imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Vacuum drying Vacuum drying
VDA 230-206 Part 2 - Stick-slip behaviour (Leather) Examination of the stick-slip behaviour of material pairs - Part 2 Leather
VDA 230-206 Part 3 - Stick-slip-behavior (plastic web) Examination of the stick-slip-behavior of testing of material pairs - Part 3: Plastic web
VDA 230-208 (Draft) - Hydrolysis weathering Leather and plastic sheeting for vehicle interior trim - Hydrolysis ageing (Storage in desiccator or preserving jar)
VDA 230-208 - Hydrolytic resistance Leather and plastic roll stock for motor vehicle interior trim - Hydrolytic aging (aging in desiccator or preserving jar)
VDA 230-209 - Flexural properties Leather, plastic roll stock and textiles for motor vehicle - Determination of flexural properties
VDA 230-210 - Hook and loop fastener test Upholstery fabric - Hook and loop fastener test
VDA 230-211 - Abrasion Test Abrasion Test on Leather - Determination of the abrasion resistance of leather surfaces using the Martindale abrasion testing apparatus and a ball plate
VDA 230-212 - Soiling and cleanability (modified Martindale method) Leather, plastic roll stock and textiles for use in vehicles - Determining the soiling and cleaning properties process - procedure soiled fabric
VDA 230-218 - Scratch resistance with a chisel Plastic sheet products for automobile interior trim - testing the scratch resistance - plowing
VDA 230-219-D - Sun simulation (long term testing) Ageing of automotive components in solar simulation units (long term testing)
VDA 230-219-Z - sun simulation (cycle testing) Ageing of automotive components in solar simulation units (cycle testing)
VDA 230-220 test with seam in the middle - Mace Snag Test

Textiles for the automotive interiors - Determining the thread puller tendency of textiles - Mace Snag test; § 8.1: Test without test seam in the middle

VDA 230-220 test without seam in the middle - Mace Snag Test Textiles for the automotive interiors - Determining the thread puller tendency of textiles - Mace Snag test; § 8.1: Test without test seam in the middle
VDA 237-101 (appendix 1) - Handle impression distance measurement Test procedures for foils and artificial leather; Appendix 1: Grip indentation measurement
VDA 237-101 (appendix 3) - Ball drop test Test procedures for foils and artificial leather; Appendix 3: Ball drop test
VDA 270 (Variant 1) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 1)
VDA 270 (Variant 2) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 2)
VDA 270 (Variant 3) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 3)
VDA 275 (HPLC) - Determination of the emission of selected analytes by the flask method Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method; measurement with HPLC
VDA 275 - Determination of formaldehyde emission Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method
VDA 276-1 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet; Teil 1: Standard emission test
VDA 276-2 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet; Part 2: Determination of emissions of Formaldehyde, ammonia and phenols after the equilibrium concentration method
VDA 276-3 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet; Part 3: Determination of total concentration of hydrocarbon compounds with a flame ionization detector (FID)
VDA 277 - Determination of emission of organic compounds (TVOC with GC-FID) Non-metallic materials for automotive interior trim - Determination of emissions of volatile organic compounds (TVOC, HS-FID-value)
VDA 277-MS/FID - Determination of volatile organic compounds (TVOC with GC-MS/FID) Non-metallic materials for automotive interior trim - Determination of emissions of volatile organic compounds (TVOC-MS)
VDA 278 (BMW) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC and FOG-determination TDS-GC-MS screening)
VDA 278 (Daimler) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (TDS-GC-MSD (2x VOC- + Fog-values))
VDA 278 (Porsche) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (emission measurement using TDS-GC-MSD)
VDA 278 (Sabic, 1x) - Organic emissions using thermal desorption-GC-MSD Thermal Desorption Analaysis of Organic Emissions for the Characterization of Non-Metallic Materials for Automobiles TDS-GC-MSD
VDA 278 - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles
VDA 278, based on - Organic substances and their emissions with TDS-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC- and FOG-Determination TDS-GC-MS-Screening)
VDA 280-1 - Colour measuring of plastic surfaces Colorimetry for motor vehicles - Colour measuring of plastic surfaces of interior materials for motor vehicles
VDA 280-3 - Color measurement of automotive finishes, uni-paint Colorimetry for motor vehicles - Color measurement of automotive finishes, uni-paint
VDA 621-402 - Salt spray fog test Technical paint tests - Salt spray test on paints and similar coatings
VDA 621-408 - Colour changes by simulated oil-soot exposure Technical paint tests - Examination of paints to colour changes by simulated oil-soot exposure
VDA 621-412 - Resistance to chemicals Technical paint tests - Chemical restistance of motor vehicle painting
VDA 621-415 - Corrosion test Technical paint tests - Examination of the corrosion protection of automotive coatings in cyclic alternating stress
VDA 621-424 (dry) - Abrasion resistance (dry) Technical paint tests - Abrasion resistance of coatings on plastics of motor vehicle interior trim (dry)
VDA 621-424 (test media, BMW) - Abrasion resistance (test media, BMW) Technical paint tests - Abrasion resistance of coatings on plastics of motor vehicle interior trim (test media, BMW)
VDA 621-427 - Stone chip resistance Stone impact resistance
VDA 675106 (DIN 53479-A) - Determination of density Elastomer components in automotive - Test methods for identification - Density (immersion method; DIN 53 497, Procedure A)
VDA 675116 - Differential scanning calorimetry (DSC) Elastomer components in automotive - Test methods for identification - Coldness characteristics, differential scanning calorimetry (DSC)
VDA 675125 - Determination of extractable components Elastomer components in automotive - Test methods for identification - Extractable components, extraction with Cyclohexane/Acetone
VDA 675130 (950°C) - Determination of the ash content Elastomer components in automotive - Test methods for identification - Ash content without chemical treatment (950 °C)
VDA 675135 - Thermogravimetrical analysis (TGA) Elastomer components in automotive - Test methods for identification - Thermogravimetry, TGA
VDA 675140 - Pyrolysis IR Elastomer components in automotive - Test methods for identification - Infrared spectroscopy analysis (IR), pyrolysis-IR
VDA 675202 (Shore A) - Determination of Shore A hardness Elastomer components in automotive - Test methods for determination of characteristics - Shore A, refers to DIN 53505
VDA 675205 - Tensile properties Elastomer components in automotive - Test methods for determination of characteristics - Tensile stress-strain properties - Tensile test
VDA 675210 (DIN 53515) - Tear strength test (according to Graves) Elastomer components in automotive - Test methods for property determination - Tensile stress-strain properties - Tear strength (Graves), refers to DIN 53 515
VDA 675211 (DIN 53507) - Tear strength test (strip specimen) Elastomer components in automotive - Test methods for property determination - Tensile stress-strain properties - Tear strength test (strip specimen), refers to DIN 53 507
VDA 675216-A - Compression set (Method A: cooling in non-deformed state) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Compression set; Method A
VDA 675216-B - Compression set (Method B: cooling in deformed state) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Compression set; Method B
VDA 675217-A - Tension set (Method A: release directly after heat storage, return measurement after 30 min) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Tension set; Method A
VDA 675217-B - Tension set (Method B: release 30 to 120 min after heat storage, return measurement after 30 min) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Tension set; Method B
VDA 675218 - Determination of the plastic and elastic deformation Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Plastic und elastic deformation (permanent deformation)
VDA 675241 - Corrosion effect on copper Elastomer components in automotive - Test methods for determination of characteristics - Corrosion effect on copper
VDA 675242-A - Paint indifference, method A: contact discoloration and environment discoloration due to migration Elastomer components in automotive - Test methods for determination of characteristics - Discolouration of organic materials by means of elastomers (Lacquer indifference), method A: contact discolouration and discolouration due to migration
VDA 675242-B - Paint indifference, method B: washout effect Elastomer components in automotive - Test methods for determination of characteristics - Discolouration of organic materials by elastomers (lacquer indifference), method B: wash-out effect
VDA 675301 - Exposure to test oils Elastomer components in automotive - Test method for durability test - Exposure to test oils
VDA 675310 - Heat ageing Elastomer components in automotive - Test method for durability test - Heat ageing
VDA 675311 (DIN 53509-1) - Ozon resistance after 20 % elongation Elastomer components in automotive - Test method for durability test - Effect of ozon (following DIN 53 509)
VDA 75202 (based on, BST 90 °C) - Colour fastness and ageing behaviour to light Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Based on: BST 90 °C
VDA 75202-A - Colour fastness and ageing behaviour to light (100 °C) Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Exposure condition A: 100 °C
VDA 75202-B - Colour fastness and ageing behaviour to light (115 °C) Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Exposure condition A: 115 °C
VDA automotive testing (emissions)
VDI 2464 / VDI 4300-2 / VDI 4300-4 / VDI 4301-3 - Sampling for PCB & PCP Sampling for PCB & PCP / lindane, indoor air; Ambient air measurement - Measurement of indoor air - Determination of polychlorinated biphenyls (PCBs), GC / MS method for PCB 28, 52, 101.138, 153, 180 / Measurement of indoor air pollution - Measurement strategy for polycyclic aromatic hydrocarbon
VDI 2464 Bl.1 - Measurement of polychlorinated biphenyls (PCBs) Ambient air measurement - Indoor air measurement - Measurement of polychlorinated biphenyls (PCBs) - GC/MS method for PCB 28, 52, 101, 138, 153, 180; Deviation to the Standard: GC-ECD instead of MSD
VDI 3865 Blatt 4; i.A. - Determination of volatile organic compounds BTEX, Benzol: MEasurement of organic soil pollutants; Gas chromatographic determination of volatile organic compounds in soil gas; Direkt measurement
VDI 3865 paper 3 - Determination of volatile organic compounds Measurement of organic soil pollutants - GC determination of volatile organic compounds in soil gas - Adsorption on activated charcoal and desorption with organic solvent
VDI 3875 (Draft), based on - Polycyclic aromatic hydrocarbon Air pollution measurement - Measurement of indoor air - Measurement of polycyclic aromatic hydrocarbons (PAHs) - Gaschromatographic determination
VDI 4300-8 - Sampling of house dust Measurement of indoor air pollution - Sampling of house dust
VDI 4301-2 - Measurement of PCP and lindane with GC/MS Measurement of indoor air pollution - Measurement of pentachlorophenol (PCP) and y-hexachlorocyclohexane (lindane) - GC/MS method
VdL-RL 03 § 4.2 - Determination of the total formaldehyde concentration Guideline for the determination of the formaldehyde concentration in water based emulsion paints and related products; § 4.2: Determination of the total in-can-formaldehyde concentration with acidic steam distillation
Volvo automobile testing (emissions)
Volvo NOTE-TEREG 31841600: Technical Regulation Tunnel Console SPA#90 Tunnel Console
Volvo STD 1024,1116 - Determination of compression set Compression set - Rubber material
Volvo STD 1024,2111 - Tensile properties Tensile strenght -Plastics
Volvo STD 1024,2112 - Tensile properties Tensile strength and break elongation - Plastics
Volvo STD 1024,2843-A - Peeling strength (method A) Peeling strength - Laminated materials (method A: with testing machine)
Volvo STD 1024,2843-B - Peeling strength (method B) Peeling strength - Laminated materials (method B: with weights)
Volvo STD 1024,3113 - Scratch resistance with an Erichsen hardness tester Scratch resistance (with an Erichsen hardness tester) - Organic materials
Volvo STD 1024,3516/1eA (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Determination of charpy impact strength (notched) of rigid materials - Plastics
Volvo STD 1024,3516/1eU (Charpy impact strength) - Determination of Charpy impact properties Determination of charpy impact strength (unnotched) of rigid materials - Plastics
Volvo STD 1024,3716 - Tearing strength (crescent test pieces) Tearing strength (crescent test pieces) - Rubber, vulcanized or thermoplastic
Volvo STD 1024,3725 - Tearing strength Tearing strength - Leather and artificial leather
Volvo STD 1024,7122 - Abrasion resistance, Martindale Abrasion resistance, Martindale - Fabrics
Volvo STD 1024,7134 - Abrasion with brush Abrasion - Organic materials
Volvo STD 1026,5172 - Determination of colour in colour-matching booth Determination of colour in colour-matching booth
Volvo STD 1026,5272 - Gloss measurement (20°, 60°, 85°) Gloss - Paints and enamels
Volvo STD 1026,8177 - Chemical resistance Chemical resistance - Surface treatments
Volvo STD 1026,8201 (ISO 105-A02) - Grey scale for assessing change in colour Grey scale - Determination of changes in colour
Volvo STD 1026,8202 (ISO 105-A03) - Grey scale for assessing staining Grey scale for assessing staining
Volvo STD 1026,8242 - Colour fastness to artificial light at 100 °C Organic materials - Colour fastness to artificial light at 100 °C
Volvo STD 1026,8243 - Lightfastness at 60 °C Light fastness 60 °C black panel temperature
Volvo STD 1026,8432 - Colour fastness to rubbing Colour fastness to rubbing - Rubber, plastics and textiles
Volvo STD 1027,051 - Evaluation degrees of blistering Evaluation degrees blistering of paints - Paints and enamels
Volvo STD 1027,2711 (Fogging F) - Determination of fogging characteristics (fogging F) Fogging - Organic materials (Fogging F, reflectometric)
Volvo STD 1027,2712 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo STD 1027,2713 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 1027,2714 - Determination of organic emissions (TVOC) Determination of organic emissions from non metallic materials in vehicle interiors - Organic materials (TVOC)
Volvo STD 1027,2714 / VCS 1027,2759-MS/FID - Determination of organic emissions (TVOC-MS) Determination of organic emissions from non-metallic materials in vehicle interiors - Organic materials (TVOC-MS)
Volvo STD 1027,337 - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo STD 1029,5472 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamel
Volvo STD 1029,5473 - Adhesion test with switchblade Adhesion - Paints and enamels
Volvo STD 104-0001 - Burning behaviour Flammability (burning behaviour) of interior materials
Volvo STD 420-0001 - Evaluation of degree of blistering Evaluation degrees blistering of paints - Paints and enamels
Volvo STD 420-0002 - Evaluation of degree of rusting Evaluation of degradation of paint coatings - Designation of degree of rusting
Volvo STD 420-0003 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging - Organic materials (Fogging F, reflectometric)
Volvo STD 420-0003 (Fogging G) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials (Fogging G, gravimetric)
Volvo STD 422-0005 - Resistance to soiling Resistance to soiling - Textiles
Volvo STD 423-0009 - Adhesion test with switchblade Adhesion - Paints and enamels, knife technique
Volvo STD 423-0011 - Chemical resistance (hot plate) Chemical resistance, hot plate - Paints and enamels
Volvo STD 423-0012 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamel
Volvo STD 423-0014 - Accelerated corrosion test Accelerated corrosion test
Volvo STD 423-0018 - Moisture resistance Moisture resistance in tropical cabinet - Chemical materials
Volvo STD 423-0023 - Gloss measurement Gloss - Paints and Enamels
Volvo STD 423-0030 - Scratch resistance, Erichsen pen Scratch resistance, Erichsen pen - Organic materials
Volvo STD 423-0035 - Tensile strength of seams Tensile strength of seams - Organic materials
Volvo STD 423-0037 Method A - Colour fastness to rubbing Colour fastness to rubbing
Volvo STD 423-0037 Method B - Colour fastness to rubbing Colour fastness to rubbing
Volvo STD 423-0047 - Colour fastness to artificial light at 100 °C Light exposure - Accelerated colour fastness test of interior materials
Volvo STD 423-0061 - Ligth exposure Light exposure at 75 °C - Accelerated colour fastness test of interior
Volvo STD 429-0001 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo STD 429-0002 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 429-0003 (MS/FID) - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors (TVOC-MS) - Organic materials
Volvo STD 429-0003 - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors (TVOC) - Organic materials
Volvo STD 5031,1 - after climate storage - Burning behaviour Flammability of interior materials (after climate storage)
Volvo STD 5031,1 - after heat storage - Burning behaviour Flammability of interior materials (after heat storage)
Volvo STD 5031,1 - original condition - Burning behaviour Flammability of interior materials (original condition)
Volvo STD 5711,102-NSS - Salt spray fog test (NaCl solution) Corrosion test in artificial atmospheres - salt spray tests - Inorganic coatings; § 2.2.1: NSS test, NaCl solution
Volvo STD 5712,102 - Adhesion, file test Adhesion, file test (adhesion of metallic coating to basic metal)
Volvo STD 5712,104 - Adhesion, burnishing test Adhesion, burnishing test
Volvo STD 5715,102 - Evaluation of degree of rusting Evaluation of degradation of paint coatings - Designation of degree of rusting
Volvo TC 428.02 - Resistance to stain removing agent Resistance to stain removing agent - Surface material such as upholstery, leather, coated fabrics, etc.
Volvo TC 80000003 - Soiling and cleaning Soiling and cleaning of plastic surfaces
Volvo TC 85000005 - Linting resistance Linting resistance (modified Martindale-procedure)
Volvo TC 85000006 - Resistance to pilling Resistance to pilling
Volvo TC 85000010 - Resistance to staining, soiling resistance and cleanability Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials
Volvo TC 85000010-A - Resistance to staining, soiling resistance and cleanability Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials
Volvo TC 85000010-B - Soiling and cleaning behavior Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials.
Volvo TC 85000011 § 6.1. - Resistance to abrasion (Martindale) Evaluation of soil-repellent finishes on textile materials
Volvo TC 85000011 § 6.2. - Resistance to cleaning Evaluation of soil-repellent finishes on textile materials - resistance to cleaning
Volvo TC 85000011 § 6.3. - Resistance to aging after cleaning Evaluation of soil-repellent finishes on textile materials - the influence of aging on cleaned treated material
Volvo TC 85000013 - Soiling and cleaning Soiling and cleaning of textile carpets
Volvo TC 85000015 - Determination of the firmness of loops Determination of the firmness of loops in terry fabrics or other loop fabrics
Volvo TC 85000020 - Crease test Crease test on foam laminated surface materials
Volvo TC 85000025 - Resistance against Velcro Resistance against Velcro for woven and knitted textiles (modified Martindale)
Volvo TC 85000035 - Fraying of seam Fraying of seam
Volvo TC 85000120 - Resistance to soiling and cleanability Resistance to soiling and cleanability of leather and tricot plastic
Volvo TC 85000145 - Soiling and Cleaning Dye transfer by jeans fabric
Volvo TC 85000150 - Resistance to staining, soiling resistance and cleanability Substance soiling and cleanability for interior hard surfaces, coated fabrics and leather
Volvo TC 85042802 - Resistance to stain removing agents Resistance to stain removing agents
Volvo TC 88100002 - Abrasion resistance against leather Abrasion resistance of soft and hard plastic surfaces
Volvo TC 88200001 - Sun tan lotion test Sun tan lotion test
Volvo TR 31816382: Tunnel Console Y285/286/381/483 Tunnel Console
Volvo TR 31825672: Tunnel Module Y413
Volvo TR 31833217 § 8.1.16 - Resistance to Sun Lotion Sun lotion test
Volvo TR 31833217: DPR Tunnel and Center Stack 311A DPR Tunnel and Center Stack 311A
Volvo VCS 1024,21129 - Tensile properties Tensile strength and break elongation - Plastics
Volvo VCS 1024,28519 - Interlaminar strength Interlaminar strength - Soft laminates
Volvo VCS 1024,31139 - Scratch resistance with Erichsen pen Scratch resistance, Erichsen pen (Typ 318) - Organic materials
Volvo VCS 1024,37219 - Tearing strength Tearing Strength - Textiles
Volvo VCS 1026,51729 - Evaluation of colour Assessment of colour in light booth
Volvo VCS 1026,52729 - Gloss measurement (20°, 60°, 85°) Gloss - Paints and enamels
Volvo VCS 1026,81779 - Chemical resistance Chemical resistance - Paints and enamels
Volvo VCS 1026,82029 (ISO 105-A03) - Grey scale for assessing staining Grey scale for assessing staining
Volvo VCS 1026,82429 - Colour fastness to artificial light at 100 °C Organic materials - Colour fastness to artificial light at 100 °C
Volvo VCS 1026,84329 - Colour fastness to rubbing Colour fastness to rubbing - Rubber, plastics and textiles
Volvo VCS 1026,84349 - Colour fastness to rubbing (Veslic abrasion) Colour fastness to rubbing - Paints and enamels
Volvo VCS 1027,0519 - Evaluation of degree of blistering Evaluation degrees for blistering of paints
Volvo VCS 1027,1449 - Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load) Accelerated corrosion test, version II - ACT II; cyclic atmospheric corrosion test with salt load
Volvo VCS 1027,2719 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging - Organic materials; Fogging F (reflectometric)
Volvo VCS 1027,2719 (Fogging G) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials; Fogging G (gravimetrical)
Volvo VCS 1027,2729 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo VCS 1027,2739 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo VCS 1027,2749 - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors - Organic materials (TVOC)
Volvo VCS 1027,2749 / VCS 1027,2759-MS/FID - Determination of organic emissions (TVOC-MS) Determination of organic emissions from non-metallic materials in vehicle interiors, Organic materials (TVOC-MS)
Volvo VCS 1027,2769 - Organic emission (Test chamber procedure - Standard-emission testing) Determination of volatile organic substances from interior components / systems using a 1 m³ emission chamber - Organic materials
Volvo VCS 1027,3379 - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo VCS 1027,359 - Light fastness (black standard temperature 75 °C) Colour fastness to artificial light at 75 °C - Accelerated ageing of interior materials
Volvo VCS 1029,54729 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamels
Volvo VCS 1029,54739 - Adhesion test with folding knife Adhesion - Paints and enamels
Volvo VCS 5031,19 - after climate storage - Burning behaviour - after climate storage Flammability of interior materials (after climate storage)
Volvo VCS 5031,19 - after heat storage - Burning behaviour - after heat storage Flammability of interior materials (after heat storage)
Volvo VCS 5031,19 - original condition - Burning behaviour - original condition Flammability of interior materials (original condition)
VW 2.8.1 § 3.13 - Greasing Elastomers - Material requirements and inspections; § 3.13: Greasing
VW 2.8.1 § 3.9 - Ozone Resistance Elastomer - Material requirements and inspections; § 3.9: Ozon resistance
VW 2.8.1: Elastomers - Materials Requirements and Testing elastomer materials used for components and technical molded parts in motor vehicles
VW 44045: Polypropylene, Finished Parts - Material Requirements For finished parts made from polypropylene homopolymers and copolymers, non-reinforced and reinforced.
VW 50105 - Upholstery Cover Materials - Requirements, Quality Specifications, Tests Upholstery Cover Materials - basic requirements
VW 50105 § 10.7 - Permanent set Upholstery cover materials - Requirements, quality specifications, tests; § 10.7: Permanent set (thickness of foam ? 8,0 mm)
VW 50123-4.5.2/6.1 (TGA) - Thermogravimetrical analysis (TGA) Thermoplastic elastomers - Quality requirements; § 4.5.2: Thermogravimetry (TGA)
VW 50123: Thermoplastic Elastomers - Quality Requirements For materials on the basis of thermoplastic elastomers (TPE) for motor vehicle components.
VW 50125: Polyamide 6 - Finished Parts in the Passenger Compartment - Material Requirements For inner door handles and other parts in the vehicle interior that are made from PA6 with different levels of glass fiber content or glass fiber and mineral mixtures.
VW 50127: Polyamide 66, Finished Parts in the Passenger Compartment - Material requrements interior door handles and other
VW 50127: Polyamide 66, finished parts of the vehicle interior - Material requirements e.g. door handles and other parts of PA66 with different glass fiber contents and fiber and mineral mixtures in the vehicle interior
VW 50129 § 3.13 - Abrasion from a window glass pane edge Bonded coating-covered body seals - Requirements and tests; § 3.13: abrasion from a window glass pane edge
VW 50129 § 3.15 - Abrasion by means of abrasion cloth Bonded coating-covered body seals - Requirements and tests; § 3.15: Abrasion by means of abrasion cloth
VW 50129: Bonded Coating-Covered Body Seals Tests for anti-friction elastomeric seals in the body area.
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50133: PA66 for Finished Parts Outside the Vehicle Interior - Material Requirements For glass fiber-reinforced and/or mineral-reinforced PA66 used in the engine, chassis, gearbox, and body areas (without paint).
VW 50134: PA6 for Finished Parts Outside the Vehicle Interior - Material Requirements For glass fiber-reinforced and/or mineral-reinforced PA6 in the engine, chassis, gearbox, and body areas (without paint).
VW 50136: PBT for finished parts outside of the vehicle interior Material requirements for unreinforced and glass fiber reinforced PBT in the engine, chassis and body
VW 50180: Components in the Passenger Compartment - Emission Behavior Evaluation criteria for use of low-emission materials and components in the passenger compartment and trunk as well as for parts that come into contact with air flowing into the passenger compartment.
VW 50180: Components of the vehicle interior - emission behavior Evaluation criteria for use of low-emission materials and components in the passenger compartment and trunk as well as for parts that come into contact with air flowing into the passenger compartment.
VW 50181 (Fogging G) - Determination of the fogging characteristics (Fogging G) Lights with transparent cover - Fogging behaviour (Fogging G)
VW 50185: Vehicle Parts - Resistance to Open-Air Weathering Vehicle Parts - Resistance to Open-Air Weathering
VW 50190 (Colour) - Colourimetric evaluation Components of the vehicle interior trim - Colorimetric evaluation (here color)
VW 50190 (Colour) - Colourimetric evaluation Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces (here color)
VW 50190 (Gloss) - Colourimetric evaluation Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces (here gloss)
VW 50190: Components of the Vehicle Interior Trim - Colorimetric Evaluation Color and gloss measurement
VW 50195 § 3.2.1 Solid paint - color meassurement (CIELAB) Colorimetric Evaluation of Automobile Paint Coatings § 3.2.1 Solid paint
VW 52065: Cellular Rubber Elastomer Sealing Material -Material Requirements For elastomer sealing material of cellular rubber for molded or extruded parts or sound insulating material.
VW 80972 § 5.6 - Resistance to chemical agents Car radio - General requirements; § 5.6: Chemical requirements (resistance to chemical agents)
VW Colour fastness to abrasion (rotary abrasion test) VW - Colour fastness to abrasion (rotary abrasion test - Schopper): Rating of staining on cotton fabric
VW EP 81020.16 - Screw tight fit ZSB Car body - Screw tight fit
VW PV 1065 - Potential differences and layer thicknesses of nickel coatings Chrome-Plated Surfaces - Determination of potential differences and layer thicknesses of nickel coatings
VW PV 1200 - Resistance to environmental cycle test Vehicle parts - Testing of resistance to environmental cycle test (+80/-40) °C
VW PV 1209 - Environmental corrosion cycle test Condensers, radiators, and charge air coolers made of aluminum alloys - Corrosion test (environmental corrosion cycle test)
VW PV 1210 - Corrosion test Body and add-on parts - Corrosion test
VW PV 1217 - Resistance to stone impact Paints and varnishes on plastics - Resistance to stone impact
VW PV 1300 - Thermal stability test PVC and PVC mixed polymer - Thermal stability test
VW PV 1303 - Light exposure test (100°C) Non-metallic materials - Exposure test of passenger compartment components
VW PV 1306 - Exposure test for determining the tackiness Non-metallic materials - Exposure test for determining the tackiness of polypropylene parts
VW PV 1323 - Sun test Non-metallic materials - UV radiation on thermoplastic material, outside, in sun test
VW PV 1502 - Weathering (resistance to cracking) Clear coat for dual-layer metallic paint coatings - Testing for resistance to cracking
VW PV 1503 - Steam jet test Paint coating of metallic an non-metallic materials - Pressure washer test
VW PV 2005-A - Climate cycle resistance; Variant A: single parts Vehicle parts - Testing of resistance to environmental cycle test; Variant A: single parts
VW PV 2027 - Tensile load Test specification - Angular bonding - Strength test, tensile load
VW PV 2034 - Floating roller peel test (adhesion test) Non-metallic planar materials - Floating roller peel test
VW PV 2037 - Resistance to preservaties and cleaning agents Plastic parts, metal-nonmetal bonds - Resistance to preservaties and cleaning agents
VW PV 3.10.7 - Testing for substances which disrupt the paint wetting Paints and varnishes - Testing for substances which disrupt the paint wetting
VW PV 3.11.1 - Resistance to premium gasoline Paints and varnishes - Testing of resistance to premium gasoline
VW PV 3.11.2 - Resistance against FAM test fuel Paints and varnishes - Resistance test against FAM test fuel
VW PV 3.11.3 - Resistance to diesel fuel Paints and Varnishes - Testing of resistance to diesel fuel
VW PV 3.12.1 - Oil resistance Paints and Varnishes - Testing of oil resistance
VW PV 3.2.4 - Gloss measurement Paints and varnishes - Determining the reflectometer value according to DIN 67530
VW PV 3015 - Determination of the fogging characteristics (Fogging G) Non-metallic materials for interieur trim - Determining condensable constituents (Fogging G)
VW PV 3307 - Determination of plastic and elastic deformation Elastomer Components - Plastic and elastic deformability
VW PV 3314 § 3.5 - Tear strength between edge protection and hose or lip Edge protection with hose seal - Materials testing; § 3.5: Tear strength between edge protection and hose or lip
VW PV 3316 - Reference photographs after Exposure to ozone Rubber products - Reference photographs after exposure to ozone (crack formation due to exposure to ozone, evaluation classes)
VW PV 3340 § 4 - Tensile strength of the adhesive seam EPDM-profile, roof trims - Tests; § 4: Tensile strength of the adhesive seam of the additional seal for type golf A2
VW PV 3341 - Determination of emission of organic compounds (TVOC with HS-GC-FID) Non-metallic materials in automotiv interior trim - Determination of emission of organic compounds (TVOC with HS-GC-FID)
VW PV 3341-MS/FID - Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD) Non-metallic materials in automotiv interior trim - Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD)
VW PV 3353 - Soiling and cleanability behaviour Vehicle interior trim surfaces - Soiling and cleaning behavior
VW PV 3354 - Adhesion of the finish Testing of leather - Adhesion of the finish
VW PV 3356 - Soiling and cleanability behaviour Textiles and films - Soiling and cleaning behavior (Martindale-Verfahren)
VW PV 3360 - Determination of the fluffing behaviour (Random Tumble Pilling Tester) Upholstery materials - Determination of the fluffing behaviour
VW PV 3361 - Velcro closure test Upholstery materials - Wear and external pilling characteristics - Velcro closure test
VW PV 3366 - Wear characteristics of flocked material (VW chisel test) Elastomer seals - Wear characteristics of flocked material
VW PV 3427 - Elasticity test PUR-soft foam - Elasticity
VW PV 3900 (Variant 1) - Odour test Components in passenger compartment - Odor test; Variant 1: 23 °C / 24 h
VW PV 3900 (Variant 2) - Odour test Components in passenger compartment - Odor test; Variant 2: 40 °C / 24 h
VW PV 3900 (Variant 3) - Odour test Components in passenger compartment - Odor test; Variant 3: 80 °C / 2 h
VW PV 3903 - Flexural strength Non-metallic flat items - Measurement of flexural strength
VW PV 3904 - Flame Retardance (Ageing storage) Interior trim materials - Flame retardance
VW PV 3905 - Ball drop test Organic materials - Ball drop test
VW PV 3906 - Abrasion behaviour Non-metallic planar fabrics - Testing of abrasion behavior
VW PV 3907 - Brush abrasion test Textiles - Brush abrasion test (Rotary abrasion machine)
VW PV 3908 - Rotary abrasion test (Schopper) Textiles, carpets - Wear resistance (Abrasive paper)
VW PV 3909 - Static and permanent elongation Non metallic planar materials - Measurement of static and permanent elongation
VW PV 3920 (Fogging F) - Determination of the fogging characteristics (Fogging F) Nonmetallic materials for the interior - Determination of the fogging value (Fogging F)
VW PV 3922 - Oil and water repelling behavior Planar fabrics and molded parts - Oil and water repelling behavior
VW PV 3925 (HPLC) - Formaldehyde and other carbonyls with HPLC
VW PV 3925 - Measuring emissions of formaldehyde Polymer materials - Measuring emissions of formaldehyde
VW PV 3927 - Thermogravimetrical analysis (TGA) Thermogravimetric analysis for plastics and elastomers - Determination: Plasticizers, Carbon Black (TGA)
VW PV 3928 - External pilling (Martindale procedure) Planar fabrics of the vehicle interior trim - Determination of external pilling on automobile upholstery fabrics
VW PV 3929 - Resistance to weathering (dry-hot climate, e.g. Kalahari, Arizona, South America) Non-metallic materials - Weathering in dry, hot climate
VW PV 3930 - Resistance to weathering (moist, hot climate, e.g. Florida) Non-Metallic materials - Weathering in moist, hot climate
VW PV 3931 - Hardness test (Shore L) Hardness testing - PUR integral foam - Steering wheel rim
VW PV 3932 - Wear resistance of flocking (VW chisel test) Flocked plastic parts - Abrasion resistance
VW PV 3936: Polymer Materials - Testing the Resistance to Components of Blowby Gases Polymere Materials
VW PV 3937 - Amine emission (inidicator method) Amine emissions from PUR flexible foam - Indicator method
VW PV 3939 § 3.1 - Determination of extractable components Tubes in windscreen washer systems - Extractable components; § 3.1: Determination of extractable components using an extraction apparatus
VW PV 3939 § 3.2 - Visual evaluation of extractable components Tubes in windscreen washer systems - Extractable components; § 3.2: Visual evaluation of extractable components
VW PV 3942 - Determination of organic emissions Determining organic emissions from components for the passenger compartment of motor vehicles - Emission test
VW PV 3944 - Amine discoloration PVC-sun visor - Amine discoloration
VW PV 3945 - Dynamic-Mechanical Analysis Elastomers and Thermoplastic Elastomers - Determining the Low-Temperature Flexibility with DMA
VW PV 3946 - Seam strength Upholstery material - Determination of the strength, resistance to tearing and shifting of seams
VW PV 3949 - Snag test (with abrasion chisel) Upholstery cover materials - Snag test
VW PV 3952 - Scratch resistance Plastic interior components - Testing of scratch resistance (followed by colour measurement)
VW PV 3955 - Determination of the seam slippage resistance Upholstery cover material - Determining the seam slippage resistance of upholstery cover material: woven fabrics
VW PV 3958 - Determination of water tightness Textile floor mats - Water tightness
VW PV 3959 Hydrolysis test on the roof liner with laminated interior décor
VW PV 3959 - Hydrolyseprüfung am Formhimmel Hydrolysis Test on Molded Headliners with Laminated Decorative Material in the Interior
VW PV 3961 - Hook-and-Loop test Upholstery Fabric - Velcro test
VW PV 3964 - Cream resistance Surfaces in the passenger compartment - Testing of cream resistance
VW PV 3964: Surfaces in the Passenger Compartment - Testing of Cream Resistance coated surfaces in the passenger compartment
VW PV 3965 - Visual Color Matching Decorative Surfaces on and in the Vehicle - Visual Color Matching according to DIN EN ISO 3668
VW PV 3966 - White cracking properties (Ball drop test) PP Components - White cracking properties (Ball drop test)
VW PV 3968 - Soiling behaviour (Martindale method) Leather - Soiling behavior (Martindale method)
VW PV 3970 - Determination of the potential for mold growth Determination of the potential for mold growth
VW PV 3975 - Scrub Resistance of High-Gloss Surfaces Abrasion resistance of high gloss surfaces in the vehicle interior
VW PV 3975 Draft - Abrasion resistance on high gloss surfaces VW Abrasion resistance on high gloss surfaces
VW PV 3976 - Corrosion effect on copper Determining / evaluating the corrosion effect of elastomers on electrolyte copper
VW PV 3983 - Stress crack resistance Total vehicle - media resistance of plastics and thermoplastic elastomers in conjunction with mechanical stresses
VW PV 5015 BR - Resistance to Hydrolisis Test Prescription - Resistance to hydrolisis in PU foams
VW QP R 015: Quality Requirements - Self-Adhesive Film Quality requirements for self-adhesive films for the protection of new vehicles during transport.
VW TL 1010 - Burning behaviour Materials for vehicle interiors - Burning behavior, material requirements
VW TL 1010: Materials for Vehicle Interiors - Burning Behavior, Material Requirements Flammability including the requirement for aging. Burning behavior of materials/ components in the passenger compartment.
VW TL 203 § 3.4c - File test Electroplated Ni-Cr coatings - Requirements for surface protection; § 3.4c: File test
VW TL 203 § 3.4d - Resistance to temperature cycling Electroplated Ni-Cr coatings - Requirements for surface protection; § 3.4d: Resistance to temperature cycling
VW TL 211: Paint Coatings on Exterior Plastic Parts Requirements for primer coat, single and multi-layer paint coatings acc. to color standard or custom color combination chart on plastic parts (body-mounted parts, e.g. bumper, wheel cover, rear spoiler, trunk lid, liftgate, fender, etc).
VW TL 211: Paint Coatings on Exterior Plastic Parts Requirements for primer coat, single and multi-layer paint coatings acc. to color standard or custom color combination chart on plastic parts (body-mounted parts, e.g. bumper, wheel cover, rear spoiler, trunk lid, liftgate, fender, etc).
VW TL 226 § 3.12.3.2 / PV 3906 - Abrasion behaviour, 100 crockmeter strokes against dry cloth Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.2: Abrasion behavior, 100 crockmeter strokes against dry cloth
VW TL 226 § 3.12.3.3 / PV 3906 - Abrasion behaviour, 100 crockmeter strokes against moist cloth (water) Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.3: Abrasion behavior, 100 crockmeter strokes against moist cloth (water)
VW TL 226 § 3.12.3.4 / PV 3906 - Abrasion behaviour, 2000 crockmeter strokes against dry cloth Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.4: Abrasion behavior, 2000 crockmeter strokes against dry cloth
VW TL 226 § 3.13.2 - Drop test Paint coating on materials used in the vehicle interior trim - Requirements; § 3.13.2: Resistance to cleaning agents and synthetic sweat, drop test
VW TL 226 § 3.13.3 / PV 3906 - Abrasion behaviour Paint coating on materials used in the vehicle interior trim - Requirements; § 3.13.3: Resistance to cleaning agents and synthetic sweat, abrasion behaviour
VW TL 226 § 3.7.2 - Crosscut test (St. Andrew's cross) with adhesive tape pull-off Paint coating on materials used in the vehicle interior trim - Requirements; § 3.7.2: Adhesion and brittleness in initial condition, crosscut test
VW TL 226: Paint Coating on Materials used in the Vehicle Interior Trim - Requirements Painted, pad-printed, heat-sealed, inmold decorated (IMD) and cubic-printed metallic and non-metallic materials, which are used in the vehicle interior.
VW TL 481: PVC-Foam Film e.g. door and side trim panel
VW TL 496 § 3.14 - Resistance to cleaning agents (Staining) Door and rear side trim panel ASSY - Material requirements; § 3.14: Resistance to cleaning agents (Staining)
VW TL 496 § 3.15 (a) - Cleaning behavior with solvents Door and rear side trim panel ASSY - Material requirements; § 3.15a: Cleaning behavior of the surface materials, cleaning behavior with solvents
VW TL 496 § 3.15 (b) - Drop test Door and rear side trim panel ASSY - Material requirements; § 3.15b: Cleaning behavior of the surface materials, drop test
VW TL 496 § 4.2.5 - Behavior against detergents Door and side trim panel ASSY - Material requirements; § 4.2.5: Behavior of decorative material to detergents (bleeding)
VW TL 496 § 5.5 - Droplet test Door and side trim panel ASSY - Material requirements; § 5.5: Droplet test
VW TL 496: Door and Rear Side Trim Panel ASSY - Material Requirements For door trim panels and rear side trim panels ready for installation, including all add-on parts.
VW TL 52018: Adhesive Foam Tape, Adhesive-Coated on Both Sides - Material Requirements The adhesive foam tape described herein serves to fasten plastic add-on parts such as, e.g., side
VW TL 52035 § 5.14 - Resistance to test media PP / EPDM / PE polymer blend - Finished parts; § 5.14: Resistance against detergents and sealants (Resistance to test media)
VW TL 52035: PP/EPDM/PE-Polymer Blend, Finished Parts - Material Requirements PP/EPDM/PE-polymer blends or PP/EPDM-polymer blends for finished parts
VW TL 52045-4.4 - Drop test PUR integral foam for steering-wheel coating - Material requirements; Tabel 2 point 4: Drop test
VW TL 52045: PUR-Integral Foam for Steering Wheel Coating - Material Requirements PUR-Integral Foam for Steering Wheel Coating
VW TL 52057 § 4.5.3 - Separating force EPDM door seal with protective edging profile; § 4.5.3: Separating force
VW TL 52062: PA 6.6, Glass Fiber Reinforced, for Finished Parts - Material Requirements glass fiber reinforced PA 6.6, e.g. for water tanks
VW TL 52064: Leather, Material requirements, 6 types: A, C, G, D, E, F For leather used in the vehicle interior: seats, steering wheels, gearshift boots, leather-covered dashboards, other leather-covered interior components
VW TL 52094: Trim Panel Load Compartment - Material Requirements e.g. Trunk floor mat
VW TL 52226 - Molded Headlining ASSY, Lightweight Types - Material Requirements For ready-toinstall roof linings for passenger cars with a substrate weight per unit area of < 1,500 g/m² (= lightweight type).
VW TL 52231: ABS and PC Polymer Blends - Material Requirements For finished parts made of ABS and PC polymer blends, e.g., for instrument cluster trim panels, dashboards, and storage boxes.
VW TL 52231: Labels - Self-Adhesive, Material Requirements Adhesive labels in teh interior and on the exterior of the vehicle
VW TL 52254: Knitted foam, laminated - Material requirements For foam-laminated knit fabric to be used as trim for molded headlining ASSY or as cut and sew headliner.
VW TL 52277: Impact-Resistant Modified Finished Parts Made of POM, Material Requirements finished parts made of impact-resistant, modified POM, e.g., pump accumulators and gravity valves
VW TL 52283 § 4.7 - Resistance to agents Polypropylene, elastomer-modified, talc - or Mineral-Modified - Material requirements; § 4.7: Resistance to agents
VW TL 52283: polypropylene, elastomer-modified, modified talc or mineral - Material requirements Precast polymer blends of ABS and PC
VW TL 52283: polypropylene, elastomer-modified, talc or mineral reinforced exterior components Finished parts made of PP, elastomer- and modified talc or mineral, e.g. insert parts / guides for bumper covers / bumper cooling air grille / door coverings
VW TL 52288: Polyamide, Mineral-Reinforced, Finished Parts, Material Requirements mineral-reinforced polyamide, e.g. for full wheel covers
VW TL 52296 § 2.1.4 - Resistance to agents (drop test) Dashboard and knee bar ASSY - Material requirements; § 2.1.4: Resistance to agents (drop test)
VW TL 52296: Dashboard and other Foam-Backed Components - Material Requirements Dashboard and other Foam-Backed Components for the vehicle interior
VW TL 52306: Carpet - Material Requirements - Tabelle 2 - Mat for deformable motor vehicle floor carpets
VW TL 52311: ASA Graft Plymer - Material Requirements ASA graft polymer for finished parts, e.g. radiator grilles
VW TL 52311: ASA-Graft Polymer, Finished Parts - Material Reqiurements ASA-Graft Polymer for Finished Parts
VW TL 52321: Wood Parts for Interior Trim - Material Requirements For decorative wood parts of the passenger car interior, such as trims, tray areas in the door side area, dashboard area, and center console area.
VW TL 52323: Nonwoven Fabric Damping, Molded - Materials Requirements For molded nonwoven fabric damping, if applicable with heat shielding function in the engine compartment.
VW TL 52345 § 4.9.1 - Abrasion from a window glass pane edge EPDM Body Seals - Quality requirements; § 4.9.1: Wear resistance of paint coating, abrasion over window glass edge
VW TL 52345-3 (finished parts): EPDM Body Seals - Quality Requirements Body seals (in part, coated with bonded coating, functional coatings and flocking) for sealing of door systems and lids.
VW TL 52345-3 (Material): EPDM Body Seals - Quality Requirements EPDM Body Seals ((in part, coated with bonded coating, functional coatings and flocking) for sealing of door systems and lids
VW TL 52350 - top material for Convertible - Material requirements Folding-top cloth for convertibles
VW TL 52382: PC / PBT - Blend, finished parts painted, material requirements e.g. bumper cover
VW TL 52388: Polypropylene for Passenger Compartments - Material Requirements Polypropylene in passenger compartment trims
VW TL 52388: Polypropylene for Passenger Compartments - Material Requirements Polypropylene in passenger compartment trims
VW TL 524 82 - Textile floor mats: Material requirements Textile floor mats
VW TL 52428 - Protective Decorative Film - Component Requirements Decorative Film
VW TL 52439: Polyamide tube, Material requirements Tubes made of polyamide 11 or polyamide 12, e.g. for Diesel fuel lines
VW TL 52440: PA6, fibre-glass reinfored, finished part, material requirements PA6, fibre-glass reinfored, finished part
VW TL 52440: PA6, fibre-glass reinfored, finished part, material requirements Not for new design and drawing changes
VW TL 52447: Flocking of Interior Trim Material - Material Requirements Flocking of Interior Trim Material
VW TL 52452: Polypropylene with Increased Crystallization - Material Requirements Polypropylene with Increased Crystallization in the vehicle interior
VW TL 52463: Polypropylene Multiwall Sheet Polypropylene Multiwall Sheet for e.g. cover plate for Group seat, reinforcement plate in trunk, cover for spare wheel well
VW TL 52472 § 3.5.14 - Color fastness to abrasion (rotary abrasion test) Polyolefins for floor coverings - Material requirements; § 3.5.14: Color fastness to abrasion (rotary abrasion test - Schopper): Staining of the rubbing cloth
VW TL 52472: Polyolefins for floor coverings
VW TL 52475: ABS + PA6-Polymer blend - Material requirements Polymer blends of acrylic-butadiene-styrene and polyamide, from which in the injection molding process, for example, Steering column linings are made.
VW TL 52476: POM, finished parts - material requirement For finished parts made of polyoxymethylene (POM), e.g. loudspeaker covers, and joining elements (clips).
VW TL 52476: POM, finished parts - Material requirements Finished parts of polyoxymethylene (POM)
VW TL 52478: Foam Coated fabrics, laminated - Material requirements Laminated Foamed Leatherette
VW TL 52499 § 5.5.1 - Color fastness to abrasion (rotary abrasion test) Trim panels made of molded, thermoplastically bonded mixed fiber material - Material requirements; § 5.5.1: Color fastness to abrasion (rotary abrasion test - Schopper)
VW TL 52499: Trim Panels Made of Molded, Thermoplastically Bonded Mixed Fiber Material, Material requirements Material requirements for trim panels made from a two-layer nonwoven such as, e.g. for trunk trims.
VW TL 52611 - Carpet Floor Mats - Material Requirements Floor mats in motor vehicle footwells
VW TL 52622: Thermoplastic Elastomers in combination with Thermoplastic for the Exterior e.g. the plenum panel cover, mirror triangle
VW TL 52625: Plastic Front-end Carrier - Test Scope for Material Data Sheets Material requirements of carriers made from thermoplastics and hybrid technology (e.g., glass fiber-reinforced PP, long glass fiber-reinforced PP, glass fiber-reinforced polyamide 6).
VW TL 52631 - Bumper Covers, Spoilers PP + EPDM + PE - polymer mixture, talcum, pigmented, stabilized against heat aging and UV radiation.
VW TL 52631: bumpers, bumper covers, spoilers, sill planking PP+EPDM+PE - Polymer mixture, talcum (10%)
VW TL 52636: POM,Finished Parts (Not for Passenger Compartment) Material Requirements finished parts made of unfilled or non-reinforced polyoxymethylene (POM)
VW TL 52639: Polypropylene, reinforced, impact, for instrument panel - Material requirements For elastomer and talc or mineral modified polypropylene fixed, for injection-molded instrument panel tops
VW TL 52641: EPDM Body Seals - Quality Requirements for interior and exterior parts that are subjected to dynamic loads and manufactured from EPDM
VW TL 52652: ASA and PC Polymer Blends- Material Requirements e.g. for unpainted trim panels and covers ( interior trim)
VW TL 52652: ASA and Polymer Blends, Material Requirements e.g., for unpainted trim panels and covers (interior trim)
VW TL 52653: PUR-Flexible Foam for Vehicle Seats - Material Requirements Seat-system components of full-formed PUR foam
VW TL 52660: underbody applications, engine capsule, stone guard, CW Covers Thermoplastics, thermosets, thermoplastic elastomers
VW TL 52662: Molded Parts Made of Needle-Punched - Material Requirements For molded parts made of needle-punched nonwoven, such as for outer wheel housing liners.
VW TL 52673: ASA + PA-polymer mixture Acrylonitrile-styrene-acrylate + polyamide polymer mixtures
VW TL 52682: PA66, fibre-glass reinfored, for coolant leading finished parts - material requirements For coolant leading components made of PA66-GF30. For those components made of PA66-GF30 which are not coming in contact with coolants applies the VW 50133.
VW TL 52685: Polyether PUR Lightweight Foam for Engine Compartment Absorbers - Material Requirements For both nondeformed PUR cut foam and nonwoven fabric-laminated molded parts made of PUR cut foam for use in the engine compartment.
VW TL 52688: Polypropylene for Battery Boxes - Material Requirements For battery boxes made of PP or PP with 20% talc additive.
VW TL 52688: Polypropylene for Battery Boxes - Material Requirements For battery box ASSYs (housing and cover welded) made of PP or PP with at least 5% and as much as 20% talc additive.
VW TL 52704: EPDM Body Seals - Material Requirements For body seals with and without surface coatings (antifriction coating, flocking, coextruded material, and film), e.g., for sealing of door systems, hoods, lids, tailgates, and sunroofs.
VW TL 52704: EPDM Body Seals - Material Requirements For body seals with and without surface coatings (antifriction coating, flocking, coextruded material, and film), e.g., for sealing of door systems, hoods, lids, tailgates, and sunroofs.
VW TL 52705: Polypropylene with Soft-Touch Haptic characteristics for vehicle interiors - material requirements material requirements for polypropylene (PP) components, used in vehicle interiors, that have stricter requirements concerning low gloss levels and special haptic characteristics
VW TL 527: ABS Graft Polymer, Finished Parts - Material Requirements For finished parts made of ABS graft polymer such as, e.g., seat side trim panels, radiator grilles, glove compartment flaps, trims, and covers.
VW TL 527: ABS Graft Polymer, Finished Parts - Material Requirements For finished parts made of ABS graft polymer such as, e.g., seat side trim panels, radiator grilles, glove compartment flaps, trims, and covers.
VW TL 528: Chrome-Plated Plastic Parts - Material Requirements For chrome-plated plastic Parts
VW TL 533: High -Density Polyethylene - Materials Requirements high-density polyethylene for finished parts (e.g. for protective caps, trims and air ducts)
VW TL 533: High -Density Polyethylene - Materials Requirements HDPE (high-density polyethylene) for finished parts (e.g. for protective caps, trims and air ducts)
VW TL 534: Polyamide 6, Finished Part - Material Requirements PA6 Finished Part
VW TL 82345: Shift mechanism ASSY, automatic transmission shift mechanisms with and without the Tiptronic function for automatic and automated shift transmissions
VW-PLUS-PR-04-23-E/4.1 - ingress/egress durability VW Ingress/Egress for passenger seats on a robot