imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Mace Snag Test - Determination of the thread puller tendency (Mace Snag Test)
MAN 277 - Scratching with knife Adhesion test (scratching test)
MAN 321: Plastics - Acrylonitrile butadiene styrene (ABS) - Material delivery conditions High impact strength plastics
MAN M 3043: Curtain fabrics
MAN M 3044: Upholstery Fabrics
MAN M 3237: Thermoplastic elastomers TPE-S (Styrene-olefin block copolymers) - Material delivery conditions For thermoplastic elastomers with an elastomer phase based on styrene block copolymers.
MAN M 3516:General requirements for mechanical systems, Proof of functional and quality capability For testing the purely mechanical properties of components and systems for vehicles of MAN Truck & Bus AG (MTB).
MAN M 3524: Steering wheel cover made of PUR integral foam and leather Steering wheel cover
MAN M 3528: Surface resistance of polymeric materials in interior and exterior Plastic surfaces for interior and exterior (injected, uncoated, grained, laminated, back injected)
MAN M 3577 - Snag test Upholstery cover materials - Snag test
MAN M 3594: Burning behavior of materials Burning behavior (ignitability, burning rate and melting behavior) of interior trim materials and all insulation materials of N (truck), M2 and M3 motor vehicles (buses) installed in the engine compartment and in any separated heater compartment
MAN M 3594: Burning behaviour of materials Burning behavior (ignitability, burning rate and melting behavior) of interior trim materials and all insulation materials of N2 and N3 (truck), M2 and M3 motor vehicles (buses) installed in the engine compartment and in any separated heater compartment
MAN M 3657 - Cream resistance Surfaces in the vehicle interior - Cream resistance - Test instructions
MAN M 3683 - Soiling and cleaning behaviour Soiling and cleaning behaviour of plastic components in the vehicle interior - Test instruction
MAN M3228: Resistance to tropical conditions of materials for the interior fittings of commercial vehicles Resistance to tropical conditions of materials for the interior fittings of commercial vehicles, such as curtain materials, textile upholstery, trim parts, floor coverings, and similar items.
MAN M3658 - Hardness test (shore AO) Hardness testing- PUR integral foam - Steering wheel rim
Manual function control Manual function control
Manual function control under load General method - Manual function control under load
Mar resistance as per Oesterle - Scribing sensitivity Mar resistance
Mass balancing Mass balancing
Mass determination, weighing Mass determination, weighing
Mazda MES CF 050D - Burning behaviour Flammability of Interior parts
Mazda MES CF 055 B - Odor test Odor from cabin parts
Mazda MES MN 400X - Fabrics, Carpets, and Unwoven Fabrics For Automobiles Outer woven / knit fabrics mainly used for automobile seats and linings (referred to as "fabrics"), and pile carpets and felt-like unwoven fabrics mainly used for automobile floors and others (referred to as "carpets(s)" and "unwoven fabric(s)" respective
Mazda MES MN 405S § 7.18 - Dust adhesion and removability Dust adhesion and removability
Mazda MES MN 405S § 7.22.1 - Color fastness to wash / immersion Color fastness to wash
Mazda MES MN 405S § 7.22.2 - Stain resistance (water spotting) Stains
Mazda MES MN 405S § 7.23.1 A (Xenon arc) - Method a - Colour fastness to light (Xenon arc method) Xenon arc lamp equivalent to JIS B 7754
Mazda MES MN 405S § 7.9.1 - Seam strength Mazda - Determination of the seam strength
MBN 10494-6 § 5.9.1 - Artificial weathering - CAM 180 Artificial weathering - CAM 180
MBN 10529 Annex A.2 - TnP test Electroplating-Compatible Design of Plastic Interior Components - Annex A, Test for inner stress of the carrier parts; A.2 TnP test
MBN 15306-3 § 5.15 - Scratch resistance (against fingernail or knife blade) Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.15 Exposure to scratches
MBN 15306-3 § 5.16 - Heat resistance - folded exposure Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.16 Heat resistance - folded exposure
MBN 15306-3 § 5.21 - Coefficient of gliding/ sticking friction Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.21 Coefficient of friction
MBN 15306-4 § 5.2 / DIN EN ISO 11640 - Colour fastness (Veslic abrasion) Test methods for material systems and components - Part 4: resistance tests - § 5.2 Abrasion resistance to sun cream test substance - for leather Veslic as per DIN EN ISO 11640
MBN 161216 - Bending test Determination of bending properties of sandwich composites
MBN 55555-6 § 5.1 - Scratch resistance (against fingernail or knife blade) Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.1 Exposure to scratches
MBN 55555-6 § 5.10 - Coefficient of slding/ adhering friction Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.10 Coefficient of friction
MBN 55555-6 § 5.12 - Heat resistance - folded exposure Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.12 Heat resistance - folded exposure
MBN 55555-6 § 5.7 - Abrasion Abrasion resistance of the flock
McLaren MCL Q.S. 10: Paint Performance, Durability & Application Testing
McLaren MSL.03.05.0003: Door Trim test specification For door trim in the interior compartment
McLaren MSL.03.05.0004: Facia Test Specification Instrument Panel Assembly / For facia and facia console in the interior compartment.
McLaren MSL.03.05.0004: Facia Test Specification Instrument Panel Assembly / For facia and facia console in the interior compartment.
McLaren MSL.03.05.0011: Tunnel Console Test Specification Tunnel console in the interior compartment
McLaren MSL.03.05.0012: Lower Trim specification Lower Trim in the interior compartment
McLaren MSL.10.23.0007: Paint Performance, Durability & Application Testing Requirements for exterior paint
Melting temperature (VW, DSC) - Determination of melting behaviour (DSC) Melting temperature by DSC (dynamic scanning calorimetry)
Meteorological data; sampling Meteorological data at sampling
Method book BGK e.V. (RG) Self heating / grade of decompose
Microscopical analysis, procedure after Stratmann Textiles: microscopical analysis, procedure after Stratmann
Microscopy Microscopy
Migration staining Migration staining
Mikrotomschnitt
Mildew resistance - Storage in a desiccator Mildew resistance - General test method - Storage in a desiccator with water
Misuse Test Misuse Test
Mitsubishi - Odor - Odor test
Mitsubishi ES-W83217/ ES-X83217 § 4.12.2 - Carbon arc light resistance Fabrics and Sheets - Fade Resistance - Method B
Mitsubishi ES-X60410 - Flammability Flammability of interior materials
Mitsubishi ES-X83217 § 4.28 - Seam fatigue resistance Test standard - Polyvinyl chloride coated - Fabrics and polyvinyl chloride sheet - interior & exterior; § 4.28: Seam fatigue resistance
Mitsubishi ES-X83220 § 4.10 - Shift Strength Test standard - Woven fabrics, knittings; § 4.10: Shift strength
Mitsubishi ES-X83220 § 4.14.1A - Light Resistance Test Standard - Woven Fabrics, Knittings - Light Resistance (Xenon Arc Lamp)
Mitsubishi ES-X83238 § 3.8 - Heat sag Standard test method - Plastics elastomer for exterior; § 3.8: Heat sag
Mitsubishi ES-X83238: Standard Test Method - Plastics Elastomer for Exterior RIM and R-RIM urethane, olefine based thermoplastic elastomers, modified polypropylene for exterior parts
Mitsubishi ES-X83244: Standard Test Method - Molded Plastics (For Exterior Parts) Plastic parts for exterior applications
Mitsubishi ES-X83252 - VOC measuring method of interior materials VOC measuring method of interior materials
Modified oil staining test for Leather Modified oil staining test for Leather