imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
SAE J 913 - Resistance against fluorescein Test method for wicking of automotive fabrics and fibrous materials
SAE J1351 - Odor test Hot odor test for insulation materials
SAE J1351 - Odor Test Hot Odor Test for Insulation Materials
SAE J1352-A - Compression and Recovery Compression and Recovery of insulation paddings - Method A
SAE J1389 - Corrosion test Corrosion test for insulation materials
SAE J1530 § 3 - Abrasion with the Taber abraser method Test method for determining resistance to fiber loss, resistance to abrasion and bearding of automotive carpet materials; § 3: Taber abraser method
SAE J1530 § 4 - Abrasion resistance Test method for determining resistance to fiber loss, resistance to abrasion and bearding of automotive carpet materials; § 4: Abrasion resistance
SAE J1545 - Color difference measurement Instrumental color difference measurement for exterior finishes, textiles and colored trim
SAE J1756 (Fogging F) - Determination of the fogging characteristics (Fogging F) Determination of the fogging characteristics of interior automotive materials, photometric procedure (Fogging F)
SAE J1756 (Fogging G) - Determination of the fogging characteristics (Fogging G) Determination of the fogging characteristics of interior automotive materials, gravimetric procedure (Fogging G)
SAE J1767 - Colour difference measurement Instrumental color difference measurements for colorfastness of automotive interior trim materials
SAE J1847 - Abrasion resistance (Taber abraser) Abrasion resistance testing - Vehicle exterior graphics and pin striping (Taber abraser)
SAE J1885 - Light fastness (Interior) Accelerated exposure of automotive interior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J1960 - Light fastness (Exterior) Accelerated exposure of automotive exterior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J2412 - Light fastness (Interior) Accelerated exposure of automotive interior trim components using a controlled irradiance water cooled Xenon-arc apparatus (replacement of SAE J1885)
SAE J2412 - Light fastness (Interior) Accelerated exposure of automotive interior trim components using a controlled irradiance water cooled Xenon-arc apparatus (replacement of SAE J1885)
SAE J2527 - Light fastness (Exterior) Accelerated exposure of automotive exterior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J2635 - Filiform corrosion test Filiform corrosion test procedure for painted aluminum wheels and painted aluminum wheel trim
SAE J315: Fiberboard test procedure Determining the critical characteristics of basic or finished fiberboard products.
SAE J323-A - Cold cracking (Mandrel test) Test method for determining cold cracking of flexible plastic materials; Method A: Mandrel test
SAE J323-A - Cold cracking (Mandrel test) Test method for determining cold cracking of flexible plastic materials
SAE J365 - Resistance to scuffing Method of testing resistance to scuffing of trim materials
SAE J369 - Flammability Flammability of polymeric interior materials - Horizontal test method
SAE J400 - Chip resistance (gravelometer) Test for chip resistance of surface coating
SAE J855 - Static and permanent elongation Test method of stretch and set of textiles and plastics
SAE J860 - Determination Mass per unit area Surface Vehicle standard - Test Method for Measuring (Weight) of Organic Trim Materials
SAE J861 - Resistance to crocking Method of testing resistance to crocking of organic trim materials
SAE J883 - Dimensional Stability Test method for determining dimensional stability of automotive textile materials
SAE J948 § 3 - Abrasion resistance by the abrasion wheel method Test method for determining resistance to abrasion of automotive bodycloth, vinyl, and leather, and the snagging of automotive bodycloth; § 3: Taber method
Sample preparation (compression molding) Sample preparation (compression molding)
Sample preparation (cutting, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (cutting, E DIN ISO 23529) Rubber - General procedures for preparing and conditioning test pieces for physical test methods
Sample preparation (injection moulding) Sample preparation (injection moulding)
Sample preparation (manual) Sample preparation (manual)
Sample preparation (milling, DIN EN ISO 2818) Plastics - Preparation of test specimens by machining
Sample preparation (punching) Sample preparation (punching)
Sample preparation (punching, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (sawing, DIN EN ISO 2818) Plastics - Preparation of test specimens by machining
Sample preparation (splitting, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Saw cut test Saw cut test, e.g. VW TL 203, ASTM B 571
Scania STD 4377en - Scratch resistance Scratch resistance and scratch hardness
Scania STD4466: Burning behaviour of materials Materials used in the interior compartments and all insulation materials instaleld int he engine compartment and any separate heating compartment of motor vehicles in classes N3 (trucks) and M3 (buses)
Scania TB4087: Technical Regulation - Requirements for painted front surfaces in instrument
Scania TB4546 - Odour Smell - phenolic resin bonded material
Scanning electron microscopy
Scratch resistance (with thumbnail or knife blade) General method for determination of the scratch resistance (with thumbnail or knife blade)
Scratch test Scratch test (e.g. for PTL 5522, § 3.3.3; PTL 5536, § 5.4.1.3; VW TL 52447, § 2.2)
Scratch test with Erichsen hardness tester, model 318 - Scratch resistance Scratch resistance
Scratch test with Erichsen universal scratch tester - Scratch resistance / lattice cut Scratch test with Erichsen universal scratch tester
Scratch test with mar tester according to Oesterle Scratch resistance
Sealing / sealant removing Sealing / sealant removing
Seam Fatigue Test Seam Fatigue
Separation force (manual) Separation force (manual) - testing with hand load cell
Shift strength General method for determining the shift strength, e.g. Hyundai/KIA MS 300-32 § 4.10
SMG 7060Z-SMGA-E010-M1 / § 5.16 - Odor Characteristics Material and product characteristics of the roll-blind-sunshade for automobile; § 5.16: Odor characteristics
SMG 7060Z-SMGA-E010-M1 / § 5.4 - Colour fastness to light (89°C) Material and product characteristics of the roll-blind-sunshade for automobile; § 5.4: Light resistance (89 °C SST)
SMG 7060Z-SMGA-E010-M1 / § 5.9 - Water Spot Resistance Material and product characteristics of the roll-blind-sunshade for automobile; § 5.9: Water spot resistance
SN 195920 / SN 195921 - Agar diffusion plate test Textile fabrics - Determination of biologically active products (SN 19520), Determination of the antimycotic activity (SN 19521) - Agar diffusion plate test
SNV 195651 - Odor test Textiles - Determination of odor development of equipment (assessment)
Soda/Potash pulping Fusion procedure for following determination of anions/cations; soda/potash fusions
Soiling & cleanability behaviour textiles based on DBL 5399 Soiling & cleanability behaviour of textiles (based on DBL 5399.30)
Soiling and cleaning behavior (manually) Soiling and cleaning behavior (manually)
Soiling and cleaning behavior (Martindale) Soiling and cleaning behavior (Martindale)
Soluble contents from a watery extract Soluble contents from a watery extract
Specimen preparation; machined milling Specimen preparation; machined milling
St Andrews cross with adhesive tape pull-off St Andrews cross with adhesive tape pull-off
Static load (Shear tensile test) General test method - Static load freely suspended (Shear tensile test), e.g. BMW PR 380.4 issue 2015-09 § 2.2.5.2
Static solidity test (tensile test) general method - Static solidity test (tensile test) - component test
Steam jet test Steam jet test, e.g. for PTL 5524, VW 96172 § 7.6, PTL 5525, VW 96173 § 7.7, PTL 7520, VW 96208 § 5.12 / BMW PR 388 / BMW PR 387.1 / DBL 7381 / GMW 14797 table A1A
Storage in Autoclave Storage in Autoclave
Storage in sealant Storage in sealant
Storage in sealant remover Storage in sealant remover
Storage in test medium Storage in test medium
Storage in water Storage in water
Strength test (tensile test on the component) general test method - Strength test (tensile test on components)
Sun simulation (Cycling test) Ageing of automobile components and vehicle in Solar Simulation Units (Cycling test)
Surface balancing Surface balancing
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2405 - Odour test Odor Sensory Evaluation
Suzuki SES N 2405: Odor Sensory Evaluation / Suzuki SES N 2403: Standard for Control of Volatile Organic Compounds Emission Vehicle interior parts and materials having the surface area of more than 400 cm_
Suzuki SES N 3243: Painting Quality of Plastic Parts Paint films painted on surfaces of plastic parts
Suzuki SES N 3243: Painting Quality of Plastic Parts Paint films painted on surfaces of plastic parts
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3246: Evaluation and Quality for Carpet Materials and Mat Materials Carpet and Mat to be used for automobiles
Suzuki SES N 3247 § 4.17 - Seam strength Test method and quality criteria of leather for automobile seat; §4.17: Seam strength
Suzuki SES N 3247 § 4.18 - Seam fatigue Test method and quality criteria of leather for automobile seat; §4.18: Seam fatigue
Suzuki SES N 3247 § 4.6 - Crease-flex resistance Test method and quality criteria of leather for automobile seat; §4.6: Crease-flex resistance
Suzuki SES N 3253 - Corrosiveness textile materials Test Method of Textile Material Parts Corrosiveness
Suzuki SES N 3291: Test Methods for Plastic Material
Suzuki SES N 3291a: Testing Method for Plastic Materials
Suzuki SES N 3293/3292 (WAL-1) - Light fastness, interior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated light resistance test with carbon arc lamp (WAL-1)
Suzuki SES N 3293/3292 (WAL-2) - Light fastness, interior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated light resistance test with xenon arc lamp (WAL-2)
Suzuki SES N 3293/3292 (WAN-1) - Light fastness, exterior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated weatherability test with carbon arc lamp (WAN-1)
Suzuki SES N 3293/3292 (WAN-2) - Light fastness, exterior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated weatherability test with xenon arc lamp (WAN-2)
Suzuki SES N 3294 § 5.10 - Abrasion resistance Test method of surface sheet material for automobile seats; § 5.10: Friction strength (Taber«s abrasion resistance test)
Suzuki SES N 3294 § 5.11 - Pilling resistance (ICI) Test method of surface sheet material for automobile seats; § 5.11: Pilling resistance (ICI type test method)
Suzuki SES N 3294 § 5.12 (JASO M 346) - Lightfastness Test method of surface sheet material for automobile seats; § 5.12: Color fastness to light
Suzuki SES N 3294 § 5.15 - Mace Snag Test Test method of surface sheet material for automobile seats; § 5.15: Snag (ICI type mace testing method)
Suzuki SES N 3294 § 5.6 - Seam strength Test method of surface sheet material for automobile seats; § 5.6: Seam strength
Suzuki SES N 3294 § 5.7 - Seam Fatigue Test method of surface sheet material for automobile seats; § 5.7: Seam Fatigue
Suzuki SES N 3294 § 5.9 - Crumpling resistance Test method of surface sheet material for automobile seats; § 5.9: Crumpling resistance
Suzuki SES N 3298 § 4.11 - Stickiness Methods of testing PVC leather for seat skin § 4.11 Stickiness
Suzuki SES N 3298 § 4.12 - weight loss due to volatilization Methods of testing PVC leather for seat skin § 4.12 Loss by volatilization
Suzuki SES N 3298 § 4.16 - Anti-hydrogen-sulfide property Methods of testing PVC leather for seat skin; § 4.16: Hydrogen-sulfide property
Suzuki SES N 3298 § 4.22 - Seam strength Methods of testing PVC leather for seat skin; § 4.22 Seam strength
Suzuki SES N 3298 § 4.23 - Seam fatigue Methods of testing PVC leather for seat skin; § 4.23 Seam fatigue
Suzuki SES N 3298 § 4.9 - Color fastness to light Methods of testing PVC Leather for seat skin § 4.9 Color fastness to light
Suzuki SES N 3298: Methods of testing PVC leather for seat skin PVC leather used for the surface portion of interior car seats