imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Jaguar Cars & Land Rover STJLR.50.5151 - Performance Requirements of Chrome Plated Polymers e.g. Substrates - Rigid and flexible polymer blends, ABS, ABS/PC, nylon Plastic parts intended for plating
Jaguar Cars & Land Rover STJLR.51.5021: Performance Requirements of Acoustical and Thermal Assemblies materials used as thermal and acoustical insulators in vehicl inetrior, luggage compartment, engine compartment and underbody applications
Jaguar Cars & Land Rover STJLR.51.5182: Performance Requirements of Labels All labels used for JLR vehicels
Jaguar Cars & Land Rover STJLR.51.5223: Temporary protection systems for trim components Temporary protection systems that are used to prevent handling damage during vehicle assembly, transit and transportation
Jaguar Cars & Land Rover STJLR.51.5229: Environmental Quality Requirements for interior materials and components For all surface materials on the interior of the vehicle with a surface area exceeding 100 cm_ (all colours).
Jaguar Cars & Land Rover STJLR.51.5229: Environmental Quality Requirements for interior materials and components For all surface materials on the interior of the vehicle with a surface area exceeding 100 cm_ (all colours).
Jaguar Cars & Land Rover STJLR.51.5241:Performance Requirements of Exterior Painted Parts for all exterior painted body and trim components
Jaguar Cars & Land Rover STJLR.51.5242 - Paint and Lacquer Performance - Interior For painted/lacquered interior trim materials (polymeric and metallic substrates). For painted (including soft painted, powder coated and lacquered) components used for automotive interior assemblies.
Jaguar Cars & Land Rover STJLR.51.5242: Paint and Lacquer Performance - Interior For painted/lacquered interior trim materials (polymeric and metallic substrates). For painted (including soft painted, powder coated and lacquered) components used for automotive interior assemblies.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262: Performance Requirements of Non-Decorated Plastics
Jaguar Cars & Land Rover STJLR.51.5281 - Material Performance - Polymeric Foils e.g. Seat facings, Seat backs,Door casings
Jaguar Cars & Land Rover STJLR.51.5281: Material Performance - Polymeric Foils e.g. seat facings, seat backs, door casings
Jaguar Cars & Land Rover STJLR.51.5361: Material Performance - Light Duty Fabrics Light duty trim fabrics for use on headlinings, pillar trims, sun visors
Jaguar Cars & Land Rover STJLR.51.5362: Material Performance - Heavy Duty Fabrics Heavy duty trim fabrics
Jaguar Cars & Land Rover STJLR.51.5381 - Lacquered Decorative Finished Interior Trim Components For decorative lacquered finishers and inmould foil decorated parts for interior trim applications.
Jaguar Cars & Land Rover STJLR.51.5381 - Lacquered Decorative Finished Interior Trim Components For decorative lacquered finishers and inmould foil decorated parts for interior trim applications.
Jaguar Cars & Land Rover STJLR.51.5381: Lacquered Decorative Finished Interior Trim Components (Veneers) For decorative lacquered finishers and in-mould foil decorated parts for interior trim applications
Jaguar Cars & Landrover STJLR 51.5225: Performance specification: interior trim assemblies For interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays.
Jaguar Cars & Landrover STJLR.51.5224:Instrument Panel Assembly Performance: Incorporating Flexible Cover Skin Material
Jaguar Cars & Landrover STJLR.51.5225 - Performance specification, interior trim assemblies for interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays
Jaguar Cars & Landrover STJLR.51.5225 - Performance specification, interior trim assemblies For interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays
Jaguar Cars & Landrover STJLR.51.5301 - Performance Requirements of Rubber Parts Rubber components and assemblies for use on the interior, exterior, and certain under-bonnet areas, e.g. weatherstrips, door seals, floor mats, grommets
Jaguar Cars & Landrover STJLR.51.5301 - Performance Requirements of Rubber Parts Rubber components and assemblies for use on the interior, exterior, and certain under-bonnet areas, e.g. weatherstrips, door seals, floor mats, grommets.
Jaguar Cars & Landrover STJLR.51.5301: Performance Requirements of Exterior & Interior Rubber Parts for components of certain engine bay components
Jaguar JNS 30.03.05 - Peel Strength Materials Tests - Peel Strength
Jaguar JNS 30.32.04 - Resistance to heat ageing Resistance to heat ageing - General
Jaguar JNS 30.60.08-A - Susceptibility to amine staining (Method A) Determination of susceptibility to Amine Staining, Method A (imitation leather )
Jaguar JNS 30.60.08-B - Susceptibility to amine staining (Method B) Determination of susceptibility to Amine Staining, Method B (foam)
Jaguar JNS 30.60.08-C - Susceptibility to amine staining (Method C) Determination of susceptibility to Amine Staining, Method C (foam and imitation leather combination )
Jaguar STJLR.51.5142: Material Performance - Seating Foams Seating foams (typically polyurethanes), including head restraints, cushions, bolsters, armrests
Jaguar STJLR.51.5181 - Self adhesive tape System Self Adhesive Tape Systems
Jaguar TPJLR 52.008 - Scratch Resistance Assessment of Scratch Performance - Crosshatch Method
Jaguar TPJLR 52.095 - Determination of VOC Emissions Determination of VOC Emissions - Small Bag Method
Jaguar TPJLR 52.457 - Resistance to fibre show through of perforated leather Resistance to fibre show through of perforated leather
Jaguar TPJLR 52.458 (VDA 270 Variant 2) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.458 (VDA 270 Variant 3) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.459 - Electrical Resistance Determination of the electrical resistance of Textile Fabrics
Jaguar TPJLR.52.010 - Mar resistance (Erichsen 430-PI Assessment of mar performance - gloss assessment method
Jaguar TPJLR.52.254 - Corrosion test Calcium Chloride Accelerated Corrosion Test (Russian Mud Test)
Jaguar TPJLR.52.422 - Deformation behavior (indentation and recovery) Determination of the Indentation and Recovery of Foam Parts
Jaguar TPJLR.52.425 - Trapezoid Tear Strength Trapezoid Tear Strength
Jaguar TPJLR.52.451 - Transparancy, translucence Fabric Transparency
JAMA measurement method - Determination of organic emissions organic emissions from vehicle interior measurements
JASO M 403 § 6.11.2.1 method A - Abrasion test (Taber) Test method for automotive seat trim fabrics; § 6.11.2: Frictional resistance (method A, taber abrasion)
JASO M 403 § 6.1 - Determination of mass per unit Test method for automotive seat trim fabrics; § 6.1: Mass per unit area
JASO M 403 § 6.10 - Resistance to rubbing Test method for automotive seat trim fabrics; § 6.10: Resistance to rubbing
JASO M 403 § 6.12.2.1 method A - Pilling (ICI-type tester) Test method for automotive seat trim fabrics; § 6.12: Pilling (method A, ICI-type tester)
JASO M 403 § 6.20 - Burning behaviour Test method for automotive seat trim fabrics; § 6.20: Inflammability
JASO M 403 § 6.3.2 - Tensile properties Test method for automotive seat trim fabrics; § 6.3.2: Tensile strength and elongation percentage
JASO M 403 § 6.4.2.2 method B - Tearing strength (trapezoid method) Test method for automotive seat trim fabrics; § 6.4.2: Tearing strength (Method B, trapezoid)
JASO M 403 § 6.5 - Static and permanent elongation Test method for automotive seat trim fabrics; § 6.5: static and permanent elongation
JASO M 403 § 6.6 - Determination of seaming strength Test method for automotive seat trim fabrics; § 6.6: seaming strength
JASO M 403 § 6.7 - Seam weariness Test method for automotive seat trim fabrics; § 6.7: seam weariness
JASO M902 - Determination of VOC emission Road vehicles - Interior parts and materials - Measurement methods of diffused volatile organic compounds (VOC)
JIS K 5600-4-3 - Visual comparison of colour Testing methods for paints - Part 4: Visual characteristics of film - Section 3: Visual comparison of the colour of paints
JIS K 5600-5-6 - Cross-cut test Testing methods for paints - Part 5: Mechanical property of film - Section 6: Adhesion test (Cross-cut test)
JIS K6251 - Tensile stress-strain properties Rubber, vulcanized or thermoplastic- Determination of tensile stress-strain properties
JIS L 0842 - Colour fastness to carbon arc lamp light Test methods for colour fastness to enclosed carbon arc lamp light
JIS L 0849 (Crockmeter) / DIN EN ISO 105-X12 - Colour fastness to rubbing Test methods for colour fastness to rubbing - Type I rubbing tester (crockmeter)