imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Haptics behaviour / touch test Haptics behaviour / touch test (e.g. DBL 7384 § 4.10)
Hardness/Grip test for padded materials General grip indentation measurement for padded materials
Heat retentivity Heat retentivity
Heat storage Heat storage
Heat storage with infrared irradiation Heat storage with infared irridiation
Heavy metals in acidic sweat extract (DIN EN ISO 105-E04) Heavy metals in acidic sweat extract
HES D 6501-06 § 3.5 - Pencil Scratch Hardness Test General test methods for coating § 3.5 Pencil Scratch Hardness Test
high precision snagging mace Equipment for Mace Snag device acc to VDA 230-220
HJ/T 400: Standard of the General Administration of State Environmental Protection of PeopleÀs Republic of China - Determination of Volatile Organic Compounds and Carbonyl Compounds in Cabin of Vehicles Whole vehicle - Cabins of Vehicles
HJ/T measurement cycle according HJ-T 400 - Determination of organic emissions organic emissions from vehicle interior measurements
Hole density
Honda - Cleanability Honda - Cleanability (e.g. Honda 8102Z-SLE-J000)
Honda 0096Z-TLA-A000 § 4.3 - Pencil Scratch Hardness Test The quality standard of coating on PP resin parts - Specification for ext parts - § 4.3 Film hardness
Honda 0096Z-TLA-A000: The quality standard of coating on PP resin parts - Specification for ext parts Automobile exterior parts molded by PP resin material
Honda 7060Z-TW1W-H000 § 4.7.1 - static deformation Sunshade Assy, Roll - Creep resistance - static deformation
Honda 7754Z-TZ5A-A000 § 6-21 - Odor test (Room temperatur) Wood Panel with open pore Finish Spezification for TZ5 - § 6.21 Odor
Honda 7754Z-TZ5A-A000 § 6.21 - Odor test (at 80 °C) Wood Panel with open pore Finish § 6.21
Honda 8102Z-SLE-J000: Fabric Test method Specification - For Seat Fabric For Seat Fabric in automotive
Honda 8350Z § 6-22 - Odor test Door/Side Lining General Specification, § 6-22 Odor test
Honda 8350Z § 6.21 - Odor test Door/Side Specification for General; § 6.21: Odor test
Honda 8350Z-TLA-0000: General Spezification for door/side lining
Honda 8360Z-TR0-A000: Specification for Carpet - floor and trunk mats floor mat materials for cabin and trunk room of automobiles
Honda 8373Z-TK8-A011-M1 § 6.13 - Odor Characteristics Sunshade assy specification; § 6.13: Odor Characteristics
Honda 8445Z-TGGA-A010-M1: Specification, RR Cargo Cover Assy RR Cargo Cover Assy
Honda 8460Z-TX6-0000 § 7-20 - Odor test Test method specification for Assy trunk interior parts; § 7-20: Odor test
Honda 8460Z-TX6-0000: Test method specification for assy trunk interior parts for the automobile trunk associated parts (carpet materials, bases with covering materials such as non-woven fabric, and injection parts)
Honda D 6507 § 4.13.1 - Light resistance with ultraviolet carbon-arc lamp General test methods for floor carpet; § 4.13.1: Light resistance with ultraviolet carbon-arc lamp
Honda D 6507 § 4.16.1 - Odor Properties (room temperature) General test methods for floor carpet; § 4.16.1: Odor properties - normal condition
Honda D 6507 § 4.16.2 - Odor Properties (at 80 °C) General test methods for floor carpet; § 4.16.2: Odor properties - at 80 °C
Honda DWG No. 0094Z-SNA-0000 - Determination of the VOC emission Specification for test method for VOC
Honda DWG No. 0094Z-T0A-0000 - VOC Test method VOC Test methods specification for interior parts
Honda DWG No. 0094Z-T7S-0000 - VOC Test Method VOC Test Method Specification for interior parts
Honda HES D 2016: Quality Standards for General Coating (on Metals)
Honda HES D 2500-10: General test methods of resin materials for vehicles For resin materials to be used for resin parts of vehicles (motorcycles and automobiles).
Honda HES D 6003 - Flammability Flammability test method for automobile interior materials
Honda HES D 6501-06 § 3.12 - Anti-Tackiness Test General test methods for coating; § 3.12: Anti-Tackiness Test
Honda HES D 6501-06 § 3.3 - Gloss General test methods for coating; § 3.3: Gloss
Honda HES D 6501-06 § 3.6 - Adhesion Test (cross cut test) General test methods for coating § 3.6 Adhesion Test (cross cut test)
Honda HES D 6506: General Test methods for Fabrics General test methods for fabrics (woven and knitted fabrics) used mainly for seat covering materials of motor vehicles.
Honda HES D 6508 (Method B - specular gloss) - Determination of fogging characteristics (Fogging F) Test method for fogging of interior materials for automobiles; Methode B: Method for measuring specular gloss (Fogging-F)
Honda HES D 6601-99A - Light resistance Accelerated test method for light resistance with xenon-arc lamp
Honda SMG 5460Z-SEA-0000 § 7.24 - Odor test Specification for assy trunk interior parts; §7.24: Odor strength
House method: Phenol & derivatives with GC/MSD House method: phenols and derivatives by GC / MSD
Hyundai / KIA - abrasion resistance, plane surfaces allg. Abriebfestigkeit für Hyundai-Prüfpläne
Hyundai MS 214-04: PC+ABS alloy Crash pad, interior trim etc.
Hyundai MS 343-11 § 4.14 - Crease Resistance Material specification - Crease Resistance
Hyundai/KIA - MS 210-05 - Material Specification for molded plastics to use in general performance of automotive interior parts
Hyundai/KIA KS M 6518 § 5 - Tensile test Physical test method for vulcanized rubber; § 5: Tensile test
Hyundai/KIA MS 200-08 - Migration staining Resistance of coated fabrics and plastic film to deterioration and migration staining
Hyundai/KIA MS 200-11 - Resistance to soil impregnation Soiling test for artificial leather and plastic sheet
Hyundai/KIA MS 200-38 § 4.3 - Heat cycle test with infrared irradiation Test Standard - Steering Wheel § 4.3 Heat Cycle Resistance Test
Hyundai/Kia MS 210-05 § 4.12 - Conduction resistance test (electrostatic behaviour) Molded plastic parts - Interior use; § 4.12: Conduction resistance test -electrostatic behaviour (based on)
Hyundai/KIA MS 210-05 § 4.3.1 - Heat cycle resistance test with infrared irradiation Molded plastic parts - Interior; § 4.3.1: Heat cycle resistance test
Hyundai/KIA MS 210-05 § 4.5 - Fading resistance test Molded plastic parts - Interior; § 4.5: Fading resistance test (Method: Xenon Arc - equipment according to ISO 105)
Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Interior use; § 4.7: Chemical resistance test
Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Interior; § 4.7: Chemical resistance test
Hyundai/KIA MS 210-05 § 4.8 - Wear resistance Molded plastic parts - Interior use; § 4.8: Wear resistance
Hyundai/KIA MS 210-05 § 4.9 - Scratch resistance Molded plastic parts - Interior use; § 4.9: Scratch resistance test
Hyundai/KIA MS 210-05: Molded Plastic Parts - Interior
Hyundai/KIA MS 210-06 § 4.4.2 - Weatherability test Molded plastic parts - Exterior use § 4.4.2 Artificial Weatherability test
Hyundai/KIA MS 211-47: PA66 Oil guide connector radiator inlet/outlet tank // Hydro engine mount nozzle
Hyundai/KIA MS 211-54: PA6, PA66 Wheel cover
Hyundai/KIA MS 213-42: Scratch Resistance PP Copolymer - Injection Molded Interior and Exterior Parts
Hyundai/KIA MS 252-08: Crosslinked Polyethylene Foam Sheet Pad of interior trim
Hyundai/KIA MS 256-31 § 5.2 - Peel strength Dash isolation pad assy; § 5.2: Peel strength
Hyundai/KIA MS 257-07: Soft Urethane Mold Foam - Seat Soft urethane mold foam (hereinafter called "mold foam") for use mainly in automotive cushion material
Hyundai/KIA MS 300-08 - Flammability resistance Flammability resistance - Interior materials
Hyundai/KIA MS 300-11 - Resistance to scuffing Method of testing resistance to scuffing of materials such as vinyl, genuine leather and luggage compartment mats
Hyundai/KIA MS 300-31 § 4.12.1/.2 - Fade resistance test (Xenon Arc) Standard Test Methods - Leather, A/Leather and Sheet § 4.12.1 + 4.12.2: Fastness Test
Hyundai/KIA MS 300-31 § 4.13 - Tackiness Standard Test Methods - Leather, A/Leather and Sheet § 4.13: Tackiness Free
Hyundai/KIA MS 300-31 § 4.19 - Abrasion resistance (Taber Abraser) Standard Test Methods - Leather, A/Leather and Sheet § 4.19: Abrasion Resistance
Hyundai/KIA MS 300-31 § 4.27 - Determination of the seam strength Standard Test Methods - Leather, A/Leather and Sheet § 4.27 Seam Strength
Hyundai/KIA MS 300-31 § 4.3 - Thickness Standard Test Methods - Leather, A/Leather and Sheet § 4.3: Thickness
Hyundai/KIA MS 300-32 § 4.14.1 - Fade Fastness Standard Test Method - Woven, Knit
Hyundai/KIA MS 300-32 § 4.9.1 - Seam strength
Hyundai/KIA MS 300-32: Standard test method - Woven, knit For woven fabric and knits for use mainly in automotive seat covers and interior trim skins.
Hyundai/KIA MS 300-34 - Odor test Test method of odor for interior materials
Hyundai/KIA MS 300-51 - Determination of grease content and pH value Test Methods Grease Content and pH for Genuine Leather
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC) Test method for the determination of the emissions of VOCs from vehicle interior parts
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC) Test method for the determination of the emissions of VOCs from vehicle interior parts
Hyundai/KIA MS 300-55 § 4.2 - Determination of Formaldehyde Test method for volatile organic compounds release; §4.2: Measurement of formaldehyde
Hyundai/KIA MS 300-55 § 4.4.2 - Organic substances and their emissions with TDS-GC-MSD Determination of volatile organic compounds from vehicle interior parts; §4.4.1: Determination of VOC and aldehydes from part using thermal desorption analysis method
Hyundai/KIA MS 300-57 - Determination of VOC emission in a 1 m_ testing chamber Test method for VOCs emission from part assembly
Hyundai/KIA MS 320-05: Fabrics for Seat Fabrics for automotive seat cover
Hyundai/KIA MS 322-05 § 3.5 - Tear strength Natural Leather - Laminated Soft Trim; Tear Strength
Hyundai/KIA MS 322-05 § 3.6 - Peeling strength Natural Leather - Laminated Soft Trim; Peeling strength
Hyundai/KIA MS 322-05 § 4.13.1 - Chemical Resistance - AbrasionTest Genuine Leather - Interior Trim; Chemical Resistance - AbrasionTest
Hyundai/KIA MS 322-05 § 4.13.2 - Chemical resistance - Drop test Genuine Leather - Interior Trim; Chemical resistance - Drop test
Hyundai/KIA MS 322-05 § 4.14 - Sunscreen lotion resistance Genuine Leather - Interior Trim; Sunscreen lotion resistance
Hyundai/KIA MS 322-05 § 4.15 - Resistance to water Genuine Leather - Interior Trim; Resistance to water
Hyundai/KIA MS 322-05 § 4.5 - Tear strength Genuine Leather - Interior Trim; Tear Strength
Hyundai/KIA MS 322-05 § 4.6 - Peeling strength Genuine Leather - Interior Trim; Peeling Strength
Hyundai/KIA MS 322-05: Genuine Leather - Interior Trim e.g. door trim, crash pad, console
Hyundai/KIA MS 322-05: Natural Leather - Laminated Soft Trim e.g. door trim, crash pad, console
Hyundai/KIA MS 322-06: Top grain leather - steering wheel & horn pad Genuine leather used for interior parts generally used for manufacturing a steering wheel and horn pad cover.
Hyundai/KIA MS 330-03: Cotton Mat - Seat Cotton mat for seat cushion and backing material for vehicle
Hyundai/KIA MS 652-12 § 5.4 - Scratch resistance test Soft feel painting - Interior plastic parts; § 5.4: Scratch resistance test
Hyundai/KIA MS 652-12: Soft Feel Painting - Interior Plastic Parts
Hyundai/KIA MS 652-14 § 5.23.1 - Abrasion resistance, Flat surface Painting - Hard thermoplastic parts; § 5.23.1: Abrasion resistance, flat surface
Hyundai/KIA MS 652-14: Painting - Hard thermoplastic parts
Hyundai/KIA MS 652-14: Painting - Hard thermoplastic parts
Hyundai/KIA MS 655-08 § 4.21.1 - Abraision resistance for flat surfaces Paint - hard thermoplastic parts; § 4.21.1: Abraision resistance for flat surfaces
Hyundai/KIA MS 655-08: Paint Hard Thermoplatic parts
Hyundai/KIA MS257-06: Urethane slab foam - Interior for use in cushion and lining material of seats
Hyundai/KIA MS322-04: Genuine leather - Seat covering applies to genuine leather used in automotive as seat covering
Hyundai/KIA Softening point - Determination of the softening point of laminates e.g. Hyundai/KIA MS 320-11 § 4.14, Hyundai/KIA MS 300-32 § 4.23.2