6.4: Penetration force
DIN EN 420 § 6.5 - Water vapour absorption Absorption of vapour - Protective gloves - General requirements for gloves; § 6.5: Test method for determination of water vapour absorption
DIN EN 430 - Determination of mass per unit area Resilient floor coverings - Determination of mass per unit area
DIN EN 438-2 § 11 - Resistance to abrasion High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; § 11: Resistance to abrasion
DIN EN 60 (625°C) - Determination of loss on ignition Glass-reinforced plastics - Determination of loss on ignition (625°C)
DIN EN 60068-2-1 / VDE 0468-2-1 - Cold storage Environmental testing - Part 2-1: Tests - Test A: Cold
DIN EN 60068-2-11 - Salt mist test Environmental testing - Part 2: Tests - Test Ka: Salt mist
DIN EN 60068-2-14 § 7 - Test Na: Rapid change of temperature with prescribed time of transfer Enviromental testing - Part 2-14: Tests - Test N: Change of temperature; § 7: Test Na: Rapid change of temperature with prescribed time of transfer
DIN EN 60068-2-2 / VDE 0468-2-2 - Heat storage Environmental testing - Part 2-2: Tests - Test B: Dry heat
DIN EN 60068-2-30 - Climate cycle test Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DIN EN 60068-2-52 / IEC 68-2-52 - saltspray test Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
DIN EN 60068-2-60 - Flowing mixed gas corrosion test Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test
DIN EN 60068-2-70 / IEC 68-2-70 - Resistance to abrasion (Abrex) Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (Abrex)
DIN EN 60068-2-78 / IEC 60068-2-78 - Damp heat, steady state Environmental testing Part 2-78: Tests - test Cab: Damp heat, steady state
DIN EN 60112 / VDE 0303-11 (IEC 60112) - Determining the comparative and the proof tracking indices Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DIN EN 60156; VDE 0370-5 - Determination of the breakdown voltage (insulatingoil) Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156: 1995);
DIN EN 60247; VDE 0380 - Measurement of relative permittivity Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
DIN EN 60695-2-11; VDE 0471-2-11 (IEC 60695-2-11) - Glow Wire Test Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability test method for end-products
DIN EN 60695-2-12; VDE 0471-2-12 (IEC 60695-2-12) - GWFI (Glow Wire Flammability Index) Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods; Glow-wire flammability test method for materials
DIN EN 60695-2-13; VDE 0471-2-13 (IEC 60695-2-13) - GWIT (Glow Wire Ignition Temperature) Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
DIN EN 62321/VDE 0042-1 (closed vessel/microwave) - Determination of the total content of selected elemants with atomic emission spectrometry (ICP-OES) Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr-VI, polybrominated biphenyls, polybrominated diphenyl ethers)
DIN EN 62321/VDE 0042-1 Annex A - Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers with GC-MS Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); Appendix A: Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers with GC-MS
DIN EN 62321/VDE 0042-1 Annex C - Determination of chrome(VI) Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); Appendix C: Determination of chromium VI in polymers and electronics using a colorimetric method
DIN EN 62321/VDE 0042-1 chapter 7 (closed vessel/microwave) - Determination of mercury in polymers, metals and electronics Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); § 7: Determination of mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
DIN EN 660-1 - Wear resistance (Stuttgart test) Resilient floor coverings - Determination of wear resistance; Part 1: Stuttgart test
DIN EN 71-11 § 5.8 - Determination of phosphates Safety of toys - Part 11: Organic chemical compounds - methods of analysis; § 5.8: Plasticiser
DIN EN 71-2 - Flammability Safety of toys - Part 2: Flammability
DIN EN 71-3 - Migration of certain elements Safety of toys - Part 3: Migration of certain elements
DIN EN 717-1 - Formaldehyde emission by the chamber method Wood-based panels - Determination of formaldyhyde release - Part 1: Formaldehyde emission by the chamber method
DIN EN 717-2 - Formaldehyde release by the gas analysis method Wood-based panels - Determination of formaldehyde release - Part 2 : Formaldehyde release by the gas analysis method
DIN EN 827 - Determination of conventional solids content and constant mass solids content Adhesives - Determination of conventional solids content and constant mass solids content
DIN EN 863 - Puncture resistance Protective clothing - Mechanical properties - Test method: Puncture resistance
DIN EN 903 (H24) - Determination of anionic surfactants Water quality; Determination of anionic surfactants by measurment of the methylene blue index MBAS
DIN EN 933-1 - Determination of particle size distribution Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DIN EN 933-4 - Determination of particle shape - Shape index Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
DIN EN 933-5 - Determination of percentage of crushed and broken surfaces in coarse aggregate particles Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
DIN EN 986 - Dimensional change Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
DIN EN ISO 105-A04 - Instrumental assessment of the degree of staining of adjacent fabrics Textiles - Tests for colour fastness - Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
DIN EN ISO 105-A05 - Instrumental assessment of change in colour Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
DIN EN ISO 105-A06 - Instrumental determination of 1/1 standard depth of colour Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
DIN EN ISO 105-B02 (procedure 1) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B02 (procedure 2) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B02 (procedure 3) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B02 (procedure 4) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 4)
DIN EN ISO 105-B02 (procedure 5) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 5)
DIN EN ISO 105-B04 (procedure 1) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B04 (procedure 2) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B04 (procedure 3) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B06 (Exp. no. 3) according to, BST 90°C - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exp. Nr. 3), HLA acc. to BST 90°C - Aging test (Multiple Exposure) Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exposure condition no. 1) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 1)
DIN EN ISO 105-B06 (Exposure condition no. 2) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 2)
DIN EN ISO 105-B06 (Exposure condition no. 3) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 3)
DIN EN ISO 105-B06 (Exposure condition no. 3), HLA - Aging test (Multiple Exposure) Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exposure condition no. 5) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 5)
DIN EN ISO 105-C01 - Colour fastness to washing: Test 1 (at 40°C) Textiles - Tests for colour fastness - Part C01: Colour fastness to washing: Test 1 (at 40°C)
DIN EN ISO 105-C02 - Colour fastness to washing: Test 2 (at 50°C) Textiles - Tests for colour fastness - Part C02: Colour fastness to washing: Test 2 (at 50°C)
DIN EN ISO 105-C03 - Colour fastness to washing: Test 3 (at 60°C) Textiles - Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 (at 60°C)
DIN EN ISO 105-C04 - Colour fastness to washing: Test 4 (at 95°C) Textiles - Tests for colour fastness - Part C04: Colour fastness to washing: Test 4 (at 95°C)
DIN EN ISO 105-C05 - Colour fastness to washing: Test 1 (at 95°C) Textiles - Tests for colour fastness - Part C05: Colour fastness to washing: Test 5 (at 95°C)
DIN EN ISO 105-C06 - Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering
DIN EN ISO 105-C08 - Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
DIN EN ISO 105-C10 - Colour fastness to washing with soap or soap and soda Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda
DIN EN ISO 105-C12 - Colour fastness to industrial laundering Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering
DIN EN ISO 105-D01 - Colour fastness to dry cleaning Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning
DIN EN ISO 105-D02 - Colour fastness to rubbing: Organic solvents Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents
DIN EN ISO 105-E01 - Colour fastness to water Textiles - Tests for colour fastness - Part E01: Colour fastness to water
DIN EN ISO 105-E02 - Colour fastness to sea water Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
DIN EN ISO 105-E03 - Colour fastness to chlorinated water Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water)
DIN EN ISO 105-E04 (acid) - Colour fastness to perspiration (acid) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (acidic)
DIN EN ISO 105-E04 (acid) - Colour fastness to perspiration (acid) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (acidic)
DIN EN ISO 105-E04 (alkaline) - Colour fastness to perspiration (alkaline) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (alkaline)
DIN EN ISO 105-E04 (alkaline) - Colour fastness to perspiration (alkaline) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (alkaline)
DIN EN ISO 105-E05 - Colour fastness to spotting - Acid Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting - Acid
DIN EN ISO 105-E06 - Colour fastness to spotting - alkali Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: alkali
DIN EN ISO 105-E07 - Colour fastness to spotting - Water Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water
DIN EN ISO 105-E08 - Colour fastness to hot water (70°C) Textiles - Tests for colour fastness - Part E08: Colour fastness to hot water
DIN EN ISO 105-E09 - Colour fastness to potting Textiles - Tests for colour fastness - Part E09: Colour fastness to potting
DIN EN ISO 105-E10 - Colour fastness to decatizing Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing
DIN EN ISO 105-E12 - Colour fastness to alkaline milling Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling
DIN EN ISO 105-E13 - Colour fastness to acid-felting (Severe) Textiles - Tests for colour fastness - Part E13: Colour fastness to acid-felting (Severe)
DIN EN ISO 105-E14 - Colour fastness to acid-felting (Mild) Textiles - Tests for colour fastness - Part E14 : Colour fastness to acid-felting (Mild)
DIN EN ISO 105-N01 - Colour fastness to bleaching: Hypochlorite Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite
DIN EN ISO 105-N02 - Colour fastness to bleaching: Peroxide Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching: Peroxide
DIN EN ISO 105-N03 - Colour fastness to bleaching: Sodium chlorite (mild) Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
DIN EN ISO 105-N04 - Colour fastness to bleaching: Sodium chlorite (severe) Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
DIN EN ISO 105-P01 - Colour fastness to dry heat (excluding pressing) Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat (excluding pressing)
DIN EN ISO 105-X01 - Colour fastness to carbonizing: Aluminium chloride Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride
DIN EN ISO 105-X02 - Colour fastness to carbonizing: Sulphuric acid Textiles - Tests for colour fastness - Part X02: Colour fastness to carbonizing: Sulphuric acid
DIN EN ISO 105-X04 - Colour fastness to mercerizing Textiles - Tests for colour fastness - Part X04: Colour fastness to mercerizing
DIN EN ISO 105-X05 - Colour fastness to organic solvents Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents
DIN EN ISO 105-X11 - Colour fastness to hot pressing Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing
DIN EN ISO 105-X12 - Colour fastness to rubbing Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
DIN EN ISO 105-X18 - Yellowing by phenols Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials
DIN EN ISO 1133-1 - Determination of the melt flow behavior Plastics- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
DIN EN ISO 1133-2-B - Procedure B: Distance length measuring procedure (method for materials sensitive to time-temperature history and/or moisture) Plastics- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics- Part 2: Method for materials sensitive to time-temperature history and/or moisture
DIN EN ISO 1133-A - Determination of Melt mass-flow rate by mass determination (Method A) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method A: Mass determination procedure)
DIN EN ISO 1133-B - Determination of melt mass-flow rate by length of run measurement (Method B) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method B: length of run measurement)
DIN EN ISO 11339 - separation test (peel test) Adhesives - T-peel test for flexible-to-flexible bonded assemblies
DIN EN ISO 11341 (procedure 1) - Artifical weathering Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (Procedure 1)
DIN EN ISO 11348-2 (L34) - Determination of inhibitory of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) water quality - Determination of inhibitory of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria
DIN EN ISO 11369 (F12) Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
DIN EN ISO 11369 (F12), based on Wasserbeschaffenheit - Bestimmung ausgewählter Pflanzenbehandlungsmittel - Verfahren mit der Hochauflösungs-Flüssigkeitschromatographie mit UV-Detektion nach Fest-Flüssig-Extraktion ,F12 / Pflanzenbehandlungsmittel HPLC
DIN EN ISO 11501 - Measurement of dimensional change Plastics - film and sheeting - Determination of dimensional change on heating
DIN EN ISO 11640 - Colour fastness (Veslic abrasion) Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbung (Veslic abrasion)
DIN EN ISO 11641 - Colour fastness to perspiration Leather - Tests for colour fastness - Colour fastness to perspiration
DIN EN ISO 11642 - Colour fastness to water Leather - Tests for colour fastness- Colour fastness to water
DIN EN ISO 11643 - Colour fastness to dry-cleaning solutions Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions
DIN EN ISO 11644 - Test for adhesion of finish Leather - Test for adhesion of finish
DIN EN ISO 11644 - Test for adhesion of finish Leather - Test for adhesion of finish
DIN EN ISO 11664-4 - Colour measurement (CIELAB) Colorimetry - Part 4: CIE 1976 L*a*b* Color space
DIN EN ISO 1172-A - Residue on ignition Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of textile-glass and mineral-filler content - Calcination methods; Method A: without mineral filling material
DIN EN ISO 1172-B/HCl - Residue on ignition Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of textile-glass and mineral-filler content - Calcination methods; Method A: with mineral filling material
DIN EN ISO 1183-1 (Method A: immersion method) - Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (here: immersion method)
DIN EN ISO 1183-1 (Method B: liquid pyknometer) - Determination of density Plastics - Methods for determining the density of non-cellular plastics - Part1: Immersion method, liquid pyknometer method and titration method (here: liquid pyknometer)
DIN EN ISO 1183-3 (Gas-Pyknometer-Verfahren) - Determination of density Plastics - Methods for determinig the density of non-cellular plastics - Part 3: Gas pyknometer method
DIN EN ISO 11909 - Determination of polyisocyanate Binders for paints and varnishes - Polyisocyanate resins - General methods of test
DIN EN ISO 11997-1 cycle B - Corrosion test Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog) / dry / humidity (here: cycle B)
DIN EN ISO 12185 - Determination of density Crude petroleum and petroleum products - Determination of density - Oscillation U-tube method
DIN EN ISO 12570 - Determination of moisture content Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature
DIN EN ISO 12625-8 - Water-absorption and water-absorption capacity Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
DIN EN ISO 12945-1 - Pilling box method Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method
DIN EN ISO 12945-2 - Modified Martindale method Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method
DIN EN ISO 12947-2 - Determination of specimen breakdown Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
DIN EN ISO 12947-3 - Determination of mass loss Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss
DIN EN ISO 12947-4 - Assessment of appearance change Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change
DIN EN ISO 13934-1 - Tensile properties (strip method) Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 13934-2 - Tensile properties (grab method) Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method
DIN EN ISO 13935-1 - Seam tensile properties (strip method) Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method
DIN EN ISO 13935-2 - Seam tensile properties (grab method) Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
DIN EN ISO 13936-1 - Slippage resistance (Fixed seam opening method) Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method
DIN EN ISO 13936-2 - Slippage resistance (Fixed load method) Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
DIN EN ISO 13937-1 - Determination of tear force using ballistic pendulum method (Elmendorf) Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
DIN EN ISO 13937-2 - Determination of tear force of trouser-shaped test specimens Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
DIN EN ISO 13937-3 - Determination of tear force of wing-shaped test specimens Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
DIN EN ISO 13938-2 - Determination of bursting strength and bursting distension (Pneumatic method) Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension
DIN EN ISO 14125 (Method A) - Determination of flexural properties, three-point flexural test Fibre-reinforced plastic composites - Determination of flexural properties; Method A: Three-point bending test
DIN EN ISO 14125 (Method B) - Determination of flexural properties, four-point flexural test Fibre-reinforced plastic composites - Determination of flexural properties; Method B: Four-point bending test
DIN EN ISO 14130 - Determination of apparent interlaminar shear strength (short-beam method) Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method
DIN EN ISO 14184-1 - Concetration of formaldehyde (water extraction method) Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
DIN EN ISO 1421 - Tensile properties Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
DIN EN ISO 14268 - Water vapour permeability Leather - Physical and mechanical tests - Determination of water vapour permeability
DIN EN ISO 14402 (H37) Water quality - Determination of phenol index by flow analysis (FIA and CFA)
DIN EN ISO 14403 (D6) Water quality - Determination of total cyanide and free cyanide by continuos flow analysis (CFA)
DIN EN ISO 14419 (based on; according to DBL 5463 4.12) - Hydrocarbon resistance test Textiles - Oil repellency - Hydrocarbon resistance test (according to DBL 5463 § 4.12)
DIN EN ISO 14419 - Hydrocarbon resistance test Textiles - Oil repellency - Hydrocarbon resistance test
DIN EN ISO 1456 (Appendix B) - Determination of film thickness Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium Appendix B: Test method for determining film thickness
DIN EN ISO 1463 - Measurement of coating thickness (Microscopical method) Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DIN EN ISO 15088 - NOCH NICHT ÜBERSETZT Water quality - Determination of the acute toxicitx of waste to zabrafisch eggs ( Danio rerio )
DIN EN ISO 1518 - Sratch test Paints and varnishes - Sratch test
DIN EN ISO 15487 - Self-flatness behaviour Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying
DIN EN ISO 15700 - Colour fastness to water spotting Leather - Tests for colour fastness - Colour fastness to water spotting
DIN EN ISO 15702 - Colour fastness to machine washing Leather - Tests for colour fastness - Colour fastness to machine washing
DIN EN ISO 16000-5 / DIN ISO 16000-6 / VDI 4300-6 - Sampling of volatile organic compounds (VOCs) Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) and Part 6: Determination of volatile organic compounds (VOCs) in indoor and test chamber air by active sampling on TENAX TA® sorbent, thermal desorption and gas chromatography using MS/FID
DIN EN ISO 16017-1 - Analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography (Pumped sampling) Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Pumped sampling
DIN EN ISO 16017-2 - Sampling and analysis of volatile organic compounds (Diffusive sampling) Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
DIN EN ISO 1628-1 - Determination of the viscosity number Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
DIN EN ISO 16925 - Resistance to pressure water-jetting Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
DIN EN ISO 17070 - Determination of pentachlorophenol content Leather - Chemical tests - Determination of pentachlorophenol content (PCP)
DIN EN ISO 17075 - Determination of chromium(VI) content Leather - Chemical tests - Determination of chromium (VI) content
DIN EN ISO 17076-1 - Abrasion resistance (Taber method) Leather - Determination of abrasion resistance - Part 1: Taber method
DIN EN ISO 17186 - Surface coating thickness (Microscopical method) Leather - Physical and mechanical tests - Determination of surface coating thickness (Microscopical method)
DIN EN ISO 17186 - Surface coating thickness (Microscopical method) Leather - Physical and mechanical tests - Determination of surface coating thickness (Microscopical method)
DIN EN ISO 17226-1 - Determination of formaldehyde content (HPLC) Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography
DIN EN ISO 17226-2 - Determination of the formaldehyde content (Method using colorimetric analysis) Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis
DIN EN ISO 17294-2 (E29) - inductively coupled plasma mass spektrometry Water quality - Application of inductively coupled plasma mass spektrometry (ICP-MS) - Part 2: Determination of 62 elements
DIN EN ISO 178 (Test in tempering chamber - in cold) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in cold)
DIN EN ISO 178 (Test in tempering chamber - in cold) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in cold)
DIN EN ISO 178 (Test in tempering chamber - in heat) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in heat)
DIN EN ISO 178 (Test in tempering chamber - in heat) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in heat)
DIN EN ISO 178 - Flexural properties Plastics - Determination of flexural properties
DIN EN ISO 178 - Flexural properties Plastics - Determination of flexural properties
DIN EN ISO 17892-1 - Oven drying (105 °C) Geotechnical investigation and testing ¿ Laboraratory testing soil - Part 1: Determination of water content
DIN EN ISO 179-1 (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1 (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eA (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eB (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eC (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eU (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1fU (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 1798 - Tensile properties Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
DIN EN ISO 180/A (Izod impact strength, notched) - Determination of Izod impact properties, notched Plastics - Determination of Izod impact strength (notched, type A)
DIN EN ISO 180/B (Izod impact strength, notched) - Determination of Izod impact properties, notched Plastics - Determination of Izod impact strength (notched, type B)
DIN EN ISO 180/U (Izod impact strength) - Determination of Izod impact properties, unnotched Plastics - Determination of Izod impact strength (unnotched)
DIN EN ISO 1833-11 - Method using sulfuric acid Textiles - Quantitative chemical analysis - Part 11: Mixture of cellulose and polyester fibres (method using sulfuric acid)
DIN EN ISO 18412 (D40) / DIN EN ISO 11885 (E22) - Determination of chromium(VI) Water quality - Determination of Chromium (VI) - Photometric method for weakly contaminated water / Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
DIN EN ISO 1856-A / ISO 1856-A - Compression set at 70°C Flexible cellular polymeric materials - Determination of compression set; Method A: compression set at 70°C
DIN EN ISO 1856-B - Compression set at standard conditioning temperature Flexible cellular polymeric materials - Determination of compression set; method B: Compression set at standard conditioning temperature)
DIN EN ISO 1856-C - Compression set under specially defined conditions Flexible cellular polymeric materials - Determination of compression set; Method C: compression set under specially defined conditions
DIN EN ISO 18857-1 - Determination of selected alkylphenols Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
DIN EN ISO 1923 - Determination of linear dimensions Cellular plastics and rubbers - Determination of linear dimensions
DIN EN ISO 1924-2 - Determination of tensile properties Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min)
DIN EN ISO 1973 - Determination of linear density (Gravimetric method) Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (Gravimetric method)
DIN EN ISO 1973 - Determination of linear density (Vibroscope method) Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (Vibroscope method)
DIN EN ISO 2039-1 - Determination of hardness, Ball indentation method Plastics - Determination of hardness - Part 1: Ball indentation method
DIN EN ISO 2039-2 - Determination of Rockwell hardness Plastics - Determination of hardness - Part 2: Rockwell hardness
DIN EN ISO 20567-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes - Determination of stone-chip resistance of coatins - Part 1: Multi-impact testing
DIN EN ISO 2060 - Determination of linear density by the skein method Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
DIN EN ISO 2061 - Determination of twist in yarns - Direct counting method Textiles - Determination of twist in yarns - Direct counting method
DIN EN ISO 2062 - Tensile properties Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break
DIN EN ISO 2177 - Measurement of coating thickness - Coulometric method by anodic dissolution Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (also ASTM B 504)
DIN EN ISO 22088-3 - per Strain of the outer fibre /Resistance to stress cracking, bent strip method Plastics - Determination of resistance to environmental stress cracking ( ESC ) - Part 3: Bent strip method (replacement for DIN EN ISO 4599)
DIN EN ISO 2286-2 - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate Rubber- or plastics-coated fabric - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DIN EN ISO 2286-3 - Determination of thickness Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
DIN EN ISO 23910 - Stitch tear resistance Leather - Physical and mechanical tests - Measurement of stitch tear resistance
DIN EN ISO 2409 - Cross-cut test Paints and varnishes - Cross-cut test
DIN EN ISO 2409 - Cross-cut test Paints and varnishes - Cross-cut-test
DIN EN ISO 2411 - Determination of coating adhesion Rubber- or plastics-coated fabrics - Determination of coating adhesion
DIN EN ISO 2420 - Determination of apparent density Leather - Physical and mechanical tests - Determination of apparent density
DIN EN ISO 2440 (Dry heat ageing) - Accelerated ageing test Flexible and rigid cellular polymeric materials - accelerated ageing tests (dry heat ageing)
DIN EN ISO 2440 (humidity ageing) - Accelerated ageing test Flexible and rigid cellular polymetric materials - Accelerated ageing tests (humidity ageing)
DIN EN ISO 2589 - Determination of thickness Leather - Physical and mechanical tests - Determination of thickness
DIN EN ISO 26082 - Soiling and cleanability with modified Martindale method Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather
DIN EN ISO 2719 (PM) Determination of flash point - Pensky-Martens closed cup method , 40-200°C (ex. DIN EN 22719)
DIN EN ISO 2808-6A (ISO 2808-6A) - Determination of film thickness - Microscopic examination of cross-section Paints and varnishes - Determination of film thickness - Method 6A: cross microsection / cross-section
DIN EN ISO 2808-7C (ISO 2808-7C) - Determination of film thickness - magnetic-induction principle Paints and varnishes - Determination of film thickness - Method 7C: magnetic-induction principle
DIN EN ISO 2811-1 - Determination of density (pyknometer) Paints and varnishes - Determination of density - Part 1: Pyknometer method
DIN EN ISO 2811-2 - Determination of density (Immersed body method) Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
DIN EN ISO 2812-3 - Resistance to liquids - Method using an absorbent medium Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
DIN EN ISO 2812-4 - Resistance to liquids - Spotting methods Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
DIN EN ISO 2813 - Gloss measurement Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
DIN EN ISO 2813 - gloss measurment Paints and varnishes - Determination of specular gloss of non-metallic coatings with 20 °, 60 ° and 85 ° (according to JIS K 5400 & MS & MS 652-14 600-60.)
DIN EN ISO 294-4 - Injection moulding of test specimens of thermoplastic materials (Determination of moulding shrinkage) Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shinkage
DIN EN ISO 3037 - Determination of edgewise crush resistance Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxes edge method)
DIN EN ISO 306 - Vicat softening temperature Plastics - Thermoplastics material - Determination of Vicat softening temperature (VST)
DIN EN ISO 307 - Determination of viscosity number Plastics - Polyamides - Determination of viscosity number
DIN EN ISO 3071 - Determination of pH value Textiles - Determination of pH of aqueous extract
DIN EN ISO 3104 Petroleum products -Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DIN EN ISO 3146-C2 - Determination of melting behaviour (DSC) Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers (Part C2 = DSC, no longer in version 2002-06)
DIN EN ISO 3175-2 - Dry cleaning and finishing (Procedures for tetrachloroethene) Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene
DIN EN ISO 32100 - Flex resistance (flexometer method) Rubber- or plastic-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method
DIN EN ISO 3231 - Corrosion resistance (Kesternich test) Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
DIN EN ISO 3344 - Determination of moisture content Reinforcement products - Determination of moisture content
DIN EN ISO 3376 - Tensile properties Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DIN EN ISO 3376 - Tensile properties Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DIN EN ISO 3377-1 - Tear load Leather - Physical and mechanical test - Determination of tear load - Part 1: Single edge tear
DIN EN ISO 3377-1 - Tear load (single edge tear) Leather - Physical and mechanical test - Determination of tear load - Part 1: Single edge tear
DIN EN ISO 3385 - Determination of fatigue by constant load pounding Flexible cellular polymeric materials - Determination of fatigue by constant load pounding
DIN EN ISO 3386-1 - Stress-strain characteristics in compression (low-density materials) Polymeric materials, celular flexible - Determination of stress-strain characteristics in compression - Part 1: low-density materials
DIN EN ISO 3386-2 - Stress-strain characteristic in compression (High-density materials) Polymeric materials, cellular flixible - Determination of stress-strain characteristics in compression - Part 2: High-density materials
DIN EN ISO 3451-1-A - Determination of ash Plastics - Determination of ash - Part 1: General methods (here: procedure A: direct ash)
DIN EN ISO 3451-4-A (PA) - Ash content in Polyamides Plastics - Determination of ash - Part 4: Polyamides (here: method A: direct ash)
DIN EN ISO 3451-5-A (PVC) - Ash content in PVC Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (here: method A: direct ash)
DIN EN ISO 3497 - Determination of coating thickness Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
DIN EN ISO 3668 - Visual comparison of the colour of paints Paints and varnishes - Visual comparison of the colour of paints
DIN EN ISO 3675 - Determination of density (Hydrometer method) Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
DIN EN ISO 3679 - Determination of flash point Determination of flash point - Rapid equilibrium closed cup method
DIN EN ISO 3759 - Determination of dimensional change Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
DIN EN ISO 4045 - Determination of pH value Leather - Determination of pH
DIN EN ISO 4048 - Determination matter soluble in dichloromethane Leather - Determination matter soluble in dichloromethane
DIN EN ISO 4048 - Determination of matter soluble in dichlormethane and free fatty acid content Leather - Determination of matter soluble in dichlormethane and free fatty acid content
DIN EN ISO 4628-1 - Evaluation of degradation of coatings Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - part 1 : General introduction and designation system
DIN EN ISO 4628-2 - Assessment of degree of blistering Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
DIN EN ISO 4628-3 - Assessment of degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
DIN EN ISO 4628-4 - Assessment of degree of cracking Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
DIN EN ISO 4628-5 - Assessment of degree of flaking Paints and varnishes - Evaluation of degredation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
DIN EN ISO 4628-8 - Assessment of degree of delamination and corrosion around a scribe Paints and varnishes - Evaluation of degradation of coatings - Designation of quantiy and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (Replaced for DIN 53167)
DIN EN ISO 4674-1 - Determination of tear resistance (Constant rate of tear methods) Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
DIN EN ISO 4674-2 - Determination of tear resistance (Ballistic pendulum method) Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method
DIN EN ISO 4684 - Determination of volatile matter Leather - Chemical tests - Determination of volatile matter
DIN EN ISO 4892-2 (Method A - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 100°C
DIN EN ISO 4892-2 (Method A - BST 65°C / Flat bed device) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C / Flat bed device
DIN EN ISO 4892-2 (Method A - BST 65°C / Flat bed device) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C / Flat bed device
DIN EN ISO 4892-2 (Method A - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C
DIN EN ISO 4892-2 (Method A - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C
DIN EN ISO 4892-2 (Method B - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 100°C
DIN EN ISO 4892-2 (Method B - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 100°C
DIN EN ISO 4892-2 (Method B - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 65°C
DIN EN ISO 4892-2, according to - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
DIN EN ISO 4920 - Determination of resistance to surface wetting (Spray test) Textile fabrics - Determination of resistance to surface wetting (Spray test)
DIN EN ISO 5077 - Determination of dimensional change Textiles - Determination of dimensional change in washing and drying
DIN EN ISO 5079 - Tensile properties of individual fibres Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres
DIN EN ISO 5084 - Determination of thickness Textiles - Determination of thickness of textiles and textile products
DIN EN ISO 527-2 (Test in tempering chamber - in cold) - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (Test in tempering chamber - in cold)
DIN EN ISO 527-2 (Test in tempering chamber - in heat) - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (Test in tempering chamber - in heat)
DIN EN ISO 527-2 - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
DIN EN ISO 527-3 - Tensile properties Plastics - Determiantion of tensile properties - Part 3: Text conditions for films and sheets
DIN EN ISO 527-4 - Tensile properties Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DIN EN ISO 527-5 - Tensile properties Plastics - Determiantion of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DIN EN ISO 5398-4 - Determination of chromic oxide content Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES)
DIN EN ISO 5402 - Flex resistance (Flexometer method) Leather - Physical and mechanical tests - Determination of flex resistance by Flexometer method
DIN EN ISO 5402-1 - Permanent folding (Fexometer - method) Leather - Determination of flex resistance - Part 1: Flexometer method
DIN EN ISO 5470-1 - Determination of abrasion resistance (Taber abrader) Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
DIN EN ISO 60 - Determination of bulk density Plastics - Determination of apparent density of material that can be poured from a specified funnel
DIN EN ISO 604 - Compressive Properties Plastics - Determination of compressive properties
DIN EN ISO 62 - Water absorption Plastics - Determination of water absorption
DIN EN ISO 6222 (K5) Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in an nutrient agar culture mediu, (total germs at 22°C (68h) and 36°C (44h)
DIN EN ISO 6245 - Determination of ash Mineral oil products - Determination of ash (775°C)
DIN EN ISO 6270-2-AHT - Condensation climate with alternating humidity and air temperature Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation climate with alternating humidity and air temperature)
DIN EN ISO 6270-2-AT - Condensation climate with alternating air temperature Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation climate with alternating air temperature)
DIN EN ISO 6270-2-CH - Condensation atmosphere with constant humidity Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation atmosphere with constant humidity)
DIN EN ISO 6330 - Domestic washing and drying procedures for textile testing Textiles - Domestic washing and drying procedures for textile testing
DIN EN ISO 6427 (ISO 6427 : 1992) - Determination of matter extractable by organic solvents Plastics - Determination of matter extractable by organic solvents (conventional methods)
DIN EN ISO 6468 (F1) Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction
DIN EN ISO 6468 (F1), based on - selected organic-chlorine compound Water quality - Determination of certain organochlorine insecticides, polychlorine biphenyls and chlorobenzenes - Gas - chromatographic method after liquid - liquid extraction
DIN EN ISO 6507 - Vickers hardness test Metallic materials - Vickers hardness test - Part 1: Test method; Part 2: Verification and calibration of testing machines; Part 3: Calibration of reference blocks; Part 4: Tables of hardness values
DIN EN ISO 6603-1 - Puncture impact behaviour - Non-instrumented impact testing Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DIN EN ISO 6603-2 - Puncture impact behaviour - Instrumented impact testing Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test
DIN EN ISO 6721-2 - Determination of dynamic mechanical properties (Torsion-pedulum method) Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pedulum method
DIN EN ISO 6941 - Burn behaviour (vertical) Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
DIN EN ISO 6942 - Evaluation of materials and material assemblies when exposed to a source of radiant heat Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
DIN EN ISO 6988 - Sulfur dioxide test with general condensation of moisture Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
DIN EN ISO 75-2 - Determination of temperature of deflection under load Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
DIN EN ISO 75-2 - Determination of temperature of deflection under load (Plastics and ebonite) Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
DIN EN ISO 787-10 - Determination of density (Pyknometer method) General methods of test for pigments and extenders - Part 10 : Determination of density (Pyknometer method)
DIN EN ISO 787-2 - Determination of matter volatile at 105 °C General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 ° C
DIN EN ISO 787-3 - Determination of matter soluble in water (Hot extraction method) General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water (Hot extraction method)
DIN EN ISO 787-5 - Determination of oil absorption value General methods of test for pigments and extenders - Part 5: Determination of oil absorption value
DIN EN ISO 787-9 - Determination of pH value General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension
DIN EN ISO 8067 - Determination of tear strength Flexible cellular polymeric materials - Determination of tear strength
DIN EN ISO 8256 (tensile­impact strength unnotched) - Determination of tensile­impact strength Plastics - Determination of tensile-impact strength (unnotched)
DIN EN ISO 845 - Determination of apparent density Cellular plastics and rubbers - Determination of apparent density
DIN EN ISO 846-A - Action of microorganisms - method A Plastics - Evaluation of the action of microorganisms; Method A: Fungal growth test
DIN EN ISO 846-B - Evaluation of the action of microorganismes - procedure B Plastics - Evaluation of the action of microorganisms; Method B: Fungi static effect
DIN EN ISO 846-C - Evaluation of the action of microorganismes - procedure C Plastics - Evaluation of the action of microorganisms; Method C: Resistance against bacteria
DIN EN ISO 8510-2 - Peel test (180 degree) Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel
DIN EN ISO 868 (Shore A) - Determination of Shore A hardness Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness A)
DIN EN ISO 868 (Shore D) - Determination of Shore D hardness Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness D)
DIN EN ISO 9073-15 - Air permeability Textiles - Test methods for nonwovens - Part 15: Determination of air permeability
DIN EN ISO 9073-18 - Tensile properties (grab tensile test) Textiles - Testmethods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
DIN EN ISO 9073-2 (based on) - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness
DIN EN ISO 9073-2 - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness
DIN EN ISO 9073-2 Method A - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness (Method A)
DIN EN ISO 9073-4 - Determination of tear resistance (Trapezoid tear strength) Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (Trapezoid tear strength)
DIN EN ISO 9227-AASS - Acetic acid salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Acetic acid salt spray test, AASS test)
DIN EN ISO 9227-CASS - Copper-accelerated salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Copper-accelerated salt spray test, CASS test)
DIN EN ISO 9227-NSS - Neutral salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Neutral salt spray test, NSS test)
DIN EN ISO 9237 - Permeability of fabrics to air Textiles - Determination of the permeability of fabrics to air
DIN EN ISO 9308 (K13) - Detection and enumeration of Escherichia coli and coliform bavteria Water quality - Detection and enumeration of Escherichia coli and coliform bavteria in surface and waste water - Part 3: Miniaturized method (Most Probable Number) by inoculation in liquid medium
DIN EN ISO 9308-1 (K12) - Detection and enumeration of Escherichia coli and coliform bacteria Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: membrane filtration method
DIN EN ISO 9863-1 - Determination of thickness Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
DIN EN ISO 9864 - Determination of mass per unit Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
DIN ISO 10694 - Determination of organic and total carbon Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
DIN ISO 11465 - Determination of dry matter and water content on a mass basis Soil quality - Determination of dry matter and water content on a mass basis - Gravimetric method, (105°C)
DIN ISO 12884/ VDI 4300-2 - Sampling for PAH Ambient air - Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/ mass spectrometric analysis (Sampling for PAH)
DIN ISO 16000-3 - Determination of formaldehyde and other carbonyl compounds Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method
DIN ISO 16000-3 / VDI 4300-3 - Indoor air sampling of carbonyl compounds Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method (Indoor air pollution measurment - general aspects of formaldehyde measurements strategy)
DIN ISO 16000-6 / TDS-GC-MSD - Determination of volatile organic compounds (VOC) Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on TENAX TA® sorbent, thermal desorption and gas chromatography using MS/FID
DIN ISO 1817 - Effect of liquids Rubber, vulcanized - Determination of the effect of liquids
DIN ISO 1887 - Determination of combustible matter content Textile glass - Determination of combustible matter content
DIN ISO 2285 - Determination of tension set under constant elongation Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep unter constant tensile load (here: constant elongation)
DIN ISO 2285 - Tension set under constant elongation Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep unter constant tensile load (here: constant elongation)
DIN ISO 2796 - Test for dimensional stability Cellular plastics, rigid - Test for dimensional stability
DIN ISO 34-1-A - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-B - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece))
DIN ISO 3415 - Thickness loss Textile floor coverings - Determination of thickness loss after brief, moderate static loading
DIN ISO 3451-2 - Ash content Plastics - Determination of ash - Polyalkylene terephthalates
DIN ISO 3451-3-A - Ash content in unplasticized cellulose acetate Plastics - Determination of ash - Part 3: Unplasticized cellulose acetate (Method A: direct ash)
DIN ISO 3733 - Determination of water - Distillation method Petroleum products and bituminous materials - Determination of water - Distillation method
DIN ISO 3865-A1 - Contact and migration staining without irradiation Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material; Method A1: Contact and migration staining without irradiation
DIN ISO 4649-A - Abrasion resistance (non-rotating test specimen) Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device; Method A: non-rotating test specimen
DIN ISO 48 - Determination of hardness Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Method H: Test at high hardness, Method L: Test at low hardness, Method M: Microhardnesstest but NOT method N: normal test
DIN ISO 6133 Procedure B - Analysis of multipeak traces Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion
DIN ISO 7619-1 (Shore A) - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
DIN ISO 7619-1 (Shore A) / testing in cold - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in cold
DIN ISO 7619-1 (Shore D) - Determination of Shore D hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
DIN ISO 7743-A - Compression stress-strain properties, Method A Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties; Method A: Standard test specimen with lubricated metal plates
DIN ISO 7743-B - Compression stress-strain properties, Method B Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties; Method B: Standard test specimen with on test specimen bonded metal plates
DIN ISO 815 - Determination of compression set Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
DIN ISO 815-1 - Determination of compression set Rubber, vulcanizid or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
DIN ISO 9354 - Coding system of waves Textiles - Weaves - Coding system and examples
DIN SPEC 18035-7 Sports grounds - Part 7: Synthetic turf areas; table 20 / test on laboratory scale prepared samples Requirements and laboratory tests for tennis
DIN V 53160-1 - Resistance to artificial saliva Determination of the colourfastness of articles in common use - Part 1: Resistance to artificial saliva
DIN V 53160-2 - Resistance to artificial sweat Determination of the colourfastness of articles in common use - Part 2: Resistance to artificial sweat
Disassembling force Disassembling force (according customer requirements)
Displacement distance Displacement distance (according customer requirements)
Displacement force Displacement force (according customer requirements)
DLE/Dräger-test tube; on-site - Dräger air extraction Dräger air extraction
Draw-off force/mount force (according customers requirememt) Draw-off force / mount force (acc. to drawing)
Drop test Drop test
Drop test Drop test (dropping a component on the floor, e.g. Volvo TR 31825672 § 1.6.14)
Dubpernell method Dubpernell method (crack density, pore density)
Dynamic mechanical analysis (DMA)