imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Fastness to rubbing (crockmeter) Fastness to rubbing (crockmeter, abrasion)
Fastness to water spotting Genrell test method - Fastness to water spotting (e.g. BMW GS 93026-1)
FCA / Chrysler group MS-JP-9-5: Weathering of Plastics Exterior Applications - Performance Weathering of Plastics Exterior Applications
FCA 50451/ LP.7M006 - Method A (WOM / Xenon arc) - Accelerated weather resistance test (for exterior parts) Accelerated aging by atmospheric agents, Method A
FCA 7.M9001 / LP.7M042 (Test 2) - Cold bending test Surface treated rubber sections, Cold bending test
FCA 7.M9001 / LP.7M042 (Test 3) - Tensile properties Surface treated rubber sections, Elongation strength test
FCA 7.M9001 / LP.7M042 (Test 4) - Cross-hatching incision test Surface treated rubber sections, Adhesion test
FCA 9.03119/03: Coated Elastomer Components
FCA 9.55421/03: Coated fabrics for convertible tops
FCA LP-463DD-18-02 / Method A (Scratch) - Scratch resistance / cross cut Scratch and mar resistance of automotive plastics using Erichsen scratch hardness tester, § 11.1 Method A
FCA LP-463DD-18-02 / Method B (Mar) - Mar resistance / cross cut Scratch and mar resistance of automotive plastics using Erichsen scratch hardness tester, § 11.2 Method B
FCA LP.7M052 - Determination of staining Automotive fluids staining of plastics - determination of
FCA Materials Standards 55231/01: Alloys of Polycarbonate + Molding and Extrusion ABS -PC+ABS/PC+AES-
FCA MS-AY-309: Cellular Polyurethane for Seats and Interior Trim Applications
FCA MS.90095 Part B ( Fiat 7-G2000) - burning behaviour FCA MS.90095: Resistance to Combustion of the non-metallic materials Part B (Fiat 7-G2000) Determining the resistance to combustion of the non-metallic materials for parts inside vehicle passenger compartment
FCA PF.90117: Floor Mats (Carpeted and All Weather)
FCA PF.90192: Floor Console Assembly
FCA PF.90223: Instrument Panel Module Assembly
FCA PF.90325: Steering Wheel Capacitive Sensing System
FCA PS.50014 § 4.5.2.5 - Cyclic corrosion test with CASS salt spray test Copper-Nickel-Chromium (Chromium-Plating) Coating of Thermoplastic Parts § 4.5.2.5 Cyclic corrosion test with CASS salt spray test acc. to ASTM B368 (for platings acc. to Methods 1A and 1B only)
FCA PS.50014: Copper-Nickel-Chromium (Chromium-Plating) Coating of Thermoplastic Parts
Fiat 50180 method A1 - Salt spray test Corrosion tests - method A1: Salt spray test
Fiat 50180 Method A3 - Copper-accelerated acetic acid salt spray test (CASS-Test) Corrosion tests - Method A3: Copper-accelerated acetic acid salt spray test (CASS-Test)
Fiat 50184-A - Dry heat test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method A (Dry heat test)
Fiat 50184-B - Damp heat test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method B (Damp heat test)
Fiat 50184-C - Low temperature test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method C (Low temperature test)
Fiat 50184-D - Temperature cycling Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method D (Temperature cycling)
Fiat 50423 § 2 - Compression Deflection Test for compression-deflection, compression/tension set and apparent density of expanded cellular materials
Fiat 50423 § 3.1 - Compression test Test for compression-deflection, compression/tension set and apparent density of expanded cellular materials
Fiat 50438 - Permanent folding (Fatigue Test, Bally Flex Test) Bally Fatigue Test for Letaher and Imitation Leather
Fiat 50440 - Mass determination Mass determination - Fabrics, waterproof fabrics, leather, imitation leathers and vinyl sheets
Fiat 50441/05 - Adhesion test Separation resistance - Trim materials and associated backing mated with polyurethane sheet
Fiat 50444 § 1.1.2 (Crockmeter) - Color fastness to rubbing Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.1.2 Crock test, color fastness to rubbing
Fiat 50444 § 1.1.2 (Crockmeter) - Color fastness to rubbing Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.1.2 Crock test, color fastness to rubbing
Fiat 50444 § 1.2 - Hot aging Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.2 Hot aging
Fiat 50451 (Xenon arc lamps) - Artifical weathering Accelerated weathering test (Xenotest)
Fiat 50451/01 - Method A (carbon arc) - Accelerated ageing, Fade-ometer Accelerated ageing in sunlight; Method A: Fade-ometer
Fiat 50451/01 - Method B (xenon arc) - Accelerated ageing, Xenotest Accelerated ageing in sunlight; Method B: Xenotest
Fiat 50455-08 - Amine contamination resistance Amine contamination resistance
Fiat 50455/10 - Determination of fabric abrasion resistance by the Taber method Determination of fabric abrasion resistance by the Taber method
Fiat 50457 - Gloss measurement Tests for nonmetallic materials - Specular gloss determination for paints, varnishes and enamels by glossmeter
Fiat 50461 - Cross-cut test Adhesion test of inorganic and organic trims by squaring off
Fiat 50470 - Water resistance test Water resistance test for decorations and paints
Fiat 50471/01 - Artificial weathering Alternating Ultraviolet Radiation / Humidity Resistance Test
Fiat 50473 - Resistance to chemical agents Determination of the Resistance to Gasoline of Paints, Enamels and Related Products
Fiat 50473/01 - Method A - Resistance to chemical agents Determination of the Resistance to Chemical Agents of Products, § 3.1 Method A (sulfuric acid)
Fiat 50473/01 - Method B - Resistance to chemical agents Determination of the Resistance to Chemical Agents of Products, § 3.2 Method B (windscreen washer)
Fiat 50473/01 - Method C - Resistance to chemical agents Determination of the Resistance to Chemical Agents of Products, § 3.3 Method C (mineral oil)
Fiat 50496 - Colour fastness in water Textiles: Colour fastness in water of automobile interior fabrics
Fiat 55232: Rigid Polyamide Plastics for Moulding and Extrusion
Fiat 7-G2000 - Burning behaviour Determining the resistance to combustion of the non-metallic materials for parts inside vehicle passenger compartment
Fiat 7-G2090-A - Determination of Formaldehyde content Vehicle interior components - Formaldehyde release test - Acetyl acetone method - materials: Type A
Fiat 7-G2090-B - Determination of Formaldehyde content Vehicle interior components - Formaldehyde release test - Acetyl acetone method - material: Type B
Fiat 7-M0001 - Colour measurement (CIELAB) Colour evaluation on aesthetic surfaces in plastic
Fiat 7-M0002 / Fiat 7.M0001 - Gloss measurement / colour meausrement Evaluation the gloss of plastics / Colour evaluation on aesthetic surfaces in plastic
Fiat 7-M0003 - Evaluation of the embossing Evaluation of the embossing of plastic materials
Fiat 7-M0005 - Resistance to scratching Molded plastic trim components - Resistance to scratching (followed by a colour measurement)
Fiat 7-M8607 - Rotting evaluation Pre-formed textile material - Rotting evaluation
Fiat 7.G2091 - Determination of free Phenol-content Phenolic resin base materials - Free phenol content
Fiat 7.M8300 § 1.4 - Indentation load deflection on specimens Cellular polyurethane padding for motor vehicle seat cushions and backs; § 1.4: Indentation load deflection on specimens
Fiat 7.M8300 § 1.6 - Compression set Cellular polyurethane padding for motor vehicle seta cushions and backs; § 1.6 Compression set
Fiat 9.02110: Steering Wheels Steering Wheel
Fiat 9.03135: Cellular polyurethane padding for motor vehicle seat cushions and backs Conventional seat cushions and backs (spring), Seats with pan-type frame (springless)
Fiat 9.03138. Automotive Seat Head Restraints Seat Head Restraints
Fiat 9.03141/04: Consoles on the Tunnel Consoles on the Tunnel
Fiat 9.03141: Instrument panels Instrument panels
Fiat 9.03159: Door panels and rear side trim Door panels and rear side trim
Fiat 9.03160 § 2.17 - Rot resistance Preformed car headliners; § 2.17: Rot resistance
Fiat 9.03162 § 2.12 - Wear Resistance Handgrip for gearbox lever (assembly); § 2.12: Wear resistance
Fiat 9.03168 § 2.20 - Resistance to chemical agents Armrests and fixed handles on door panels - § 2.20 Resistance to chemical agents
Fiat 9.03176-01 § 2.11.6.2 - Chemical agents resistance (crock meter test AATCC 8) Safety belts (assembly); § 2.11.6.2: Resistance to chemical agents for the tape homologation label
Fiat 9.55253 § 2.7.2 - Surfactant - Resistance to test medium Specification for miscellaneous plastic components; § 2.7.2: Surfactant - Resistance to test medium
Fiat 9.55253: Miscellaneous plastic components (Thermoplastic or thermosetting) For thermoplastic and thermosetting plastic components.
Fiat 9.55441: Fabric for Vehicle Interiors - General requirements
Fiat 9.55455: Flocking on non-metallic materials (elastomers excluded) for automobile interior
Fiat 9.55842-01 § 2.19 - Resistance to wear Aesthetic and operational finishing of parts made of plastic materials obtained by painting or other processes; § 2.19: Resistance to wear
Fiat 9.55842/01: Aestethic and operational finishing of parts made of plastic materials obtained by painting or other processes Aestethic and operational finishing of parts made of plastic materials obtained by painting or other processes
Fiat 9.55842/01: Aestethic and operational finishing of parts made of plastic materials obtained by painting or other processes
Fiat 9.57413: Copper-Nickel-Chromium - (Chromium-Plating) Coating of parts made of plastic material For copper-nickel-chromium coatings applied on thermoplastic material. Some examples of application are provided by masks for radiator grids, moldings, border, handles, instrument panels for dashboards, frames, headlamp bodies, etc.
Fiat Chrysler 9.55260/02: Parts in expanded material for seals and/or anti-vibration inserts
Fiat Chrysler Group - FCA PF-11203: Material Durability Requirements for Interior Plastic Trim Components
Fiat Chrysler MS 9.55369: Bonding of aesthetic interior trim linings (fabrics, leather)
Fiat Chrysler MS-JE-9000: Automotive Seat Belt Webbing
Fiat Chrysler PF.90045: Flocking on non-metallic materials for Automotive Interior Surfaces Glove Box inner, Glove Box bin
Fiat Chrysler PF.90058: Door Trim Panel Assembly - Performance Standard
Fiat Chrysler PF.90059: Headliner Headliner
Fiat/Chrysler CS-A0228 - Odor test Odor evaluation of parts, components and assemblies
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat/Chrysler Group MS.90053: Coating Performance Requirements for painted interior parts Coating Performance Requirements for painted Interior parts
Fiat/Chrysler Group MS.90053: Organic Coatings Performance Requirements for Painted Interior Parts
Fiat/Chrysler Group MS.90118: Harmonized-Interior Components with Decorative Wood Finish
Fiat/Chrysler LP 463KC-04-01 (Procedure 1) - Grease cleanability Cleanability of Interior Trim § 1. Procedure 1 - Grease cleanability
Fiat/Chrysler LP 463KC-04-01 (Procedure 3) - Resistance to cleaning agents (Crockmeter) Cleanability of Interior Trim § 3. Procedure 3 - Crock cleaning of vinyl coated fabrics, leather, and coated boards
Fiat/Chrysler LP-463KC-04-01 Procedure 2 - General cleanability Cleanability of Interior Trim § 2. Procedure 2 - General cleanability of trim materials
Fiat/Chrysler LP-463KC-09-01 - dry - Odor test Odor evaluation of interior trim materials - procedure: dry
Fiat/Chrysler LP-463KC-09-01 - Odor test Odor evaluation of interior trim materials
Fiat/Chrysler LP-463KC-09-01 - wet - Odor test Odor evaluation of interior trim materials - procedure: wet
Film thickness (microscopy) Film thickness (microscopy)
Filter paper test Filter paper test
Flexural stress Flexural stress
Float wear (acc. to customer's requirement, Bosch company) - Abrasion behaviour Effect of mechanical stress (friction) on the fuel float of the level sensor
Flock identification (qualitative pretest) Flock identification
FMVSS 209 § 5.1.e - Resistance to light Federal Motor Vehicle Safety Standard - Seat belt assemblies; § 5.1.e - Resistance to light
FMVSS 302 / US 571.302 (TP 302-03) - Burning behaviour Flammability of interior materials
Foam adhesion, manual
Footfall examination Footfall examination under temperature influence (eg, Daimler FuVo A 001 001 90 99 cover strip)
Ford BZ 108-01 - Determination of volatile organic compounds 10-L Bag Method for Measuring VOC Emissions from Vehicle Interior Materials
Ford CETP-00.00-L-467 - Corrosion test Global Laboratory Accelerated Cyclic Corrosion Test
Ford Crease test Engineering Material Specification - Crease Test - WMD and AMD
Ford DVM-0007-MA-D - Coating adhesion, Methode D (Scribe Test) Coating adhesion test; Method D: Scribe Test
Ford DVM-0017-MA - Soiling and cleaning behavior Soiling and cleaning behavior of interior materials
Ford DVM-0019-MA - Scratch Resistance Scrat Resistance
Ford DVM-0033-SH - Cold temperature set test Cold temperature set test (Floor mat samples / carpet)
Ford DVM-0036-MA - Sunscreen resistance test Sunscreen resistance test
Ford DVM-0039-MA - Insect repellent resistance Insect repellent resistance
Ford DVM-0053-ST - Manual Tip Slide Life Cycle Seat
Ford DVM-0055-MA - Abrex Abrasion Test Abrex Abrasion Test
Ford ES-2U5A-1A263-AA: Smooth Flexible Tubing Performance Specification Flexible, straight or smooth surface tubing used for Ford electrical distribution systems
Ford ES-D8VH-19A672-AA-§ IIIA - Resistance to fungal growth Biostatic effectiveness and biostatic concentration of materials used in an air conditioning assembly such as adhesives, foam, expanded rubber or other synthetic polymeric materials
Ford ESB-M70J5-A: Paint, Powdered, Thermosetting Polyester Material requirements for thermosetting polyester powder coatings as applied to. For powder coatings used on automotive vent window and division bar assemblies as an alternate coating to that provided by ESB-M6J119 primer and ESB-M32J101 enamel combined.
Ford EU AN 1-1 (Water spotting) - Water spotting test Resistance of Textiles to Bleeding, Perspiration and Water Spotting
Ford FLTM AN 101-01 (perspiration) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water spotting) - Resistance to water spotting Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM BI 009-05 - Bending test Bending Test for Coating Adhesion
Ford FLTM BI 103-01 - Salt spray resistance test Salt spray resistance test for painted panels and parts (gem. ASTM B 117)
Ford FLTM BI 104-01 - Water immersion test Water immersion test for painted parts and panel
Ford FLTM BI 104-02 - Condensing water vapor test Condensing water vapor test
Ford FLTM BI 106-01-A - Coating adhesion test, Paint adhesion test, Method A (Scratch Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method A (Scratch Test)
Ford FLTM BI 106-01-B - Coating adhesion test, Paint adhesion test, Method B (Scribe Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method B (Scribe Test)
Ford FLTM BI 106-01-B - Scribe test Coating adhesion test, Method B (Scribe Test)
Ford FLTM BI 106-01-C - Coating adhesion test, Paint adhesion test , Method C (Parallel Scratch Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method C (Parallel Scratch Test)
Ford FLTM BI 106-01-D - Adhesion test Coating adhesion test, Method D (Adhesion Test for Flexible Coatings)
Ford FLTM BI 106-01-D - Coating adhesion test, Paint adhesion test , Method D (Scribe Test for Two-Component Urethane Coatings) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method D (Scribe Test for Two-Component Urethane Coatings)
Ford FLTM BI 106-01-D - Coating adhesion test, Paint adhesion test, Method D (Adhesion Test for Flexible Coatings) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method D (Adhesion Test for Flexible Coatings)
Ford FLTM BI 106-01-E - Coating Adhesion test Methode E Adhesion of coatings (for coatings and finishes on steel, aluminum, galvanized steel, plastic or other substrates), Method E (adhesion test for parting lines, radius and edges)
Ford FLTM BI 106-03 - Hydrolysis resistance Hydrolysis resistance of painted plastic panels
Ford FLTM BI 109-01 - Color matching with artificial light Color matching with artificial light
Ford FLTM BI 109-01 - Visual appearance evaluation Visual appearance evaluation
Ford FLTM BI 109-03 - Color measurement Color difference evaluation of textile materials
Ford FLTM BI 110-01 - Gloss measurement Measurement of the gloss of paint panels
Ford FLTM BI 110-01 - Gloss measurement Measurement of the gloss of paint panels
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-02 - Resistance to acid spotting Resistance to acid spotting
Ford FLTM BI 113-03 - Resistance to synthetic perspiration staining Resistance to synthetic perspiration staining
Ford FLTM BI 113-05 - Resistance to acid spotting Resistance to acid spotting of painted test panels or actual finished parts
Ford FLTM BI 113-06 - Resistance to perspiration Test method for resistance to perspiration
Ford FLTM BI 113-07 - Resistance to synthetic perspiration staining Resistance to synthetic perspiration staining
Ford FLTM BI 113-08 - Resistance to sunscreen lotion and insect repellent Resistance to sunscreen lotion and insect repellent
Ford FLTM BI 113-08 - Resistance to sunscreen lotion and insect repellent Resistance to sunscreen lotion and insect repellent
Ford FLTM BI 123-01 - Corrosion Test Painted sheet metal corrosion test - Laboratory-Simulated Arizona Proving Ground Test
Ford FLTM BI 123-03 - Component corrosion test Component corrosion test (salt spray test)
Ford FLTM BI 157-06 - Stone chip resistance High performance stone chip resistance test, new rating scale
Ford FLTM BI 161-01 - Mar Resistance Mar resistance determination for automotive coatings
Ford FLTM BI 168-01 - Fluid resistance Fluid resistance of chassis and exterior materials for incidential exposure
Ford FLTM BI 168-01 - Fluid resistance Fluid resistance of chassis and exterior materials for incidential exposure
Ford FLTM BN 024-02 - Flammability Flammability test for automotive interior materials
Ford FLTM BN 102-01-A - Low temperature flexibility Polymeric materials, low temperature flexibility
Ford FLTM BN 102-02 - Flexural test Flex test for polymeric coated fabrics, genuine leathers and woven fabrics
Ford FLTM BN 103-01 - Resistance to migration staining and blocking Resistance of coated fabrics and plastic film to migration staining and blocking
Ford FLTM BN 105-01 - Shrinkage test Shrinkage test for textiles and artificial leathers
Ford FLTM BN 105-03 - Dimensional stability Dimensional stability of textile trim materials
Ford FLTM BN 106-01-A - Determination of the mass per unit area Determination of weight per unit area and density of trim materials (here: weight per unit area)
Ford FLTM BN 106-01-B (contains Proc. A) - Determination of density Determination of weight per unit area and density of trim materials
Ford FLTM BN 106-02 - Seam Deterioration (Fatigue) Seam Fatigue Testing
Ford FLTM BN 106-02 - Seam Fatigue Seam Fatigue Testing
Ford FLTM BN 107-01 - Crocking test Crocking Test
Ford FLTM BN 107-01 - Crocking test Crocking Test - instrumental evaluation
Ford FLTM BN 108-01 - Resistance of textile fabrics to abrasion (Stoll Quartermaster - Universal Wear Tester) Resistance of textile fabrics to abrasion - inflated diaphragm method (Stoll Quartermaster - Universal Wear Tester)
Ford FLTM BN 108-02 - Resistance to abrasion - Taber abraser Resistance to Abrasion - Taber Abraser
Ford FLTM BN 108-02 - Resistance to abrasion - Taber abraser Resistance to Abrasion - Taber Abraser
Ford FLTM BN 108-03 - Resistance to pilling Resistance to pilling
Ford FLTM BN 108-04 - Resistance to scuffing Resistance to scuffing
Ford FLTM BN 108-07 - Resistance to snagging (Taber) Resistance to snagging of trim materials (Taber abraser)
Ford FLTM BN 108-07 - Resistance to snagging (Taber) Resistance to snagging of trim materials (Taber abraser)
Ford FLTM BN 108-11 - Resistance to snagging (Mace test) Resistance to snagging - Mace test
Ford FLTM BN 108-13 - Resistance to scratching Resistance to scratching
Ford FLTM BN 112-03 - Degree of soil transfer Degree of soil transfer to leather and polymeric fabric´s
Ford FLTM BN 112-08 - Soiling & cleanability test for interior trim materials. Soiling & cleanability test for interior trim materials.
Ford FLTM BN 112-08 - Soiling and cleanability Soiling and cleanability test for interior trim materials
Ford FLTM BN 112-08 - Soiling and cleanability Soiling and cleanability test for interior trim materials
Ford FLTM BN 112-08 - Soiling and cleanability Soiling & Cleanability Test for Interior Trim Materials
Ford FLTM BN 112-12 - Resistance to staining Resistance to Staining of seating farbrics
Ford FLTM BN 112-12 Methode A - Resistance to staining Resistance to Staining of seating farbric; Method A
Ford FLTM BN 112-12-A - Resistance to staining Resistance to Staining of seating farbrics; Method A
Ford FLTM BN 112-12-B - Resistance to staining Resistance to Staining of seating farbric; Method B
Ford FLTM BN 113-01 - Bond strength of trim assemblies Bond strength of trim assemblies
Ford FLTM BN 113-03 - Heat aging (constant tensile load) Extended heat ageing of polymeric coated fabrics (constant tensile load)
Ford FLTM BN 114-01 - Thickness measurement Thickness test for automotive textile materials
Ford FLTM BN 115-07 - Compression set Compression set of polyurethane foam
Ford FLTM BN 117-03-A - Tensile strength after ageing, retained Tensile Strength Evaluation of trim materials after accelerated exposure in a controlled irradiance water cooled xenon arc apparatus; Method A: Tensile strength after ageing, retained Tensile Strength (GT-Klemmen)
Ford FLTM BN 117-03-B - Surface Fiber Deterioration Evaluation of trim materials after accelerated exposure in a controlled irradiance water cooled xenon arc apparatus; Method B: surface fiber deterioration
Ford FLTM BN 119-01 - Seam strenght Determination of seam strength of textile trim materials
Ford FLTM BN 119-01 - Seam strength Determination of seam strength of textile trim materials
Ford FLTM BN 121-01 - Bond strength test Bond strength test - Interior trim decorations
Ford FLTM BN 151-01-A - Welded seam strength/ peeling force (original state) Bond strength of trim assemblies - Method A (Original peel bond strength)
Ford FLTM BN 151-01-B - Welded seam strength/ peeling force (after aging) Bond strength of trim assemblies - Method B (Peel bond strength after aging)
Ford FLTM BN 151-01-C - Welded seam strength/ peeling force (after humidity exposure) Bond strength of trim assemblies - Method C (Peel bond strength after humidity exposure)
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength
Ford FLTM BN 151-05 - Peel adhesion strength (180°) Determination of 180 degree peel adhesion strength of laminates
Ford FLTM BN 151-06 - Adhesion strenght (90°) Determination of 90° Adhason strength of interior materials to rigid or flexible substrates
Ford FLTM BN 153-1 - Liquid repellency test liquid repellency coating verification test
Ford FLTM BN 155-01 - Resistance to simulated finger tip abrasion Resistance to simulated finger tip abrasion (Abrex)
Ford FLTM BN 156-01 - Electrical resistance test (surface resistance) Electrical resistance test for textiles (surface resistance)
Ford FLTM BN 158-01 - Martindale abrasion test Martindale abrasion testing of textile fabrics
Ford FLTM BN 162-01 - Permanent folding (Bally Flex Test) Bally Flex Test for automotive seat cover materials
Ford FLTM BO 040-01, Procedure A - Short term environmental cycling Short and long term environmental testing
Ford FLTM BO 040-01, Procedure A - Short term environmental cycling (Heat, humidity and cold cycle) Änderung gegenüber Ausgabe 2016-07: zusätzliche Anforderung für Horizontale oder vertikale Teile auf oder oberhalb der Gurthöhe, speziell für Himmel und Dachkonsole 90 °C
Ford FLTM BO 040-01, Procedure B - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing/Sun load: Heat ageing
Ford FLTM BO 040-01, Procedure B - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing/Sun load: Heat storage
Ford FLTM BO 061-01 - Determination of tackiness Determination the tackiness of interior materials
Ford FLTM BO 101-05 - Fuel resistance Determination of fuel resistance of plastic parts
Ford FLTM BO 111-02 - Test for indentation and recovery Test for indentation and recovery
Ford FLTM BO 113-03 - Load deflection test Load deflection test
Ford FLTM BO 116-01 - Light fastness Resistance to interior weathering (Exposure of interior trim materials in a controlled irradiance water cooled xenon-arc apparatus)
Ford FLTM BO 116-01 - Light fastness Resistance to interior weathering (Exposure of interior trim materials in a controlled irradiance water cooled xenon-arc apparatus)
Ford FLTM BO 127-03 - Stress cracking test Stress cracking test for plastics
Ford FLTM BO 127-03 - Stress cracking test Stress cracking test for plastics
Ford FLTM BO 131-01 - Odor test Determination and assessment of odor from interior trim materials / components / assemblies
Ford FLTM BO 131-03 (Condition 1) - Interior Odor test Interior odor test (Condition 1, 23 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 3) - Interior Odor test Interior odor test (Condition 3, 80 °C)
Ford FLTM BO 131-03 (Condition 3) - Interior Odor test Interior odor test (condition 3: 2 h at 65 °C)
Ford FLTM BO 131-03 (Condition 4) - Odor Test Interior Odor test
Ford FLTM BO 131-03 (Variante 1) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Variante 2) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Variante 3) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 - Interior odor test Interior odor test
Ford FLTM BO 151-01-A - Ball drop test (rubber ball) Resistance to low temperature impact (Ball drop test); Method A: rubber ball
Ford FLTM BO 151-01-B - Ball drop test (steel ball) Resistance to low temperature impact (Ball drop test); Method B: steel ball
Ford FLTM BO 160-04-A - Resistance to high pressure cleaning operations Resistance of painted plastic parts to high pressure cleaning operations
Ford FLTM BO 162-01 - Scratch resistance Resistance to scratch and marring
Ford FLTM BO 163-01 - Denting test (Impact test) Denting test for Interior Parts with Metal Appliques
Ford FLTM BP 101-01 - Degradation by ozone Rubber - Degradation by ozone
Ford FLTM BQ 007-02 - Acid dissolution test for aluminium parts Acid dissulotion test for decorative aluminium parts
Ford FLTM BQ 104-07 - Climate cycle test Environmental Test Cycles (only procedures 1 to 6)
Ford FLTM BQ 104-07, Procedure 9 - Climate cycle test Environmental Test Cycles, procedure 9
Ford FLTM BU 101-06-A - Dynamic Shear Test Dynamic Shear Test of pressure sensitve tapes (Method A)
Ford FLTM BU 101-06-B - Static Shear Test Static Shear Test of pressure sensitve tapes (Method B)
Ford FLTM BU 112-02 / Method B - T-peel adhesion test Peel adhesion of pressure sensitive tapes - Method B - 180° or T-peel adhesion on component
Ford FLTM BZ 108-01 - Determination of volatile organic compounds 10L- Bag method test for measuring the emissions of volatile organic compounds from vehicle interior materials
Ford FLTM BZ 156-01-A (Photometry) - Determination of formaldehyde emission Determination of formaldehyde, aldehyde and ketone emissions from non metallic components, parts and materials in the vehicle interiors; Part A: Photometric determination of formaldehyde emission
Ford FLTM BZ 156-01-B (HPLC) - Determination of aldehyde and ketone emission Determination of formaldehyde, aldehyde and ketone emissions from non metallic components, parts and materials in the vehicle interiors; Part B: Determination of aldehyde and ketone emission by high performance liquid chromatography
Ford FLTM BZ 157-01 (VDA 277) - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors by Headspace Gas Chromatography (TVOC)
Ford IP-0105 / DVM-0038-IP - Sunload and heat age resistance Instrument panel - Sunload and heat age resistance (IR test: heat storage with infrared radiation)
Ford IP-0105 / DVM-0038-IP - Sunload and heat age resistance Instrument panel - Sunload and heat age resistance (IR test: heat storage with infrared radiation)
Ford IT-0815 (Ver. 10) / Ford DVM-0012-17 (Ver. 4) - Maximum Deflection & Rotation Interior Trim maximum Deflection & Rotation for Quality Feel
Ford MA-0015 / DVM-0027-MA / FLTM BO 127-03 (based on) - Stress cracking test Chemical compatibility (Stress cracking test for plastics)
Ford MA-0018 / DVM-0014-MA - Odour test Odour for seat belts
Ford OR-0329 (DVM-0048-OR) - Sunload resistance Sunload resistance - exterior Ornamentation / leafscreen (IR-Test)
Ford PA-0045 / DVM-0027-PA - Resistance to media Ford, Exterior topcoat solvent resistance / Exterior topcoat cure - solvent rub
Ford SH-0089 / SH-0103 - Coefficient of friction Modiefied throw-in-mat slippage test (static friction)
Ford TM 00.00-L-467 - Corrosion test Global Loboratory Accelerated Cyclic Corrosion Test
Ford WSB-M4D815-A - Polypropylene (PP) foam, closed cell Closed cell polypropylene foams produced by compression molding of expanded polypropylene beads (e.g. as fillers in low flex modulus bumper covers)
Ford WSK M2D416: Polyurethane (PUR) foam, molded high resilience
Ford WSK-M2D406-A; Polyurethane (PUR) Foam, Acoustic Grade
Ford WSK-M2D419-A § 3.4.5 - Cold flexibility Cellular Elastomer, Gasket; § 3.4.5: Cold flexibility
Ford WSK-M2D419-A § 3.4.9 / ABS (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (ABS) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.9 / PC (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (PC) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.9 / PMMA (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (PMMA) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A: Cellular Elastomer, Gasket Cellular elastomeric gasket based on natural or synthetic rubber
Ford WSK-M3G178-B1/B4: Tape, Decorative, Pressure Sensitive, Exterior Decorative tapes used for exterior applications, transparent or pigmented, which may be printed on the face side and may be covered with a durable clear protective coating and backed with a pressure sensitive adhesive which is protected by a release paper
Ford WSK-M4D556-A/A3/A4/A5: Polypropylene Copolymer, Mineral Filled
Ford WSK-M4D635-A2 - Acetal (POM) Copolymer, Melt flow rate 7 - 15 thermoplastic acetal copolymer based on trioxane with melt flow rates from 7 to 15 g/ 10 min for functional automotive applications
Ford WSK-M4D648-A2 - Polyamide (PA) 66, Heat stabilized molding compound, interior
Ford WSK-M4D649-A: Polyethylene (PE) Foam, Chemically Crosslinked, Closed Cell, 30 kg/m³ Closed cell, chemically crosslinked polyethylene foam with a nominal density of 30 kg/m³
Ford WSK-M4D665-A2: Polyamide (PA) 6, 15 % Glass Fiber Reinforced Molding Compound, Interior
Ford WSK-M4D819 - Polyethylene (PE) foam, physically cfosslinked, closed cell
Ford WSK-M98P5-A: Finished parts, plastics, interior Finished interior plastic parts consisting of various components and/or materials. These parts are generally used in the passenger compartment for application such as e.g. instrument panel coverings, glove box lids, pillar coverings etc.
Ford WSS M2D519-A1: Flexible coverstock, slush moldable thermoplastic elastomer (TPE), seamless instrument panel Slush molded TPE skin that is UV stabilized, heat stabilized with low temperature ductility
Ford WSS M4D985-A3: Flexible coverstock, slush moldable polyvinyl chloride (PVC) or polyvinyl chloride alloy, seamless instrument panel
Ford WSS M8P27-A1: Performance, Roof Systems Fabric, Interior For flexible (soft) cover fabric, or laminate, to be bonded to an interior roof system substrate base or interior part above the belt line. This includes applications such as headliner, pillar, sun visor, roller shade, and moon/sun roof.
Ford WSS M8P27-B1: Performance, Roof Systems Fabric, Interior For flexible (soft) cover fabric, or laminate, to be bonded to an interior roof system substrate base or interior part above the belt line. This includes applications such as headliner, pillar, sun visor, roller shade, and moon/sun roof.
Ford WSS M99P2222-C1 § 4.2 - Determination of formaldehyde / acraldehyde and acetaldehyde Performance, vehicle interior environment quality - C1: Component requirements; § 4.2: Formaldehyde / Acraldehyde and acetaldehyde after extraction according FLTM BZ 156-01by HPLC
Ford WSS M99P29-B: Performance, Energy Absorbing Foam, Interior foam materials used in energy absorbing bolsters and other interior trim components
Ford WSS M99P41-A10 to -A72: Label Performance all labels found in vehicles
Ford WSS M99P41-A10 to -A72: Label Performance all vehicle labels
Ford WSS M99P41-A10 to -A72: Label Performance for all Ford Motor Company vehicle labels
Ford WSS M99P41-A10 to -A72: Lable performance all vehicle labels
Ford WSS M99P48-A1/-A2/-A3/-A4: Foam Performance (Int., Ext., Underhood) / Sewn in or Lamination (Int.) / PSA Tape (Int., Ext., Clim. Control, Underhood) / PSA Tape (High Temp. Applic., Underhood) Foams and foam tapes made of various materials including polyurethane, polypropylene foam and pressure sensitive adhesive tapes
Ford WSS M99P48-A1/-A2/-A3: Foam Performance (Interior, Exterior, Underhood) / Sewn in or Laminierung (Interior) / Pressure Sensitive Adhesive (Interior, Exterior, Climate Control and Underhood) Foams and foam tapes made of various materials including polyurethane, polypropylene foam and pressure sensitive adhesive tapes
Ford WSS-M11P65-A: Tape, Performance, Pressure Sensitive, Two Sided, Interior and Exterior, Emblem, and Badges
Ford WSS-M15J14-A1/A2: Paint, two component color coat for plastic, interior, hard coat - A1: straight shade, A2 - metallic e.g. bezels, switches, buttons, console
Ford WSS-M15J14: Paint, two component color coat for plastic, interior e.g. switches, buttons, console
Ford WSS-M15J15-A1/A2: Paint, Two component color coat for plastic, Interior, Soft touch for airbags
Ford WSS-M15P20-B1/B2: Polymeric foam for seat applications For material used in all seat cushions and backs, armrests, head restraints, armrests, and other foam trim items related to seating construction.
Ford WSS-M15P20-B1/B2: Polymeric foam for seating application For material used in all seat cushions and backs, armrests, head restraints, armrests, and other foam trim items related to seating construction.
Ford WSS-M15P26-D: Performance, Armrest, Foam in Place Foam-in-place molded armrest assembly
Ford WSS-M15P27-F: Material Specification - Headlining formed Headlining formed
Ford WSS-M15P32-D: Trim assembly, enclosed luggage compartment covering Carpeted luggage or load compartment trim components where various materials are combined to provide a trim assembly having decorative and/or functional features
Ford WSS-M15P34-D: Performance, Interior Trim Components With Appliques Requirements for interior decorative trim components with multilayer construction. For components used on instrument panels and interior door trim panels. Including constructions of Wood, Film, Hydrographics and Aluminium
Ford WSS-M15P34-Draft: Performance, Interior Trim Components With Appliques Requirements for interior decorative trim components with multilayer construction. For components used on instrument panels and interior door trim panels. Including constructions of Wood, Film, Hydrographics and Aluminium
Ford WSS-M15P34-E: Performance, Interior Trim Components With Appliques equirements for interior decorative trim components with multilayer construction. For components used on instrument panels and interior door trim panels. Including constructions of Wood, Film, Hydrographics and Aluminium
Ford WSS-M15P34-E: Performance, Interior Trim Components With Appliques
Ford WSS-M15P4-E: Interior Trim, assembly performance specification For interior trim panels and moldings where various materilas are combined to provide a trim assemby decorative and/or functional features. For interior trim items such as door panel, center and overhead console, quarter panel, seat-back panel, A-, B-,C-, and D-pillar molding, hard instrument panels, all instrument panel components and garnish molding assemblies used in vehicles.
Ford WSS-M15P4-F: Assembly performance, hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-F: Assembly performance, hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-F: Assembly performance, hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-F: Assembly performance, Hard Mold-In-Color, Interior Components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-G: Assembly Performance, Hard Mold-in-color Interior Components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding
Ford WSS-M15P4-H: Assembly Performance, Hard Mold-in-Color Interior Components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding
Ford WSS-M15P4-H: Assemby performance, Hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P44-A - Throw in mat assemblies, carpeted
Ford WSS-M15P44-B: Performance, Throw In Mat Assemblies, Carpeted carpeted throw-in mat which consists of carpet and substrate material
Ford WSS-M15P44-B: Performance, Throw In Mat Assemblies, Carpeted carpeted throw-in mat which consists of carpet and substrate material
Ford WSS-M15P45-A: Performance, Instrument panel assembly, Flexible cover skin material For instrument panel assembly which utilizes a flexible cover skin material. Also for Tu-tone cover skin.
Ford WSS-M15P45-B: Performance, Instrument panel and soft interior components, Flexible cover skin material For instrument panel assembly, instrument panel component, floor console armrest, valence panel, hush panel, door panel or wrapped pillar, which utilizes a flexible (soft) cover skin material over a hard substrate with or without foam or spacer fabric, and with or without a topcoat.
Ford WSS-M15P45-C: Assembly Performance, Instrument Panel and Soft Interior Components, Flexible Cover Skin Material Instrument panel assembly, instrument panel component, floor console armrest, valence panel, steering wheel airbag cover, hush panel, door panel or wrapped pillar, which utilizes a flexible (soft) cover skin material over a hard substarte with or without foam or spacer fabric, and with or without a topcoat
Ford WSS-M15P45-C: Assembly Performance, Instrument Panel and Soft Interior Components, Flexible Cover Skin Material Instrument panel assembly, instrument panel component, floor console armrest, valence panel, steering wheel airbag cover, hush panel, door panel or wrapped pillar, which utilizes a flexible (soft) cover skin material over a hard substarte with or without foam or spacer fabric, and with or without a topcoat
Ford WSS-M15P48-A: Seat plastic component / assembly performance specification Durability and performance requirements of all visible and non visible plastic seat components where various materials are combined to provide a trim assembly having decorative and/or functional features
Ford WSS-M15P49-A1: Performance, Floor Mat Logos Floor mat logos fixed to carpeted floor mat substrates
Ford WSS-M15P50-C1/-C2: Performance, Plastic Components, C1 - Engine preconditioning, C2 - Underbody, Underhood, Engine Engine compartment and underbody plastic components
Ford WSS-M15P50-C1/-C2: Performance, Plastic Components, C1 - Engine preconditioning, C2 - Underbody, Underhood, Engine Engine compartment and underbody plastic components
Ford WSS-M15P51-A: Webbing, pull strap Rear seat pull straps
Ford WSS-M15P52-A: Performance, Instrument Cluster Assembly
Ford WSS-M16J9 § 3.6.5 - Light transmittance Ford WSS-M16J9-B: Paint, Basecoat/ Clearcoat over rigid substrates, Exterior § 3.6.5 Ultraviolet Light Transmittance
Ford WSS-M16J9-B: Paint, Basecoat/ Clearcoat over rigid substrates, Exterior
Ford WSS-M1F21-D1: Split grain leather, genuine, finished, steering wheel, shift knob and boot
Ford WSS-M1P83-E2 § 3.8 - Cyclic corrosion test with CASS salt spray test Decorative chrome electroplated part performance requirements, ABS or PC/ABS substrates, General exterior use, § 3.8 Cyclic corrosion test with CASS test acc. to ASTM B368
Ford WSS-M1P83-E2: Decorative Chrome Electroplated Part Performance Requirements, ABS or PC/ABS Substrates, General Exterior Use
Ford WSS-M21P42-A3: Fastener Finish S442, Zinc Rich Inorganic Basecoat,
Ford WSS-M2D504: Thermoplastic elastomer, styrene polyolefin block copolymer (TES)
Ford WSS-M2D507: Thermoplastic elastomer (TES), styrene block copolymer
Ford WSS-M2D510-A4/A9: Thermoplastic Elastomer, Olefinics (TEO), EPDM Modified Interior Applications Thermoplastic elastomer olefinics EPDM modifie with < 95 Shore A hardness, for visible automotive interior passenger and storage compartments applications
Ford WSS-M2F173-B1/-B2: Vinyl Film, (PVC), Unsupported (-B1)/ Bia-axial Orientation Type (-B2) Unsupported polymeric film used in soft interior components taht require a flexible (soft) cover skin material
Ford WSS-M2P158-A1: Printed graphics performance, plastic and painted substrates, Interior For printed graphic coatings printed directly on resins or other surfaces. It includes printed symbols and inks which have been painted over then subsequently laser etched to become visible. (Not applicable to continuous surface covered coatings.)
Ford WSS-M2P164-B: Paint performance, primed plastic parts, intermediate storage This specification defines performance requirements for primed plastic parts that are stored or shipped
Ford WSS-M2P177-C1/C2/C3: Paint Performance, Metal Substrates, C1 (Low Visibility, 4 Week resistance), C2 (Moderate Visibility, 6 Week Resistance), C3 (High Visibility, 9 Week Resistance)
Ford WSS-M2P180-C: Paint performance, rigid substrates, exterior This specification was released to define paint performance of exterior parts visible after assembly and is applicable to all surfaces outboard of the weatherstrip.
Ford WSS-M2P180-D: Paint performance, rigid substrates, exterior This specification was released to define paint performance of exterior parts visible after assemly and is applicable to all surfaces outboard of the weatherstrip. This specification is not intended for paint over chrome applications.
Ford WSS-M2P180-D: Paint performance, rigid substrates, exterior This specification was released to define paint performance of exterior parts visible after assemly and is applicable to all surfaces outboard of the weatherstrip. This specification is not intended for paint over chrome applications.
Ford WSS-M2P181-C: Paint Performance, Flexible Substrates, Exterior For exterior painted surfaces eg vehicle bumpers, claddings, bodyside moldings, and other parts visible after assembly.
Ford WSS-M2P181-C: Paint performance, flexible sustrates, exteriour This specification was released to define paint performance of exterior surfaces. It is specified for
Ford WSS-M2P188-A1: Paint performance, plastic substrates, interior Decorative coatings including paint, soft coating paint and pad printing on plastic substrates for interior use
Ford WSS-M2P188-B1: Paint performance, plastic substrates, interior Decorative coatings including paint, soft coating paint and interior scratch resistant coatings on plastic substrates for interior use
Ford WSS-M2P188-B1: Paint Performance, Plastic Substrates, Interior Decorative coatings including paint, soft coating paint and interior scratch resistant coatings on plastic substrates for interior use
Ford WSS-M2P190-A: Paint Performance, Interior Parts Metal Substrates Performance requirements for decorative coatings or finishes including paint, autophoretic, electrodeposition coating and powder coating on metal and metal plated substrates for interior use. Performance requirements for various interior applications such as seat tracks, towel bars, speaker grilles, brake pedals, and shift controls.
Ford WSS-M2P190-A: Paint Performance, Interior Parts Metal Substrates Decorative coatings or finishes including paint, autophoretic, electrodeposition coating and powder coating on metal and metal plated substrates for interior applications such as seat tracks, towel bars, speaker grilles, brake pedals, and shift controls.
Ford WSS-M2P191-A1: Coating performance, decorative finish, bright metal parts, interior For partially or fully coated interior parts made from chromium plated die castings, chromium plated steel or plastic, chromium flashed stainless steel, anodized aluminum and stainless steel.
Ford WSS-M3G168-B: Tape, Acrylic Foam, Pressure Sensitive Adhesive One Side, Heat Bondable Adhesive One Side Acrylic foam tape coated on one side with an acrylic pressure sensitive adhesive and coated on the other side with a heat bondable adhesive, protection by polyethylene release liners
Ford WSS-M4D1005-A1. Thermoplastic Polyolefin Elastomer (TPO), High Melt Flow, 22 % Mineral Filled, Molding Compound, Fascia / Thin-Walled Extreior
Ford WSS-M4D550-A12: Thermoplastic Polyolefin Elastomer (TPO), 20 % Talc Filled, Medium High Impact, Molded In Color, Interior
Ford WSS-M4D585-C1/C2: Polycarbonate/Acrylonitrile butadiene styrene blend (PC + ABS) high impact molding compound; - C2: polycarbonate/Acrylonitrile butadiene styrene blend (PC + ABS) molding compound For high impact thermoplastic molding compound based on a blend of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) for non-visible or painted applications.
Ford WSS-M4D638-D2: Polypropylene (PP) copoymer molding compound, mold-in-colour, low gloss, UV stabilized, high impact at cold For material used for interior door trim applications with airbags requiring excellent cold impact performance.
Ford WSS-M4D665-B2 - Polyamide (PA) 6, 15% Glass fiber reinforced molded in color, interior
Ford WSS-M4D670-B1/B2/B3/B4: Thermoplastic Polyolefin Elastomer, (TEO) Molding Compound, < 12 % Mineral Filled
Ford WSS-M4D690-B1: Acrylonitrile Butadiene Styrene (ABS), Molding Compound, High Heat Resistant, Interior
Ford WSS-M4D695-B1: Poylethylene (PE) High Density Molding Compound, Wasger Fluid Reservoir
Ford WSS-M4D729-A3: Polypropylene (PP) homopolymer, 20 % talc filled, injection molding compound, Interior For material used for interior center high mounted stop light (CHIMSL) housings.
Ford WSS-M4D729-B1 / WRS-M4D729-B2/B9: Poylpropylene (PP), 20 % Mineral Filled, Molding Compound 20 % mineral (talc) filled injection molding compounds based on polypropylene
Ford WSS-M4D827-C1: Acrylonitrile Butadiene Styrene (ABS), Molding Compound, Medium Heat Resistant, Interior
Ford WSS-M4D854-B1 / WRS-M4D854-B2/B3/B5: Polypropylene (PP), 30 % Glass Fiber Reinforced, Molding Compound Thermoplastic injection molding compound based on poylpropylene 30 % coupled glass fiber reinforced
Ford WSS-M4D924-B1: Polycarbonate/Acrylonitrile Butadiene Styrene Belnd (PC+ABS) Medium Impact Molding Compound, Interior Thermoplastic UV stabilized, medium impact molding compound based on a blend of PC and ABS for mold-in-color interior applications
Ford WSS-M4P13-A: Anodized Aluminum Performance, Decorative Exterior Trim Anodized aluminum for bright decorative trim components
Ford WSS-M8P16-B: Performance, Carpet, Floor and Trim For automotive quality carpet assemblies, for floor, door trim, seat backs in exposed load compartment applications and exposed load floors whether molded or otherwise fabricated.
Ford WSS-M8P16-B: Performance, Carpet, Floor and Trim For automotive quality carpet assemblies, for floor, door trim, seat backs in exposed load compartment applications and exposed load floors whether molded or otherwise fabricated.
Ford WSS-M8P18-B1/ B2/ B3/ B4: Engineering Material Specification - parts Interior trim fabrics for covering automotive seat cushions, seat backs and trim panels
Ford WSS-M8P3-E1/-E2/-E3: Performance, Flexible Polymeric Film, Interior Quality For materials used as interior trim coverings for seats, door panels, headlining and other applications.
Ford WSS-M8P3: Performance, Flexible polymeric film, Interior quality For interior trim coverings for seats, door panels, headlining and other applications.
Ford WSS-M98D39: Laminate, Thermoplastic Olefin (TPO) Skin, Cross-Linked Polyolefin Foam - A: Door Panel and Interior Trim Applications, -A2: Instrument Panel Application door panel and interior trim (A), instrument panel (A2)
Ford WSS-M98P13-E: Exterior Plastic Performance, Mold-In-Color Exterior mold-in-color plastic components
Ford WSS-M98P8-B1: interior plastic parts with sprayed flocking glove box inners
Ford WSS-M99P2222 - C1 Performance, Vehicle Interior Environment Quality - Component requirements For all products supplied to Ford and assembled into the cabin space and/or air conditioning system. Allergen requirements for all materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - C2 Performance, Vehicle Interior Environment Quality - Allergy testing and direct skin contact requirements All materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - D1: Performance, Vehicle Interior Environment Quality Component And Allergen Requirements For all products supplied to Ford and assembled into the cabin space and/or air conditioning system. Allergen requirements for all materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - F1/F2: Performance, Vehicle Interior Environment Quality - F1: Material Requirements; - F2: Material Allergy and Direct Skin Contact Requirements For all products supplied to Ford and assembled into the cabin space and/or air conditioning system. Allergen requirements for all materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - G1/F2: Performance, Vehicle Interior Environment Quality - G1: Material Level Requirements; - F2: Material Allergy and Direct Skin Contact Requirements G1 (China): for materials used in the components manufacturd and assembled for M1 vehicles (9 seats) manufactured and sold in China F2: for allergens and materials whith direct skin contact longer than 30 s
Ford WSS-M99P32-B § 3.7 - Moisture Absorption Performance, acoustical and thermal assemblies; § 3.7: Moisture Absorption
Ford WSS-M99P32-C: Performance , Acoustical and thermal assemblies interior, luggage compartment, engine compartment and underbody thermal and/or sound absorbing insulators
Ford WSS-M99P32-D1 - Performance, Acoustical and Insulators, Interior Assemblies all interior and luggage compartment sound absorption/insulation applications, where various materials are combined to provide an assembly having acoustical sound absorption/barrier/insulation and/or functional features
Ford WSS-M99P32-D6: Performance, Acoustical and Thermal Components and Assemblies for Engine, Underhood and Tunnel Applications insulators present in engine side dash, engine compartment foam gasket, tunel, underhood and sound absorption/insulation applications, where various materials are combined to provide assemblies having thermal, acoustical (sound absorption/barrier/insulation) and/or functional features; ultra high temperature parts exposed to heat from turbochargers, EGR systems and exhaust pipes
Ford WSS-M99P32-E1: Performance, acoustical and insulators, interior assemblies all interior, luggage compartment and climate control sound absorption/insulation applications, where various materials are combined to provide an assembly having acoustical sound absorption/barrier/insulation and/or functional features
Ford WSS-M99P32-E2/E3/E4/E5: Performance, Acoustical Wheel Arch/Well Liners, Heavy Duty Wheel Arch/Well Liners, Underbody/Engine Shields, Heavy Duty Underbody/Engine Shields Composite acoustical underbody and underbody/engine shields, including wheel arch/well liners, where various materials may be combined to provide acoustical (sound absorbtion/ barrier/ insulation) features; Light Weight Reinforced Thermoplastics (LWRT): PET nonwoven fabric, glass/PP fiber nonwoven fabric, glass/PP wet laid nonwoven composite
Ford WSS-M99P32-E6: Performance, Acoustical and Thermal Components and Assemblies for Engine, Underhood and Tunnel Applications insulators present in engine side dash, engine compartment foam gasket, tunel, underhood and sound absorption/insulation applications, where various materials are combined to provide assemblies having thermal, acoustical (sound absorption/barrier/insulation) and/or functional features; ultra high temperature parts exposed to heat from turbochargers, EGR systems and exhaust pipes
Ford WSS-M99P43-D: Performance, Genuine Leather Interior trim and seating leather, chrome or chrome free tanned leather
Ford WSS-M9P10-B § 3.6.2 - Environmental cycling test Glass run weather-strip, belt line (inner/outer) weather-strips, sun roof seals, and static fixed glass weather-strip performance specification § 3.6.2 Environmental cycling test
Ford WSS-M9P10-B: Glass run weather-strip, belt line (inner/outer) weather-strips, and static fixed glass weather-strips performance specification
Ford WSS-M9P10-B: Glass run weather-strip, belt line (inner/outer) weather-strips, and static fixed glass weather-strips performance specification
Ford WSS-M9P11-A / A2: Material specification - Throw in mat assemblies, Cargo/Trunk mats For all weather floor mats to protect the floor carpeting and cargo mats for trunk and load floor coverings.
Ford WSS-M9P8-C: Elastomeric Parts, Interior Perfomance
Ford WSS-M9P8-C: Elastomeric parts, interior performance For elastomeric parts in the passenger compartment.
Ford: Engineering Material Specification - WSS-M8P18-A1/ A2/ A3/ A4 - Parts Interior trim fabrics for covering automotive seat cushions, seat backs and trim panels
Ford: Engineering Material Specification - WSS-M8P18-A1/ A2/ A3/ A4 - Teile Interior trim fabrics for covering automotive seat cushions, seat backs and trim panels
Ford: WSS-M99P32-A - Performance, Acoustical and Thermal Assemblies For luggage compartment, engine compartment and underbody thermal and/or sound absorbing insulators.
Ford: WSS-M99P32-B - Performance, Acoustical and Thermal Assemblies This specification defines the minimum durability requirements of all thermal, foam gasket and sound absorption applications, where various materials are combined to provide an assembly having thermal and/or acoustical (sound absorption/barrier) and/or functional features. This includes passenger, loadspace, engine compartment and underbody thermal and/or acoustical (sound absorbing/barrier/ insulation) parts. Adhesive backed products must meet WSS-M11P62-A.
Forming pressure/Press capacity (acc. customers requirement) Forming pressure / Press capacity (acc. customers requirement)
Freightliner (DaimlerChrysler) 49-00039: Plate - chromium, decorative, plastics electroplated coatings of copper, nickel and chromium applied to plateable plastic substrates
Freightliner DaimlerChrysler 49-00039 § 4.7 - Cyclic corrosion test with CASS salt spray test Cyclic corrosion test with CASS test acc. to ASTM B368
Fuhrmann test - Copper sulfate test, potentiostatic Metallic coatings - Electroplated coatings of nickel plus chromium and copper plus nickel plus chromium on plastics materials - Annex C3: Fuhrmann test (crack density, pore density)
Fuji TS-345-05-011: Testing Method for Carpet
Fuji TS-YKB-009 § 6-4-1-7 (Xenon light) - Accelerated weather resistance test Floor Mat (Rubber Mat), § 6-4-1-7: Weather resistance
Fuji TS-YKB-009: Floor Mat (Rubber Mat)
Fuji TS345-05-011 § 4 Abrasion resistance - Abrasion resistance Testing method for carpet § 4 Abrasion resistance
Fuji TS371-00-004: Test Method of Extreior Parts - Quality Requirement
Fuji TS420-00-002 - burning behavior Flammability of interior parts