imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Gap measurement (DIN 1319) Fundamentals of metrology (several parts); Gap measurement
Gas chromatography with mass-detection Gas chromatography with mass-detection
GC Gas chromatography
GC-ECD GC-ECD
GC-FID GC-FID
GC-FID/MSD GC-FID/MSD
GC-MSD - Gas chromatography with mass selective detection GC-MSD
GC-MSD Determination (liquid injection) GC-MSD liquid injection
GM 9515 P (based on ASTM D4060) - Abrasion resistance by the Taber Abraser Method Abrasion resistance of organic coatings (Taber Abraser Method); Modification of ASTM D4060
GM Daewoo DS-T-7415 - Lightfastness Test Method for Determining color fastness to artificial light
GM Daewoo EDS-T-7602 - Burning behaviour Test method for flammability of interior materials
GM Daewoo EDS-T-7603 - Odor test Test Method for odor of interior materials
GM TM 912200: Fiberplastboard on the basis of wood pulp, bonded with synthetic resin low shaped parts, e.g. side panel trims, door trims, etc.
GM/Opel - GMW 14122 - Material Spezification Textiles - Plastic Roll Goods, PRG
GM/Opel GM 4486P - Ozone resistance Test for Ozone Resistance of Elastomer Compounds
GM/Opel GM 9070P - Flammability Procedure for testing flammability of materials
GM/Opel GM 9126P-A - Cleanability Test for Cleanability of Textiles and Plastics (Procedure A)
GM/Opel GM 9126P-B - Cleanability Test for Cleanability of Textiles and Plastics (Procedure B)
GM/Opel GM 9146P - Wicking Wicking of convertible top and roof trim materials
GM/Opel GM 9305P (Fogging F) - Determination of the fogging characteristics (Fogging F) Determination of Fogging Characteristics of Automotive Interior Trim Materials
GM/Opel GM 9505 P - Test Zyklus M - Dimensional stability cycle Automotive Environmental Cycles; Test cycle M - Dimensional stability cycle
GM/Opel GM 9507P - Thumbnail hardness test (scratch test) Thumbnail hardness test for painted parts
GM/Opel GM 9509P - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates
GM/Opel GM 9517P - Resistance to synthetic perspiration Resistance to synthetic perspiration
GM/Opel GM 9635P - Dust-Out Dust-out from Fiber sound absorber pad
GM/Opel GME 00002: General Requirements for Coloured Plastic Components for Exterior Use Coloured Plastic Components for Exterior Use
GM/Opel GME 00004: General Requirements for Integrally Coloured Plastic Components for Interior Use plastic components used for interior applications on automobiles, where colouring of the components is achieved by through pigmentation of the plastic itself.
GM/Opel GME 00211: Performance Requirements for Applied Paint Finish on Plastic Parts and Components for Interior Use Applied Paint Finish on Plastic Parts and Components
GM/Opel GME 14074 - Sunscreen and insect repellent resistance Sunscreen and insect repellent resistance
GM/Opel GME 60248 - Scraping Scraping of Coatings on Elastomers and Textile Interior Materials
GM/Opel GME 60251 - Ozone resistance Determination of the ozone resistance of elastomers
GM/Opel GME 60253 - Resistance to fuels The resistance of elastomers to fuels
GM/Opel GME 60255 - Resistance to liquids and greases Resistance of elastomers to liquids and greases
GM/Opel GME 60258 - Accelerated ageing test Accelerated ageing test for elastomers
GM/Opel GME 60259 - Cold resistance Cold resistance of elastomers
GM/Opel GME 60268 - Stone impact resistance Determination of resistance to stone impact of surface coatings, plastics and self adhesive films
GM/Opel GME 60269 - Abrasion resistance Test method for determining the abrasion resistance of metallized, painted, printed etc. plastic parts
GM/Opel GME 60271 - Determination of the release of formaldehyde Determination of the release of formaldehyde from moulded parts for the vehicle interior
GM/Opel GME 60276 - Odour Test method for determining the resistance to odour propagation of trim materials
GM/Opel GME 60286 - Determining the air permeability Test method for determining the air permeability of trim materials
GM/Opel GME 60288 - Martindale abrasion test Abrasion test for textile fabrics - Martindale abrasion test
GM/Opel GME 60292-1 (BST 115°C) - Colour Fastness and Resistance to Artificial Light Determination of colour fastness and resistance to artificial light; Coding 1: 115°C
GM/Opel GME 60292-2 (BST 100°C) - Colour Fastness and Resistance to Artificial Light Determination of colour fastness and resistance to artificial light; Coding 2: 100°C
GM/Opel GME 60301 - Weight per unit area Test method for determining weight per unit area
GM/Opel GME 60302 - Determining "softness" of trim materials Test method for determining "softness" of trim materials
GM/Opel GME 60303-1 - Thickness Test method for determining thickness of trim materials; Coding 1: Calliper equipment
GM/Opel GME 60303-2 - Thickness Test method for determining thickness of trim materials; Coding 2: Force gauge equipment
GM/Opel GME 60304 - Resistance to Spotting Test method for determining resistance to "Spotting" of trim materials by water and saline solution
GM/Opel GME 60305 - Stretch and permanent set characteristics Test method for determining the stretch and permanent set characteristics of textiles and leathercloths
GM/Opel GME 60315 - Peel resistance Determination of the resistance to peeling of adhered body trim materials
GM/Opel GME 60317 - Determination of thread count and thread density Determination of thread count and thread density of woven fabrics
GM/Opel GME 60318 - Peel resistance Test method for determining the resistance to peel of self-adhesive tapes and films
GM/Opel GME 60321 - Determining the proportions of vegetable fibres an rubbers Test method for determining the proportions of vegetable fibers and rubber upholstery materials
GM/Opel GME 60323 - Determination of weave density Determination of weave density of knitted fabrics
GM/Opel GME 60325 - Tensile properties Test method for determining tensile properties of body trim, sealing materials, deadeners etc.
GM/Opel GME 60329 - Determination of the resistance to thread tear-out Test method for determining the resistance to thread tear-out of trim materials
GM/Opel GME 60330 - Colour fastness to rubbing Test method for determining colour fastness to rubbing of textiles and coated fabrics
GM/Opel GME 60331 - Pilling resistance Test method for determining "pilling" resistance of upholstery materials
GM/Opel GME 60334 - Tear strength Test method for determining the tear strength of textiles and coated fabrics (single tear method)
GM/Opel GME 60335 - Laminate adhesive strength Test method for determining the laminate adhesive strength of leathercloths and other laminated trim materials
GM/Opel GME 60341 - Seam strength Test method for determining the seam strength of upholstery trim materials
GM/Opel GME 60344 - Determination of the surface resistance Test method for evaluating the electrostatic properties of upholstery materials by surface resistance measurements
GM/Opel GME 60345 - Resistance to wear - rotary abrasion test (Schopper) Test method for the determination of the resistance to wear of automotive trim materials (Rotary abrasion test - Schopper)
GM/Opel GME 60349 - Determination of cohesive strength Test method foe determining the cohesive strength of felts and similar materials
GM/Opel GME 60351 - Determination of moisture content, water absorption and thickness swell Test Method for determining moisture content, water absorption and thickness swell of fibreboards, chipboards, cardboard etc.
GM/Opel GME 60368 - Abrasion resistance Determination of abrasion resistance of artificial leather
GM/Opel GME 60400 - Resistance to abrasion Test method for determining the resistance to abrasion of organic coatings
GM/Opel GME 60401 - Cross hatch test Cross hatch test of organic coatings
GM/Opel GME 60402 - Scratch resistance (Erichsen hardness tester, model 318) Determining the scratch resistance of organic coating (Erichsen hardness tester, model 318)
GM/Opel GME 60403 - Resistance to colour change by fuel oil soot Resistance of organic coatings to colour change by fuel oil soot
GM/Opel GME 6867 - Accelerated ageing Accelerated ageing test for polymer safety parts
GM/Opel GME 8701 - Evaluation of frictional properties Evaluation of frictional properties of body equipment materials
GM/Opel GMI 60246-A - Determination of the compressibility of a cellular elastomer under a specified force Determination of the compressibility of a cellular elastomer under a specified force; Pressure foot type: A
GM/Opel GMI 60254 (without rework) - Compatibility of different materials Determination of compatibility of different materials in contact
GM/Opel GMI 60266 - Resistance to cleaning agents Determination of resistance to cleaning agents of automotive trim components
GM/Opel GMI 60267-1-C - Impact resistance (Steelball, after accelerated ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 1: after accelerated ageing and cooling to 23°C
GM/Opel GMI 60267-2-C - Impact resistance (Steelball, test at 23°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 2: test at 23°C
GM/Opel GMI 60267-3-C - Impact resistance (Steelball, after 4 h storage at -30°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 3: after 4 h storage at -30°C and test immediately after removal
GM/Opel GMI 60272 - Compatibility of PVC-materials with Amine Compatibility of PVC-interior trim materials with amines
GM/Opel GMI 60275 - Resistance to synthetic perspiration solution Determination of Resistance to Synthetic Perspiration Solution of Automotive Trim Components
GM/Opel GMI 60283-1 - Determination of apparent density Procedures of test for cellular and related materials - Part 1: Determination of apparent density
GM/Opel GMI 60283-2 - Tensile properties Procedures of test for cellular and related materials - Part 2: Determination of tensile stress-strain properties
GM/Opel GMI 60283-4 - Determination of compression set Procedures of test for cellular and related materials - Part 4: Determination of compression set
GM/Opel GMI 60283-5 - Humidity ageing (steam autoclave) Procedures of test for cellular and related materials - Part 5: Determination of resistance to humidity ageing
GM/Opel GMI 60283-8 - Determination of compression load deflection (40 % compression) Procedures of test for cellular and related materials - Part 8: Determination of compression load deflection (40 % compression)
GM/Opel GMI 60306 - Determining the Low Temperature Resistance Test method for determining the low temperature resistance of automotive trim materials
GM/Opel GMI 60307 - Determination of the temperature stability Test method for determining the temperature stability of automotive trim materials
GM/Opel GMI 60314 - Weight per unit area Test procedure for determining the weight per unit area of the backing of PVC-coated upholstery materials
GM/Opel GMI 60333 - Residue on Ignition Test method for determining the residue on ignition (ash) of polymeric materials
GM/Opel GMN 10033 - Sunscreen lotion resistance Sunscreen lotion resistance of interior coatings
GM/Opel GMW 14069-A - Migration - Bleeding resistance Migration - Bleeding resistance and contact stain compatibility of PVC with other materials; Method A: Bleeding resistance
GM/Opel GMW 14069-B - Migration - Contact stain compatibility Migration - Bleeding resistance and contact stain compatibility of PVC with other materials; Method B: Contact stain compatibility
GM/Opel GMW 14093-1-C - Impact resistance (Steelball, after accelerated ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 1: after accelerated ageing and cooling to 23°C
GM/Opel GMW 14093-2-C - Impact resistance (Steelball, test at 23°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 2: test at 23°C
GM/Opel GMW 14093-3-C - Impact resistance (Steelball, after 4 h storage at -30°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 3: after 4 h storage at -30°C and test immediately after removal
GM/Opel GMW 14093-C - Impact resistance (Steelball, after ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), ageing acc. to special requirements
GM/Opel GMW 14102 - Determination of Water Spotting Determination of water spotting test
GM/Opel GMW 14108 - Resistance to cracking from bending at cold temperature Resistance of materials to cracking from bending at cold temperature
GM/Opel GMW 14124 - Test cycle A - Moisture and cold cycle Automotive Environmental Cycles; Test cycle A: Moisture and cold cycle
GM/Opel GMW 14124 - Test cycle C - Exterior humidity thermal cycle Automotive Environmental Cycles; Test cycle C: Exterior humidity thermal cycle
GM/Opel GMW 14124 - Test cycle D - Interior humidity thermal cycle Automotive Environmental Cycles; Test cycle D: Interior humidity thermal cycle
GM/Opel GMW 14124 - Test cycle H - Dimensional Stability Test Cycle Automotive Environmental Cycles; Test cycle H: Dimensional stability test cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle P - Covered door panel delamination/dimensional stability cycle Automotive Environmental Cycles; Test cycle P: Covered door panel delamination/dimensional stability cycle
GM/Opel GMW 14124 - Test cycle P - Covered door panel delamination/dimensional stability cycle Automotive Environmental Cycles; Test cycle P: Covered door panel delamination/dimensional stability cycle
GM/Opel GMW 14124 - Test cycle Q - Aging condition for bond strength and hydrolytic stability of laminated textile materials Automotive Environmental Cycles; Test cycle Q: Ageing condition for bond strength and hydrolytic stability of laminated textile materials
GM/Opel GMW 14124 - Test cycle R - Shrinkage of upholstery materials used for wrapping instrument panels (IP) and rear window trim (RWT) Automotive Environmental Cycles; Test cycle R: Shrinkage of upholstery materials used for wrapping instrument panels (IP) and rear window trim (RWT)
GM/Opel GMW 14124 - Test cycle S - Accelerated aging of leather and plastic rolled goods Automotive Environmental Cycles; Test cycle S: Accelerated ageing of leather and plastic rolled goods
GM/Opel GMW 14124 - Test cycle T - Environmental simulation testing with autoclave Automotive Environmental Cycles; Test cycle T: Aging condition for bond strength and hydrolytic stability of laminated textiles materials (option to cycle Q)
GM/Opel GMW 14124 - Test cycle W - Interior adhesive/sealant humidity high temperature test cycle Automotive Environmental Cycles; Test cycle W: Interior adhesive/sealant humidity high temperature test cycle
GM/Opel GMW 14124 -Cycle W, revised acc. to GMW 14892 (2012) - Interior adhesive/sealant humidity high temperature test cycle Automotive Environmental Cycles; Test cycle W: Interior adhesive/sealant humidity high temperature test cycle / climate cycle revised according to GMW 14892, issue 2012-04 (Adhesion requirements for bonded interior parts)
GM/Opel GMW 14125 - Appendix B / Code A - Linear Abrasion Testing (with sraper) Linear Abrasion Testing - Test Scraper
GM/Opel GMW 14125 - Appendix C / Code B - Linear Abrasion Testing (with brush) Linear Abrasion Testing - Test Brush
GM/Opel GMW 14125 - Appendix G - Linear Abrasion Testing (with artificial buttock cover fabric) Linear Abrasion Testing - Test wedge with artificial buttock cover fabric (Appendix G)
GM/Opel GMW 14125 - Appendix H - Linear Abrasion Testing (with paper clip) Linear Abrasion Testing - Test wedge with paper clip (Appendix H)
GM/Opel GMW 14126 - Cold crack resistance Resistance to Cold Crack of Folded Materials
GM/Opel GMW 14127 - Impact Cold Crack Impact Cold Crack
GM/Opel GMW 14130 - Resistance to Marring or Scuffing Resistance to Marring or Scuffing
GM/Opel GMW 14131 - Compatibility with Amines Compatibility of Interior Trim Materials with Amines
GM/Opel GMW 14131 - Compatibility with Amines Compatibility of interior trim materials with amines
GM/Opel GMW 14132 - Resistance to Blocking Resistance to Blocking
GM/Opel GMW 14134 - Softness Softness (Leather)
GM/Opel GMW 14141 - Dye migration Dye Migration
GM/Opel GMW 14146 - Yarn Slippage Yarn Slippage
GM/Opel GMW 14148 - Resistance to Loop Pullout Resistance to Loop Pullout of Floor Carpet
GM/Opel GMW 14162-A - Colorfastness to Artificial Weathering; Method A Colorfastness to artificial weathering; Method A: Light and dark exposure cycle
GM/Opel GMW 14162-B - Colorfastness to Artificial Weathering; Method B Colorfastness to artificial weathering; Method B: Light only exposure cycle (100 °C BST)
GM/Opel GMW 14162-C - Colorfastness to Artificial Weathering; Method C Colorfastness to artificial weathering; Method C: Light only exposure cycle (115 °C BST)
GM/Opel GMW 14162-D - Colorfastness to Artificial Weathering; Method D Colorfastness to artificial weathering; Method D: Light and dark exposure cycle
GM/Opel GMW 14236 - Determination of the release of formaldehyde Determination of the release of formaldehyde from molded parts for the vehicle interior
GM/Opel GMW 14296 - Perspiration resistance Perspiration Resistance
GM/Opel GMW 14334 - Chemical resistance to fluids Chemical resistance to fluids
GM/Opel GMW 14334 - Code C (artifical perspiration ) - Chemical Resistance to Fluids Chemical Resistance to Fluids; Code C: Artifical perspiration solutions
GM/Opel GMW 14364 - Ingress/Egress/Jounce Seat Durability Test Test procedure interior - Ingress / egress / jounce seat durability test
GM/Opel GMW 14444 § 3.3.7 - Compatibility / migration staining Material related interior part performance; § 3.3.7: Compatibility / Migration Staining
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14445 - Sunscreen and Insect Repellent Resistance Sunscreen and insect repellent resistance
GM/Opel GMW 14458 - Copper-accelerated acetic acid salt spray test (CASS) Procedure for copper-accelerated acetic acid salt spray (CASS) test
GM/Opel GMW 14651: Material Related Interior Plastic Part Performance - Monolithic Plastic Parts and Injection Molded Plastic Substrates For plastic components and parts used for interior applications on automobiles. These are integrally colored monolithic plastic components and parts as well as plastic substrates materials for non-visible components and parts.
GM/Opel GMW 14668 § 3.2.3.1 - Substrate surface stress test (only for ABS) Minimum performance requirements for decorative chromium plated plastic parts; § 3.2.3.1: Substrate surface stress test (only for ABS)
GM/Opel GMW 14668 § 3.2.3.2 - Substrate surface stress test (only for ABS+PC) Minimum performance requirements for decorative chromium plated plastic parts; § 3.2.3.2: Substrate surface stress test (only for ABS+PC)
GM/Opel GMW 14671 § 4.7.1 - Oil resistance Organic coating performance for underhood and underbody components; § 4.7.1: Oil resistance
GM/Opel GMW 14671 § 4.7.3 - Resistance to battery acid Organic coating performance for underhood and underbody components; § 4.7.3: Resistance to battery acid
GM/Opel GMW 14688-A - Scratch resistance Scratch and mar resistance; Method A: Scratch resistance
GM/Opel GMW 14695 - Cohesive strength Determining the cohesive strength of felts and similar materials
GM/Opel GMW 14698-A - Scratch resistance (Erichsen hardness test rod type 318) Scratch resistance of organic coatings and self-adhesive foils; Method A: Erichsen Hardness Test Rod type 318
GM/Opel GMW 14698-A - Scratch resistance (Erichsen hardness test rod type 318) Scratch resistance of organic coatings and self-adhesive foils; Method A: Erichsen Hardness Test Rod type 318
GM/Opel GMW 14698-B - Scratch resistance Scratch resistance of organic coatings and self-adhesive foils; Method B: Rockwood five arm test device
GM/Opel GMW 14698-B - Scratch resistance Scratch resistance of organic coatings and self-adhesive foils; Method B: five arm test device
GM/Opel GMW 14729-A - High Humidity Test (water fog) Procedures for high humidity test; Option A: Water Fog
GM/Opel GMW 14729-B - High Humidity Test (wet bottom) Procedures for high humidity test; Option B: Wet bottom
GM/Opel GMW 14775 - Resistance to Snagging Resistance to Snagging of textile Materials
GM/Opel GMW 14777 - Determination of moisture content Test method for determining moisture content, water absorption and thickness swell of fiberboards, chipboards, cardboard, and similar rigid materials
GM/Opel GMW 14797: Painted Plastic Parts Performance Requirements This standard covers organic surface coatings on plastic parts and components used for automotive exterior and interior applications on motor vehicles, and also for painted components within the engine compartment.
GM/Opel GMW 14797: Painted Plastic Parts Performance Requirements For organic surface coatings on plastic parts and components used for automotive exterior and interior applications on motor vehicles, and also for painted components within the engine compartment.
GM/Opel GMW 14829 - Crosshatch test Tape Adhesion Test for Paint Finishes (Crosshatch test)
GM/Opel GMW 14829-A - Adhesion test for paint (Crosshatch) Tape Adhesion Test for Paint Finishes; Method A: Crosshatch test
GM/Opel GMW 14829-B - Adhesion test for paint (X-cut test) Tape Adhesion Test for Paint Finishes; Method B: X-cut test
GM/Opel GMW 14864 - Staining due to Sulfur Dioxide (SO2) and Hydrogen Sulfide (H2S) Procedure to determining the staining of trim materials due to sulfur dioxide, SO2 and hydrogen sulfide, H2S
GM/Opel GMW 14864 - Staining due to Sulfur Dioxide (SO2) and Hydrogen Sulfide (H2S) Procedure to determining the staining of trim materials due to sulfur dioxide, SO2 and hydrogen sulfide, H2S
GM/Opel GMW 14867 § 3.3 - Cure Test Performance requirements of paints on interior plastic substrates; § 3.3: Cure test
GM/Opel GMW 14867 § 3.6 - Effects of cleaners and lotions Performance requirements of paints on interior plastic substrates; § 3.6: Effects of cleaners and lotions
GM/Opel GMW 14867: Performance Requirements of Paints on Interior Plastic Substrates For Paints on Interior Plastic Substrates. Coatings can be applied to plastic substrates,flexible substrates, rigid substrates or integral skin foam systems.
GM/Opel GMW 14872 - Corrosion cycle test Cyclic Corrosion Laboratory Test
GM/Opel GMW 14872 - Cyclic corrosion laboratory test Cyclic corrosion laboratory test
GM/Opel GMW 14872 - Cyclic corrosion laboratory test Cyclic corrosion laboratory test
GM/Opel GMW 14885 § 4.4.13.2 - Accelerated Weathering Painted aluminium road wheels - Paint performance requirements; § 4.4.13.2: Accelerated weathering (Xenon-Arc-Test)
GM/Opel GMW 14892 § 3.1.5 - Peel strength Adhesion requirements for bonded interior parts; § 3.1.5: Peel strength
GM/Opel GMW 15377 - Staining and cleaning Staining and cleaning of leather and plastic roll goods
GM/Opel GMW 15432-A - Irradiation Testing Irradiation test; Code A: 3 cycles in radiation chamber (mit IR heaters)
GM/Opel GMW 15432-B - Irradiation Testing Irradiation test; Code B: 1 cycle in radiation chamber
GM/Opel GMW 15468: Hydrolytic Resistance of Polyamid to Coolants plastics
GM/Opel GMW 15634 - Determination of volatile and moderately volatile organic components Determination of volatile and semi-volatile organic compounds in materials of automotive interior
GM/Opel GMW 15634 - Evaluation acc. to GMW 3059 - Determination of volatile and moderately volatile organic components Determination of volatile and semi-volatile organic compounds in materials of automotive interior
GM/Opel GMW 15635 - Determination of aldehyde and ketone emissions Determination of Aldehyde and Ketone Emissions from Interior Materials
GM/Opel GMW 15651 - Hook Fastener Resistance Hook Fastener Resistance (Martindale method)
GM/Opel GMW 15793 - Ice Scraper damage test Window seals and moldings - Ice scraper damage test
GM/Opel GMW 15891 - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates, media resistance
GM/Opel GMW 16348: Functional, Non-visible, Interior Trim System Minimum Material - Performance Requirements For interior materials intended for non-visible applications e.g. air caps, stuffer foams, filler panels, srims, non-foam seat cushions, etc.
GM/Opel GMW 16526 - Water absorption Water absorption
GM/Opel GMW 16597: Carpet Materials for Non-Floor Applications - Material Specification For carpet materials that are suitable for non-floor applications, such as rear seat back, lower door trim, toe bar covers, trunk lining, load floor areas, lower instrument panels, and consoles.
GM/Opel GMW 3007 TM-60 / Draft (BST 100 °C) - Determination of Colour Fastness to Artificial Light Determination of Colour Fastness to Artificial Light; Code 2: 100 °C
GM/Opel GMW 3010 - Tensile properties Determination of Tensile and Elongation Properties
GM/Opel GMW 3016 - Organic Volatiles in Sealers and Adhesives Test for organic volatiles in sealers and adhesives
GM/Opel GMW 3154 - Mandrel bend test Mandrel Bend Test
GM/Opel GMW 3182 - Determination of Mass per Area Determination of Mass per Area
GM/Opel GMW 3205-A (70°C, with water) - Odour (Variant A) Determining the resistance to odor propagation of interior materials; Coding A: wet condition, 70 °C
GM/Opel GMW 3205-B (70°C, without water) - Odour (Variant B) Determining the resistance to odor propagation of interior materials; Coding B: Dry condition, 70 °C
GM/Opel GMW 3205-C (105°C, without water) - Odour (Variant C) Determining the resistance to odor propagation of interior materials; Coding C: Dry, high temperature condition, 105 °C
GM/Opel GMW 3208 - Rotary Abrasion Test, Taber Type Rotary Abrasion Test, Taber Type
GM/Opel GMW 3211 - Determination of static and permanent elongation Resistance to stretch and set
GM/Opel GMW 3217 - Ravel Resistance Ravel Resistance
GM/Opel GMW 3220 - Laminate Bond Strength Laminate Bond Strength
GM/Opel GMW 3221 (Code A) - Standard Conditioning Procedure for Standard Conditioning of Organic Materials; Code A: (22 ± 3) °C und (50 ± 5) % RH
GM/Opel GMW 3232 - after ageing - Burning behaviour Test method for determining the flammability of interior trim materials (after ageing)
GM/Opel GMW 3232 - received condition - Burning behaviour Test method for Determining the Flammability of Interior Trim Materials (as received)
GM/Opel GMW 3235-A - Fogging Characteristics of Trim Materials (Photometric Method) Fogging characteristics of trim materials; Method A: Photometric method (Fogging F)
GM/Opel GMW 3235-B - Fogging Characteristics of Trim Materials (Gravimetric Method) Fogging Characteristics of Trim Materials, Method B: Gravimetric Method (Fogging G)
GM/Opel GMW 3259 - Mildew resistance Mildew resistance
GM/Opel GMW 3274 - Pile distortion - Mechanical Pile distortion - Mechanical (abrasion)
GM/Opel GMW 3283 - Schopper abrasion wear test Schopper abrasion wear test
GM/Opel GMW 3286 - Neutral salt spray test (NSS test) Procedure for neutral salt spray test (NSS)
GM/Opel GMW 3326 - Tearing strength - Trapezoid Method Tearing strength of textile materials by trapezoid method
GM/Opel GMW 3347 - Lint pickup and retention Lint pickup and retention of textile materials
GM/Opel GMW 3387 - Determining fiber degradation Procedure for determining fiber degradation of automotive textiles (after exposure)
GM/Opel GMW 3390 - Procedure for determining the flexibility (Cantilever method) Procedure for determining the flexibility of automotive upholstery materials (Cantilever method)
GM/Opel GMW 3390 - Procedure for Determining the Flexibility (Procedure according to Cantilever) Procedure for determining the flexibility of automotive upholstery materials (Procedure according to Cantilever)
GM/Opel GMW 3402-A - Soil resistance Soil and cleaner resistance of automotive materials; Procedure A: Soil resistance
GM/Opel GMW 3402-B - Cleaner Resistance Soil and cleaner resistance of automotive materials; Procedure B: Cleaner resistance
GM/Opel GMW 3405 - Seam Fatigue Seam Fatigue for Automobile Textiles
GM/Opel GMW 4089 - Determination of laminate curl properties Procedure for determining laminate curl properties of foam laminated materials
GM/Opel GMW 4090 - Determination of weave and yarn count Determination of weave and yarn count
GM/Opel GMW 4141 - Pile distortion - Environmental Pile distortion - Environmental (heat and humidity)
GM/Opel GMW 4217 - Dimensional Stability Dimensional Stability
GM/Opel GMW 4217, dry - Dimensional Stability Dimensional Stability (dry)
GM/Opel GMW 4217, wet - Dimensional Stability Dimensional Stability (wet)
GM/Opel GMW 4726 - Water repellent properties (Spray test) Water repellent properties of automotive textiles
GM/Opel GMW 4749 - Pilling Characteristics Procedure for determining pilling characteristics of automobile textile materials
GM/Opel GMW 4750 - Color Read-Through Color read-through of automotive fabrics
GM/Opel GMW 6754-A - Determination of electrostatic behavior Determination of electrostatic behavior of automotive textiles; Method A: Electrostatic resistance
GM/Opel GMW 6992 - Visual evaluation Visual appearance assessment
GM/Opel GMW 8081 - Determination of organic emissions (TVOC) Static headspace GC-MS for interior materials, interior emissions, (TVOC, relative emission with headspace-technology)
GM/Opel TM 228400: Material Specifications Body Equipment Loop-pile carpet with fine-serrate structure
GM/Opel TM 589800: Engineering Material Specification - Polyurethane foam Polyurethane foam
GM/Opel: GMW 105015 - Elastic and Non-Elastic Cords and Straps Elastic cords surrounding mesh fabric map pockets or surrounding convenience nets in occupant area or trunks of the vehicle.
GMW 14129 Draft - Sewing Thread Sewing thread for automotive sewing applications
GMW 14194: Fibrous sound absorption materials sound absorbing materials
GMW 14231 - Materialspecification Textilien - Interior Trim Fabrics Interior trim fabrics made from fibrous textile materials that are knit, woven, non-woven, or non·conventional in structure. Also for covers laminated fabric constructions and synthetic suede. - Type A, covers fabrics used for seating and door lrim panels. - Type B, covers fabrics used for overhead (headliner, visor, and sunshade), pillar. windlace and rear window trim, - Type C, covers fabrics used for instrument panel coverings.
GMW 14357 (Humidity ageing / Autoclave > 100 °C) - Resistance to Humidity ageing Procedures of test for cellular and related materials - Determination of resistance to humidity ageing
GMW 14357 (Humidity ageing / in glass vessel < 100 °C) - Resistance to Humidity ageing For cellular and related materials: Determination of Resistance to Humidity ageing
GMW 14552 Wind management fabric Wind management fabric
GMW 14553 - Material Specification Textiles - Security Shade Fabric Security shade fabric / For fabrics used in rear cargo or window areas. Fabrics covered by this specification are made from fibrous textile materials that are knit or woven in structure.
GMW 14650: Performance requrements for exterior plastic parts mold-in-color, painted or hard coated exterior plastic parts
GMW 14668 - Material Specification - Minimum performance requirements for decorative chromium plated plastic parts For copper-nickel-chromium electroplated plastic parts, including assemblies.
GMW 14668 - Material Spezifikation Finish - Minimum performance requirements for decorative chromium plated plastic parts basic requirements for Copper-Nickel-Chromium electroplated parts, including assamblies
GMW 14668 Minimum performance reqirements for decorative chromium plated plastic parts basic requirements for copper-nickel-chromium electroplated plastic parts, including
GMW 14722: Material Spezification - Elastomeric Floor Mats Elastomeric Floor Mats
GMW 14892 § 3.4 (peel strength) - Adhesion Adhesion requirements for bonded interior parts - peel strength
GMW 14892 § 3.5 (visual) - Adhesion, visual evaluation Adhesion requirements for bonded interior parts - Adhesion, visual evaluation
GMW 15702 - Material Specification Plastics: Plastic Molding Compounds
GMW 15816 - Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored e.g. seal belt sleeves, key pads, mats
GMW 16214:Polypropylene expanded bead foam Typical applications include the following: bumper energy absorbers, knee bolsters.
GMW 16853: Comprehensive Standard for Overall Emission Testing of Interior Materials and Parts (Fogging, Odor, Emissions, Carbonyls, Amines For materials and parts in the vehicle interior (fogging, emissions, carbonyls, amines).
GMW 16853: General Specification - Comprehensive Standard for Overall Emission Testing of Interior Materials and Parts (Fogging, Odor, Emissions, Carbonyls, Amines)
GMW 3026: Material Specification - Carpet Materials for Floors and Floor Mats Carpet materials for floor applications and floor mats.
GMW 3232 - Flammability of Interior Trim Materials Burning behavior of Interior Trim Materials
GMW BS 97034-6 B - Soiling behavior and cleaning ability (martindale) Surface test of motor vehicle interior materials - Soiling behavior and cleaning ability B
Gulf Standard GS 98/1988 - Burning behaviour Motor vehicles flammability of interior materials and their testing methods