imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
ZEK 01.4-08 - Polycyclic aromatic hydrocarbons Testing and evaluation of polycyclic aromatic hydrocarbons (PAH) for awarding the GS safety code
X-ray microanalysis (EDX) Energy dispersive X ray microanalysis (e.g. Scanning electron microscopy-EDX)
X-ray fluorescence spectroscopy (XRF) - Determination of elements using X-ray fluorescence analysis X-ray fluorescence analysis in scanning mode
WSS-M8P3-E1/E2/E3: Performance, Flexible polymeric film, Interior For materials used as interior trim coverings for seats, door panels, headlining and other applications.
Woolmark TM 31 - Dimensional change Woolmark test method - Washing of wool textile products; Dimensional change
Wicking Wicking
Weld corrosion - Evaluation degree of rusting Daimler - coating / painting for components: assessment of degree of rusting / Weld corrosion (general method)
Weight determination Weight determination
Weight change after storage in test medium Weight change after storage in test medium
Weight Weight
Water resistance (water permeability) General method - water resistance (water permeability) / eg. Honda 8360Z-TR0-A000 § 6-4
Water repellency (shower method) General method - Water repellency for textile materials (e.g. GM/Opel GMW 4726, Mazda MES MN 400X § 7.20)
Water absorption Water absorption
Washout effect Discolouration of organic materials due to elastomers (paint indifference) - Washout effect
VW/Audi LAH 000 853: Spoiler in the under-floor area Spoiler in the whole under-floor area
VW TL/ Specs 7031125: Specs Compression Moulded Material 7 Compression moulded material for the interior trim (e.g. backrest foundation board, carrier door trim panel, carrier decorative door insert cloth, carrier decorative door insert leather, carrier rear shelf)
VW TL 82345: Shift mechanism ASSY, automatic transmission shift mechanisms with and without the Tiptronic function for automatic and automated shift transmissions
VW TL 669: High-Molecular-Weight Polyethylene, Finished Parts - Material Requirements e.g. plastic fuel tanks, associated add-on and instalation parts
VW TL 598: Decorative film - Component requirements Decorative films as decorative elements on the exterior of the vehicle equipment incl. the bonding behavior with respect to relevant substrates
VW TL 591: Organic Glass for Lamps - Material Requirements For light covers made of organic glass, e.g., for stop lamps, turn signals, rear position lamps, parking lamps, and reversing lamps.
VW TL 561: Self-Adhesive PUR Foamed Plastic Seals, Material Requirements Impregnated PUR foamed plastic for self-adhesive seals, e.g. floor seals
VW TL 534: Polyamide 6, Finished Part - Material Requirements PA6 Finished Part
VW TL 533: High -Density Polyethylene - Materials Requirements high-density polyethylene for finished parts (e.g. for protective caps, trims and air ducts)
VW TL 533: High -Density Polyethylene - Materials Requirements HDPE (high-density polyethylene) for finished parts (e.g. for protective caps, trims and air ducts)
VW TL 528: Chrome-Plated Plastic Parts - Material Requirements For chrome-plated plastic Parts
VW TL 528: Chrome-Plated Plastic Parts - Material Requirements surfaces of chrome-plated plastic parts
VW TL 527: ABS Graft Polymer, Finished Parts - Material Requirements For finished parts made of ABS graft polymer such as, e.g., seat side trim panels, radiator grilles, glove compartment flaps, trims, and covers.
VW TL 527: ABS Graft Polymer, Finished Parts - Material Requirements For finished parts made of ABS graft polymer such as, e.g., seat side trim panels, radiator grilles, glove compartment flaps, trims, and covers.
VW TL 52722: Polyether PUR Foam in the Engine Compartment - Material Requirements For polyether PUR foam parts with sound-insulating properties in the engine compartment that are used, e.g., to reduce noise coming from the engine.
VW TL 52711: Underbody Protection - LWRT / cd Enhancing Underbody Panels Underbody protection (acoustically effective/ acoustically non-effective) made of LWRT (Lightweight reinforced thermoplastic in sandwich structure)
VW TL 52705: Polypropylene with Soft-Touch Haptic characteristics for vehicle interiors- material requirements material requirements for polypropylene (PP) components, used in vehicle interiors, that have stricter requirements concerning low gloss levels and special haptic characteristics
VW TL 52705: Polypropylene with Soft-Touch Haptic characteristics for vehicle interiors - material requirements material requirements for polypropylene (PP) components, used in vehicle interiors, that have stricter requirements concerning low gloss levels and special haptic characteristics
VW TL 52704: EPDM Body Seals - Material Requirements For body seals with and without surface coatings (antifriction coating, flocking, coextruded material, and film), e.g., for sealing of door systems, hoods, lids, tailgates, and sunroofs.
VW TL 52704: EPDM Body Seals - Material Requirements For body seals with and without surface coatings (antifriction coating, flocking, coextruded material, and film), e.g., for sealing of door systems, hoods, lids, tailgates, and sunroofs.
VW TL 52696: Velvet Velour for Floor Covering - Material Requirements Roll stock or sheet stock for formable vehicle floor carpets
VW TL 52696: Velvet Velour - Floor Covering Roll stock or sheet stock for formable vehicle floor carpets
VW TL 52694: Corrugated Tube - Material Requirements Non-slotted, media-carrying, corrugated tubes, e.g. in the positive crankcase ventilation system, the high-temperature positive crankcase ventilation system, the transmission breather, the fuel lines inside/on the fuel tank and the washer fluid hose
VW TL 52693: TPE Floor Mat Material Requirements Single-layer TPE floor mats (also referred to as "heavy-duty floor mats")
VW TL 52688: Polypropylene for Battery Boxes - Material Requirements For battery boxes made of PP or PP with 20% talc additive.
VW TL 52688: Polypropylene for Battery Boxes - Material Requirements For battery box ASSYs (housing and cover welded) made of PP or PP with at least 5% and as much as 20% talc additive.
VW TL 52685: Polyether PUR Lightweight Foam for Engine Compartment Absorbers - Material Requirements For both nondeformed PUR cut foam and nonwoven fabric-laminated molded parts made of PUR cut foam for use in the engine compartment.
VW TL 52682: PA66, glass fiber-reinfored, for finished parts carrying coolant - Material requirements for glass fiber-reinforced polyamide 66 (PA66) used in components carrying coolant
VW TL 52682: PA66, Glass fiber-reinfored, for finished parts carrying coolant - Material requirements for glass fiber-reinforced polyamide 66 (PA66) used in components carrying coolant
VW TL 52680: Components Made of Long-Fiber-Reinforced or Continuous-Filament-Reinforced Plastic Composites (FRP) - Materials and Component Requirements General material requirements for monolithic components made of long-fiber-reinforced or continuous-filament-reinforced plastic (fiber-reinÀforced plastics À FRP). - Structural components: e.g., stiff, load-bearing reinforcement components without an appe
VW TL 52675: Artificial leather - Material requirements Coated PUR and PVC artificial leather with knitted backing (as mainly in seat garments)
VW TL 52673: ASA + PA-polymer mixture Acrylonitrile-styrene-acrylate + polyamide polymer mixtures
VW TL 52671: PMMA, High Gloss Trims for the Exterior Black high-gloss finsihed parts made of PMMA for the exterior (e.g. A-, B- and C-pillar trims, trunk lid trim, etc.)
VW TL 52663: Radiator Grille with Bumper Integration for Increased Material Requirements - Test Scope for Material Data Sheets For radiator grilles with a thermoplastic design (e.g. PC+PET) which extend into the bumper area.
VW TL 52662: Molded Parts Made of Needle-Punched Nonwoven e.g. outer housing liners
VW TL 52662: Molded Parts Made of Needle-Punched - Material Requirements For molded parts made of needle-punched nonwoven, such as for outer wheel housing liners.
VW TL 52660: underbody applications, engine capsule, stone guard, CW Covers Thermoplastics, thermosets, thermoplastic elastomers
VW TL 52659: PVC artificial leather and PVC foam sheets in the solid composite with components of the vehicle interior
VW TL 52654: PVC synthetic leather, fabric reinforced PVC synthetic leather with polyester fabric reinforcement for load compartment cover (roller blind)
VW TL 52653: PUR-Flexible Foam for Vehicle Seats - Material Requirements Seat-system components of full-formed PUR foam
VW TL 52652: ASA and Polymer Blends, Material Requirements e.g., for unpainted trim panels and covers (interior trim)
VW TL 52652: ASA and PC Polymer Blends- Material Requirements e.g. for unpainted trim panels and covers ( interior trim)
VW TL 52649 - Wheel Housing Liner, Wheel Housing - Test Scope for Material Data Sheets Wheel housing liners and wheel housings made of thermoplastics
VW TL 52641: EPDM Body Seals - Quality Requirements for interior and exterior parts that are subjected to dynamic loads and manufactured from EPDM
VW TL 52639: Polypropylene, reinforced, impact, for instrument panel - Material requirements For elastomer and talc or mineral modified polypropylene fixed, for injection-molded instrument panel tops
VW TL 52637: Pillar Trim Panel ASSY and Scuff Plate For pillar trim panels and scuff plates ready for installation.
VW TL 52636: POM,Finished Parts (Not for Passenger Compartment) Material Requirements finished parts made of unfilled or non-reinforced polyoxymethylene (POM)
VW TL 52631: Bumper Covers, Spoilers PP + EPDM + PE - polymer mixture, talcum, pigmented, stabilized against heat aging and UV radiation.
VW TL 52631: Bumper Covers, Bumper Spoilers, and Diffusers - Material Requirements Bumper covers, spoilers (bumpers) and diffusers made of thermoplastics or thermosets (e.g., PP+EPDM+(PE) polymer blend with 10 % talc)
VW TL 52631: bumpers, bumper covers, spoilers, sill planking PP+EPDM+PE - Polymer mixture, talcum (10%)
VW TL 52628: Acoustic Trim panels in the Passenger Compartment as a Sandwich Composite of PES-Nonwoven / EPDM / PUR Formed parts made from sound insulation films or nonwovens for the purpose of sound insulation, in combination with lightweight PUR foam (polyurethane)
VW TL 52625: Plastic Front-end Carrier, Test Scope for Material Data Sheets Carriers made from thermoplastics and hybrid technology (e.g., glass fiber-reinforced PP, long glass fiber-reinforced PP, glass fiber-reinforced polyamide 6).
VW TL 52625: Plastic Front-end Carrier - Test Scope for Material Data Sheets Material requirements of carriers made from thermoplastics and hybrid technology (e.g., glass fiber-reinforced PP, long glass fiber-reinforced PP, glass fiber-reinforced polyamide 6).
VW TL 52623: PUR Floor Covering - Material Requirements
VW TL 52622: Thermoplastic Elastomers in combination with Thermoplastic for the Exterior e.g. the plenum panel cover, mirror triangle
VW TL 52622: Thermoplastic elastomers for the exterior - Test scope for material data sheets Thermoplastic elastomers combined with thermoplasts and the pure thermoplastic elastomer (TPE) applications used externally for finished parts. These include, for example, the plenum panel cover, mirror triangle, outer sill cover, water catching strip, ro
VW TL 52611 - Carpet Floor Mats - Material Requirements Floor mats in motor vehicle footwells
VW TL 52608: Fine Fiber Nonwoven Fabric, Multilayer - Materials Requirements For absorber nonwoven fabrics based on thermoplastic fibers, which are used, for example, for pillar trim sound insulation.
VW TL 52606: "Perforated" leather for defined air permeation For leather which has been perforated for a defined air permeation.
VW TL 52602: Polyurethane Foamed Plastic for Interior Trim - Material Requirements PUR foamed plastic for back-foaming floor carpets and acoustic sound damping systems in the spring-mass system for interior trim and components
VW TL 52499: Trim Panels Made of Molded, Thermoplastically Bonded Mixed Fiber Material, Material requirements Material requirements for trim panels made from a two-layer nonwoven such as, e.g. for trunk trims.
VW TL 52499 § 5.5.1 - Color fastness to abrasion (rotary abrasion test) Trim panels made of molded, thermoplastically bonded mixed fiber material - Material requirements; § 5.5.1: Color fastness to abrasion (rotary abrasion test - Schopper)
VW TL 52482 - Textile floor mats: Material requirements Textile floor mats
VW TL 52480: Plastic Fuel Tank, 6-Layer Coextrusion - Material Requirements For plastic fuel tanks produced using the 6-layer coextrusion blowing method.
VW TL 52478: Foam Coated fabrics, laminated - Material requirements Laminated Foamed Leatherette
VW TL 52476: POM, finished parts - Material requirements Finished parts of polyoxymethylene (POM)
VW TL 52476: POM, finished parts - material requirement For finished parts made of polyoxymethylene (POM), e.g. loudspeaker covers, and joining elements (clips).
VW TL 52475: ABS + PA6-Polymer blend - Material requirements Polymer blends of acrylic-butadiene-styrene and polyamide, from which in the injection molding process, for example, Steering column linings are made.
VW TL 52475: ABS + PA6 polymer blend - Material requirements ABS + PA6 polymer blend - Material requirements Polymer blends of acrylic-butadiene-styrene and polyamide, from which the injection molding process, for example, Steering column panels are made.
VW TL 52472: Polyolefins for floor coverings
VW TL 52472 § 3.5.14 - Color fastness to abrasion (rotary abrasion test) Polyolefins for floor coverings - Material requirements; § 3.5.14: Color fastness to abrasion (rotary abrasion test - Schopper): Staining of the rubbing cloth
VW TL 52468: Binding, Nubuck Appearance - Mateial Requirements Loop strap or binding for carpet floor mats acc. to Technical Supply Specification TL 52611
VW TL 52463: Polypropylene Multiwall Sheet Polypropylene Multiwall Sheet for e.g. cover plate for Group seat, reinforcement plate in trunk, cover for spare wheel well
VW TL 52452: Polypropylene with Increased Crystallization - Material Requirements Polypropylene with Increased Crystallization in the vehicle interior
VW TL 52451: Painting of Metallic Decorative Add-on Parts for the Exterior Paintwork on exterior add-on parts with metallic substrate that are in the visible area und thus must fulfil predominantly decorative and functional requirements, e.g. roof rails, wiper arms, step, styling bar, pillar trims, chrome-plated and sebsequently
VW TL 52448: Natural Fiber Molding Material, Therrmoplastically Bonded Natural Fiber Molding Material
VW TL 52448: Natural Fiber Molding Material thermoplastic-reinforced - Material Requirements Natural fiber molding material
VW TL 52447: Flocking of Interior Trim Material - Material Requirements Flocking of Interior Trim Material
VW TL 52442: Dilours Floor Covering - Material requirements For shape-retaining floor coverings made of two-layer nonwoven fabric.
VW TL 52440: PA6, fibre-glass reinfored, finished part, material requirements PA6, fibre-glass reinfored, finished part
VW TL 52440: PA6, fibre-glass reinfored, finished part, material requirements Not for new design and drawing changes
VW TL 52439: Polyamide tube, Material requirements Tubes made of polyamide 11 or polyamide 12, e.g. for Diesel fuel lines
VW TL 52437: Polycarbonate Headlamp Outer Lenses with Functional Coating - Materials Requirements Polycarbonate Headlamp Outer Lenses
VW TL 52435 § 6.7 - Resistance to leaching Fuel pipe, multilayer pipe - Resistance to leaching
VW TL 52428: Protective decorative film - Component requirements Decorative films that are used as protective decorative elements on mechanically stressed body surfaces
VW TL 52428 - Protective Decorative Film - Component Requirements Decorative Film
VW TL 52426: PC+ASA-Polymergemisch, Fertigteile - Werkstoffanforderungen Fertigteile aus PC/ASA-Polymergemisch. Nichtverwendungshinweis: Für Neukonstruktionen und Zeichnungsänderungen nicht mehr verwenden! Ersatz: TL 52652-A
VW TL 52423: Driver's Airbag Cover For the thermoplastic olefin blend for the cover of the airbag integrated in the steering wheel.
VW TL 52422: Trim Elements Made of Trilaminate, Material Requirements e.g. trunk side trim panel, wheel housing trim, trunk floor lining
VW TL 52411: Nonwoven Fabric, Thermoplastically Bonded - Material Requirements Unformed or essentially flat parts made of thermoplastically bonded nonwoven fabric, e.g. roof sound insulation, self-adhesive
VW TL 52394: Melamine Resin Foam Sound Insulation - Material Requirements For unmolded melamine resin foam and for nonwoven fabric-covered molded parts made of melamine resin foam for use in the engine compartment.
VW TL 52394: Melamine resin foam damping - material requirements undeformed melamine resin foam and fleece-laminated molded parts made of melamine resin foam for use in the engine compartment
VW TL 52388: Polypropylene for Use in the Vehicle Interior - Material Requirements For polypropylene used in trim components for the vehicle interior
VW TL 52388: Polypropylene for Passenger Compartments - Material Requirements Polypropylene in passenger compartment trims
VW TL 52388: Polypropylene for Passenger Compartments - Material Requirements Polypropylene in passenger compartment trims
VW TL 52382: PC/PBT - Blend, finished parts painted, material requirements e.g. bumper cover
VW TL 52350 - top material for Convertible - Material requirements Folding-top cloth for convertibles
VW TL 52345-3 (Material): EPDM Body Seals - Quality Requirements EPDM Body Seals ((in part, coated with bonded coating, functional coatings and flocking) for sealing of door systems and lids
VW TL 52345-3 (finished parts): EPDM Body Seals - Quality Requirements Body seals (in part, coated with bonded coating, functional coatings and flocking) for sealing of door systems and lids.
VW TL 52345 § 4.9.1 - Abrasion from a window glass pane edge EPDM Body Seals - Quality requirements; § 4.9.1: Wear resistance of paint coating, abrasion over window glass edge
VW TL 52323: Nonwoven Fabric Damping, Molded - Materials Requirements For molded nonwoven fabric damping, if applicable with heat shielding function in the engine compartment.
VW TL 52321: Wood Parts for Interior Trim - Material Requirements For decorative wood parts of the passenger car interior, such as trims, tray areas in the door side area, dashboard area, and center console area.
VW TL 52311: ASA-Graft Polymer, Finished Parts - Material Reqiurements ASA-Graft Polymer for Finished Parts
VW TL 52311: ASA Graft Polymer - Material Requirements ASA graft polymer for finished parts, e.g. radiator grilles
VW TL 52310: Microfiber Seat Cover Material and Decorative Material Microfiber materials for the vehicle interior trim
VW TL 52306: Carpet - Material Requirements for deformable motor vehicle floor carpets
VW TL 52296: Dashboard and other Foam-Backed Components - Material Requirements Dashboard and other Foam-Backed Components for the vehicle interior
VW TL 52296 § 2.1.4 - Resistance to agents (drop test) Dashboard and knee bar ASSY - Material requirements; § 2.1.4: Resistance to agents (drop test)
VW TL 52288: Polyamide, Mineral-Reinforced, Finished Parts, Material Requirements mineral-reinforced polyamide, e.g. for full wheel covers
VW TL 52288: Polyamide, Mineral-Reinforced, Finished Parts - Material Requirements Mineral-reinforced polyamide, e.g. for wheel trims
VW TL 52283: polypropylene, elastomer-modified, talc or mineral reinforced exterior components Finished parts made of PP, elastomer- and modified talc or mineral, e.g. insert parts / guides for bumper covers / bumper cooling air grille / door coverings
VW TL 52283: polypropylene, elastomer-modified, modified talc or mineral - Material requirements Precast polymer blends of ABS and PC
VW TL 52283 § 4.7 - Resistance to agents Polypropylene, elastomer-modified, talc - or Mineral-Modified - Material requirements; § 4.7: Resistance to agents
VW TL 52277: Impact-Resistant Modified Finished Parts Made of POM, Material Requirements finished parts made of impact-resistant, modified POM, e.g., pump accumulators and gravity valves
VW TL 52277: Finished Parts Made of Impact-Modified POM - Material Requirements e.g. pump reservoirs, gravity valves
VW TL 52254: Knitted foam, laminated - Material requirements For foam-laminated knit fabric to be used as trim for molded headlining ASSY or as cut and sew headliner.
VW TL 52254: Foam-Laminated Knit Fabric - Material Requirements For foam-laminated knit fabric taht is used as decorative material for molded headliner ASSYs (types: no sufix, A, C, D, E, F, G, H, I and L) or as cut and sew headliners (types: B, K and M)
VW TL 52231: ABS and PC Polymer Blends - Material Requirements For finished parts made of ABS and PC polymer blends, e.g., for instrument cluster trim panels, dashboards, and storage boxes.
VW TL 52231: ABS and PC Polymer Blends - Material Requirements Finished parts made of ABS and PC polymer blends, e.g. for instrument trims, dashboards, storage shelves etc.
VW TL 52226 - Molded Headlining ASSY, Lightweight Types - Material Requirements For ready-toinstall roof linings for passenger cars with a substrate weight per unit area of < 1,500 g/m_ (= lightweight type).
VW TL 52217: Plastic and elastomer components in the exterior - aging behavior due to artificial weathering Plastic and elastomer components in the exterior - aging behavior due to artificial weathering. The artificial weathering corresponds to two-year outdoor exposure in a dry and hot climate (eg Kalahari, South Africa and Arizona, USA) and a humid-warm clima
VW TL 52203: Polypropylene, wood flour filled - Material requirements
VW TL 52094: Trim Panel Load Compartment - Material Requirements e.g. Trunk floor mat
VW TL 52069: Lightfast Needle-Punched Nonwoven, Materials Requirements Lightfast PP needle-punched nonwoven and, as an alternative, PET needle-punched nonwoven, e.g. for coverings and rear shelfs
VW TL 52065: Elastomer Sealing Material Made of Cellular Rubber - Material Requirements For elastomer sealing material made of cellular rubber for molded or extruded products or damping material.
VW TL 52065: Elastomer Sealing Material Made of Cellular Rubber - Material Requirements For elastomer sealing material made of cellular rubber for molded or extruded products or damping material.
VW TL 52065 § 5.8 - Paint indifference, contact/ surrounding discoloration Elastomer sealing material made of cellular rubber - Material requirements § 5.8 Paint indifference
VW TL 52064: Leather, Material requirements, 6 types: A, C, G, D, E, F For leather used in the vehicle interior: seats, steering wheels, gearshift boots, leather-covered dashboards, other leather-covered interior components
VW TL 52064: Leather Material Requirements Leather used in the vehicle interior: seats, steering wheels, gearshift boots, leather-covered dashboards, other leather-covered interior components
VW TL 52062: PA 6.6, Glass Fiber Reinforced, for Finished Parts - Material Requirements glass fiber reinforced PA 6.6, e.g. for water tanks
VW TL 52057 § 4.5.3 - Separating force EPDM door seal with protective edging profile; § 4.5.3: Separating force
VW TL 52045: PUR-Integral Foam for Steering Wheel Coating - Material Requirements PUR-Integral Foam for Steering Wheel Coating
VW TL 52045: PUR Integral Foam for Steering Wheel Coating, Material Requirements
VW TL 52045-4.4 - Drop test PUR integral foam for steering-wheel coating - Material requirements; Tabel 2 point 4: Drop test
VW TL 52038: Labels - Self-Adhesive, Material Requirements Adhesive labels in teh interior and on the exterior of the vehicle
VW TL 52038: Labels - Self-Adhesive, Material Requirements Adhesive labels in the interior and on the exterior of the vehicle or in the engine compartment
VW TL 52035: PP/EPDM/PE-Polymer Blend, Finished Parts - Material Requirements PP/EPDM/PE-polymer blends or PP/EPDM-polymer blends for finished parts
VW TL 52035 § 5.14 - Resistance to test media PP / EPDM / PE polymer blend - Finished parts; § 5.14: Resistance against detergents and sealants (Resistance to test media)
VW TL 52018: Double-Sided Foam Adhesive Tape Adhesive bonding of add-on parts, e.g., protective side moldings and add-on parts with a two-component or multi-component structure (modular components such as trim components with inserts, multi-shell spoilers, or brackets bonded onto plastic body elemen
VW TL 52018: Adhesive Foam Tape, Adhesive-Coated on Both Sides - Material Requirements The adhesive foam tape described herein serves to fasten plastic add-on parts such as, e.g., side
VW TL 496: Door/Rear Side Trim Panel ASSY - Materials Requirements For ready-to-install door trim panels and rear side trim panels, including all add-on parts.
VW TL 496: Door and Rear Side Trim Panel ASSY - Material Requirements For door trim panels and rear side trim panels ready for installation, including all add-on parts.
VW TL 496 § 5.5 - Droplet test Door and side trim panel ASSY - Material requirements; § 5.5: Droplet test
VW TL 496 § 4.2.5 - Behavior against detergents Door and side trim panel ASSY - Material requirements; § 4.2.5: Behavior of decorative material to detergents (bleeding)
VW TL 496 § 3.15 (b) - Drop test Door and rear side trim panel ASSY - Material requirements; § 3.15b: Cleaning behavior of the surface materials, drop test
VW TL 496 § 3.15 (a) - Cleaning behavior with solvents Door and rear side trim panel ASSY - Material requirements; § 3.15a: Cleaning behavior of the surface materials, cleaning behavior with solvents
VW TL 496 § 3.14 - Resistance to cleaning agents (Staining) Door and rear side trim panel ASSY - Material requirements; § 3.14: Resistance to cleaning agents (Staining)
VW TL 481: PVC-Foam Film e.g. door and side trim panel
VW TL 428: Polyester Belt Webbing - Material Requirements
VW TL 292 - PVC films - Material requirements PVC films
VW TL 260: Paintwork of Metal Surfaces, Surface Protection Requirements Corrosion protection of black paint finishes on metal surfaces
VW TL 260: Paintwork of Metal Surfaces - Surface Protection Requirements Requirements for corrosion protection of black paintwork on metal surfaces
VW TL 256: Powder Coating on Metal Surfaces - Surface Protection Requirements
VW TL 244: Zinc/nickel alloy coatings - Surface protection requirements
VW TL 233: Non-Electrolytically Applied Zinc Flake Coatings with an Organic Top Coat - Surface Protection Requirements For surface protection types comprising non-electrically applied zinc flake coatings, with an additional organic top coat, on iron materials.
VW TL 227: Single-Layer Paint of Zinc-Coated Metal Surfaces - Surface Protection Requirements Surface protection requirements for organic coatings (single-layer liquid paint or cathodic electrocoating) on hot-dip-galvanized or electrolyticallygalvanized parts.
VW TL 227: Single-Layer Paint Coating of Zinc-Coated Metal Surfaces - Surface protection Requirements Surface protection requirements for organic coatings (cathodic electrocoating , KTL) on hot-dip galvanized and electro-galvanized parts
VW TL 226: Paintworks on Materials used in the Vehicle Interior Trim - Requirements Painted, pad-printed, heat-sealed, inmold decorated (IMD) and cubic-printed metallic and non-metallic materials, which are used in the vehicle interior.
VW TL 226: Paint Coating on Materials used in the Vehicle Interior Trim - Requirements Painted, pad-printed, heat-sealed, inmold decorated (IMD) and cubic-printed metallic and non-metallic materials, which are used in the vehicle interior.
VW TL 226 § 3.7.2 - Crosscut test (St. Andrew's cross) with adhesive tape pull-off Paint coating on materials used in the vehicle interior trim - Requirements; § 3.7.2: Adhesion and brittleness in initial condition, crosscut test
VW TL 226 § 3.13.3 / PV 3906 - Abrasion behaviour Paint coating on materials used in the vehicle interior trim - Requirements; § 3.13.3: Resistance to cleaning agents and synthetic sweat, abrasion behaviour
VW TL 226 § 3.13.2 - Drop test Paint coating on materials used in the vehicle interior trim - Requirements; § 3.13.2: Resistance to cleaning agents and synthetic sweat, drop test
VW TL 226 § 3.12.3.4 / PV 3906 - Abrasion behaviour, 2000 crockmeter strokes against dry cloth Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.4: Abrasion behavior, 2000 crockmeter strokes against dry cloth
VW TL 226 § 3.12.3.3 / PV 3906 - Abrasion behaviour, 100 crockmeter strokes against moist cloth (water) Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.3: Abrasion behavior, 100 crockmeter strokes against moist cloth (water)
VW TL 226 § 3.12.3.2 / PV 3906 - Abrasion behaviour, 100 crockmeter strokes against dry cloth Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.2: Abrasion behavior, 100 crockmeter strokes against dry cloth
VW TL 218: Body Color Multicoat Paint on Metallic Exterior Body Components e.g., bodywork or hang-on parts with multi-layer paint
VW TL 217: Zinc coatings for batch-galvanized components - Surafce protection requirements
VW TL 212: Oxide Coatings on Aluminum Parts - Surface Protection Requirements Anodic oxide protective coatings on parts made of pure aluminum and wrought aluminium alloys as well as for brake calipers made of cast alloys, for decorative applications (under moderate corrosion conditions) or technical / functional applications (under
VW TL 211: Paint Coatings on Exterior Plastic Parts Requirements for primer coat, single and multi-layer paint coatings acc. to color standard or custom color combination chart on plastic parts (body-mounted parts, e.g. bumper, wheel cover, rear spoiler, trunk lid, liftgate, fender, etc).
VW TL 211. Paint Coatings on Exterior Plastic Parts Requirements for primer coat, single and multi-layer paint coatings acc. to color standard or custom color combination chart on plastic parts (body-mounted parts, e.g. bumper, wheel cover, rear spoiler, trunk lid, liftgate, fender, etc).
VW TL 203: Galvanische Ni-Cr-Überzüge - Oberflächenschutzanforderungen Dekorative, galvanisch abgeschiedene Ni-Cr-Überzüge auf Teilen aus Stahl, Kupfer- und Aluminiumwerkstoffen sowie auf Zinkdruckguss mit den Schutzarten Ofl-f350, Ofl-f620, Ofl-f650
VW TL 203 § 3.4d - Resistance to temperature cycling Electroplated Ni-Cr coatings - Requirements for surface protection; § 3.4d: Resistance to temperature cycling
VW TL 203 § 3.4c - File test Electroplated Ni-Cr coatings - Requirements for surface protection; § 3.4c: File test
VW TL 1010: Materials for Vehicle Interiors - Burning Behavior, Material Requirements Flammability including the requirement for aging. Burning behavior of materials/ components in the passenger compartment.
VW TL 1010 - Burning behaviour Materials for vehicle interiors - Burning behavior, material requirements
VW QP R 015: Quality Requirements - Self-Adhesive Film Quality requirements for self-adhesive films for the protection of new vehicles during transport.
VW QP M050: Foam Used for Cavity Sealing, Quality Requirements
VW PV 5015 BR - Resistance to Hydrolisis Test Prescription - Resistance to hydrolisis in PU foams
VW PV 3987 - Scrubbing resistance (microscratch resistance) of high gloss surfaces Scrubbing resistance (microscratch resistance) of high gloss surfaces in the vehicle interior
VW PV 3983 - Stress crack resistance Total vehicle - media resistance of plastics and thermoplastic elastomers in conjunction with mechanical stresses
VW PV 3976 - Corrosion effect on copper Determining / evaluating the corrosion effect of elastomers on electrolyte copper
VW PV 3975 Draft - Abrasion resistance on high gloss surfaces VW Abrasion resistance on high gloss surfaces
VW PV 3975 - Scrub Resistance of High-Gloss Surfaces Abrasion resistance of high gloss surfaces in the vehicle interior
VW PV 3974 - Determination of the scratch inclination VW - Plastic Interieur parts. Determination of the scratch inclination on grained surfaces test of motor vehicle interior materials
VW PV 3973 - Tensile-Test Elastomer O-Rings - Determining tensile strenght, elongation at tear and stress values in the tensile test
VW PV 3971 - Adhesion at Low Temperatures Anti-Drumming Layers - Determination of the Adhesion at Low Temperatures
VW PV 3970 - Determination of the potential for mold growth Determination of the potential for mold growth
VW PV 3969 - Adhesion strenght Composite seat heating / adhesive tape / foam - Test of the adhesion strenght
VW PV 3968 - Soiling behaviour (Martindale method) Leather - Soiling behavior (Martindale method)
VW PV 3966 - White cracking properties (Ball drop test) PP Components - White cracking properties (Ball drop test)
VW PV 3966 - White cracking properties (Ball drop test) PP Components - White cracking properties (Ball drop test)
VW PV 3965 - Visual Color Matching Decorative Surfaces on and in the Vehicle - Visual Color Matching according to DIN EN ISO 3668
VW PV 3964: Surfaces in the Passenger Compartment - Testing of Cream Resistance coated surfaces in the passenger compartment
VW PV 3964 - Cream resistance Surfaces in the passenger compartment - Testing of cream resistance
VW PV 3961 - Hook-and-Loop test Upholstery Fabric - Velcro test
VW PV 3961 - Hook- and Loop test Trim Cover Material - Hook Fastener Test
VW PV 3959: Hydrolysis Test on Molded Headliners with Laminated Decorative Material in the Interior
VW PV 3959 - Storage in a desiccator Hydrolysis test on the roof liner with laminated interior dŽcor
VW PV 3958 - Determination of water tightness Textile floor mats - Water tightness
VW PV 3955 - Determination of the seam slippage resistance Upholstery cover material - Determining the seam slippage resistance of upholstery cover material: woven fabrics
VW PV 3952 - Scratch resistance Plastic interior components - Testing of scratch resistance (followed by colour measurement)
VW PV 3951 - Magnetic Adhesion Bitumen Films - Testing of Magnetic Adhesion
VW PV 3949 - Snag test (with abrasion chisel) Upholstery cover materials - Snag test
VW PV 3946 - Seam strength Upholstery material - Determination of the strength, resistance to tearing and shifting of seams
VW PV 3945 - Dynamic-Mechanical Analysis Elastomers and Thermoplastic Elastomers - Determining the Low-Temperature Flexibility with DMA
VW PV 3944 - Amine discoloration PVC-sun visor - Amine discoloration
VW PV 3942 - Determination of organic emissions Emission behavior of parts, components and semi-finished products for the vehicle interior - examination by the component chamber method
VW PV 3939 § 3.2 - Visual evaluation of extractable components Tubes in windscreen washer systems - Extractable components; § 3.2: Visual evaluation of extractable components
VW PV 3939 § 3.1.1 - Determination of extractable components Tubes in windscreen washer systems - Extractable components; § 3.1.1: Determination of extractable components using an extraction apparatus per Twisselmann
VW PV 3939 § 3.1 - Determination of extractable components Tubes in windscreen washer systems - Extractable components; § 3.1: Determination of extractable components using an extraction apparatus
VW PV 3937 - Amine emission (inidicator method) Amine emissions from PUR flexible foam - Indicator method
VW PV 3936: Polymer Materials - Testing the Resistance to Constituents of Blowby Gases For testing the resistance of polymer materials (in the form of finished parts and test plates, e.g., cylinder block and crankcase breather hoses, connecting hoses and pipes, intake hoses and pipes, seals, etc.) to constituents of blowby gases.
VW PV 3936: Polymer Materials - Testing the Resistance to Components of Blowby Gases Polymere Materials
VW PV 3935 (Py-GC-MS) Plastics and elastomers - Pyrolytic gas chromatography / Mass spectrometry
VW PV 3932 - Wear resistance of flocking (VW chisel test) Flocked plastic parts - Abrasion resistance
VW PV 3931 - Hardness test (Shore L) Hardness testing - PUR integral foam - Steering wheel rim
VW PV 3930 - Resistance to weathering (moist, hot climate, e.g. Florida) Non-Metallic materials - Weathering in moist, hot climate
VW PV 3930 - Resistance to weathering (humid, hot climate, e.g. Florida) Non-metallic materials - Weathering in humid, hot climate (Exterior)
VW PV 3929 - Resistance to weathering (dry-hot climate, e.g. Kalahari, Arizona, South America) Non-metallic materials - Weathering in dry, hot climate
VW PV 3929 - Resistance to weathering (dry-hot climate, e.g. Kalahari, Arizona, South America) Non- metallic materials - Weathering in dry, hot climate (Exterior)
VW PV 3928 - External pilling (Martindale procedure) Planar fabrics of the vehicle interior trim - Determination of external pilling on automobile upholstery fabrics
VW PV 3927 - Thermogravimetrical analysis (TGA) Thermogravimetric analysis for plastics and elastomers - Determination: Plasticizers, Carbon Black (TGA)
VW PV 3927 - Thermogravimetrical analysis (TGA) Thermogravimetric analysis for plastics and elastomers - Determination: Plasticizers, Carbon Black (TGA)
VW PV 3925 - Measuring emissions of formaldehyde Polymer materials - Measuring emissions of formaldehyde
VW PV 3925 (HPLC) - Formaldehyde and other carbonyls with HPLC
VW PV 3922 - Oil and water repelling behavior Planar fabrics and molded parts - Oil and water repelling behavior
VW PV 3920 (Fogging F) - Determination of the fogging characteristics (Fogging F) Nonmetallic materials for the interior - Determination of the fogging value (Fogging F)
VW PV 3919 - Compression stress determination Faservlies-Dämpfung - Bestimmung der Stauchhärte
VW PV 3909 - Static and permanent elongation Non metallic planar materials - Measurement of static and permanent elongation
VW PV 3908 - Rotary abrasion test (Schopper) Textiles, carpets - Wear resistance (Abrasive paper)
VW PV 3907 - Brush abrasion test Textiles - Brush abrasion test (Rotary abrasion machine)
VW PV 3906 - Abrasion behaviour Non-metallic planar fabrics - Testing of abrasion behavior
VW PV 3905 - Ball drop test Organic materials - Ball drop test
VW PV 3904 - Flame Retardance (Ageing storage) Interior trim materials - Flame retardance
VW PV 3903 - Flexural strength Non-metallic flat items - Measurement of flexural strength
VW PV 3900 (Variant 3) - Odour test Components in passenger compartment - Odor test; Variant 3: 80 °C / 2 h
VW PV 3900 (Variant 2) - Odour test Components in passenger compartment - Odor test; Variant 2: 40 °C / 24 h
VW PV 3900 (Variant 1) - Odour test Components in passenger compartment - Odor test; Variant 1: 23 °C / 24 h
VW PV 3549 - Environmental Vibration Endurance Test Environmental Vibration Endurance Test
VW PV 3427 - Elasticity test PUR-soft foam - Elasticity
VW PV 3366 - Wear characteristics of flocked material (VW chisel test) Elastomer seals - Wear characteristics of flocked material
VW PV 3363 - Testing of permanent deformation Elastomer seals - Testing of permanent deformation
VW PV 3362 - Resistance to Separation Testing of RWDR/IWDR - Examination of the Resistance to Separation of PTFE-Sealing element to Carrier
VW PV 3361 - Velcro closure test Upholstery materials - Wear and external pilling characteristics - Velcro closure test
VW PV 3361 - Hook fastener test Trim Cover Fabric - Wear and External Pilling Characteristics - Hook Fastener Test
VW PV 3360 - Determination of the fluffing behaviour (Random Tumble Pilling Tester) Upholstery materials - Determination of the fluffing behaviour
VW PV 3357 - Surface and edge flame exposure Insulating material - Behavior during flame exposure with a burner - Surface and edge flame exposure
VW PV 3356 - Soiling and cleanability behaviour Textiles and films - Soiling and cleaning behavior (Martindale-Verfahren)
VW PV 3355 - Migration staining PVC-parts contact heat storage
VW PV 3354 - Adhesion of the finish Testing of leather - Adhesion of the finish
VW PV 3353 - Soiling and cleanability behaviour Vehicle interior trim surfaces - Soiling and cleaning behavior
VW PV 3341-MS/FID - Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD) Non-metallic materials in automotiv interior trim - Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD)
VW PV 3340 § 4 - Tensile strength of the adhesive seam EPDM-profile, roof trims - Tests; § 4: Tensile strength of the adhesive seam of the additional seal for type golf A2
VW PV 3330 - Determination of compression set (Permanent deformation) Elastomer O-rings compression set (Permanent deformation)
VW PV 3314 § 3.5 - Tear strength between edge protection and hose or lip Edge protection with hose seal - Materials testing; § 3.5: Tear strength between edge protection and hose or lip
VW PV 3307 - Determination of plastic and elastic deformation Elastomer Components - Plastic and elastic deformability
VW PV 3305 § 3.1 - Ozone resistance Rubber vulcanizates - Testing of ozone resistance and permanent deformation
VW PV 3015 - Determination of the fogging characteristics (Fogging G) Non-metallic materials for interieur trim - Determining condensable constituents (Fogging G)
VW PV 3.3.3 - Scratch resistance Paint and varnishes - Scratch resistance testing of clear coats
VW PV 3.2.4 - Gloss measurement Paints and varnishes - Determining the reflectometer value according to DIN 67530
VW PV 3.17.1 - Stone impact resistance Paints and varnishes - Determination of Corrosion Resistance after Mechanical Damage
VW PV 3.14.7 - Stone impact test Paints and Varnishes - Test of Stone-chip Resistance according to DIN EN ISO 20567-1
VW PV 3.14.4 - Stone Impact Resistance (mobile Prüfung) Paints and varnishes - Mobile stone impact resistance test of body top coats
VW PV 3.12.1 - Oil resistance Paints and Varnishes - Testing of oil resistance
VW PV 3.11.3 - Resistance to diesel fuel Paints and Varnishes - Testing of resistance to diesel fuel
VW PV 3.11.2 - Resistance against FAM test fuel Paints and varnishes - Resistance test against FAM test fuel
VW PV 3.11.1 - Resistance to premium gasoline Paints and varnishes - Testing of resistance to premium gasoline
VW PV 3.10.7 - Testing for substances which disrupt the paint wetting Paints and varnishes - Testing for substances which disrupt the paint wetting
VW PV 3.10.7 - Testing for substances that impair paint wetting ability Paints and Varnishes - Testing for substances that impair paint wetting ability
VW PV 2037 - Resistance to preservaties and cleaning agents Plastic parts, metal-nonmetal bonds - Resistance to preservaties and cleaning agents
VW PV 2034 - Floating roller peel test (adhesion test) Non-metallic planar materials - Floating roller peel test
VW PV 2027 - Tensile load Test specification - Angular bonding - Strength test, tensile load
VW PV 2005-A - Climate cycle resistance; Variant A: single parts Vehicle parts - Testing of resistance to environmental cycle test; Variant A: single parts
VW PV 1503 - Steam jet test Paint coating of metallic an non-metallic materials - Pressure washer test
VW PV 1502 - Weathering (resistance to cracking) Clear coat for dual-layer metallic paint coatings - Testing for resistance to cracking
VW PV 1502 - Weathering (resistance to cracking) Clear coat for dual-layer metallic paint coatings - Testing for resistance to cracking
VW PV 1323 - Sun test Non-metallic materials - UV radiation on thermoplastic material, outside, in sun test
VW PV 1306 - Exposure test for determining the tackiness Non-metallic materials - Exposure test for determining the tackiness of polypropylene parts
VW PV 1303 - Light exposure test (100°C) Non-metallic materials - Exposure test of passenger compartment components
VW PV 1300 - Thermal stability test PVC and PVC mixed polymer - Thermal stability test
VW PV 1217 - Resistance to stone impact Paints and varnishes on plastics - Resistance to stone impact
VW PV 1210, modified - Corrosion climate cycle test Body and Add-On Parts/ Hang-on Parts
VW PV 1210 - Corrosion test Body and add-on parts - Corrosion test
VW PV 1210 - Corrosion test Body and add-on parts - Corrosion test
VW PV 1209 - Environmental corrosion cycle test Condensers, radiators, and charge air coolers made of aluminum alloys - Corrosion test (environmental corrosion cycle test)
VW PV 1200 - Resistance to environmental cycle test Vehicle parts - Testing of resistance to environmental cycle test (+80/-40) °C
VW PV 1065 - Potential differences and layer thicknesses of nickel coatings Chrome-Plated Surfaces - Determination of potential differences and layer thicknesses of nickel coatings
VW PV 1063 - Determination of Micropore Density Chrome-Plated Surfaces - Determination of Micropore Density
VW PV 1058 - Determination of chromium crack grid Chrome surfaces - Determination of chromium crack grid
VW PV 1021 - Determination of iron content Zinc-iron Alloy Coatings - Determination of iron content by ICP
VW PV 1015 § 3 - specific volume resistivity Contact corrosion from elastomers and plastics in contact with light alloys - examination of the volume resistivity
VW PV 1004 - Inherent stress condition Valve Armor - Examination of the residual stress state
VW EP 81020.16 - Screw tight fit ZSB Car body - Screw tight fit
VW Colour fastness to abrasion (rotary abrasion test) VW - Colour fastness to abrasion (rotary abrasion test - Schopper): Rating of staining on cotton fabric
VW 96380 variant 1 - Corrosion test Corrosion test - modified environmental cycle test
VW 96232 / PTL 8125: Vehicle Interior, Tufting Carpet for Floor Covering, Textile Covers, and Mats, Requirements and Tests
VW 80972 § 5.6 - Resistance to chemical agents Car radio - General requirements; § 5.6: Chemical requirements (resistance to chemical agents)
VW 80200-2 (Z-axis) - Vibration test with superimposed temperature cycle A (24 h)
VW 80200-2 (Y-axis) - Vibration test with superimposed temperature cycle B (8 h)
VW 80200-2 (X-axis) - Vibration test with superimposed temperature cycle B (8 h)
VW 80000 (LV 124): Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests For electric, electronic and mechatronic components and systems in motor vehicles up to 3.5 t.
VW 50195 § 3.2.1 Solid paint - color meassurement (CIELAB) Colorimetric Evaluation of Automobile Paint Coatings § 3.2.1 Solid paint
VW 50190: Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces Color and gloss measurement of chrom surfaces
VW 50190: Components of the Vehicle Interior Trim - Colorimetric Evaluation Color and gloss measurement
VW 50190 (Gloss) - Colourimetric evaluation Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces (here gloss)
VW 50190 (Colour) - Colourimetric evaluation Components of the vehicle interior trim - Colorimetric evaluation (here color)
VW 50190 (Colour) - Colourimetric evaluation Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces (here color)
VW 50185: Vehicle Parts - (Resistance to Open-Air Weathering) - only Short-term test methods / Laboratory testing Risk assessment of the resistance to open-air weathering of components of the vehicle interior, the vehicle skin, the engine compartment, and of add-on parts based on the short-term test methods in the laboratory testing (as part of the initial sample ins
VW 50181 (Fogging G) - Determination of the fogging characteristics (Fogging G) Lights with transparent cover - Fogging behaviour (Fogging G)
VW 50180: Components of the vehicle interior - emission behavior Evaluation criteria for use of low-emission materials and components in the passenger compartment and trunk as well as for parts that come into contact with air flowing into the passenger compartment.
VW 50136: PBT for finished parts outside of the vehicle interior Material requirements for unreinforced and glass fiber reinforced PBT in the engine, chassis and body
VW 50134: PA6 for Finished Parts Outside the Vehicle Interior - Material Requirements For glass fiber-reinforced and/or mineral-reinforced PA6 in the engine, chassis, gearbox, and body areas (without paint).
VW 50134: PA6 for Finished Parts Outside the Vehicle Interior - Material Requirements For glass fiber-reinforced and/or mineral-reinforced PA6 in the engine, chassis, gearbox, and body areas (without paint).
VW 50133: PA66 for Finished Parts Outside the Vehicle Interior - Requirements on Materials for non-reinforced, glass fiber-reinforced,
VW 50133: PA66 for Finished Parts Outside the Vehicle Interior - Material Requirements For glass fiber-reinforced and/or mineral-reinforced PA66 used in the engine, chassis, gearbox, and body areas (without paint).
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50131 - Sound Insulation Elements, Self-Adhesive - Adhesive Properties Bitumen/plastic, bitumen film, bitumen wool felt board for structure-borne sound insulation purposes; Nonwoven fabric, needle-punched nonwoven, felt, foam for airborne sound absorption purposes
VW 50129: Bonded Coating-Covered Body Seals Test methods for bonded coatings on elastomer seals in the body area
VW 50129 § 3.15 - Abrasion by means of abrasion cloth Bonded coating-covered body seals - Requirements and tests; § 3.15: Abrasion by means of abrasion cloth
VW 50129 § 3.13 - Abrasion from a window glass pane edge Bonded coating-covered body seals - Requirements and tests; § 3.13: abrasion from a window glass pane edge
VW 50127: Polyamide 66, Finished Parts in the Passenger Compartment - Material requrements interior door handles and other
VW 50125: Polyamide 6 for Finsihed Parts in the Vehicle Interior - Requirements on Materials Components made of PA6 with different levels of glass-fiber content or glass fiber and mineral blends in the vehicle interior
VW 50125: Polyamide 6 - Finished Parts in the Passenger Compartment - Material Requirements For inner door handles and other parts in the vehicle interior that are made from PA6 with different levels of glass fiber content or glass fiber and mineral mixtures.
VW 50123: Thermoplastic Elastomers - Quality Requirements For materials on the basis of thermoplastic elastomers (TPE) for motor vehicle components.
VW 50123: Thermoplastic Elastomers - Quality Requirements For materials on the basis of thermoplastic elastomers (TPE) for motor vehicle components.
VW 50123-4.5.2/6.1 (TGA) - Thermogravimetrical analysis (TGA) Thermoplastic elastomers - Quality requirements; § 4.5.2: Thermogravimetry (TGA)
VW 50105: Trim Cover Materials - Requirements, Quality Characteristics, Tests Upholstery Cover Materials - basic requirements
VW 50105 § 10.7 - Permanent set Upholstery cover materials - Requirements, quality specifications, tests; § 10.7: Permanent set (thickness of foam ? 8,0 mm)
VW 50105 - Upholstery Cover Materials - Requirements, Quality Specifications, Tests Upholstery Cover Materials - basic requirements
VW 50014: Interior - General requirements for components and semi-finished materials General requirements, temperature ranges and tests on all interior components: component deformation / alteration of the surface / changes in the material properties
VW 50014: Interior - General requirements for components and semi-finished materials General requirements, temperature ranges and tests on all interior components: component deformation / alteration of the surface / changes in the material properties
VW 44045: Polypropylene, Finished Parts - Material Requirements For finished parts made of polypropylene homopolymers and copolymers, non-reinforced and reinforced.
VW 44045: Polypropylene, Finished Parts - Material Requirements For finished parts made from polypropylene homopolymers and copolymers, non-reinforced and reinforced
VW 2.8.1: Elastomers - Materials Requirements and Testing elastomer materials used for components and technical molded parts in motor vehicles
VW 2.8.1: Elastomers - Materials Requirements and Testing elastomer materials used for components and technical molded parts in motor vehicles
VW 2.8.1: Elastomers - Materials Requirements and Testing For elastomer materials used for parts and technical molded parts in motor vehicles (it does not apply to vehicle tires).
VW 2.8.1 § 3.9 - Ozone Resistance Elastomer - Material requirements and inspections; § 3.9: Ozon resistance
VW 2.8.1 § 3.13 - Greasing Elastomers - Material requirements and inspections; § 3.13: Greasing
Vw TL 52629: Decorative Material for Trunk and Load Compartment Decorative material for trunk and load compartment
VW 50554 - Standard Atmospheres for conditioning Standard Atmospheres and Room Temperatures - Requirements on Standard Atmospheres
Volvo VCS 5715,1029 - Evaluation of degree of rusting Evaluation of degradation of paint coatings- Designation of degree of rusting
Volvo VCS 5712,1039 - Climate cycle test Thermal cycling test for electro-plated plastics
Volvo VCS 5712,1029 - Adhesion, file test Adhesion, file test (adhesion of metallic coating to basic metal)
Volvo VCS 5031,19 - original condition - Burning behaviour - original condition Flammability of interior materials (original condition)
Volvo VCS 5031,19 - after heat storage - Burning behaviour - after heat storage Flammability of interior materials (after heat storage)
Volvo VCS 5031,19 - after climate storage - Burning behaviour - after climate storage Flammability of interior materials (after climate storage)
Volvo VCS 1029,54739 - Adhesion test with folding knife Adhesion - Paints and enamels
Volvo VCS 1029,54729 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamels
Volvo VCS 1029,54729 - cross-cut test Adhesion, cross-cut test paints and enamels
Volvo VCS 1027,359 - Light fastness (black standard temperature 75 °C) Colour fastness to artificial light at 75 °C - Accelerated ageing of interior materials
Volvo VCS 1027,339 - Lichtechtheit Accelerated light exposure of exterior coatings
Volvo VCS 1027,3379 - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo VCS 1027,2769 - Organic emission (Test chamber procedure - Standard-emission testing) Determination of volatile organic substances from interior components / systems using a 1 m_ emission chamber - Organic materials
Volvo VCS 1027,2749 / VCS 1027,2759-MS/FID - Determination of organic emissions (TVOC-MS) Determination of organic emissions from non-metallic materials in vehicle interiors, Organic materials (TVOC-MS)
Volvo VCS 1027,2739 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo VCS 1027,2729, based on - Odour test Odour of trim materials in vehicles - Organic materials
Volvo VCS 1027,2729 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo VCS 1027,2719 (Fogging G) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials; Fogging G (gravimetrical)
Volvo VCS 1027,2719 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging - Organic materials; Fogging F (reflectometric)
Volvo VCS 1027,1449 - Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load) Accelerated corrosion test, version II - ACT II; cyclic atmospheric corrosion test with salt load
Volvo VCS 1027,1449 - Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load) Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load)
Volvo VCS 1027,0519 - Evaluation of degree of blistering Evaluation degrees for blistering of paints
Volvo VCS 1026,84349 - Colour fastness to rubbing (Veslic abrasion) Colour fastness to rubbing - Paints and enamels
Volvo VCS 1026,84329 - Colour fastness to rubbing Colour fastness to rubbing - Rubber, plastics and textiles
Volvo VCS 1026,82429 - Colour fastness to artificial light at 100 °C Organic materials - Colour fastness to artificial light at 100 °C
Volvo VCS 1026,82029 (ISO 105-A03) - Grey scale for assessing staining Grey scale for assessing staining
Volvo VCS 1026,82019 (ISO 105-A02) - Grey scale for assessing change in colour Grey scale - Determination of changes in colour
Volvo VCS 1026,81779 - Chemical resistance Chemical resistance - Paints and enamels
Volvo VCS 1026,81779 - Chemical resistance Test method - Chemical resistance - Paints and enamels
Volvo VCS 1026,5289 - Colour measurement Colour measurement of interior materials
Volvo VCS 1026,52729 - Gloss measurement (20°, 60°, 85°) Gloss - Paints and enamels
Volvo VCS 1026,51729 - Evaluation of colour Assessment of colour in light booth
Volvo VCS 1024,37219 - Tearing strength Tearing Strength - Textiles
Volvo VCS 1024,37169 - Tearing strength, crescent test pieces Rubber, vulcanized or thermoplatic - Tearing strength, crescent test pieces
Volvo VCS 1024,31139 - Scratch resistance with Erichsen pen Scratch resistance, Erichsen pen (Typ 318) - Organic materials
Volvo VCS 1024,28519 - Interlaminar strength Interlaminar strength - Soft laminates
Volvo VCS 1024,28439-B - Peeling strength (method B) Peeling strength - Laminated materials (method B: with weights)
Volvo VCS 1024,28439 - Peeling strength (method A) Peeling strength - Laminated materials (method A: with testing machine)
Volvo VCS 1024,21129 - Tensile properties Tensile strength and break elongation - Plastics
Volvo VCS 1022,23119 - Determination of thickness Test Method - Determination of thickness
Volvo TR 31833217 § 8.1.16 - Resistance to Sun Lotion Sun lotion test
Volvo TR 31830991: Technical Regulations Tunnel Console & Centre Stack Y283/Y352 Tunnel Console & Centre Stack
Volvo TR 31830991 § 6.1.16 Sun Lotion test - Resistance to Sun Lotion Resistance to Sun Lotion
Volvo TR 31827675: Door trim interior Y283/352
Volvo TR 31825672: Tunnel Module Y413
Volvo TR 31816382: Tunnel Console Y285/286/381/483 Tunnel Console
Volvo TR 23401404: GLU Plastic Cover GLU bracket, which is fixed to the seat
Volvo TR 22380624 § 5.9.2 - Abrasion resistance (symbols) Steering Wheel Switches § 5.9.2 Symbols
Volvo TC 88200001 - Sun tan lotion test Sun tan lotion test
Volvo TC 88100002 - Abrasion resistance against leather Abrasion resistance of soft and hard plastic surfaces
Volvo TC 85042802 - Resistance to stain removing agents Resistance to stain removing agents
Volvo TC 85000150 - Resistance to staining, soiling resistance and cleanability Substance soiling and cleanability for interior hard surfaces, coated fabrics and leather
Volvo TC 85000145 - Soiling and Cleaning Dye transfer by jeans fabric
Volvo TC 85000120 - Resistance to soiling and cleanability Resistance to soiling and cleanability of leather and tricot plastic
Volvo TC 85000035 - Fraying of seam Fraying of seam
Volvo TC 85000025 - Resistance against Velcro Resistance against Velcro for woven and knitted textiles (modified Martindale)
Volvo TC 85000020 - Crease test Crease test on foam laminated surface materials
Volvo TC 85000015 - Determination of the firmness of loops Determination of the firmness of loops in terry fabrics or other loop fabrics
Volvo TC 85000013 - Soiling and cleaning Soiling and cleaning of textile carpets
Volvo TC 85000011 § 6.3. - Resistance to aging after cleaning Evaluation of soil-repellent finishes on textile materials - the influence of aging on cleaned treated material
Volvo TC 85000011 § 6.2. - Resistance to cleaning Evaluation of soil-repellent finishes on textile materials - resistance to cleaning
Volvo TC 85000011 § 6.1. - Resistance to abrasion (Martindale) Evaluation of soil-repellent finishes on textile materials
Volvo TC 85000010-B - Soiling and cleaning behavior Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials.
Volvo TC 85000010-A - Resistance to staining, soiling resistance and cleanability Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials
Volvo TC 85000010 - Resistance to staining, soiling resistance and cleanability Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials
Volvo TC 85000006 - Resistance to pilling Resistance to pilling
Volvo TC 85000005 - Linting resistance Linting resistance (modified Martindale-procedure)
Volvo TC 80000003 - Soiling and cleaning Soiling and cleaning of plastic surfaces
Volvo TC 428.02 - Resistance to stain removing agent Resistance to stain removing agent - Surface material such as upholstery, leather, coated fabrics, etc.
Volvo STD 5715,102 - Evaluation of degree of rusting Evaluation of degradation of paint coatings - Designation of degree of rusting
Volvo STD 5712,104 - Adhesion, burnishing test Adhesion, burnishing test
Volvo STD 5712,102 - Adhesion, file test Adhesion, file test (adhesion of metallic coating to basic metal)
Volvo STD 5711,102-NSS - Salt spray fog test (NaCl solution) Corrosion test in artificial atmospheres - salt spray tests - Inorganic coatings; § 2.2.1: NSS test, NaCl solution
Volvo STD 5031,1 - original condition - Burning behaviour Flammability of interior materials (original condition)
Volvo STD 5031,1 - after heat storage - Burning behaviour Flammability of interior materials (after heat storage)
Volvo STD 5031,1 - after climate storage - Burning behaviour Flammability of interior materials (after climate storage)
Volvo STD 429-0003 (MS/FID) - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors (TVOC-MS) - Organic materials
Volvo STD 429-0002 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 429-0001 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo STD 423-0061 - Ligth exposure Light exposure at 75 °C - Accelerated colour fastness test of interior
Volvo STD 423-0055 - Heat storage Short-term heat resistance
Volvo STD 423-0047 - Colour fastness to artificial light at 100 °C Light exposure - Accelerated colour fastness test of interior materials
Volvo STD 423-0037 Method B - Colour fastness to rubbing Colour fastness to rubbing
Volvo STD 423-0037 Method A - Colour fastness to rubbing Colour fastness to rubbing
Volvo STD 423-0035 - Tensile strength of seams Tensile strength of seams - Organic materials
Volvo STD 423-0030 - Scratch resistance, Erichsen pen Scratch resistance, Erichsen pen - Organic materials
Volvo STD 423-0023 - Gloss measurement Gloss - Paints and Enamels
Volvo STD 423-0018 - Moisture resistance Moisture resistance in tropical cabinet - Chemical materials
Volvo STD 423-0014 - Accelerated corrosion test Accelerated corrosion test
Volvo STD 423-0012 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamel
Volvo STD 423-0011 - Chemical resistance (hot plate) Chemical resistance, hot plate - Paints and enamels
Volvo STD 423-0009 - Adhesion test with switchblade Adhesion - Paints and enamels, knife technique
Volvo STD 422-0005 - Resistance to soiling Resistance to soiling - Textiles
Volvo STD 420-0003 (Fogging G) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials (Fogging G, gravimetric)
Volvo STD 420-0003 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging - Organic materials (Fogging F, reflectometric)
Volvo STD 420-0002 - Evaluation of degree of rusting Evaluation of degradation of paint coatings - Designation of degree of rusting
Volvo STD 420-0001 - Evaluation of degree of blistering Evaluation degrees blistering of paints - Paints and enamels
Volvo STD 1211,16 - Plastic 91116
Volvo STD 1211,16 - Plastic 91116
Volvo STD 104-0001 - Burning behaviour Flammability (burning behaviour) of interior and exterior materials
Volvo STD 1029,5473 - Adhesion test with switchblade Adhesion - Paints and enamels
Volvo STD 1029,5472 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamel
Volvo STD 1029,3821 - Adhesive strength Coated fabric, Adhesive strength
Volvo STD 1027,337 - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo STD 1027,2714 / VCS 1027,2759-MS/FID - Determination of organic emissions (TVOC-MS) Determination of organic emissions from non-metallic materials in vehicle interiors - Organic materials (TVOC-MS)
Volvo STD 1027,2713 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 1027,2712 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo STD 1027,2711 (Fogging F) - Determination of fogging characteristics (fogging F) Fogging - Organic materials (Fogging F, reflectometric)
Volvo STD 1027,2623 - Vicat softening temperature Determination of the Vicat softening temperature of thermoplastics - Plastics
Volvo STD 1027,051 - Evaluation degrees of blistering Evaluation degrees blistering of paints - Paints and enamels
Volvo STD 1026,8432 - Colour fastness to rubbing Colour fastness to rubbing - Rubber, plastics and textiles
Volvo STD 1026,8243 - Lightfastness at 60 °C Light fastness 60 °C black panel temperature
Volvo STD 1026,8242 - Colour fastness to artificial light at 100 °C Organic materials - Colour fastness to artificial light at 100 °C
Volvo STD 1026,8202 (ISO 105-A03) - Grey scale for assessing staining Grey scale for assessing staining
Volvo STD 1026,8201 (ISO 105-A02) - Grey scale for assessing change in colour Grey scale - Determination of changes in colour
Volvo STD 1026,8177 - Chemical resistance Chemical resistance - Surface treatments
Volvo STD 1026,5272 - Gloss measurement (20°, 60°, 85°) Gloss - Paints and enamels
Volvo STD 1026,5172 - Determination of colour in colour-matching booth Determination of colour in colour-matching booth
Volvo STD 1024,7134 - Abrasion with brush Abrasion - Organic materials
Volvo STD 1024,7122 - Abrasion resistance, Martindale Abrasion resistance, Martindale - Fabrics
Volvo STD 1024,7122 - Abrasion Resistance, Martindale Abrasion resistance, Martindale - Fabrics
Volvo STD 1024,3725 - Tearing strength Tearing strength - Leather and artificial leather
Volvo STD 1024,3716 - Tearing strength (crescent test pieces) Tearing strength (crescent test pieces) - Rubber, vulcanized or thermoplastic
Volvo STD 1024,3712 (trouser-shaped specimen) - Determination of tear resistance Fabric coated with rubber or plastic - Determination of tear resistance (with trouser-shaped specimen)
Volvo STD 1024,3516/1eU (Charpy impact strength) - Determination of Charpy impact properties Determination of charpy impact strength (unnotched) of rigid materials - Plastics
Volvo STD 1024,3516/1eA (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Determination of charpy impact strength (notched) of rigid materials - Plastics
Volvo STD 1024,3113 - Scratch resistance with an Erichsen hardness tester Scratch resistance (with an Erichsen hardness tester) - Organic materials
Volvo STD 1024,2843-B - Peeling strength (method B) Peeling strength - Laminated materials (method B: with weights)
Volvo STD 1024,2843-A - Peeling strength (method A) Peeling strength - Laminated materials (method A: with testing machine)
Volvo STD 1024,2112 - Tensile properties Tensile strength and break elongation - Plastics
Volvo STD 1024,2111 - Tensile properties Tensile strenght -Plastics
Volvo STD 1024,1116 - Determination of compression set Compression set - Rubber material
Volvo STD 1023,7114 - Odour indication Odour indication - phenolic resin
Volvo NOTE-TREG 33396026: Technical Regulation Interior Deco, Wood & Aluminum
Volvo NOTE-TREG 31882925: Technical Regulation - Instrument Panel, Cluster 60
Volvo NOTE-TREG 31863927: Technical regulation Rear Seats Common V54X Rear Seats Common V54X
Volvo NOTE-TREG 31857341: Component Mats, Ruber/Plastic
Volvo NOTE-TREG 31856107: Technical Regulation Tunnel Console CMA K316 / V316
Volvo NOTE-TREG 31853178: Headlining
Volvo NOTE-TREG 31849323: TR Seating Commom - SPA Seating Common - SPA Projects: Front & Rear seat 2nd + 3rd row: XC90 / Front Seat: V54x, 516B, 516 H, V426, V43x ...
Volvo NOTE-TREG 31846481: Floor Carpet and NVH (Noise Vibration Harshness), Cluster 90
Volvo NOTE-TREG 31842862: Technical Regulation Unlaminated Textile OHS Pillar and Parcelshelf SPA, P519 & SPA2
Volvo NOTE-TREG 31842862: Technical Regulation Unlaminated Textile OHS Pillar and Parcelshelf SPA
Volvo NOTE-TREG 31841600: Technical Regulation Tunnel Console SPA#90
Volvo NOTE-TREG 31841454: Technical Regulation - Vinyl Tricot Plastic Moritz
Volvo NOTE-TREG 31838334: Technical Regulation - Laminated Textile Upholstery Laminated Textile Upholstery
Volvo NOTE-TREG 31824269: Technical Regulation Load Cover V542/V543/V426/K426/V432/V433
Volvo NOTE-DPR 31839243: Design Prerequisites - Interior door trims K316
Volvo NOTE TREG 33616565: Technical Regulation Interior Deco
Volvo NOTE TREG 31851389: Interior Deco & Uni Deco V426 - Wood, aluminium, chrome Interior decorative materials (unpainted/painted) made of wood, aluminium, chromefor
Volvo DP 31836991: Panorame Roof System
Volvo automobile testing (emissions)
VOC46505 LABKO - VOC emission Standard for Control of Volatile Organic Compounds Emission
VdL-RL 03 § 4.2 - Determination of the total formaldehyde concentration Guideline for the determination of the formaldehyde concentration in water based emulsion paints and related products; § 4.2: Determination of the total in-can-formaldehyde concentration with acidic steam distillation
VDI 4301-2 - Measurement of PCP and lindane with GC/MS Measurement of indoor air pollution - Measurement of pentachlorophenol (PCP) and y-hexachlorocyclohexane (lindane) - GC/MS method
VDI 4300-8 - Sampling of house dust Measurement of indoor air pollution - Sampling of house dust
VDI 3875 (Draft), based on - Polycyclic aromatic hydrocarbon Air pollution measurement - Measurement of indoor air - Measurement of polycyclic aromatic hydrocarbons (PAHs) - Gaschromatographic determination
VDI 3865 paper 3 - Determination of volatile organic compounds Measurement of organic soil pollutants - GC determination of volatile organic compounds in soil gas - Adsorption on activated charcoal and desorption with organic solvent
VDI 2467 Part 2 - Determination of amines Gaseous air pollution measurement - Measurement of the concentration of primary and secondary aliphatic amines by high-performance liquid chromatography (HPLC)
VDI 2464 Bl.1 - Measurement of polychlorinated biphenyls (PCBs) Ambient air measurement - Indoor air measurement - Measurement of polychlorinated biphenyls (PCBs) - GC/MS method for PCB 28, 52, 101, 138, 153, 180; Deviation to the Standard: GC-ECD instead of MSD
VDI 2464 / VDI 4300-2 / VDI 4300-4 / VDI 4301-3 - Sampling for PCB & PCP Sampling for PCB & PCP / lindane, indoor air; Ambient air measurement - Measurement of indoor air - Determination of polychlorinated biphenyls (PCBs), GC / MS method for PCB 28, 52, 101.138, 153, 180 / Measurement of indoor air pollution - Measurement str
VDI 2019 - Adhesion of thermoplastic elastomers (TPE) on substrates Testing the adhesion of thermoplastic elastomers (TPE) on substrates
VDA automotive test standards (emissions)
VDA 75202-B - Colour fastness and ageing behaviour to light (115 °C) Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Exposure condition A: 115 °C
VDA 75202-A - Colour fastness and ageing behaviour to light (100 °C) Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Exposure condition A: 100 °C
VDA 75202 (based on, BST 90 °C) - Colour fastness and ageing behaviour to light Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Based on: BST 90 °C
VDA 675-311 (DIN 53509-1) - Ozon resistance after 20 % elongation Elastomer components in automotive - Test method for durability test - Effect of ozon (following DIN 53 509)
VDA 675-310 - Heat aging - Heat aging Elastomer - Resistance - Heat aging
VDA 675-310 - Heat ageing Elastomer components in automotive - Test method for durability test - Heat ageing
VDA 675-301 - Exposure to test oils Elastomer components in automotive - Test method for durability test - Exposure to test oils
VDA 675-242-B - Paint indifference, method B: washout effect Elastomer components in automotive - Test methods for determination of characteristics - Discolouration of organic materials by elastomers (lacquer indifference), method B: wash-out effect
VDA 675-242-A - Paint indifference, method A: contact discoloration and environment discoloration due to migration Elastomer components in automotive - Test methods for determination of characteristics - Discolouration of organic materials by means of elastomers (Lacquer indifference), method A: contact discolouration and discolouration due to migration
VDA 675-241 - Corrosion effect on copper Elastomer components in automotive - Test methods for determination of characteristics - Corrosion effect on copper
VDA 675-218 - Determination of the plastic and elastic deformation Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Plastic und elastic deformation (permanent deformation)
VDA 675-217-B - Tension set (Method B: release 30 to 120 min after heat storage, return measurement after 30 min) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Tension set; Method B
VDA 675-217-A - Tension set (Method A: release directly after heat storage, return measurement after 30 min) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Tension set; Method A
VDA 675-216-B - Compression set (Method B: cooling in deformed state) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Compression set; Method B
VDA 675-216-A - Compression set (Method A: cooling in non-deformed state) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Compression set; Method A
VDA 675-211 (DIN 53507) - Tear strength test (strip specimen) Elastomer components in automotive - Test methods for property determination - Tensile stress-strain properties - Tear strength test (strip specimen), refers to DIN 53 507
VDA 675-210 (DIN 53515) - Tear strength test (according to Graves) Elastomer components in automotive - Test methods for property determination - Tensile stress-strain properties - Tear strength (Graves), refers to DIN 53 515
VDA 675-205 - Tensile properties Elastomer components in automotive - Test methods for determination of characteristics - Tensile stress-strain properties - Tensile test
VDA 675-202 (Shore A) - Determination of Shore A hardness Elastomer components in automotive - Test methods for determination of characteristics - Shore A, refers to DIN 53505
VDA 675-140 - Pyrolysis IR Elastomer components in automotive - Test methods for identification - Infrared spectroscopy analysis (IR), pyrolysis-IR
VDA 675-135 - Thermogravimetrical analysis (TGA) Elastomer components in automotive - Test methods for identification - Thermogravimetry, TGA
VDA 675-130 (950°C) - Determination of the ash content Elastomer components in automotive - Test methods for identification - Ash content without chemical treatment (950 °C)
VDA 675-125 - Determination of extractable components Elastomer components in automotive - Test methods for identification - Extractable components, extraction with Cyclohexane/Acetone
VDA 675-116 - Differential scanning calorimetry (DSC) Elastomer components in automotive - Test methods for identification - Coldness characteristics, differential scanning calorimetry (DSC)
VDA 675-106 (DIN 53479-A) - Determination of density Elastomer components in automotive - Test methods for identification - Density (immersion method; DIN 53 497, Procedure A)
VDA 621-427 - Stone chip resistance Stone impact resistance
VDA 621-424 (test media, BMW) - Abrasion resistance (test media, BMW) Technical paint tests - Abrasion resistance of coatings on plastics of motor vehicle interior trim (test media, BMW)
VDA 621-424 (dry) - Abrasion resistance (dry) Technical paint tests - Abrasion resistance of coatings on plastics of motor vehicle interior trim (dry)
VDA 621-415 - Corrosion test Technical paint tests - Examination of the corrosion protection of automotive coatings in cyclic alternating stress
VDA 621-412 - Resistance to chemicals Technical paint tests - Chemical restistance of motor vehicle painting
VDA 621-408 - Colour changes by simulated oil-soot exposure Technical paint tests - Examination of paints to colour changes by simulated oil-soot exposure
VDA 621-402 - Salt spray fog test Technical paint tests - Salt spray test on paints and similar coatings
VDA 280-3 - Color measurement of automotive finishes, uni-paint Colorimetry for motor vehicles - Color measurement of automotive finishes, uni-paint
VDA 280-2 - Colour measuring of textiles Colorimetry for motor vehicles - Colour measuring of textiles
VDA 280-1 - Colour measuring of plastic surfaces Colorimetry for motor vehicles - Colour measuring of plastic surfaces of interior materials for motor vehicles
VDA 278, based on - Organic substances and their emissions with TDS-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC- and FOG-Determination TDS-GC-MS-Screening)
VDA 278, based on (development) - Organic substances and their emissions with TDS-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC- and FOG-Determination TDS-GC-MS-Screening)
VDA 278 - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles
VDA 278 (Porsche) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (emission measurement using TDS-GC-MSD)
VDA 278 (Daimler) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (TDS-GC-MSD (2x VOC- + Fog-values))
VDA 278 (BMW) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC and FOG-determination TDS-GC-MS screening)
VDA 277-MS/FID - Determination of volatile organic compounds (TVOC with GC-MS/FID) Non-metallic materials for automotive interior trim - Determination of emissions of volatile organic compounds (TVOC-MS)
VDA 276-3 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m_ test cabinet; Part 3: Determination of total concentration of hydrocarbon compounds with a flame ionization detector (FID)
VDA 276-2 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m_ test cabinet; Part 2: Determination of emissions of Formaldehyde, ammonia and phenols after the equilibrium concentration method
VDA 276-1 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m_ test cabinet; Teil 1: Standard emission test
VDA 275 - Determination of formaldehyde emission Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method
VDA 275 (HPLC) - Determination of the emission of selected analytes by the flask method Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method; measurement with HPLC
VDA 270 / acc. to DBL 5430 Appendix A - for leather - Odour test Determination of the odour characteristics of trim materials in motor vehicles - according to DBL 5430 Appendix A - Supplement to VDA 270 - for leather
VDA 270 (Variant 5 - leather, without water) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (Variant 5)
VDA 270 (Variant 4 - leather, with water) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (Variant 4)
VDA 270 (Variant 3) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 3)
VDA 270 (Variant 3) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 3)
VDA 270 (Variant 2) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 2)
VDA 270 (Variant 2) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 2)
VDA 270 (Variant 1) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 1)
VDA 270 (Variant 1) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 1)
VDA 237-101 (appendix 3) - Ball drop test Test procedures for foils and artificial leather; Appendix 3: Ball drop test
VDA 237-101 (appendix 1) - Handle impression distance measurement Test procedures for foils and artificial leather; Appendix 1: Grip indentation measurement
VDA 233-102 - Corrosion testing Cyclic corrosion testing of materials and components in automotive construction
VDA 230-223 - Compatibility with Amines Plastic sheets for automotive interior trim - Compatibility with amines
VDA 230-221: Leather for steering wheels and leather wrapped steering wheels - Test methods and requirements Steering wheel leather and leather wrapped steering wheels
VDA 230-220 test without seam in the middle - Mace Snag Test Textiles for the automotive interiors - Determining the thread puller tendency of textiles - Mace Snag test; § 8.1: Test without test seam in the middle
VDA 230-220 test with seam in the middle - Mace Snag Test Textiles for the automotive interiors - Determining the thread puller tendency of textiles - Mace Snag test; § 8.1: Test without test seam in the middle
VDA 230-219-Z - sun simulation (cycle testing) Ageing of automotive components in solar simulation units (cycle testing)
VDA 230-219-D - Sun simulation (long term testing) Ageing of automotive components in solar simulation units (long term testing)
VDA 230-218 - Scratch resistance with a chisel Plastic sheet products for automobile interior trim - testing the scratch resistance - plowing
VDA 230-217 (Method B) - Ball impact test Plastic Roll Goods for Motor Vehicel Interior Trim - Test of Low Temperature Resistance; Method B: Ball impact test
VDA 230-212 - Soiling and cleanability (modified Martindale method) Leather, plastic roll stock and textiles for use in vehicles - Determining the soiling and cleaning properties process - procedure soiled fabric
VDA 230-211 - Abrasion Test Abrasion Test on Leather - Determination of the abrasion resistance of leather surfaces using the Martindale abrasion testing apparatus and a ball plate
VDA 230-210 - Hook and loop fastener test Upholstery fabric - Hook and loop fastener test
VDA 230-209 - Flexural properties Leather, plastic roll stock and textiles for motor vehicle - Determination of flexural properties
VDA 230-208 - Hydrolytic resistance Leather and plastic roll stock for motor vehicle interior trim - Hydrolytic aging (aging in desiccator or preserving jar)
VDA 230-208 (Draft) - Hydrolysis weathering Leather and plastic sheeting for vehicle interior trim - Hydrolysis ageing (Storage in desiccator or preserving jar)
VDA 230-206 Part 3 - Stick-slip-behavior (plastic web) Examination of the stick-slip-behavior of testing of material pairs - Part 3: Plastic web
VDA 230-206 Part 2 - Stick-slip behaviour (Leather) Examination of the stick-slip behaviour of material pairs - Part 2 Leather
VDA 230-205 Method B - Determination of the loose-grain effect Leather for Automobile interior trim - Determination of the lose-grained effect of laminated leather
VDA 230-205 Method A - Determination of the loose-grained effect Leather for Automobile interior trim - Determination of the lose-grained effect of unlaminated leather - Method A
Vacuum drying Vacuum drying
US-EPA 8260 B - Determination of volatile organic compounds Volatile organic compounds by gas chromatography/ mass spectrometry
UL 94 V - Burning behaviour - vertical UL Standard for Safety Test for Flammability of plastic materials for parts in devices and appliances - vertical burning test
UL 94 HB - Burning behaviour - horizontal UL Standard for Safety Test for Flammability of plastic materials for parts in devices and appliances - horizontal burning test
TSKF TS420-00-033 - Determination of VOC's from interior components The VOC emission test method
TSKF TS420-0-32 Method A - Fogging test (reflectometric) Test method & Quality standard for the fogging property
TSKF TS420-0-02 - Burning behavior Flammability test method
TRIAS 20-J027-01 - Burning test Test for Flame-Resistance Interior Materials
Traction-Adhesive Strength Test
TPJLR.52.714 - Moisture Absorption Jaguar Cars & Land Rover: Moisture Absorption
TPJLR.52.712 - Resistance to Blocking Resistance to Blocking
TPJLR.52.709, Methode B - Ball drop test (method B: steel ball) Jaguar Cars & Land Rover: Resistance to low temperature impact, method B (Steel ball)
TPJLR.52.709, Method A - Ball drop test (method A: rubber ball) Jaguar Cars & Land Rover: Resistance to low temperature impact, method A (Rubber ball)
TPJLR.52.561 Method A - Resistance to high pressure cleaning operations Jaguar Cars & Land Rover: Resistance of painted exterior parts to high pressure cleaning operations
TPJLR.52.458 - Odour test Jaguar Cars & Land Rover: Determination and assessment of odour from interior trim materials, components and assemblies
TPJLR.52.453 - Determination of white cracking and creasing Polymeric film resistance to white cracking and creasing
TPJLR.52.452 - Resistance to Curling Jaguar Cars & Land Rover: Resistance to curling
TPJLR.52.423 - Determination of Surface Fibre deterioration after Ultraviolet Radiation Jaguar Cars & Land Rover: Determination of surface fibre deterioration (after ultraviolet radiation)
TPJLR.52.419 - Load deflection and load loss Jaguar Cars & Land Rover: Load deflection and load loss of foam covered trim components
TPJLR.52.417 - Seam strength Determination of seam strength of textile trim materials
TPJLR.52.414 - Seam Fatigue Jaguar Cars & Land Rover: Seam fatigue of interior trim
TPJLR.52.356 - High Heat & Humidity Ageing (climate cycle) Jaguar Cars & Land Rover: High heat & humidity ageing (climate cycle)
TPJLR.52.353 - Accelerated Environmental Ageing Jaguar Cars & Land Rover: Accelerated environmental cycling
TPJLR.52.352 - Resistance to heat ageing Jaguar Cars & Land Rover: Resistance to heat ageing
TPJLR.52.351 - Resistance to humidity Jaguar Cars & Land Rover: Resistance to humidity
TPJLR.52.351 - Resistance to humidity Jaguar Cars & Land Rover: Resistance to humidity
TPJLR.52.302 - Determination of elongation and tension set Jaguar Cars & Land Rover: Determination of elongation and tension set
TPJLR.52.301 - Dimensional stability under humidity Jaguar Cars & Land Rover: Dimensional stability under humidity and dry heat, Index I: Procedure for humidity
TPJLR.52.301 - Dimensional stability under dry heat Jaguar Cars & Land Rover: Dimensional stability under humidity and dry heat, Index J and K: Procedure for dry heat
TPJLR.52.212 - Resistance to suntan lotion Resistance to sun cream staining
TPJLR.52.211 - Soiling behavior of seating leather Susceptibility of leather to soiling
TPJLR.52.210 - Cleanability Test Jaguar Cars & Land Rover: Cleanability test for interior trim materials
TPJLR.52.209 - Resistance to Migration Staining Jaguar Cars & Land Rover: Resistance to migration staining using white, unsupported vinyl
TPJLR.52.207 - Resistance to Migration Staining Jaguar Cars & Land Rover: Resistance to migration staining using multi fibre cloth
TPJLR.52.205, Methode C - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method C (composite material)
TPJLR.52.205, Method D - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method D
TPJLR.52.205, Method C - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method C (seat foams)
TPJLR.52.205, Method B - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method B (polyurethane foam)
TPJLR.52.205, Method B - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method B (polyurethane foam)
TPJLR.52.205, Method A - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method A (polymer foils, PVC and leather)
TPJLR.52.205, Method A - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method A (polymer foils, PVC and leather)
TPJLR.52.203 - Resistance to white marking Jaguar Cars & Land Rover: Resistance to white marking (45 ° bending)
TPJLR.52.202 - Soiling and cleanability Jaguar Cars & Land Rover: Susceptibility of trim material to dye ingress
TPJLR.52.202 - Soiling and cleanability Jaguar Cars & Land Rover: Susceptibility of trim material to dye ingress
TPJLR.52.201 - Soiling and Cleanability Jaguar Cars & Land Rover: Soiling and Cleanability of Trim Materials
TPJLR.52.160 - Resistance to Exterior Transit Protection Materials Jaguar Cars & Land Rover: Resistance to exterior transit protection materials
TPJLR.52.156 - Resistance to Perspiration Jaguar Cars & Land Rover: Resistance of interior trim to perspiration - Immersion test
TPJLR.52.156 - Resistance to Perspiration Jaguar Cars & Land Rover: Resistance of interior trim to perspiration - Immersion test
TPJLR.52.155 - Fluid Spotting Jaguar Cars & Land Rover: Fluid spotting of automotive trim
TPJLR.52.154 - Resistance to fuel Jaguar Cars & Land Rover: Determination of plastic component resistance to fuel
TPJLR.52.107 - Determination of VOC's from interior components Jaguar Cars & Land Rover: Determination of VOC's from interior components and systems using a 1 m_ emission chamber
TPJLR.52.104 - Determination of volatile organic compounds (VOC emissions) Determination of VOC (and Carbonyl) Emissions for Interior Trim Materials
TPJLR.52.061 - Paint Adhesion Jaguar Cars & Land Rover: Paint adhesion test method
TPJLR.52.058 (Procedure 2) - Adhesive Bond Strength (180 °) Jaguar Cars & Land Rover: Adhesive bond strength - Procedure 2: 180 degree peel method
TPJLR.52.056 - Foam adhesion to Flexible & Rigid Substrates (Scraper Method) Jaguar Cars & Land Rover: Determination of foam adhesion to flexible & rigid substrates (Scraper Method)
TPJLR.52.004 - Resistance to Scratch Jaguar Cars & Land Rover: Resistance to scratch
TPJLR.52.001 - Abrasion Resistance Jaguar Cars & Land Rover: Abrasion Resistance of Textile Fabrics
TPJLR 52.564 - Water immersion test Water Immersion Test For Painted Parts And Panels
TPJLR 52.554 - Corrosion Test Prohesion Corrosion Test
TPJLR 52.360 - Climate cycle test Accelerated Environmental Ageing for Adhesives Used in Trim Applications
TPJLR 52.252 - Salt spray test Resistance To Neutral Salt Spray Corrosion Testing
Toyota TSM7516G: Materials for the label transferred by heat press Materials for labels which are adhered to the surfaces of sun visor skin (fabric, PVC, flocking) and vanity mirror cover (polypropylene resin) by means of heat transfer.
Toyota TSM7100G: General tets method for polyurethane foams polyurethane foams used mainly for automotive seat pads and safety pads
Toyota TSM6634G § 5.7.1 and § 5.7.2 - Colorfastness to crocking Colorfastness to crocking (dry/wet) by using the Gakushin-type friction tester
Toyota TSM5514G: Polypropylene resin molding materials
Toyota TSM1720G: Materials for door glass run
Toyota TSM1500 G: Rubber materials
Toyota TSM0501G § 9.3 - Bending Test Standard test methods for plastic molding materials - § 9.3 Bending Test (Three-point Bending Test)
Toyota TSM0501G § 9.2 - Tensile Test Standard test methods for plastic molding materials - § 9.2 Tensile Test
Toyota TSM 7100G § 4.4 - Stress relaxation test Test foams; Spannungsrelaxationstest of polyurethane foams
Toyota TSM 7100G § 4.3 - Compression load test Testing of cellular material; Compression load test on polyurethane foam; (Veränderung der Elastizität nach mehrmaliger Belastung)
Toyota TSM 7100G § 4.2.1 - Hardness (at default indentation distance) Testingcellular material; hardness test on polyurethan foam; (Indentation force at default indentation distance)
Toyota TSM 6734G: Safety pad materials with thermoplastic polyurethane (TPU) cover for slush molding covering materials, pad materials (compound) and PUR foam materials of the safety pad for instrument panels which is made by injecting and foaming PUR in the thermoplastic PUR cover for slush molding (hereinafter referred to as "safety pad")
Toyota TSM 5746G: Thermoplastic elastomer materials of moldings for exterior use Thermoplastic elastomer materials of moldings for exterior use
Toyota TSM 5708G: Elastomer Modified Polypropylene Resin Molding Materials For Exterior Parts General properties of elastomer modified polypropylene resin molding materials used for automotive plastic bumpers.
Toyota TSM 5601 G: Composite reinforced polypropylene moulding materials
Toyota TSM 5515 G: Polyacetal resin molding materials (POM) General properties of polyacetal resin molding materials used for automotive plastic parts. (POM)
Toyota TSM 0509 G - Analysis of emissions of volatile substances by heat extraction and gaschromatography Test method for measuring volatile substances under heat desorption method (based on VDA 278)
Toyota TSM 0508 G - Determination of volatile components Volatile component measurement method using sampling bag, Emissions
Toyota TSM 0506G § 3.3 (Charpy impact) - Determination of Charpy impact properties at low temperatures Standard Test Methods for Plastic Molding Materials for Compliance with ISO
Toyota TSM 0506G - Determination of temperature of deflection under load Standard test methods for plastic molding materials for compliance with iso
Toyota TSM 0505 G § 8.3 Water extraction - Odour test Toyota, Smell quality of non-metallic materials Point 8.3 smell water extraction test for single parts
Toyota TSM 0505 G § 8.2.2 - Odor test (with water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials; § 8.2.2: with water, after ageing 96 h / 80 °C
Toyota TSM 0505 G § 8.2.1 - Odor test (with water, initial smell) Smell quality of non-metallic materials; § 8.2.1: with water, initial smell
Toyota TSM 0505 G § 8.1.2 - Odor test (without water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials; § 8.1.2: without water, after ageing 96 h / 80 °C
Toyota TSM 0505 G § 8.1.1 - Odor test (without water, initial smell) Smell quality of non-metallic materials; § 8.1.1: without water, initial smell
Toyota TSM 0503 G - B (reflectometric) - Fogging test Fogging test method for non-metallic materials; § 3.2.2a: Fogging F (method B, reflectometric)
Toyota TSM 0503 G - B (reflectometric) - Fogging test Fogging test method for non-metallic materials - Method B (reflectometric)
Toyota TSM 0503 G - B (gravimetric) - Fogging test Fogging test method for non-metallic materials; § 3.2.2b: Fogging G (method B, gravimetrical)
Toyota TSM 0503 G - B (gravimetric) - Fogging test Fogging test method for non-metallic materials - Method B (gravimetric)
Toyota TSM 0502G: General test method regarding material properties for plastic parts For plastic molded parts to be used in automobiles.
Toyota TSM 0502G: General test method regarding material properties for plastic parts For plastic molded parts to be used in automobiles.
Toyota TSM 0502G § 4.1.1 (B) - Heat storage with infrared radiation General test method regarding material properties for plastic parts, § 4.1.1 Method B
Toyota TSM 0501G: Standard test methods for plastic molding materials
Toyota TSM 0501 G § 9.9.2 (Shore D) - Determination of Shore D hardness Standard test methods for plastic molding materials § 9.9.2 Shore D hardness measurement
Toyota TSM 0501 G § 9.9.2 (Shore A) - Determination of Shore A hardness Standard test methods for plastic molding materials § 9.9.2 Shore A hardness measurement
Toyota TSM 0501 G § 9.8 - Vicat softening temperature Standard test methods for plastic molding materials § 9.8 Vicat softening point measurement test
Toyota TSM 0501 G § 9.4.2 - Determination of Charpy impact resistance (notchless) Standard test methods for plastic molding materials § 9.4.2 Charpy impact test (notchless)
Toyota TSM 0501 G § 9.4.2 - Determination of Charpy impact resistance (notched) Standard test methods for plastic molding materials § 9.4.2 Charpy impact test (notched)
Toyota TSM 0501 G § 9.4.1 - Determination of Izod impact resistance (notchless) Standard test methods for plastic molding materials § 9.4.1 Izod impact test (notchless)
Toyota TSM 0501 G § 9.4.1 - Determination of Izod impact resistance (notched) Standard test methods for plastic molding materials § 9.4.1 Izod impact test (notched)
Toyota TSM 0501 G § 9.23 - Adhesive strength (electro-plated surface) Standard test methods for plastic molding materials § 9.23 Electro-plated surface adhesion strength measurement test
Toyota TSM 0501 G § 9.22 - Paint film adhesion (cross cut test) Standard test methods for plastic molding materials § 9.22 Paint film adhesion measurement test
Toyota TSM 0501 G § 9.20 - Accelerated weather resistance test Standard test methods for plastic molding materials; § 9.20: Accelerated weather resistance test (light resistance)
Toyota TSM 0501 G § 9.10 - Melt mass-flow rate (MFR) Standard test methods for plastic molding materials § 9.10 Melt index measurement test
Toyota TSM 0500 G - Burning behaviour Flammability test method for interior non-metallic materials
Toyota TSL5101G & 3.29 - Crease-Flex Resistance Crease-Flex Resistance Test
Toyota TSL3509G: Low elastic felt materials for silencer Silencer pad materials used as sound insulating material for automotive lining
Toyota TSL 5101 G § 3.7 - Seam fatigue test § 3.7: Seam fatigue test
Toyota TSL 5100 G: General test methods for vinyl leathers Test methods for vinyl leathers used mainly for automobile interior trim materials.
Toyota TSL 5100 G § 4.19.2 (Method B: Xenon Lamp) - Light fastness High-temperature light fastness test
Toyota TSL 5100 G § 4.10 - Tack free test General test methods for vinyl leathers; § 4.10: Tack free test
Toyota TSL 3610G: Molded head lining cover materials Automotive molded head lining cover materials except TPO cover materials
Toyota TSL 3600 G: Carpet Materials Carpet
Toyota TSL 3600 G § 7.4 - Tear strength Test methods for carpet materials for automobiles; § 7.4: Tear strength - by the Tongue (single rip) procedure
Toyota TSL 3600 G § 7.3 - Grab tensile properties Test methods for carpet materials for automobiles; § 7.3: Tensile strength - Determination of maximum force using the grab method
Toyota TSL 3600 G § 7.2 - Thickness Test methods for carpet materials for automobiles; § 7.2: Thickness
Toyota TSL 3600 G § 7.13.2 (Method B) - Colour fastness to dry crocking Test methods for carpet materials for automobiles; § 7.13.2: Color fastness to dry crocking (method B)
Toyota TSL 2106 G § 4.8.2 (Method B) - Colour fastness to light Standard test methods for seat fabrics; § 4.8.2: Colorfastness to light at high temperature - Method B: Xenon Lamp (Atlas Ci35W or equivalent)
Toyota TSL 2100 G § 4.18 - Taber Abrasion (Wear resistance) Standard test methods for woven fabrics and knitted fabrics; § 4.18: Taber Abrasion
Toyota TSL 1600 G: Specification for polyester threads for seat sewing Polyester threads for seat sewing
Toyota TSL 1600 G § 4.6 - Stretch elasticity test Specification for polyester threads for seat sewing; § 4.6: Stretch elasticity test
Toyota TSL 1600 G § 4.5 - Loop strength test Specification for polyester threads for seat sewing; § 4.5: Loop strength test
Toyota TSL 1600 G § 4.4 (Method B) - Colour fastness to crocking Specification for polyester threads for seat sewing; § 4.4: Color fastness to crocking (method B), dry and with perspiration solution
Toyota TSL 1600 G § 4.3.1 - Color fastness and ageing Specification for polyester threads for seat sewing; § 4.3.1: Color fastness and ageing
Toyota TSL 1600 G § 4.3.1 (Method A) - Color fastness to light Specification for polyester threads for seat sewing § 4.3.1 Test on colorfastness to light Method A Xenon Lamp
Toyota TSL 1600 G § 4.2 - Tensile properties yarn Specification for polyester threads for seat sewing § 4.2 Tensile strength and elongation
Toyota TSL 1600 G § 4.2 - Tensile properties Specification for polyester threads for seat sewing; § 4.2: Tensile strength and elongation
Toyota TSL 1600 G § 4.1 - Determination of linear density (conditioned size) Specification for polyester threads for seat sewing; § 4.1: Conditioned size (Yarn count)
Toyota TSL 0601 G - Light resistance (method E) Criteria for test for quality of color change by aging, method E
Toyota TSL 0601 G (Xenon arc) - Light resistance Criteria for test for quality of color change by aging (methods B - G)
Toyota TSL 0601 G (Carbon arc) - Light resistance Criteria for test for quality of color change by aging (method A)
Toyota TSK6712G: Sealing foams for interior trims Foam sealing material (hereinafter called "foam") chiefly used to seal interior duct-related parts of automobiles
Toyota TSK 5705 G: Pressure sensitive adhesive double coated tape for exterior parts For bonding exterior parts (for example, side protection molding, bumper molding, marks, etc.)
Toyota TSK 5705 G: Pressure sensitive adhesive double coated tape for exterior parts
Toyota TSH 3130 G: Paint Quality For Interior Parts For decorative coatings and prints on automotive interior parts
Toyota TSH 3130 G: Paint Quality For Interior Parts For decorative coatings and prints on automotive interior parts
Toyota TSH 3130 G § 4.17 (1) - Light fastness (Carbon arc method) Paint quality for interior parts - Accelerated ligth resistance - (1) Carbon arc method
Toyota TSH 1564 G -Methode B gravimetric measurement - Fogging Characteristics Fogging test method for interior painted parts - Method B, gravimetric procedure
Toyota TSH 1564 G - Method B (reflectometric procedure) - Fogging Characteristics Fogging test method for interior painted parts - Method B, reflectometric procedure
Toyota TSH 1555 G - Corrosion test Test method for accelerated corrosion under complex environment
Toyota TSH 1539 G § 2.1 - Pencil scratch hardness Test method for hardness of paint film; § 2.1: Pencil scratch hardness
Toyota TSH 1519 G § 3 - Gloss measurement Test method for gloss of paint film; § 3: Specular Gloss (Reflectometer)
Toyota TSH 1504 G § 2.2.1 - Bending test, Manual method Test method for flexibility of paint film; § 2.2.1: Bending test, Manual method
Toyota TSH 1503 G § 2.2 - X-cut test Test method for adhesive property of paint film; § 2.1: X-cut method
Toyota TSH 1503 G § 2.1 - Cross-cut test Test method for adhesive property of paint film; § 2.1: Crosscut method
Toyota TSH 1501 G § 2.1 Method A - Print resistance of paint film (Gauze print method) Test method for print resistance of paint film; § 2.1: Method A (Gauze print method)
Toyota TSF7250G: Test methods regarding material properties for sun visors
Toyota TSF6250G: Test method regarding material properties for head restraints Head restraint (class 1 and class 2)
Toyota TSF0904G: Test method and quality requirements regarding the properties of nonmetallic parts installed around side members
Toyota TSF 0902G: Test methods for the nonmetal material properties of rear-body products and their quality requirements Nonmetalic rear-body interior and exterior products
Toyota PPS 5004 - Rigidity test Textile flex resistance - carpeted floor mats rigidity test
Toyota Engineering Standard TSL 1600 G: Polyester threads for seat sewing
Toyota BSDM 0505 § 9.3 Water extraction - Odor test (water extraction) Smell quality of non-metallic materials § 9.3 smell water extraction test for single parts
Toyota BSDM 0505 § 9.2.2 - Odor test (with water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials § 9.2.2: with water, after ageing 96 h / 80°C
Toyota BSDM 0505 § 9.2.1 - Odor test (with water, initial smell) Smell quality of non-metallic materials, § 9.2.1: with water, initial smell
Toyota BSDM 0505 § 9.1.2 - Odor test (without water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials, § 9.1.2: without water, after ageing 96 h / 80 °C
Toyota BSDM 0505 § 9.1.1 - Odor test (without water, initial smell) Smell quality of non-metallic materials; § 9.1.1: without water, initial smell
Toyota BSDM 0503 - B (reflectrometric) - Fogging test Fogging test method for non-metallic materials - Method B ( reflectrometrical)
Toyota BSDM 0503 - B (gravimetric) - Fogging test Fogging test method for non-metallic materials - Method B (gravimetrical)
Toyota BSDM 0500 - Burning behaviour Flammability test method for interior non-metallic materials
Toyota Boshoku Technical Standard BSDM5514: Polypropylene resin molding materials
Toyota Boshoku Technical Standard BSDA1250: Test method regarding material properties for head restraints
Toyota Boshoku BSDL5100 § 4.19.2 - Color fastness to light (xenon lamp) General test methods for artificial leather - § 4.19.2 Method B: Xenon Lamp
Toyota Boshoku BSDL2106 (Xenon lamp) - Colorfastness to light Standard test methods for seat fabrics with regard to items concerning the natural environment - Xenon Lamp (methods B, E)
Tolerance measurement Tolerance measurement
TM 154100 -Engineering Material Specification Nonwoven for unvisible parts (e.g. Seat)
TL 52443 - PP-Tufting with heavy-duty Backing - Material requirements
TL 52223: Adhesive Tape, Adhesive Bonding on Both Sides or Heat-Activatable for Thermoplastic Elastomers and Elastomer Profile material requirements for adhesive tapes used to mount elastomer profiles, such as EPDM, CR, or TPE, onto painted body surfaces
TJLR.52.161 - Resistance to acid spotting Jaguar cars & Land Rover: Resistance to acid spotting
Tight fit of mounting equipment General method - for determination the strength of mounting equipment (e.g. BMW PR 326.5 § 2.1.4.2)
Thickness measurement Thickness measurement of several matrices with caliper, thickness gauge or outside micrometer
Thermogravimetry (TGA) / DIN EN ISO 11358 - Thermogravimetrical analysis (TGA) Plastics - Thermogravimetry (TGA) of polymers - General principles
Thermography Thermography - e.g. seats with seat heater
Thermal cycle with corrosion test Thermal cycle with corrosion test
Tests for harmful substances Textiles
Tesla TP-0000706 - Module 2 - heat storage Climatic aging of materials, components and assemblies - Module 2
Tesla TP-0000706 - Module 1 - Warm climate cycle test Climatic aging of materials, components and assemblies - Module 1
Tesla TP-0000701: Lightfastness of Materials to Artificial Weathering Determination of the optical and functional deterioration of the materials in the vehicle interior and exterior, by UV radiation.
Tesla TM-5010: Paint, Interior, Polymeric Substrates Paint systems for application to molded parts in teh vehicle interior
Tesla Motors TP-0000703, Method B - Spot Test Chemical Resistance of Surfaces, Method B - Spot Test
Tesla Motors TP-0000703, Method A - Crocking Test Chemical Resistance of Surfaces, Method A - Crocking Test
Tesla Motors TP-0000702 - Scratch test Scratch Behavior of Polymeric Materials
Tesla Motors TM-0032F-P-INT - Interior Paint Performance for both tactilely soft and hard coating systems for interior applications
Tensile Properties General method for tests on the Tensile Properties
Temperature shock resistance Temperature shock resistance
Temperature cycling test Temperature cycling test (e.g. acc. to DBL 9202)
TEGEWA drop test Textile fabrics: Determination of the absorbency
Tearing force/ pulling force of bolts - Tensile test based on DIN EN ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites - Determination of the tearing force and pulling force of bolts
TD_G_SUP_SOP_5.4_145_1_G_0 - Selected UV-stabilisators House method - Determination of stabilisators
TD_G_CB_SOP_5.4_113_G_0 - Determination of amines Amines: Determination of organic substances by HPLC
TD_G_CB_SOP_5.4_111_G_0 (GC-MS) - Determination of phthalates Determination of phthalates in solids with GC-MS
Taiwan VSTD 19-1 (191) - horizontal test - Burning behaviour Vehicle safety tests - flammability of interior materials for motor vehicles
Taber abrasion wheel method - Abrasion resistance Abrasion by Taber abraser
Suzuki SES N 3298: Methods of testing PVC leather for seat skin PVC leather used for the surface portion of interior car seats
Suzuki SES N 3298 § 4.9 - Color fastness to light Methods of testing PVC Leather for seat skin § 4.9 Color fastness to light
Suzuki SES N 3298 § 4.23 - Seam fatigue Methods of testing PVC leather for seat skin; § 4.23 Seam fatigue
Suzuki SES N 3298 § 4.22 - Seam strength Methods of testing PVC leather for seat skin; § 4.22 Seam strength
Suzuki SES N 3298 § 4.16 - Anti-hydrogen-sulfide property Methods of testing PVC leather for seat skin; § 4.16: Hydrogen-sulfide property
Suzuki SES N 3298 § 4.12 - weight loss due to volatilization Methods of testing PVC leather for seat skin § 4.12 Loss by volatilization
Suzuki SES N 3298 § 4.11 - Stickiness Methods of testing PVC leather for seat skin § 4.11 Stickiness
Suzuki SES N 3294 § 5.9 - Crumpling resistance Test method of surface sheet material for automobile seats; § 5.9: Crumpling resistance
Suzuki SES N 3294 § 5.7 - Seam Fatigue Test method of surface sheet material for automobile seats; § 5.7: Seam Fatigue
Suzuki SES N 3294 § 5.6 - Seam strength Test method of surface sheet material for automobile seats; § 5.6: Seam strength
Suzuki SES N 3294 § 5.15 - Mace Snag Test Test method of surface sheet material for automobile seats; § 5.15: Snag (ICI type mace testing method)
Suzuki SES N 3294 § 5.12 (JASO M 346) - Lightfastness Test method of surface sheet material for automobile seats; § 5.12: Color fastness to light
Suzuki SES N 3294 § 5.11 - Pilling resistance (ICI) Test method of surface sheet material for automobile seats; § 5.11: Pilling resistance (ICI type test method)
Suzuki SES N 3294 § 5.10 - Abrasion resistance Test method of surface sheet material for automobile seats; § 5.10: Friction strength (Taber«s abrasion resistance test)
Suzuki SES N 3293/3292 (WAN-2) - Light fastness, exterior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated weatherability test with xenon arc lamp (WAN-2)
Suzuki SES N 3293/3292 (WAN-1) - Light fastness, exterior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated weatherability test with carbon arc lamp (WAN-1)
Suzuki SES N 3293/3292 (WAL-2) - Light fastness, interior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated light resistance test with xenon arc lamp (WAL-2)
Suzuki SES N 3293/3292 (WAL-1) - Light fastness, interior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated light resistance test with carbon arc lamp (WAL-1)
Suzuki SES N 3291a: Testing Method for Plastic Materials
Suzuki SES N 3291: Test Methods for Plastic Material
Suzuki SES N 3253 - Corrosiveness textile materials Test Method of Textile Material Parts Corrosiveness
Suzuki SES N 3247 § 4.6 - Crease-flex resistance Test method and quality criteria of leather for automobile seat; §4.6: Crease-flex resistance
Suzuki SES N 3247 § 4.18 - Seam fatigue Test method and quality criteria of leather for automobile seat; §4.18: Seam fatigue
Suzuki SES N 3247 § 4.17 - Seam strength Test method and quality criteria of leather for automobile seat; §4.17: Seam strength
Suzuki SES N 3246: Evaluation and Quality for Carpet Materials and Mat Materials Carpet and Mat to be used for automobiles
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3243: Painting Quality of Plastic Parts Paint films painted on surfaces of plastic parts
Suzuki SES N 3243: Painting Quality of Plastic Parts Paint films painted on surfaces of plastic parts
Suzuki SES N 2405: Odor Sensory Evaluation / Suzuki SES N 2403: Standard for Control of Volatile Organic Compounds Emission Vehicle interior parts and materials having the surface area of more than 400 cm_
Suzuki SES N 2405 - Odour test Odor Sensory Evaluation
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Surface balancing Surface balancing
Sun simulation (Cycling test) Ageing of automobile components and vehicle in Solar Simulation Units (Cycling test)
Strength test (tensile test on the component) general test method - Strength test (tensile test on components)
Storage in water Storage in water
Storage in test medium Storage in test medium
Storage in sealant remover Storage in sealant remover
Storage in sealant Storage in sealant
Storage in Autoclave Storage in Autoclave
Steam jet test Steam jet test, e.g. for PTL 5524, VW 96172 § 7.6, PTL 5525, VW 96173 § 7.7, PTL 7520, VW 96208 § 5.12 / BMW PR 388 / BMW PR 387.1 / DBL 7381 / GMW 14797 table A1A
Static solidity test (tensile test) general method - Static solidity test (tensile test) - component test
Static load (Shear tensile test) General test method - Static load freely suspended (Shear tensile test), e.g. BMW PR 380.4 issue 2015-09 § 2.2.5.2
St Andrews cross with adhesive tape pull-off St Andrews cross with adhesive tape pull-off
Specimen preparation; machined milling Specimen preparation; machined milling
Soluble contents from a watery extract Soluble contents from a watery extract
Soiling and cleaning behavior (Martindale) Soiling and cleaning behavior (Martindale)
Soiling and cleaning behavior (manually) Soiling and cleaning behavior (manually)
Soiling & cleanability behaviour textiles based on DBL 5399 Soiling & cleanability behaviour of textiles (based on DBL 5399.30)
Soda/Potash pulping Fusion procedure for following determination of anions/cations; soda/potash fusions
SNV 195651 - Odor test Textiles - Determination of odor development of equipment (assessment)
SN 195920 / SN 195921 - Agar diffusion plate test Textile fabrics - Determination of biologically active products (SN 19520), Determination of the antimycotic activity (SN 19521) - Agar diffusion plate test
SMG 7060Z-SMGA-E010-M1 / § 5.9 - Water Spot Resistance Material and product characteristics of the roll-blind-sunshade for automobile; § 5.9: Water spot resistance
SMG 7060Z-SMGA-E010-M1 / § 5.4 - Colour fastness to light (89°C) Material and product characteristics of the roll-blind-sunshade for automobile; § 5.4: Light resistance (89 °C SST)
SMG 7060Z-SMGA-E010-M1 / § 5.16 - Odor Characteristics Material and product characteristics of the roll-blind-sunshade for automobile; § 5.16: Odor characteristics
Shift strength General method for determining the shift strength, e.g. Hyundai/KIA MS 300-32 § 4.10
Separation force (manual) Separation force (manual) - testing with hand load cell
Seam Fatigue Test Seam Fatigue
Sealing / sealant removing Sealing / sealant removing
Scratch test with mar tester according to Oesterle Scratch resistance
Scratch test with Erichsen universal scratch tester - Scratch resistance / lattice cut Scratch test with Erichsen universal scratch tester
Scratch test with Erichsen hardness tester, model 318 - Scratch resistance Scratch resistance
Scratch test Scratch test (e.g. for PTL 5522, § 3.3.3; PTL 5536, § 5.4.1.3; VW TL 52447, § 2.2)
Scratch resistance (with thumbnail or knife blade) General method for determination of the scratch resistance (with thumbnail or knife blade)
Scanning electron microscopy
Scania TB4546 - Odour Smell - phenolic resin bonded material
Scania TB4087: Technical Regulation - Requirements for painted front surfaces in instrument
Scania STD4466: Burning behaviour of materials Materials used in the interior compartments and all insulation materials instaleld int he engine compartment and any separate heating compartment of motor vehicles in classes N3 (trucks) and M3 (buses)
Scania STD 4377en - Scratch resistance Scratch resistance and scratch hardness
Saw cut test Saw cut test, e.g. VW TL 203, ASTM B 571
Sample preparation (splitting, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (sawing, DIN EN ISO 2818) Plastics - Preparation of test specimens by machining
Sample preparation (punching, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (punching) Sample preparation (punching)
Sample preparation (milling, DIN EN ISO 2818) Plastics - Preparation of test specimens by machining
Sample preparation (manual) Sample preparation (manual)
Sample preparation (injection moulding) Sample preparation (injection moulding)
Sample preparation (cutting, E DIN ISO 23529) Rubber - General procedures for preparing and conditioning test pieces for physical test methods
Sample preparation (cutting, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (compression molding) Sample preparation (compression molding)
SAE J948 § 3 - Abrasion resistance by the abrasion wheel method Test method for determining resistance to abrasion of automotive bodycloth, vinyl, and leather, and the snagging of automotive bodycloth; § 3: Taber method
SAE J883 - Dimensional Stability Test method for determining dimensional stability of automotive textile materials
SAE J861 - Resistance to crocking Method of testing resistance to crocking of organic trim materials
SAE J860 - Determination Mass per unit area Surface Vehicle standard - Test Method for Measuring (Weight) of Organic Trim Materials
SAE J855 - Static and permanent elongation Test method of stretch and set of textiles and plastics
SAE J400 - Chip resistance (gravelometer) Test for chip resistance of surface coating
SAE J369 - Flammability Flammability of polymeric interior materials - Horizontal test method
SAE J365 - Resistance to scuffing Method of testing resistance to scuffing of trim materials
SAE J323-A - Cold cracking (Mandrel test) Test method for determining cold cracking of flexible plastic materials; Method A: Mandrel test
SAE J323-A - Cold cracking (Mandrel test) Test method for determining cold cracking of flexible plastic materials
SAE J315: Fiberboard test procedure Determining the critical characteristics of basic or finished fiberboard products.
SAE J2635 - Filiform corrosion test Filiform corrosion test procedure for painted aluminum wheels and painted aluminum wheel trim
SAE J2527 - Light fastness (Exterior) Accelerated exposure of automotive exterior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J2412 - Light fastness (Interior) Accelerated exposure of automotive interior trim components using a controlled irradiance water cooled Xenon-arc apparatus (replacement of SAE J1885)
SAE J2412 - Light fastness (Interior) Accelerated exposure of automotive interior trim components using a controlled irradiance water cooled Xenon-arc apparatus (replacement of SAE J1885)
SAE J1960 - Light fastness (Exterior) Accelerated exposure of automotive exterior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J1885 - Light fastness (Interior) Accelerated exposure of automotive interior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J1847 - Abrasion resistance (Taber abraser) Abrasion resistance testing - Vehicle exterior graphics and pin striping (Taber abraser)
SAE J1767 - Colour difference measurement Instrumental color difference measurements for colorfastness of automotive interior trim materials
SAE J1756 (Fogging G) - Determination of the fogging characteristics (Fogging G) Determination of the fogging characteristics of interior automotive materials, gravimetric procedure (Fogging G)
SAE J1756 (Fogging F) - Determination of the fogging characteristics (Fogging F) Determination of the fogging characteristics of interior automotive materials, photometric procedure (Fogging F)
SAE J1545 - Color difference measurement Instrumental color difference measurement for exterior finishes, textiles and colored trim
SAE J1530 § 4 - Abrasion resistance Test method for determining resistance to fiber loss, resistance to abrasion and bearding of automotive carpet materials; § 4: Abrasion resistance
SAE J1530 § 3 - Abrasion with the Taber abraser method Test method for determining resistance to fiber loss, resistance to abrasion and bearding of automotive carpet materials; § 3: Taber abraser method
SAE J1389 - Corrosion test Corrosion test for insulation materials
SAE J1352-A - Compression and Recovery Compression and Recovery of insulation paddings - Method A
SAE J1351 - Odor test Hot odor test for insulation materials
SAE J1351 - Odor Test Hot Odor Test for Insulation Materials
SAE J 913 - Resistance against fluorescein Test method for wicking of automotive fabrics and fibrous materials
Rust on the edges (based on DIN EN ISO 4628-1) - Evaluation degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (Edge rust)
Rotting resistance Rotting resistance
Rotary abrasion test (Schopper) Schopper Abrasion; Resistance to wear (Schopper)
Retainer tensile test Retainer tensile test
Resistance under influence of temperature Resistance under influence of temperature
Resistance to test medium Resistance to test medium
Resistance to ozone Resistance to ozone
Resistance to care agents Resistance to care agents
Resistance of PVC film to amines Resistance of PVC film to amines
Resistance of paint films to various fluids
Renault Trucks RT D27 1911 / A - Artificial ageing using weather-ometer Paint, rubber and plastic coatings - Artificial ageing using weather-ometer
Renault RT D45 1046 - Determination of compression set Flexible cellular trim materials - Residual set after compression at a constant deformation thickness
Renault RT D42 1047 - Dynamic fatique by compression at fixed deformation Flexible cellular materials - Dynamic fatique by compression at fixed deformation
Renault RT D42 1007 - Resistance to wrinkling Plastic coated textiles and lining material - Resistance to wrinkling
Renault RT D41 1142 - Tensile properties (threads) Measurement of strength and elongation to rupture - Threads, strings
Renault RT D41 1127 - Resistance against the fraying at the seams Textiles - Resistance against the fraying at the seams
Renault RT D41 1126 - Tearing strength Fabrics, plastified fabrics, plastic strips, carpets - Tearing
Renault RT D41 1065 - Tensile strength after stitching without thread Textiles - Plastic coated textiles - Tensile strength after stitching without thread
Renault RT 1309 - Ageing by a given climatic cycle Trim materials and parts - Ageing by a given climatic cycle
Renault RT 1259 - Pulling of the loops Pulling of the loops - Textile carpets
Renault RT 1045 - Determination of apparent density Cellular materials - Apparent density
Renault RT 1013 - Determination of thickness Thickness measurement - Materials in non-compressible sheets (e.g. plastic sheets, paper)
Renault D51 3022 - Peeling (90 °) Interior Trim Materials - Right-Angle Peeling
Renault D49 3046 - Odour test Odour Emissions - Interior equipment parts - Measurement of the intensity and characterization of odour from parts in passenger compartment in climate chamber
Renault D49 3027 - Determination of volatile organic emissions - chamber test Volatile organic components analysis produced by cabin parts (VOC)
Renault D49 3001 - Odour test Given off odours - Internal equipment parts - Intensity evaluation and global odour characterisation
Renault D49 1653, in accordance - Soiling and cleaning ability Trim Materials - Tendency to soiling and cleaning capacity
Renault D47 5530/ B - Abrasion of leather by rubbing of seams Renault: Leathers - Abrasion of leather by rubbing the seams
Renault D47 1915 - Colour fastness Plastics - Colour fastness to fluids due to the effect of light
Renault D47 1431 - Colour fastness to artificial light Materials and passenger compartment parts - Behaviour of the appearance to artificial light at high and medium temperatures
Renault D47 1309 - Climatic Cycle Test Automobile equipment trimming materials and parts - Ageing according to given climatic cycle
Renault D47 1234 - Heat resistance Renault: Parts containing plastic elements - Reaction to heat in a non-radiant dry oven
Renault D47 1165 (heat storage) - Accelerated ageing Plastics and products applied to the body in white or coated in paint - Accelerated ageing - heat storage (constant temperature)
Renault D47 1165 (climate storage) - Accelerated ageing Plastics and products applied to the body in white or coated in paint - Accelerated ageing - climate storge (constant climate)
Renault D47 1122 - Colour fastness to artificial light Trim Materials - Colour fastness to artificial light at low temperature
Renault D47 1022 - alkaline - Colourfastness to Perspiration Textiles - Colourfastness to perspiration (alkaline)
Renault D47 1022 - acid - Colourfastness to Perspiration Textiles - Colourfastness to perspiration (acid)
Renault D47 1020 (3.8.4 acid perspiration) - Resistance to acid perspiration Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.4: Acid perspiration
Renault D47 1020 (3.8.3 alkaline perspiration) - Resistance to alkaline perspiration Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.3: Basic perspiration
Renault D47 1020 (3.8.2 sea water) - Resistance to sea water Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.2: Sea water
Renault D47 1020 (3.8.1 Water) - Resistance to water Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.1: Distilled water
Renault D47 1005 - Staining by water Lining materials - Staining by water
Renault D45 5331/ B - Breaking angle at folding Renault: Trim composite materials - Tendency to form folds
Renault D45 2024 - Fatigue of stitching Textiles - Fatigue of stitching
Renault D45 1837 - Staining by test media Paint coatings on plastic parts and mass staining of colored materials by automotive fluids
Renault D45 1817 - Soiling resistance Organic materials and coatings - Soiling resistance
Renault D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) Renault: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging G)
Renault D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) Renault: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging G)
Renault D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) Interior trim materials and passenger compartment parts - Fogging F (reflectometric)
Renault D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) Interior trim materials and passenger compartment parts - Fogging F (reflectometric)
Renault D45 1601 - Volatility of additives Passenger compartment materials - Volatility of additives on surfaces
Renault D45 1564 - Determination of dimension change Textiles - Dimensional variations in humidity
Renault D45 1333 - Burning behaviour Materials inside passenger compartment - Horizontal flammability
Renault D45 1291 (Shore D) - Evaluation of Shore D Hardness Rubbers and Plastics Shore Hardness A or D
Renault D45 1225 - Volatility of Additives Steering Wheels and Gear Knobs - Volatility of Additives
Renault D45 1197 - B - Separation Felts and paddings - Separation
Renault D45 1195 - Determination of thickness and compressibility Renault: Felts and waddings - Thickness and compressibility
Renault D45 1014 - Number of threads or stitches Fabrics - Count Measurement
Renault D45 1012 - Determination of mass per unit Renault: Sheet materials - Surface mass
Renault D45 1010 - Colour fastness to rubbing Polymer materials and parts - Inside and outside passenger compartment - Colour fastness to rubbing
Renault D44 1900 - Resistance to marking Plastics - Resistance to marking (Resistance to scoring through polishing)
Renault D44 1694 - Claw test Woven and knitted fabrics - Claw test
Renault D44 1221 - Resistance to scuffing Materials with brushed velour surface - Resistance to scuffing
Renault D42 3109 / --- - Determination of volatile organic compounds (VOC) Renault, Vehicle passenger compartment materials, Evaluationof the quantity of volatile organic compounds (VOC) by thermodesorption/GC/MS
Renault D42 1775/ B - Resistance to scoring by abrasion Renault: Interior and exterior plastic parts - Resistance to scoring by abrasion
Renault D42 1235/ D - Impact strength (falling-weight method) Renault: Rubber and plastic parts - Impact strength (Falling weight method)
Renault D42 1008/ D - Cold Brittleness Renault: Leather, Plastic or Rubber coated Textiles, Plastic sheets - Cold Brittleness
Renault D41 1029 - Tensile strength Renault: Textiles, coated textiles and leathers - Tensile strength
Renault D41 1003 - Compressive strength Flexible alveolate materials for trimming - Compressive strength
Renault D40 3004 / -- A - Analysis of formaldehyde and other carbonyl compounds Renault, Analysis of formaldehyde and other carbonyl compounds
Renault D25 1413 - Gloss measurement (20°, 60°, 85°) Paint coatings, plastics and rubbers - Gloss measurement
Renault D21 3092 - Scratch resistance with Erichsen hardness tester, model 318 Paints and related products applied onto plastic material - Tearing resistance measured with sclerometer / scratch resistance
Renault D17 2028-C - Corrosion Test Corrosion test by automatic change of phases of salt spray, drying and humidity (ECC1)
Renault D15 5084 - Colour measurement (CIELAB) Renault: Opaque or transparent coloured products - Calculations of colourimetric variations (CIE LAB 1976 System)
Renault D15 1343 - Visual comparison of colours Coloured materials - Visual comparison of colours in light chamber
Renault D14 1055 - Mechanical wear through abrasion Organic materials and coatings - Rubbing wear
Renault D11 1157 - Peeling at a low angle Adhesives and covering materials - Peeling at a low angle
Renault 1634 - Adhesion Adhesion of the coating - various materials, for eg textiles, carpet
Renault 1474 - Heat-light aging Heat light aging in Xenotest 150 A 90°C - Textiles, T.E.P., threads, trim leathers
Reduction of grit size, sample preparation Sample preparation; reduction of grit size
Reanult D45 1291 (Shore A) - Evaluation of shore A Hardness Rubbers and Plastics Shore Hardness A or D
Raman-Spectroscopy Raman-Spektroskopie
RAL-GZ 716: Quality and test specifications for components and processes / Section II-a-1: Seals for plastic windows and doors for materials (also referred to as recipes / compounds) and seals made therefrom for use in plastic window and door systems
QV 51154 - QS Floor mats Floor mats
Qoros QOSTA-PNT000006 - Chemical resistance Chemical resistance of paint coatings
Qoros Qosta-EVR300000.02 - Determination of volatile organic compounds Determination of the emission of volatile organic compounds from vehicle interior parts
Pyrolysis-IR
Pyrolyse-GC-MS Pyrolysis-GC-MS, Pyrolysis - gas chromatography with mass spectrometry
PVC-proof according to Beilstein method PVC-proof according to Beilstein method
PV 3410: PUR-Flexible Foam - Tests Methods Flexible Foam
PV 3410: PUR Flexible Foam - Test Methods PUR flexible foams
PV 3410 § 4.4.1 - climate storage Testing of soft PUR foams in seat cushions
Pull-off force Pull-off force general
PTL 4061: Delivery Instructions - lubricating varnish coated body seals lubricating varnish coated elastomer parts
PTL 4026, VW 96136: Exterior - decorative film / Protector - Requirements and test methods For decorative film and protective films for exterior, not for transport protector film.
PSA DPCA D10-0003 - Determination of volatiles Determination of Volatile Organic Compounds and Carbonyl Substances in Automobile Non-metal Materials and Parts ----Tedlar Bag Method
PSA D51 1485 - A - Peeling at right angles (Process A) PSA Peugeot - Citroen: Glues and adhesives - Peeling at right angle (Process A)
PSA D49 1653, in accordance - Soiling and cleaning ability Trim Materials - Tendency to soiling and cleaning capacity
PSA D47 5530/ D - Abrasion of leather by rubbing of seams PSA Peugeot - Citroen: Leathers - Abrasion of leather by rubbing the seams
PSA D47 5252 - Light fastness PSA Peugeot - Citroen: Materials and parts in the passenger compartment - Appearance behaviour to artificial light at a low temperature
PSA D47 1431 - Colour fastness to artificial light PSA Peugeot - Citroen: Materials and parts for passenger compartment - Appearance and behaviour to artificial light at high and mean temperatures (Colour fastness)
PSA D47 1309 - Climate cycle test PSA Peugeot - Citroen: Materials and parts for automotive equipment - Ageing according to a given climatic cycle
PSA D47 1309 - Climate cycle test PSA Peugeot - Citroen: Materials and parts for automotive equipment - Ageing according to a given climatic cycle
PSA D47 1279 - Behaviour when in contact with protection and protection removal products PSA Peugeot - Citroen: Plastic components - Behaviour when in contact with protection and protection removal products
PSA D47 1217 - Behaviour in humid atmosphere - Resistance to micro-organisms PSA Peugeot - Citroen: Felts, padding, wood fibre - Behaviour in humid atmosphere - Resistance to micro-organisms
PSA D47 1165 - Climate storage PSA Peugeot - Citroen: Products applied to body-in-white or paint coated body, plastics - Accelerated ageing; only methods N / R / W / X (climate storages)
PSA D47 1020 (3.8.4 acid perspiration) - Resistance to acid perspiration PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.4: Acid perspiration
PSA D47 1020 (3.8.3 alkaline perspiration) - Resistance to alkaline perspiration PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.3: Basic perspiration
PSA D47 1020 (3.8.2 sea water) - Resistance to sea water PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.2: Sea water
PSA D47 1020 (3.8.1 Water) - Resistance to water PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.1: Distilled water
PSA D47 1005 (Textiles) - Water staining PSA Peugeot - Citroen: Textiles - Water and other staining; § 7.1: Textiles
PSA D47 1005 (Leather) - Water staining PSA Peugeot - Citroen: Textiles - Water and other staining; § 7.2: Leather
PSA D45 5650 - Air permeability of textile fabrics Flexible Materials - air permeability test
PSA D45 5601 - Formation of folds on convex half spheres Aptitude of a flexible material to mating with a convex shape, trim tester method
PSA D45 5523 - Resistance to scratching PSA Peugeot - Citroen: Resistance to scratching (sclerometer test)
PSA D45 5331/ C - Breaking angle at folding PSA Peugeot Citroen: Trim composite materials - Tendency to form folds
PSA D45 1730 - Burning behavior (Test with incandescent wire) Plastics burning behavior (Test with indandescent wire)
PSA D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) PSA Peugeot - Citroen: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging G)
PSA D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) Interior trim materials and passenger compartment parts - Fogging G (gravimetric)
PSA D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) PSA Peugeot - Citroen: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging F)
PSA D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) Interior trim materials and passenger compartment parts - Fogging F (reflectometric)
PSA D45 1601 / Renault D45 1601 - Volatility of additives PSA Peugeot - Citroen: Materials in passenger compartment - Volatility of additives on surfaces
PSA D45 1333 - Burning behaviour PSA Peugeot - Citroen: Materials interior to passenger compartment - Horizontal combustibility
PSA D45 1333 - Burning behaviour Interior materials from the cabin horizontal flammability
PSA D45 1234 - Heat resistance PSA Peugeot - Citroen: Parts containing plastic elements - Reaction to heat in a non-radiant dry oven
PSA D45 1195 - Determination of thickness and compressibility PSA Peugeot - Citroen: Felts and waddings - Thickness and compressibility
PSA D45 1195 - Determination of thickness and compressibility PSA Peugeot - Citroen: Felts and waddings - Thickness and compressibility
PSA D45 1139 - Dimensional variations and changes in appearance under heat PSA Peugeot - Citroen: Covering materials - Dimensional variations and changes in appearance under heat
PSA D45 1124 - Static and permanent elongation PSA Peugeot - Citroen: Textiles and coated textiles - static elongtion under low load and residual elongation
PSA D45 1046 - Determination of compression set Flexible cellular trim materials - Residual set after compression at a constant deformation thickness
PSA D45 1045 - Determination of apparent density Cellular materials - Apparent density
PSA D45 1030 - Flexibilität PSA Peugeot - Citroen: Plastic or rubber coated textiles - Flexibility of a loop
PSA D45 1014 - Number of threads or stitches Textiles - Thread count
PSA D45 1012 - Determination of mass per unit PSA Peugeot - Citroen: Sheet materials - Surface mass
PSA D45 1010 - Colour fastness to rubbing PSA Peugeot - Citroen: Polymer materials and parts - Inside and outside passenger compartment - Colourfastness to rubbing
PSA D44 5600 (woven fabric) - Mace Snag Test PSA Peugeot - Citroen: Resistance to yarn pulling - Mace snag method
PSA D44 5600 (knitted fabric) - Mace Snag Test PSA Peugeot - Citroen: Resistance to yarn pulling - Mace snag method
PSA D44 1846 - Pilling (Martindale-method) PSA Peugeot - Citroen: Textiles - Tendency to bobbling & Fluffing by rubbing (Pilling / Martindale-method)
PSA D44 1221 - Resistance to scuffing PSA Peugeot - Citroen: Materials with brushed velour surface - Resistance to scuffing
PSA D44 1221 - Resistance to scrapping PSA Peugeot - Citroen: Materials with velveted surface - resistance to scraping
PSA D44 1073 - Wear by rubbing PSA Peugeot - Citroen: Covering materials - Wear by rubbing
PSA D42 1775/ C - Resistance to scoring by abrasion PSA Peugeot - Citroen: Interior and exterior plastic parts - Resistance to scoring by abrasion
PSA D42 1235/ D - Impact strength (falling-weight method) PSA Peugeot - Citroen: Rubber and plastic parts - Impact strength (Falling weight method)
PSA D42 1008/ F - Cold brittleness PSA Peugeot Citroen: Leather, Plastic or Rubber coated Textiles, Plastic sheets - Cold Brittleness
PSA D42 1007 - Permanent folding PSA Peugeot - Citroen: see Renault RT D42 1007: Plastic coated textiles and lining - Wrinkling
PSA D41 1588 - Resistance of seams to traction PSA Peugeot - Citroen: Covering materials - Resistance of seams to traction
PSA D41 1126 - Tear strength PSA Peugeot - Citroen: Textiles - Plastic coated textile (PCT) - Plastic sheets - Carpet - Leathers: Tearing
PSA D41 1097 - Puncture resistance Floor coverings and trims - Puncture resistance
PSA D41 1029 - Tensile strength PSA Peugeot - Citroen: Textiles, coated textiles and leathers - Tensile strength
PSA D41 1015 - Peeling test PSA Peugeot - Citroen: Trim material - Peeling at 180°
PSA D40 5535 - Analysis of formaldehyde and other carbonyl compounds PSA Peugeot - Citroen: Analysis of formaldehyde and other carbonyl compounds of materials in the vehicle passenger compartment by liquid chromatography
PSA D27 5437 - Solvent resistance PSA Peugeot - Citroen: Paint coatings - Solvent resistance
PSA D27 5377 - Staining by chemical products PSA Peugeot - Citroen: Paint coatings - Staining by chemical products
PSA D27 5144 - Staining PSA Peugeot - Citroen: Paint coatings and similar products - Staining
PSA D27 1433 - Resistance to sulphuric acid (30 %) PSA Peugeot - Citroen: Paint coatings and similar products - Resistance to diluted sulphuric acid
PSA D27 1389 - Artificial ageing by weather-ometer PSA Peugeot - Citroen: Paint coatings - Rubbers and plastics - Artificial ageing by weather-ometer
PSA D27 1327 - Resistance to immersion in water PSA Peugeot - Citroen: Paint coatings - Resistance to immersion in water (Ford tank)
PSA D25 5001 - Adhesion after cross-cut (St. Andrews cross) PSA Peugeot - Citroen: Paint coating - Adhesion evaluation by means of counter brace (St. Andrews cross)
PSA D25 1413 - Gloss measurement (20°, 60°, 85°) PSA Peugeot - Citroen: Paint coatings - Rubber and plastics - measurement of gloss
PSA D25 1075 - Cross hatch test PSA Peugeot - Citroen: Paint coatings - Cross hatch test
PSA D24 5021 - Hydrolysis resistance with scratch test Coatings for painted plastic parts for interior, hydrolysis resistance
PSA D24 5020 - Abrasion resistance (Abrex) PSA Peugeot - Citroen: Coatings for decorative interior plastic components - Abrasion resistance - Abrex Test Method
PSA D23 5201 - Behaviour against hand and sun creme PSA Peugeot - Citroen: Coatings for decorative interior plastic parts - Behaviour with creams and lotions
PSA D23 1001 - Copper Accelerated Acetic Salt Spray Test (CASS-Test) PSA Peugeot - Citroen: Metal Coating - Copper Accelerated Acetic Salt Spray Test (CASS-Test)
PSA D17 1058 - Salt spray fog test PSA Peugeot - Citroen: Materials and coatings - Salt spray test of 5% NaCl and methods of grading
PSA D15 5084 - Colour measurement (CIELAB) PSA Peugeot - Citroen: Opaque or transparent coloured products - Calculations of colourimetric variations (CIE LAB 1976 System)
PSA D15 1343 - Visual color assessment PSA Peugeot - Citroen: Coloured materials - Visual comparison of colours in a light chamber
PSA D14 3108 - Colour fastness (Veslic abrasion) Leather - Tests for colour fastness - (Veslic abrasion)
PSA D14 1055 - Rubbing wear PSA Peugeot - Citroen: Organic materials and coatings - Rubbing wear
PSA D12 4410 - Resistance to pullout side protections glued on the exterior of the body - Resistance to pullout on the edge
PSA D12 4400 - Capacity of absorbing the curve unevenness Side protections glued on the exterior of the body - Capacity of absorbing the curve unevenness sheet/ side protection
PSA D11 1157 - Peeling test PSA Peugeot - Citroen: Adhesives and covering materials; Peeling at a low angle
PSA D11 1157 - Peeling at a low angle PSA Peugeot - Citroen: Adhesives and covering materials; Peeling at a low angle
PSA D10 5517 - Odour test PSA Peugeot - Citroen: Parts in passenger compartment and boot - Assessment of odour strength - Assessment against damning descriptive terms
PSA D10 5517 - Odour test PSA Peugeot - Citroen: Parts in passenger compartment and boot - Assessment of odour strength - Assessment against damning descriptive terms
PSA D10 5496 - Amine emission PSA Peugeot - Citroen: Search for basic amine type volatiles in polyurethane materials from the vehicle passenger compartment
PSA D10 5495 - Determination of volatile organic compounds (VOC) PSA Peugeot - Citroen: Materials in vehicle passenger compartment - Assessment of the quantity of volatile organic compounds (VOC) by thermodesorption / GC / MS (FID)
PSA B62 0300: Thermoplastic, Thermosetting, Thermoplastic Elastomer and Rubber Materials - Classification and Specification
PSA B62 0300: Thermoplastic, Thermosetting, Thermoplastic Elastomer and Rubber Materials - Classification and Specification
PSA B20 0250: Material subject to regulations use restrictions within the Peugeot citrön graoup
PSA B15 5050: Paint coatings, Finished vehicles Paint color panels as it relates to painted body representing (mono or multi-layer lacquer coatings)
PSA B15 5050: Paint coatings, finished vehicles For painted car-body (mono or multi-layer coatings), exterior and internal parts of the bodywork, substrates made of metal or plastic
PSA B15 4140 § 4.1.1 - crack density Coatings - Electrolytic Chromium Plating on Plastic Parts - Crack on the Chromium Plating
PSA B15 4140 § 3.2.1 - Layer thickness measurement Coating - electrolytic chromium plating on plastic parts - § 3.2.1 Layer thickness measurement
PSA 01378_13_01039: Technical specification Project P8 for plastic coated fabrics for vehicle interior parts Plastic coated fabrics for vehicle interior parts
Protective film compatibility General method for coatings and paints
Proof of silicone presence, qualitative Proof of silicone presence, qualitative
Preformed volatile N-Nitrosamines (based on BGI 505.23) Method for determination of N-nitrosamines
PPV 5242, VW 96446 (VDA 675-242-A) - Paint indifference, method A: contact discoloration and environment discoloration due to migration Elastomers - Lacquer indifference - Discolouration of organic materials by means of elastomers - Test methods for determination of characteristics, method A: contact discolouration and discolouration due to migration
PPV 4017/ VW 96380 variant 1A - Corrosion test Surface protection - Corrosion test - modified alternating climate test
Potential difference (step test) Potential difference (step test)
Porsche VA.PK.033 § 5.3 - Colour comparison in the colour matching cabinet Colour shade examination; § 5.3: Colour comparison in a colour viewing booth
Porsche VA.PK.033 Control of color - § 5.3 - Color comparison in Color Viewing Booth painted bodies and attachments "body color" (exterior paints)
Porsche Test specification Body equipment - 01.02.18 Paneling entry strips Entry strips (interior)
Porsche resistance to media (crockmeter) - Surface resistance to media Surface resistance to media (e.g. for PTL 4025, PTL 5536, PTL 5538 or VW 96135, VW 96183, VW 96184)
Porsche PTL 8501 / VW 96243 - Burning behaviour Interior - Burning behaviour - requirements and testing
Porsche PTL 8172, VW 96242: Flocked Plastic Parts - Interior Parts - Requirements and tests Flocked Plastic Parts - Interior Parts
Porsche PTL 8140, VW 96238: Interior - General requirements for components and semi-finished product materials, Requirements and tests General requirements, temperature ranges and tests on all interior components: component deformation / alteration of the surface / changes in the material properties
Porsche PTL 8140, VW 96238: Interior - General requirements for components and semi-finished product materials, Requirements and tests General requirements, temperature ranges and tests on all interior components: component deformation / alteration of the surface / changes in the material properties
Porsche PTL 8140, VW 96238: Interior - General requirements for components and semi-finished product materials, Requirements and tests General requirements, temperature ranges and tests on all interior components: component deformation / alteration of the surface / changes in the material properties
Porsche PTL 8140, VW 96238: Interior - General requirements for components and semi-finished materials General requirements, temperature ranges and tests on all interior components: component deformation / alteration of the surface / changes in the material properties Definition semi-finished materials: leather / laminate films / technical textiles (eg he
Porsche PTL 8140 / VW 96238 § 6.7 - Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12) Interior parts - Tests and requirements; § 6.7: Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12)
Porsche PTL 8140 / VW 96238 § 6.7 - Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12) Interior - General requirements of components and semi-finished materials - Requirements and tests; § 6.7: Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12)
Porsche PTL 8127 / VW 96453: Textiles - Absorbent material made of fiber fleece for the interior - Requirements and tests Absorbent material made of fiber fleece
Porsche PTL 8110 / VW 96228: Bodywork - Insulation material - Material requirements and tests Insulation material for interior and exterior
Porsche PTL 7531, VW 96217: Electrolytic zinc and zinc alloys coatings - Requirements and test methods
Porsche PTL 7524, VW 96210: Surface protection - Anodic oxidation - Anodic coatings (w625, w630, w640), Requirements and tests Anodic coatings on components made of aluminum, e.g. trims, roof rack, sunroof water drain
Porsche PTL 7524 § 4.5.5 - Corrosion test with brake dust
Porsche PTL 7520, VW 96208: Exterior / surface protection - Powder Coating - Surface X652 - Requirements and tests powder-coated metal parts in the exterior area
Porsche PTL 7515, VW 96206: Surface Protection - surface coating of metallic exterior components
Porsche PTL 5580, VW 96457: Paintwork on Plastic Exterior Parts and Fiber-Reinforced Plastics - Requirements and Plastics Painting of plastic exterior parts, including fiber-reinforced plastic parts in the body color, and clear-coated fiber-reinforced plastic parts (visible carbon fiber structure)
Porsche PTL 5538, VW 96184: Interior - Surface Patterns - wood / carbon / piano paint / metals visible parts of the vehicle interior for decoration and / or protection purposes
Porsche PTL 5538 / VW 96184 § 5.4.8.2 - Soiling and cleanability Interior - Decorative surface (wood, carbon, piano lacker, metall) - Tests and requirements; § 5.4.8.2: Soiling and cleaning behavior of unprotected 'open' decorative surfaces
Porsche PTL 5536, VW 96183: Technical Terms of Delivery - Surface Decors of the Vehicle Interior - Paints / Printing / Films / Thin Film Systems - Requirements and Tests Paint finishes, pad printing and heat seal embossing of visible components of vehicle interior trim
Porsche PTL 5536, VW 96183: Interior - Surface Patterns - Paint / pad printing / hot stamping - Requirements and tests Paints, pad print and heat seal imprints of visible components of the vehicle interior
Porsche PTL 5525, VW 93173: Painting of body outer skin parts from hard plastics (thermoplastics and thermosets) - Requirements and tests Requirements and test the coating of skin parts in body color hard plastics firm, for example: reinforced thermosets, such as glass-fiber reinforced polyester (GRP, SMC) / hard thermoplastics, such as PA, ABS, PC, PC / ABS, ASA / other hard plastics, the
Porsche PTL 5525 / VW 96173 § 7.5 - Adhesion: Scratch test Paintwork of body outer panels made of hard plastics (thermoplastics and duroplasts) - Requirements and tests; § 7.5: Adhesion: Scratch test
Porsche PTL 5524, VW 96172: Painting of body outer skin parts made of flexible plastics - Requirements and tests Requirements and test the coating of series outer panels of flexible plastics, such as: PUR integral foam / polyurethane integral foam, glass fiber reinforced / thermoplastic polyurethane, glass fiber reinforced / flexible thermoplastics, such as PP-T20-
Porsche PTL 5522: Painting of Non-Metallic Materials for interiors Painting of visible components of vehicle interiors
Porsche PTL 5522 § 3.7 - Elasticity Paintwork - Non-metallic materials for interior; § 3.7: Elasticity
Porsche PTL 5522 § 3.6 - Scratch resistance Paintwork - Non-metallic materials for interior; § 3.6: Scratch resistance (finger nail test)
Porsche PTL 5522 § 3.3.2 - Peel test Paintwork - Non-metallic materials for interior; § 3.3.2: Peel test (for soft basic materials)
Porsche PTL 5522 § 3.11 (based on DIN EN ISO 105-X12) - Resistance to cleaning agents Paintwork - Non-metallic materials for interior; § 3.11: Resistance to cleaning agents (crockmeter test)
Porsche PTL 5202, VW 96162: Interior Leather - Requirements and Tests For all lamination leather and upholstery leather in the vehicle interior
Porsche PTL 5202, VW 96162 - Interior Leather - Requirements and Tests For all lamination leather and upholstery leather in the vehicle interior
Porsche PTL 5025 - Textile roof lining: Requirements and tests
Porsche PTL 5020 - Top material: Requirements and test methods top material
Porsche PTL 4401, VW 96150: Plastics and adhesives - Specific volume resistivity - Requirements and test methods Protection against corrosion of light metals (aluminum, magnesium) in contact with electron-conducting solids (elastomer and plastic parts, bodyshell adhesives) in the vehicle
Porsche PTL 4084, VW 96149 - Decorative steering wheel casings - Material requirements and component testing Decorative steering wheel casings
Porsche PTL 4083, VW 96148 - Leather Wrapped Steering Wheel - Material requirements and component testing leather wrapped steering wheels
Porsche PTL 4054, VW 96146: Fibre reinforced plastics - continuous fiber reinforced composites with thermosetting or thermoplastic matrix For structure, exterior, interior and mechanical parts.
Porsche PTL 4039 - Technical delivery conditions - injection molded parts made of PC / ABS e.g. Heating parts, side jets, covers
Porsche PTL 4025, VW 96135: Interieur / Exterieur - Surface decorations - Plastic components with electrodeposited metal surface - Requirements and test methods Electrodeposited surface layers on metallizable polymer materials of the interior (passenger compartment) and exterior of vehicles
Porsche PTL 4025, VW 96135: Interieur / Exterieur - Surface decorations - Plastic components with electrodeposited metal surface - Requirements and test methods Electrodeposited surface layers on metallizable polymer materials of the interior (passenger compartment) and exterior of vehicles
Porsche PPV 8042 / VW 96424 - Emission test with thermodesorption analysis (based on VDA 278) Interior - Emission behavior by thermodesorption analysis (based on VDA 278)
Porsche PPV 8041 / VW 96423 - Emission measuring in a test cabinet Interior - Emission behaviour - Emission measuring in a test cabinet (following VDA 276-1)
Porsche PPV 8040 / VW 96422 - Determination of organic emissions Measurement of organic emission of the vehicle interior
Porsche PPV 8040 - Messung von organischen Emissionen des Fahrzeuginnenraumes
Porsche PPV 7750 / VW 96417 - Resistance to stress cracking Automobile - Chemical resistance of plastics and thermoplastic elastomers in combination with mechanical stresses
Porsche PPV 5002 / VW 96395 - shrinkage behavior Leather - Determination of shrinkage behavior
Porsche PPV 5002 - A / VW 96395 - shrinkage behavior Leather - Determination of area-shrinkage and shrinkage-force - A - area shrinkage
Porsche PPV 4050 / VW 96390 (as received condition) - Determination of volatile organic emissions in SHED chambers Determination of Volatile Organic Emissions from non-fuel impinging components - Measuring emissions in SHED chambers (as received condition)
Porsche PPV 4050 / VW 96390 (aged) incl. ageing - Determination of volatile organic emissions in SHED chambers Determination of Volatile Organic Emissions from non-fuel impinging components - Measuring emissions in SHED chambers (aged, incl. ageing)
Porsche PPV 4025 - Color comparison in the color matching cabinet hue control - Color comparison in the color matching cabinet
Porsche PPV 4015 / VW 96379 - Climate cycle test Exterior - Test of add-on parts - Climate cycle test
Porsche PPV 4014-B / VW 96378 (SST 65 °C) - Weathering in warm and humid climate Exterior - Weathering of non-metallic materials - Testing in warm and humid climate (SST: 65 °C)
Porsche PPV 4014-A / VW 96378 (SST 90 °C) - Weathering in dry hot climate Exterior - Weathering of non-metallic materials - Testing in dry-hot climate (SST: 90 °C)
Porsche PN 790, VW 96044: Total vehicle - evaporative emission - SHED For components / assemblies of the entire vehicle.
Porsche PN 780: Interieur - Emission behavior Assessment criteria for the use of low-emission materials and components of the vehicle interior and luggage compartment as well as for parts that come with the vehicle interior air flowing in touch.
Porsche PN 705, VW 96037: Elastomers - Requirements and tests Elastomeric components with limited quality requirements, for which a clear material allocation suffices, e.g. plugs, spouts
Porsche creme resistance Creme resistance (e.g. for PTL 4025, PTL 5536, PTL 5538 or VW 96135, VW 96183, VW 96184)
Porsche / VW TL 161: Painting on plastic exterieur parts - Requirements and tests of Porsche AG Requirements for the painting of plastic exterieur parts in the colour of the car.
Photometrische Bestimmung analog DIN EN 717-3 - Determination of formaldehyde by the acetylacetone method Photometric determination of formaldehyde by the acetylacetone method
Photogrammetry Photogrammetry
Photogrammetric measurement Photogrammetric measurement, three dimensional
Phenolic yellowing Phenolic yellowing (eg "Courtaulds method" Triumph Suppliers Policy)
Phase 4 - model and prototype Design - Phase 4: model and prototype, preparation for presentations - acceptance by customers and transfer of results
Performance of seat heating - Function after cold storage Climate test / climate storage (cold storage)
PATAC TS-BD-003 - Bag Emission Test
Paint structure - Waviness, measurement with wave-scan systems General method on paint structure measurement
Paccar CS 0021 - Resistance to automotive fluids Resistance to automotive fluids
Paccar CMT0021 - Resistance to automotive fluids Resistance to automotive fluids
Oxidative aging of the heavy layer Test of oxidative aging of the heavy layer
Oven drying (105°C) - Determination of dry matter and water content Dry matter and water content at 105°C
Oven drying (100°C) Dry matter and water content at 100°C
Oven drying Oven drying
Outdoor weathering Outdoor weathering
Out door weathering
Out door weathering Out door weathering
Optical sample measurement Optical sample measurement
Opel/GM GMW 15468:Hydrolytic Resistance of Polyamide to Coolants glass fiber reinforced polyamide 66
Opel/GM GMW 14333, Method B (Continous immersion) - Resistance to Fuels Resistance to Fuels of Exteriors Automotive Materials and Components
Opel/GM GMW 14333, Method A (Dip) - Resistance to Fuels Resistance to Fuels of Exteriors Automotive Materials and Components
Opel TM 346000 - Material Spezification - Body Equipment PVC Foam artificial leather
Opel QK 00400 - Blends of PP und EPDM resp. EPM with fillers for interior and exterior components of the automotive body
Opel QK 002400; Material specification plastics - ABS-,ASA-resp.SAN-Blends
Opel QK 002000 - Techn. Delivery of Materials ABS
Opel QK 000 500 -. Technical delivery conditions for materials
Opel GMW 14145 - Seam strength Seam strength
Odour profile (qualitative) Odour profile (qualitative), examination of the qualitative odour without pretreatment
Odor - Odor test
Number of filaments Textiles: Determination of number of filaments
Nissan NES M7100: Fabrics for Automobiles For automotive seats and interior trim
Nissan NES M7081 § 9 - Tensile properties PVC-Coated Fabric for Automobiles; § 9: Tensile Strength and Elongation Rate Testing Procedure
Nissan NES M7081 § 21 - Heat shrinkage PVC-Coated Fabric for Automobiles; § 21: Heat shrinkage testing procedure
Nissan NES M7081 § 15 - Crumpling resistance NES - PVC-Coated Fabric for Automobiles; Crumpling Resistance Testing Procedure
Nissan NES M7081 § 14 - Peeling strength PVC-Coated Fabric for Automobiles; § 14: Peeling strength testing procedure
Nissan NES M7081 § 13 - Static and permanent elongation PVC Coated Fabric for Automobiles; § 13: Constant load elongation rate and residual distortion rate testing procedure
Nissan NES M0602 § 16 - Peeling resistance Testing Methods of Genuine Leather and Polyurethane leather and polyvinylchloride coated fabric for Automobiles - § 16 Peeling resistance test method
Nissan NES M0402 (Method II)/M0403 - Determination of volatile organic compounds (VOC) VOC Test Method of Cabin Parts; Method 2 (M0403 = list of limit values)
Nissan NES M0160 - Odour test Method of testing the smell of interior parts
Nissan NES M0160 - Odour test Method of testing the smell of interior parts
Nissan NES M0160 - Odor test Method of testing the smell of interior parts
Nissan NES M0159-D - Scratch resistance Testing method of the scratch resistance of interior Polypropylene resin parts; Method D: D1) Evaluation of the change in whitening and D2) Evaluation of the change in gloss
Nissan NES M0154 § 35 - Cleanability test Testing methods of fabrics for automobiles; § 35: Cleanability test method
Nissan NES M0154 § 34 - Water staining Testing methods of fabrics for automobiles; § 34: Water stain test method
Nissan NES M0154 § 33.2 method II, based on - Soil resistance (soiling and cleanability) Testing methods of fabrics for automobiles; § 33.2: Soil resistance, test method II
Nissan NES M0154 § 33.1 - Soil resistance Testing Methods of fabrics for Automobiles § 33.1 Soil resistance test method
Nissan NES M0154 § 26 - Air permeability Testing methods of fabrics for automobiles § 26 Air permeability test method
Nissan NES M0154 § 23 - Scratch resistance test method II (Mace method) Scratch resistance test method II (Mace method)
Nissan NES M0154 § 19 - constant load elongation Testing method of fabrics for Automobiles § 19 Constant load elongation percentage test method
Nissan NES M0154 § 18.1 - Abrasion strength (Method 1, taber abraser) Testing methods of fabrics for automobiles; § 18.1: Abrasion strength test method (Method 1, Taber abraser)
Nissan NES M0154 § 15 - Seam strength Testing methods of fabrics for automobiles; § 15: Seam strength test method
Nissan NES M0154 § 14 - Tear strength Testing Methods of Fabrics for Automobiles § 14 Tear Strength Test Method
Nissan NES M0141: Methods of test for coating of synthetic resin paints used to coat synthetic resin materials and chrome plating
Nissan NES M0141 § 5.1, Variant 2 - Odor test Methods of test for coating of synthetic resin; § 5.1: Offensive odor (100 °C, 4 h)
Nissan NES M0141 § 5.1, Variant 1 - Odor test Methods of test for coating of synthetic resin; § 5.1: Offensive odor (Room temperature, 24 h)
Nissan NES M0141 % 6.2.1 - Pencil scratch test, by hand Methods of test for coating of synthetic resin, § 6.2.1 Pencil scratch test, by hand
Nissan NES M0135-1 (interior) - Weathering and light stability Weatherability and light resistance test methods for synthetic resin parts
Nissan NES M0135-1 (inside cabin) - Weatherability and light resistance Weatherability and light resistance test methods for Synthetic Resin Parts (Method 1: inside cabin)
Nissan NES M0134 - Falling ball impact test Falling ball impact test methods for synthetic resin parts
Nissan NES M0133, Methode 4 - chemical resistance Testing methods of chemical resistance for plastic parts - Method 4: Parts inside engine compartment, dripping
Nissan NES M0133, Method 5 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 5: Interior and exterior Parts (ABS, PMMA, PC, PPE, PAT), by application
Nissan NES M0133, Method 3 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 3: Exterior parts, by Dripping
Nissan NES M0133, Method 2 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 2: Interior parts, by wiping
Nissan NES M0131 - High Temperature Test (Irradiation Testing) Methods of high temperature test for passenger compartment synthetic resin parts
Nissan NES M0094 - received condition - Burning behaviour Test method of flammability of interior materials for automobiles (as received)
Nissan NES M0094 - received condition - Burning behaviour Test method of flammability of interior materials for automobiles (original)
Nissan NES M0094 - received condition - burning behaviour Test method of Flammability of materials for automobiles
Nissan NES M0094 - after aging - Burning behaviour Test method of flammability of interior materials for automobiles (after ageing)
Nissan NES M0094 - after aging - burning behaviour Test method of Flammability of materials for automobiles
Nissan NES M0094 - after ageing - Burning behaviour Test method of flammability of interior materials for automobiles (after ageing)
Nissan NES M0076 § 16 - Abrasion Resistance Test Methods for Automotive Carpet; § 16: Test Method for Abrasion Resistance
Nissan NES M0076 § 14 - Tuft binding strength test method Test Methods for Automotive Carpet; § 14: Tuft binding strength test method
Nissan NES M0076 § 13 - Tear strength test method Test Methods for Automotive Carpet; § 13: Tear strength test method (Trapezoid)
Nissan NES M0076 § 12 - Tensile strength and elongation test method Test Methods for Automotive Carpet; § 12: Tensile strength and elongation test method
Nissan E 21421NDS02: Nissan Design-Specification - aktive grille shutter For active grille shutter provided in the engine compartment. (Grille-integrated active grille shutters are not included.)
Nissan E 21421NDS02 § 6.10 - High pressure car wash resistance High pressure car wash resistance
Nissan - Seam strength General test method - Nissan - Seam strength (eg. Nissan NES M0602 § 13)
NIO-TP.GS.004-2017 - Determinaton of VOC (bag method) Determination of volatile organic compounds from non-metallic automobile interior materials - 10 l tedlar bag method
NIO-TP.GS.003-2016 - Fogging (gravimetric) Determination of fogging characteristics of vehicle trim parts and materials
NIO-TP.GS.002-2016 (Variant 3) - Odor test Determination of the odor characteristics of trim materials in vehicles (variant 3)
NIO-TP.GS.002-2016 (Variant 2) - Odor test Determination of the odor characteristics of trim materials in vehicles (variant 2)
NIO-TP.GS.002-2016 (Variant 1) - Odor test Determination of the odor charcteristics of trim materials in vehicles
NIO TP DUR-019 § 17 - Perspiration resistance Paint performance requirements for interior plastic parts
NIO TP DUR-019 § 16 - Resistance to suntan lotion and insect repellent Paint performance requirements for interior plastic parts
NIO TP DUR-019 § 15 - Soiling and Cleanability Paint performance requirements for interior plastic parts § 15 Soiling and cleanability: grease and coffee soiling agents
NIO TP DUR-019 § 13 - Resistance to water and soap spotting NIO TP DUR-019 § 13 Resistance to water and soap spotting
NIO TP DUR-019 § 11 - Resistance to Scratching Paint performance requirements for interior plastic parts § 11 Resistance to scratching
NIO TP DUR-019 § 09 - Resistance to high pressure cleaning operations Resistance of painted plastic parts to high pressure cleaning operations
NES M0603 §7 - Content rate of ether soluble substance Test method of Felts for Automobiles - §7 Content rate of ether soluble substance
NES - M7081 - Polyvinylchloride Coated Fabric for Automobiles e.g. Roof trim, Seat side gusset
NES - M0076 - Test Methods for Automotive Carpet Carpet
Modified oil staining test for Leather Modified oil staining test for Leather
Mitsubishi ES-X83252 - VOC measuring method of interior materials VOC measuring method of interior materials
Mitsubishi ES-X83244: Standard Test Method - Molded Plastics (For Exterior Parts) Plastic parts for exterior applications
Mitsubishi ES-X83238: Standard Test Method - Plastics Elastomer for Exterior RIM and R-RIM urethane, olefine based thermoplastic elastomers, modified polypropylene for exterior parts
Mitsubishi ES-X83238 § 3.8 - Heat sag Standard test method - Plastics elastomer for exterior; § 3.8: Heat sag
Mitsubishi ES-X83220 § 4.14.1A - Light Resistance Test Standard - Woven Fabrics, Knittings - Light Resistance (Xenon Arc Lamp)
Mitsubishi ES-X83220 § 4.10 - Shift Strength Test standard - Woven fabrics, knittings; § 4.10: Shift strength
Mitsubishi ES-X83217 § 4.28 - Seam fatigue resistance Test standard - Polyvinyl chloride coated - Fabrics and polyvinyl chloride sheet - interior & exterior; § 4.28: Seam fatigue resistance
Mitsubishi ES-X60410 - Flammability Flammability of interior materials
Mitsubishi ES-W83217/ ES-X83217 § 4.12.2 - Carbon arc light resistance Fabrics and Sheets - Fade Resistance - Method B
Mitsubishi - Odor - Odor test
Misuse Test Misuse Test
Mildew resistance - Storage in a desiccator Mildew resistance - General test method - Storage in a desiccator with water
Mikrotomschnitt
Migration staining Migration staining
Microscopy Microscopy
Microscopical analysis, procedure after Stratmann Textiles: microscopical analysis, procedure after Stratmann
Method book BGK e.V. (RG) Self heating / grade of decompose
Meteorological data; sampling Meteorological data at sampling
Melting temperature (VW, DSC) - Determination of melting behaviour (DSC) Melting temperature by DSC (dynamic scanning calorimetry)
McLaren MSL.10.23.0007: Paint Performance, Durability & Application Testing Requirements for exterior paint
McLaren MSL.03.05.0012: Lower Trim specification Lower Trim in the interior compartment
McLaren MSL.03.05.0011: Tunnel Console Test Specification Tunnel console in the interior compartment
McLaren MSL.03.05.0004: Facia Test Specification Instrument Panel Assembly / For facia and facia console in the interior compartment.
McLaren MSL.03.05.0004: Facia Test Specification Instrument Panel Assembly / For facia and facia console in the interior compartment.
McLaren MSL.03.05.0003: Door Trim test specification For door trim in the interior compartment
McLaren MCL Q.S. 10: Paint Performance, Durability & Application Testing
MBN 55555-6 § 5.7 - Abrasion Abrasion resistance of the flock
MBN 55555-6 § 5.12 - Heat resistance - folded exposure Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.12 Heat resistance - folded exposure
MBN 55555-6 § 5.10 - Coefficient of slding/ adhering friction Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.10 Coefficient of friction
MBN 55555-6 § 5.1 - Scratch resistance (against fingernail or knife blade) Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.1 Exposure to scratches
MBN 161216 - Bending test Determination of bending properties of sandwich composites
MBN 15306-4 § 5.2 / DIN EN ISO 11640 - Colour fastness (Veslic abrasion) Test methods for material systems and components - Part 4: resistance tests - § 5.2 Abrasion resistance to sun cream test substance - for leather Veslic as per DIN EN ISO 11640
MBN 15306-3 § 5.21 - Coefficient of gliding/ sticking friction Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.21 Coefficient of friction
MBN 15306-3 § 5.16 - Heat resistance - folded exposure Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.16 Heat resistance - folded exposure
MBN 15306-3 § 5.15 - Scratch resistance (against fingernail or knife blade) Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.15 Exposure to scratches
MBN 10529 Annex A.2 - TnP test Electroplating-Compatible Design of Plastic Interior Components - Annex A, Test for inner stress of the carrier parts; A.2 TnP test
MBN 10494-6 § 5.9.1 - Artificial weathering - CAM 180 Artificial weathering - CAM 180
Mazda MES MN 405S § 7.9.1 - Seam strength Mazda - Determination of the seam strength
Mazda MES MN 405S § 7.23.1 A (Xenon arc) - Method a - Colour fastness to light (Xenon arc method) Xenon arc lamp equivalent to JIS B 7754
Mazda MES MN 405S § 7.22.2 - Stain resistance (water spotting) Stains
Mazda MES MN 405S § 7.22.1 - Color fastness to wash / immersion Color fastness to wash
Mazda MES MN 405S § 7.18 - Dust adhesion and removability Dust adhesion and removability
Mazda MES MN 400X - Fabrics, Carpets, and Unwoven Fabrics For Automobiles Outer woven / knit fabrics mainly used for automobile seats and linings (referred to as "fabrics"), and pile carpets and felt-like unwoven fabrics mainly used for automobile floors and others (referred to as "carpets(s)" and "unwoven fabric(s)" respective
Mazda MES CF 055 B - Odor test Odor from cabin parts
Mazda MES CF 050D - Burning behaviour Flammability of Interior parts
Mass determination, weighing Mass determination, weighing
Mass balancing Mass balancing
Mar resistance as per Oesterle - Scribing sensitivity Mar resistance
Manual function control under load General method - Manual function control under load
Manual function control Manual function control
MAN M3658 - Hardness test (shore AO) Hardness testing- PUR integral foam - Steering wheel rim
MAN M3228: Resistance to tropical conditions of materials for the interior fittings of commercial vehicles Resistance to tropical conditions of materials for the interior fittings of commercial vehicles, such as curtain materials, textile upholstery, trim parts, floor coverings, and similar items.
MAN M 3683 - Soiling and cleaning behaviour Soiling and cleaning behaviour of plastic components in the vehicle interior - Test instruction
MAN M 3657 - Cream resistance Surfaces in the vehicle interior - Cream resistance - Test instructions
MAN M 3594: Burning behaviour of materials Burning behavior (ignitability, burning rate and melting behavior) of interior trim materials and all insulation materials of N2 and N3 (truck), M2 and M3 motor vehicles (buses) installed in the engine compartment and in any separated heater compartment
MAN M 3594: Burning behavior of materials Burning behavior (ignitability, burning rate and melting behavior) of interior trim materials and all insulation materials of N (truck), M2 and M3 motor vehicles (buses) installed in the engine compartment and in any separated heater compartment
MAN M 3577 - Snag test Upholstery cover materials - Snag test
MAN M 3528: Surface resistance of polymeric materials in interior and exterior Plastic surfaces for interior and exterior (injected, uncoated, grained, laminated, back injected)
MAN M 3524: Steering wheel cover made of PUR integral foam and leather Steering wheel cover
MAN M 3516:General requirements for mechanical systems, Proof of functional and quality capability For testing the purely mechanical properties of components and systems for vehicles of MAN Truck & Bus AG (MTB).
MAN M 3237: Thermoplastic elastomers TPE-S (Styrene-olefin block copolymers) - Material delivery conditions For thermoplastic elastomers with an elastomer phase based on styrene block copolymers.
MAN M 3044: Upholstery Fabrics
MAN M 3043: Curtain fabrics
MAN 321: Plastics - Acrylonitrile butadiene styrene (ABS) - Material delivery conditions High impact strength plastics
MAN 277 - Scratching with knife Adhesion test (scratching test)
Mace Snag Test - Determination of the thread puller tendency (Mace Snag Test)
LV 124 § 15.1.2 - Chemical resistance Electrical and electronic components in motor vehicles - Environmental requirements and testings § 15: Chemical requirements and tests
Leaching of solid materials (Batch test) Watery elution of solid materials (Batch test)
LC/MS LC/MS Messungen
LAW 112 - Determination of the free and the hydrolysed formaldehyde content Japanese Method: Determination of formaldehyde concentration
Landrover LRLTM.30.MS.302 - Burning behaviour Flammability of interior materials
Küster ADS 0150 - porosity testing Porosity testing of plastic parts
KIA - MS 216-03 - Material Specification
JIS L 0849 (Crockmeter) / DIN EN ISO 105-X12 - Colour fastness to rubbing Test methods for colour fastness to rubbing - Type I rubbing tester (crockmeter)
JIS L 0842 - Colour fastness to carbon arc lamp light Test methods for colour fastness to enclosed carbon arc lamp light
JIS K6251 - Tensile stress-strain properties Rubber, vulcanized or thermoplastic- Determination of tensile stress-strain properties
JIS K 5600-5-6 - Cross-cut test Testing methods for paints - Part 5: Mechanical property of film - Section 6: Adhesion test (Cross-cut test)
JIS K 5600-4-3 - Visual comparison of colour Testing methods for paints - Part 4: Visual characteristics of film - Section 3: Visual comparison of the colour of paints
JASO M902 - Determination of VOC emission Road vehicles - Interior parts and materials - Measurement methods of diffused volatile organic compounds (VOC)
JASO M 403 § 6.7 - Seam weariness Test method for automotive seat trim fabrics; § 6.7: seam weariness
JASO M 403 § 6.6 - Determination of seaming strength Test method for automotive seat trim fabrics; § 6.6: seaming strength
JASO M 403 § 6.5 - Static and permanent elongation Test method for automotive seat trim fabrics; § 6.5: static and permanent elongation
JASO M 403 § 6.4.2.2 method B - Tearing strength (trapezoid method) Test method for automotive seat trim fabrics; § 6.4.2: Tearing strength (Method B, trapezoid)
JASO M 403 § 6.3.2 - Tensile properties Test method for automotive seat trim fabrics; § 6.3.2: Tensile strength and elongation percentage
JASO M 403 § 6.20 - Burning behaviour Test method for automotive seat trim fabrics; § 6.20: Inflammability
JASO M 403 § 6.12.2.1 method A - Pilling (ICI-type tester) Test method for automotive seat trim fabrics; § 6.12: Pilling (method A, ICI-type tester)
JASO M 403 § 6.10 - Resistance to rubbing Test method for automotive seat trim fabrics; § 6.10: Resistance to rubbing
JASO M 403 § 6.1 - Determination of mass per unit Test method for automotive seat trim fabrics; § 6.1: Mass per unit area
JASO M 403 § 6.11.2.1 method A - Abrasion test (Taber) Test method for automotive seat trim fabrics; § 6.11.2: Frictional resistance (method A, taber abrasion)
JAMA measurement method - Determination of organic emissions organic emissions from vehicle interior measurements
Jaguar TPJLR.52.451 - Transparancy, translucence Fabric Transparency
Jaguar TPJLR.52.425 - Trapezoid Tear Strength Trapezoid Tear Strength
Jaguar TPJLR.52.422 - Deformation behavior (indentation and recovery) Determination of the Indentation and Recovery of Foam Parts
Jaguar TPJLR.52.254 - Corrosion test Calcium Chloride Accelerated Corrosion Test (Russian Mud Test)
Jaguar TPJLR.52.010 - Mar resistance (Erichsen 430-PI Assessment of mar performance - gloss assessment method
Jaguar TPJLR 52.459 - Electrical Resistance Determination of the electrical resistance of Textile Fabrics
Jaguar TPJLR 52.458 (VDA 270 Variant 3) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.458 (VDA 270 Variant 2) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.457 - Resistance to fibre show through of perforated leather Resistance to fibre show through of perforated leather
Jaguar TPJLR 52.095 - Determination of VOC Emissions Determination of VOC Emissions - Small Bag Method
Jaguar TPJLR 52.008 - Scratch Resistance Assessment of Scratch Performance - Crosshatch Method
Jaguar STJLR.51.5181 - Self adhesive tape System Self Adhesive Tape Systems
Jaguar STJLR.51.5142: Material Performance - Seating Foams Seating foams (typically polyurethanes), including head restraints, cushions, bolsters, armrests
Jaguar JNS 30.60.08-C - Susceptibility to amine staining (Method C) Determination of susceptibility to Amine Staining, Method C (foam and imitation leather combination )
Jaguar JNS 30.60.08-B - Susceptibility to amine staining (Method B) Determination of susceptibility to Amine Staining, Method B (foam)
Jaguar JNS 30.60.08-A - Susceptibility to amine staining (Method A) Determination of susceptibility to Amine Staining, Method A (imitation leather )
Jaguar JNS 30.32.04 - Resistance to heat ageing Resistance to heat ageing - General
Jaguar JNS 30.03.05 - Peel Strength Materials Tests - Peel Strength
Jaguar Cars & Landrover STJLR.51.5301: Performance Requirements of Exterior & Interior Rubber Parts for components of certain engine bay components
Jaguar Cars & Landrover STJLR.51.5301 - Performance Requirements of Rubber Parts Rubber components and assemblies for use on the interior, exterior, and certain under-bonnet areas, e.g. weatherstrips, door seals, floor mats, grommets
Jaguar Cars & Landrover STJLR.51.5301 - Performance Requirements of Rubber Parts Rubber components and assemblies for use on the interior, exterior, and certain under-bonnet areas, e.g. weatherstrips, door seals, floor mats, grommets.
Jaguar Cars & Landrover STJLR.51.5225 - Performance specification, interior trim assemblies for interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays
Jaguar Cars & Landrover STJLR.51.5225 - Performance specification, interior trim assemblies For interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays
Jaguar Cars & Landrover STJLR.51.5224:Instrument Panel Assembly Performance: Incorporating Flexible Cover Skin Material
Jaguar Cars & Landrover STJLR 51.5225: Performance specification: interior trim assemblies For interior trim assemblies such as door panels, pillar mouldings, headliners, carpeted trunk trim, and package trays.
Jaguar Cars & Land Rover STJLR.51.5381: Lacquered Decorative Finished Interior Trim Components (Veneers) For decorative lacquered finishers and in-mould foil decorated parts for interior trim applications
Jaguar Cars & Land Rover STJLR.51.5381 - Lacquered Decorative Finished Interior Trim Components For decorative lacquered finishers and inmould foil decorated parts for interior trim applications.
Jaguar Cars & Land Rover STJLR.51.5381 - Lacquered Decorative Finished Interior Trim Components For decorative lacquered finishers and inmould foil decorated parts for interior trim applications.
Jaguar Cars & Land Rover STJLR.51.5362: Material Performance - Heavy Duty Fabrics Heavy duty trim fabrics
Jaguar Cars & Land Rover STJLR.51.5361: Material Performance - Light Duty Fabrics Light duty trim fabrics for use on headlinings, pillar trims, sun visors
Jaguar Cars & Land Rover STJLR.51.5281: Material Performance - Polymeric Foils e.g. seat facings, seat backs, door casings
Jaguar Cars & Land Rover STJLR.51.5281 - Material Performance - Polymeric Foils e.g. Seat facings, Seat backs,Door casings
Jaguar Cars & Land Rover STJLR.51.5262: Performance Requirements of Non-Decorated Plastics
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5262 - Performance Requirements of Non-Decorated Plastics For plastic materials used in JLR components and assemblies for all areas of the vehicle. It applies to non-decorated plastic materials and components only. Typical methods of manufacture include injection moulding, blow moulding and extrusion.
Jaguar Cars & Land Rover STJLR.51.5242: Paint and Lacquer Performance - Interior For painted/lacquered interior trim materials (polymeric and metallic substrates). For painted (including soft painted, powder coated and lacquered) components used for automotive interior assemblies.
Jaguar Cars & Land Rover STJLR.51.5242 - Paint and Lacquer Performance - Interior For painted/lacquered interior trim materials (polymeric and metallic substrates). For painted (including soft painted, powder coated and lacquered) components used for automotive interior assemblies.
Jaguar Cars & Land Rover STJLR.51.5241:Performance Requirements of Exterior Painted Parts for all exterior painted body and trim components
Jaguar Cars & Land Rover STJLR.51.5229: Environmental Quality Requirements for interior materials and components For all surface materials on the interior of the vehicle with a surface area exceeding 100 cm_ (all colours).
Jaguar Cars & Land Rover STJLR.51.5229: Environmental Quality Requirements for interior materials and components For all surface materials on the interior of the vehicle with a surface area exceeding 100 cm_ (all colours).
Jaguar Cars & Land Rover STJLR.51.5223: Temporary protection systems for trim components Temporary protection systems that are used to prevent handling damage during vehicle assembly, transit and transportation
Jaguar Cars & Land Rover STJLR.51.5182: Performance Requirements of Labels All labels used for JLR vehicels
Jaguar Cars & Land Rover STJLR.51.5021: Performance Requirements of Acoustical and Thermal Assemblies materials used as thermal and acoustical insulators in vehicl inetrior, luggage compartment, engine compartment and underbody applications
Jaguar Cars & Land Rover STJLR.50.5151 - Performance Requirements of Chrome Plated Polymers e.g. Substrates - Rigid and flexible polymer blends, ABS, ABS/PC, nylon Plastic parts intended for plating
ISUZU SIC-F00-001 - Determination of the VOC emission The VOC concentration measuring method emitted from car parts
ISO/IEC 28360 / ECMA 328 - Emission rates Information technology - office equipment - Determination of chemical emission rates from electronic equipment
ISO 9867 - Wrinkle recovery Textiles - Evaluation of the wrinkle recovery of fabrics - Appearance method
ISO 9053 - Acoustics, airflow resistance Acoustics - Materials for acoustical applications - Determination of airflow resistance
ISO 8543 - Determination of mass Textile floor coverings - Methods for determination of mass
ISO 844 - Determination of compression properties Rigid cellular plastics - Determination of compression properties
ISO 8301 (DIN EN 12667) - Determination of steady-state thermal resistance Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
ISO 812-B - Procedure B: 50 % brittleness temperature Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness, Procedure B (determination of 50 % brittleness temperature)
ISO 812-A - Brittleness temperature (Procedure A) Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness; Procedure A (determination of brittleness temperature)
ISO 7784-1 - Determination of resistance to abrasion (Rotating abrasive-paper-covered wheel method) Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method
ISO 7765-2 - Impact resistance by the free-falling dart method - Instrumented puncture test Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test
ISO 7724-2 - Colour measurement Paints and varnishes - Colorimetry - Part 2: Colour measurement
ISO 7619-1 (Shore D) - Determination of Shore D hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method ( Shore hardness D)
ISO 7619-1 (Shore A) / testing in heat - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in heat
ISO 7619-1 (Shore A) / testing in cold - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in cold
ISO 7619-1 (Shore A) - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method ( Shore hardness A)
ISO 6452 (Fogging G) - Determination of the fogging characteristics (Fogging G) Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles (Fogging G, gravimetric)
ISO 6452 (Fogging F) - Determination of the fogging characteristics (Fogging F) Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles (Fogging F, reflectometric)
ISO 6209 - Determination of solvent-extractable material Rubber compounding ingredients - Carbon black - Determination of solvent-extractable material
ISO 554 - Standard atmosphere for conditioning Standard atmospheres for conditioning and / or testing - Specifications
ISO 527-2 - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 4919 (based on) - Tuft withdrawal force Carpets - Determination of tuft withdrawal force
ISO 3865-A1 Test in heat - Contact and migration staining Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material; Method A: contact and migration staining
ISO 3801 / ISO 6348 - Determination of mass per unit length and mass per unit area Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area
ISO 3795 - Burning behaviour Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 37 - Tensile properties Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37 (Examination in temperature chamber - heat) - Tensile properties Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 34-1-B - Tear strength (angle test piece) Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (here method B: angle test pieces)
ISO 2812-2 - Resistance to liquids - Water immersion method Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
ISO 2808 - Method 5A - Microscopic examination of cross-section Paints and varnishes - Determination of film thickness; § 10.2: Microscopic examination of cross-section (Method 5A)
ISO 2796 - Dimensional Stability Cellular plastics, rigid - Test for dimensional stability
ISO 2781-A - Determination of Density Rubber, vulcanized or thermoplastic - Determination of density (Method A - immersion method)
ISO 2549 - Determination of tuft leg length Hand-knotted carpets - determination of tuft leg length above the woven ground
ISO 247 method B - Determination of ash Rubber - Determination of ash
ISO 247 method A - Determination of ash Rubber - Determination of ash
ISO 2420 - Determination of apparent density Leather - Physical and mechanical tests - Determination of apparent density
ISO 22241-2 - NOx reduction agent AUS 32 Diesel engines - NOx reduction agent AUS 32 - Part2 : Test methods
ISO 2135 - Accelerated test of light fastness Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
ISO 20653 IPX8 - Resistance to liquids - Water immersion method Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
ISO 20433 - Colour fastness to crocking Leather - Tests for colour fastness - Colour fastness to crocking
ISO 1926 - Tensile properties Rigid cellular plastics - Determination of tensile properties
ISO 188 - Heat ageing Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 188 - Heat ageing Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 1766 - Determination of thickness of pile above the substrate Textile floor coverings - Determination of thickness of pile above the substrate
ISO 1765 - Determination of thickness Machine-made textile floor coverings - Determination of thickness
ISO 1763 - Determination of numbers of tufts and / or loops Carpets - Determination of number of tufts and/ or loops per unit length and per unit area
ISO 17202 - Untwist/retwist method Textiles - Determination of twist in single spun yarns - Untwist / retwist method
ISO 16750-5 - Chemical loads Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
ISO 1628-5 - Determination of viscosity number Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP), homopolymers und copolymers
ISO 1628-4 - Determination of viscosity number Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials
ISO 15797 - Industrial washing and finishing procedures Textiles - Industrial washing and finishing procedures for testing of workwear
ISO 15512-B - Determination of water content with Karl Fischer titration Plastics - Determination of water content; Method B: Water vaporization
ISO 1431-1-A - Ozone resistance Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 1431-1 (procedure A) - Ozone resistance Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 1407 - Determination of solvent-extractable material Rubber - Determination of solvent extract
ISO 12219-4 - Determination of volatile organic compounds Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
ISO 12219-4 (Porsche) - Determination of volatile organic compounds Interior air of road vehicles - Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
ISO 12219-4 (Daimler) - Determination of volatile organic compounds Interior air of road vehicles - Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
ISO 12219-3 N-Nitrosamines - Determination of the emissions of volatile organic compounds (N-Nitrosamines-Emission) Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method
ISO 12219-3 - Determination of the emissions of volatile organic compounds. Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method
ISO 12219-2 - Determination of volatile organic compounds Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method
ISO 12219-1: Interior air of road vehicles - Part 1: Whole vehicle test chamber - Specification and method for the determination of volatile organic compounds in cabin interiors
ISO 12219-1 - Determination of organic emissions Interior air of road vehicles - Part1 : Whole vehicle test chamber - specifications and method for the determination of volatile organic compounds in cabin interiors
ISO 11359-2 - Thermomechanical analysis (TMA) Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
IR drying IR drying
Internal test method - Emission of N-Nitrosamines in solids Determination of emission of N-Nitrosamine in solid matter
Infrared spectrometry Infrared spectroscopy without data interpretation
Infrared microscopy (IR) Infrared microscopy (IR)
Indian Standard IS 15061, Annex A - Burning behaviour - Determination of horizontal burning rate Automotive Vehicles - Flammability requirements - Annex A: Test to determine the horizontal burning rate of materials
i.A. DIN EN ISO 17353 - F13 (mod. for solids ) - Determination of organic stannous compounds Water quality - Determination of selected organotin compounds - Gas chromatographic method (F13)
i.a. DIN EN 12766 (ECD) polybromine biphenyle/ biphenylaether (PBB/PBDE)
i.A. DIN EN 1122 - Determination of cadmium Kunststoffe - Bestimmung von Cadmium - Nassaufschlussverfahren
i.A. DIN 38409-H23-2 BIAS, German standard methods for the examination of water, waste water and sludge- Parameters characteriing effects ans substances ( group H ) Part 23, Determination of bismut active substances ;DRAGENDORFF-REAGENZ (BiAS)
Hyundai/KIA Softening point - Determination of the softening point of laminates e.g. Hyundai/KIA MS 320-11 § 4.14, Hyundai/KIA MS 300-32 § 4.23.2
Hyundai/KIA MS322-04: Genuine leather - Seat covering applies to genuine leather used in automotive as seat covering
Hyundai/KIA MS257-06: Urethane slab foam - Interior for use in cushion and lining material of seats
Hyundai/KIA MS 655-08: Paint Hard Thermoplatic parts
Hyundai/KIA MS 655-08 § 4.21.1 - Abraision resistance for flat surfaces Paint - hard thermoplastic parts; § 4.21.1: Abraision resistance for flat surfaces
Hyundai/KIA MS 652-14: Painting - Hard thermoplastic parts
Hyundai/KIA MS 652-14: Painting - Hard thermoplastic parts
Hyundai/KIA MS 652-14 § 5.23.1 - Abrasion resistance, Flat surface Painting - Hard thermoplastic parts; § 5.23.1: Abrasion resistance, flat surface
Hyundai/KIA MS 652-12: Soft Feel Painting - Interior Plastic Parts
Hyundai/KIA MS 652-12 § 5.4 - Scratch resistance test Soft feel painting - Interior plastic parts; § 5.4: Scratch resistance test
Hyundai/KIA MS 330-03: Cotton Mat - Seat Cotton mat for seat cushion and backing material for vehicle
Hyundai/KIA MS 322-06: Top grain leather - steering wheel & horn pad Genuine leather used for interior parts generally used for manufacturing a steering wheel and horn pad cover.
Hyundai/KIA MS 322-05: Natural Leather - Laminated Soft Trim e.g. door trim, crash pad, console
Hyundai/KIA MS 322-05: Genuine Leather - Interior Trim e.g. door trim, crash pad, console
Hyundai/KIA MS 322-05 § 4.6 - Peeling strength Genuine Leather - Interior Trim; Peeling Strength
Hyundai/KIA MS 322-05 § 4.5 - Tear strength Genuine Leather - Interior Trim; Tear Strength
Hyundai/KIA MS 322-05 § 4.15 - Resistance to water Genuine Leather - Interior Trim; Resistance to water
Hyundai/KIA MS 322-05 § 4.14 - Sunscreen lotion resistance Genuine Leather - Interior Trim; Sunscreen lotion resistance
Hyundai/KIA MS 322-05 § 4.13.2 - Chemical resistance - Drop test Genuine Leather - Interior Trim; Chemical resistance - Drop test
Hyundai/KIA MS 322-05 § 4.13.1 - Chemical Resistance - AbrasionTest Genuine Leather - Interior Trim; Chemical Resistance - AbrasionTest
Hyundai/KIA MS 322-05 § 3.6 - Peeling strength Natural Leather - Laminated Soft Trim; Peeling strength
Hyundai/KIA MS 322-05 § 3.5 - Tear strength Natural Leather - Laminated Soft Trim; Tear Strength
Hyundai/KIA MS 320-05: Fabrics for Seat Fabrics for automotive seat cover
Hyundai/KIA MS 300-57 - Determination of VOC emission in a 1 m_ testing chamber Test method for VOCs emission from part assembly
Hyundai/KIA MS 300-55 § 4.4.2 - Organic substances and their emissions with TDS-GC-MSD Determination of volatile organic compounds from vehicle interior parts; §4.4.1: Determination of VOC and aldehydes from part using thermal desorption analysis method
Hyundai/KIA MS 300-55 § 4.2 - Determination of Formaldehyde Test method for volatile organic compounds release; §4.2: Measurement of formaldehyde
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC) Test method for the determination of the emissions of VOCs from vehicle interior parts
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC) Test method for the determination of the emissions of VOCs from vehicle interior parts
Hyundai/KIA MS 300-51 - Determination of grease content and pH value Test Methods Grease Content and pH for Genuine Leather
Hyundai/KIA MS 300-34 - Odor test Test method of odor for interior materials
Hyundai/KIA MS 300-32: Standard test method - Woven, knit For woven fabric and knits for use mainly in automotive seat covers and interior trim skins.
Hyundai/KIA MS 300-32 § 4.9.1 - Seam strength
Hyundai/KIA MS 300-32 § 4.14.1 - Fade Fastness Standard Test Method - Woven, Knit
Hyundai/KIA MS 300-31 § 4.3 - Thickness Standard Test Methods - Leather, A/Leather and Sheet § 4.3: Thickness
Hyundai/KIA MS 300-31 § 4.27 - Determination of the seam strength Standard Test Methods - Leather, A/Leather and Sheet § 4.27 Seam Strength
Hyundai/KIA MS 300-31 § 4.19 - Abrasion resistance (Taber Abraser) Standard Test Methods - Leather, A/Leather and Sheet § 4.19: Abrasion Resistance
Hyundai/KIA MS 300-31 § 4.13 - Tackiness Standard Test Methods - Leather, A/Leather and Sheet § 4.13: Tackiness Free
Hyundai/KIA MS 300-31 § 4.12.1/.2 - Fade resistance test (Xenon Arc) Standard Test Methods - Leather, A/Leather and Sheet § 4.12.1 + 4.12.2: Fastness Test
Hyundai/KIA MS 300-11 - Resistance to scuffing Method of testing resistance to scuffing of materials such as vinyl, genuine leather and luggage compartment mats
Hyundai/KIA MS 300-08 - Flammability resistance Flammability resistance - Interior materials
Hyundai/KIA MS 257-07: Soft Urethane Mold Foam - Seat Soft urethane mold foam (hereinafter called "mold foam") for use mainly in automotive cushion material
Hyundai/KIA MS 256-31 § 5.2 - Peel strength Dash isolation pad assy; § 5.2: Peel strength
Hyundai/KIA MS 252-08: Crosslinked Polyethylene Foam Sheet Pad of interior trim
Hyundai/KIA MS 213-42: Scratch Resistance PP Copolymer - Injection Molded Interior and Exterior Parts
Hyundai/KIA MS 211-54: PA6, PA66 Wheel cover
Hyundai/KIA MS 211-47: PA66 Oil guide connector radiator inlet/outlet tank // Hydro engine mount nozzle
Hyundai/KIA MS 210-06 § 4.4.2 - Weatherability test Molded plastic parts - Exterior use § 4.4.2 Artificial Weatherability test
Hyundai/KIA MS 210-05: Molded Plastic Parts - Interior
Hyundai/KIA MS 210-05 § 4.9 - Scratch resistance Molded plastic parts - Interior use; § 4.9: Scratch resistance test
Hyundai/KIA MS 210-05 § 4.8 - Wear resistance Molded plastic parts - Interior use; § 4.8: Wear resistance
Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Interior use; § 4.7: Chemical resistance test
Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Interior; § 4.7: Chemical resistance test
Hyundai/KIA MS 210-05 § 4.5 - Fading resistance test Molded plastic parts - Interior; § 4.5: Fading resistance test (Method: Xenon Arc - equipment according to ISO 105)
Hyundai/KIA MS 210-05 § 4.3.1 - Heat cycle resistance test with infrared irradiation Molded plastic parts - Interior; § 4.3.1: Heat cycle resistance test
Hyundai/Kia MS 210-05 § 4.12 - Conduction resistance test (electrostatic behaviour) Molded plastic parts - Interior use; § 4.12: Conduction resistance test -electrostatic behaviour (based on)
Hyundai/KIA MS 200-38 § 4.3 - Heat cycle test with infrared irradiation Test Standard - Steering Wheel § 4.3 Heat Cycle Resistance Test
Hyundai/KIA MS 200-11 - Resistance to soil impregnation Soiling test for artificial leather and plastic sheet
Hyundai/KIA MS 200-08 - Migration staining Resistance of coated fabrics and plastic film to deterioration and migration staining
Hyundai/KIA KS M 6518 § 5 - Tensile test Physical test method for vulcanized rubber; § 5: Tensile test
Hyundai/KIA - MS 210-05 - Material Specification for molded plastics to use in general performance of automotive interior parts
Hyundai MS 343-11 § 4.14 - Crease Resistance Material specification - Crease Resistance
Hyundai MS 214-04: PC+ABS alloy Crash pad, interior trim etc.
Hyundai / KIA - abrasion resistance, plane surfaces allg. Abriebfestigkeit für Hyundai-Prüfpläne
House method: Phenol & derivatives with GC/MSD House method: phenols and derivatives by GC / MSD
Honda SMG 5460Z-SEA-0000 § 7.24 - Odor test Specification for assy trunk interior parts; §7.24: Odor strength
Honda HES D 6601-99A - Light resistance Accelerated test method for light resistance with xenon-arc lamp
Honda HES D 6508 (Method B - specular gloss) - Determination of fogging characteristics (Fogging F) Test method for fogging of interior materials for automobiles; Methode B: Method for measuring specular gloss (Fogging-F)
Honda HES D 6506: General Test methods for Fabrics General test methods for fabrics (woven and knitted fabrics) used mainly for seat covering materials of motor vehicles.
Honda HES D 6501-06 § 3.6 - Adhesion Test (cross cut test) General test methods for coating § 3.6 Adhesion Test (cross cut test)
Honda HES D 6501-06 § 3.3 - Gloss General test methods for coating; § 3.3: Gloss
Honda HES D 6501-06 § 3.12 - Anti-Tackiness Test General test methods for coating; § 3.12: Anti-Tackiness Test
Honda HES D 6003 - Flammability Flammability test method for automobile interior materials
Honda HES D 2500-10: General test methods of resin materials for vehicles For resin materials to be used for resin parts of vehicles (motorcycles and automobiles).
Honda HES D 2016: Quality Standards for General Coating (on Metals)
Honda DWG No. 0094Z-T7S-0000 - VOC Test Method VOC Test Method Specification for interior parts
Honda DWG No. 0094Z-T0A-0000 - VOC Test method VOC Test methods specification for interior parts
Honda DWG No. 0094Z-SNA-0000 - Determination of the VOC emission Specification for test method for VOC
Honda D 6507 § 4.16.2 - Odor Properties (at 80 °C) General test methods for floor carpet; § 4.16.2: Odor properties - at 80 °C
Honda D 6507 § 4.16.1 - Odor Properties (room temperature) General test methods for floor carpet; § 4.16.1: Odor properties - normal condition
Honda D 6507 § 4.13.1 - Light resistance with ultraviolet carbon-arc lamp General test methods for floor carpet; § 4.13.1: Light resistance with ultraviolet carbon-arc lamp
Honda 8460Z-TX6-0000: Test method specification for assy trunk interior parts for the automobile trunk associated parts (carpet materials, bases with covering materials such as non-woven fabric, and injection parts)
Honda 8460Z-TX6-0000 § 7-20 - Odor test Test method specification for Assy trunk interior parts; § 7-20: Odor test
Honda 8445Z-TGGA-A010-M1: Specification, RR Cargo Cover Assy RR Cargo Cover Assy
Honda 8373Z-TK8-A011-M1 § 6.13 - Odor Characteristics Sunshade assy specification; § 6.13: Odor Characteristics
Honda 8360Z-TR0-A000: Specification for Carpet - floor and trunk mats floor mat materials for cabin and trunk room of automobiles
Honda 8350Z-TLA-0000: General Spezification for door/side lining
Honda 8350Z § 6.21 - Odor test Door/Side Specification for General; § 6.21: Odor test
Honda 8350Z § 6-22 - Odor test Door/Side Lining General Specification, § 6-22 Odor test
Honda 8102Z-SLE-J000: Fabric Test method Specification - For Seat Fabric For Seat Fabric in automotive
Honda 7754Z-TZ5A-A000 § 6.21 - Odor test (at 80 °C) Wood Panel with open pore Finish § 6.21
Honda 7754Z-TZ5A-A000 § 6-21 - Odor test (Room temperatur) Wood Panel with open pore Finish Spezification for TZ5 - § 6.21 Odor
Honda 7060Z-TW1W-H000 § 4.7.1 - static deformation Sunshade Assy, Roll - Creep resistance - static deformation
Honda 0096Z-TLA-A000: The quality standard of coating on PP resin parts - Specification for ext parts Automobile exterior parts molded by PP resin material
Honda 0096Z-TLA-A000 § 4.3 - Pencil Scratch Hardness Test The quality standard of coating on PP resin parts - Specification for ext parts - § 4.3 Film hardness
Honda - Cleanability Honda - Cleanability (e.g. Honda 8102Z-SLE-J000)
Hole density
HJ/T measurement cycle according HJ-T 400 - Determination of organic emissions organic emissions from vehicle interior measurements
HJ/T 400: Standard of the General Administration of State Environmental Protection of PeopleÀs Republic of China - Determination of Volatile Organic Compounds and Carbonyl Compounds in Cabin of Vehicles Whole vehicle - Cabins of Vehicles
high precision snagging mace Equipment for Mace Snag device acc to VDA 230-220
HES D 6501-06 § 3.5 - Pencil Scratch Hardness Test General test methods for coating § 3.5 Pencil Scratch Hardness Test
Heavy metals in acidic sweat extract (DIN EN ISO 105-E04) Heavy metals in acidic sweat extract
Heat storage with infrared irradiation Heat storage with infared irridiation
Heat storage Heat storage
Heat retentivity Heat retentivity
Hardness/Grip test for padded materials General grip indentation measurement for padded materials
Haptics behaviour / touch test Haptics behaviour / touch test (e.g. DBL 7384 § 4.10)
Gulf Standard GS 98/1988 - Burning behaviour Motor vehicles flammability of interior materials and their testing methods
GMW 3232 - Flammability of Interior Trim Materials Burning behavior of Interior Trim Materials
GMW 3026: Material Specification - Carpet Materials for Floors and Floor Mats Carpet materials for floor applications and floor mats.
GMW 3026 - Carpet Materials for Floors
GMW 17577: Polyamide 6 - Impact Modified, Heat Stabilized, Extrusion Grade
GMW 17408: Material Specification - Flexible Expanded Rubber and Rubber-like Materials for Air,Dust, Noise, and Water Sealing Air and dust seals or water seals and gaskets, isolators, rattle protection, covers for gaps and other suitable applications
GMW 17408 Table A3 - Cycle test - Exterior Flexible Expanded Rubber and Rubber-like Materials for Air, Dust, Noise, and Water Sealing: Table A3: Cycle test - Exterior
GMW 17408 Table A1 - Cycle test - Exterior Flexible Expanded Rubber and Rubber-like Materials for Air, Dust, Noise, and Water Sealing: table A1: Cycle test - Exterior
GMW 16876: Material Specification - Metallized Interior Decorative Components For the first surface, vacuum-deposited metal coatings which are visible and intended for decorative interior plastic trim components.
GMW 16853: Comprehensive Standard for Overall Emission Testing of Interior Materials and Parts (Fogging, Odor, Emissions, Carbonyls, Amines) For materials and parts in the vehicle interior (fogging, emissions, carbonyls, amines)
GMW 16853: Comprehensive Standard for Overall Emission Testing of Interior Materials and Parts (Fogging, Odor, Emissions, Carbonyls, Amines For materials and parts in the vehicle interior (fogging, emissions, carbonyls, amines).
GMW 16830 - Tape lamination Tape lamination to automotive components
GMW 16522: Non-Woven Scrim or Facing Materials For non-woven polyester or polyester rayon blends used as facings or scrims on insulation materials primarily for use in the engine compartment.
GMW 16449 Method B - Fluid Compatibility Electrical component fluid compatibility - Method B - Brush cleaning
GMW 16449 Method A - Fluid Compatibility Electrical component fluid compatibility - Method A - Normal cleaning
GMW 16443: Adhesion Performance Requirements for Adhesive Backed Light Trim and Foam Adhesive backed light trim and foam bonded to painted or unapinted substrates (metal, plastic, glass) - air, dust and water seals
GMW 16214: Polypropylene expanded bead foam Typical applications include the following: bumper energy absorbers, knee bolsters.
GMW 15816 - Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored e.g. seal belt sleeves, key pads, mats
GMW 15816 - Thermoplastic Elastomers - Polyolefinic, Fully Crosslinked, Interior, Integrally Colored This specification covers the properties of natural, Ultraviolet (UV) and heat stabilized, thermoplastic vulcanizates (TPV) containing fully crosslinked Ethylene-Propylene-Diene Monomer (EPDM) elastomer particles dispersed in a continuous polypropylene (P
GMW 15702 - Material Specification Plastics: Plastic Molding Compounds
GMW 15581: Material Specification - Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Unfilled Unfilled acrylonitrile plastic, ABS, styrene, styrenic, butadiene, acrylonitrile, polycarbonate styrene and polycarbonate blends, used in injection components
GMW 15581 - Material Specification Plastics: Acrylonitrile Butadiene Styrene and Polycarbonate Blend, unfilled
GMW 15572: Acrylonitrile Butadiene Styrene - Unfilled
GMW 15473: Material Specification General - Flexible Expanded Rubber Materials for Air, Dust, Noise, and Water Sealing For flexible expanded materials, to be used as air and dust seals or water seals and gaskets. These materials may also be used as noise isolators, covers for gaps and other suitable applications.
GMW 15063: Polyolefin Foams for General Applications
GMW 15058 - Material Specification - Polyurethane Foam for Trim Pads, Headliners, Sealing and Insulators Polyurethane (PUR) slab foam (polyether or polyester polyols) for use in automotive laminated seat upholstery fabrics, trim pads, insulators, headliners, sunshade, etc.
GMW 15058 - Material Specification - Polyurethane Foam for Trim Pads, Headliners, Sealing and Insulators Polyurethane (PUR) slab foam (polyether or polyester polyols) for use in automotive laminated seat upholstery fabrics, trim pads, insulators, headliners, sunshade, etc.
GMW 14892 § 3.5 (visual) - Adhesion, visual evaluation Adhesion requirements for bonded interior parts - Adhesion, visual evaluation
GMW 14892 § 3.4 (peel strength) - Adhesion Adhesion requirements for bonded interior parts - peel strength
GMW 14892 § 3.1.5.2 (visual) - Adhesion, visual evaluation Adhesion requirements for bonded interior parts - Adhesion, visual evaluation
GMW 14892 § 3.1.5.1 (peel adhesion) - Peel adhesion Adhesion requirements for bonded interior parts - peel adhesion
GMW 14838: Overhead and Rear Window Trim Substrates
GMW 14722: Material Spezification - Elastomeric Floor Mats Elastomeric Floor Mats
GMW 14701 Method 4 - Resistance of coatings to chemical (drop test at climat storage) Resistance of coatings to chemical etching and distortion - Method 4
GMW 14701 Method 3 - Resistance of coatings to chemical (drop test at elevatet temperature) Resistance of coatings to chemical etching and distortion - Method 3
GMW 14701 Method 2 - Resistance of coatings to chemical (drop test at room temperature) Resistance of coatings to chemical etching and distortion - Method 2
GMW 14669: Organic Coating Performance for Exterior and Interior Metallic Components Organic Coating Performance for Exterior and Interior Metallic Components
GMW 14668: Minimum performance reqirements for decorative chromium plated plastic parts basic requirements for copper-nickel-chromium electroplated plastic parts, including
GMW 14668 - Material Spezifikation Finish - Minimum performance requirements for decorative chromium plated plastic parts basic requirements for Copper-Nickel-Chromium electroplated parts, including assamblies
GMW 14668 - Material Specification - Minimum performance requirements for decorative chromium plated plastic parts For copper-nickel-chromium electroplated plastic parts, including assemblies.
GMW 14665: Anodic Oxidation Coating on Aluminum
GMW 14664: Powder Coat Finish Organic coatings (resin material ina final powdered state) for ferrous or nonferrous metallic substrates
GMW 14650: Performance requrements for exterior plastic parts mold-in-color, painted or hard coated exterior plastic parts
GMW 14650: Performance Requirements for Exterior Parts All exterior parts (plastic, rubber, textile, foam etc.) that are molded-in-color, painted or hard coated
GMW 14573: Global Performance Requirements for Labels
GMW 14553 - Material Specification Textiles - Security Shade Fabric Security shade fabric / For fabrics used in rear cargo or window areas. Fabrics covered by this specification are made from fibrous textile materials that are knit or woven in structure.
GMW 14553 - Material Specification Textiles - Security Shade Fabric Fabrics used in rear cargo or window areas (made from fibrous textile materials that are knit or woven in structure)
GMW 14552 Wind management fabric Wind management fabric
GMW 14363 - Identation Hardness Determination of Indentation Hardness of Foam Components at Constant Force
GMW 14357 (Humidity ageing / in glass vessel < 100 °C) - Resistance to Humidity ageing For cellular and related materials: Determination of Resistance to Humidity ageing
GMW 14357 (Humidity ageing / Autoclave > 100 °C) - Resistance to Humidity ageing Procedures of test for cellular and related materials - Determination of resistance to humidity ageing
GMW 14231: Material Specification - Interior Trim Fabrics Fibrous textile materials that are knit, woven, non-woven, or non-conventional in structure; also laminated fabric constructions and synthetic suede. - Type A: fabrics used for seating, incl. seat piping, and door trim panesl - Type B: fabrics used for ov
GMW 14194: Fibrous sound absorption materials sound absorbing materials
GMW 14194: Fibrous sound absorption materials Sound absorption material
GMW 14171 - Heavy Layer Sound Barriers and Decoupler Assemblies Heavy layer or sound barrier materials and their usage with sound absorbing or dissipative materials for noise decoupling assemblies
GMW 14129: Sewing thread Sewing thread for automotive sewing applications
GM/Opel TM 589800: Engineering Material Specification - Polyurethane foam Polyurethane foam
GM/Opel TM 228400: Material Specifications Body Equipment Loop-pile carpet with fine-serrate structure
GM/Opel GMW 8081 - Determination of organic emissions (TVOC) Static headspace GC-MS for interior materials, interior emissions, (TVOC, relative emission with headspace-technology)
GM/Opel GMW 6992 - Visual evaluation Visual appearance assessment
GM/Opel GMW 6754-A - Determination of electrostatic behavior Determination of electrostatic behavior of automotive textiles; Method A: Electrostatic resistance
GM/Opel GMW 4750 - Color Read-Through Color read-through of automotive fabrics
GM/Opel GMW 4749 - Pilling Characteristics Procedure for determining pilling characteristics of automobile textile materials
GM/Opel GMW 4726 - Water repellent properties (Spray test) Water repellent properties of automotive textiles
GM/Opel GMW 4217, wet - Dimensional Stability Dimensional Stability (wet)
GM/Opel GMW 4217, dry - Dimensional Stability Dimensional Stability (dry)
GM/Opel GMW 4217 - Dimensional Stability Dimensional Stability
GM/Opel GMW 4141 - Pile distortion - Environmental Pile distortion - Environmental (heat and humidity)
GM/Opel GMW 4090 - Determination of weave and yarn count Determination of weave and yarn count
GM/Opel GMW 4089 - Determination of laminate curl properties Procedure for determining laminate curl properties of foam laminated materials
GM/Opel GMW 3405 - Seam Fatigue Seam Fatigue for Automobile Textiles
GM/Opel GMW 3402-B - Cleaner Resistance Soil and cleaner resistance of automotive materials; Procedure B: Cleaner resistance
GM/Opel GMW 3402-A - Soil resistance Soil and cleaner resistance of automotive materials; Procedure A: Soil resistance
GM/Opel GMW 3387 - Determining fiber degradation Procedure for determining fiber degradation of automotive textiles (after exposure)
GM/Opel GMW 3347 - Lint pickup and retention Lint pickup and retention of textile materials
GM/Opel GMW 3326 - Tearing strength - Trapezoid Method Tearing strength of textile materials by trapezoid method
GM/Opel GMW 3286 - Neutral salt spray test (NSS test) Procedure for neutral salt spray test (NSS)
GM/Opel GMW 3283 - Schopper abrasion wear test Schopper abrasion wear test
GM/Opel GMW 3274 - Pile distortion - Mechanical Pile distortion - Mechanical (abrasion)
GM/Opel GMW 3259 - Mildew resistance Mildew resistance
GM/Opel GMW 3235-B - Fogging Characteristics of Trim Materials (Gravimetric Method) Fogging Characteristics of Trim Materials, Method B: Gravimetric Method (Fogging G)
GM/Opel GMW 3235-A - Fogging Characteristics of Trim Materials (Photometric Method) Fogging characteristics of trim materials; Method A: Photometric method (Fogging F)
GM/Opel GMW 3232 - received condition - Burning behaviour Test method for Determining the Flammability of Interior Trim Materials (as received)
GM/Opel GMW 3232 - after ageing - Burning behaviour Test method for determining the flammability of interior trim materials (after ageing)
GM/Opel GMW 3221 (Code B) - Standard Conditioning Standard Conditioning of Organic Materails - Code B: (22 ± 3) °C and (50 ± 10) % RH
GM/Opel GMW 3221 (Code A) - Standard Conditioning Procedure for Standard Conditioning of Organic Materials; Code A: (22 ± 3) °C und (50 ± 5) % RH
GM/Opel GMW 3220 - Laminate Bond Strength Laminate Bond Strength
GM/Opel GMW 3217 - Ravel Resistance Ravel Resistance
GM/Opel GMW 3211 - Determination of static and permanent elongation Resistance to stretch and set
GM/Opel GMW 3208 - Rotary Abrasion Test, Taber Type Rotary Abrasion Test, Taber Type
GM/Opel GMW 3205-C (105°C, without water) - Odour (Variant C) Determining the resistance to odor propagation of interior materials; Coding C: Dry, high temperature condition, 105 °C
GM/Opel GMW 3205-C (105°C, without water) - Odor (Variant C) Determining the resistance to odor propagation of interior materials, Coding C: DRY high temperature condition, 105 °C
GM/Opel GMW 3205-B (70°C, without water) - Odour (Variant B) Determining the resistance to odor propagation of interior materials; Coding B: Dry condition, 70 °C
GM/Opel GMW 3205-B (70°C, without water) - Odor (Variant B) Determining the resistance to odor propagation of interior materials, Coding B: Dry condition, 70 °C
GM/Opel GMW 3205-A (70°C, with water) - Odour (Variant A) Determining the resistance to odor propagation of interior materials; Coding A: wet condition, 70 °C
GM/Opel GMW 3205-A (70°C, with water) - Odor (Variant A) Determining the resistance to odor propagation of interior materials, Coding A: wet condition, 70°C
GM/Opel GMW 3182 - Determination of Mass per Area Determination of Mass per Area
GM/Opel GMW 3154 - Mandrel bend test Mandrel Bend Test
GM/Opel GMW 3016 - Organic Volatiles in Sealers and Adhesives Test for organic volatiles in sealers and adhesives
GM/Opel GMW 3010, Code C - Tensile properties for threads Tensile properties for threads
GM/Opel GMW 3010 - Tensile properties Determination of Tensile and Elongation Properties
GM/Opel GMW 3007 TM-60 / Draft (BST 100 °C) - Determination of Colour Fastness to Artificial Light Determination of Colour Fastness to Artificial Light; Code 2: 100 °C
GM/Opel GMW 16910: Decorative Graphics on Powertrain Components - Material Specification e.g. hot stamp foils, ink pad printing
GM/Opel GMW 16717: Decorative Interior Laminates and Films Requirements for interior decorative films and laminates. Typical applications include, but are not limited to, door trim spears, door pull accents, switch plates, steering wheel rims, console trim, instrument panel trim, integrated center stack trim, and
GM/Opel GMW 16717: Decorative Interior Laminates and Films
GM/Opel GMW 16597: Carpet Materials for Non-Floor Applications - Material Specification For carpet materials that are suitable for non-floor applications, such as rear seat back, lower door trim, toe bar covers, trunk lining, load floor areas, lower instrument panels, and consoles.
GM/Opel GMW 16526 - Water absorption Water absorption
GM/Opel GMW 16348: Functional, Non-visible, Interior Trim System Minimum Material - Performance Requirements For interior materials intended for non-visible applications e.g. air caps, stuffer foams, filler panels, srims, non-foam seat cushions, etc.
GM/Opel GMW 16348: Functional, Non-visible Interior Trim System, Minimum Material Performance Requirements e.g. air caps, stuffer foams, filler panels, scrims, non-foam seat cushions, after sales custom textile products, one time use textiles, cardboard laminates
GM/Opel GMW 15891 - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates, media resistance
GM/Opel GMW 15891 - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates, media resistance
GM/Opel GMW 15793 - Ice Scraper damage test Window seals and moldings - Ice scraper damage test
GM/Opel GMW 15757: Low Wear Non-Woven Carpet for Protected Applications Low wear non-woven carpet materials used on entry level vehicles with special provisions for testing and usage, including mandatory floor mats and complete protection of the ingrss/egress areas and protection of the transmission tunnel areas
GM/Opel GMW 15651 - Hook Fastener Resistance Hook Fastener Resistance (Martindale method)
GM/Opel GMW 15635 - Determination of aldehyde and ketone emissions Determination of Aldehyde and Ketone Emissions from Interior Materials
GM/Opel GMW 15634 - Evaluation acc. to GMW 3059 - Determination of volatile and moderately volatile organic components Determination of volatile and semi-volatile organic compounds in materials of automotive interior
GM/Opel GMW 15634 - Determination of volatile and moderately volatile organic components Determination of volatile and semi-volatile organic compounds in materials of automotive interior
GM/Opel GMW 15600 - Determination of aldehyde and ketone emissions Determination of Aldehyde and Ketone Emissions in Vehicle Interior Cabin Air
GM/Opel GMW 15516: Interior Paint for Styrenics Interior, waterborne or solventborne, one or two component paint system for use on parts made of paintable styrenics including acrylonitrile butadiene styrene (ABS), polycarbonate (PC), and acrylonitrile butadiene styrene plus polycarbonate (ABS+PC) blend
GM/Opel GMW 15468: Hydrolytic Resistance of Polyamid to Coolants plastics
GM/Opel GMW 15432-B - Irradiation Testing Irradiation test; Code B: 1 cycle in radiation chamber
GM/Opel GMW 15432-A - Heat storage with infrared radiation Irradiation test; Code A: 3 cycles in radiation chamber (mit IR heaters)
GM/Opel GMW 15377 - Staining and cleaning Staining and cleaning of leather and plastic roll goods
GM/Opel GMW 15015: Elastic and Non-Elastic Cords and Straps Elastic cords surrounding mesh fabric map pockets or surrounding convenience nets in occupant area or trunks of the vehicle.
GM/Opel GMW 14885 § 4.4.13.2 - Accelerated Weathering Painted aluminium road wheels - Paint performance requirements; § 4.4.13.2: Accelerated weathering (Xenon-Arc-Test)
GM/Opel GMW 14872 - Cyclic corrosion laboratory test Cyclic corrosion laboratory test
GM/Opel GMW 14872 - Cyclic corrosion laboratory test Cyclic corrosion laboratory test
GM/Opel GMW 14872 - Corrosion cycle test Cyclic Corrosion Laboratory Test
GM/Opel GMW 14867: Performance Requirements of Paints on Interior Plastic Substrates Paints on Interior Plastic Substrates
GM/Opel GMW 14867: Performance Requirements of Paints on Interior Plastic Substrates For Paints on Interior Plastic Substrates. Coatings can be applied to plastic substrates,flexible substrates, rigid substrates or integral skin foam systems.
GM/Opel GMW 14867 § 3.6 - Effects of cleaners and lotions Performance requirements of paints on interior plastic substrates; § 3.6: Effects of cleaners and lotions
GM/Opel GMW 14867 § 3.3 - Cure Test Performance requirements of paints on interior plastic substrates; § 3.3: Cure test
GM/Opel GMW 14864 - Staining due to Sulfur Dioxide (SO2) and Hydrogen Sulfide (H2S) Procedure to determining the staining of trim materials due to sulfur dioxide, SO2 and hydrogen sulfide, H2S
GM/Opel GMW 14864 - Staining due to Sulfur Dioxide (SO2) and Hydrogen Sulfide (H2S) Procedure to determining the staining of trim materials due to sulfur dioxide, SO2 and hydrogen sulfide, H2S
GM/Opel GMW 14829-B - Adhesion test for paint (X-cut test) Tape Adhesion Test for Paint Finishes; Method B: X-cut test
GM/Opel GMW 14829-A - Adhesion test for paint (Crosshatch) Tape Adhesion Test for Paint Finishes; Method A: Crosshatch test
GM/Opel GMW 14829 - Crosshatch test Tape Adhesion Test for Paint Finishes (Crosshatch test)
GM/Opel GMW 14797: Painted Plastic Parts Performance Requirements This standard covers organic surface coatings on plastic parts and components used for automotive exterior and interior applications on motor vehicles, and also for painted components within the engine compartment.
GM/Opel GMW 14797: Painted Plastic Parts Performance Requirements For organic surface coatings on plastic parts and components used for automotive exterior and interior applications on motor vehicles, and also for painted components within the engine compartment.
GM/Opel GMW 14797: Painted Plastic Parts Performance Requirements For organic surface coatings on plastic parts and components used for automotive exterior and interior applications on motor vehicles, and also for painted components within the engine compartment.
GM/Opel GMW 14777 - Determination of moisture content Test method for determining moisture content, water absorption and thickness swell of fiberboards, chipboards, cardboard, and similar rigid materials
GM/Opel GMW 14775 - Resistance to Snagging Resistance to Snagging of textile Materials
GM/Opel GMW 14729-B - High Humidity Test (wet bottom) Procedures for high humidity test; Option B: Wet bottom
GM/Opel GMW 14729-A - High Humidity Test (water fog) Procedures for high humidity test; Option A: Water Fog
GM/Opel GMW 14698-B - Scratch resistance Scratch resistance of organic coatings and self-adhesive foils; Method B: Rockwood five arm test device
GM/Opel GMW 14698-B - Scratch resistance Scratch resistance of organic coatings and self-adhesive foils; Method B: five arm test device
GM/Opel GMW 14698-A - Scratch resistance (Erichsen hardness test rod type 318) Scratch resistance of organic coatings and self-adhesive foils; Method A: Erichsen Hardness Test Rod type 318
GM/Opel GMW 14698-A - Scratch resistance (Erichsen hardness test rod type 318) Scratch resistance of organic coatings and self-adhesive foils; Method A: Erichsen Hardness Test Rod type 318
GM/Opel GMW 14695 - Cohesive strength Determining the cohesive strength of felts and similar materials
GM/Opel GMW 14688-A - Scratch resistance Scratch and mar resistance; Method A: Scratch resistance
GM/Opel GMW 14671 § 4.7.3 - Resistance to battery acid Organic coating performance for underhood and underbody components; § 4.7.3: Resistance to battery acid
GM/Opel GMW 14671 § 4.7.1 - Oil resistance Organic coating performance for underhood and underbody components; § 4.7.1: Oil resistance
GM/Opel GMW 14668 § 3.2.3.2 - Substrate surface stress test (only for ABS+PC) Minimum performance requirements for decorative chromium plated plastic parts; § 3.2.3.2: Substrate surface stress test (only for ABS+PC)
GM/Opel GMW 14668 § 3.2.3.1 - Substrate surface stress test (only for ABS) Minimum performance requirements for decorative chromium plated plastic parts; § 3.2.3.1: Substrate surface stress test (only for ABS)
GM/Opel GMW 14651: Material Related Interior Plastic Part Performance - Monolithic Plastic Parts and Injection Molded Plastic Substrates For plastic components and parts used for interior applications on automobiles. These are integrally colored monolithic plastic components and parts as well as plastic substrates materials for non-visible components and parts.
GM/Opel GMW 14458 - Copper-accelerated acetic acid salt spray test (CASS) Procedure for copper-accelerated acetic acid salt spray (CASS) test
GM/Opel GMW 14445 - Sunscreen and Insect Repellent Resistance Sunscreen and insect repellent resistance
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444: Material Related Interior Part Performance For all interior parts, e.g., Instrument Panel (IP) trim, side trim, floor trim, seat, console, etc.
GM/Opel GMW 14444 § 3.3.7 - Compatibility / migration staining Material related interior part performance; § 3.3.7: Compatibility / Migration Staining
GM/Opel GMW 14334 - Code C (Artificial Perspiration S.) - Chemical Resistance to Fluids Chemical Resistance to Fluids; Code C: Artifical perspiration solutions
GM/Opel GMW 14334 - Code C (artifical perspiration ) - Chemical Resistance to Fluids Chemical Resistance to Fluids; Code C: Artifical perspiration solutions
GM/Opel GMW 14334 - Chemical resistance to fluids Chemical resistance to fluids
GM/Opel GMW 14334 - Chemical resistance to fluids Chemical resistance to fluids
GM/Opel GMW 14296 - Perspiration resistance Perspiration Resistance
GM/Opel GMW 14236 - Determination of the release of formaldehyde Determination of the release of formaldehyde from molded parts for the vehicle interior
GM/Opel GMW 14231-3.2.13 - Antimicrobial Odor GM/Opel, Antimicrobial Odor
GM/Opel GMW 14162-D - Colorfastness to Artificial Weathering; Method D Colorfastness to artificial weathering; Method D: Light and dark exposure cycle
GM/Opel GMW 14162-C - Colorfastness to Artificial Weathering; Method C Colorfastness to artificial weathering; Method C: Light only exposure cycle (115 °C BST)
GM/Opel GMW 14162-B - Colorfastness to Artificial Weathering; Method B Colorfastness to artificial weathering; Method B: Light only exposure cycle (100 °C BST)
GM/Opel GMW 14162-A - Colorfastness to Artificial Weathering; Method A Colorfastness to artificial weathering; Method A: Light and dark exposure cycle
GM/Opel GMW 14148 - Resistance to Loop Pullout Resistance to Loop Pullout of Floor Carpet
GM/Opel GMW 14146 - Yarn Slippage Yarn Slippage
GM/Opel GMW 14141 - Dye migration Dye Migration
GM/Opel GMW 14134 - Softness Softness (Leather)
GM/Opel GMW 14132 - Resistance to Blocking Resistance to Blocking
GM/Opel GMW 14131 - Compatibility with Amines Compatibility of Interior Trim Materials with Amines
GM/Opel GMW 14131 - Compatibility with Amines Compatibility of interior trim materials with amines
GM/Opel GMW 14130 - Resistance to Marring or Scuffing Resistance to Marring or Scuffing
GM/Opel GMW 14127 - Impact Cold Crack Impact Cold Crack
GM/Opel GMW 14126 - Cold crack resistance Resistance to Cold Crack of Folded Materials
GM/Opel GMW 14125 - Appendix H / Code H - Linear Abrasion Testing (with paper clip) Linear Abrasion Testing - Test wedge with paper clip (Appendix H)
GM/Opel GMW 14125 - Appendix F / Code E - Linear abrasion ( with sandpaper) Linear abrasion test appendix E -Test wedge with sandpaper ( long stroke length)
GM/Opel GMW 14125 - Appendix E / Code D - Linear Abrasion (with sandpaper) Linear Abrasion testing appendix E Test wedge with sandpaper (short stroke length)
GM/Opel GMW 14125 - Appendix C / Code B - Linear Abrasion Testing (with brush) Linear Abrasion Testing - Test Brush
GM/Opel GMW 14125 - Appendix B / Code A - Linear Abrasion Testing (with sraper) Linear Abrasion Testing - Test Scraper
GM/Opel GMW 14124 -Cycle W, revised acc. to GMW 14892 - Interior adhesive/sealant humidity high temperature test cycle Automotive Environmental Cycles; Test cycle W: Interior adhesive/sealant humidity high temperature test cycle / climate cycle revised according to GMW 14892, issue 2012-04 (Adhesion requirements for bonded interior parts)
GM/Opel GMW 14124 - Test Cylcle O - Paint Crack Cycle (humidity and heat cycle) Automobil Umweltzyklen; Test Zyklus O: Lackschichtbeständigkeit
GM/Opel GMW 14124 - Test cycle W - Interior adhesive/sealant humidity high temperature test cycle Automotive Environmental Cycles; Test cycle W: Interior adhesive/sealant humidity high temperature test cycle
GM/Opel GMW 14124 - Test cycle T - Environmental simulation testing with autoclave Automotive Environmental Cycles; Test cycle T: Aging condition for bond strength and hydrolytic stability of laminated textiles materials (option to cycle Q)
GM/Opel GMW 14124 - Test cycle S - Accelerated aging of leather and plastic rolled goods Automotive Environmental Cycles; Test cycle S: Accelerated ageing of leather and plastic rolled goods
GM/Opel GMW 14124 - Test cycle R - Shrinkage of upholstery materials used for wrapping instrument panels (IP) and rear window trim (RWT) Automotive Environmental Cycles; Test cycle R: Shrinkage of upholstery materials used for wrapping instrument panels (IP) and rear window trim (RWT)
GM/Opel GMW 14124 - Test cycle Q - Aging condition for bond strength and hydrolytic stability of laminated textile materials Automotive Environmental Cycles; Test cycle Q: Ageing condition for bond strength and hydrolytic stability of laminated textile materials
GM/Opel GMW 14124 - Test cycle P - Covered door panel delamination/dimensional stability cycle Automotive Environmental Cycles; Test cycle P: Covered door panel delamination/dimensional stability cycle
GM/Opel GMW 14124 - Test cycle P - Covered door panel delamination/dimensional stability cycle Automotive Environmental Cycles; Test cycle P: Covered door panel delamination/dimensional stability cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle H - Dimensional Stability Test Cycle Automotive Environmental Cycles; Test cycle H: Dimensional stability test cycle
GM/Opel GMW 14124 - Test cycle G - Environmental corrosion cycle Automotive Environmental Cycles; Test cycle G: Environmental corrosion cycle
GM/Opel GMW 14124 - Test cycle D - Interior humidity thermal cycle Automotive Environmental Cycles; Test cycle D: Interior humidity thermal cycle
GM/Opel GMW 14124 - Test cycle C - Exterior humidity thermal cycle Automotive Environmental Cycles; Test cycle C: Exterior humidity thermal cycle
GM/Opel GMW 14124 - Test cycle A - Moisture and cold cycle Automotive Environmental Cycles; Test cycle A: Moisture and cold cycle
GM/Opel GMW 14108 - Resistance to cracking from bending at cold temperature Resistance of materials to cracking from bending at cold temperature
GM/Opel GMW 14102 - Determination of Water Spotting Determination of water spotting test
GM/Opel GMW 14093-C - Impact resistance (Steelball, after ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), ageing acc. to special requirements
GM/Opel GMW 14093-3-C - Impact resistance (Steelball, after 4 h storage at -30°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 3: after 4 h storage at -30°C and test immediately after removal
GM/Opel GMW 14093-2-C - Impact resistance (Steelball, test at 23°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 2: test at 23°C
GM/Opel GMW 14093-1-C - Impact resistance (Steelball, after accelerated ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 1: after accelerated ageing and cooling to 23°C
GM/Opel GMW 14069-B - Migration - Contact stain compatibility Migration - Bleeding resistance and contact stain compatibility of PVC with other materials; Method B: Contact stain compatibility
GM/Opel GMW 14069-A - Migration - Bleeding resistance Migration - Bleeding resistance and contact stain compatibility of PVC with other materials; Method A: Bleeding resistance
GM/Opel GMW 17023: PVC Skin, high heat stabilized, UV stabilized, manufactured in Slush-Method PVC skin, manufactured in slush-method, high heat and UV stabilized, with no fabric backing, but may include a foam back-layer.
GM/Opel GMN 10033 - Sunscreen lotion resistance Sunscreen lotion resistance of interior coatings
GM/Opel GMI 60333 - Residue on Ignition Test method for determining the residue on ignition (ash) of polymeric materials
GM/Opel GMI 60314 - Weight per unit area Test procedure for determining the weight per unit area of the backing of PVC-coated upholstery materials
GM/Opel GMI 60307 - Determination of the temperature stability Test method for determining the temperature stability of automotive trim materials
GM/Opel GMI 60306 - Determining the Low Temperature Resistance Test method for determining the low temperature resistance of automotive trim materials
GM/Opel GMI 60283-8 - Determination of compression load deflection (40 % compression) Procedures of test for cellular and related materials - Part 8: Determination of compression load deflection (40 % compression)
GM/Opel GMI 60283-5 - Humidity ageing (steam autoclave) Procedures of test for cellular and related materials - Part 5: Determination of resistance to humidity ageing
GM/Opel GMI 60283-4 - Determination of compression set Procedures of test for cellular and related materials - Part 4: Determination of compression set
GM/Opel GMI 60283-2 - Tensile properties Procedures of test for cellular and related materials - Part 2: Determination of tensile stress-strain properties
GM/Opel GMI 60283-1 - Determination of apparent density Procedures of test for cellular and related materials - Part 1: Determination of apparent density
GM/Opel GMI 60275 - Resistance to synthetic perspiration solution Determination of Resistance to Synthetic Perspiration Solution of Automotive Trim Components
GM/Opel GMI 60272 - Compatibility of PVC-materials with Amine Compatibility of PVC-interior trim materials with amines
GM/Opel GMI 60267-3-C - Impact resistance (Steelball, after 4 h storage at -30°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 3: after 4 h storage at -30°C and test immediately after removal
GM/Opel GMI 60267-2-C - Impact resistance (Steelball, test at 23°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 2: test at 23°C
GM/Opel GMI 60267-1-C - Impact resistance (Steelball, after accelerated ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 1: after accelerated ageing and cooling to 23°C
GM/Opel GMI 60266 - Resistance to cleaning agents Determination of resistance to cleaning agents of automotive trim components
GM/Opel GMI 60254 (without rework) - Compatibility of different materials Determination of compatibility of different materials in contact
GM/Opel GMI 60246-A - Determination of the compressibility of a cellular elastomer under a specified force Determination of the compressibility of a cellular elastomer under a specified force; Pressure foot type: A
GM/Opel GME 8701 - Evaluation of frictional properties Evaluation of frictional properties of body equipment materials
GM/Opel GME 6867 - Accelerated ageing Accelerated ageing test for polymer safety parts
GM/Opel GME 60403 - Resistance to colour change by fuel oil soot Resistance of organic coatings to colour change by fuel oil soot
GM/Opel GME 60402 - Scratch resistance (Erichsen hardness tester, model 318) Determining the scratch resistance of organic coating (Erichsen hardness tester, model 318)
GM/Opel GME 60401 - Cross hatch test Cross hatch test of organic coatings
GM/Opel GME 60368 - Abrasion resistance Determination of abrasion resistance of artificial leather
GM/Opel GME 60351 - Determination of moisture content, water absorption and thickness swell Test Method for determining moisture content, water absorption and thickness swell of fibreboards, chipboards, cardboard etc.
GM/Opel GME 60349 - Determination of cohesive strength Test method foe determining the cohesive strength of felts and similar materials
GM/Opel GME 60345 - Resistance to wear - rotary abrasion test (Schopper) Test method for the determination of the resistance to wear of automotive trim materials (Rotary abrasion test - Schopper)
GM/Opel GME 60344 - Determination of the surface resistance Test method for evaluating the electrostatic properties of upholstery materials by surface resistance measurements
GM/Opel GME 60341 - Seam strength Test method for determining the seam strength of upholstery trim materials
GM/Opel GME 60335 - Laminate adhesive strength Test method for determining the laminate adhesive strength of leathercloths and other laminated trim materials
GM/Opel GME 60334 - Tear strength Test method for determining the tear strength of textiles and coated fabrics (single tear method)
GM/Opel GME 60331 - Pilling resistance Test method for determining "pilling" resistance of upholstery materials
GM/Opel GME 60330 - Colour fastness to rubbing Test method for determining colour fastness to rubbing of textiles and coated fabrics
GM/Opel GME 60329 - Determination of the resistance to thread tear-out Test method for determining the resistance to thread tear-out of trim materials
GM/Opel GME 60325 - Tensile properties Test method for determining tensile properties of body trim, sealing materials, deadeners etc.
GM/Opel GME 60323 - Determination of weave density Determination of weave density of knitted fabrics
GM/Opel GME 60321 - Determining the proportions of vegetable fibres an rubbers Test method for determining the proportions of vegetable fibers and rubber upholstery materials
GM/Opel GME 60318 - Peel resistance Test method for determining the resistance to peel of self-adhesive tapes and films
GM/Opel GME 60317 - Determination of thread count and thread density Determination of thread count and thread density of woven fabrics
GM/Opel GME 60315 - Peel resistance Determination of the resistance to peeling of adhered body trim materials
GM/Opel GME 60305 - Stretch and permanent set characteristics Test method for determining the stretch and permanent set characteristics of textiles and leathercloths
GM/Opel GME 60304 - Resistance to Spotting Test method for determining resistance to "Spotting" of trim materials by water and saline solution
GM/Opel GME 60303-2 - Thickness Test method for determining thickness of trim materials; Coding 2: Force gauge equipment
GM/Opel GME 60303-1 - Thickness Test method for determining thickness of trim materials; Coding 1: Calliper equipment
GM/Opel GME 60302 - Determining "softness" of trim materials Test method for determining "softness" of trim materials
GM/Opel GME 60301 - Weight per unit area Test method for determining weight per unit area
GM/Opel GME 60292-2 (BST 100°C) - Colour Fastness and Resistance to Artificial Light Determination of colour fastness and resistance to artificial light; Coding 2: 100°C
GM/Opel GME 60292-1 (BST 115°C) - Colour Fastness and Resistance to Artificial Light Determination of colour fastness and resistance to artificial light; Coding 1: 115°C
GM/Opel GME 60288 - Martindale abrasion test Abrasion test for textile fabrics - Martindale abrasion test
GM/Opel GME 60286 - Determining the air permeability Test method for determining the air permeability of trim materials
GM/Opel GME 60276 - Odour Test method for determining the resistance to odour propagation of trim materials
GM/Opel GME 60271 - Determination of the release of formaldehyde Determination of the release of formaldehyde from moulded parts for the vehicle interior
GM/Opel GME 60268 - Stone impact resistance Determination of resistance to stone impact of surface coatings, plastics and self adhesive films
GM/Opel GME 60259 - Cold resistance Cold resistance of elastomers
GM/Opel GME 60258 - Accelerated ageing test Accelerated ageing test for elastomers
GM/Opel GME 60255 - Resistance to liquids and greases Resistance of elastomers to liquids and greases
GM/Opel GME 60253 - Resistance to fuels The resistance of elastomers to fuels
GM/Opel GME 60251 - Ozone resistance Determination of the ozone resistance of elastomers
GM/Opel GME 60248 - Scraping Scraping of Coatings on Elastomers and Textile Interior Materials
GM/Opel GME 14074 - Sunscreen and insect repellent resistance Sunscreen and insect repellent resistance
GM/Opel GME 00211: Performance Requirements for Applied Paint Finish on Plastic Parts and Components for Interior Use Applied Paint Finish on Plastic Parts and Components
GM/Opel GME 00004: General Requirements for Integrally Coloured Plastic Components for Interior Use plastic components used for interior applications on automobiles, where colouring of the components is achieved by through pigmentation of the plastic itself.
GM/Opel GME 00002: General Requirements for Coloured Plastic Components for Exterior Use Coloured Plastic Components for Exterior Use
GM/Opel GM 9635P - Dust-Out Dust-out from Fiber sound absorber pad
GM/Opel GM 9517P - Resistance to synthetic perspiration Resistance to synthetic perspiration
GM/Opel GM 9509P - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates
GM/Opel GM 9507P - Thumbnail hardness test (scratch test) Thumbnail hardness test for painted parts
GM/Opel GM 9505 P - Test Zyklus M - Dimensional stability cycle Automotive Environmental Cycles; Test cycle M - Dimensional stability cycle
GM/Opel GM 9305P (Fogging F) - Determination of the fogging characteristics (Fogging F) Determination of Fogging Characteristics of Automotive Interior Trim Materials
GM/Opel GM 9146P - Wicking Wicking of convertible top and roof trim materials
GM/Opel GM 9126P-B - Cleanability Test for Cleanability of Textiles and Plastics (Procedure B)
GM/Opel GM 9126P-A - Cleanability Test for Cleanability of Textiles and Plastics (Procedure A)
GM/Opel GM 9070P - Flammability Procedure for testing flammability of materials
GM/Opel GM 4486P - Ozone resistance Test for Ozone Resistance of Elastomer Compounds
GM/Opel - GMW 14122: Material Specification Plastic Roll Goods
GM/Opel - GMW 14122 - Material Spezification Textiles - Plastic Roll Goods, PRG
GM TM 912200: Fiberplastboard on the basis of wood pulp, bonded with synthetic resin low shaped parts, e.g. side panel trims, door trims, etc.
GM Daewoo EDS-T-7603 - Odor test Test Method for odor of interior materials
GM Daewoo EDS-T-7602 - Burning behaviour Test method for flammability of interior materials
GM Daewoo DS-T-7415 - Lightfastness Test Method for Determining color fastness to artificial light
GM 9515 P (based on ASTM D4060) - Abrasion resistance by the Taber Abraser Method Abrasion resistance of organic coatings (Taber Abraser Method); Modification of ASTM D4060
GM 4465P - Water Fog Resistance Water Fog Humidity Test
GC-MSD Determination (liquid injection) GC-MSD liquid injection
GC-MSD - Gas chromatography with mass selective detection GC-MSD
GC-FID/MSD GC-FID/MSD
GC-FID GC-FID
GC-ECD GC-ECD
GC Gas chromatography
Gas chromatography with mass-detection Gas chromatography with mass-detection
Gap measurement (DIN 1319) Fundamentals of metrology (several parts); Gap measurement
Fuhrmann test - Copper sulfate test, potentiostatic Metallic coatings - Electroplated coatings of nickel plus chromium and copper plus nickel plus chromium on plastics materials - Annex C3: Fuhrmann test (crack density, pore density)
Freightliner DaimlerChrysler 49-00039 § 4.7 - Cyclic corrosion test with CASS salt spray test Cyclic corrosion test with CASS test acc. to ASTM B368
Freightliner (DaimlerChrysler) 49-00039: Plate - chromium, decorative, plastics electroplated coatings of copper, nickel and chromium applied to plateable plastic substrates
Forming pressure/Press capacity (acc. customers requirement) Forming pressure / Press capacity (acc. customers requirement)
Ford: WSS-M99P32-A - Performance, Acoustical and Thermal Assemblies This specification defines the minimum durability requirements of all thermal, foam gasket and sound absorption applications, where various materials are combined to provide an assembly having thermal and/or acoustical (sound absorption/barrier) and/or fu
Ford: Engineering Material Specification - WSS-M8P18-B1/ B2/ B3/ B4 - parts Interior trim fabrics for covering automotive seat cushions, seat backs and trim panels
Ford: Engineering Material Specification - WSS-M8P18-A1/ A2/ A3/ A4 - Teile Interior trim fabrics for covering automotive seat cushions, seat backs and trim panels
Ford: Engineering Material Specification - WSS-M8P18-A1/ A2/ A3/ A4 - Parts Interior trim fabrics for covering automotive seat cushions, seat backs and trim panels
Ford WSS-M9P8-C: Elastomeric parts, interior performance For elastomeric parts in the passenger compartment.
Ford WSS-M9P11-A / A2: Material specification - Throw in mat assemblies, Cargo/Trunk mats For all weather floor mats to protect the floor carpeting and cargo mats for trunk and load floor coverings.
Ford WSS-M9P10-B § 3.6.2 - Environmental cycling test Glass run weather-strip, belt line (inner/outer) weather-strips, sun roof seals, and static fixed glass weather-strip performance specification § 3.6.2 Environmental cycling test
Ford WSS-M99P43-D: Performance, Genuine Leather Interior trim and seating leather, chrome or chrome free tanned leather
Ford WSS-M99P32-E6: Performance, Acoustical and Thermal Components and Assemblies for Engine, Underhood and Tunnel Applications insulators present in engine side dash, engine compartment foam gasket, tunel, underhood and sound absorption/insulation applications, where various materials are combined to provide assemblies having thermal, acoustical (sound absorption/barrier/insulati
Ford WSS-M99P32-E2/E3/E4/E5: Performance, Acoustical Wheel Arch/Well Liners, Heavy Duty Wheel Arch/Well Liners, Underbody/Engine Shields, Heavy Duty Underbody/Engine Shields Composite acoustical underbody and underbody/engine shields, including wheel arch/well liners, where various materials may be combined to provide acoustical (sound absorbtion/ barrier/ insulation) features; Light Weight Reinforced Thermoplastics (LWRT): P
Ford WSS-M99P32-E1: Performance, acoustical and insulators, interior assemblies all interior, luggage compartment and climate control sound absorption/insulation applications, where various materials are combined to provide an assembly having acoustical sound absorption/barrier/insulation and/or functional features
Ford WSS-M99P32-D6: Performance, Acoustical and Thermal Components and Assemblies for Engine, Underhood and Tunnel Applications insulators present in engine side dash, engine compartment foam gasket, tunel, underhood and sound absorption/insulation applications, where various materials are combined to provide assemblies having thermal, acoustical (sound absorption/barrier/insulati
Ford WSS-M99P32-D1 - Performance, Acoustical and Insulators, Interior Assemblies all interior and luggage compartment sound absorption/insulation applications, where various materials are combined to provide an assembly having acoustical sound absorption/barrier/insulation and/or functional features
Ford WSS-M99P32-C: Performance , Acoustical and thermal assemblies interior, luggage compartment, engine compartment and underbody thermal and/or sound absorbing insulators
Ford WSS-M99P32-B § 3.7 - Moisture Absorption Performance, acoustical and thermal assemblies; § 3.7: Moisture Absorption
Ford WSS-M99P32-A: Performance, Acoustical and Thermal Assemblies For luggage compartment, engine compartment and underbody thermal and/or sound absorbing insulators.
Ford WSS-M99P2222 - F1/F2: Performance, Vehicle Interior Environment Quality - F1: Material Requirements; - F2: Material Allergy and Direct Skin Contact Requirements For all products supplied to Ford and assembled into the cabin space and/or air conditioning system. Allergen requirements for all materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - D1: Performance, Vehicle Interior Environment Quality Component And Allergen Requirements For all products supplied to Ford and assembled into the cabin space and/or air conditioning system. Allergen requirements for all materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - C2 Performance, Vehicle Interior Environment Quality - Allergy testing and direct skin contact requirements All materials which have a foreseeable direct skin contact longer than 30 seconds.
Ford WSS-M99P2222 - C1 Performance, Vehicle Interior Environment Quality - Component requirements For all products supplied to Ford and assembled into the cabin space and/or air conditioning system.
Ford WSS-M98P8-B1: interior plastic parts with sprayed flocking glove box inners
Ford WSS-M98P13-E: Exterior Plastic Performance, Mold-In-Color Exterior mold-in-color plastic components
Ford WSS-M98D39: Laminate, Thermoplastic Olefin (TPO) Skin, Cross-Linked Polyolefin Foam - A: Door Panel and Interior Trim Applications, -A2: Instrument Panel Application door panel and interior trim (A), instrument panel (A2)
Ford WSS-M8P3: Performance, Flexible polymeric film, Interior quality For interior trim coverings for seats, door panels, headlining and other applications.
Ford WSS-M8P3-E1/-E2/-E3: Performance, Flexible Polymeric Film, Interior Quality For materials used as interior trim coverings for seats, door panels, headlining and other applications.
Ford WSS-M8P16-B: Performance, Carpet, Floor and Trim For automotive quality carpet assemblies, for floor, door trim, seat backs in exposed load compartment applications and exposed load floors whether molded or otherwise fabricated.
Ford WSS-M8P16-B: Performance, Carpet, Floor and Trim For automotive quality carpet assemblies, for floor, door trim, seat backs in exposed load compartment applications and exposed load floors whether molded or otherwise fabricated.
Ford WSS-M4P13-A: Anodized Aluminum Performance, Decorative Exterior Trim Anodized aluminum for bright decorative trim components
Ford WSS-M4D924-B1: Polycarbonate/Acrylonitrile Butadiene Styrene Belnd (PC+ABS) Medium Impact Molding Compound, Interior Thermoplastic UV stabilized, medium impact molding compound based on a blend of PC and ABS for mold-in-color interior applications
Ford WSS-M4D690-B1: Acrylonitrile Butadiene Styrene (ABS), Molding Compound, High Heat Resistant, Interior
Ford WSS-M4D665-B2 - Polyamide (PA) 6, 15% Glass fiber reinforced molded in color, interior
Ford WSS-M4D638-D2: Polypropylene (PP) copoymer molding compound, mold-in-colour, low gloss, UV stabilized, high impact at cold For material used for interior door trim applications with airbags requiring excellent cold impact performance.
Ford WSS-M4D585-C1: Polycarbonate/Acrylonitrile butadiene styrene blend (PC + ABS) high impact molding compound; - C2: polycarbonate/Acrylonitrile butadiene styrene blend (PC + ABS) molding compound For high impact thermoplastic molding compound based on a blend of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) for non-visible or painted applications.
Ford WSS-M4D550-A12: Thermoplastic Polyolefin Elastomer (TPO), 20 % Talc Filled, Medium High Impact, Molded In Color, Interior
Ford WSS-M2P191-A1: Coating performance, decorative finish, bright metal parts, interior For partially or fully coated interior parts made from chromium plated die castings, chromium plated steel or plastic, chromium flashed stainless steel, anodized aluminum and stainless steel.
Ford WSS-M2P190-A: Paint Performance, Interior Parts Metal Substrates Performance requirements for decorative coatings or finishes including paint, autophoretic, electrodeposition coating and powder coating on metal and metal plated substrates for interior use. Performance requirements for various interior applications such
Ford WSS-M2P190-A: Paint Performance, Interior Parts Metal Substrates Decorative coatings or finishes including paint, autophoretic, electrodeposition coating and powder coating on metal and metal plated substrates for interior applications such as seat tracks, towel bars, speaker grilles, brake pedals, and shift controls.
Ford WSS-M2P188-B1: Paint performance, plastic substrates, interior Decorative coatings including paint, soft coating paint and interior scratch resistant coatings on plastic substrates for interior use
Ford WSS-M2P188-A1: Paint performance, plastic substrates, interior Decorative coatings including paint, soft coating paint and pad printing on plastic substrates for interior use
Ford WSS-M2P181-C: Paint performance, flexible sustrates, exteriour This specification was released to define paint performance of exterior surfaces. It is specified for
Ford WSS-M2P181-C: Paint Performance, Flexible Substrates, Exterior For exterior painted surfaces eg vehicle bumpers, claddings, bodyside moldings, and other parts visible after assembly.
Ford WSS-M2P180-D: Paint performance, rigid substrates, exterior This specification was released to define paint performance of exterior parts visible after assemly and is applicable to all surfaces outboard of the weatherstrip. This specification is not intended for paint over chrome applications.
Ford WSS-M2P180-D: Paint performance, rigid substrates, exterior This specification was released to define paint performance of exterior parts visible after assemly and is applicable to all surfaces outboard of the weatherstrip. This specification is not intended for paint over chrome applications.
Ford WSS-M2P180-C: Paint performance, rigid substrates, exterior This specification was released to define paint performance of exterior parts visible after assembly and is applicable to all surfaces outboard of the weatherstrip.
Ford WSS-M2P164-B: Paint performance, primed plastic parts, intermediate storage This specification defines performance requirements for primed plastic parts that are stored or shipped
Ford WSS-M2P158-A1: Printed graphics performance, plastic and painted substrates, Interior For printed graphic coatings printed directly on resins or other surfaces. It includes printed symbols and inks which have been painted over then subsequently laser etched to become visible. (Not applicable to continuous surface covered coatings.)
Ford WSS-M2F173-B1/-B2: Vinyl Film, (PVC), Unsupported (-B1)/ Bia-axial Orientation Type (-B2) Unsupported polymeric film used in soft interior components taht require a flexible (soft) cover skin material
Ford WSS-M2D510-A4/A9: Thermoplastic Elastomer, Olefinics (TEO), EPDM Modified Interior Applications Thermoplastic elastomer olefinics EPDM modifie with < 95 Shore A hardness, for visible automotive interior passenger and storage compartments applications
Ford WSS-M2D507: Thermoplastic elastomer (TES), styrene block copolymer
Ford WSS-M2D504: Thermoplastic elastomer, styrene polyolefin block copolymer (TES)
Ford WSS-M1F21-D1: Split grain leather, genuine, finished, steering wheel, shift knob and boot
Ford WSS-M16J9-B: Paint, Basecoat/ Clearcoat over rigid substrates, Exterior
Ford WSS-M15P52-A: Performance, Instrument Cluster Assembly
Ford WSS-M15P50-C1/-C2: Performance, Plastic Components, C1 - Engine preconditioning, C2 - Underbody, Underhood, Engine Engine compartment and underbody plastic components
Ford WSS-M15P50-C1/-C2: Performance, Plastic Components, C1 - Engine preconditioning, C2 - Underbody, Underhood, Engine Engine compartment and underbody plastic components
Ford WSS-M15P49-A1: Performance, Floor Mat Logos Floor mat logos fixed to carpeted floor mat substrates
Ford WSS-M15P48-A: Seat plastic component / assembly performance specification Durability and performance requirements of all visible and non visible plastic seat components where various materials are combined to provide a trim assembly having decorative and/or functional features
Ford WSS-M15P45-C: Assembly Performance, Instrument Panel and Soft Interior Components, Flexible Cover Skin Material Instrument panel assembly, instrument panel component, floor console armrest, valence panel, steering wheel airbag cover, hush panel, door panel or wrapped pillar, which utilizes a flexible (soft) cover skin material over a hard substarte with or without
Ford WSS-M15P45-C: Assembly Performance, Instrument Panel and Soft Interior Components, Flexible Cover Skin Material Instrument panel assembly, instrument panel component, floor console armrest, valence panel, steering wheel airbag cover, hush panel, door panel or wrapped pillar, which utilizes a flexible (soft) cover skin material over a hard substarte with or without
Ford WSS-M15P45-B: Performance, Instrument panel and soft interior components, Flexible cover skin material For instrument panel assembly, instrument panel component, floor console armrest, valence panel, hush panel, door panel or wrapped pillar, which utilizes a flexible (soft) cover skin material over a hard substrate with or without foam or spacer fabric, an
Ford WSS-M15P45-A: Performance, Instrument panel assembly, Flexible cover skin material For instrument panel assembly which utilizes a flexible cover skin material. Also for Tu-tone cover skin.
Ford WSS-M15P44-B: Performance, Throw In Mat Assemblies, Carpeted carpeted throw-in mat which consists of carpet and substrate material
Ford WSS-M15P44-B: Performance, Throw In Mat Assemblies, Carpeted carpeted throw-in mat which consists of carpet and substrate material
Ford WSS-M15P44-A: Throw in mat assemblies, carpeted
Ford WSS-M15P4-H: Assembly Performance, Hard Mold-in-Color Interior Components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding
Ford WSS-M15P4-H: Assembly performance, Hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-G: Assembly Performance, Hard Mold-in-color Interior Components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding
Ford WSS-M15P4-F: Assembly performance, Hard Mold-In-Color, Interior Components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-F: Assembly performance, hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-F: Assembly performance, hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-F: Assembly performance, hard mold-in-color interior components For plastic mold-in-color and non-visible interior trim items such as door panels, center and overhead consoles, quarter panels, A-, B-, C-, and D-pillar moldings, hard instrument panels, instrument panel components and garnish molding.
Ford WSS-M15P4-E: Interior Trim, assembly performance specification For interior trim panels and moldings where various materilas are combined to provide a trim assemby decorative and/or functional features. For interior trim items such as door panel, center and overhead console, quarter panel, seat-back panel, A-, B-,C-,
Ford WSS-M15P34-E: Performance, Interior Trim Components With Appliques equirements for interior decorative trim components with multilayer construction. For components used on instrument panels and interior door trim panels. Including constructions of Wood, Film, Hydrographics and Aluminium
Ford WSS-M15P34-E: Performance, Interior Trim Components With Appliques
Ford WSS-M15P34-Draft: Performance, Interior Trim Components With Appliques Requirements for interior decorative trim components with multilayer construction. For components used on instrument panels and interior door trim panels. Including constructions of Wood, Film, Hydrographics and Aluminium
Ford WSS-M15P34-D: Performance, Interior Trim Components With Appliques Requirements for interior decorative trim components with multilayer construction. For components used on instrument panels and interior door trim panels. Including constructions of Wood, Film, Hydrographics and Aluminium
Ford WSS-M15P32-D: Trim assembly, enclosed luggage compartment covering Carpeted luggage or load compartment trim components where various materials are combined to provide a trim assembly having decorative and/or functional features
Ford WSS-M15P27-F: Material Specification - Headlining formed Headlining formed
Ford WSS-M15P26-D: Performance, Armrest, Foam in Place Foam-in-place molded armrest assembly
Ford WSS-M15P20-B1/B2: Polymeric foam for seating application For material used in all seat cushions and backs, armrests, head restraints, armrests, and other foam trim items related to seating construction.
Ford WSS-M15P20-B1/B2: Polymeric foam for seat applications For material used in all seat cushions and backs, armrests, head restraints, armrests, and other foam trim items related to seating construction.
Ford WSS-M15J15-A1/A2: Paint, Two component color coat for plastic, Interior, Soft touch for airbags
Ford WSS-M15J14: Paint, two component color coat for plastic, interior e.g. switches, buttons, console
Ford WSS-M15J14-A1/A2: Paint, two component color coat for plastic, interior, hard coat e.g. bezels, switches, buttons, console
Ford WSS M99P48-A1/-A2/-A3: Foam Performance (Interior, Exterior, Underhood) / Sewn in or Laminierung (Interior) / Pressure Sensitive Adhesive (Interior, Exterior, Climate Control and Underhood) Foams and foam tapes made of various materials including polyurethane, polypropylene foam and pressure sensitive adhesive tapes
Ford WSS M99P48-A1/-A2/-A3/-A4: Foam Performance (Int., Ext., Underhood) / Sewn in or Lamination (Int.) / PSA Tape (Int., Ext., Clim. Control, Underhood) / PSA Tape (High Temp. Applic., Underhood) Foams and foam tapes made of various materials including polyurethane, polypropylene foam and pressure sensitive adhesive tapes
Ford WSS M99P41-A10 bis -A72: Label Performance all labels found in vehicles
Ford WSS M99P41-A10 bis -A72: Label Performance all vehicle labels
Ford WSS M99P41-A10 bis -A72: Label Performance for all Ford Motor Company vehicle labels
Ford WSS M99P29-B: Performance, Energy Absorbing Foam, Interior foam materials used in energy absorbing bolsters and other interior trim components
Ford WSS M99P2222-C1 § 4.2 - Determination of formaldehyde / acraldehyde and acetaldehyde Performance, vehicle interior environment quality - C1: Component requirements; § 4.2: Formaldehyde / Acraldehyde and acetaldehyde after extraction according FLTM BZ 156-01by HPLC
Ford WSS M8P27-A1: Performance, Roof systems Fabric, Inrerior For flexible (soft) cover fabric, or laminate, to be bonded to an interior roof system substrate base or interior part above the beltÀline. This includes applications such as headliner, pillar, sun visor, roller shade, and moon/sun roof.
Ford WSS M4D985-A3: Flexible coverstock, slush moldable polyvinyl chloride (PVC) or polyvinyl chloride alloy, seamless instrument panel
Ford WSK-M98P5-A: Finished parts, plastics, interior Finished interior plastic parts consisting of various components and/or materials. These parts are generally used in the passenger compartment for application such as e.g. instrument panel coverings, glove box lids, pillar coverings etc.
Ford WSK-M4D819 - Polyethylene (PE) foam, physically cfosslinked, closed cell
Ford WSK-M4D665-A2: Polyamide (PA) 6, 15 % Glass Fiber Reinforced Molding Compound, Interior
Ford WSK-M4D649-A: Polyethylene (PE) Foam, Chemically Crosslinked, Closed Cell, 30 kg/m_ Closed cell, chemically crosslinked polyethylene foam with a nominal density of 30 kg/m_
Ford WSK-M4D648-A2: Polyamide (PA) 66, Heat stabilized molding compound, interior
Ford WSK-M4D635-A2 - Acetal (POM) Copolymer, Melt flow rate 7 - 15 thermoplastic acetal copolymer based on trioxane with melt flow rates from 7 to 15 g/ 10 min for functional automotive applications
Ford WSK-M3G178-B1/B4: Tape, Decorative, Pressure Sensitive, Exterior Decorative tapes used for exterior applications, transparent or pigmented, which may be printed on the face side and may be covered with a durable clear protective coating and backed with a pressure sensitive adhesive which is protected by a release paper
Ford WSK-M2D419-A: Cellular Elastomer, Gasket Cellular elastomeric gasket based on natural or synthetic rubber
Ford WSK-M2D419-A § 3.4.9 / PMMA (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (PMMA) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.9 / PC (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (PC) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.9 / ABS (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (ABS) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.5 - Cold flexibility Cellular Elastomer, Gasket; § 3.4.5: Cold flexibility
Ford WSK M2D416: Polyurethane (PUR) foam, molded high resilience
Ford WSB-M4D815-A - Polypropylene (PP) foam, closed cell Closed cell polypropylene foams produced by compression molding of expanded polypropylene beads (e.g. as fillers in low flex modulus bumper covers)
Ford SH-0089 / SH-0103 - Coefficient of friction Modiefied throw-in-mat slippage test (static friction)
Ford PA-0045 / DVM-0027-PA - Resistance to media Ford, Exterior topcoat solvent resistance / Exterior topcoat cure - solvent rub
Ford OR-0329 (DVM-0048-OR) - Sunload resistance Sunload resistance - exterior Ornamentation / leafscreen (IR-Test)
Ford MA-0018 / DVM-0014-MA - Odour test Odour for seat belts
Ford MA-0015 / DVM-0027-MA / FLTM BO 127-03 (based on) - Stress cracking test Chemical compatibility (Stress cracking test for plastics)
Ford IT-0815 (Ver. 10) / Ford DVM-0012-17 (Ver. 4) - Maximum Deflection & Rotation Interior Trim maximum Deflection & Rotation for Quality Feel
Ford IP-0105 / DVM-0038-IP - Sunload and heat age resistance Instrument panel - Sunload and heat age resistance (IR test: heat storage with infrared radiation)
Ford IP-0105 / DVM-0038-IP - Sunload and heat age resistance Instrument panel - Sunload and heat age resistance (IR test: heat storage with infrared radiation)
Ford FLTM BZ 157-01 (VDA 277) - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors by Headspace Gas Chromatography (TVOC)
Ford FLTM BZ 156-01-B (HPLC) - Determination of aldehyde and ketone emission Determination of formaldehyde, aldehyde and ketone emissions from non metallic components, parts and materials in the vehicle interiors; Part B: Determination of aldehyde and ketone emission by high performance liquid chromatography
Ford FLTM BZ 156-01-A (Photometry) - Determination of formaldehyde emission Determination of formaldehyde, aldehyde and ketone emissions from non metallic components, parts and materials in the vehicle interiors; Part A: Photometric determination of formaldehyde emission
Ford FLTM BZ 108-01 - Determination of volatile organic compounds 10L- Bag method test for measuring the emissions of volatile organic compounds from vehicle interior materials
Ford FLTM BU 101-06-B - Static Shear Test Static Shear Test of pressure sensitve tapes (Method B)
Ford FLTM BU 101-06-A - Dynamic Shear Test Dynamic Shear Test of pressure sensitve tapes (Method A)
Ford FLTM BQ 104-07, Procedure 9 - Climate cycle test Environmental Test Cycles, procedure 9
Ford FLTM BQ 104-07 - Climate cycle test Environmental Test Cycles (only procedures 1 to 6)
Ford FLTM BQ 007-02 - Acid dissolution test for aluminium parts Acid dissulotion test for decorative aluminium parts
Ford FLTM BP 101-01 - Degradation by ozone Rubber - Degradation by ozone
Ford FLTM BO 163-01 - Denting test (Impact test) Denting test for Interior Parts with Metal Appliques
Ford FLTM BO 162-01 - Scratch resistance Resistance to scratch and marring
Ford FLTM BO 160-04-A - Resistance to high pressure cleaning operations Resistance of painted plastic parts to high pressure cleaning operations
Ford FLTM BO 151-01-B - Ball drop test (steel ball) Resistance to low temperature impact (Ball drop test); Method B: steel ball
Ford FLTM BO 151-01-A - Ball drop test (rubber ball) Resistance to low temperature impact (Ball drop test); Method A: rubber ball
Ford FLTM BO 131-03 - Interior odor test Interior odor test
Ford FLTM BO 131-03 (Variante 3) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Variante 2) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Variante 1) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Condition 4) - Odor Test Interior Odor test
Ford FLTM BO 131-03 (Condition 3) - Interior Odor test Interior odor test (Condition 3, 80 °C)
Ford FLTM BO 131-03 (Condition 3) - Interior Odor test Interior odor test (condition 3: 2 h at 65 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 1) - Interior Odor test Interior odor test (Condition 1, 23 °C)
Ford FLTM BO 131-01 - Odor test Determination and assessment of odor from interior trim materials / components / assemblies
Ford FLTM BO 127-03 - Stress cracking test Stress cracking test for plastics
Ford FLTM BO 127-03 - Stress cracking test Stress cracking test for plastics
Ford FLTM BO 116-01 - Light fastness Resistance to interior weathering (Exposure of interior trim materials in a controlled irradiance water cooled xenon-arc apparatus)
Ford FLTM BO 116-01 - Light fastness Resistance to interior weathering (Exposure of interior trim materials in a controlled irradiance water cooled xenon-arc apparatus)
Ford FLTM BO 113-03 - Load deflection test Load deflection test
Ford FLTM BO 111-02 - Test for indentation and recovery Test for indentation and recovery
Ford FLTM BO 101-05 - Fuel resistance Determination of fuel resistance of plastic parts
Ford FLTM BO 061-01 - Determination of tackiness Determination the tackiness of interior materials
Ford FLTM BO 040-01, Procedure B (without sun load) - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing without sun load (80 °C)
Ford FLTM BO 040-01, Procedure B (with sun load) - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing with sun load (100 °C or 90 °C)
Ford FLTM BO 040-01, Procedure B (with sun load) - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing with sun load (100 °C or 90 °C or 80 °C)
Ford FLTM BO 040-01, Procedure A - Short term environmental cycling (Heat, humidity and cold cycle) Änderung gegenüber Ausgabe 2016-07: zusätzliche Anforderung für Horizontale oder vertikale Teile auf oder oberhalb der Gurthöhe, speziell für Himmel und Dachkonsole 90 °C
Ford FLTM BO 040-01, Procedure A - Short term environmental cycling Short and long term environmental testing
Ford FLTM BN 162-01 - Permanent folding (Bally Flex Test) Bally Flex Test for automotive seat cover materials
Ford FLTM BN 158-01 - Martindale abrasion test Martindale abrasion testing of textile fabrics
Ford FLTM BN 156-01 - Electrical resistance test (surface resistance) Electrical resistance test for textiles (surface resistance)
Ford FLTM BN 155-01 - Resistance to simulated finger tip abrasion Resistance to simulated finger tip abrasion (Abrex)
Ford FLTM BN 153-1 - Liquid repellency test liquid repellency coating verification test
Ford FLTM BN 151-06 - Adhesion strenght (90°) Determination of 90° Adhason strength of interior materials to rigid or flexible substrates
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength of laminates
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength
Ford FLTM BN 151-01-C - Welded seam strength/ peeling force (after humidity exposure) Bond strength of trim assemblies - Method C (Peel bond strength after humidity exposure)
Ford FLTM BN 151-01-B - Welded seam strength/ peeling force (after aging) Bond strength of trim assemblies - Method B (Peel bond strength after aging)
Ford FLTM BN 151-01-A - Welded seam strength/ peeling force (original state) Bond strength of trim assemblies - Method A (Original peel bond strength)
Ford FLTM BN 121-01 - Bond strength test Bond strength test - Interior trim decorations
Ford FLTM BN 119-01 - Seam strength Determination of seam strength of textile trim materials
Ford FLTM BN 119-01 - Seam strenght Determination of seam strength of textile trim materials
Ford FLTM BN 117-03-B - Surface Fiber Deterioration Evaluation of trim materials after accelerated exposure in a controlled irradiance water cooled xenon arc apparatus; Method B: surface fiber deterioration
Ford FLTM BN 117-03-A - Tensile strength after ageing, retained Tensile Strength Evaluation of trim materials after accelerated exposure in a controlled irradiance water cooled xenon arc apparatus; Method A: Tensile strength after ageing, retained Tensile Strength (GT-Klemmen)
Ford FLTM BN 115-07 - Compression set Compression set of polyurethane foam
Ford FLTM BN 114-01 - Thickness measurement Thickness test for automotive textile materials
Ford FLTM BN 113-03 - Heat aging (constant tensile load) Extended heat ageing of polymeric coated fabrics (constant tensile load)
Ford FLTM BN 113-01 - Bond strength of trim assemblies Bond strength of trim assemblies
Ford FLTM BN 112-12-B - Resistance to staining Resistance to Staining of seating farbric; Method B
Ford FLTM BN 112-12-A - Resistance to staining Resistance to Staining of seating farbrics; Method A
Ford FLTM BN 112-12 Methode A - Resistance to staining Resistance to Staining of seating farbric; Method A
Ford FLTM BN 112-12 - Resistance to staining Resistance to Staining of seating farbrics
Ford FLTM BN 112-08 - Soiling and cleanability Soiling and cleanability test for interior trim materials
Ford FLTM BN 112-08 - Soiling and cleanability Soiling and cleanability test for interior trim materials
Ford FLTM BN 112-08 - Soiling and cleanability Soiling & Cleanability Test for Interior Trim Materials
Ford FLTM BN 112-08 - Soiling & cleanability test for interior trim materials. Soiling & cleanability test for interior trim materials.
Ford FLTM BN 112-03 - Degree of soil transfer Degree of soil transfer to leather and polymeric fabric«s
Ford FLTM BN 108-13 - Resistance to scratching Resistance to scratching
Ford FLTM BN 108-11 - Resistance to snagging (Mace test) Resistance to snagging - Mace test
Ford FLTM BN 108-07 - Resistance to snagging (Taber) Resistance to snagging of trim materials (Taber abraser)
Ford FLTM BN 108-07 - Resistance to snagging (Taber) Resistance to snagging of trim materials (Taber abraser)
Ford FLTM BN 108-04 - Resistance to scuffing Resistance to scuffing
Ford FLTM BN 108-03 - Resistance to pilling with Velcro tape Resistance to pilling with Velcro tape
Ford FLTM BN 108-03 - Resistance to pilling Resistance to pilling
Ford FLTM BN 108-02 - Resistance to abrasion - Taber abraser Resistance to Abrasion - Taber Abraser
Ford FLTM BN 108-02 - Resistance to abrasion - Taber abraser Resistance to Abrasion - Taber Abraser
Ford FLTM BN 108-01 - Resistance of textile fabrics to abrasion (Stoll Quartermaster - Universal Wear Tester) Resistance of textile fabrics to abrasion - inflated diaphragm method (Stoll Quartermaster - Universal Wear Tester)
Ford FLTM BN 107-01 - Crocking test Crocking Test
Ford FLTM BN 107-01 - Crocking test Crocking Test - instrumental evaluation
Ford FLTM BN 106-02 - Seam Fatigue Seam Fatigue Testing
Ford FLTM BN 106-02 - Seam Deterioration (Fatigue) Seam Fatigue Testing
Ford FLTM BN 106-01-B (contains Proc. A) - Determination of density Determination of weight per unit area and density of trim materials
Ford FLTM BN 106-01-A - Determination of the mass per unit area Determination of weight per unit area and density of trim materials (here: weight per unit area)
Ford FLTM BN 105-03 - Dimensional stability Dimensional stability of textile trim materials
Ford FLTM BN 105-01 - Shrinkage test Shrinkage test for textiles and artificial leathers
Ford FLTM BN 103-01 - Resistance to migration staining and blocking Resistance of coated fabrics and plastic film to migration staining and blocking
Ford FLTM BN 102-02 - Flexural test Flex test for polymeric coated fabrics, genuine leathers and woven fabrics
Ford FLTM BN 102-01-A - Low temperature flexibility Polymeric materials, low temperature flexibility
Ford FLTM BN 024-02 - Flammability Flammability test for automotive interior materials
Ford FLTM BI 168-01 - Fluid resistance Fluid resistance of chassis and exterior materials for incidential exposure
Ford FLTM BI 161-01 - Mar Resistance Mar resistance determination for automotive coatings
Ford FLTM BI 157-06 - Stone chip resistance High performance stone chip resistance test, new rating scale
Ford FLTM BI 123-03 - Component corrosion test Component corrosion test (salt spray test)
Ford FLTM BI 123-01 - Corrosion Test Painted sheet metal corrosion test - Laboratory-Simulated Arizona Proving Ground Test
Ford FLTM BI 113-08 - Resistance to sunscreen lotion and insect repellent Resistance to sunscreen lotion and insect repellent
Ford FLTM BI 113-08 - Resistance to sunscreen lotion and insect repellent Resistance to sunscreen lotion and insect repellent
Ford FLTM BI 113-07 - Resistance to synthetic perspiration staining Resistance to synthetic perspiration staining
Ford FLTM BI 113-06 - Resistance to perspiration Test method for resistance to perspiration
Ford FLTM BI 113-05 - Resistance to acid spotting Resistance to acid spotting of painted test panels or actual finished parts
Ford FLTM BI 113-03 - Resistance to synthetic perspiration staining Resistance to synthetic perspiration staining
Ford FLTM BI 113-02 - Resistance to acid spotting Resistance to acid spotting
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 110-01 - Gloss measurement Measurement of the gloss of paint panels
Ford FLTM BI 110-01 - Gloss measurement Measurement of the gloss of paint panels
Ford FLTM BI 109-03 - Color measurement Color difference evaluation of textile materials
Ford FLTM BI 109-01 - Visual appearance evaluation Visual appearance evaluation
Ford FLTM BI 109-01 - Color matching with artificial light Color matching with artificial light
Ford FLTM BI 106-03 - Hydrolysis resistance Hydrolysis resistance of painted plastic panels
Ford FLTM BI 106-01-E - Coating Adhesion test Methode E Adhesion of coatings (for coatings and finishes on steel, aluminum, galvanized steel, plastic or other substrates), Method E (adhesion test for parting lines, radius and edges)
Ford FLTM BI 106-01-D - Coating adhesion test, Paint adhesion test, Method D (Adhesion Test for Flexible Coatings) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method D (Adhesion Test for Flexible Coatings)
Ford FLTM BI 106-01-D - Coating adhesion test, Paint adhesion test , Method D (Scribe Test for Two-Component Urethane Coatings) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method D (Scribe Test for Two-Component Urethane Coatings)
Ford FLTM BI 106-01-D - Adhesion test Coating adhesion test, Method D (Adhesion Test for Flexible Coatings)
Ford FLTM BI 106-01-C - Coating adhesion test, Paint adhesion test , Method C (Parallel Scratch Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method C (Parallel Scratch Test)
Ford FLTM BI 106-01-B - Scribe test Coating adhesion test, Method B (Scribe Test)
Ford FLTM BI 106-01-B - Coating adhesion test, Paint adhesion test, Method B (Scribe Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method B (Scribe Test)
Ford FLTM BI 106-01-A - Coating adhesion test, Paint adhesion test, Method A (Scratch Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method A (Scratch Test)
Ford FLTM BI 104-02 - Condensing water vapor test Condensing water vapor test
Ford FLTM BI 104-01 - Water immersion test Water immersion test for painted parts and panel
Ford FLTM BI 103-01 - Salt spray resistance test Salt spray resistance test for painted panels and parts (gem. ASTM B 117)
Ford FLTM AN 101-01 (water) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water spotting) - Resistance to water spotting Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (perspiration) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford EU AN 1-1 (Water spotting) - Water spotting test Resistance of Textiles to Bleeding, Perspiration and Water Spotting
Ford ESB-M70J5-A: Paint, Powdered, Thermosetting Polyester Material requirements for thermosetting polyester powder coatings as applied to. For powder coatings used on automotive vent window and division bar assemblies as an alternate coating to that provided by ESB-M6J119 primer and ESB-M32J101 enamel combined.
Ford ES-D8VH-19A672-AA-§ IIIA - Resistance to fungal growth Biostatic effectiveness and biostatic concentration of materials used in an air conditioning assembly such as adhesives, foam, expanded rubber or other synthetic polymeric materials
Ford ES-2U5A-1A263-AA: Smooth Flexible Tubing Performance Specification Flexible, straight or smooth surface tubing used for Ford electrical distribution systems
Ford DVM-0055-MA - Abrex Abrasion Test Abrex Abrasion Test
Ford DVM-0053-ST - Manual Tip Slide Life Cycle Seat
Ford DVM-0039-MA - Insect repellent resistance Insect repellent resistance
Ford DVM-0036-MA - Sunscreen resistance test Sunscreen resistance test
Ford DVM-0033-SH - Cold temperature set test Cold temperature set test (Floor mat samples / carpet)
Ford DVM-0019-MA - Scratch Resistance Scrat Resistance
Ford DVM-0017-MA - Soiling and cleaning behavior Soiling and cleaning behavior of interior materials
Ford DVM-0007-MA-D - Coating adhesion, Methode D (Scribe Test) Coating adhesion test; Method D: Scribe Test
Ford Crease test Engineering Material Specification - Crease Test - WMD and AMD
Ford CETP-00.00-L-467 - Corrosion test Global Laboratory Accelerated Cyclic Corrosion Test
Footfall examination Footfall examination under temperature influence (eg, Daimler FuVo A 001 001 90 99 cover strip)
Foam adhesion, manual
FMVSS 302 / US 571.302 (TP 302-03) - Burning behaviour Flammability of interior materials
FMVSS 209 § 5.1.e - Resistance to light Federal Motor Vehicle Safety Standard - Seat belt assemblies; § 5.1.e - Resistance to light
Flock identification (qualitative pretest) Flock identification
Float wear (acc. to customer's requirement, Bosch company) - Abrasion behaviour Effect of mechanical stress (friction) on the fuel float of the level sensor
Flexural stress Flexural stress
Fingerprint test - Fingerprint removal Fingerprint removal on high gloss surfaces
Filter paper test Filter paper test
Film thickness (microscopy) Film thickness (microscopy)
Fiat/Chrysler LP-463KC-09-01 - Odor test Odor evaluation of interior trim materials
Fiat/Chrysler Group MS.90053: Coating Performance - Requirements for painted interior parts Coating Performance Requirements for painted Interior parts
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat/Chrysler Group CS-13398: Performance, Vehicle Interior Air Qualiy Material Requirements
Fiat PF.90045: Flocking on non-metallic materials for Automotive Interior Surfaces Glove Box inner, Glove Box bin
Fiat Chrysler PF.90045: Flocking on non-metallic materials for automotive interior surfaces
Fiat 9.57413: Copper-Nickel-Chromium - (Chromium-Plating) Coating of parts made of plastic material For copper-nickel-chromium coatings applied on thermoplastic material. Some examples of application are provided by masks for radiator grids, moldings, border, handles, instrument panels for dashboards, frames, headlamp bodies, etc.
Fiat 9.55842/01: Aestethic and operational finishing of parts made of plastic materials obtained by painting or other processes Aestethic and operational finishing of parts made of plastic materials obtained by painting or other processes
Fiat 9.55842/01: Aestethic and operational finishing of parts made of plastic materials obtained by painting or other processes
Fiat 9.55842-01 § 2.19 - Resistance to wear Aesthetic and operational finishing of parts made of plastic materials obtained by painting or other processes; § 2.19: Resistance to wear
Fiat 9.55253: Miscellaneous plastic components (thermopastic or thermosetting) For thermoplastic and thermosetting plastic components.
Fiat 9.55253 § 2.7.2 - Surfactant - Resistance to test medium Specification for miscellaneous plastic components; § 2.7.2: Surfactant - Resistance to test medium
Fiat 9.03176-01 § 2.11.6.2 - Chemical agents resistance (crock meter test AATCC 8) Safety belts (assembly); § 2.11.6.2: Resistance to chemical agents for the tape homologation label
Fiat 9.03162 § 2.12 - Wear Resistance Handgrip for gearbox lever (assembly); § 2.12: Wear resistance
Fiat 9.03160 § 2.17 - Rot resistance Preformed car headliners; § 2.17: Rot resistance
Fiat 9.03159: Door panels and rear side trim Door panels and rear side trim
Fiat 9.03141: Instrument panels Instrument panels
Fiat 9.03141/04: Consoles on the Tunnel Consoles on the Tunnel
Fiat 9.03138. Automotive Seat Head Restraints Seat Head Restraints
Fiat 9.03135: Cellular polyurethane padding for motor vehicle seat cushions and backs Conventional seat cushions and backs (spring), Seats with pan-type frame (springless)
Fiat 9.02110: Steering Wheels Steering Wheel
Fiat 7.M8300 § 1.6 - Compression set Cellular polyurethane padding for motor vehicle seta cushions and backs; § 1.6 Compression set
Fiat 7.M8300 § 1.4 - Indentation load deflection on specimens Cellular polyurethane padding for motor vehicle seat cushions and backs; § 1.4: Indentation load deflection on specimens
Fiat 7.G2091 - Determination of free Phenol-content Phenolic resin base materials - Free phenol content
Fiat 7-M8607 - Rotting evaluation Pre-formed textile material - Rotting evaluation
Fiat 7-M0005 - Resistance to scratching Molded plastic trim components - Resistance to scratching (followed by a colour measurement)
Fiat 7-M0003 - Evaluation of the embossing Evaluation of the embossing of plastic materials
Fiat 7-M0002 - Gloss measurement Evaluation the gloss of plastics
Fiat 7-M0001 - Colour measurement (CIELAB) Colour evaluation on aesthetic surfaces in plastic
Fiat 7-G2090-B - Determination of Formaldehyde content Vehicle interior components - Formaldehyde release test - Acetyl acetone method - material: Type B
Fiat 7-G2090-A - Determination of Formaldehyde content Vehicle interior components - Formaldehyde release test - Acetyl acetone method - materials: Type A
Fiat 7-G2000 - Burning behaviour Determining the resistance to combustion of the non-metallic materials for parts inside vehicle passenger compartment
Fiat 55232: Rigid Polyamide Plastics for Moulding and Extrusion
Fiat 50496 - Colour fastness in water Textiles: Colour fastness in water of automobile interior fabrics
Fiat 50471/01 - Alternating Ultraviolet Radiation / Humidity Resistance Test Alternating Ultraviolet Radiation / Humidity Resistance Test
Fiat 50470 - Water resistance test Water resistance test for decorations and paints
Fiat 50461 - Cross-cut test Adhesion test of inorganic and organic trims by squaring off
Fiat 50457 - Gloss measurement Tests for nonmetallic materials - Specular gloss determination for paints, varnishes and enamels by glossmeter
Fiat 50455/10 - Determination of fabric abrasion resistance by the Taber method Determination of fabric abrasion resistance by the Taber method
Fiat 50455-08 - Amine contamination resistance Amine contamination resistance
Fiat 50451/01 - Method B - Accelerated ageing in sunlight Accelerated ageing in sunlight; Method B: Xenotest
Fiat 50451/01 - Method A - Accelerated ageing in sunlight Accelerated ageing in sunlight; Method A: Fade-ometer
Fiat 50451 - Xenon arc lamps - Artifical weathering Accelerated weathering Test (Xenotest)
Fiat 50444 § 1.2 - Hot aging Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.2 Hot aging
Fiat 50444 § 1.1.2 (Crockmeter) - Color fastness to rubbing Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.1.2 Crock test, color fastness to rubbing
Fiat 50423 § 3.1 - Compression test Test for compression-deflection, compression/tension set and apparent density of expanded cellular materials
Fiat 50423 § 2 - Compression Deflection Test for compression-deflection, compression/tension set and apparent density of expanded cellular materials
Fiat 50184-D - Temperature cycling Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method D (Temperature cycling)
Fiat 50184-C - Low temperature test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method C (Low temperature test)
Fiat 50184-B - Damp heat test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method B (Damp heat test)
Fiat 50184-A - Dry heat test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method A (Dry heat test)
Fiat 50180 Method A3 - Copper-accelerated acetic acid salt spray test (CASS-Test) Corrosion tests - Method A3: Copper-accelerated acetic acid salt spray test (CASS-Test)
Fiat 50180 method A1 - salt spray test Corrosion tests - method A1: Salt spray test
Fastness to water spotting Genrell test method - Fastness to water spotting (e.g. BMW GS 93026-1)
Fastness to rubbing (crockmeter) Fastness to rubbing (crockmeter, abrasion)
External Processing External Processing
expansion of candidate substances SVHC ECHA 13 candidate substances SVHC ECHA from publication 2012-06-18
EvoBus, Soiling and Cleanability Part 2 + Part 3 - (with soiling fabric) Following DBL 5399 § 3.3 + 3.4: Textile (for normal load): Soiling and cleaning behavior, Daimler - Test methods for interior materials and simular products
EvoBus, Soiling and Cleanability - Part 3 - (with liquid test media) based on DBL 5399 § 3.3 + 3.4: Soiling and cleaning behavior, Daimler - Test methods for interior materials and simular products
EvoBus, Resistance to cleaning agents, part 1 based on DBL 5399 § 3.2: Soiling and cleaning behavior, Daimler - Test methods for interior materials and simular products
EvoBus EVO E-Leather (Draft) for E-Leather for busses
EvoBus EVO 130.67: Technical delivery conditions - Artificial leather For artificial leather for buses
EvoBus EVO 130.66: Technical delivery conditions - Leather for leather for buses
EvoBus EVO 130.65: Technical delivery conditions - Needle-Punched Nonwoven, Cover materials For Needle-Punched Nonwoven for buses
EvoBus EVO 130.62: Technical delivery conditions - Microfiber Textils For microfiber textiles for buses
EvoBus EVO 130.61: Technical delivery conditions - Fabrics, Cover Materials For seat covers for buses.
Evaluation of fiber deterioration after exposure to light Fiber deterioration after prior stress
Evaluation after outdoor weathering Evaluation after outdoor weathering
Equipment for Martindale device Equipment for Martindale device, according to DIN EN ISO 12947-1
Endurance test Endurance test
Electrostatic charge Electrostatic charge
ECE R118 Appendix 8 - Burn behaviour (vertical) Uniform technical prescriptions concerning the burning behavior of interior materials of certain categories of motor vehicles; Appendix 8: Test to determine the vertical burning rate of materials
ECE R118 Appendix 7 - Determination of melting behaviour Uniform technical prescriptions concerning the burning behavior of interior materials of certain categories of motor vehicles; Appendix 7: Test to determine the melting behavior of materials
ECE R118 Appendix 6 - Burning behaviour Uniform technical prescriptions concerning the burning behavior of interior materials of certain categories of motor vehicles; Appendix 6: Test to determine the horizontal burning rate of materials
E-DIN 55660-2 - Determination of the free surface energy of solid surfaces Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
Dynamic mechanical analysis (DMA)
Dubpernell method - Copper sulfate test, galvanostatic Dubpernell method (crack density, pore density)
Dry respectively wiping scratch resistance - Scratch resistance of coatings: Crockmeter test Scratch resistance of coatings in the dry state (wiping scratches)
Drop test Drop test
Drop test Drop test (dropping a component on the floor, e.g. Volvo TR 31825672 § 1.6.14)
Draw-off force/mount force (according customers requirememt) Draw-off force / mount force (acc. to drawing)
Domestic washing and drying procedures Textiles - Domestic washing and drying procedures for textile testing
DLE/Dräger-test tube; on-site - Dräger air extraction Dräger air extraction
Displacement force Displacement force (according customer requirements)
Displacement distance Displacement distance (according customer requirements)
Disassembling force Disassembling force (according customer requirements)
DIN V 53160-2 - Resistance to artificial sweat Determination of the colourfastness of articles in common use - Part 2: Resistance to artificial sweat
DIN V 53160-1 - Resistance to artificial saliva Determination of the colourfastness of articles in common use - Part 1: Resistance to artificial saliva
DIN ISO 9354 - Coding system of waves Textiles - Weaves - Coding system and examples
DIN ISO 815-2 - Determination of compression set Elastomers or thermoplastic elastomers- Determination of compression set - Part 2: At low temperatures
DIN ISO 815-2 - Determination of compression set Elastomers or thermoplastic elastomers- Determination of compression set - Part 2: At low temperatures
DIN ISO 815-1 - Determination of compression set Elastomers or thermoplastic elastomers - Determination of compression set - Part 1: At ambient or elevated temperatures
DIN ISO 815 - Determination of compression set Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
DIN ISO 7743-B - Compression stress-strain properties, Method B Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties; Method B: Standard test specimen with on test specimen bonded metal plates
DIN ISO 7743-A - Compression stress-strain properties, Method A Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties; Method A: Standard test specimen with lubricated metal plates
DIN ISO 7619-1 (Shore D) - Determination of Shore D hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
DIN ISO 7619-1 (Shore A) / testing in heat - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in heat
DIN ISO 7619-1 (Shore A) / testing in cold - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in cold
DIN ISO 7619-1 (Shore A) - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
DIN ISO 6133 Procedure B - Analysis of multipeak traces Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion
DIN ISO 48 - Determination of hardness Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Method H: Test at high hardness, Method L: Test at low hardness, Method M: Microhardnesstest but NOT method N: normal test
DIN ISO 48 - Determination of hardness Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Method H: Test at high hardness, Method L: Test at low hardness, Method M: Microhardness test but NOT method N: normal test
DIN ISO 4532 / ISO 4532 - Pistol test Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test
DIN ISO 3865-A1 - Contact and migration staining without irradiation Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material; Method A1: Contact and migration staining without irradiation
DIN ISO 3733 - Determination of water - Distillation method Petroleum products and bituminous materials - Determination of water - Distillation method
DIN ISO 3451-3-A - Ash content in unplasticized cellulose acetate Plastics - Determination of ash - Part 3: Unplasticized cellulose acetate (Method A: direct ash)
DIN ISO 3451-2 - Ash content Plastics - Determination of ash - Polyalkylene terephthalates
DIN ISO 3415 - Thickness loss Textile floor coverings - Determination of thickness loss after brief, moderate static loading
DIN ISO 34-1-B - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece)
DIN ISO 34-1-B - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece)
DIN ISO 34-1-B - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece)
DIN ISO 34-1-B - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Procedure B: Angle test specimens)
DIN ISO 34-1-A - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-A - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-A - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-A - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Procedure A: Trouser test specimens)
DIN ISO 2796 - Test for dimensional stability Cellular plastics, rigid - Test for dimensional stability
DIN ISO 2285 - Tension set under constant elongation Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep unter constant tensile load (here: constant elongation)
DIN ISO 2285 - Determination of tension set under constant elongation Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep unter constant tensile load (here: constant elongation)
DIN ISO 1887 - Determination of combustible matter content Textile glass - Determination of combustible matter content
DIN ISO 1817 - Effect of liquids Rubber, vulcanized - Determination of the effect of liquids
DIN ISO 1817 - Effect of liquids Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
DIN ISO 16000-6 / TDS-GC-MSD - Determination of volatile organic compounds (VOC) Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on TENAX TA¨ sorbent, thermal desorption and gas chromatography using MS/FID
DIN ISO 16000-3 / VDI 4300-3 - Indoor air sampling of carbonyl compounds Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method (Indoor air pollution measurment - general aspects of formaldehyde measurements strategy)
DIN ISO 16000-3 - Determination of formaldehyde and other carbonyl compounds Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method
DIN ISO 1431-1/ ISO 1431-1 (procedure B) - Ozone resistance Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
DIN ISO 12884/ VDI 4300-2 - Sampling for PAH Ambient air - Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/ mass spectrometric analysis (Sampling for PAH)
DIN ISO 12219-7 - Determination of the olfactory behavior Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements (The odor test is carried out in connection with the chamber emission test acc. to DIN ISO 12219
DIN ISO 12219-6 - Bestimmung organischer Emissionen Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method (Is carried out as an additional method in conn
DIN ISO 10694 - Determination of organic and total carbon Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
DIN IEC 60167/ VDE 0303-31 - Insulation resistance Test methods for electrical insulation materials - Insulation resistance of solid insulating materials
DIN IEC 60093 / VDE 0303-30 - volume resistivity and surface resistivity of solid electrical insulating materials Methods of test for insulating materials for electrical purposes - Volume resistivity and surface resistivity of solid electrical insulating materials
DIN EN ISO 9864 - Determination of mass per unit Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
DIN EN ISO 9863-1 - Determination of thickness Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
DIN EN ISO 9237 - Permeability of fabrics to air Textiles - Determination of the permeability of fabrics to air
DIN EN ISO 9227-NSS - Neutral salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Neutral salt spray test, NSS test)
DIN EN ISO 9227-CASS - Copper-accelerated salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Copper-accelerated salt spray test, CASS test)
DIN EN ISO 9227-AASS - Acetic acid salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Acetic acid salt spray test, AASS test)
DIN EN ISO 9142 - E2 - Cataplasm storage Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints - Cycle E2: Exposure to water with a moist compress
DIN EN ISO 9142 - D2 - Cyclic aging Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints - Cycle D2: Heat, cold (thermal shock) and moisture cycle
DIN EN ISO 9073-4 - Determination of tear resistance (Trapezoid tear strength) Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (Trapezoid tear strength)
DIN EN ISO 9073-2 Method A - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness (Method A)
DIN EN ISO 9073-2 - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness
DIN EN ISO 9073-2 (based on) - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness
DIN EN ISO 9073-18 - Tensile properties (grab tensile test) Textiles - Testmethods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
DIN EN ISO 9073-15 - Air permeability Textiles - Test methods for nonwovens - Part 15: Determination of air permeability
DIN EN ISO 8993 - Rating system for the evaluation of pitting corrosion Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
DIN EN ISO 899-1 - Determination of creep behavior Plastics, Determination of creep behavior, part 1: Tensile creep
DIN EN ISO 868 (Shore D) - Determination of Shore D hardness Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness D)
DIN EN ISO 868 (Shore A) - Determination of Shore A hardness Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness A)
DIN EN ISO 8510-2 - Peel test (180 degree) Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel
DIN EN ISO 846-C - Evaluation of the action of microorganismes - procedure C Plastics - Evaluation of the action of microorganisms; Method C: Resistance against bacteria
DIN EN ISO 846-B - Evaluation of the action of microorganismes - procedure B Plastics - Evaluation of the action of microorganisms; Method B: Fungi static effect
DIN EN ISO 846-A - Action of microorganisms - method A Plastics - Evaluation of the action of microorganisms; Method A: Fungal growth test
DIN EN ISO 845 - Determination of apparent density Cellular plastics and rubbers - Determination of apparent density
DIN EN ISO 8295 - Determination of the coefficients of friction Plastics - Film an sheeting - Determination of the coefficients of friction
DIN EN ISO 8256 (tensile_impact strength unnotched) - Determination of tensile_impact strength Plastics - Determination of tensile-impact strength (unnotched)
DIN EN ISO 8067-B - Tear strength (angle test specimens) Flexible cellular polymeric materials - Determination of tear strength - Method B (angle test specimens)
DIN EN ISO 8067-A - Tear strength (trouser-shaped test specimens) Flexible cellular polymeric materials - Determination of tear strength - Method A (trouser-shaped test specimens)
DIN EN ISO 8067 - Determination of tear strength Flexible cellular polymeric materials - Determination of tear strength
DIN EN ISO 787-9 - Determination of pH value General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension
DIN EN ISO 787-5 - Determination of oil absorption value General methods of test for pigments and extenders - Part 5: Determination of oil absorption value
DIN EN ISO 787-3 - Determination of matter soluble in water (Hot extraction method) General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water (Hot extraction method)
DIN EN ISO 787-2 - Determination of matter volatile at 105 °C General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 ° C
DIN EN ISO 787-10 - Determination of density (Pyknometer method) General methods of test for pigments and extenders - Part 10 : Determination of density (Pyknometer method)
DIN EN ISO 7854 (Method A) - Flexural resistance Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Beständigkeit gegen Beschädigung durch Biegen
DIN EN ISO 75-2 - Determination of temperature of deflection under load (Plastics and ebonite) Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
DIN EN ISO 75-2 - Determination of temperature of deflection under load Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
DIN EN ISO 75-1 - Determination of temperature of deflection under load (General test method) Plastics - Determination of temperature of deflection under load - Part 1: General test method
DIN EN ISO 6988 - Sulfur dioxide test with general condensation of moisture Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
DIN EN ISO 6942 - Evaluation of materials and material assemblies when exposed to a source of radiant heat Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
DIN EN ISO 6941 - Burn behaviour (vertical) Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
DIN EN ISO 6721-2 - Determination of dynamic mechanical properties (Torsion-pedulum method) Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pedulum method
DIN EN ISO 6603-2 - Puncture impact behaviour - Instrumented impact testing Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test
DIN EN ISO 6603-1 - Puncture impact behaviour - Non-instrumented impact testing Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DIN EN ISO 6507 - Vickers hardness test Metallic materials - Vickers hardness test - Part 1: Test method; Part 2: Verification and calibration of testing machines; Part 3: Calibration of reference blocks; Part 4: Tables of hardness values
DIN EN ISO 6427 (ISO 6427 : 1992) - Determination of matter extractable by organic solvents Plastics - Determination of matter extractable by organic solvents (conventional methods)
DIN EN ISO 6330 - Domestic washing and drying procedures for textile testing Textiles - Domestic washing and drying procedures for textile testing
DIN EN ISO 6330 - Domestic washing and drying procedures for textile testing Textiles - Domestic washing and drying procedures for textile testing
DIN EN ISO 6270-2-CH - Condensation atmosphere with constant humidity Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation atmosphere with constant humidity)
DIN EN ISO 6270-2-CH - Condensation atmosphere with constant humidity Paints and vanishes- Determination of resistance to humidity- part 2 : Condensation (in-cabinet exposure with heated water reservoir)
DIN EN ISO 6270-2-AT - Condensation climate with alternating air temperature Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation climate with alternating air temperature)
DIN EN ISO 6270-2-AHT - Condensation climate with alternating humidity and air temperature Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation climate with alternating humidity and air temperature)
DIN EN ISO 6245 - Determination of ash Mineral oil products - Determination of ash (775°C)
DIN EN ISO 62 - Water absorption Plastics - Determination of water absorption
DIN EN ISO 604 - Compressive Properties Plastics - Determination of compressive properties
DIN EN ISO 5470-2 - Abrasion test (Martindale) Rubber or plastic coated fabrics - Determiation of abrasion resistance
DIN EN ISO 5470-1 - Determination of abrasion resistance (Taber abrader) Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
DIN EN ISO 5470-1 - Determination of abrasion resistance (Taber abrader) Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
DIN EN ISO 5402-1 - Permanent folding (Flexometer method) Leather - Determination of flex resistance - Part 1: Flexometer method
DIN EN ISO 5402-1 - Permanent folding (Flexometer method) Leather - Determination of flex resistance - Part 1: Flexometer method
DIN EN ISO 5402 - Flex resistance (Flexometer method) Leather - Physical and mechanical tests - Determination of flex resistance by Flexometer method
DIN EN ISO 5398-4 - Determination of chromic oxide content Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES)
DIN EN ISO 527-5 - Tensile properties Plastics - Determiantion of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DIN EN ISO 527-4 - Tensile properties Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DIN EN ISO 527-4 (Test in tempering chamber - in heat) - Tensile properties Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (Test in tempering chamber - in heat)
DIN EN ISO 527-3 - Tensile properties Plastics - Determiantion of tensile properties - Part 3: Text conditions for films and sheets
DIN EN ISO 527-2 - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
DIN EN ISO 527-2 (Test in tempering chamber - in heat) - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (Test in tempering chamber - in heat)
DIN EN ISO 527-2 (Test in tempering chamber - in cold) - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (Test in tempering chamber - in cold)
DIN EN ISO 5084 - Determination of thickness Textiles - Determination of thickness of textiles and textile products
DIN EN ISO 5079 - Tensile properties of individual fibres Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres
DIN EN ISO 5077 - Determination of dimensional change Textiles - Determination of dimensional change in washing and drying
DIN EN ISO 4920 - Determination of resistance to surface wetting (Spray test) Textile fabrics - Determination of resistance to surface wetting (Spray test)
DIN EN ISO 4892-3 - Fluorescent UV lamps Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
DIN EN ISO 4892-2 (method B) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
DIN EN ISO 4892-2 (Method B - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 65°C
DIN EN ISO 4892-2 (Method B - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 100°C
DIN EN ISO 4892-2 (Method B - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 100°C
DIN EN ISO 4892-2 (method A) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
DIN EN ISO 4892-2 (Method A - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C
DIN EN ISO 4892-2 (Method A - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C
DIN EN ISO 4892-2 (Method A - BST 65°C / Flat bed device) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C / Flat bed device
DIN EN ISO 4892-2 (Method A - BST 65°C / Flat bed device) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C / Flat bed device
DIN EN ISO 4892-2 (Method A - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 100°C
DIN EN ISO 4684 - Determination of volatile matter Leather - Chemical tests - Determination of volatile matter
DIN EN ISO 4674-2 - Determination of tear resistance (Ballistic pendulum method) Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method
DIN EN ISO 4674-1 - Determination of tear resistance (Constant rate of tear methods) Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
DIN EN ISO 4628-8 - Assessment of degree of delamination and corrosion around a scribe or other artificial defect Paints and varnishes - Evaluation of degradation of coatings - Designation of quantiy and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial d
DIN EN ISO 4628-8 - Assessment of degree of delamination and corrosion around a scribe Paints and varnishes - Evaluation of degradation of coatings - Designation of quantiy and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (Replaced for DIN 531
DIN EN ISO 4628-5 - Assessment of degree of flaking Paints and varnishes - Evaluation of degredation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
DIN EN ISO 4628-4 - Assessment of degree of cracking Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
DIN EN ISO 4628-4 - Assessment of degree of cracking Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
DIN EN ISO 4628-3 - Assessment of degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
DIN EN ISO 4628-3 - Assessment of degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
DIN EN ISO 4628-2 - Assessment of degree of blistering Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
DIN EN ISO 4628-2 - Assessment of degree of blistering Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
DIN EN ISO 4628-1 - Evaluation of degradation of coatings Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - part 1 : General introduction and designation system
DIN EN ISO 4628-1 - Evaluation of degradation of coatings Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - part 1 : General introduction and designation system
DIN EN ISO 4577 - Determination of thermal oxidative stability in air, Oven method Plastics - Polypropylene and propylene-copolymers: Determination of thermal oxidative stability in air, Oven method
DIN EN ISO 4287 - Surface texture: Profile method Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DIN EN ISO 4098 - Determination of water-soluble matter Leather - Chemical test s- Determination of water-soluble matter, water soluble inorganic matter and water-soluble organic matter
DIN EN ISO 4048 - Determination of matter soluble in dichlormethane and free fatty acid content Leather - Determination of matter soluble in dichlormethane and free fatty acid content
DIN EN ISO 4048 - Determination matter soluble in dichloromethane Leather - Determination matter soluble in dichloromethane
DIN EN ISO 4045 - Determination of pH value Leather - Determination of pH
DIN EN ISO 3759 - Determination of dimensional change Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
DIN EN ISO 3679 - Determination of flash point Determination of flash point - Rapid equilibrium closed cup method
DIN EN ISO 3675 - Determination of density (Hydrometer method) Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
DIN EN ISO 3668 - Visual comparison of the colour of paints Paints and varnishes - Visual comparison of the colour of paints
DIN EN ISO 3497 - Determination of coating thickness and nickel content Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
DIN EN ISO 3451-5-A (PVC) - Ash content in PVC Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (here: method A: direct ash)
DIN EN ISO 3451-4-A (PA) - Ash content in Polyamides Plastics - Determination of ash - Part 4: Polyamides (here: method A: direct ash)
DIN EN ISO 3451-1-A - Determination of ash Plastics - Determination of ash - Part 1: General methods (here: procedure A: direct ash)
DIN EN ISO 3386-2 - Stress-strain characteristic in compression (High-density materials / > 250 kg/m_) Polymeric materials, cellular flixible - Determination of stress-strain characteristics in compression - Part 2: High-density materials
DIN EN ISO 3386-1 - Stress-strain characteristics in compression (low-density materials / <= 250 kg/m_) Polymeric materials, celular flexible - Determination of stress-strain characteristics in compression - Part 1: low-density materials
DIN EN ISO 3385 - Determination of fatigue by constant load pounding Flexible cellular polymeric materials - Determination of fatigue by constant load pounding
DIN EN ISO 3385 - Determination of fatigue by constant load pounding Flexible cellular polymeric materials - Determination of fatigue by constant load pounding
DIN EN ISO 3377-1 - Tear load (single edge tear) Leather - Physical and mechanical test - Determination of tear load - Part 1: Single edge tear
DIN EN ISO 3377-1 - Tear load Leather - Physical and mechanical test - Determination of tear load - Part 1: Single edge tear
DIN EN ISO 3376 - Tensile properties Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DIN EN ISO 3376 - Tensile properties Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DIN EN ISO 3344 - Determination of moisture content Reinforcement products - Determination of moisture content
DIN EN ISO 3251 - Determination of non-volatile-matter content Paints, varnishes and plastics - Determination of non-volatile-matter content
DIN EN ISO 3248 - Effect of heat Paints and varnishes - Determination of the effect of heat
DIN EN ISO 3231 - Corrosion resistance (Kesternich test) Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
DIN EN ISO 32100 - Flex resistance (flexometer method) Rubber- or plastic-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method
DIN EN ISO 3175-2 - Dry cleaning and finishing (Procedures for tetrachloroethene) Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene
DIN EN ISO 3146-C2 - Determination of melting behaviour (DSC) Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers (Part C2 = DSC, no longer in version 2002-06)
DIN EN ISO 3104 Petroleum products -Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DIN EN ISO 3071 - Determination of pH value Textiles - Determination of pH of aqueous extract
DIN EN ISO 307 - Determination of viscosity number Plastics - Polyamides - Determination of viscosity number
DIN EN ISO 306 - Vicat softening temperature Plastics - Thermoplastics material - Determination of Vicat softening temperature (VST)
DIN EN ISO 3037 - Determination of edgewise crush resistance Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxes edge method)
DIN EN ISO 294-4 - Injection moulding of test specimens of thermoplastic materials (Determination of moulding shrinkage) Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shinkage
DIN EN ISO 2813 - Gloss measurement Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
DIN EN ISO 2813 - gloss measurement Paints and varnishes - Determination of specular gloss of non-metallic coatings with 20 °, 60 ° and 85 ° (according to JIS K 5400 & MS & MS 652-14 600-60.)
DIN EN ISO 2812-4 - Resistance to liquids - Spotting methods Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
DIN EN ISO 2812-3 - Resistance to liquids - Method using an absorbent medium Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
DIN EN ISO 2812-1 - Resistance to liquids - immersion in liquids other than water Paints and varnishes - determination of resistance to liquids - Part 1: Method using immersion in liquids other than water
DIN EN ISO 2811-2 - Determination of density (Immersed body method) Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
DIN EN ISO 2811-1 - Determination of density (pyknometer) Paints and varnishes - Determination of density - Part 1: Pyknometer method
DIN EN ISO 2808-7D - Determination of film thickness - Amplitude_sensitive eddy current method Paints and varnishes - Determination of film thickness - Method 7D: Amplitude_sensitive eddy current method
DIN EN ISO 2808-7C (ISO 2808-7C) - Determination of film thickness - magnetic-induction principle Paints and varnishes - Determination of film thickness - Method 7C: magnetic-induction principle
DIN EN ISO 2808-6A (ISO 2808-6A) - Determination of film thickness - Microscopic examination of cross-section Paints and varnishes - Determination of film thickness - Method 6A: cross microsection / cross-section
DIN EN ISO 2808-12A - Determination of film thickness - magnetic induction Paints and varnishes - Determination of film thickness - Method 12A: magnetic induction
DIN EN ISO 2719 (PM) Determination of flash point - Pensky-Martens closed cup method , 40-200°C (ex. DIN EN 22719)
DIN EN ISO 26082-1 - Soiling and cleanability with modified Martindale method Leather - Physical and mechanical test method for the determination of soiling - Part 1: Rubbing (Martindale) method
DIN EN ISO 26082 - Soiling and cleanability with modified Martindale method Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather
DIN EN ISO 2589 - Determination of thickness Leather - Physical and mechanical tests - Determination of thickness
DIN EN ISO 2440 (humidity ageing) - Accelerated ageing test Flexible and rigid cellular polymetric materials - Accelerated ageing tests (humidity ageing)
DIN EN ISO 2440 (Dry heat ageing) - Accelerated ageing test Flexible and rigid cellular polymeric materials - accelerated ageing tests (dry heat ageing)
DIN EN ISO 2439 - Indentation hardness test Flexible cellular polymeric materials - Determination of hardness (indentation technique)
DIN EN ISO 2420 - Determination of apparent density Leather - Physical and mechanical tests - Determination of apparent density
DIN EN ISO 2420 - Apparent density and mass per unit area Leather - Physical and mechanical tests - Detrmination of apparent density and mass per unit area
DIN EN ISO 2411 - Determination of coating adhesion Rubber- or plastics-coated fabrics - Determination of coating adhesion
DIN EN ISO 2411 - Determination of coating adhesion Rubber- or plastics-coated fabrics - Determination of coating adhesion
DIN EN ISO 2409 - Cross-cut test Paints and varnishes - Cross-cut test
DIN EN ISO 2409 - Cross-cut test Paints and varnishes - Cross-cut-test
DIN EN ISO 23997 - Determination of mass per unit area Resilient floor coverings - Determination of mass per unit area
DIN EN ISO 23910 - Stitch tear resistance Leather - Physical and mechanical tests - Measurement of stitch tear resistance
DIN EN ISO 2360 - Measurement of coating thickness - Amplitude_sensitive eddy current method Non-conductive coatings on non-amgnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
DIN EN ISO 2286-3 - Determination of thickness Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
DIN EN ISO 2286-3 - Determination of thickness Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
DIN EN ISO 2286-2 - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate Rubber- or plastics-coated fabric - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DIN EN ISO 22088-3 - per Strain of the outer fibre /Resistance to stress cracking, bent strip method Plastics - Determination of resistance to environmental stress cracking ( ESC ) - Part 3: Bent strip method (replacement for DIN EN ISO 4599)
DIN EN ISO 2178 - Coating Thicknesses by the Magnetic Method Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
DIN EN ISO 2177 - Measurement of coating thickness - Coulometric method by anodic dissolution Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (also ASTM B 504)
DIN EN ISO 2081 - Determination of layer weight Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
DIN EN ISO 2062 - Tensile properties Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break
DIN EN ISO 2061 - Determination of twist in yarns - Direct counting method Textiles - Determination of twist in yarns - Direct counting method
DIN EN ISO 2060 - Determination of linear density by the skein method Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
DIN EN ISO 20567-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes - Determination of stone-chip resistance of coatins - Part 1: Multi-impact testing
DIN EN ISO 20567-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes - Determination of stone-chip resistance of coatins - Part 1: Multi-impact testing
DIN EN ISO 20566 - scratch resistance Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
DIN EN ISO 2039-2 - Determination of Rockwell hardness Plastics - Determination of hardness - Part 2: Rockwell hardness
DIN EN ISO 2039-1 - Determination of hardness, Ball indentation method Plastics - Determination of hardness - Part 1: Ball indentation method
DIN EN ISO 1973 - Determination of linear density (Vibroscope method) Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
DIN EN ISO 1973 - Determination of linear density (gravimetric method) Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
DIN EN ISO 1924-2 - Determination of tensile properties Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min)
DIN EN ISO 1923 - Determination of linear dimensions Cellular plastics and rubbers - Determination of linear dimensions
DIN EN ISO 1856-C - Compression set under specially defined conditions Flexible cellular polymeric materials - Determination of compression set; Method C: compression set under specially defined conditions
DIN EN ISO 1856-B - Compression set at standard conditioning temperature Flexible cellular polymeric materials - Determination of compression set; method B: Compression set at standard conditioning temperature)
DIN EN ISO 1856-A / ISO 1856-A - Compression set at 70°C Flexible cellular polymeric materials - Determination of compression set; Method A: compression set at 70°C
DIN EN ISO 18412 (D40) / DIN EN ISO 11885 (E22) - Determination of chromium(VI) Water quality - Determination of Chromium (VI) - Photometric method for weakly contaminated water / Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
DIN EN ISO 1833-11 - Method using sulfuric acid Textiles - Quantitative chemical analysis - Part 11: Mixture of cellulose and polyester fibres (method using sulfuric acid)
DIN EN ISO 180/U (Izod impact strength) - Determination of Izod impact properties, unnotched Plastics - Determination of Izod impact strength (unnotched)
DIN EN ISO 180/B (Izod impact strength, notched) - Determination of Izod impact properties, notched Plastics - Determination of Izod impact strength (notched, type B)
DIN EN ISO 180/A (Izod impact strength, notched) - Determination of Izod impact properties, notched Plastics - Determination of Izod impact strength (notched, type A)
DIN EN ISO 1798 - Tensile properties Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
DIN EN ISO 179-1/1fU (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eU (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eC (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eB (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eA (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1 (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1 (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1 (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DIN EN ISO 178 - Three-point bending test Plastics - Determination of flexural properties
DIN EN ISO 178 - Flexural properties Plastics - Determination of flexural properties
DIN EN ISO 178 (Test in tempering chamber - in heat) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in heat)
DIN EN ISO 178 (Test in tempering chamber - in heat) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in heat)
DIN EN ISO 178 (Test in tempering chamber - in cold) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in cold)
DIN EN ISO 178 (Test in tempering chamber - in cold) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in cold)
DIN EN ISO 17294-2 (E29) - inductively coupled plasma mass spektrometry Water quality - Application of inductively coupled plasma mass spektrometry (ICP-MS) - Part 2: Determination of 62 elements
DIN EN ISO 17235 - Determining of softness of leather Leather - Physical and mechanical tests - Determination of softness
DIN EN ISO 17226-3 - Determination of formaldehyde content (HPLC) by the flask method Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather
DIN EN ISO 17226-2 - Determination of the formaldehyde content (Method using colorimetric analysis) Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis
DIN EN ISO 17226-1 - Determination of formaldehyde content (HPLC) Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography
DIN EN ISO 17186 - Surface coating thickness (Microscopical method) Leather - Physical and mechanical tests - Determination of surface coating thickness (Microscopical method)
DIN EN ISO 17186 - Surface coating thickness (Microscopical method) Leather - Physical and mechanical tests - Determination of surface coating thickness (Microscopical method)
DIN EN ISO 17076-2 - Abrasion resistance Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method
DIN EN ISO 17076-1 - Abrasion resistance (Taber method) Leather - Determination of abrasion resistance - Part 1: Taber method
DIN EN ISO 17075 - Determination of chromium(VI) content Leather - Chemical tests - Determination of chromium (VI) content
DIN EN ISO 17071-B - Fogging characteristics (gravimetric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method B (gravimetric)
DIN EN ISO 17071-A - Fogging characteristics (reflektometric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method A (reflektometric)
DIN EN ISO 17070 - Determination of pentachlorophenol content Leather - Chemical tests - Determination of pentachlorophenol content (PCP)
DIN EN ISO 17070 - Determination of pentachlorophenol content Leather - Chemical tests - Determination of pentachlorophenol content (PCP)
DIN EN ISO 16925 - Resistance to pressure water-jetting Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
DIN EN ISO 1628-3 - Determination of viscosity number Plastics- Determination of the viscosity of polymers in dilute solution using capillary viscometers- Part3: Polyethylene and Polypropylene
DIN EN ISO 1628-1 - Determination of the viscosity number Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
DIN EN ISO 16017-2 - Sampling and analysis of volatile organic compounds (Diffusive sampling) Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
DIN EN ISO 16017-1 - Analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography (Pumped sampling) Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Pumped sampling
DIN EN ISO 16000-9 - Emission test chamber method Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method
DIN EN ISO 16000-5 / DIN ISO 16000-6 / VDI 4300-6 - Sampling of volatile organic compounds (VOCs) Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) and Part 6: Determination of volatile organic compounds (VOCs) in indoor and test chamber air by active sampling on TENAX TA¨ sorbent, thermal desorption and gas chromatography u
DIN EN ISO 15702 - Colour fastness to machine washing Leather - Tests for colour fastness - Colour fastness to machine washing
DIN EN ISO 15701 - Colour fastness to migration Leather - Tests for colour fastness - Colour fastness to migration into polymeric material
DIN EN ISO 15700 - Colour fastness to water spotting Leather - Tests for colour fastness - Colour fastness to water spotting
DIN EN ISO 15487 - Self-flatness behaviour Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying
DIN EN ISO 1518-1 § 7.3 Test with a fixed test load - Determination of scratch resistance Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
DIN EN ISO 1463 - Measurement of coating thickness (Microscopical method) Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DIN EN ISO 1456 (Appendix B) - Determination of film thickness Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium Appendix B: Test method for determining film thickness
DIN EN ISO 14419 - in accordance to - Oil repellency Textiles - Oil repellency - Examination of oil repellency under the help of hydrocarbons
DIN EN ISO 14419 - Hydrocarbon resistance test Textiles - Oil repellency - Hydrocarbon resistance test
DIN EN ISO 14419 (based on; according to DBL 5463 4.12) - Hydrocarbon resistance test Textiles - Oil repellency - Hydrocarbon resistance test (according to DBL 5463 § 4.12)
DIN EN ISO 14389 - Determination of phthalates Textiles - Determination of the phthalates content - Tetrahydrofuran method
DIN EN ISO 14268 - Water vapour permeability Leather - Physical and mechanical tests - Determination of water vapour permeability
DIN EN ISO 14268 - Water vapour permeability Leather - Physical and mechanical tests - Determination of water vapour permeability
DIN EN ISO 1421, Procedure 1 - Tensile test (strip method) Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break, method 1: strip method
DIN EN ISO 1421 - Tensile properties Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
DIN EN ISO 14184-1 - Concentration of formaldehyde (water extraction method) Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
DIN EN ISO 14130 - Determination of apparent interlaminar shear strength (short-beam method) Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method
DIN EN ISO 14125 (Method B) - Determination of flexural properties, four-point flexural test Fibre-reinforced plastic composites - Determination of flexural properties; Method B: Four-point bending test
DIN EN ISO 14125 (Method A) with temperature - Determination of flexural properties, three-point bending test Fibre reinforced plastics - Determination of flexural properties; Method A: three-point bending test - at temperature
DIN EN ISO 14125 (Method A) - Determination of flexural properties, three-point flexural test Fibre-reinforced plastic composites - Determination of flexural properties; Method A: Three-point bending test
DIN EN ISO 13938-2 - Determination of bursting strength and bursting distension (Pneumatic method) Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension
DIN EN ISO 13937-3 - Determination of tear force of wing-shaped test specimens Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
DIN EN ISO 13937-2 - Determination of tear force of trouser-shaped test specimens Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
DIN EN ISO 13937-1 - Determination of tear force using ballistic pendulum method (Elmendorf) Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
DIN EN ISO 13936-2 - Slippage resistance (Fixed load method) Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
DIN EN ISO 13936-1 - Slippage resistance (Fixed seam opening method) Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method
DIN EN ISO 13935-2 - Seam tensile properties (grab method) Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
DIN EN ISO 13935-1 - Seam tensile properties (strip method) Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method
DIN EN ISO 13934-2 - Tensile properties (grab method) Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method
DIN EN ISO 13934-1 in Heat - Tensile properties (strip method) Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 13934-1 - Tensile properties (strip method) Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 12947-4 - Assessment of appearance change Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change
DIN EN ISO 12947-3 - Determination of mass loss Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss
DIN EN ISO 12947-2 - Determination of specimen breakdown Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
DIN EN ISO 12947-2 - Determination of specimen breakdown Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
DIN EN ISO 12945-2 - Modified Martindale method Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method
DIN EN ISO 12945-1 - Pilling box method Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method
DIN EN ISO 12625-8 - Water-absorption and water-absorption capacity Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
DIN EN ISO 12570 - Determination of moisture content Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature
DIN EN ISO 12570 - Determination of moisture content Hygrothermal performance of building maerials and products- Determination of moisture content by drying at elevated temperature
DIN EN ISO 12185 - Determination of density Crude petroleum and petroleum products - Determination of density - Oscillation U-tube method
DIN EN ISO 11997-1, cycle B - Corrosion test Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog) / dry / humidity (here: cycle B)
DIN EN ISO 11925-2 - ignition behaviour Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
DIN EN ISO 11909 - Determination of polyisocyanate Binders for paints and varnishes - Polyisocyanate resins - General methods of test
DIN EN ISO 11885 (E22) - Determination of selected elements by ICP-OES Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
DIN EN ISO 1183-3 (Gas-Pyknometer-Verfahren) - Determination of density Plastics - Methods for determinig the density of non-cellular plastics - Part 3: Gas pyknometer method
DIN EN ISO 1183-1 (Method B: liquid pyknometer) - Determination of density Plastics - Methods for determining the density of non-cellular plastics - Part1: Immersion method, liquid pyknometer method and titration method (here: liquid pyknometer)
DIN EN ISO 1183-1 (Method A: immersion method) - Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (here: immersion method)
DIN EN ISO 1172-B/HCl - Residue on ignition Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of textile-glass and mineral-filler content - Calcination methods; Method A: with mineral filling material
DIN EN ISO 1172-A - Residue on ignition Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of textile-glass and mineral-filler content - Calcination methods; Method A: without mineral filling material
DIN EN ISO 11664-4 - Colour measurement (CIELAB) Colorimetry - Part 4: CIE 1976 L*a*b* Color space
DIN EN ISO 11644 - Test for adhesion of finish Leather - Test for adhesion of finish
DIN EN ISO 11644 - Test for adhesion of finish Leather - Test for adhesion of finish
DIN EN ISO 11643 - Colour fastness to dry-cleaning solutions Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions
DIN EN ISO 11642 - Colour fastness to water Leather - Tests for colour fastness- Colour fastness to water
DIN EN ISO 11641 - Colour fastness to perspiration Leather - Tests for colour fastness - Colour fastness to perspiration
DIN EN ISO 11640 - Colour fastness (Veslic abrasion) Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbung (Veslic abrasion)
DIN EN ISO 11501 - Measurement of dimensional change Plastics - film and sheeting - Determination of dimensional change on heating
DIN EN ISO 11403-1 § 6.3 (DIN EN ISO 527-1/-2) - Tensile properties at constant test speed (comparative test at different temperatures) Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties; § 6.3
DIN EN ISO 11357-6 - Determinaton of OIT (DSC) Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DIN EN ISO 11357-1 / ISO 11357-3 Kunststoffe; Dynamische Differenz-Thermoanalyse (DSC); Teil 1: Allgemeine Grundlagen; Teil 3: Bestimmung der Schmelz- und Kristallisationstemperatur und der Schmelz- und Kristallisationsenthalpie
DIN EN ISO 11341 (procedure 1) - Artifical weathering Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (Procedure 1)
DIN EN ISO 11339 - separation test (T-peel test) Adhesives - T-peel test for flexible-to-flexible bonded assemblies
DIN EN ISO 1133-B - Determination of melt mass-flow rate by length of run measurement (Method B) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method B: length of run measurement)
DIN EN ISO 1133-B - Determination of melt mass-flow rate by length of run measurement (Method B) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method B: length of run measurement)
DIN EN ISO 1133-A - Determination of Melt mass-flow rate by mass determination (Method A) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method A: Mass determination procedure)
DIN EN ISO 1133-2-B - Procedure B: Distance length measuring procedure (method for materials sensitive to time-temperature history and/or moisture) Plastics- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics- Part 2: Method for materials sensitive to time-temperature history and/or moisture
DIN EN ISO 1133-1 - Determination of the melt flow behavior Plastics- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
DIN EN ISO 1110 - Accelerated conditioning of test specimens Kunststoffe - Polyamide; Beschleunigte Konditionierung von Probekörpern
DIN EN ISO 11092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions
DIN EN ISO 105-X18 - Yellowing by phenols Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials
DIN EN ISO 105-X12 - Colour fastness to rubbing Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
DIN EN ISO 105-X11 - Colour fastness to hot pressing Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing
DIN EN ISO 105-X05 - Colour fastness to organic solvents Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents
DIN EN ISO 105-X04 - Colour fastness to mercerizing Textiles - Tests for colour fastness - Part X04: Colour fastness to mercerizing
DIN EN ISO 105-X02 - Colour fastness to carbonizing: Sulphuric acid Textiles - Tests for colour fastness - Part X02: Colour fastness to carbonizing: Sulphuric acid
DIN EN ISO 105-X01 - Colour fastness to carbonizing: Aluminium chloride Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride
DIN EN ISO 105-P01 - Colour fastness to dry heat (excluding pressing) Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat (excluding pressing)
DIN EN ISO 105-N04 - Colour fastness to bleaching: Sodium chlorite (severe) Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
DIN EN ISO 105-N03 - Colour fastness to bleaching: Sodium chlorite (mild) Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
DIN EN ISO 105-N02 - Colour fastness to bleaching: Peroxide Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching: Peroxide
DIN EN ISO 105-N01 - Colour fastness to bleaching: Hypochlorite Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite
DIN EN ISO 105-E14 - Colour fastness to acid-felting (Mild) Textiles - Tests for colour fastness - Part E14 : Colour fastness to acid-felting (Mild)
DIN EN ISO 105-E13 - Colour fastness to acid-felting (Severe) Textiles - Tests for colour fastness - Part E13: Colour fastness to acid-felting (Severe)
DIN EN ISO 105-E12 - Colour fastness to alkaline milling Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling
DIN EN ISO 105-E10 - Colour fastness to decatizing Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing
DIN EN ISO 105-E09 - Colour fastness to potting Textiles - Tests for colour fastness - Part E09: Colour fastness to potting
DIN EN ISO 105-E08 - Colour fastness to hot water (70°C) Textiles - Tests for colour fastness - Part E08: Colour fastness to hot water
DIN EN ISO 105-E07 - Colour fastness to spotting - Water Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water
DIN EN ISO 105-E06 - Colour fastness to spotting - alkali Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: alkali
DIN EN ISO 105-E05 - Colour fastness to spotting - Acid Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting - Acid
DIN EN ISO 105-E04 (alkaline) - Colour fastness to perspiration (alkaline) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (alkaline)
DIN EN ISO 105-E04 (alkaline) - Colour fastness to perspiration (alkaline) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (alkaline)
DIN EN ISO 105-E04 (acid) - Colour fastness to perspiration (acid) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (acidic)
DIN EN ISO 105-E04 (acid) - Colour fastness to perspiration (acid) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (acidic)
DIN EN ISO 105-E03 - Colour fastness to chlorinated water Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water)
DIN EN ISO 105-E02 - Colour fastness to sea water Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
DIN EN ISO 105-E02 - Colour fastness to sea water Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
DIN EN ISO 105-E01 - Colour fastness to water Textiles - Tests for colour fastness - Part E01: Colour fastness to water
DIN EN ISO 105-D02 - Colour fastness to rubbing: Organic solvents Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents
DIN EN ISO 105-D01 - Colour fastness to dry cleaning Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning
DIN EN ISO 105-D01 - Colour fastness to dry cleaning Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchlorethylene solvent
DIN EN ISO 105-C12 - Colour fastness to industrial laundering Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering
DIN EN ISO 105-C10 - Colour fastness to washing with soap or soap and soda Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda
DIN EN ISO 105-C08 - Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
DIN EN ISO 105-C06 - Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering
DIN EN ISO 105-C05 - Colour fastness to washing: Test 1 (at 95°C) Textiles - Tests for colour fastness - Part C05: Colour fastness to washing: Test 5 (at 95°C)
DIN EN ISO 105-C04 - Colour fastness to washing: Test 4 (at 95°C) Textiles - Tests for colour fastness - Part C04: Colour fastness to washing: Test 4 (at 95°C)
DIN EN ISO 105-C03 - Colour fastness to washing: Test 3 (at 60°C) Textiles - Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 (at 60°C)
DIN EN ISO 105-C02 - Colour fastness to washing: Test 2 (at 50°C) Textiles - Tests for colour fastness - Part C02: Colour fastness to washing: Test 2 (at 50°C)
DIN EN ISO 105-C01 - Colour fastness to washing: Test 1 (at 40°C) Textiles - Tests for colour fastness - Part C01: Colour fastness to washing: Test 1 (at 40°C)
DIN EN ISO 105-B06 (Exposure condition no. 5) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 5)
DIN EN ISO 105-B06 (Exposure condition no. 3), HLA - Aging test (Multiple Exposure) Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exposure condition no. 3) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 3)
DIN EN ISO 105-B06 (Exposure condition no. 2) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 2)
DIN EN ISO 105-B06 (Exposure condition no. 1) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 1)
DIN EN ISO 105-B06 (Exp. Nr. 3), HLA acc. to BST 90°C - Aging test (Multiple Exposure) Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exp. no. 3) according to, BST 90°C - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B04 (procedure 3) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B04 (procedure 2) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B04 (procedure 1) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B02 (procedure 5) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 5)
DIN EN ISO 105-B02 (procedure 5) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 5)
DIN EN ISO 105-B02 (procedure 4) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 4)
DIN EN ISO 105-B02 (procedure 4) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 4)
DIN EN ISO 105-B02 (procedure 3) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B02 (procedure 3) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B02 (procedure 2) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B02 (procedure 2) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B02 (procedure 1) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B02 (procedure 1) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-A06 - Instrumental determination of 1/1 standard depth of colour Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
DIN EN ISO 105-A05 - Instrumental assessment of change in colour Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
DIN EN ISO 105-A04 - Instrumental assessment of the degree of staining of adjacent fabrics Textiles - Tests for colour fastness - Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
DIN EN 986 - Dimensional change Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
DIN EN 863 - Puncture resistance Protective clothing - Mechanical properties - Test method: Puncture resistance
DIN EN 827 - Determination of conventional solids content and constant mass solids content Adhesives - Determination of conventional solids content and constant mass solids content
DIN EN 717-2 - Formaldehyde release by the gas analysis method Wood-based panels - Determination of formaldehyde release - Part 2 : Formaldehyde release by the gas analysis method
DIN EN 717-1 - Formaldehyde emission by the chamber method Wood-based panels - Determination of formaldyhyde release - Part 1: Formaldehyde emission by the chamber method
DIN EN 71-3 - Migration of certain elements Safety of toys - Part 3: Migration of certain elements
DIN EN 71-2 - Flammability Safety of toys - Part 2: Flammability
DIN EN 71-11 § 5.8 - Determination of phosphates Safety of toys - Part 11: Organic chemical compounds - methods of analysis; § 5.8: Plasticiser
DIN EN 62631-3-3 - Insulation resistance Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance
DIN EN 62321/VDE 0042-1 chapter 7 (closed vessel/microwave) - Determination of mercury in polymers, metals and electronics Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); § 7: Determination of mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES a
DIN EN 62321/VDE 0042-1 Annex C - Determination of chrome(VI) Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); Appendix C: Determination of chromium VI in polymers and electronics using a colorimetric method
DIN EN 62321/VDE 0042-1 Annex A - Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers with GC-MS Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); Appendix A: Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers
DIN EN 62321/VDE 0042-1 (closed vessel/microwave) - Determination of the total content of selected elements with atomic emission spectrometry (ICP-OES) Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr-VI, polybrominated biphenyls, polybrominated diphenyl ethers)
DIN EN 61439-1 (VDE 0660-600-1) § 10.2.2.3/4 - Cyclic corrosion test with salt spray test Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2011) § 10.2.2.3/4 Testing for sharpness B with evaluation
DIN EN 60695-2-13; VDE 0471-2-13 (IEC 60695-2-13) - GWIT (Glow Wire Ignition Temperature) Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
DIN EN 60695-2-12; VDE 0471-2-12 (IEC 60695-2-12) - GWFI (Glow Wire Flammability Index) Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods; Glow-wire flammability test method for materials
DIN EN 60695-2-11; VDE 0471-2-11 (IEC 60695-2-11) - Glow Wire Test Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability test method for end-products
DIN EN 60247; VDE 0380 - Measurement of relative permittivity Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
DIN EN 60156; VDE 0370-5 - Determination of the breakdown voltage (insulatingoil) Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156: 1995);
DIN EN 60112 / VDE 0303-11 (IEC 60112) - CTI - Determation of the comparative tracking indices Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DIN EN 60068-2-78 / IEC 60068-2-78 - Damp heat, steady state Environmental testing Part 2-78: Tests - test Cab: Damp heat, steady state
DIN EN 60068-2-70 / IEC 68-2-70 - Resistance to abrasion (Abrex) Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (Abrex)
DIN EN 60068-2-60 - Method 4 - Corrosion test with flowing Gas Environmental testing - Part 2: Tests - Test Ke: flowing mixed gas corrosion test
DIN EN 60068-2-52 / IEC 68-2-52 - saltspray test Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
DIN EN 60068-2-30 - Climate cycle test Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DIN EN 60068-2-2 / VDE 0468-2-2 - Heat storage Environmental testing - Part 2-2: Tests - Test B: Dry heat
DIN EN 60068-2-14 § 8 (IEC 60068-2-14) - Test Nb:Changes of temperature with specified rate of change Enviromental testing - Part 2-14: Tests - Test N: Change of temperature; § 8: Test Nb: Changes of temperature with specified rate of change
DIN EN 60068-2-14 § 7 (IEC 60068-2-14) - Test Na: Rapid change of temperature with prescribed time of transfer Enviromental testing - Part 2-14: Tests - Test N: Change of temperature; § 7: Test Na: Rapid change of temperature with prescribed time of transfer
DIN EN 60068-2-11 - Salt mist test Environmental testing - Part 2: Tests - Test Ka: Salt mist
DIN EN 60068-2-1 / VDE 0468-2-1 - Cold storage Environmental testing - Part 2-1: Tests - Test A: Cold
DIN EN 60 (625°C) - Determination of loss on ignition Glass-reinforced plastics - Determination of loss on ignition (625°C)
DIN EN 513 - Method 1, Simulation temperate climate zone (M) - Artificial radiation exposure or weathering Unplasticized PVC profiles for the fabrication of windows and doors - Determination of the resisance to artificial weathering
DIN EN 438-2 § 11 - Resistance to abrasion High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; § 11: Resistance to abrasion
DIN EN 420 § 6.5 - Water vapour absorption Absorption of vapour - Protective gloves - General requirements for gloves; § 6.5: Test method for determination of water vapour absorption
DIN EN 388 - Penetration force - Puncture test with a steel pin Protective gloves against mechanical risks; Penetration force
DIN EN 367 - Determining of the heat transmission on exposure to flame Protective clothing - Protection against heat and flames - Test method: determining of the heat transmission on exposure to flame
DIN EN 3665 - Filiform corrosion resistance test Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys
DIN EN 323 - Determination of density Wood-based panels - Determination of density
DIN EN 322 - Determination of moisture content Wood-based panels - Determination of moisture content
DIN EN 317 - Swelling in thickness after immersion in water Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
DIN EN 31092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions
DIN EN 31092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
DIN EN 310 - Flexural properties Wood-based panels - Determination of modulus of elasticity in bending and of bending strength,
DIN EN 29865 / ISO 9865 - Bundesmann rain-shower test Textiles - Determination of water repellency of fabrics by the Bundesmann rain-shower test
DIN EN 29073-3 - Determination of tensile strength and elongation Textiles - Test method for nonwovens - Part 3: Determination of tensile strength and elongation
DIN EN 29073-1 (ISO 9073-1, 1989-07) - Determination of mass per unit area Textiles - test method for nonwovens - Part 1: determination of mass per unit area
DIN EN 25077 - Determination of dimensional change in washing and drying Textiles - Determination of dimensional change in washing and drying
DIN EN 24920 / ISO 4920 - Determination of resistance to surface wetting (Spray test) Textile fabrics - Determination of resistance to surface wetting (Spray test)
DIN EN 22313 - Determination of the recovery from creasing Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
DIN EN 20811 - Hydrostatic pressure test Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test
DIN EN 20105-A03 / ISO 105-A03 - Grey scale for assessing staining Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining
DIN EN 20105-A02 / ISO 105-A02 - Grey scale for assessing change in colour Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
DIN EN 1963 - Determination of surface mass loss through Tretradgerät System Lisson Textile floor coverings - Tests using the Lisson Tretrad Machine
DIN EN 1939 - peel adhesion properties Self adhesive tapes - Determination of peel adhesion properties
DIN EN 1876-1 - Bending test at low temperature Rubber- or plastics-coated fabrics - Low temperature tests - Part 1: Bending test
DIN EN 1811 - Release of nickel Reference test method for release of nickel from post assemblies which are inserted into pierced parts of the human body and products intended to come into direct and prolonged contact with the skin
DIN EN 1811 - Release of nickel Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
DIN EN 1811 - Release of nickel Reference test method for release of nickel from post assemblies which are inserted into pierced parts of the human body and products intended to come into direct and prolonged contact with the skin
DIN EN 1773 - Determination of width and length Textiles - Fabrics - Determination of width and length
DIN EN 1604 - Dimensional stability Thermal insulating products for building applications - Determination of dimensional stabiliy under specified temperature and humidity conditions
DIN EN 15977 - Determination of elongation and permanent deformation Rubber or plastic coated fabrics - Mechanical properties - Determination of elongation under load and residual deformation
DIN EN 15598 - Pile loop tear out resistance Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction
DIN EN 15336 - Determination of the time to rupture of bonded joints under static load Adhesive - Determination of the time to rupture of bonded joints under static load
DIN EN 15104-N Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 14971 - Determination of number of stitches Textiles - Knitted fabrics - Determination of number of stitches per unit lenght and unit area
DIN EN 14704-1 - Determination of elasticity, strip test Determination of the elasticity of fabrics - Part 1: Strip tests
DIN EN 1465 - Tensile lap-shear strength Adhesives - Determination of tensile lap-shear strength of bonded assemblies
DIN EN 1464 - Peel resistance Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method
DIN EN 1464 - Peel resistance Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
DIN EN 14621 - Methods of tests for textured or non-textured filament yarns Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DIN EN 14288-B - Fogging characteristics (gravimetric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method B (gravimetric)
DIN EN 14288-A - Fogging characteristics (reflektometric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method A (reflektometric)
DIN EN 14112 Fat and oil derivatives - Fatty Acid Methyl Ester ( FAME ) Determination of oxidation stability ( accelerated oxidation test )
DIN EN 14111 Fat an oil derivatives - Fatty acid methyl esters ( FAME ) - Determination of iodine value
DIN EN 14107 Fat and oil derivatives - Fatty acid methyl esters ( FAME ) Determination of phosphours content by inductively coupled plasma ( ICP ) emission spectrometry
DIN EN 13895 - Tensile test
DIN EN 13844 - Thermal shrinkage Textiles - Monofilaments - Determination of thermal shrinkage
DIN EN 13823 - Thermal attack by (SBI) DIN EN 13823 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
DIN EN 13758-1 - Determination of the UV protection of clothes Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
DIN EN 13657-9.2 / DIN EN 13346-C (S7a) - Determination of acid-soluble elements Characterization of sludges - determination of trace elements and phosphorus - aqua regia extraction method; HC- pulping - closed microwave
DIN EN 13512 - buckling strength Test methods for uppers and lining - buckling strength
DIN EN 13392 - Determination of linear density
DIN EN 13274-4 (method 3) Respiratory protective devices - Part 4: Flame tests - Method 3: One burner testing with moving test sample
DIN EN 13130-4, based on - Determination of 1,3_butadiene Materials and articles in contact with foodstuffs - Plastics substances subjects to limitation - Part 4: Determination of 1,3-butadiene in plastics
DIN EN 13130-4 - Determination of 1,3_butadiene Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
DIN EN 12720 - Surface resistance against cold liquids Furniture - Assessment of surface resistance to cold liquids
DIN EN 12667 - Determination of thermal resistance Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
DIN EN 12540 (Appendix E) - Disruptions in chrome coatings Corrosion protection of metals- Electrodeposited coating of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; Appendix E: Disruptions in chrome coatings
DIN EN 12393 / BVL L 00.00-48 - Gas chromatographic determination of pesticide residues DIN EN 12393: Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues / BVL L 00.00-48: Examination of foods - fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide r
DIN EN 12373-4 - Dye spot test with prior acid treatment Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
DIN EN 12311-1 - Tensile properties Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof watterpoofing, determination of tensile properties
DIN EN 12127 - Determination of mass per unit area Textiles - Fabrics - Determination of mass per unit area using small samples
DIN EN 12087, Procedure 2 - Determination of water absorbtion Thermal insulating products for building applications - Determination of long term water absorption by immersion; Method 2: Total immersion
DIN EN 1103 - Textiles - Fabrics of apparel - Detailed Procedure to determine the burning behaviour Fabrics for apparel
DIN EN 1049-2 - Number of threads Textiles - woven fabrics - Construction - Methods of analysis; Part 2: Determination of number of threads per unit length
DIN EN 1021-2 - Match flame test Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent
DIN EN 1021-1 - Cigarette test Furniture - Assessment of the ignitiabiliy of upholstered furniture - Part 1: Ignition source smouldering cigarette
DIN CEN/TS 15370-1 - NOCH NICHT ÜBERSETZT Solid biofuels - Method for the determination of ash melting behaviour - Characteristic temperatures method
DIN 75220-Z - Sun simulation (cycle test) ageing of Automobile Components in Solar Simulation Units (cycle Test)
DIN 75220-D - Sun simulation (long term testing) Ageing Automobile Components in Solar Simulation Units (Long term Testing)
DIN 75201-B - Fogging (gravimetric) Determination of the fogging characteristics of trim materials in the interior of automobiles; Method B (gravimetric)
DIN 75201-A - Fogging (reflectometric) Determination of the fogging characteristics of trim materials in the interior of automobiles; Method A (reflectometric)
DIN 75200 - Burning behaviour Determination of burning behaviour of interior materials in motor vehicles
DIN 68861-1: Furniture surfaces, Part 1: Behaviour at chemical influence This standard applies to the not contained in DIN EN 12720 specifications for assessment procedures of furniture surfaces against chemical attack and for rigid surfaces of surface-treated furniture irrespective of the material used, except for surfaces ma
DIN 67530 - Gloss measurement Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
DIN 62050 - Presentation and pattern design Knitted fabrics - Presentation and pattern design
DIN 6174 - Colour measurement (CIELAB) Colorimetric evaluation of colour coordinates and colour differences to the approximated uniform CIELAB colour space
DIN 6167 - Yellowness Description of yellowness of near-white or near-colourness materials
DIN 55996-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes Stone chip resistance test for coatings Part 1: Multi impact test
DIN 55913-2 § 2.9 - Determination of loss on ignition Pigments - Iron oxide pigments - methods for analysis; § 2.9: Determination of loss on ignition
DIN 55662 - Testing of resistance to pressure-water jetting Paints and varnishes - Coatings for automotive industry - Testing of resistance to pressure-water jetting
DIN 55660-2 - Determination of the free surface energy of solid surfaces Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
DIN 54836 - Determination of ignition temperature Testing of combustible materials - determination of ignition temperaure
DIN 54345-1 - Electrostatic behaviour Testing of textiles - electrostatic behaviour - determination of electrical resistance
DIN 54316 - Determination of thickness loss of textile floor coverings at static load Testing of textiles - determination of thickness loss of textile floor coverings at static load
DIN 54310 - Mechanical delamination test Testing of textiles - delamination of fusible interlinings from upper fabrics; mechanical delamination test
DIN 54301 - Determination of stitch point tearing out resistance Testing of textiles - determination of stitch point tearing out resistance of bonded-fibre fabrics, felts, and similar fabrics
DIN 54288 - Quantitative determination of sulfur in viscose fibres Testing of textiles - quantitative determination of sulfur in viscose fibres
DIN 54287 - Determination of alkali content of wool Testing of textiles - determination of alkali content of wool
DIN 54285 - Determination of sizing content Testing of textiles - determination of sizing content
DIN 54281 - Determination alkali solubility of wool Testing of textiles - determination alkali solubility of wool
DIN 54280 - Determination of acidity of wool Testing of textiles - determination of acidity of wool
DIN 54279 - Determination of the solubility of wool in urea/ bisulphite solution Testing of textiles - determination of the solubility of wool in urea/ bisulphite solution
DIN 54278-2 - Determination of condensation products splittable by means of hydrochloric acid Testing of textiles - coatings and attendant materials, determination of condensation products splittable by means of hydrochloric acid
DIN 54278-1 - Determination of materials soluble in organic solvents Testing of textiles - Coatings and attendant materials - Part 1: Determination of materials soluble in organic solvents
DIN 54231 - Detection of disperse dyestuffs Textiles - Detection of disperse dyestuffs (HPLC-DAD)
DIN 54221 - Hydrochloric acid method Testing of textiles - quantitative analysis of binary mixtures - polyamide 6 6 or polyamide 6 fibres with other fibres - hydrochloric acid method
DIN 54220 - Formic acid method Testing of textiles - quantitative analysis of binary mixtures - polyamide 6 6 or polyamide 6 fibres with other fibres - formic acid method
DIN 54217 - Dimethyl formamide method Testing of textiles - quantitative analysis of binary mixtures - acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres; dimethyl formamide method
DIN 54215 - Xylol method Testing of textiles - quantitative analysis of binary mixtures - polypropylene fibres with other fibres; xylol method
DIN 54211 - Dichlormethane (methylene chloride) method Testing of textiles - quantitative analysis of binary mixtures - triacetate fibres with other fibres - dichlormethane (methylene chloride) method
DIN 54210 - Acetone method Testing of textiles - quantitative analysis of binary mixtures - acetate fibres with other fibres - acetone method
DIN 54209 - Formic acid/ zinc chloride method Testing of textiles - quantitative analysis of binary mixtures - degummed mulberry silk with wool - formic acid/ zinc chloride method
DIN 54208 - Formic acid/ zinc chloride method Testing of textiles - quantitative analysis of binary mixtures - Regenerated cellulose fibres with other fibres, especially cotton - formic acid/ zinc chloride method
DIN 54206 - Hypochlorite method Testing of textiles - quantitative analysis of binary mixtures - protein fibres with fibres - hypochlorite method
DIN 54205 - Sulphuric acid method Testing of textiles - quantitative analysis of binary mixtures; natural or regenerated cellulose fibres with polyester fibres - sulphuric acid method
DIN 54204 - Potassium hydroxide solution method Testing of textiles - quantitative analysis of binary mixtures - wool with other fibres - potassium hydroxide solution method
DIN 54056-A - Colour fastness of dyeings and prints to sublimation in storage Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to sublimation in storage
DIN 54040 - Colour fastness of dyeings and prints to alkaline milling (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to alkaline milling (mild)
DIN 54034 - Hypochlorite (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to bleaching; hypochlorite (mild)
DIN 54016 - Colour fastness to washing in presence of hypochlorite Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in precense of hypochlorite
DIN 54015 - Colour fastness to washing in presence of peroxide Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in precense of peroxide
DIN 54005 - Colour fastness of dyeings and prints to water (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to water (mild)
DIN 53934 - Determination of the sliding resistance Testing of textiles - determination of the sliding resistance of woven fabrics to displacement
DIN 53931 - Resistance of textiles to mildew Testing of textiles - determination of the resistance of textiles to mildew; growth test
DIN 53924 - Determination of the velocity of soaking water Testing of textiles - velocity of soaking water of textile fabrics (method by determining the rising height)
DIN 53923 - Determination of water absorption Testing of textiles - determination of water absorption of textil fabrics
DIN 53894-2 - Determination of dimensional change Testing of textiles - determination of dimensional change of textile fabrics, steaming on ironing machines
DIN 53894-1 - Determination of dimensional change Testing of textiles - determination of dimensional change of textile fabrics obtained by ironing with a moist ironing cloth and a heated plate
DIN 53892-2 - Dimensional change Testing of textiles - determination of dimensional change of woven fabrics subjected to the repeated attack of moisture and dry air
DIN 53891-2 - Determination of crease resistance (wet) Testing of textiles - determination of crease resistance of textile fabrics by measuring the angle of recovery, method of vertical fold on the wet sample
DIN 53890 - Determination of crease resistance (dry) Testing of textiles - determination of crease resistance of textile fabrics by measuring the angle of recovery, method of horizontal fold and erected free limb on the dry sample
DIN 53867 - Determination of pilling (Random Tumble Pilling Tester) Testing of textile fabrics - determination of pilling with the Random-Tumble-Pilling-Tester
DIN 53866-3 - Shrinkage in hot air Testing of textiles - shrinkage of single and plied yarns - determination of shrinkage in hot air
DIN 53866-2 - Shrinkage in water Testing of textiles - shrinkage of single and plied yarns - determination of shrinkage in water
DIN 53864 - bending stiffness Testing of textiles - Determination of bending stiffness - A method according to Schlenker
DIN 53863-2 - Rotary abrasion test Testing of textiles - abraision test methods for textile fabrics - rotary abraision test
DIN 53860-1 - Elbow-test, static strain Testing of textiles - testing of the bulging tendency of textile fabrics - elbow-test, static strain
DIN 53859-5-A - Trapezoid test Testing of textiles - tear growth test on textile fabrics - trapezoid test
DIN 53856 - Determination of the mass portion of warp and weft Testing of textiles - Determination of the mass portion of warp and weft
DIN 53855-1 - Determination of thickness Testing of textiles - determination of the thickness of the textile fabrics (exept floor coverings) - apparent density over 0,05g/cm_
DIN 53852- crosswise - Determination of yarn length ratios Testing of textiles - determination of yarn length ratios in woven and knitted fabrics (cross direction)
DIN 53852 - lengthwise - Determination of yarn length ratios Testing of textiles - determination of yarn length ratios in woven and knitted fabrics (longitudinal direction)
DIN 53843-1 - Loop tensile test Testing of textiles - loop tensile test, yarns
DIN 53842-1 - Knot tensile test Testing of textiles - knot tensile test for single and plied yarns
DIN 53840-1 - Determination of curling, of characteristic curling and of mechanical curling resistance Testing of textiles - determination of curling, of characteristic curling and of mechanical curling resistance of textured filament yarns up to a linear density of 400dtex
DIN 53835-2 - Tensile test for testing the elastic behaviour (repeated tension stresses between constant elongation limits) Testing of textiles - tensile test for testing the elastic behaviour - single and plied yarns from elastofibres, repeated tension stresses between constant elongation limits
DIN 53835-14 - Testing the elastic behaviour (between two force limits) Testing of textiles - tensile test for testing the elastic behaviour - knitted fabrics, single strain between two force limits
DIN 53835-13 - Testing of the elastic behaviour (between constant elongation limits) Testing of textiles - testing of the elastic behaviour - textile fabrics, single tensile strain between constant elongation limits
DIN 53830-4 - Short length method Testing of textiles - determination of linear density of single and plied yarns - elasto-yarns including core spun yarns from elastofibres; short length method
DIN 53830-3 - Short length method Testing of textiles - determination of linear density of single and plied yarns; simple yarns and plied yarns, textured yarns; short length method
DIN 53817-2 - Capacitive test (Uster) Testing of textiles - determination of the unevenness of slivers and yarns; capacitive test
DIN 53814 - Determination of water retention power Testing of textiles - determination of water retention power of fibres and yarn cuttings
DIN 53811 - Determination of the diameter of fibres Testing of textiles - determination of the diameter of fibres from longitudinal view by microscope projection
DIN 53808-1 - Determination of length of fibres Testing of textiles - Determination of length of fibres by measuring of individual fibres
DIN 53800-2 - Determination of commercial mass and commercial linear density Textiles - Determination of commercial mass - Part 2: Determination of commercial mass and commercial linear density
DIN 53800-1 - Determination of dry mass by desiccation in hot air Textiles - Determination of commercial mass - Part 1: Determination of dry mass by desiccation in hot air
DIN 53765 (DSC) - Determination of melting behaviour Testing of plastics and elastomeres - Thermal analysis - DSC-method; Method B: determination of the melting behavior
DIN 53754 - Abrasion with the abrasion disk method Testing of Plastics - Determination of abrasion - abrasive disk method
DIN 53752/ ISO 11359-2 - Determination of the coefficient of linear thermal expansion Testing of plastics - Determination of the coefficient of linear thermal expansion
DIN 53728-3 - Determination of viscosity number Testing of plastics - determination of viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution
DIN 53715 - Water content by titration according to Karl Fischer Testing of plastics - determination of water content by titration according to Karl Fischer
DIN 53579-1 (at default indentation force) - Hardness (at default indentation force) Testing of flexible cellular material - hardness test on finished parts - indentation test on shaped parts (Indentation distancee at default indentation force)
DIN 53579-1 (at default indentation distance) - Hardness (at default indentation distance) Testing of flexible cellular material - hardness test on finished parts - indentation test on shaped parts (Indentation force at default indentation distance)
DIN 53579 (indentation force) - Hardness test (indentation force at defined indentation distance) Testing of flexible cellular material - Indentation test on finished parts (indentation force at defined indentation distance)
DIN 53579 (indentation distance) - Hardness (Indentation distance at defined indentation force) Testing of flexible cellular material - Indentation test on finished parts (Indentation distance at defined indentation force)
DIN 53577 - Stress-strain characteristics Determination of compression stress value and compression stress-strain characteristic for flexible cellular materials
DIN 53572 - Compression set Testing of soft-elastic foams - Determination of compression set after constant deformation
DIN 53530 - Separation test Testing of organic materials - Test for separating layers of laminated woven fabrics; JUST sheets
DIN 53528 - Abrasion test with the Frank Hauser apparatus Testing of rubber-coated textiles - abrasion test - determination of loss in mass by the Frank Hauser apparatus
DIN 53516 - Abrasion Testing of rubber and elastomers - determination of abrasion
DIN 53512 - Determination of rebound resilience Testing of Rubber - Determination of rebound resilience (Schob pendulum)
DIN 53509-1-B - Resistance to ozone cracking Testing of rubber - Determination of resistance to ozone cracking - Part 1: Static conditions; Method B (Determination of the length of time required for the first cracks to develop at a fiven strain)
DIN 53509-1-A - Resistance to ozone cracking Testing of rubber - Determination of resistance to ozone cracking - Part 1: static conditions; Method A (Assessment of cracking after exposure for a specified period at a given strain)
DIN 53508 - Accelerated ageing Testing of rubber - Accelerated ageing
DIN 53506 - Needle tear resistance Testing of rubber, Determination of needle tear resistance
DIN 53505-D - Determination of Shore D hardness Testing of rubber - Shore A and Shore D hardness test; Shore D
DIN 53505-A - Determination of Shore A hardness Testing of rubber, elastomers and plastics - Shore hardness testing A and D; Shore A
DIN 53504 - Tensile properties Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53504 (Temperature chamber - in heat) - tensile properties Testing of rubber - Determination of tear strength, tensile strength, elongation at break and stress values in a tensile test
DIN 53497-B - Heat storage test at constant temperature Testing of plastics - Heat storage test of moulded articles made of thermoplastic moulding materials without outside mechanical stress; Method B: constant temperature
DIN 53497-A - Heat storage test with constant storage period Testing of plastics - Heat storage test of moulded articles made of thermoplastic moulding materials without outside mechanical stress; Method A: constant storage period
DIN 53453 (notched impact resistance) - Impact resistance Testing of plastics - Determination of impact resistance
DIN 53453 (impact resistance) - Impact resistance Testing of plastics - Determination of impact resistance
DIN 53438-3 - Surface ignition Testing of combustible materials - reaction against a flame of a burner - Surface flame action
DIN 53438-2 - Edge ignition Testing of combustible materials - reaction against a flame of a burner - Edgeing flame action
DIN 53435-DS-K (Dynstat impact flexural test, notched) - Determination of impact resistance at dynstat test specimens, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (RT)
DIN 53435-DS-K (Dynstat impact flex. test, notched, -30°C) - Determination of impact resistance at dynstat test specimens at -30 °C, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (-30°C)
DIN 53435-DS-K (Dynstat impact flex. test, notched, -25°C) - Determination of impact resistance at dynstat test specimens at -25 °C, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (-25°C)
DIN 53435-DS-G (Dynstat impact flexural test, unnotched) - Determination of impact resistance at dynstat test specimens, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (RT)
DIN 53435-DS-G (Dynstat impact flex. test, unnotched, -30°C) - Determination of impact resistance at dynstat test specimens at -30 °C, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (-30°C)
DIN 53435-DS-G (Dynstat impact flex. test, unnotched, -25°C) - Determination of impact resistance at dynstat test specimens at -25 °C, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (-25°C)
DIN 53435-DB-G (Dynstat flexural test) - Determination of flexural properties with dynstat test specimens Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Flexural properties with dynstat test specimens
DIN 53430 - Tensile test Testing of rigid cellular plastics - tensile test
DIN 53428 - Behaviour when exposed to fluids, vapours and solids Testing of cellular materials - Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
DIN 53424 - Determination of dimensional stability under heat Testing of rigid cellular plastics - determination of dimensional stability under heat in the case of flexural load and compression load
DIN 53423 - Three-point bending test Test of rigid cellular plastics; bending test
DIN 53377 - Determination of dimensional stability Testing of plastic films - Determination of dimensional stability
DIN 53377 - Determination of Dimensional stability Testing of plastic films - Determination of dimensional stability
DIN 53373 - Impact penetration Testing of plastics - impact penetration test combined with data recording by means of electronic devices
DIN 53370 - Procedure P - Thickness Testing of plastic films - Determination of thickness by mechanical scanning
DIN 53370 - Method F - Thickness Testing of plastic films - Determination of thickness by mechanical scanning
DIN 53363 - Tear test using trapezoidal test specimen with incision Testing of plastics films - Tear test using trapezoidal test specimen with incision
DIN 53362 - Stiffness in bending (Method according to Cantilever) Testing of plastic films and textile fabrics (excluding nonwovens), coated or not coated with plastics - Determination of stiffness in bending - Method according to Cantilever
DIN 53360 - Determination of the static and permanent elongation Testing of artificial leather and similar sheet materials - Determination of the total elongation (statical elongation) and irreversible elongation
DIN 53359 - Flex cracking test Testing of artificial leather and similar sheet materials - Flex cracking test
DIN 53357-A - Adhesion test (method A) Testing of plastic sheets - Adhesion test (method A)
DIN 53356 - Tear growth test Testing of artificial leather and similar sheet materials - Tear growth test
DIN 53354 - Tensile test Testing of artificial leather - Tensile test
DIN 53351 - Permanent folding (Flexometer-method) Testing of artificial leather and similar shut materials - Behaviour at permanent folding (Fexometer-method)
DIN 53350 - Stiffness in bending (method according to Ohlsen) Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending; method according to Ohlsen
DIN 53333 - Determination of the water vapour permeability Testing of leather, artificial leather and textiles; determination of the water vapour permeability
DIN 53331 - Stitch tear resistance Testing of leather: Determination of the stitch tear resistance
DIN 53323 - Vaulting and bursting test Testing of leather - determination of the stress-strain behaviour during vaulting and bursting test
DIN 53295 - Drum peeling test Testing of core composites - Drum peeling test
DIN 53293 - Bending test Testing of core composites - bending test
DIN 53292 - Tension test in flatwise plane Testing of sandwiches; tension test in flatwise plane
DIN 53230 - Scheme for the evaluation of tests Testing of paints, varnishes and similar coating materials - Scheme for the evaluation of tests
DIN 53142-1 - Puncture test Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53122-1 - Determination of water vapour transmission Testing of plastic and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method
DIN 53121 - Bending stiffness by the beam method Testing of paper and board - Determination of the bending stiffness by the beam method
DIN 53119-2 - Determination of friction Testing of paper - Determination of friction - Part 2: Inclined plane method
DIN 53109 - Abrasion by the abrasion wheel method Testing of paper and board, Determination of abrasion by the abrasion wheel method
DIN 53100, Appendix F - Glacial acetic acid test Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastic materials - Appendix F: Glacial acetic acid test
DIN 53100 § 7.5 (appendix D) - Temperature cycling test Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials; § 7.5: Thermal cycle test (appendix D)
DIN 53019-1 - Viscosities (with rotations viscosimeter) Viscometry - Measurement of viscosities and flow curves by mean of rotational viscometers - Part 1: Principles and measuring geometry
DIN 52616 - Determination of thermal conductivity Heat Resistance Test - Determination of thermal conductivity with the heat flow meter apparatus
DIN 52351 § 2. - Determination water absorption and thickness swelling Testing of woodfiber plates - Determination of the humidity, water absorption and thickness swelling, § 2.: Determination water absorption and thickness swelling
DIN 52351 § 1. - Determination of the humidity Testing of woodfiber plates - Determination of the humidity, water absorption and thickness swelling, § 1.: Determination of the humidity
DIN 52350 - Determination of thickness, basis weight and density Testing of wood fiber boards - sampling, thickness measurement, determination of the basis weight and density
DIN 52182 - Determination of apparent density Testing of wood - Determination of density
DIN 51757, procedure 2 (hydrostatic weighing) - Density Testing of mineral oils and related materials; determination of density
DIN 51732-N Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen (here nitrogen) - Instrumental methods
DIN 51732 - Determination of total carbon, hydrogen and nitrogen Draft version: Testing of solid mineral fuels - determination of total carbon, hydrogen and nitrogen - instrumental methods
DIN 51724-1 Testing of solid fuels - Determination of sulfur content - Part 1: Total sulfur
DIN 51722-1 Testing of solid fuels - Determination of nitrogen content - semi-micro Kjeldahl method
DIN 51721 Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method
DIN 51718 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51558-2 Testing of mineral oils; determination of neutralization number; Color-indicator titration - insulatuing oils
DIN 51084-C (based on) - Determination of fluoride content Testing of oxidic raw materials for ceramic, glass an glazes - Determination of fluoride content (Procedure C)
DIN 51007 - Differential Thermal Analysis (DTA) Thermal Analysis - Differential Thermal Analysis - Principles
DIN 50958 - Modified Corrodkote corrosion test (mod. Corr-Test) Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)
DIN 50021-SS - Salt spray fog test Spray tests with different sodium chloride solutions (SS: Salt spray fog test)
DIN 50021-CASS - Copper chloride / acetic acid salt spray fog test Spray tests with different sodium chloride solutions (CASS: copper chloride / acetic acid salt spray fog test)
DIN 50018 - Testing in a saturated atmosphere in the presence of sulfur dioxide Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN 50018 - Condensation water alternating climate with sulfur dioxide-containing atmosphere Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN 50017-KTW - Condensation-water climate with alternating air temperature Climates and their technical application, condensated water containing climates with alternating temperatures
DIN 50017-KK - Condensation-water atmosphere with constant humidity Climates and their technical application, condensated water containing climates (constant climate)
DIN 50017-KFW - Condensation-water climate with alternating humidity and air temperature Climates and their technical application, condensated water containing climates with alternating humidity and temperature
DIN 40050-9 - Degree of protection (IP-code) of electrical equipment Road vehicles - degrees of protection (IP code) - protection against foreign objects, water and contact, electrical equipment
DIN 38407-F14, based on - Determination of phenoxy-alkane carboxylic acids German standard methods for the examination of water, waste water, and sludge - Jointly determinable substances ( group F ) part 14: Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrome-tric detection after solid - liquid
DIN 3761-14 - Pyrolysis-IR Rotary shaft lip type seals for automobils - Test - Infrared-spectroscopic analysis of elastomers
DIN 3419-1 - Determination of various strengths on slide fasteners Slide fasteners - Part 1: Technical delivery conditions
DIN 3415-1&2 - Textile touch and close fasterners Textile touch and close fasterners; requirements and test methods
DIN 30646: Self-adhesive signs - Technical delivery conditions for signs made of plastic film, aluminium foil and paper For all kinds of signs with adhesive coating, which are protected by a suitable paper or a suitable film.
DIN 19528 - Leaching of solid materials (percolation method)) Leaching of solid materials - Percolation method for the joint examination of inorganic and organic substances (quick colomn test)
DIN 18035-7 § 7.9 - Transverse tensile strength Sport grounds - Part 7: Synthetic turf areas; § 7.9: Determination of transverse tensile strength
DIN 18035-7 § 7.7.2 - Exposure to heat Sports grounds - Part 7: Synthetic turf areas; § 7.7.1: Exposure to heat
DIN 18035-7 § 7.7.1 - Exposure to hot water Sports grounds - Part 7: Synthetic turf areas; § 7.7.1: Exposure to hot water
Dimensional stability at tensile load Dimensional stability at tensile load; deformation, max; deformation,permanent
Dimensional stability at pressure load Dimensional stability at pressure load; deformation, max; deformation, permanent
Dimensional stability at applying temperature load Dimensional stability at applying temperature load; Deformation, max; Deformation, permanent
Dimensional analysis, wet chemistry (volumetry) Dimensional analysis, wet chemistry (volumetry)
Differential scanning calorimetry (DSC) / DIN EN ISO 11357 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
Determination of the pile height Textile - Determination of the pile height (manually - measurement with a steel ruler)
Determination of stiffness General method for the determination of the stiffness
Determination of static elongation
Determination of static and permanent elongation Determination of static and permanent elongation
Determination of operating forces Determination of operating forces
Determination of hardness / penetration depth (Ball indentation method) general method - Determination of hardness with Bauchometer MPE II
Determination of extractable components Determination of extractable components
Determination of density (volume test equipment) Determination of density (volume test equipment)
Density (immersion method) General method to determine the density (immersion method)
Decomposition by melting Decomposition by melting, various
DBL 9455: Supply Specification - Hot dip galvanized flat products
DBL 9441: Supply Specification - Surface protection for fasteners for direct screw connection in metal sheets ans plastic (non-metric threads) e.g. fasteners for direct screw connection in metal sheets ans plastic (non-metric threads)
DBL 9440: Fasteners with Metric Thread - Surface Protection and Supplementary TL / VDA 235-104: Cr(VI)-free surface of protection for Fasteners with Metric Thread. e.g. Fasteners with Metric Thread (internal and external)
DBL 9202: Decorative Parts in Vehicle Interiors Decorative Parts in Vehicle Interiors
DBL 9201: aluminum parts with anodic surfaces decorative interior and exterior parts of motor vehicles
DBL 9201: Aluminum parts with anodic oxide layers Decorative trim parts on the outside and inside of motor vehicles
DBL 9025: Supply specification - Noise capsules on engines
DBL 8465: Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings For functional parts and ornamental fittings in the interior or exterior of the vehicle.
DBL 8465: Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings For functional and ornamental parts in the interior or exterior of the vehicle.
DBL 8459: Supply Specification - Parts with nickel-, nickel-chromium or copper-nickel-chromium coatings
DBL 8451: Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materialsZT Parts with electrodeposited and aftertreated zinc and zinc alloy coatings
DBL 8451: Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materials for components manufactured from ferrous materials
DBL 8451: Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materials components manufactured from ferrous materials
DBL 8230: Supply Specification - Self-adhesive Labels For labels on tire pressure, trunk loading, characteristic data for engines and components, and others.
DBL 7906: Supply Specification - Self-adhesive components e.g. GPS-antennae, emblems, spoilers
DBL 7906: Supply Specification - Self-adhesive components PV 10: GPS-antennas, emblems, model plates, molding, A- and B-pillar trim covers, fender flares, spoilers etc. / PV 11: Antenna amplifiers / PV 20: Rain sensors, light sensors / AA 30: Door selas, sealing sections, roof joint strips
DBL 7906: Supply Specification - Self-Adhesive Components
DBL 7904: Supply Specification - Adhesive applications on components for assembly requirements For adhesive bonds on components
DBL 7904: Adhesive Bonds on Components For adhesive bonds on purchased parts (virtually stressfree bonding)
DBL 7403: Decorative coating of metallic interior components with plasma or vacuum deposition (e.g. PVD) Stainless steel components for the interior, see table 1., with an essentially decorative thin colored layer, coated by plasma or vacuum deposition (PVD, CVD, PACVD ...).
DBL 7403 § 7.3/ CEN/TS 1071-8:2004 - Determination of Rockwell hardness Decorative coating of metallic interior components with plasma or vacuum deposition (e.g. PVD) / Rockwell indentation testing of ceramic coatings
DBL 7402: Decorative coating of plastic parts by plasma or vacuum deposition Components made of plastic and equipped with a decorative coating, the significantly coloring layer of it is produced by a method of plasma or vacuum deposition
DBL 7392: Coating/Painting for Parts (moderate corrosion resistance) Finish paint (topcoat) for components that are exposed to hot and humid atmosphere. For mainly for components in the interior of vehicles.
DBL 7391: Supply Specification - Coating / Painting for Parts with High Corrosive Stress For coatings on the outer side and underside of vehicles and in the engine compartment. Finish coat (top coat) for components subject to high corrosive stress, and - if applicable - also mechanical stress.
DBL 7390 - Basecoat (primer) as basis for subsequent finish coats Product versions with light alloys as base material
DBL 7384: Supply Specification - Coating of plastic parts in vehicle interiors For coated plastic parts used in the interior of vehicles.
DBL 7384: Supply Specification - Coating of plastic parts in vehicle interiors For coated plastic parts used in the interior of vehicles.
DBL 7384: Supply Specification - Coating of plastic parts in vehicle interiors For coated plastic parts used in the interior of vehicles.
DBL 7382: Supply Specification - Coating of Metallic Parts in Vehicle Interiors For all metallic base materials in vehicle interiors which have been provided with an organic coating. Testing of the surface protection properties of the coating with regard to corrosion, mechanical properties and weather resistance.
DBL 7381: Supply Specification - Coating for major passenger car components/body panels and other functional parts with high corrosive stress Finish coat (top coat) for components subject to high corrosive stress, and - if applicable - also mechanical stress. This DBL applies to coatings on the outer side and underside of vehicles and in the engine compartment, not for vehicle interiors.
DBL 7381: Organic Coating for Metallic Parts on the Vehicle Exterior For all metallic base materials on the exterior and underside of the vehicle and within the engine compartment, as well as for the actual body, that receive an organic coating or paint.
DBL 7310: Supply Specification - Paints for brake disks For painted brake disks.
DBL 6269: Supply Specification, Hoses for windshield washer systems and headlight washer / wiper systems Hoses for windshield washer systems and headlight washer / wiper systems
DBL 6260: Supply Specification, hoses and lines for power steering and suspension systems High-pressure (HD), return and suction hose for power steering, automatic level control and Suspension Systems
DBL 6260: Supply Specification, hoses and lines for power steering and suspension systems High-pressure (HD), return and suction hose for power steering, automatic level control and Suspension Systems
DBL 6254: Coolant Hoses For materials In flexible connections conveying coolant, e.g. between radiator and engine or radiator and heating systems.
DBL 6038: O-Rings and Molded Seals Manufactured from Elastomers Elastomer materials for compression seals for static and axially moving seals in major assemblies
DBL 5972: Single-Layer Acoustic Insulating Materials single-layer plastic-film-based insulating materials (plastic films) such as e.g. flat and molded parts for damping airborne noise and/or structure-borne noise
DBL 5955 - Supply Specification Padding Upholstery wadding
DBL 5943: Fully Synthetic Twisted Yarns Fully synthetic twisted yarns (e.g. in seat covers for sewing in the vehicle interior and exterior areas
DBL 5943 - Supply Specification - Fully synthetictwisted yarn sewing Thread
DBL 5939 - Supply Specification Tapes e.g. head restraint slot binding
DBL 5937: Supply Specification - Tubular tricot tape For tubular tricot tape
DBL 5937 - Supply Specification - Tubular tricot tape Stitch tape on covers
DBL 5934: Rubber Bands, Cords and Fabric Tapes Rubber bands, fabric tapes and cords used in the vehicle interior
DBL 5934 - Supply specification - Rubber bands, cords and fabrics Rubber bands
DBL 5934 - Supply specification - Rubber bands, cords and fabrics Rubber bands
DBL 5934 - Rubber Bands, Cords and Fabric Tapes Rubber bands, fabric tapes and cords used in the vehicle interior
DBL 5920: Rubberized Hair Fabrics
DBL 5919: Supply Specification - Tricot tape Tricot tape
DBL 5917: Supply Specification - Touch and close fasteners
DBL 5912: Supply Specification - Straps and belts Straps and belts
DBL 5912: Supply Specification - Straps and Belts Straps and Belts
DBL 5912: Supply Specification - Straps and Belts e.g. for seat belts, tensioning straps, retaining straps
DBL 5912: Supply Specification - Straps and Belts e.g. for seat belts, tensioning straps, retaining straps
DBL 5911: Supply Specification Piping e.g. decorative seam edge or seam reinforcement for headrest covers, seat covers and central armrests
DBL 5884: Supply specifications - Woven Upholstery Fabric For woven upholstery fabric such as upholstery covers, seat cushion sides, seat center panels.
DBL 5884 - Supply Specification - Bolster material Seat cover BR W212
DBL 5883: Supply Specification - Synthetic Upholstery Fabric For synthetic upholstery fabrics for, for instance, door linings, door center panels, seat covers, headrests.
DBL 5882 - Supply Specification - Woven upholstery fabric Upholstery fabric
DBL 5881: Supply Specification - Synthetic Upholstery Fabric Synthetic Upholstery Fabric
DBL 5881 - Delivery Instructions synthetic fiber polyester fabric Upholstered fabric seat center section
DBL 5872: Textile Floor Coverings Textile floorings, e.g. velour or needle felt carpets
DBL 5869 - Supply Specification, Nonwoven fleece Fleece
DBL 5868: Supply Specification - Needlefelt Fabrics Needlefelt Fabrics
DBL 5868: Supply Specification - Needlefelt Fabrics Needlefelt Fabrics
DBL 5868: Supply Specification - Needlefelt Fabrics Needlefelt Fabrics
DBL 5868: Needlefelt Fabrics Needlefelt Fabrics
DBL 5868 A: Supply Specification - Needlefelt fabrics Flat needle-punched nonwoven, molded
DBL 5868 A: Supply Specification - Needlefelt fabrics Flat needle fleece
DBL 5867: Technical Fabrics
DBL 5867: Supply Specification Technical fabrics Technical fabrics
DBL 5867: Supply Specification - Technical Fabrics Technical fabric: polyamide
DBL 5867: Supply Spcification Technical Fabrics
DBL 5853: Velour carpet Velour carpet
DBL 5853: Supply Specification - Velour carpet Velour carpet
DBL 5853 - Supply Specification - Velour carpet shaped carpet
DBL 5818: Supply Specification Knitted Fabrics
DBL 5818 - Supply Specification Knitted Fabrics
DBL 5818 - Supply Specification Knitted Fabrics
DBL 5818 - Supply specification - Knitted fabrics
DBL 5818 - Supply specification - Knitted fabrics
DBL 5816: Supply specifications for microfiber nonwovens and microfiber fabrics Microfiber nonwoven and microfiber fabrics
DBL 5816: Supply Specification - Microfiber Nonwoven and Microfiber Fabric For microfiber nonwovens and microfiber fabrics.
DBL 5816: Supply Specification - Microfiber Nonwoven and Microfiber Fabric Microfaver nonwoven and microfiber fabrics
DBL 5816: Supply Specification - Microfiber Nonwoven For microfiber nonwovens
DBL 5814: Supply Specification Air bag Air bag
DBL 5809: Supply Specification - Knitted Fabrics For knitted fabrics e.g. for paneling, seat covers, inner headliners, draft stops.
DBL 5809: Supply Specification - Knitted fabrics e.g. knits for cladding parts, seat covers, headliner, windbreak.
DBL 5809 - Supply Specification knitted Fabrics knitted Fabrics
DBL 5809 - Supply Specification - knits knits
DBL 5809 - Delivery Instructions crocheted crocheted, hard
DBL 5805 - Supply Specification, Reverse Side Laminating Material Reverse Side Laminating Material for leather
DBL 5768: Compression molded fibrous materials
DBL 5768: Compression molded fibrous materials Compression molded fibrous materials in the vehicle interior
DBL 5765: Supply Specification - Wood fibre hardboards For reinforcements for interior trim parts, e.g. reinforcement door centre panel, load compartment cover, reinforcement sliding roof.
DBL 5620: Organic glass for lighting equipment
DBL 5610: Supply Specification - Safety windows for vehicle glazing Product versions 00 to 23: Windshields (WS) / Product versions 30 to 97: Rear (RW), side and roof windows
DBL 5587: Elastomer Materials for Components in Motor Vehicles
DBL 5578: Supply Specification - Elastomer parts with anti-friction coating Elastomer parts with anti-friction coating
DBL 5578: Supply Specification - Elastomer parts with anti-friction coating For elastomer parts with anti-friction coatings, e.g. static seal, lower door edge seal, door seal, channel seal, convertible seals.
DBL 5578: Elastomer parts with anti-friction coating Elastomer parts with anti-friction coating such as sealing profiles and moldings (foam rubber / soft rubber) in the interior and exterior body area, which are chemically and thermally low to moderate claimed
DBL 5578, Tab. 2, 4.12.4 / LV 28 (Kalahari-Modus) - Resistance to weathering, dry-hot climate, e.g. Kalahari, Arizona, South America Supply specification - Elastomer parts with anti-friction coating; Table 2, 4.12.4: Artificial weathering - Exterior application - Kalahari-Modus
DBL 5578, Tab. 2, 4.12.4 / LV 28 (Florida-Modus) - Resistance to weathering (humidity-warm climate, e.g. Florida) Supply specification - Elastomer parts with anti-friction coating; Table 2, 4.12.4: Artificial weathering - Exterior application - Florida-Modus
DBL 5575: Supply Specification, fibre flocculated elastomere parts for body sealing AA 10 / 20 / 21 / 40: fibre flocculated elastomere parts (e. g. window guide rails, dust shield seals) AA22: fibre flocculated plastic parts (z. Bsp. stowage compartment, armrest, glove compartment)
DBL 5574: Supply Specification, Moldings and hoses manufactured from cellular rubber (pored elastomers with closed cells) Only for parts with restricted sealing effect and/or insulating properties (up to 85°C), for the interior and exterior body area
DBL 5574: Molded Parts Made from Cellular Rubber Semi-Finished Product For parts with a sealing effect and/or insulating properties ins tatic applications for the interior and exterior. Forming is done e.g. by means of cutting or punching semi-finished products.
DBL 5573: Supply Specification, Moldings and extrusions manufactured from sponge rubber (foamed elastomers with open an closed cell structure) e.g. fixed sponge rubber parts, seals in vehicle interior
DBL 5573: Extrusions manufactured from foamed elastomers (sponge rubber) Body seals manufactured from sponge rubber for vehicle interior and exterior
DBL 5572: Single and multilayer floor mats single and multi layer floor mats in passenger compartments
DBL 5571:Supply Specification, Sealing Sections / Molded Parts Manufactured from Elastomers, Mainly in Body Area Sutiable for Continuous Thermal Loads of 70°C to Short-Term Thermal Loads of 100°C e.g. Fixed seals such as shims, gaskets, cup seals
DBL 5571: Profile Sections and Molded Parts Made from Elastomers (EPDM) in the Body Area Statically and dynamically stressed, non-foamed sealing sections and/or molded parts made of elastomers predominantly used in the body area in the interior and exterior
DBL 5571: Delivery Instructions, rubber profiles / moldings made of elastomers, mainly in the car body area - thermally claimable from 70 ° C (endurable) to 100 ° C for (short-term)
DBL 5568: Supply Specification Elastomer parts heat-tolerant to 150 to 250 ° C, moderately resistant to petroleum-based products seals, regulators in tank ventilating valves, charge-air hose
DBL 5562: Supply Specification, Thermoplastic Elastomers (TPE) Thermoplastic Elastomers (TPE)
DBL 5562: Supply Specification - Thermoplastic Elastomers (TPE) Thermoplastic elastomers
DBL 5562: Components Manufactured from Thermoplastic Elastomers For components manufactured from thermoplastic elastomers in motor vehicles with an elasticity modulus < 500 MPa.
DBL 5559: Supply Specification, Parts manufactured thermoplastic polyurethane elastomers (TPU) Temperature application range up to 120 °C e.g. Cups, dust caps, sealing elements
DBL 5558: Elastomer parts subject to high and extremely high mechanical-dynamic stress, with temperature application range up to 100 °C bearing elements wihout acoustic requirements, torsion bar bearing, torque strut bearing, sub-frame bearing, transmission bearing, suspension turret web, crankshaft vibration damper, bearing elements with hydraulic damping system, such as transverse link
DBL 5558: Elastomeric parts for mechanical and dynamic high and maximum load, thermally stable up to 100 ° C claimable
DBL 5557 - Elastomer Parts Subject to Mechanical-Dynamic Stress, with Temperature Application Range up to 200 °C Absorbers and vibration dampers such as engine mounts, torsional vibration dampers, propeller shaft intermediate bearings and absorbers in vehicles
DBL 5556: Molded Elastomer Parts Subject to Normal Mechanical Stress Molded elastomer parts with general requirements for components in vehicles <= 3,5 t and vehicles > 3,5 t such as grommets, plugs and molded hoses with low to moderate chemical and thermal stress
DBL 5556: delivery specifications, elastomer moldings with normal mechanical requirements Elastomer moldings with normal mechanical requirements without constant exposure to fuel or oil
DBL 5555: Finished Parts and Semi-Finished Products Made of Organic Polymer Materials General Conditions and Test Methods Specifications governing the general technical conditions of supply between Daimler AG and its supplying partners for the quality assurance of materials used in finished parts and semifinished products made of organic polymer materials. These shall includ
DBL 5555: Finished Parts and Semi-Finished Products Made of Organic Polymer Materials / General Conditions and Test Methods technical conditions of supply for the quality assurance of materials used in finished parts and semifinished products made of organic polymer materials. These shall include plastics (thermoset plastics and thermoplastics), thermoplastic elastomers (TPE),
DBL 5490: Specification - Plastic parts made of recycled materials For plastic components which consist to a large extent from recycled material that has been recovered from used old parts.
DBL 5485 - Supply Specification - Direct-laminated linings for vehicle interiors (Back compression/In-mold decoration) Direct-laminated linings for vehicle interiors and trunks, manufactured using the Back compression/In-mold decoration
DBL 5481: Extruded, thermoformable plastic sheets plastic sheets
DBL 5474: Supply Specification, Multi-Layer Composite Film for Interior Equipment Sensor Systems Multi-Layer Composite Film for Interior Equipment Sensor Systems
DBL 5474: Supply Specification - Multi-Layer Composite Film for Interior Equipment Sensor Systems For multi-layer composite film for vehicle interiors.
DBL 5474: Supply Specification - Multi layer composite film for interior equipment sensor systems For multi-layer composite film for vehicle interiors
DBL 5474: Multi-Layer Composite Film for Interior Equipment Sensor Systems For multi-layer composite film for vehicle interiors.
DBL 5472: Supply Specification, Substrate material in sandwich design Substrate material in sandwich design, e.g. molded headlining, Sliding roof lining, Lining luggage compartment floor, Roof reinforcement insulation
DBL 5472: Off-tool composite components Components made from fiberglass or cellulose reinforcements with thermoplastic or reactive matrix systems, e.g. molded ceiling, sliding roof lining, lining of luggage compartment floor, roof reinforcement insulation, parcel shelf
DBL 5472 - Substrate in Sandwich Design Components made from fiberglass or cellulose reinforcements with thermoplastic or reactive matrix systems, e.g. molded ceiling, sliding roof lining, lining of luggage compartment floor, roof reinforcement insulation, parcel shelf
DBL 5471: Verkleidungs- und Formpolsterteile für Fahrzeuginnenräume (Verbundteile) Verkleidungs- und Formpolsterteile für Fahrzeuginnenräume (Verbundteile)
DBL 5471 (Template WEB V 214 / DBL 5471 supplement 1): Trim and molded padded parts for vehicle interiors (composite parts)
DBL 5468: Supply Specification-Polyurethane integral structural foam for interior design parts Polyurethane integral structural foam for interior design parts
DBL 5468: Polyurethane Integral Foam for Interior Trim Parts
DBL 5463: Light multi-layer sound insulations for internal and external applications Light multi-layer sound insulations for internal and external applications. As acoustic parts for internal and external vehicle compartments.
DBL 5462: Supply Specification - Molded Rigid and Semi-Rigid Foams For molded rigid and semi-rigid foams. eg. Center field side airbag, instrument panel foam backing
DBL 5461 - Supply Specification - Parts manufactured from energy-absorbing foams for exteriors energy-absorbing foams for exteriors
DBL 5460 - Supply Specification - Parts manufactured from energy-absorbing foams for interiors energy-absorbing foams
DBL 5460 - Supply Specification - Parts manufactured from energy-absorbing foams for interiors energy-absorbing foams
DBL 5459: Supply Specification Parts Manufactured from Reaction Injection Molded Polyurethane (PUR-RIM) for Exterior Applications on Body/Cab Parts Manufactured from Reaction Injection Molded Polyurethane (PUR-RIM) for Exterior Applications on Body/Cab
DBL 5456: Supply Specification - Composite foam blocks for interior applications Composite foam blocks made from high-grade PUR foam flakes produced in molding tools with binding agent
DBL 5456: Supply Specification - Composite foam blocks for interior applications Composite foam blocks made from PUR foam flakes in block molds with binding agent. E.g. as damping material for passenger cars, commercial vehicles and buses as insert or reinforcement in seats; as insulation A-pillar, B-pillar
DBL 5456: Composite Foam Blocks for Interior Applications Composite foam blocks made from high-grade PUR foam flakes and produced in block molds resp. molding tools with binding agent - e.g. damping material for passenger cars, commercial vehicles and buses, reinforcement in seats, damping for A-pilalr, B-pillar
DBL 5455: Supply Specification - Polyolefin foam Polyolefin foam eg. for antisqueak, shielding and sealing material.
DBL 5455: Polyolefin foam Antisqueak and sealing materials
DBL 5454 - Supply Specification Covered Foam Upholstery top layers
DBL 5454 - Covered Foam Upholstery
DBL 5453: Substrate Made of Reinforced Polyurethane Foam Substrate Made of Reinforced Polyurethane Foam
DBL 5452: Supply Specification - Foam-molded flexible cellular polyurethane-based materials Flexible, predominantly open-cell polyurethane foams on polyether basis produced as moldings / Molded padded parts e.g. seat backrests etc.
DBL 5452: Supply Specification - Foam-molded flexible cellular polyurethane-based materials Flexible, predominantly open-cell polyurethane foams on polyether basis produced as moldings / Molded padded parts e.g. seat backrests etc.
DBL 5450: Supply Specifications- Foamed Flexible Polyurethane-Based Cellular Plastics Foamed Flexible Polyurethane-Based Cellular Plastics
DBL 5450: Supply Specifications- Foamed Flexible Polyurethane-Based Cellular Plastics Foamed Flexible Polyurethane-Based Cellular Plastics
DBL 5430: Emissions and odor in the interior For materials and components that can come into contact with the vehicle interior air directly or indirectly.
DBL 5425: Supply specification - Coating / paintwork of plastic parts in the vehicle exterior For plastic parts in the vehicle exterior coated / painted in vehicle color / contrast.
DBL 5423: Foamed Thermoplastic Parts (Injection Molding) For injection molded and physically or chemically foamed components consisting of thermoplastics.
DBL 5423: Foamed Thermoplastic Parts (Injection Molding) For injection molded and physically or chemically foamed components consisting of thermoplastics.
DBL 5422: Supply Specification Glass Encapsulation e.g. windshileds, fixed triangular windows, sliding roofs (adhesively bonded, molded or cast sections)
DBL 5420: Delivery Instructions - plastic insulating parts for electric low voltage range e.g. Insulator for lamp base, bobbin
DBL 5418: Supply Specification - Injection Molded Parts Manufactured from Fiber Reinforced Thermoplastics for Structural Requirements For components manufactured from fiber reinforced thermoplastics with increased mechanical strength and rigidity requirements in order to fully exploit the lightweight design potential.
DBL 5417: Supply Specification, Molded Parts Manufactured from Long-Fiber-Reinforced Thermoplastics, Hot Pressed For all long-fiber-reinforced thermoplastics processed by compression molding and impact extrusion (flow molding). (Attention: This DBL 5417 shall not apply to identical materials processed by injection molding. DBL 5418 shall be applied for these.)
DBL 5416 (Requirements on the material): Supply Specification - Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5416 (Requirements on the material): Supply Specification - Parts manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications Parts manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5416 (Requirements for the coating): Supply Specification - Parts Manufactured from Thermoplastics Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5416 (Requirements for the coating): Supply Specification - Parts Manufactured from Thermoplastics Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications
DBL 5413: Supply Specification, Plastic sections manufactured from plasticized PVC and ABS-PVC e.g. Profile cords, cover strips, binding sections
DBL 5412: Supply-Specification - Plastic moldings manufactured from plasticized PVC Plastic moldings manufactured from plasticized PVC
DBL 5411: Plastic Surfaces for Trim Parts on the Vehicle Exterior Exterior components made of plastic or a plastic/metal composite with graines, high-gloss, and/or painted surface such as water deflectors and waistline trim strips, as well as for surfaces with hot-stamped film
DBL 5411: Plastic Surfaces for Trim Parts on the Vehicle Exterior Exterior components made of plastic or a plastic/metal composite with graines, high-gloss, and/or painted surface such as water deflectors and waistline trim strips, as well as for surfaces with hot-stamped film
DBL 5410: Supply Specification - Thermoplastic parts for control elements, bearing elements, fasteners, and spacers Thermoplastic parts for control elements, bearing elements, fasteners, and spacers
DBL 5409: Plastic Parts in the Engine Oil Area For plastics in contact with engine oil within the framework of component development and quality assurance (polyamide-containing components).
DBL 5408: Thermoplastic parts for engine air management For thermoplastics for use in engine air management.
DBL 5408: Thermoplastic parts for engine air management e.g. Raw air line, air intake
DBL 5408: Thermoplastic parts for engine air management
DBL 5408: Thermoplastic Parts for Engine Air Management For thermoplastics for use in engine air management.
DBL 5406: Supply Specification - Parts manufactured from thermoplastics in the coolant circuit e.g. Radiator tank, pump housing
DBL 5405: Supply Specification Parts Manufactured from Thermoplastics in the Fuel System
DBL 5404: Parts of thermoplastic materials for the direct and indirect area of the passenger compartment, passenger compartment heating, cabin ventilation, cladding and housing For parts made from thermoplastics of the direct and indirect area of the vehicle interior, the air intake and heating.
DBL 5404: Parts of thermoplastic materials for the direct and indirect area of the passenger compartment, passenger compartment heating, cabin ventilation, cladding and housing For parts made from thermoplastics of the direct and indirect area of the vehicle interior, the air intake and heating.
DBL 5403: Funktional Parts made of thermoplastic materials for engine and subassembly-related applications For thermoplastics for use in engine components.
DBL 5401:Delivery Instructions - parts from duroplastic materials in the engine and aggregate area duroplastic materials
DBL 5400: Supply specification - Components made from glass-fibre reinforced thermosets For parts manufactured from glass-reinforced thermosetting plastics such as sound encapsulation, paneling, SMC parts.
DBL 5381: Supply specification Molded skins (spray and powder-cast skins) made of TPU, Polyolefine and PVC
DBL 5381: Molded skins (spray and powder-cast skins) made of TPU, Thermoplastics and PVC
DBL 5353: Supply Specification Foam Films and Sheeting Plastic films and sheetting made with foamed materials (foam films and sheeting)
DBL 5352: Supply Specification Deep-Drawn Sheeting Deep-drawn sheeting, e.g. for instrument panels
DBL 5348: Supply Specification - Foamed and Compact Artificial Leather For foamed and compact artificial leather.
DBL 5348: Supply Specification - Foamed and Compact Artificial Leather for foamed and compact artificial leather
DBL 5348 - Supply Specification Foamed and Compact Artificial Leather Foamed and Compact Artificial Leather
DBL 5348 - Supply specification - Foamed and compact artificial leather Foamed and compact artificial leather
DBL 53333 - Supply Specification Films and sheets e.g. vehicle document wallets
DBL 5333 - Supply Specification - Films and sheets as wear protection on Euro velours, for all model series
DBL 5330 - Supply Specification - Woven artificial leather cloth Woven artificial leather cloth, e.g. Ski bag
DBL 5327: Textiles, Flat Fabrics, Weaving Processes For woven upholstery fabrics and flat fabrics for use in vehicle interiors.
DBL 5327: Supply Specification for Textiles, Flat Fabrics, Weaving Processes For woven upholstery fabrics and flat fabrics for use in vehicle interiors.
DBL 5326: Flat Textile Fabrics, Stitch Production Processes Circular Knitting, Knitting (Wirken) For textile decor (decorative knitted fabrics and flat fabrics) in the vehicle interior
DBL 5311 - Supply Specification Leather Leather, e.g. for key fobs, vehicle document wallets
DBL 5310: Supply Specification - Leather for interior equipment For leather in the interior equipment area.
DBL 5310: Supply Specification - Leather for Interior Equipment Leather for Interior Equipment
DBL 5310: Supply Specification - Leather for interior equipment For leather in the interior equipment area.
DBL 5310: Supply Specification - Leather for interior equipment For leather in the interior equipment area.
DBL 5310 § 7.27 - Color stability Leather for interior equipment, § 7.27 Color stability for sun-reflective leather versions
DBL 5310 § 7.11 - Color stability Leather for interior - Color stability
DBL 5307 § 6.1: Supply Specification Flame retardant properties - § 6.1: Test for determination of the horizontal burning rate of materials All interior trim materials of passenger cars, multipurpose passenger cars, commercial vehicles and buses. For buses with more than 22 seats; additional seat accessories, linings of side and rear panels, materials with a thermal and/or acoustic function,
DBL 5307 § 5.1: Supply Specification Flame retardant properties - § 5.1: Test for determination of the horizontal burning rate of materials All interior trim materials of passenger cars, multipurpose passenger cars, commercial vehicles and buses. For buses with more than 22 seats; additionally seat accessories, linings of side and rear panels, materials with a thermal and/or acoustic function
DBL 4093: Body Parts Manufactured from Press-Hardened Steel Sheets Body Parts Manufactured from Press-Hardened Steel Sheets
Damage analysis Damage analysis
DaimlerChrysler LP-463DB-12-01 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging Resistance of Interior Materials
Daimler, optical surface measurement - Measurement of Instrument panel in the area of the airbag weakening MB - Measurement of Instrument panel in the area of the airbag weakening
Daimler Test Instructions EP / AIS: Test Instructions Seats
Daimler Specification: Soiling / Cleaning on Interior Parts/ Interior Materials
Daimler QEV 111AFFHJ6: Technical Component Requirement Specifications - Rear Shelf Paneling ZB Rear Shelf Paneling
Daimler PV EP/AIS § 7.4.1 - Sun simulation (long term test) Test standard seats - environmental situation; § 7.4.1: Sun simulation
Daimler PBODC390 - Scratch resistance of coatings with Crockmeter Determination of the scratch resistance of coatings with Crockmeter
Daimler PBODC 371 - Resistance to chemicals Daimler: Resistance to chemicals
Daimler PB VWT 217 - Corrosion test Corrosion testing of vehicle interior trim - Test instruction
Daimler PB VWL 323 - Determination of the abrasion resistance of the pile Determination of the abrasion resistance of the pile - Test instruction
Daimler PB VWL 301 - Abrasion test with metal heels Abrasion test with metal heels
Daimler PAPP PWT 7329 - Colour change in defined amine atmosphere Colour change of automotive interior material in defined amine atmosphere
Daimler PAPP PWT 7301 - Abrasion test with a steel heel Abrasion test with a steel heel
Daimler PA PP PWT 7333 Method B - Heating behavior of materials Heating behavior of materials
Daimler PA PP PWT 7328 - Resistance against sunscreen Resistance of interior materials against sunscreen
Daimler PA PP PWT 3668 - Static shearing force Determination of the static shearing force of bonded components
Daimler PA PP PWT 3668 - Static shearing force Determination of the static shearing force at bonded components
Daimler PA PP PWT 3640 (without sample preparation) - Tensile shear strength Determination of the tensile shear strength of single-shear overlapped bonding (tensile shear test in accordance with DIN EN 1465)
Daimler MS-JP-9-4 - Flammability in condition as delivered Flammability testing of interior materials
Daimler MBN 55555-7 § 5.4 - Resistance to care agents Non-metallic materials, material systems and semifinished products Part 7: Resistance tests
Daimler MBN 55555-7 § 5.3 - Resistance to sun cream through contact Non-metallic materials, material systems and semifinished products Part 7: Resistance tests § 5.3 Resistance to sund cream test substance through contact
Daimler MBN 55555-7 § 5.2 - Resistance against suncream Non-metallic materials, material systems and semifinished products Part 7: Resistance tests § 5.2 Abrasion resistance to sun cream test substance
Daimler MBN 55555-7 § 5.1 - Color changes in defined amine atmosphere Non-metallic materials, material systems and semifinished products Part 7: resistance tests § 5.1 Color changes of materials in defined amine atmosphere
Daimler MBN 55555-6 § 5.8 - Abrasion resistance Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.8 Abrasion resistance with the crockmeter (friction fabric) Method A
Daimler MBN 55555-6 § 5.6 - Abrasion test with metal heels Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.6 Chafe teyst with steel heels
Daimler MBN 55555-6 § 5.26 - Foam adhesion Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.26 Foam adhesion at interface between foam and substrate
Daimler MBN 55555-6 § 5.24 (based on DIN EN 1372) - Peel test for decorative goods (roller peel test) Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.24 Peel test for decorative goods
Daimler MBN 55555-6 § 5.2 - Scratch resistance with a chisel Non-metallic materials, material systems and semi-finished products Part 6: mechanical tests § 5.2 scratching of surface using a chisel
Daimler MBN 55555-6 § 5.17 - Cold resistance - ball drop test Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.17 Ball drop test
Daimler MBN 55555-5 § 5.1 (VDA 230-219-D) - Sun simulation component (long term testing) Non-metallic materials, material systems and semifinished products - Part 5: Weathering Tests § 5.1: Sun simulation component
Daimler MBN 55555-4 § 5.7 KP - Low-temperature test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.7 low-temperature test (KP)
Daimler MBN 55555-4 § 5.6 KL - Climate test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.6 Climate test (KL)
Daimler MBN 55555-4 § 5.5 WA - Thermal aging test Non-metallic materials, material systems and semifinished products part 4: Thermal tests § 5.5 Thermal aging test (WA)
Daimler MBN 55555-4 § 5.4 WCC / natural skin leather test - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.4 warm climate cycle test (WCC) / Natural skin leather test
Daimler MBN 55555-4 § 5.3 WCC / dimensional change test - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.3 Warm climate cycle test (WCC) / dimensional change test
Daimler MBN 55555-4 § 5.2 WCC / Quick feed - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.2 Warm climate cycle test (WCC) / Quick feed
Daimler MBN 55555-4 § 5.1 WCC - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.1Warm climate cycle test (WCC)
Daimler MBN 55555-3 § 5.9 - Measurement of Instrument panel in the area of the passenger airbag Non-metallic materials, material systems and semifinished products Part 3: other tests § 5.9 Measurement of Instrument panel in the area of the passenger airbag
Daimler MBN 55555-3 § 5.2: Cleanability following soiling For interior equipment materials on individual materials and compound component parts such as instrument panels, leather, plastics, and textiles.
Daimler MBN 55555-3 § 5.1 - Heat resistance - Loose exposure Non-metallic materials, material systems and semifinished products Part 3: Other tests § 5.1 Heat resistance - loose exposure
Daimler MBN 15306-5 § 5.2: Cleanability following soiling
Daimler MBN 15306-5 § 5.1 - Heat resistance - Loose exposure Test methods for material systems and components - Part 5: Other tests § 5.1 Heat resistance - loose exposure
Daimler MBN 15306-3 § 5.19 - Cold resistance - ball drop test Test methods for material systems and components - Part 3: Mechanical tests § 5.19 Cold resistance - ball drop test
Daimler MBN 15306-1 § 5.6 - Low-temperature test Test methods for material systems and components - Part 1: Thermal tests § 5.6 low-temperature test
Daimler MBN 15306-1 § 5.5 - Climate test Test Methods for material systems and components - part : Thermal tests§ 5.5 Climate test
Daimler MBN 15306-1 § 5.4 - Thermal aging Test methods for material systems and components - Part 1: Thermal tests § 5.4 Thermal aging test
Daimler MBN 15306-1 § 5.3 dimensional change test - Warm climate cycle test Test methods for material systems and components - Part 1: Thermal tests § 5.3 warm climate cycle test / dimensional change test
Daimler MBN 15306-1 § 5.2 quick feed - Warm climate cycle test Test methods for material systems and components - Part 1: Thermal tests § 5.2 warm climate cycle test / quick feed
Daimler MBN 15306-1 § 5.1 - Warm climate cycle test Test methods for material systems and components - part 1: Thermal tests § 5.1 warm climate cycle test
Daimler MBN 10526 § 6.4 - Shear holding time Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.3 - Shear holding time Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.3 - Peel-off resistance Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.2 - Shear holding time Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.2 - Peel-off resistance Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.1 - Peel-off resistance Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10522: Verification of the Bondability of Metallic Substrates, Coatings, Surface Pre-Treatment Agents and Oils for Body Shell Applications Tests that shall be completed to verify the bondability of metallic substrates, coatings, surface pre-treatment agents, rolling mill oils, and forming lubricants for body shell applications.
Daimler MBN 10522: Verification of the Bondability of Metallic Substrates, Coatings, Surface Pre-Treatment Agents and Oils for Body Shell Applications Tests that shall be completed to verify the bondability of metallic substrates, coatings, surface pre-treatment agents, rolling mill oils, and forming lubricants for body shell applications.
Daimler MBN 10518 § 6.7 (based on DIN EN ISO 9142 - cyclical aging) - Alternating hot climate aging Test Specifications for Ensuring the Adhesion of Assembly Bonds, § 6.7 Alternating hot climate aging
Daimler MBN 10506 (Kalahari-Mode) - Weathering in Dry and Hot Climates Non-Metallic Materials - Weathering in Dry and Hot Climates
Daimler MBN 10505 (Florida-Mode) - Weathering in a Humid Climate Non-Metallic Materials - Weathering in a Humid Climate
Daimler MBN 10494-8 § 5.4 - Compatibility test after aging of the assembly and transport protection Paint Test Methods - Part 8: Adhesion of Adhesives on the Coating
Daimler MBN 10494-7 § 5.1 - Resistance to chemicals: Temperature-gradient oven test method Resistance to chemicals
Daimler MBN 10494-6 § 5.8.2 - Weathering in central European climate Paint Test Methods - Part 6: Climatic Tests; § 5.8.2 Resistance to weathering - Weathering in central European climate (Outdoor weathering)
Daimler MBN 10494-6 § 5.8.1 - Resistance to weathering - Florida test Paint Test Methods - Part 6: Climatic Tests - Resistance to weathering - Florida test
Daimler MBN 10494-5: Paint Test Methods - Part 5: Technical-Mechanical Tests
Daimler MBN 10494-5 § 5.9 - Mar resistance according to Oesterle Paint Test Methods - Part 5: Technical-Mechanical Tests § 5.9
Daimler MBN 10494-5 § 5.8.2 - Wiping scratch resistance: crockmeter test Testing the scratch resistance of coatings with the crockmeter
Daimler MBN 10494-5 § 5.8.2 - Wiping scratch resistance: crockmeter test Testing the scratch resistance of coatings with the crockmeter
Daimler MBN 10494-5 § 5.8.1 - Car-wash scratch resistance Paint Test Methods - Part 5: Technical-Mechanical Tests; § 5.8.1 Car-wash scratch resistance: Amtec Kistler test
Daimler MBN 10494-5 § 5.2.1 - Stone-chip resistance (Multi-impact test, method B) Paint Test Methods - Part 5: Technical-Mechanical Tests, § 5.2.1 Multi-impact test, method B
Daimler MBN 10494-5 § 5.1.2 - Adhesion test with additional adhesive tape pull-off Paint test Methods - Part 5: Technical-mechanical tests § 5.1.2 Adhesion test with additional adhesive tape pull-off
Daimler MBN 10494-5 § 5.1.1 - Manual scratch test (with a knife) Paint test methods - Part 5: Technical-mechanical tests
Daimler MBN 10494-4 § 5.1 - Gloss measurement using a reflectometer Paint test methods - Part 4: Optical tests § 5.1 Gloss measurement using a reflectometer
Daimler KLH QEV111AF4KQP § 2.1.7.1.4.7.4 - Rest Flock testing Daimler Technology Component Specifications Instrument Panel (I-Panel) with Glove Box (HSK) QEV111AF4KQP § 2.1.7.1.4.7.4
Daimler KLH A 205 000 67 99: Technic-components specification paneling roof as assembly/ W 205 / 212101-01 VU Panel roof assembly
Daimler FuVo RD/KIA 10 - Trunk compartment trim Trunk compartment trim
Daimler FuVo RD/KIA 08 - Function specification - Parcel shelf Parcel shelf
Daimler FuVo A 210 720 00 00: Function Specification Door Paneling Assembly Door Paneling Assembly
Daimler FuVo A 210 720 00 00: Function Specification Door Panel Assembly Door Panel Assembly
Daimler FuVo A 210 720 00 00: Function Specification Door Panel Assembly Door Panel Assembly
Daimler FuVo A 207 001 30 99: function specification for Exterior Trim Parts for Exterior Trim Parts
Daimler FuVo A 203 740 02 00: Function Specification Interior trim rear door Interior trim rear door
Daimler FuVo A 170 680 01 00: Function Specification Instrument Panel Assembly Instrument Panel Assembly
Daimler FuVo A 003 005 79 99: Function Specification - Windshield Windshield (assembly)
Daimler FuVo A 002 000 04 99: Functional Specification interior trim of the Load room Interior trim of the Load room
Daimler FuVo A 001 006 01 99: Function Specification - Center console Center console
Daimler FuVo A 001 006 00 99: Function Specification Instrument Panel Assembly Instrument Panel Assembly
Daimler FuVo A 001 001 81 99: Functional Specification Trunk compartment trim Trunk compartment trim
Daimler FuVo A 000 885 00 00: Function Specification - Assembly-Bumper Assembly-Bumper
Daimler FuVo A 000 880 00 00: Functional Instructions - Assembly Radiator paneling Assembly Radiator paneling
Daimler FuVo A 000 002 68 99: Functional Instructions Wheel Arch Trim / Wheel Spoiler Wheel arch trim / wheel spoiler
Daimler FuVo A 000 002 08 99: Function specification - Roof racking retaining rail Roof racking retaining rail
Daimler Function Specification Center Console with Cupholder RD/KIC, version V10
Daimler DBL 9202 § 4.1.9 - Resistance tests Supply Specification - Decorative parts in vehicle interiors; § 4.1.9: Resistance tests (Resistance to cleaning/care products)
Daimler DBL 9202 § 4.1.3 - Climatic storage Supply Specification - Decorative parts in vehicle interiors; § 4.1.3: Climatic storage
Daimler DBL 9202 § 4.1.2 - Temperature cycling Supply Specification - Decorative parts in vehicle interiors; § 4.1.2: Temperature cycling
Daimler DBL 9202 § 4.1.1 - High-temperature storage Supply Specification - Decorative parts in vehicle interiors; § 4.1.1: High- temperature storage
Daimler DBL 9202 § 3.5 - Adhesion test (adhesive tape method) Supply Specification - Decorative parts in vehicle interiors; § 3.5: Adhesion test (adhesive tape method)
Daimler DBL 9202 (Draft) § 7.19 - Resistance to stress cracking on the component Supply Specification - Decorative parts in vehicle interiors; § 7.19: Resistance to stress cracking on the component
Daimler DBL 9202 (Draft) § 7.15 - Resistance to cosmetics Supply Specification - Decorative parts in vehicle interiors; § 7.15: Resistance to cosmetics
Daimler DBL 9202 (Draft) § 7.14 - Resistance to care products Supply Specification - Decorative parts in vehicle interiors; § 7.14: Resistance to care products
Daimler DBL 7401, Table 2, § 1.2, 2.2 and 2.4 - Visual comparison of color, luster and haze with color template Color, luster and haze
Daimler DBL 7399 § 7.5.2 - Florida test Supply specification - Enamels, paints and similar coating materials and associated coatings; § 7.5.2 Weather resistance - Florida test
Daimler DBL 7399 § 7.5.1 - Weathering in central European climate Supply specification - Enamels, paints and similar coating materials and associated coatings; § 7.5.1 Weather resistance - Weathering in central European climate
Daimler DBL 7399 § 6.1 - Visual comparision of gloss according to standard samples Supply specification - Enamels, paints and similar coating materials and associated coatings; § 6.1: Visual comparision of gloss according to standard samples
Daimler DBL 7399 § 5.1 - Scratching with knife Supply specification - Enamels, paints and similar coating materials and associated coatings; § 5.1: Scratching with knife
Daimler DBL 7392 § 5.7 - Evaluation of degree of rusting, edge corrosion Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.7 - Evaluation of degree of rusting, edge corrosion
Daimler DBL 7392 § 5.5 - Evaluation of degree of rusting, surface corrosion Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.5 - Evaluation of degree of rusting, surface corrosion
Daimler DBL 7392 § 5.4 - Subsurface corrosion around a scribe Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.4 - Corrosion creep around a scribe
Daimler DBL 7392 § 5.2 - Scratching with knife Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.2: Scratching with a knife
Daimler DBL 7384 - Outdoor weathering - Florida weathering Supply Specification - Coating of Plastic Parts in Vehicle Interiors Weathering (Florida test - Outdoor weathering)
Daimler DBL 7382 § 9.7 - Scratch test with knife Supply specification - Coating of metallic parts in vehicle interiors; § 9.7: Scratch test with knife
Daimler DBL 7382 § 9.16 - Subsurface corrosion around a scribe Supply specification - Coating of metallic parts in vehicle interiors: § 9.16: Subsurface corrosion around a scribe
Daimler DBL 7382 § 9.14 - Evaluation of corrosion grade, edge corrosion Supply specification - Coating of metallic parts in vehicle interiors: § 9.14: Evaluation of corrosion grade, edge corrosion
Daimler DBL 7382 § 9.13 - Evaluation of corrosion grade, surface corrosion Supply specification - Coating of metallic parts in vehicle interiors: § 9.13: Evaluation of corrosion grade, surface corrosion
Daimler DBL 5578, Tab. 2, 4.11 (profile edge) - Abrasion test over profile edge Supply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion test over profile edge
Daimler DBL 5578, Tab. 2, 4.11 (crockmeter) - Abrasion test, crockmeter Supply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion test, crockmeter
Daimler DBL 5578 § 8 / § 8.2 (profile edge) - Abrasion test over profile edge Elastomer parts with anti-friction coating - § 8: Abrasion test using a crockmeter / § 8.2: Abrasion on profile edge
Daimler DBL 5578 § 8 / § 8.1 (crockmeter) - Abrasion test, crockmeter Elastomer parts with anti-friction coating - § 8: Abrasion test using a crockmeter / § 8.1: Abrasion on wetted rubbing fabric
Daimler DBL 5578 (Steam jet test) - Coating adhesion after Steam jet test Supply Specification - Elastomer parts with anti-friction coating: Steam jet test
Daimler DBL 5575 § 6.5.1 - Abrasion resistance (Crockmeter) Supply specification, Textile flocked elastomer parts for body sealants and plastic parts for the vehicle interior, § 6.5.1 Abrasion resistance (Crockmeter)
Daimler DBL 5575 § 10.2 - Abrasion resistance (Crockmeter) Supply specification, Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior, § 10.2 Abrasion resistance (Crockmeter) (for AA 22)
Daimler DBL 5575 § 10.1 - Abrasion resistance (Crockmeter) Supply specification, Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior, § 10.1 Abrasion resistance (Crockmeter) (for AA 10 / 20 / 21)
Daimler DBL 5555-II-6.4 - Steam jet test DC, Steam jet test
Daimler DBL 5555-II-6.2 (based on DIN EN ISO 4892) - Artificial weathering Supply specification - Finished parts and semi-finished products made of organic polymer materials; § 6.2: artificial weathering (based on DIN EN ISO 4892)
Daimler DBL 5527 - Prevention of galvanic corrosion Supply Specification - Elastomer materials with reduced conductivity (to avoid contact corrosion )
Daimler DBL 5471(AA90-95) § 4.11 - Resistance to abrasion (DIN EN ISO 105-X12) Supply specification - trim panels and molded padded parts for vehicle interiors (compound parts); § 4.11 - Resistance to abrasion (DIN EN ISO 105-X12)
Daimler DBL 5404-4.1 (based on DIN EN ISO 22088-3) - Stress cracking Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 4.1: Stress cracking (based on DIN EN ISO 22088-3 Part 3: Bent strip method)
Daimler DBL 5404 § 7.15 - Resistance to care agents Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 7.15: Resistance to care agents
Daimler DBL 5404 § 7.14 - Resistance to cosmetics Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 7.14: Resistance to cosmetics
Daimler DBL 5404 § 4.2 - Resistance to care products Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 4.2: Resistance to care products
Daimler DBL 5404 § 18.7 - Scratch resistance Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 18.7: Scratch resistance, followed by colour measurement
Daimler DBL 5399 § 3.3 + 3.4 - Soiling and Cleaning behaviour Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.3 and § 3.4: Soiling and cleanability behaviour
Daimler DBL 5399 § 3.3 + 3.4 (Martindale) - Soiling and Cleaning behaviour Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.3 and § 3.4: Soiling and cleanability behaviour (Martindale)
Daimler DBL 5399 § 3.2 - Resistance to cleaning and care products Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.2: Resistance to cleaning and care products
Daimler DBL 5307 § 6.1 - Flame retardant properties Supply specification - flame retardant properties - Interior trim parts - requirements and test specifications; § 6.1: Test for determination of the horizontal burning rae of materials
Daimler DBL 5307 § 5.1 - Flame retardant properties Supply Specification - Flame retardant properties - Interior trim parts - Requirements and test specifications; § 5.1: Test for determination of the horizontal burning rate of materials
Daimler DBL 5306 § 9.4 - Cleaning behaviour Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 9.4: Cleaning behaviour
Daimler DBL 5306 § 9.3 - Soiling behaviour (Martindale method, standard soiling material) Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 9.3: Soiling behaviour (Martindale method)
Daimler DBL 5306 § 8.2 - Permanent deformation - wet method General technical delivery conditions and test methods for interior equipment materials and similar products; § 8.2: Permanent deformation after constant load
Daimler DBL 5306 § 8.1 - Permanent deformation after constant load - dry method Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 8.1: Permanent deformation after constant load - dry method
Daimler DBL 5306 § 7.3 - Cold resistance - ball drop test Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 7.3: Cold resistance - ball drop test
Daimler DBL 5306 § 7.2 - Cold resistance - bending exposure Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 7.2: Cold resistance - bending exposure
Daimler DBL 5306 § 7.1 - Cold resistance - folded exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 7.1: Cold resistance - folded exposure
Daimler DBL 5306 § 6.2 - Heat resistance - folded exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 6.2: Heat resistance - folded exposure
Daimler DBL 5306 § 6.1 - Heat resistance - Loose exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 6.1: Heat resistance - Loose exposure
Daimler DBL 5306 § 4.1 (DIN EN ISO 105-X12) - Abrasion resistance General technical delivery conditions and test methods for interior equipment materials and similar products; § 4.1: Abrasion resistance
Daimler DBL 5306 § 3.2 - Exposure to scratching with a chisel General technical delivery conditions and test methods for interior equipment materials and similar products; § 3.2: Exposure to scratching with a chisel
Daimler DBL 5306 § 3.1 - Resistance to scratching (with fingernail) General technical delivery conditions and test methods for interior equipment materials and similar products; § 3.1: scratch resistance (fingernail or knife blade)
Daimler DBL 5306 § 26.1.4 - Shear tensile test under heat General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.4: Shear tensile test under heat
Daimler DBL 5306 § 26.1.3 - Shear tensile test in standard atmosphere General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.3: Shear tensile test in standard atmosphere
Daimler DBL 5306 § 26.1.1 - Peel adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.1: Peel tensile test in standard atmosphere
Daimler DBL 5306 § 25 - Tear-out resistance General technical delivery conditions and test methods for interior equipment materials and similar products; § 25: Tear out resistance; Stitch tear resistance (§ 25.1) or selvege thread pull-out resistance (§ 25.2)
Daimler DBL 5306 § 20 - Contact staining General technical delivery conditions and test methods for interior equipment materials and similar products; § 20: Contact staining
Daimler DBL 5306 § 2 - Resistance to blocking General technical delivery conditions and test methods for interior equipment materials and similar products; § 2: Resistance to blocking
Daimler DBL 5306 § 19.3 - Coefficient of friction with sliding/sticking friction General technical delivery conditions and test methods for interior equipment materials and similar products; § 19.3: Coefficient of friction with sliding/sticking friction
Daimler DBL 5306 § 16 - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 16 (manually) - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 16 (machine) - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 15.2 - Grip indentation measurement General technical delivery conditions and test methods for interior equipment materials and similar products; § 15.2: Grip indentation measurement
Daimler DBL 5306 § 1.1 - Bending stiffness General technical delivery conditions and test methods for interior equipment materials and similar products; § 1: bending stiffness
Daimler DBL 4952: Aluminum Surfaces for Body Shell Joining Processes For the approval of aluminum surface pretreatments with respect to the joining methods used.
Daimler AG PAPP PWT 7517 - Determination of nitrosamine emission Measuring the emission of nitrosamines from elastomeric parts used in the passenger compartment
Daimler A21.10.01, § 4.6 - Tread resistance Standard function test program - Flooring / function, § 4.6 Tread resistance
DAF MAT 46811/46812: Thermoforming Interior Parts Thermoforming products used as dashboards, instrument panels, strips, framing, sky boxes etc., which may be exposed to direct sunlight (temperatures from -32 °C to + 85 °C, peak temperature of 100 °C, 10 % to 95 % RH)
DAF MAT 46811/46812 Hardness - Determination of hardness Thermoforming interior parts - hardness
DAF LAK 61025/61029: Paint treatment of plastic interior parts Painted plastic interior parts
DAF KEUR 00824-849: Resistance of coats of paint to attack by fluids (Drop Test) Resistance of coats of paint, or paint systems, to brief attack by automotive fluids.
DAF KEUR 00824-825 - Resistance to perspiration Parts and components - Determination of the resistance to attack by perspiration
DAF KEUR 00824-818 - Resistance to test media Resistance to environmental influences, resistance to momentary attacks by automotive fluids. (Drip, cotton wool, or immersion test)
DAF KEUR 00824-401 - Cross-cut test Determination of the adhesion of coats of paint on painted parts (cross-cut test)
DAF KEUR 00824-101 - Gloss measurement Measurement of the gloss
DAF KEUR 00822-120 - Determination of the fogging Determination of the fogging of plastics (reflectometric)
DAF KEUR 00822-116 - Resistance to wear (Taber) Covering materials - Determination of the resistance to wear
DAF KEUR 00822-113 - Shrinkage by moisture Covering materials - Determination of the shrinkage caused by the influence of moisture
DAF KEUR 00822-108 - Colour fastness to rubbing Covering materials - Determination of the colour fastness to rubbing
DAF KEUR 00822-104 - Determination of the tearing strength Covering Materials - Determination of the tearing strength
DAF KEUR 00821-027 - Mar resistance Determining the scratch resistance of various surfaces
DAF KEUR 00821-024 - Resistance to rotting (Fungoid growth) Fungoid growth on interior panels
D41 1286 - Reißfestigkeit
Curling Curling
Cross-cut (X cut) Cross-cut (X cut)
Crease Flex - Ravel Resistance Crease Flex; Ravel Resistance
CQAC Topcoat paint Exterior § 11.15 (Draft) - Xylene Double Rubs Test CQAC Topcoat paint specifications for exterior body parts
Corrosion creep (based on DIN EN ISO 4628-8) - Assessment of degree of delamination and corrosion around a scribe Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (infiltration)
Contact discoloration (by foam) Contact discoloration (by foam), e.g. BMW QV 52009
Contact angle measurement Contact angle measurement
Compression set (acc. to drawing) Compression set (acc. to drawing)
Colour transfer by rubbing (Gakushin) General test method - Colour transfer by rubbing with Gakushin type friction tester (eg. Nissan NES M0602 § 24)
Colour matching, visual Colour matching, visual
Colour fastness to rubbing (Gakushin) General test method - Colour fastness to rubbing with Gakushin type friction tester (eg. Nissan NES M0602 § 21 and 22)
Colour fastness to artificial light
Cold storage Cold storage
Cold behaviour Cold behaviour
Coefficient of friction (sticking/sliding friction) Determination of the coefficient of friction (sticking/sliding friction)
CMVSS 302 - Burning behaviour Flammability of interior materials
Climate test / climate storage Climate test / climate storage
Climate test / climate cycle Climate test / climate cycle
Climate cycle with infrared irradiation climate cycle with infared irridiation
Cleaning behaviour Cleaning behaviour
Cleaning Cleaning (for example for out-door weathering)
Cleanability resistance textiles based on DBL 5399 Resistance of textiles to cleaning agents (based on DBL 5399.30)
Cigarette Test Cigarette Test (e.g. BMW PR 388)
Chrysler/Fiat Group MS-DC-643(S): Thermoplastic or thermoset rubber - Floor covering materials Thermoplastic or thermoset rubber - Floor covering materials
Chrysler PF-7051-F: Part Supplier - Paint Continuous Conformance (CC) Test Reuqirements, including PPAP, PSO- and FOREVER Requirements
Chrysler PF-10938 (Scratch) - Scratch Resistance Scratch and Mar - Resistance of Molded-In-Color Plastic Components
Chrysler PF-10938 (Mar) - Mar Resistance Scratch and Mar - Resistance of Molded-In-Color Plastic Components
Chrysler PF-10243: Decorative Interior Wood Components e.g. door trim panels, instrument panels, steering wheels
Chrysler MS-PD-48-1: Paint - Multi-Purpose For Interior Parts - Solvent or Waterborne
Chrysler MS-DC642 - Plastics - Thermoplastics - Filled Polyethylene - Sound Barrier Applications Highly filled, calendared, polyethylene based material
Chrysler MS-DC259 - Thermoplastic - Calendared Ethylene Vinyl Acetate (EVA) for Sound Barrier Applications Calendared, moldable EVA
Chrysler LP-463PB-31-01-K (Interior) - Air freshener resistance Resistance of paint films to various fluids; Method K: Air freshener resistance
Chrysler LP-463PB-31-01-K (Interior) - Air freshener resistance Resistance to various fluids; Method K: Air freshener resistance
Chrysler LP-463PB-31-01-J (Exterior/ Interior/ Underhood) - Solvent wipe resistance Resistance to various fluids, Method J - Solvent wipe resistance
Chrysler LP-463PB-31-01-J (Exterior/ Interior) - Solvent wipe resistance Resistance of paint films to various fluids, Method J - Solvent wipe resistance
Chrysler LP-463PB-31-01-H (Exterior/ Interior/ Underhood) - Acid Spot Test Resistance to various fluids, Method H: Acid spot test
Chrysler LP-463PB-31-01-H (Exterior/ Interior) - Acid Spot Test Resistance of paint films to various fluids, Method H: Acid spot test
Chrysler LP-463PB-31-01-F (Exterior/ Interior) - Water and soap spot test (Method F) Resistance of paint films to various fluids; Method F: Water and soap spot test
Chrysler LP-463PB-31-01-F (Exterior/ Interior) - Water and soap spot test (Method F) Resistance to various fluids; Method F: Water and soap spot test
Chrysler LP-463PB-31-01-D (Interior) - Suntan lotion test (Method D) Resistance of paint films to various fluids; Method D: Suntan lotion test
Chrysler LP-463PB-31-01-D (Interior) - Suntan lotion test (Method D) Resistance to various fluids; Method D: Suntan lotion test
Chrysler LP-463PB-31-01-B (Interior) - Spot test (Method B) Resistance of paint films to various fluids; Method B: Spot test
Chrysler LP-463PB-31-01-B (Interior) - Spot test (Method B) Resistance to various fluids; Method B: Spot test
Chrysler LP-463PB-31-01 - Resistance to various fluids Resistance of paint films to various fluids
Chrysler LP-463PB-22-01 - Cycle testing Cycle testing of painted surfaces
Chrysler LP-463PB-22-01 - Cycle testing Cycle testing of painted surfaces
Chrysler LP-463PB-07-01 - Solvent wipe resistance test Solvent wipe resistance test
Chrysler LP-463LB-13-01 - Heat Aging Leather - Physical testing, Heat aging of Trim material
Chrysler LP-463LB-12-01-B - Humidity, hot and cold cycling Resistance to humidity hot and cold cycling of trim materials test, Method B
Chrysler LP-463LB-11-01 Method B - Resistance to cold cracking (Mandrel bend test) Resistance to cold cracking of general trim materials, Method C: Ball drop test
Chrysler LP-463LB-11-01 Method A - Resistance to cold cracking (180° bend and crease test) Resistance to cold cracking of general trim materials, Method A : 108° bend and crease test
Chrysler LP-463LB-10-01-A - Bond strength Bond strength of trim materials
Chrysler LP-463KC-21-01 - Perspiration Resistance Perspiration Resistance
Chrysler LP-463KC-04-01 §3A - General cleanability Cleanability and soilability tests - § 3A: General cleanability of trim materials
Chrysler LP-463KB-21-01 - Wear Resistance (Taber Method) Wear resistance of trim materials - Taber Method
Chrysler LP-463DD-18-01 (Scratch) - Scratch Resistance Scratch Resistance of automotive plastics
Chrysler LP-463DD-18-01 (Mar) - Mar Resistance Mar Resistance of automotive plastics
China GB 8410 - Burning behaviour Flammability of Automotive Interior Materials
Charpy impact strength - Determination of Charpy impact properties General method
Change of dimension Change of dimension after customer requirements
Chamber emission test (by arrangement) Emission test with air change in the test chamber; Determination of volatile organic substances
BWM AA-0055: Chemical resistance test of surfaces This work instruction describes the test media and methods used in the chemical resistance test
BWM AA-0055: Chemical resistance test of surfaces
Buckling stress / crease test Buckling stress
BS 1006 - Waterdrop test Color fastness to spotting: water
Brose BN 591165-101 part 1 - Flammability Flammability of interior materials
Brasilien Res. CONTRAN 675 - Burning behaviour Regulations for materials which are used for lining the interior of vehicles and other provisions - Burning behaviour of interior materials
Bow and skew measurement Standard test method for Bow and Skew in woven and knitted fabric - general method
Bonded coating adhesion General method for determination of the bonded coating adhesion on elastomer seals by means of elongation on a universal testing device
BMW-Net, Total elongation at climate (based on DIN 53360) - Static and permanent elongation (climate cycle test) Determination of the total elongation at climatic cycle test (statical elongation) and permanent elongation at room temperature / required for example in TL 9192340.6, § 3.3.3
BMW-Net, Total elongation (based on DIN 53360) - Static and permanent elongation Determination of the total elongation (statical elongation) and permanent elongation / required for example in TL 9192340.6, § 3.3.3
BMW TS 100.1 § 4.2 - Decor adhesion Test specification; § 4.2: Decor adhesion
BMW TLS/pecs 7 120 399.6: Upholstery wadding '02 Upholstery wadding for the interior trim
BMW TL/Specs 9 221 359.6: Tufting-Carpet velvet velours light Tufting-carpet for the interior trim - Delivery conditions and quality for planar initial materials in as-delivered condition and, in part, for finished parts as well
BMW TL/Specs 9 221 359.6: Tufting-Carpet velvet velours light Tufting-carpet for the interior trim - Delivery conditions and quality for planar initial materials in as-delivered condition and, in part, for finished parts as well
BMW TL/Specs 9 211 895.6: Technical Delivery Specification - Sound insulation light weight non woven (PP/PET) Light weight non woven for the interior trim
BMW TL/Specs 9 211 895.6: Technical Delivery Specification - Sound insulation light weight non woven (PP/PET) Light weight non woven for the interior trim
BMW TL/Specs 9 199 920.6: PVC imitation leather 13 PVC imitation leather
BMW TL/Specs 9 165 280.6: PVC Imitation leather 11 PVC imitation leather
BMW TL/Specs 8 171 142.6 - Pull rope Pull ropes for the interior trim, for planar initial materials in as-delivered condition and, in part, for finished parts as well
BMW TL/Specs 7 478 493.6: Sound insulation air conduct light weight non woven for the interior trim
BMW TL/Specs 7 411 853.6: Specs PVC-Imitation leather optimized haptics grain Verona PVC-Imitation leather optimized haptics for the interior trim
BMW TL/Specs 7 382 291.6: PVC Imitation leather 17 PVC imitation leather
BMW TL/Specs 7 340 490.6: Compression moulded material 10 Compression moulded material for the interior trim
BMW TL/Specs 7 289 355.6: Renewable Vegetable For Visible Carrier Materials Renewable vegetable raw materials for the interior trim
BMW TL/Specs 6 958 374.6: Technical Delivery Specification non-woven non-woven and non-woven insert for the exterior trim
BMW TL/Spec's 8 116 999.6: Technical Delivery Specification Flock Flock for the interior trim
BMW TL 9 211 895.6: Technical Delivery Specification - Sound insulation light weight non woven (PP/PET) For light weight non woven for the interior trim.
BMW TL 9 210 275.6: Spec's PVC Imitation leather 14 Grain 60 PVC Imitation leather
BMW TL 9 192 340.6: Specs Luggage net PP Luggage nets for the interior trim
BMW TL 9 169 300.6: Spec's Leather all Leather for the interior trim
BMW TL 9 169 300.6: Leather all Leather for the interior trim
BMW TL 9 149 156.6: Specs PP-Glass fibre recyclat Rear shelf material for the interior trim
BMW TL 8 262 216.6 - Specs Ski Bags Material Ski Bag Material
BMW TL 8 236 276.6: Luggage net PA Luggage net for interioor trim
BMW TL 8 186 875.4 - Specs Knitted Band knitted Band for the interior trim
BMW TL 8 165 341.6: Carpet footwell mat 1 Carpet footwell mat for the interior trim
BMW TL 8 127 520.6: Spec Sun-Protective knitted fabric Sun-protective knitted fabric for the interior trim
BMW TL 8 127 520.6 - Specs Sun-Protective knitted fabric Sun-Protective knitted fabric
BMW TL 8 127 520.6 - Specs Sun-Protective knitted fabric Sun-protective knitted fabric for the interior trim
BMW TL 8 127 520.6 - Specification - Sun-Protective knitted fabric Sun-Protective knitted fabric
BMW TL 8 121 649.6: Spec's Safety net Safety nets for the interior trim
BMW TL 8 090 463: Specs Knitted Trim Fabric Tacheny Knitted trim fabric for Headlining, Pillar cover, Parcel shelf
BMW TL 7117860.6: Spec's Flat needle non-woven 3 for Decor flat needle non-woven for interior trim
BMW TL 7117860.6: Flat needle non woven 3 for Decor flat needle non woven for interior trim
BMW TL 7 458 357.6: Specification PUR imitation leather optimized haptics, Grain 80
BMW TL 7 458 356.6: Specification PVC-Imitation leather light quality, Grain Ray PVC-Imitation leather
BMW TL 7 458 355.6: Specification PVC-Imitation leather, standard quality Grain Ray PVC-Imitation leather
BMW TL 7 453 047.6: Spec's Shear dilour high trunk For Non-woven velours the interior (Trunk)
BMW TL 7 422 824.6: Specs PVC-Imitation leather 22, standard quality Grain 80 PVC-Imitation leather
BMW TL 7 422 824.6: Specs PVC-Imitation leather 22, standard quality Grain 80 PVC-Imitation leather
BMW TL 7 411 705.6: Specs TPO-Foam with grain "Verona" (80) For TPO-Foam sheet for the interior trim. For sheet in as-delivered condition and, in part, for laminated components as well.
BMW TL 7 411 703.6: Specs PVC-Foam sheet grain "Verona" (80) For PVC-Foam sheet for the interior trim. For sheet in as-delivered condition and, in part, for laminated components as well.
BMW TL 7 402 630.6: Specs PVC-Imitation leather 18 light quality, Grain 80 PVC-Imitation leather
BMW TL 7 402 630.6: Specs PVC-Imitation leather 18 light quality, Grain 80 PVC-Imitation leather
BMW TL 7 402 630.6: Specs PVC-Imitation leather 18 light quality, Grain 80 Specs PVC-Imitation leather 18 light quality, Grain 80
BMW TL 7 378 491: Spec's knitted trim fabric - Boston Knitted trim fabric, e.g. headlining, parcel shelf, pillars, sun visor
BMW TL 7 334 912.6: Specs PUR Imitation Leather 1 PUR imitation leather for interior trim
BMW TL 7 311 282.6: Tufting-Carpet Velvet velours hight Tufting-carpet for the interior trim - Delivery conditions and quality for planar initial materials in as-delivered condition and, in part, for finished parts as well
BMW TL 7 305 243.6: Specs Shear dilour trunk 12 For Non-woven velours the interior
BMW TL 7 305 243.6: Specs Shear dilour trunk For Non-woven velours the interior
BMW TL 7 302 281.6: Specs - Allweather Floormat Allweather Floormats for cars
BMW TL 7 150 150.6 - Tufting Carpet Eurovelours 91 Tufting Carpet
BMW TL 7 145 612.6 -Specs Tufting -Carpet 2003
BMW TL 7 117 860.6: Spec's Flat needle non-woven 3 for Decor flat needle non-woven for interior trim
BMW TL 7 069 008.6: Specs PVC Imitation Leather for Bellows
BMW TL 7 065 938.6: Spec's Distance knit fabrics
BMW TL 7 056 938.6: Specs Attachement Strip For attachement strip for the interior trim.
BMW TL 7 044 213.4 - Specs ABS+PC Recyclat e.g. Support Center Console, Reinforcement Door Pocket
BMW TL 7 028 459.6 - Specs Elastic band 2 (textile) elastic bands for the interior trim
BMW TL 6 961 179.6: Specs Sound Insulation Light Weicht Non Woven Fibre fleece for the interior trim
BMW TL 6 951 680.6 - Tufting-Carpet Eurovelours 70 Tufting-Carpet
BMW TL 1 932 797.6: Spec's Webbing Webbing for the interior trim
BMW TL 1 932 797.6 - Specs Webbing Specs Webbing
BMW TL 1 848 495.6: Specs Fibre Fleece Sound Insulation For fibre fleece for the interior trim.
BMW TL 1 848 495.6: Spec's Fibre MF fleece for sound insulation and thermal insulation Fibre fleece for the interior trim
BMW Specs 8 165 341.6 - Carpet footwell mat 1 Carpet footwell mat for the interior trim
BMW Specs 2 754 531.6 - Carpet footwell mat 2 Carpet footwell mat for the interior trim
BMW Specs 2 754 531.6 - Carpet footwell mat 2 Carpet footwell mat for the interior trim
BMW S 60300.0 Teil 4, § 3.11 (based on DIN 53428-F) - Water absorption Soft foams - Test method and acceptable tolerances; § 3.11: Water absorption (based on DIN 53 428 F: Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials)
BMW S 603 00.0 Part 4: Soft cellular materials - Test procedure and allowable tolerances For flexible cellular materials and / or components