imat-uve

Service specifications

Here you find all test methods, standards and test specifications with which we are able to process your individual orders. Anything missing? Send us an email.

Search

Title Description
Molit Notification No. 2019-144 - Determination of organic emissions Control standard for in - car air quality for new motor vehicles
Modified oil staining test for Leather Modified oil staining test for Leather
Mitsubishi ES-X83252 - VOC measuring method of interior materials VOC measuring method of interior materials
Mitsubishi ES-X83244: Standard Test Method - Molded Plastics (For Exterior Parts) plastic parts for exterior applications
Mitsubishi ES-X83239: Standard Test Methods - Interior Plastic Parts
Mitsubishi ES-X83239 § 4.20 - Wear resistance, plane surfaces Standard test methods - Interior plastic parts § 4.20 Wear resistance
Mitsubishi ES-X83239 § 4.14 - Light resistance Standard test methods - Interior plastic parts § 4.14 Xenon arc fading lamp test
Mitsubishi ES-X83238: Standard Test Method - Plastics Elastomer for Exterior RIM and R-RIM urethane, olefine based thermoplastic elastomers, modified polypropylene for exterior parts
Mitsubishi ES-X83238 § 3.8 - Heat sag Standard test method - Plastics elastomer for exterior; § 3.8: Heat sag
Mitsubishi ES-X83220 § 4.14.1A - Light Resistance Test Standard - Woven Fabrics, Knittings - Light Resistance (Xenon Arc Lamp)
Mitsubishi ES-X83220 § 4.10 - Shift Strength Test standard - Woven fabrics, knittings; § 4.10: Shift strength
Mitsubishi ES-X83217 § 4.28 - Seam fatigue resistance Test standard - Polyvinyl chloride coated - Fabrics and polyvinyl chloride sheet - interior & exterior; § 4.28: Seam fatigue resistance
Mitsubishi ES-X63129: Paint Film - For Flexible Thermoplastic Parts
Mitsubishi ES-X63129 § 4.18 - Wear resistance (crockmeter) Paint Film - For Flexible Thermoplastic Parts, § 4.18 Wear resistance
Mitsubishi ES-X60410 - Flammability Flammability of interior materials
Mitsubishi ES-X60210: Plastic Parts - For Interior Trim
Mitsubishi ES-W83217/ ES-X83217 § 4.12.2 - Carbon arc light resistance Fabrics and Sheets - Fade Resistance - Method B
Mitsubishi - Odor - Odor test
Misuse Test Misuse Test
Mildew resistance - Storage in a desiccator Mildew resistance - General test method - Storage in a desiccator with water
Mikrotomschnitt
Migration staining Migration staining
Microscopy Microscopy
Microscopical analysis, procedure after Stratmann Textiles: microscopical analysis, procedure after Stratmann
Method book BGK e.V. (RG) Self heating / grade of decompose
Meteorological data; sampling Meteorological data at sampling
Melting temperature (VW, DSC) - Determination of melting behaviour (DSC) Melting temperature by DSC (dynamic scanning calorimetry)
McLaren MSL.10.23.0007: Paint Performance, Durability & Application Testing Requirements for exterior paint
McLaren MSL.03.05.0012: Lower Trim specification Lower Trim in the interior compartment
McLaren MSL.03.05.0011: Tunnel Console Test Specification Tunnel console in the interior compartment
McLaren MSL.03.05.0004: Facia Test Specification Instrument Panel Assembly / For facia and facia console in the interior compartment.
McLaren MSL.03.05.0004: Facia Test Specification Instrument Panel Assembly / For facia and facia console in the interior compartment.
McLaren MSL.03.05.0003: Door Trim test specification For door trim in the interior compartment
McLaren MCL Q.S. 10: Paint Performance, Durability & Application Testing
MBN LV 124-2: Electric and Electronic Components in Motor Vehicles up to 3,5t – General Requirements, Test Conditions and Tests Part 2: Environmental Requirements Electric and Electronic Components
Mazda MES MN 405S: Test Method for Auto Fabrics, Carpets, Nonwoven, Vinyl, Artificial Leather and Leather
Mazda MES MN 405S § 7.9.1 - Seam strength Mazda - Determination of the seam strength
Mazda MES MN 405S § 7.23.1 A (Xenon arc) - Colour fastness to light (Xenon arc method) Xenon arc lamp equivalent to JIS B 7754
Mazda MES MN 405S § 7.22.2 - Stain resistance (water spotting) Stains
Mazda MES MN 405S § 7.22.1 - Color fastness to wash / immersion Color fastness to wash
Mazda MES MN 405S § 7.18 - Dust adhesion and removability Dust adhesion and removability
Mazda MES MN 400X - Fabrics, Carpets, and Unwoven Fabrics For Automobiles Outer woven / knit fabrics mainly used for automobile seats and linings (referred to as "fabrics"), and pile carpets and felt-like unwoven fabrics mainly used for automobile floors and others (referred to as "carpets(s)" and "unwoven fabric(s)" respectively)
Mazda MES CF 055 B - Odor test Odor from cabin parts
Mazda MES CF 050D - Burning behaviour Flammability of Interior parts
Mass determination, weighing Mass determination, weighing
Mass balancing Mass balancing
Martindale testing equipment kit Equipment for Martindale device, according to DIN EN ISO 12947-1
Mar resistance as per Oesterle - Scribing sensitivity Mar resistance
Manual function control under load General method - Manual function control under load
Manual function control Manual function control
MAN M3682 - Hook- and loop test Hook fastener test on upholstery fabrics
MAN M3658 - Hardness test (shore AO) Hardness testing- PUR integral foam - Steering wheel rim
MAN M3228: Resistance to tropical conditions of materials for the interior fittings of commercial vehicles Resistance to tropical conditions of materials for the interior fittings of commercial vehicles, such as curtain materials, textile upholstery, trim parts, floor coverings, and similar items.
MAN M 3683 - Soiling and cleaning behaviour Soiling and cleaning behaviour of plastic components in the vehicle interior - Test instruction
MAN M 3657 - Cream resistance Surfaces in the vehicle interior - Cream resistance - Test instructions
MAN M 3594: Burning behaviour of materials Burning behavior (ignitability, burning rate and melting behavior) of interior trim materials and all insulation materials of N2 and N3 (truck), M2 and M3 motor vehicles (buses) installed in the engine compartment and in any separated heater compartment
MAN M 3594: Burning behavior of materials Burning behavior (ignitability, burning rate and melting behavior) of interior trim materials and all insulation materials of N (truck), M2 and M3 motor vehicles (buses) installed in the engine compartment and in any separated heater compartment
MAN M 3594: Burning behaiour of materials Burning behaviour ( ignitability, burning rate and melting behaviour) of materials (semi-finished products, components and component groups) used in the interior construction and all insulation materials installed in the engine compartment and any separate heating compartment, as well as to the electrical cables installed in the vehicle for motor vehicles in classes N2 and N3 (trucks) and M2 and M3 (buses)
MAN M 3577 - Snag test Upholstery cover materials - Snag test
MAN M 3529: Testing the media resistance of plastics by means of stress corrosion cracking
MAN M 3528: Surface resistance of polymeric materials in interior and exterior Plastic surfaces for interior and exterior (injected, uncoated, grained, laminated, back injected)
MAN M 3524: Steering wheel cover made of PUR integral foam and leather Steering wheel cover
MAN M 3516:General requirements for mechanical systems, Proof of functional and quality capability For testing the purely mechanical properties of components and systems for vehicles of MAN Truck & Bus AG (MTB).
MAN M 3266: Polycarbonate (PC) - Material supply conditions
MAN M 3237: Thermoplastic elastomers TPE-S (Styrene-olefin block copolymers) - Material delivery conditions For thermoplastic elastomers with an elastomer phase based on styrene block copolymers.
MAN M 3165: Polyolefins - Material Delivery Terms
MAN M 3078: Cathodic dip painting - Primer coating materials - Technical terms of delivery
MAN M 3044: Upholstery Fabrics
MAN M 3043: Curtain fabrics
MAN M 3024: Artificial leather, leather and other flexible sheet materials
MAN M 3018: Corrosion protection and coating systems - For purchased parts, trucks and buses - Technical terms of delivery
MAN 321: Plastics - Acrylonitrile butadiene styrene (ABS) - Material delivery conditions High impact strength plastics
MAN 277 - Scratching with knife Adhesion test (scratching test)
Mace Snag Test - Determination of the thread puller tendency (Mace Snag Test)