SERVICE
SPECIFICATIONS

Title Description
AATCC 100 - Assessment of antibacterial finishes on textile materials Antibacterial finishes on textile materials: Assessment of
AATCC 107 - Colorfastness to Water Colorfastness to Water
AATCC 118 - Oil repellency Textiles: Oil repellency - Hydrocarbon resistance test
AATCC 124 (DIN EN ISO 15487) - Home laundering resistance Appearance of fabrics after repeated home laundering
AATCC 8 - Colorfastness to Crocking Colorfastness to Crocking: AATCC Crockmeter method
AATCC Evaluation Procedure 1 (ISO 105-A02) - Gray scale for assessing change in colour Gray Scale for assessing change in colour
AATCC Evaluation Procedure 2 (ISO 105-A03) - Gray scale for assessing change in staining Gray scale for assessing change in staining
AATCC Evaluation Procedure 3 (Chromatic Transference Scale) - Evaluation of Staining Evaluation of Staining with Chromatic Transference Scale (5-Step - Munsell Book of Color)
AATCC TM127 - Water resistance - Hydrostatic pressure Test method for water resistance - Hydrostatic pressure
AATCC TM42 - Water resistance - Impact penetration Test method for water resistance - Impact penetration
Abrasion by means of abrasion cloth General test method: Abrasion by means of abrasion cloth (e.g. BMW PR 231 § 4.1.1.17 v. 2015-07)
Abrasion over a window glass pane edge Abrasion over a window glass pane edge, diverse OEMs
Acoustic evaluation, at manual loading generell method (e.g. BMW PR 326.5 § 2.1.1)
Acoustics test Acoustics test, Noise analysis
Actuation forces Actuation forces (according to customer requirement)
Adhesion (manual) Adhesion (manual)
Adhesion friction General method - determination of adhesion friction / eg. Honda 8360Z-TR0-A000 § 6-6 (Sliding load)
Adhesion of flock Adhesion of flock
Adhesion test Adhesion test
Adhesion test acc. to ASTM D1000 - Adhesion of adhesive tapes
Adhesion test, parts Adhesion test, parts (bonded joints of parts)
Adhesive tape pull-off test - Adhesion test Adhesive tape pull-off test - e.g. DBL 9441 § 3.2.3; DBL 7392 § 3.1
AECTP 300 -Method 309 - Salt Fog Test Climatic Enviromental tests - north atlantic treaty organization - Salt Fog Test
AfPS GS 2019:01 PAH - Polycyclic aromatic hodycarbons Testing and evaluation of polycyclic aromatic hodrycarbons (PAH) for awarding the GS safety code
AK LV 110 - Hardness test (Shore L) - Determination of Shore L hardness Engineering specification for delivery (LV) - PUR-foam of steering wheel casing - material requirement - Point 10: Hardness test (Shore L) for PUR-foam at steering wheel
analytics for FAT AK26 standard measurement method - Determination of organic emissions organic emissions from vehicle interior measurements
Anti-slip test Anti-slip test
Artificial weathering General testmethod - Artificial weathering (for several test conditions)
Assembling force Assembling force (according customer requirements)
Assembly/Disassembly Assembly/Disassembly
ASTM B 571, § 13. Scribe-Grid Test - Adhesion Plating adhesion - Scribe-grid test
ASTM B117 - Salt spray fog test Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B137-95 - Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminium Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminium
ASTM B368 - Copper-Accelerated Acetic Acid-Salt Spray Test (CASS Test) Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM B456, Anhang X5 - Determining the number of active sites after corrosion Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium, Appendix X5: Determining the number of active sites after corrosion
ASTM B465, Appendix X4 - Determination of crack number/ pore number Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium, Appendix X4: Determining the number of discontinuities in chromium electroplating (Dubpernell test); Determination of crack number/ pore number
ASTM B487 - Determination of coating thickness Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
ASTM B556 - Measurement of thin chromium coatings by spot test Standard guide for measurement of thin chromium coatings by spot test
ASTM B571, § 8. Grind-Saw Test - Adhesion test Qualitative adhesion testing of metallic coatings
ASTM B604-91, Appendix X4 - Determination of crack number Decorative electroplated coatings of copper plus nickel plus chromium on plastics - X4 Determining the number of discontinuities in chromium electroplating (Dubpernell test)
ASTM B604-91, Appendix X4.4 - Determination of corrosion sites (pore number) Decorative electroplated coatings of copper plus nickel plus chromium on plastics - X4 Determining the number of discontinuities in chromium electroplating (Dubpernell test) - X4.4 Deterrmination of active corrosion sites by corrosion testing
ASTM B680-80 - Standard test method for seal quality of anodic coatings on aluminium by acid dissolution Standard Test Method for Seal Quality of Anodic Coatings on Aluminium by Acid Dissolution
ASTM B764 - STEP Test Standard test method for simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposit (STEP Test)
ASTM C297 - Flatwise Tensile Strength Standard Test MEthod for Flatwise Tensile Strength of Sandwich Constructions
ASTM D 714 - Evaluation of degree of blistering Standard test Method for Evaluating Degree of Blistering of Paints
ASTM D 903 - Version 1998 - Peel Strength Peel or Stripping Strength of Adhesive Bonds
ASTM D1000 § 37 - 53 - Tensile test; adhesion Standard test method for pressure-sensitive adhesive-coated tapes used for electrical and electronic applications § 37- 45 (tensile test), optionally § 46 - 53 (adhesion strength)
ASTM D1000 § 46 - 53 (Cold chamber) - Adhesion of adhesive tapes Standard test methods for pressure- sensitive adhesive-coated tapes used for electrical and electronic applications § 47 - 53 Adhesion strength to steel and backing
ASTM D1000 § 46 - 53 (Room climate) - Adhesion of adhesive tapes Standard test methods for pressure-sensitive adhesive-coated tapes used for electrical and electronic applications § 46 - 53 Adhesion strength to steel and backing ( Room climate)
ASTM D1000 § 54 - 65 - Unwind force Standard test method for pressure-sensitive adhesive-coated tapes used for electrical and electronic applications
ASTM D1003 - Haze and light transmittance Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1004 - 13 - Tear Resistance Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D1004 - 94a - Tear Resistance Standard test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1056 § 17-22 - Compression-Deflection Test Standard Specification for Flexible Cellular Materials - Sponge or Expanded Rubber, §17-22: Compression-Deflection Tests
ASTM D1056 § 42-48 - Determination of water absorption Standard Specification for Flexible Cellular Materials - Sponge or Expanded Rubber, § 42-48 Water absorption test
ASTM D1149-A - Ozone resistance Standard Test Methods for Rubber Deterioration - Cracking in an Ozone Controlled Environment
ASTM D1171 - Method B - Ozone resistance Standard Test Method for Rubber Deterioration - Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens); Method B: Quality retention rating
ASTM D1204-2 - Dimensional Change Standard Test Method for Linear Dimensional Change of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1238 - Determination of melt flow rates (MFR and MVR) Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1335 - Tuft withdrawal force Tuft Bind of Pile Yarn Floor Coverings
ASTM D1525 - Vicat softening temperature Standard test method for Vicat softening temperature of plastics
ASTM D1735 - Water resistance of coatings Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D1813 - thick leather thick, test method for measuring Thickness of leather test Specimes
ASTM D2208 - Breaking strength (Grab method) Breaking strength of Leather by the Grab Method
ASTM D2209 - Tensile properties Standard Test Method for Tensile Strength of Leather
ASTM D2211 - Elongation (Grab method) Standard Test Method for Elongation of Leather (Grab Method)
ASTM D2240 - Durometer hardness Standard Test Method for Rubber Property - Durometer Hardness
ASTM D2247 - Water resistance (Condensation atmosphere with constant humidity) Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D2261 - Tong tear strength Standard test method for Tearing strength of fabrics by the Tongue (single rip) procedure
ASTM D256 - Determination of Izod impact resistance (notched) Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D257 - Insulation resistance Standard test methods for DC resistance or conductance of insulating materials
ASTM D2632 - Resilience test Standard Test Method for Rubber Property - Resilience by Vertical Rebound
ASTM D3330/D3330M - Peel adhesion of tapes Standard test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3359-A - X-Cut Tape Test Standard Test Methods for Rating Adhesion by Tape Test - Test Method A: X-Cut Tape Test
ASTM D3359-A - X-Cut Tape Test Standard Test Methods for Rating Adhesion by Tape Test - Test Method A: X-Cut Tape Test
ASTM D3359-B - Cross-Cut Tape Test Standard Test Methods for Rating Adhesion by Tape Test - Test Methode B: Cross-Cut Tape Test
ASTM D3359-B - Cross-Cut Tape Test Standard Test Methods for Rating Adhesion by Tape Test - Test Methode B: Cross-Cut Tape Test
ASTM D3512 - Pilling resistance (Random Tumble Pilling Tester) Standard test method for pilling resistance and other related surface changes of textile fabrics: random tumble pilling tester
ASTM D3574 Test A - Density test Standard Test Methods for Flexible Cellular Materials - Slab, Bonded and Molded Urethane Foams - Test A: Density Test
ASTM D3574 Test A - Density test Standard Test Methods for Flexible Cellular Materials - Slab, Bonded and Molded Urethane Foams - Test A: Density Test
ASTM D3574 Test B1 - Indentation force deflection test - specified deflection (IFD) Standard Test Methods for flexible cellular materials- slab, bonded and molded urethane foams- Test B1: Indentation force deflection test - specified deflection (IFD)
ASTM D3574 Test C - Stress-strain characteristic in compression Standard Test Methods for flexible cellular materials - slab, bonded and molded urethane foams - Test C: Compression force deflection test
ASTM D3574 Test D - Compression set at standard conditioning temperature Standard Test Methods for flexible cellular materials - slab, bonded and molded urethane foams - Test D: Constant deflection compression set test
ASTM D3574 Test E - Tensile Test Standard Test Methods for flexible cellular materials - slab, bonded and molded urethane foams - Test E: Tensile Test
ASTM D3574 Test F - Determination of tear strength Standard Test Methods for flexible cellular materials - slab, bonded and molded urethane foams - Test F: Tear resistance test
ASTM D3574-Test J - Steam autoclave ageing Standard Test Methods for flexible cellular materials - slab, bonded and molded urethane foams - Test J: Steam autoclave ageing
ASTM D3677 - Infrared spectrophotometry Standard test methods for rubber - Identification by infrared spectrophotometry
ASTM D3763 - Determination of puncture impact behaviour Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
ASTM D3767-A - Determination of Thickness Standard Practice for Rubber - Measurement of Dimensions
ASTM D3775 - Number of threads Standard test method for End (Warp) and Pick (Filling) count of woven fabrics
ASTM D3882 - Bow and Skew measurement Standard test method for Bow and Skew in woven and knitted fabric
ASTM D3884 - Abrasion Resistance (Taber) Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method - Taber abraser)
ASTM D3887 § 12 - Determination of the number of wales and stitch courses Standard Specification for Tolerances for Knitted Fabrics (Determination of the number of wales and stitch courses)
ASTM D3939 - Mace Snag Test Standard Test Methode for Snagging Resistance of Fabrics (Mace)
ASTM D395-B - Compression Set Standard Test Methodes for Rubber property - Compression Set, Method B: Compression under constant deflection in air
ASTM D4060 - Abrasion resistance by the Taber abraser Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D412 - 06a - Tensile properties and tensile set Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers - Tension
ASTM D413 - A - Adhesion test (Type A) Rubber Property - Adhesion to Flexible Substrate
ASTM D471 - Effect of liquids Standard test method for rubber property - Effect of liquid
ASTM D5034 - Grab tensile properties Standard Test Method for Breaking Strength and Elongation of Textil Fabrics (Grab Test)
ASTM D523 - Gloss measurement Standard Test Method for Specular Gloss
ASTM D5427 § 8.4 - Accelerated aging (cycle aging) Standard practice for accelerated ageing of inflatable restraint fabrics; § 8.4: Cycle aging
ASTM D5427 § 8.4 - Accelerated aging (cycle aging) Standard practice for accelerated ageing of inflatable restraint fabrics; § 8.4: Cycle aging
ASTM D5587 - Tearing strength - Trapezoid Procedure Standard test method for tearing strength of fabrics by trapezoid procedure
ASTM D5587 - Tearing strength - Trapezoid Procedure Standard test method for tearing strength of fabrics by trapezoid procedure
ASTM D570 / ISO 62 - Determination of water absorption Standard Test Method for water Absorption of Plastics
ASTM D573 - Heat ageing Standard Test Method for Rubber - Deterioration in an air oven
ASTM D5733 - Tearing strength (trapezoid procedure) Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure
ASTM D5963 (DIN ISO 4649) - Abrasion resistance Standard test method for Rubber Property - Abrasion resistance (Rotary Drum Abrader)
ASTM D6182, cold storage - Permanent folding (Flexometer method) Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM D6182, dry - Permanent folding (Flexometer method) Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM D624 - Tear strength Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D638 - Tensile properties Standard Test Method for Tensile Properties of Plastics
ASTM D648 - Determination of deflection temperature under load Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D747 - Test procedure according to Ohlsen Standard Test Method for Apparent bending modulus of plastics by means of a Cantilever Beam
ASTM D751 § 11-15 - Breaking strength, Grab test method Standard Test Methods for Coated Fabrics - § 11-15: Breaking strength, Grab Test Method
ASTM D751 § 32-35 - Trapezoidal Tear Standard Test Methods for Coated Fabrics - Trapezoidal Tear
ASTM D751 § 45-48 - Adhesion Standard Test Method for Coated Fabrics - Adhesion of coating to fabric
ASTM D785 - Determination of Rockwell hardness Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D7869 - Accelerated weathering Standard Practice for Xenon ArcExposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM D790 - Flexural properties Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D790 - Flexural properties Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials
ASTM D792 - Density Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D86 - Distillation of petroleum products Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D885 § 16, 18, 19 - Tensile properties of yarns Standard test method for tire cords, tire cords fabrics, and industrial filament yarns made from manufactured organic-base fibers; Section 16, 18 and 19: Breaking strength, breaking tenacity and elongation at break of conditionend yarn and cords
ASTM D885-X2.4 - Shrinkage behaviour in hot air Shrinkage of conditioned yarns and cords at elevated temperature
ASTM D896 - Resistance to Chemical Reagents Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
ASTM D925 - Method A - Contact Stain Standard Test Methods for Rubber Property - Staining of Surfaces (Contact, Migration, and Diffusion), Method A - Conatct Stain
ASTM D925 - Method B - Migration Stain Standard Test Methods for Rubber Property - Staining of Surfaces (Contact, Migration, and Diffusion), Method B - Migration Stain
ASTM E139 - Short-term creep test at high temperature Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM F1670 - Resistance to penetration by synthetic blood Standard test method for Resistance of Materials used in protective clothing to penetration by synthetic blood
ASTM F1671/F1671M (Comp Viral Penetration) - Comp Viral Penetration - Material Compatibility Test Standard test method for Resistance of Materials used in protective clothing to penetration by Blood-Borne pathogens using Phi-X174 Bacteriophage penetration as a test system: Comp Viral Penetration - Material Compatibility Test
ASTM F1671/F1671M (Test Viral Penetration) - Test Viral Penetration - Resistance of Materials to Penetration by Blood-Borne Pathogens Standard test method for Resistance of Materials used in protective clothing to penetration by Blood-Borne pathogens using Phi-X174 Bacteriophage penetration as a test system: Test Viral Penetration - Resistance of Materials to Penetration by Blood-Borne Pathogens
ASTM G21 - Determining resistance to fungi Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G85-02 Annex A1 - Acetic acid-salt spray test Standard practice for modified salt spray (Fog) testing, Annex A1: acetic acid-salt spray test, continuous.
Aston Martin AMETP-000085 - Alkali resistance Alkali resistance of exterior decorative finishes
Aston Martin AMETP-000092 - Adhesion of paint/coating, tape test Tape Adhesion Test for Paints and Coatings
Aston Martin AMETP-000093 - High pressure cleaning (90°) Paint and Lacquer Perfromance to High Pressure Cleaner
Aston Martin AMLTM.00.122-00 - Accelerated Environmental Cycling Aston Martin AMLTM.00.122-00: Laboratory Test Method: Accelerated Environmental Cycling
Audi Spec. Textile-Floor Mat AU37X § 19.6.1 - Anti-slip test §19.6 Component- and functional testing: back coating - Anti-slip test (component- performance specifications part B: Audi original accessories)
B 80.30 commodities - BgLM aus Kunststofffen Investigation of commodities made ¿¿of plastic, which are intended to come into contact with food
B 82.02-2 (textiles) objects of commodities / DIN EN 14362-1 - Determination of certain aromatic amines from azo colorants in textiles Investigation of commodities - Methods for determination of certain aromatic amines from azo colorants in textiles - Part 1: Cross-reference certain azo colourants without prior extraction
B 82.02-3 (leather) objects of commodities/ DIN ISO/TS 17234 - Determination of certain azo colorants in coloured leather Investigation of commodities - Determination of certain azo colorants in coloured leather (DIN ISO / TS 17234)
B 82.02-4(Polyestermethod)objects of commodities/ DIN14362-1 - Determination of certain aromatic amines from azo dyes Investigation of commodities - Methods for determination of certain aromatic amines from azo colorants in textiles - Part 2: Cross-reference certain azo colourants by extracting the fibers
B 82.02-8 objects of commodities - Determination of Pentachlorphenol Investigation of commodities - Identification and determination of pentachlorophenol (PCP) in commodities, especially leather and textiles (Reference method)
B 82.02-9 objects of commodities - Determination of aminoazobenzene Investigation of commodities - Verification of the use of azo colourants which can release 4-Aminoazobenzene
B 82.02. objects of commodities - Determination of formaldehyd emission Investigation of commodities - Determination of formaldehyde emission from textile materials and articles
B 82.10.1 objects of commodities - Saliva and persperation resistance Investigation of commodities - Testing of coloured children's toys to saliva and perspiration (DIN 53 160)
Ball drop test Ball drop test
Ball roll test Ball roll test
based on RAL-GZ 430-Anex 18 & VDA 270 - Odour Odour test for furniture leather - rapid method based on VDA 270 and RAL-GZ 430
BGI 505-23 - Determination of N-nitrosamines Procedure for Determining of N-Nitrosamines
BGI 505.23 (Analysis of delivered cartridges) - Determination of N-Nitrosamines Procedure for Determining of N-Nitrosamines (Analysis of delivered cartridges)
BISFA 2007 - chapter 6 - Determination of intermingling Textured Filament Yarns - Determination of intermingling per unit length
Blocking General test method - Blocking tendency
BMW AA 0081 - Single impact testing Determination of the separation layer of multilayer paint systems by means of single impact testing
BMW AA 014 - Colour measurement (CIELAB) Colour measurements with the Datacolor 600
BMW AA 0264 - Multi-stone chip test with salt water exposure Multi-stone chip test with salt water exposure
BMW AA 0616 - Weight change with contact storing Determination of weight change with contact storing
BMW AA-0026 / Exterior - Ageing resistance test Ageing resistance test - Scope Exterior
BMW AA-0026 / Exterior - Aging resistance test Aging resistance test - Scope Exterior
BMW AA-0026 / Exterior - Aging resistance test Aging resistance test - Scope exterior
BMW AA-0026 / Interior - Aging resistance test Ageing resistance test - Scope Interior
BMW AA-0028 - Infrared spectrometry (IR / FTIR) Analysis of organic and inorganic smaples with FTIR
BMW AA-0053 - Sun cream resistance Sun cream resistance of painted parts in the interior
BMW AA-0054 - Resistance to car-wash machines Resistance of coatings to car-wash machines
BMW AA-0055, Test method 1 - Chemical resistance, fuel resistance Chemical resistance test of surfaces - Test method 1: Fuel resistance
BMW AA-0055, Test method 2 - Chemical resistance Chemical resistance test of surfaces - Test method 2
BMW AA-0055, Test method 3 - Chemical resistance Chemical resistance test of surfaces - Test method 3
BMW AA-0055, Test method 4 - Chemical resistance Chemical resistance test of surfaces - Test method 4
BMW AA-0055, Test method 5 - Chemical resistance Chemical resistance test of surfaces - Test method 5
BMW AA-0055, Test method 7 - chemical resistance Resistance testing of surfaces against chemicals - Test method 7, Resistance of anodized surfaces
BMW AA-0055, Test method 7 - chemical resistance Resistance testing of surfaces against chemicals - Test method 7, Resistance of anodized surfaces
BMW AA-0055, Test method 8 - Acid-Heat-Alkali resistance test (SWA-test) Resistance testing of surfaces against chemicals - Test method 8, Resistance of anodized surfaces by Acid-Heat-Alkali resistance test (SWA-test)
BMW AA-0061 - Determination of formaldehyd emission Formaldehyd emission from non-metallic materials and components, determined by HPLC
BMW AA-0079 - Determination of multi impact stone chip resistance Determination of multi impact stone chip resistance
BMW AA-0101 - Gloss measurement Reflectometer Value (Gloss)
BMW AA-0129 - Cass testing (copper chloride-acetic acid salt spray testing) Corrosion tests in artificial atmospheres - Salt spray tests (Copper chloride-acetic acid salt spray testing, CASS testing )
BMW AA-0134 - Dry scratch resistance test Dry scratch resistance test using Crockmeter
BMW AA-0136 - Resistance to pressure water jet Testing of Resistance to Pressure Water Jet (Steam Jet Test)
BMW AA-0136 - Resistance to pressure water jetting Testing of resistance to pressure water jetting
BMW AA-0136 - Resistance to pressure water jetting Testing of resistance to pressure water jetting
BMW AA-0136 - Steam jet test Testing of resistance to pressure water jetting
BMW AA-0149 - Differential scanning calorimetry Differential Scanning Calorimetry (DSC)
BMW AA-0180 - Cross hatch testing Cross hatch testing
BMW AA-0180 - Cross hatch testing Cross hatch testing
BMW AA-0203 - Hydrolysis Test Hydrolysis Test
BMW AA-0213 - Condensation water constant atmosphere test Condensation water constant atmosphere test
BMW AA-0224 - Corrosion Test Cyclic Corrosion Test
BMW AA-0224 - Cyclic corrosion test Cyclic corrosion test
BMW AA-0235 / DIN EN ISO 16474-2 (DIN EN ISO 4892-2) - Accelerated weathering Accelerated weathering crack stability
BMW AA-0235 / SAE J2527 - Accelerated weathering Accelerated weathering crack stability
BMW AA-0235 / SAE J2527 - Accelerated weathering Accelerated weathering crack stability
BMW AA-0236 / DIN EN ISO 4892-2 (Procedure A - BST 65 °C) - Weathering colour stability Accelerated weathering colour stability
BMW AA-0236 / DIN EN ISO 4892-2 (Procedure A - BST 65 °C) - Weathering colour stability Accelerated weathering colour stability
BMW AA-0256 - Measurement of Thickness and Grammage Measurement of Thickness and Grammage of Damping Pads
BMW AA-0256 - Measurement of Thickness and Grammage Measurement of Thickness and Grammage of Damping Materials
BMW AA-0257 - Measurement of structure and gloss Measurement of structure and gloss on painted surfaces
BMW AA-0324 - Salt spray test Salt spray test
BMW AA-0324 - Saltspray-test Saltspray-test
BMW AA-0328 - Peel-resistance Peel-resistance of adhesive tapes and protective covers (liner)
BMW AA-0340 - Scalpel cut Scalpel cut on CFK-parts with clear coating
BMW AA-0349 - Stapelfähigkeit Stack Ability of Damping Pads
BMW AA-0354 - Color Measurement Technical Understanding of color measurement of test panels for Initial and Batch release
BMW AA-0403 - Visual Color Comparison and Metamerism Test Visual color Comparison and Metamerism Test
BMW AA-0412 - Resistance to abrasion Abrasion Test of Leather by Means of Ball Plate
BMW AA-0412 - Resistance to abrasion Abrasion Test of Leather by Means of Ball Plate
BMW AA-0419 - Staining Behavior and Cleaning Ability Staining Behavior and Cleaning Ability of Leather
BMW AA-0419 - Staining Behavior and Cleaning Ability Staining Behavior and Cleaning Ability of Leather
BMW AA-0420 - Hydrolysis at Leather Hydrolysis at Leather
BMW AA-0471 - Abrasion Resistance using the ABREX Test Equipment Abrasion Resistance using the ABREX Test Equipment
BMW AA-0496 - Separating test Separating test
BMW AA-0497 - Shear tensile test Resistance to thermal distortion
BMW AA-0547 - Determination of mass per unit area and thickness of effective pile and stitch rate Determination of mass of effective pile per unit area above backing, of effective pile thickness and stitch rate for carpets and floor mats, band knife shearing machine method
BMW AA-0551, based on DIN 53121 - Bending stiffness Bending stiffness - 2-point procedure based on DIN 53 121
BMW AA-0563 - Repeated flexing (Flexometer method) Flex resistance at low temperature
BMW AA-0565 - Shrinkage Test Shrinkage Test Instrumten Panel
BMW AA-0566 - Penetration Behaviour Leather Penetration Behaviour Leather
BMW AA-0567, acidic - Colour fastness to perspiration Perspiration Resistance
BMW AA-0567, alkaline - Colour fastness to perspiration Perspiration Resistance
BMW AA-0568 - Dimensional stability Dimensional Stability Leather
BMW AA-0570 - Abrasion resistance of flocked plastic parts Test of abrasion resistance of flocked plastic parts
BMW AA-0574 - Determination of amines Determination of primary and secondary amines in air using LC-MS
BMW AA-0602 Compression set - Compression set at upholstery wadding Determination of pressure sensitivity and compression set at upholstery wadding
BMW AA-C 166 / TD_G_CB_SOP_5.4_113_G_0 - Determination of amines Determination of organic substances by HPLC (amines)
BMW AA-N 040 - Determination of mass per unit area and thickness of effective pile and stitch rate Determination of mass of effective pile per unit area above backing, of effective pile thickness and stitch rate for carpets and floor mats, band knife shearing machine method
BMW AA-N 043 - Abrasion resistance of flocked plastic parts Test of abrasion resistance of flocked plastic parts
BMW AA-N 067, based on DIN 53121 - Flexural rigidity Determination of stiffness in bending - based on DIN 53 121
BMW AA-N 071 / condition as delivered - Staining behaving and cleaning ability of Leather Staining behaving and cleaning ability of leather, delivered condition
BMW AA-N 071 / Staining (condition as delivered) - Staining behaving of Leather Staining behaving of Leather, delivered condition
BMW AA-N 071 / with Hydrolysis weathering - Staining behaving and cleaning ability of Leather Staining behaving and cleaning ability of leather, hydrolysis ageing after cleaning
BMW AA-N 071 / with Light fastness - Staining behaving and cleaning ability of Leather Staining behaving and cleaning ability of leather, light fastness test after cleaning
BMW AA-P 107 - Gloss measurement Reflectometer value (gloss)
BMW AA-P 124 - Visual color comparison and metamerism test Visual color Comparison and Metamerism Test
BMW AA-P 177 - Cross hatch testing Cross hatch testing
BMW AA-P 192 - Multi impact stone chip resistance Determination of multi impact stone chip resistance
BMW AA-P 194, method 1 - Chemical resistance Chemical resistance test of surfaces
BMW AA-P 194, method 2 - Chemical resistance Chemical resistance test of surfaces, method 2
BMW AA-P 224 - Condensation water constant atmosphere test Condensation Water Constant Atmosphere Test
BMW AA-P 257 - Resistance of painted parts against sun lotion Resistance of painted parts within the interioor against sun lotion
BMW AA-P 259 - Mar resistance (Crockmeter) Mar resistance testing using Crockmeter
BMW AA-P 275 - Ageing resistance test Ageing resistance test
BMW AA-P 276 - Temperature cycle test Temperature Cycle Test
BMW AA-P 290 - Steam jet test Steam jet cleaner test of coatings
BMW AA-P 296 - Abrasion resistance using the Abrex test equipment Abrasion resistance using the ABREX Test Equipment (dry + test media acc. to GS 97045)
BMW AA-P 308 - Hydrolysis test Hydrolysis test
BMW AA-P 319 - Scalpel cut Scalpel cut on CFK-parts with clear coating
BMW Compressibility & recovery ability Compressibility & recovery ability (see BMW GS 93026-1)
BMW GS 93010-2 § 7.6.1.1 - Flexural stress in low temperatures ("R" index) Elastomers - Test procedures and tolerances for material characteristics; § 7.6.1.1: Flexural stress in low temperatures ("R" index)
BMW GS 93011-1 (950°C) - Determination of Incineration residue Elastomers - Identification, Determination of Residue on Ignition of Halogen-free Elastormers (950°C)
BMW GS 93011-2 (950°C) - Determination of Incineration residue Elastomers - Identification, Determination of Residue on Ignition of Elastomers Containing Chlorine, Bromine or Iodine (950°C)
BMW GS 93011-3 - Determination of extractables Elastomers - Identification, Determination of Extractable Constituents by Means of Extraction using Cyclohexane/Acetone
BMW GS 93011-4 - Thermogravimetrical analysis (TGA) Elastomers - Identification, Determination of thermal degradation behavior using thermogravimetry (TG)
BMW GS 93011-5 - Low-temperature standard value Elastomer - identification, Determination of low-temperatur standard value by differential scanning calorimetry (DSC)
BMW GS 93011-6 - Pyrolysis IR Elastomers - identification, Analysis by infrared spectroscopy (IR), Pyrolysis IR
BMW GS 93011-7-A - Paint indifference; method A: contact discoloration and environment discoloration due to migration Elastomers - Determination of properties, Methods of Test for Determination Discoloration of Organic Materials due to Elastomeres (Paint Indifference); Method A: Contact discolouration and environment discoloration due to migration
BMW GS 93011-7-B - Paint indifference; method B: washout effect Elastomers - Determination of properties, Methods of Test for Determination Discoloration of Organic Materials due to Elastomeres (Paint Infifference); Method B: Determination of the washout effect
BMW GS 93011-8 - Resistance to stress cracking Elastomers - Determination of Properties, Determination of Resistance to Stress Cracking of Plastics due to Contact with Elastomers
BMW GS 93011-9 - Low temperature bending test Elastomers - determination of properties, Temperature Influence, Low Temperature Bending Test
BMW GS 93026-1 § 5.1.3 - Fastness to water spotting Textiles of the vehicle interior - requirements and testing; § 5.1.3 - Fastness to water spotting
BMW GS 93042 § 6.2.1.2 (17) Surface tests - Blooming (after storage over water) BMW GS 93042 - Thermoplastic Elastomers, Requirements and tests, § 6.2.1.2 Surface tests - Blooming
BMW GS 97014-2 - Emissions measurement in SHED chambers (CARB test) Emissions measurement in SHED chambers - Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel
BMW GS 97014-2 including CARB screening - Emissions measurement in SHED chambers (CARB test) Emissions measurement in SHED chambers - Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel (including CARB screening)
BMW GS 97014-2, based on - Emissions measurement in SHED chambers (CARB test) Emissions measurement in SHED chambers - Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel
BMW GS 97014-3 - Emissions measurement with air exchange in a testing chamber (summer test) Emissions measurement with air exchange in a testing chamber, Determination of volatile, organic emissions from components semi-finished products and material.
BMW GS 97014-4 - Determination of the olfactory behavior Emissions measurement with air exchange in a testing chamber - Determination of the olfactory behavior (The odor test must be carried out together with the chamber emission test acc. to BMW GS 97014-3.)
BMW GS 97017 § 5.6 - Russian mud test Coatings on plastic parts, Electroplated plastic parts, Requirements, tests - § 5.6 Russian mud test
BMW GS 97034-1 - Manual abrasion test Surface test of motor vehicle interior materials
BMW GS 97034-1 - Manual abrasion test (Abrex) Surface test of motor vehicle interior materials - Manual abrasion test
BMW GS 97034-2 - Finger nail test Surface test of motor vehicle interior materials, Finger nail test - replaced PR 307.4 (5.2)
BMW GS 97034-2 - Finger nail test Surface test of motor vehicle interior materials
BMW GS 97034-3 / PR 513 - Shoe sole test Surface test of motor vehicle interior materials - Shoe sole test
BMW GS 97034-3 / PR 513 - Shoe sole test with Abrex test device Surface test of motor vehicle interior materials - Shoe sole test with Abrex test rig
BMW GS 97034-4-A - Color abrasion behavior Surface test of motor vehicle interior materials - Color abrasion behavior
BMW GS 97034-4-A - Color abrasion bevaviour (Abrex) Surface test of motor vehicle interior materials - Color abrasion bevaviour (Test procedure A: Abrex)
BMW GS 97034-4-B - Color abrasion behavior (Crockmeter) Surface test of motor vehicle interior materials - Color abrasion behavior
BMW GS 97034-4-B - Color abrasion bevaviour (Crockmeter) Surface test of motor vehicle interior materials - Color abrasion bevaviour (Test procedure B: Crockmeter)
BMW GS 97034-4-C - Color abrasion behavior (Veslic) Surface test of motor vehicle interior materials - Color abrasion behavior
BMW GS 97034-4-C - Color abrasion bevaviour (Veslic) Surface test of motor vehicle interior materials - Color abrasion bevaviour (Test procedure C: Veslic)
BMW GS 97034-5-A - Resistance to cleaning agents Surface test of motor vehicle interior materials - Resistance to cleaning agents
BMW GS 97034-5-A - Resistance to cleaning agents (Abrex) Surface test of motor vehicle interior materials - Resistance to cleaning agents (Test procedure A: Abrex)
BMW GS 97034-5-B - Resistance to cleaning agents Surface test of motor vehicle interior materials - Resistance to cleaning agents
BMW GS 97034-5-B - Resistance to cleaning agents (Crockmeter) Surface test of motor vehicle interior materials - Resistance to cleaning agents (Test procedure B: Crockmeter)
BMW GS 97034-5-C - Resistance to cleaning agents Surface test of motor vehicle interior materials - Resistance to cleaning agents
BMW GS 97034-5-C - Resistance to cleaning agents (Veslic) Surface test of motor vehicle interior materials - Resistance to cleaning agents (Test procedure C: Veslic)
BMW GS 97034-6 B - Soiling behavior and cleaning ability (Martindale) Surface test of motor vehicle interior materials - Soiling behavior and cleaning ability B
BMW GS 97034-6-A - Soiling behavior and cleaning ability (Abrex) Surface test of motor vehicle interior materials, soiling behavior and cleaning ability (Test procedure A: Abrex)
BMW GS 97034-6-A - Soiling behavior and cleaning ability (Abrex) Surface test of motor vehicle interior materials - Soiling behavior and cleaning ability (Test procedure A)
BMW GS 97034-6-B / BMW PR 121.3 - Soiling behavior and cleaning ability (Martindale) Surface test of motor vehicle interior materials, soiling behavior and cleaning ability (Test procedure B: Martindale)
BMW GS 97034-6-C / DIN EN ISO 105-X12 - Soiling behavior and cleaning ability (Crockmeter) Surface test of motor vehicle interior materials - Soiling behavior and cleaning ability (Test procedure C)
BMW GS 97034-7 - Drop test Surface test of motor vehicle interior materials, drop test
BMW GS 97034-8 - Determination of the scratch inclination Surface test of motor vehicle interior materials, determination of the scratch inclination
BMW GS 97034-8 - Determination of the scratch inclination Surface test of motor vehicle interior materials - Determination of the scratch inclination
BMW GS 97034-8, based on - Determination of the scratch inclination Surface test of motor vehicle interior materials - Determination of the scratch inclination
BMW GS 97034-9 - Scratch test Surface test of motor vehicle interior materials, scratch test
BMW GS 97034-9 - Scratch test Surface test of motor vehicle interior materials - Scratch test
BMW GS 97034-9, based on - Scratch test Surface test of motor vehicle interior materials
BMW GS 97036 - DMA Dynamic mechanical analysis (DMA) on polymers and adhesives
BMW GS 97038 - Burning behaviour Determination of burning behavior to automotive interior trim materials
BMW GS 97060-3 § 3.3 - Assessment of optic and haptic characteristics Surfaces of the vehicle interior - Production and audit requirements for the BMW brand
BMW PA C-307 / TD_G_CB_SOP_5.4_111_G_0 (GC-MS) - Determination of phthalates Determination of Phthalates in air using GC-MS
BMW PA-N 150 - Mass and thickness of effective pile per unit area and stitch rate Determination of mass of effective pile per unit area above backing, of effective pile thickness and stitch rate for carpets and floor mats, band knife shearing machine method
BMW PA-P 028 - Cross hatch testing Cross hatch testing
BMW PA-P 100 - Gloss measurement Reflectometer value (gloss)
BMW PA-P 208 - Condensation water constant atmosphere test Condensation Water Constant Atmosphere Test
BMW PA-P 230 - Aging resistance test Aging resistance test
BMW PA-P 231 - Temperature cycle test Temperature Cycle Test
BMW PA-P 250 - Visual color Comparison and Metamerism Test Visual color Comparison and Metamerism Test
BMW PA-P 295 - Paint Compatibility with Sun Screen Lotion Paint Compatibility of Interior Parts with Sun Screen Lotion
BMW PA-P 315 - Abrasion resistance using the Abrex test equipment Abrasion Resistance using the ABREX Test Equipment (dry + test media according to BMW AA-P 077)
BMW PR 060.4 - Dynamic fatigue test Test of the service life behavior of seat covers made of PUR foam materials
BMW PR 100§2.8.3.1 - Stiffness test BMW PR 100§2.8.3.1 Stiffness test
BMW PR 102.4 § 2.4.3 - Air permeability Determination of air permeability of sample plates (Headliner)
BMW PR 104 §2.6.4.5 - Endurance test BMW PR 104 §2.6.4.5 - Seat belt outlet finisher endurance test
BMW PR 121.2 - Staining and Cleanability Staining and Cleanability behaviour of surface material
BMW PR 121.3 - Staining and Cleanability Staining and Cleanability behaviour of surface material
BMW PR 121.4 - Soiling behavior and cleaning ability of surface materials Soiling behavior and cleaning ability of surface materials
BMW PR 220 - Determination of dent resistance dent resistance plastic outer skin
BMW PR 223.2 - Determination of Buckling strength / Buckling resistance Buckling strength / Buckling resistance outer panel
BMW PR 231 (Florida Mode) - Weather resistance (humid-warm climate, e.g. Florida) Artificial weathering: outdoor use / Florida mode
BMW PR 231 (Florida-mode) - Resistance to weathering (humidity-warm climate, e.g. Florida) Simulated Weathering of external parts / Florida-mode
BMW PR 231 (Kalahari mode) - Resistance to weathering, dry-hot climate (e.g. Kalahari, Arizona, South America) Simulated Weathering of external parts / Kalahari-mode
BMW PR 231 (Kalahari-mode) - Resistance to weathering, dry-hot climate (e.g. Kalahari, Arizona, South America) Simulated Weathering of external parts / Kalahari-mode
BMW PR 292 § 2.1.20 - Pyrolysis-GC/MS Attachments underbody - gas chromatography / mass spectrometry (Pyrolysis-GC-MS)
BMW PR 303.4 - Climate cycle test Climate cycle test for equipment parts
BMW PR 303.5 - Climate cycle test Climate cycle test for equipment parts
BMW PR 306.4 (based on) - Sun simulation Sun simulation for equipment parts
BMW PR 306.4 - Sun simulation Sun simulation for equipment parts
BMW PR 306.4 c - Sun simulation Sun simulation - Part c: direct radiation of exterior and interior parts (test environment c, 85 °C)
BMW PR 306.5 part a - Solar simulation Solar simulation for trim parts, part a: Instrumental panel, Rear shelf
BMW PR 306.5 part b - Solar simulation Solar simulation for trim parts, part b: Door trim panel
BMW PR 306.5 part c - Solar simulation (behind horizontal glass pane) Solar simulation for trim parts, part c: Test behind horizontal glass pane
BMW PR 306.5 part d - Solar simulation Solar simulation for trim parts, part d: Other interior components
BMW PR 306.5 part e - Solar simulation Solar simulation for trim parts, part e: Exterior add-on parts
BMW PR 306.5 part f - Solar simulation (complete vehicle) Solar simulation for trim parts, part e: Complete vehicle
BMW PR 307.4 § 2.1 - Gloss test Evaluation of the sensitivity of component surfaces against scratching, § 2.1 Gloss test
BMW PR 307.4 § 2.2 - Cutting test Evaluation of the sensitivity of component surfaces against scratching, § 2.2 Cutting test
BMW PR 307.4 § 5.1 - Abrasion test with steel wool Evaluation of the sensitivity of component surfaces against scratching, § 5.1 Abrasion test with steel wool
BMW PR 307.4 § 5.3 - Drop test Evaluation of the sensitivity of component surfaces against scratching, § 5.3 drop test
BMW PR 308.1 - Climatic testing of adhesive joints Climatic testing of adhesive joints of equipment parts
BMW PR 308.2 - Climatic test for bonded joints and composite materials on trim parts Climatic testing of adhesive joints and material bonds of equipment parts
BMW PR 309.2 (BMW PR 303.5) - Vibration test Vibration test for trim components - in combination of different components
BMW PR 311.2 - Measurement of annoying noise (rattling/creaking) for components and overall vehicle Annoying noise test / Shaker test
BMW PR 357 (BMW PR 303) - Dimensional stability Determination of dimensional stability of car interior lining and seat lining under climatic extremes
BMW PR 357 - Dimensional stability Determination of dimensional stability of car interior lining and seat lining under climatic extremes
BMW PR 360 - Abrasion using Taber Abrasion using Taber
BMW PR 360 - Abrasion using Taber Abrasion using Taber
BMW PR 361 - Mace Snag test Determination of tendency to thread pulling of materials
BMW PR 362 - Determination of volatile substances in leather (moisture measurement) Determination of volatile substances in leather (moisture measurement)
BMW PR 363.1 - Cleanability after soiling with Smoking Flour and Finery- and Wall Sand Cleaning ability of surface materials with Smoking Flour and Finery- and Wall Sand
BMW PR 364 - Water capillarity Water capillarity test for threads
BMW PR 368 - Seam strength Seam strength for textiles
BMW PR 372 § 2.1.6.1 - Weight load static BMW PR 372 - weight load static
BMW PR 372 § 2.1.6.2 - Weight loading dynamic BMW PR 372 - Weight loading dynamic
BMW PR 372 §2.1.7.1 - Rigidity test BMW PR 372 §2.1.7.1 - rigidity test
BMW PR 372 §2.1.7.1 - Stiffness test BMW PR 372 §2.1.7.1 - Stiffness test
BMW PR 380 § 2.2.5 (based on DIN 54310) - Adhesion test Floor mats - Separating force between the backing and pad (based on DIN 54310)
BMW PR 380.3 § 2.3.1 (based on DIN EN 388) - Piercing force Test specification for floor mats - Functional tests - Mechanical requirements; § 2.3.1: piercing force (puncture force) based on DIN EN ISO 388
BMW PR 380.4 § 2.2.1 (following DIN EN 388) - Puncture force Test specification - Floor Mats
BMW PR 384.1 - Recess test Recess test
BMW PR 397 - Rotting Consistency Rotting Consistency
BMW PR 397 - Rotting Consistency Rotting Consistency
BMW PR 399 - Edge Thread withdrawal force Edge Thread withdrawal force
BMW PR 401 - Felting Resistance Felting Tendency of Velours and Dilour Carpet Qualities
BMW PR 401 - Felting tendency Felting Tendency of Velours and Dilour Carpet Qualities
BMW PR 501 Part 1 - Jar test Evaluation of the interaction of materials in interioir parts
BMW PR 501 Part 1 - Jar test Interaction of PUR materials with polycarbonate-containing thermoplasts in the vehicle interior
BMW PR 501 Part 2 - Desiccator test Verification of the interaction of materials in the vehicle interior (desiccator test)
BMW PR 506 - Fingerprint test BMW: Fingerprint test on surfaces of interior parts
BMW PR 512 - Finger nail test Finger nail test with the Abrex test rig
BMW PR 524 - Adhesion test PR 524: Assessment of the adhesion of PUR foams to inserts of foam composite parts
BMW PR 556 - Cream resistance (drop test) Resistance of unpainted thermoplastic surfaces in the interior area against creams
BMW PR 557 (Exterior) - Chemical resistance Resistance unpainted thermoplastic surfaces in the exterior area to media
BMW PR 557 (Interior) - Chemical resistance Resistance unpainted thermoplastic surfaces in the interior area to media
BMW PrV 152 § 2.4 - Resistance to media Resistance to media
BMW PrV 311.1 - Dimensional stability Determination of dimensional stability of car interior lining and seat lining under climatic extremes
BMW QV 32020 / AK-LV 01 § 8.3.6 - Salt spray test BMW Quality Specification - Airbag-System; Airbag-module (installation location steering wheel, dashboard) - AK-LV 01 § 8.3.6.1: Salt spray test
BMW QV 51061 § 2.3.2.4 a) - Adhesion of anti friction coatings Sealing elements, flock- and anti friction coatings; § 2.3.2.4 a): Adhesion of anti friction coatings
BMW QV 51061 § 3.3.1 - Resistance to textile abrasion Sealing elements, flock- and anti friction coatings; § 3.3.1: Resistance to textile abrasion
BMW QV 51061 § 3.3.2 - Abrasion from a window glass pane edge Sealing elements, flock- and anti friction coatings; § 3.3.2: abrasion from a window glass pane edge
BMW QV 51061 § 3.3.5 - Abrasion resistance of anti-friction coating, gliding material across abrasive cloth Sealing elements, flock- and anti friction coatings; § 3.3.5: Abrasion resistance of anti-friction coating, gliding material across abrasive cloth
BMW QV 51061 § 3.5 - Peel off after icing Sealing elements, flock- and anti friction coatings; § 3.5: Peel off after icing
BMW QV 51154-3.2.2 (Peel adhesion pad, based on DIN 54310) - Peeling test QS Floor mats - Separation force between the backing and pad (based on DIN 54310)
BMW S 60300.0 Teil 4, § 3.11 (based on DIN 53428-F) - Water absorption Soft foams - Test method and acceptable tolerances; § 3.11: Water absorption (based on DIN 53 428 F: Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials)
BMW TL 7 376 096.6 § 3.3.1 - Welding grade BMW Specs EPP-Crashabsorber, § 3.3.1 Welding grade
BMW TS 100.1 § 4.2 - Decor adhesion Test specification; § 4.2: Decor adhesion
BMW-Net, Total elongation (based on DIN 53360) - Static and permanent elongation Determination of the total elongation (statical elongation) and permanent elongation / required for example in TL 9192340.6, § 3.3.3
BMW-Net, Total elongation at climate (based on DIN 53360) - Static and permanent elongation (climate cycle test) Determination of the total elongation at climatic cycle test (statical elongation) and permanent elongation at room temperature / required for example in TL 9192340.6, § 3.3.3
Bonded coating adhesion General method for determination of the bonded coating adhesion on elastomer seals by means of elongation on a universal testing device
Bow and skew measurement Standard test method for Bow and Skew in woven and knitted fabric - general method
Brasilien Res. CONTRAN 675 - Burning behaviour Regulations for materials which are used for lining the interior of vehicles and other provisions - Burning behaviour of interior materials
BS 1006 - Waterdrop test Color fastness to spotting: water
Buckling stress / crease test Buckling stress
Car wash test - Cleaning process of the total vehicle Total vehicle testing
Chamber emission test (by arrangement) Emission test with air change in the test chamber; Determination of volatile organic substances
Charpy impact strength - Determination of Charpy impact properties General method
Che He Jia Q/CHJCP061 - Determination of VOC Emissions Determination of VOC Emissions - Interieur
China GB 8410 - Burning behaviour Flammability of Automotive Interior Materials
Chrysler CLP 463KC-04-01 (Procedures 1 + 2A) - Soling and cleanability Cleanability and soilability tests - Procedure 1: Synthetic soilability for vinyl coated fabrics and leather; Procedure 2A: Cleanability - synthetic soil for vinyl coated fabrics and leather
Chrysler LP-463DD-18-01 (Mar) - Mar Resistance Mar Resistance of automotive plastics
Chrysler LP-463DD-18-01 (Scratch) - Scratch Resistance Scratch Resistance of automotive plastics
Chrysler LP-463KB-21-01 - Wear Resistance (Taber Method) Wear resistance of trim materials - Taber Method
Chrysler LP-463KB-22-01 - Resistance to "pull out" the tufts Tuft Lock Test for Tufted Carpets
Chrysler LP-463KC-04-01 Procedure 3A - General cleanability Cleanability and soilability tests - Procedure 3A: General cleanability of trim materials
Chrysler LP-463KC-21-01 - Perspiration Resistance Perspiration Resistance
Chrysler LP-463LB-10-01-A - Bond strength Bond strength of trim materials
Chrysler LP-463LB-11-01 Method A - Resistance to cold cracking (180° bend and crease test) Resistance to cold cracking of general trim materials, Method A : 108° bend and crease test
Chrysler LP-463LB-11-01 Method B - Resistance to cold cracking (Mandrel bend test) Resistance to cold cracking of general trim materials, Method C: Ball drop test
Chrysler LP-463LB-12-01-B - Humidity, hot and cold cycling Resistance to humidity hot and cold cycling of trim materials test, Method B
Chrysler LP-463LB-13-01 - Heat Aging Leather - Physical testing, Heat aging of Trim material
Chrysler LP-463PB-07-01 - Solvent wipe resistance test Solvent wipe resistance test
Chrysler LP-463PB-22-01 - Cycle testing Cycle testing of painted surfaces
Chrysler LP-463PB-22-01 Method IV - Cycle testing - Hot to Humidity to Cold Cycle testing of painted surfaces
Chrysler LP-463PB-31-01 - Resistance to various fluids Resistance of paint films to various fluids
Chrysler LP-463PB-31-01-B (Interior) - Spot test (Method B) Resistance of paint films to various fluids; Method B: Spot test
Chrysler LP-463PB-31-01-B (Interior) - Spot test (Method B) Resistance to various fluids; Method B: Spot test
Chrysler LP-463PB-31-01-D (Interior) - Suntan lotion test (Method D) Resistance of paint films to various fluids; Method D: Suntan lotion test
Chrysler LP-463PB-31-01-D (Interior) - Suntan lotion test (Method D) Resistance to various fluids; Method D: Suntan lotion test
Chrysler LP-463PB-31-01-F (Exterior/ Interior) - Water and soap spot test (Method F) Resistance of paint films to various fluids; Method F: Water and soap spot test
Chrysler LP-463PB-31-01-F (Exterior/ Interior) - Water and soap spot test (Method F) Resistance to various fluids; Method F: Water and soap spot test
Chrysler LP-463PB-31-01-H (Exterior/ Interior) - Acid Spot Test Resistance of paint films to various fluids, Method H: Acid spot test
Chrysler LP-463PB-31-01-H (Exterior/ Interior/ Underhood) - Acid Spot Test Resistance to various fluids, Method H: Acid spot test
Chrysler LP-463PB-31-01-J (Exterior/ Interior) - Solvent wipe resistance Resistance of paint films to various fluids, Method J - Solvent wipe resistance
Chrysler LP-463PB-31-01-J (Exterior/ Interior/ Underhood) - Solvent wipe resistance Resistance to various fluids, Method J - Solvent wipe resistance
Chrysler LP-463PB-31-01-K (Interior) - Air freshener resistance Resistance of paint films to various fluids; Method K: Air freshener resistance
Chrysler LP-463PB-31-01-K (Interior) - Air freshener resistance Resistance to various fluids; Method K: Air freshener resistance
Chrysler PF-10938 (Mar) - Mar Resistance Scratch and Mar - Resistance of Molded-In-Color Plastic Components
Chrysler PF-10938 (Scratch) - Scratch Resistance Scratch and Mar - Resistance of Molded-In-Color Plastic Components
Cigarette Test Cigarette Test (e.g. BMW PR 388)
Cleanability resistance textiles based on DBL 5399 Resistance of textiles to cleaning agents (based on DBL 5399.30)
Cleaning Cleaning (for example for out-door weathering)
Cleaning behaviour Cleaning behaviour
Climate cycle with infrared irradiation climate cycle with infared irridiation
Climate test / climate cycle Climate test / climate cycle
Climate test / climate storage Climate test / climate storage
CMVSS 302 - Burning behaviour Flammability of interior materials
Coefficient of friction (sticking/sliding friction) Determination of the coefficient of friction (sticking/sliding friction)
Cold behaviour Cold behaviour
Cold storage Cold storage
Colour fastness to artificial light
Colour fastness to rubbing (Gakushin) General test method - Colour fastness to rubbing with Gakushin type friction tester (eg. Nissan NES M0602 § 21 and 22)
Colour matching, visual Colour matching, visual
Compression set (acc. to drawing) Compression set (acc. to drawing)
Contact angle measurement Contact angle measurement
Contact discoloration (by foam) Contact discoloration (by foam), e.g. BMW QV 52009
Corrosion creep (based on DIN EN ISO 4628-8) - Assessment of degree of delamination and corrosion around a scribe Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (infiltration)
Crease Flex - Ravel Resistance Crease Flex; Ravel Resistance
Cross-cut (X cut) Cross-cut (X cut)
Curling Curling
D41 1286 - Reißfestigkeit
DAF KEUR 00821-020 - Dimensional stability Plastic parts - Dimensional stability of plastic parts at elevated temperatures without external mechanical loading
DAF KEUR 00821-024 - Resistance to rotting (Fungoid growth) Fungoid growth on interior panels
DAF KEUR 00821-027 - Mar resistance Determining the scratch resistance of various surfaces
DAF KEUR 00822-101 § 6.1.1 - Determination of the mass Covering materials - Determination of the mass § 6.1.1 Total mass
DAF KEUR 00822-101 § 6.1.3.1 / 6.1.3.2 - Determination of the mass Cover materials - Determination of the mass § 6.1.3.1 Procedure for the fabric layers / 6.1.3.2 Procedure for the foam layer
DAF KEUR 00822-102 - Tensile test Covering Materials - Determination of the elongation under load and the permanent elongation
DAF KEUR 00822-104 - Determination of the tearing strength Covering Materials - Determination of the tearing strength
DAF KEUR 00822-106 - Determination of adhesion Covering materials - Determination of the adhesion
DAF KEUR 00822-107 - Colour fastness to light Covering materials - Determination of the colour fastness to light
DAF KEUR 00822-108 - Colour fastness to rubbing Covering materials - Determination of the colour fastness to rubbing
DAF KEUR 00822-113 - Shrinkage by moisture Covering materials - Determination of the shrinkage caused by the influence of moisture
DAF KEUR 00822-114 - Resistance to water Covering materials - Determination of the resistance to water
DAF KEUR 00822-115 - § 6.1 Method 1 - Determination of resistance to ageing - Visual assessment Covering Materials - Determination of Resistance to Ageing, § 6.1 Method 1 (Visual Assessment of the Top Layers)
DAF KEUR 00822-115 - § 6.2 Method 2 - Determination of resistance to ageing - Stiffness of the foam Covering Materials - Determination of Resistance to Ageing, § 6.2 Method 2 (Stiffness of the Foam)
DAF KEUR 00822-116 - Resistance to wear (Taber) Covering materials - Determination of the resistance to wear
DAF KEUR 00822-120 - Determination of the fogging Determination of the fogging of plastics (reflectometric)
DAF KEUR 00822-123 - Determination of indentation hardness Determination of indentation hardness (soft feel) of cab interior materials
DAF KEUR 00824-101 - Gloss measurement Measurement of the gloss
DAF KEUR 00824-401 - Cross-cut test Determination of the adhesion of coats of paint on painted parts (cross-cut test)
DAF KEUR 00824-818 - Resistance to test media Resistance to environmental influences, resistance to momentary attacks by automotive fluids. (Drip, cotton wool, or immersion test)
DAF KEUR 00824-825 - Resistance to perspiration Parts and components - Determination of the resistance to attack by perspiration
DAF KEUR 0822-103 - Static and permanent elongation Covering materials - Determination of the elongation under load and the permanent elongation
DAF MAT 46811/46812 Hardness - Determination of hardness Thermoforming interior parts - hardness
Daimler - Residual Flock Test Daimler Technical Component Requirement Specifications Instrument Panel (I-Panel) with Glove Box (HSK), e.g.: QEV111AF4KQP § 2.1.7.1.4.7.4 (issue 2015-03) // QEV111AHSP9D § 2.1.6.1.4.4.8 (issue 2018-07)
Daimler A21.10.01, § 4.6 - Tread resistance Standard function test program - Flooring / function, § 4.6 Tread resistance
Daimler AG PAPP PWT 7517 - Determination of nitrosamine emission Measuring the emission of nitrosamines from elastomeric parts used in the passenger compartment
Daimler DBL 5306 § 1.1 - Bending stiffness General technical delivery conditions and test methods for interior equipment materials and similar products; § 1: bending stiffness
Daimler DBL 5306 § 15.2 - Grip indentation measurement General technical delivery conditions and test methods for interior equipment materials and similar products; § 15.2: Grip indentation measurement
Daimler DBL 5306 § 16 (machine) - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 16 (manually) - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 16 - Foam adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 16: Foam adhesion
Daimler DBL 5306 § 19.3 - Coefficient of friction with sliding/sticking friction General technical delivery conditions and test methods for interior equipment materials and similar products; § 19.3: Coefficient of friction with sliding/sticking friction
Daimler DBL 5306 § 2 - Resistance to blocking General technical delivery conditions and test methods for interior equipment materials and similar products; § 2: Resistance to blocking
Daimler DBL 5306 § 20 - Contact staining General technical delivery conditions and test methods for interior equipment materials and similar products; § 20: Contact staining
Daimler DBL 5306 § 25 - Tear-out resistance General technical delivery conditions and test methods for interior equipment materials and similar products; § 25: Tear out resistance; Stitch tear resistance (§ 25.1) or selvege thread pull-out resistance (§ 25.2)
Daimler DBL 5306 § 26.1.1 - Peel adhesion General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.1: Peel tensile test in standard atmosphere
Daimler DBL 5306 § 26.1.3 - Shear tensile test in standard atmosphere General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.3: Shear tensile test in standard atmosphere
Daimler DBL 5306 § 26.1.4 - Shear tensile test under heat General technical delivery conditions and test methods for interior equipment materials and similar products; § 26.1.4: Shear tensile test under heat
Daimler DBL 5306 § 3.1 - Resistance to scratching (with fingernail) General technical delivery conditions and test methods for interior equipment materials and similar products; § 3.1: scratch resistance (fingernail or knife blade)
Daimler DBL 5306 § 3.2 - Exposure to scratching with a chisel General technical delivery conditions and test methods for interior equipment materials and similar products; § 3.2: Exposure to scratching with a chisel
Daimler DBL 5306 § 4.1 (DIN EN ISO 105-X12) - Abrasion resistance General technical delivery conditions and test methods for interior equipment materials and similar products; § 4.1: Abrasion resistance
Daimler DBL 5306 § 6.1 - Heat resistance - Loose exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 6.1: Heat resistance - Loose exposure
Daimler DBL 5306 § 6.2 - Heat resistance - folded exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 6.2: Heat resistance - folded exposure
Daimler DBL 5306 § 7.1 - Cold resistance - folded exposure General technical delivery conditions and test methods for interior equipment materials and similar products; § 7.1: Cold resistance - folded exposure
Daimler DBL 5306 § 7.2 - Cold resistance - bending exposure Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 7.2: Cold resistance - bending exposure
Daimler DBL 5306 § 7.3 - Cold resistance - ball drop test Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 7.3: Cold resistance - ball drop test
Daimler DBL 5306 § 8.1 - Permanent deformation after constant load - dry method Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 8.1: Permanent deformation after constant load - dry method
Daimler DBL 5306 § 8.2 - Permanent deformation - wet method General technical delivery conditions and test methods for interior equipment materials and similar products; § 8.2: Permanent deformation after constant load
Daimler DBL 5306 § 9.3 - Soiling behaviour (Martindale method, standard soiling material) Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 9.3: Soiling behaviour (Martindale method)
Daimler DBL 5306 § 9.4 - Cleaning behaviour Gereral technical delivery conditions and test methods for interior equipment materials and similar products; § 9.4: Cleaning behaviour
Daimler DBL 5307 § 5.1 - Flame retardant properties Supply Specification - Flame retardant properties - Interior trim parts - Requirements and test specifications; § 5.1: Test for determination of the horizontal burning rate of materials
Daimler DBL 5307 § 6.1 - Flame retardant properties Supply specification - flame retardant properties - Interior trim parts - requirements and test specifications; § 6.1: Test for determination of the horizontal burning rae of materials
Daimler DBL 5307 § 6.1 - Flame retardant properties Supply specification - flame retardant properties - Interior trim parts - requirements and test specifications; § 6.1: Test to determine horizontal burning rate of materials
Daimler DBL 5307 § 6.3 - Melting behavior Flame retardant properties - Interior trim parts - Requirements and test specifications; § 6.3: Test for determination of the melting bahavior of materials
Daimler DBL 5310 § 8.5 - Resistance to cleaning and care products DBL 5310 - Leder für Innenausstattung: § 8.5 Reinigungsfähigkeit und Pflegemittelbeständigkeit
Daimler DBL 5348 § 7.33 - Contact staining - determination of colour change in defined amine atmosphere Foamed and Compact Artificial Leather - § 7.33 Contact staining - determination of colour change in defined amine atmosphere
Daimler DBL 5399 § 3.2 - Resistance to cleaning and care products Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.2: Resistance to cleaning and care products
Daimler DBL 5399 § 3.3 + 3.4 (Martindale) - Soiling and Cleaning behaviour Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.3 and § 3.4: Soiling and cleanability behaviour (Martindale)
Daimler DBL 5399 § 3.3 + 3.4 - Soiling and Cleaning behaviour Supply specification - soiling / cleaning of interior trim parts /-materials; § 3.3 and § 3.4: Soiling and cleanability behaviour
Daimler DBL 5404 § 18.7 - Scratch resistance Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 18.7: Scratch resistance, followed by colour measurement
Daimler DBL 5404 § 4.2 - Resistance to care products Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 4.2: Resistance to care products
Daimler DBL 5404 § 7.14 - Resistance to cosmetics Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 7.14: Resistance to cosmetics
Daimler DBL 5404 § 7.15 - Resistance to care agents Parts made of thermoplastics for the direct and indirect areas of the passenger compartment; § 7.15: Resistance to care agents
Daimler DBL 5471(AA90-95) § 4.11 - Resistance to abrasion (DIN EN ISO 105-X12) Supply specification - trim panels and molded padded parts for vehicle interiors (compound parts); § 4.11 - Resistance to abrasion (DIN EN ISO 105-X12)
Daimler DBL 5527 - Prevention of galvanic corrosion Supply Specification - Elastomer materials with reduced conductivity (to avoid contact corrosion )
Daimler DBL 5555-II-6.2 (based on DIN EN ISO 4892) - Artificial weathering Supply specification - Finished parts and semi-finished products made of organic polymer materials; § 6.2: artificial weathering (based on DIN EN ISO 4892)
Daimler DBL 5555-II-6.4 - Steam jet test DC, Steam jet test
Daimler DBL 5575 § 10.1 - Abrasion resistance (Crockmeter) Supply specification, Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior, § 10.1 Abrasion resistance (Crockmeter) (for AA 10 / 20 / 21)
Daimler DBL 5575 § 10.2 - Abrasion resistance (Crockmeter) Supply specification, Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior, § 10.2 Abrasion resistance (Crockmeter) (for AA 22)
Daimler DBL 5575 § 6.5.1 - Abrasion resistance (Crockmeter) Supply specification, Textile flocked elastomer parts for body sealants and plastic parts for the vehicle interior, § 6.5.1 Abrasion resistance (Crockmeter)
Daimler DBL 5578 (Steam jet test) - Coating adhesion after Steam jet test Supply Specification - Elastomer parts with anti-friction coating: Steam jet test
Daimler DBL 5578 § 8 / § 8.1 (crockmeter) - Abrasion test, crockmeter Elastomer parts with anti-friction coating - § 8: Abrasion test using a crockmeter / § 8.1: Abrasion on wetted rubbing fabric
Daimler DBL 5578 § 8 / § 8.2 (profile edge) - Abrasion test over profile edge Elastomer parts with anti-friction coating - § 8: Abrasion test using a crockmeter / § 8.2: Abrasion on profile edge
Daimler DBL 5578, Tab. 2, 4.11 (crockmeter) - Abrasion test, crockmeter Supply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion test, crockmeter
Daimler DBL 5578, Tab. 2, 4.11 (profile edge) - Abrasion test over profile edge Supply Specification, elastomer parts with anti-friction coating; Tab. 2, 4.11: Abrasion test over profile edge
Daimler DBL 7382 § 9.13 - Evaluation of corrosion grade, surface corrosion Supply specification - Coating of metallic parts in vehicle interiors: § 9.13: Evaluation of corrosion grade, surface corrosion
Daimler DBL 7382 § 9.14 - Evaluation of corrosion grade, edge corrosion Supply specification - Coating of metallic parts in vehicle interiors: § 9.14: Evaluation of corrosion grade, edge corrosion
Daimler DBL 7382 § 9.16 - Subsurface corrosion around a scribe Supply specification - Coating of metallic parts in vehicle interiors: § 9.16: Subsurface corrosion around a scribe
Daimler DBL 7382 § 9.7 - Scratch test with knife Supply specification - Coating of metallic parts in vehicle interiors; § 9.7: Scratch test with knife
Daimler DBL 7384 - Outdoor weathering - Florida weathering Supply Specification - Coating of Plastic Parts in Vehicle Interiors Weathering (Florida test - Outdoor weathering)
Daimler DBL 7392 § 5.2 - Scratching with knife Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.2: Scratching with a knife
Daimler DBL 7392 § 5.4 - Subsurface corrosion around a scribe Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.4 - Corrosion creep around a scribe
Daimler DBL 7392 § 5.5 - Evaluation of degree of rusting, surface corrosion Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.5 - Evaluation of degree of rusting, surface corrosion
Daimler DBL 7392 § 5.7 - Evaluation of degree of rusting, edge corrosion Supply specification - Coating/varnishing for parts with moderate corrosion stress; § 5.7 - Evaluation of degree of rusting, edge corrosion
Daimler DBL 7399 § 5.1 - Scratching with knife Supply specification - Enamels, paints and similar coating materials and associated coatings; § 5.1: Scratching with knife
Daimler DBL 7399 § 6.1 - Visual comparision of gloss according to standard samples Supply specification - Enamels, paints and similar coating materials and associated coatings; § 6.1: Visual comparision of gloss according to standard samples
Daimler DBL 7399 § 7.5.1 - Weathering in central European climate Supply specification - Enamels, paints and similar coating materials and associated coatings; § 7.5.1 Weather resistance - Weathering in central European climate
Daimler DBL 7399 § 7.5.2 - Florida test Supply specification - Enamels, paints and similar coating materials and associated coatings; § 7.5.2 Weather resistance - Florida test
Daimler DBL 7401, Table 2, § 1.2, 2.2 and 2.4 - Visual comparison of color, luster and haze with color template Color, luster and haze
Daimler DBL 9202 § 3.5 - Adhesion test (adhesive tape method) Supply Specification - Decorative parts in vehicle interiors; § 3.5: Adhesion test (adhesive tape method)
Daimler DBL 9202 § 4.1.1 - High-temperature storage Supply Specification - Decorative parts in vehicle interiors; § 4.1.1: High- temperature storage
Daimler DBL 9202 § 4.1.2 - Temperature cycling Supply Specification - Decorative parts in vehicle interiors; § 4.1.2: Temperature cycling
Daimler DBL 9202 § 4.1.3 - Climatic storage Supply Specification - Decorative parts in vehicle interiors; § 4.1.3: Climatic storage
Daimler DBL 9202 § 4.1.9 - Resistance tests Supply Specification - Decorative parts in vehicle interiors; § 4.1.9: Resistance tests (Resistance to cleaning/care products)
Daimler MBN 10473-1 - Color measurement (CIELAB) Measurements of Colors
Daimler MBN 10494-4 § 5.1 - Gloss measurement using a reflectometer Paint test methods - Part 4: Optical tests § 5.1 Gloss measurement using a reflectometer
Daimler MBN 10494-5 § 5.1.1 - Manual scratch test (with a knife) Paint test methods - Part 5: Technical-mechanical tests
Daimler MBN 10494-5 § 5.1.2 - Adhesion test with additional adhesive tape pull-off Paint test Methods - Part 5: Technical-mechanical tests § 5.1.2 Adhesion test with additional adhesive tape pull-off
Daimler MBN 10494-5 § 5.2.1 - Stone-chip resistance (Multi-impact test, method B) Paint Test Methods - Part 5: Technical-Mechanical Tests, § 5.2.1 Multi-impact test, method B
Daimler MBN 10494-5 § 5.8.1 - Car-wash scratch resistance Paint Test Methods - Part 5: Technical-Mechanical Tests; § 5.8.1 Car-wash scratch resistance: Amtec Kistler test
Daimler MBN 10494-5 § 5.8.2 - Wiping scratch resistance: crockmeter test Testing the scratch resistance of coatings with the crockmeter
Daimler MBN 10494-5 § 5.8.2 - Wiping scratch resistance: crockmeter test Testing the scratch resistance of coatings with the crockmeter
Daimler MBN 10494-5 § 5.9 - Mar resistance according to Oesterle Paint Test Methods - Part 5: Technical-Mechanical Tests § 5.9
Daimler MBN 10494-6 § 5.11.1 (in analogy with DIN EN ISO 4628-8) - Assessment of subsurface corrosion around a scribe mark Paint test Methods - Part 6: Climatic Tests, § 5.11.1 Subsurface corrosion around a scribe mark, code U/2
Daimler MBN 10494-6 § 5.4.1 (DIN EN ISO 11997-1, cycle B) - Corrosion cycle test 1 Paint Test Methods – Part 6: Climatic Tests - § 5.4.1: Corrosion cycle test 1 (as per DIN EN ISO 11997-1 cycle B)
Daimler MBN 10494-6 § 5.8.1 - Resistance to weathering - Florida test Paint Test Methods - Part 6: Climatic Tests - Resistance to weathering - Florida test
Daimler MBN 10494-6 § 5.8.2 - Weathering in central European climate Paint Test Methods - Part 6: Climatic Tests; § 5.8.2 Resistance to weathering - Weathering in central European climate (Outdoor weathering)
Daimler MBN 10494-6 § 5.9.1 - Artificial weathering - CAM 180 Artificial weathering - CAM 180
Daimler MBN 10494-7 § 5.1 - Resistance to chemicals: Temperature-gradient oven test method Paint test Methods - Part 7: Resistance to Chemicals, Test Mixtures and test Concentrates, § 5.1 Resistance to chemicals: temperature-gradient oven test method
Daimler MBN 10494-8 § 5.4 - Compatibility test after aging of the assembly and transport protection Paint Test Methods - Part 8: Adhesion of Adhesives on the Coating
Daimler MBN 10505 (Florida-Mode) - Weathering in a Humid Climate Non-Metallic Materials - Weathering in a Humid Climate
Daimler MBN 10506 (Kalahari-Mode) - Weathering in Dry and Hot Climates Non-Metallic Materials - Weathering in Dry and Hot Climates
Daimler MBN 10518 § 6.7 (based on DIN EN ISO 9142 - cyclical aging) - Alternating hot climate aging Test Specifications for Ensuring the Adhesion of Assembly Bonds, § 6.7 Alternating hot climate aging
Daimler MBN 10526 § 6.1 - Peel-off resistance Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.2 - Peel-off resistance Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.2 - Shear holding time Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.3 - Peel-off resistance Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.3 - Shear holding time Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10526 § 6.4 - Shear holding time Determining the adhesive strength of adhesive tapes and foils for self-adhesive components
Daimler MBN 10529 Annex A.2 - TnP test Electroplating-Compatible Design of Plastic Interior Components - Annex A, Test for inner stress of the carrier parts; A.2 TnP test
Daimler MBN 15306-1 § 5.1 - Warm climate cycle test Test methods for material systems and components - part 1: Thermal tests § 5.1 warm climate cycle test
Daimler MBN 15306-1 § 5.2 quick feed - Warm climate cycle test Test methods for material systems and components - Part 1: Thermal tests § 5.2 warm climate cycle test / quick feed
Daimler MBN 15306-1 § 5.3 dimensional change test - Warm climate cycle test Test methods for material systems and components - Part 1: Thermal tests § 5.3 warm climate cycle test / dimensional change test
Daimler MBN 15306-1 § 5.4 - Thermal aging Test methods for material systems and components - Part 1: Thermal tests § 5.4 Thermal aging test
Daimler MBN 15306-1 § 5.5 - Climate test Test Methods for material systems and components - part : Thermal tests§ 5.5 Climate test
Daimler MBN 15306-1 § 5.6 - Low-temperature test Test methods for material systems and components - Part 1: Thermal tests § 5.6 low-temperature test
Daimler MBN 15306-3 § 5.15 - Scratch resistance (against fingernail or knife blade) Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.15 Exposure to scratches
Daimler MBN 15306-3 § 5.16 - Heat resistance - folded exposure Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.16 Heat resistance - folded exposure
Daimler MBN 15306-3 § 5.19 - Cold resistance - ball drop test Test methods for material systems and components - Part 3: Mechanical tests § 5.19 Cold resistance - ball drop test
Daimler MBN 15306-3 § 5.21 - Coefficient of gliding/ sticking friction Test Methods for Material Systems and Components - Part 3: Mechanical tests, § 5.21 Coefficient of friction
Daimler MBN 15306-4 § 5.2 / DIN EN ISO 11640 - Colour fastness (Veslic abrasion) Test methods for material systems and components - Part 4: resistance tests - § 5.2 Abrasion resistance to sun cream test substance - for leather Veslic as per DIN EN ISO 11640
Daimler MBN 15306-5 § 5.1 - Heat resistance - Loose exposure Test methods for material systems and components - Part 5: Other tests § 5.1 Heat resistance - loose exposure
Daimler MBN 161216 - Bending test Determination of bending properties of sandwich composites
Daimler MBN 55555-3 § 5.1 - Heat resistance - Loose exposure Non-metallic materials, material systems and semifinished products Part 3: Other tests § 5.1 Heat resistance - loose exposure
Daimler MBN 55555-3 § 5.2 - Table 4 - Drop test Daimler MBN 55555-3 § 5.2 - Cleanability following soiling, Table 4: Test matrix for material and grain development tests, fluid AM (soiling agents)
Daimler MBN 55555-3 § 5.9 - Measurement of Instrument panel in the area of the passenger airbag Non-metallic materials, material systems and semifinished products Part 3: other tests § 5.9 Measurement of Instrument panel in the area of the passenger airbag
Daimler MBN 55555-4 § 5.1 WCC - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.1Warm climate cycle test (WCC)
Daimler MBN 55555-4 § 5.1 WKW - Warm climate cycle test Non-metallic materials, material systems and semi-finished products Part4: Thermal tests
Daimler MBN 55555-4 § 5.2 WCC / WKW / Quick feed - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.2 Warm climate cycle test (WCC) / Quick feed
Daimler MBN 55555-4 § 5.3 WCC / WKW / dimensional change test - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.3 Warm climate cycle test (WCC) / dimensional change test
Daimler MBN 55555-4 § 5.4 WCC / natural skin leather test - Warm climate cycle test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.4 warm climate cycle test (WCC) / Natural skin leather test
Daimler MBN 55555-4 § 5.4 WKW / Natural skin leather test - Warm climate cycle test Non-metallic materials, material systems and semi-finished products Part 4:Thermal tests § 5.4 Warm climate cycle test (WKW) / natural skin leather test
Daimler MBN 55555-4 § 5.4 WKW / natural skin leather test 4 - Warm climate cycle test / Natural skin leather test with humidity and radiation for instrument panel Non-metallic materials, material systems and semi-finished products Part 4:Thermal tests § 5.4 Warm climate cycle test (WKW) / natural skin leather test 4 - for Instrument panel
Daimler MBN 55555-4 § 5.5 WA - Thermal aging test Non-metallic materials, material systems and semifinished products part 4: Thermal tests § 5.5 Thermal aging test (WA)
Daimler MBN 55555-4 § 5.5 WA - Thermal aging test Non-metallic materials, material systems and semifinished products part 4: Thermal tests § 5.5 Thermal aging test (WA)
Daimler MBN 55555-4 § 5.6 KL - Climate test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.6 Climate test (KL)
Daimler MBN 55555-4 § 5.7 KP - Low-temperature test Non-metallic materials, material systems and semifinished products Part 4: Thermal tests § 5.7 low-temperature test (KP)
Daimler MBN 55555-4 § 5.8 ( high temperature storage and in the dark) - high temperature storage and in the dark non-metallic materials, material systems and semi-finished products Part 4: Thermal tests § 5.8 Surface inspection after storage at high temperature and in the dark
Daimler MBN 55555-5 § 5.1 (VDA 230-219-D) - Sun simulation component (long term testing) Non-metallic materials, material systems and semifinished products - Part 5: Weathering Tests § 5.1: Sun simulation component
Daimler MBN 55555-5 § 5.4 (Florida mode) - Artificial weathering in a humid climate Non-metallic materials, material systems and semi-finished products, Part 5: Weathering Tests, § 5.4 Artificial weathering in a humid climate
Daimler MBN 55555-5 § 5.4 (Kalahari mode) - Artificial weathering in a dry-hot climate Non-metallic materials, material systems and semi-finished products, Part 5: Weathering Tests, § 5.4 Artificial weathering in a dry-hot climate
Daimler MBN 55555-6 § 5.1 - Scratch resistance (against fingernail or knife blade) Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.1 Exposure to scratches
Daimler MBN 55555-6 § 5.10 - Coefficient of slding/ adhering friction Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.10 Coefficient of friction
Daimler MBN 55555-6 § 5.12 - Heat resistance - folded exposure Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.12 Heat resistance - folded exposure
Daimler MBN 55555-6 § 5.14 - Cold resistance - bending exposure Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.14 Cold resistance - Bending exposure
Daimler MBN 55555-6 § 5.15 - Bending resistance Non-metallic materials, material systems and semifinished products - Part 6: Mechanical Tests; § 5.15 Bending resistance
Daimler MBN 55555-6 § 5.16 - Determination of Shore L hardness Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.16 Hardness test
Daimler MBN 55555-6 § 5.17 - Cold resistance - ball drop test Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.17 Ball drop test
Daimler MBN 55555-6 § 5.18 - Pull-out-strength - Selvedge thread pullout force Non-metallic materials, material systems and semifinished products - Part 6: Mechanical Tests; § 5.18
Daimler MBN 55555-6 § 5.2 - Scratch resistance with a chisel Non-metallic materials, material systems and semi-finished products Part 6: mechanical tests § 5.2 scratching of surface using a chisel
Daimler MBN 55555-6 § 5.23 - Four-point bending test Non-metallic materials, material systems and semi-finished products, Part 6: Mechanical Tests, § 5.23 Determination of the bending properties of the microsandwich
Daimler MBN 55555-6 § 5.24 (based on DIN EN 1372) - Peel test for decorative goods (roller peel test) Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.24 Peel test for decorative goods
Daimler MBN 55555-6 § 5.26 - Foam adhesion Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.26 Foam adhesion at interface between foam and substrate
Daimler MBN 55555-6 § 5.6 - Abrasion test with metal heels Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.6 Chafe teyst with steel heels
Daimler MBN 55555-6 § 5.7 - Abrasion Abrasion resistance of the flock
Daimler MBN 55555-6 § 5.8 (DIN EN ISO 105-X12) - Abrasion resistance with the crockmeter (friction fabric) Non-metallic materials, material systems and semifinished products - Part 6: Mechanical Tests; § 5.8 Abrasion resistance with the crockmeter (friction fabric)
Daimler MBN 55555-6 § 5.8 - Abrasion resistance Non-metallic materials, material systems and semifinished products Part 6: Mechanical tests § 5.8 Abrasion resistance with the crockmeter (friction fabric) Method A
Daimler MBN 55555-7 § 5.1 - Color changes in defined amine atmosphere Non-metallic materials, material systems and semifinished products Part 7: resistance tests § 5.1 Color changes of materials in defined amine atmosphere
Daimler MBN 55555-7 § 5.2 - Resistance against suncream Non-metallic materials, material systems and semifinished products Part 7: Resistance tests § 5.2 Abrasion resistance to sun cream test substance
Daimler MBN 55555-7 § 5.3 - Resistance to sun cream through contact Non-metallic materials, material systems and semifinished products Part 7: Resistance tests § 5.3 Resistance to sund cream test substance through contact
Daimler MBN 55555-7 § 5.4 - Resistance to care agents Non-metallic materials, material systems and semifinished products Part 7: Resistance tests
Daimler MBN 55555-8 § 5.2 / ISO 7270-1 and ISO 7270-2 - Pyrolysis-GC-MS Non-metallic materials, material systems and semi-finished products, Part 8: Analytical tests, § 5.2 Pyrolysis of extracts of elastomers and plastics
Daimler MS-JP-9-4 - Flammability in condition as delivered Flammability testing of interior materials
Daimler PA PP PWT 3640 (without sample preparation) - Tensile shear strength Determination of the tensile shear strength of single-shear overlapped bonding (tensile shear test in accordance with DIN EN 1465)
Daimler PA PP PWT 3668 - Static shearing force Determination of the static shearing force of bonded components
Daimler PA PP PWT 3668 - Static shearing force Determination of the static shearing force at bonded components
Daimler PA PP PWT 7328 - Resistance against sunscreen Resistance of interior materials against sunscreen
Daimler PA PP PWT 7333 Method B - Heating behavior of materials Heating behavior of materials
Daimler PAPP PWT 7301 - Abrasion test with a steel heel Abrasion test with a steel heel
Daimler PAPP PWT 7329 - Colour change in defined amine atmosphere Colour change of automotive interior material in defined amine atmosphere
Daimler PB VWL 301 - Abrasion test with metal heels Abrasion test with metal heels
Daimler PB VWL 323 - Determination of the abrasion resistance of the pile Determination of the abrasion resistance of the pile - Test instruction
Daimler PB VWT 217 - Corrosion test Corrosion testing of vehicle interior trim - Test instruction
Daimler PBODC 371 - Resistance to chemicals Daimler: Resistance to chemicals
Daimler PBODC390 - Scratch resistance of coatings with Crockmeter Determination of the scratch resistance of coatings with Crockmeter
Daimler PV EP/AIS § 7.4.1 - Sun simulation (long term test) Test standard seats - environmental situation; § 7.4.1: Sun simulation
Daimler, optical surface measurement - Measurement of Instrument panel in the area of the airbag weakening MB - Measurement of Instrument panel in the area of the airbag weakening
DaimlerChrysler LP-463DB-12-01 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging Resistance of Interior Materials
DaimlerChrysler LP-463DB-12-01 (Fogging G) - Determination of the fogging characteristics (Fogging G) DaimlerChrysler, Fogging Resistance of Interior Materials
Damage analysis Damage analysis
DBL 5310 § 7.11 - Color stability Leather for interior - Color stability
DBL 5310 § 7.27 - Color stability Leather for interior equipment, § 7.27 Color stability for sun-reflective leather versions
DBL 5578, Tab. 2, 4.12.4 / LV 28 (Florida-Modus) - Resistance to weathering (humidity-warm climate, e.g. Florida) Supply specification - Elastomer parts with anti-friction coating; Table 2, 4.12.4: Artificial weathering - Exterior application - Florida-Modus
DBL 5578, Tab. 2, 4.12.4 / LV 28 (Kalahari-Modus) - Resistance to weathering, dry-hot climate, e.g. Kalahari, Arizona, South America Supply specification - Elastomer parts with anti-friction coating; Table 2, 4.12.4: Artificial weathering - Exterior application - Kalahari-Modus
DBL 7403 § 7.3/ CEN/TS 1071-8:2004 - Determination of Rockwell hardness Decorative coating of metallic interior components with plasma or vacuum deposition (e.g. PVD) / Rockwell indentation testing of ceramic coatings
Decomposition by melting Decomposition by melting, various
Density (immersion method) General method to determine the density (immersion method)
Determination of density (volume test equipment) Determination of density (volume test equipment)
Determination of extractable components Determination of extractable components
Determination of hardness / penetration depth (Ball indentation method) general method - Determination of hardness with Bauchometer MPE II
Determination of operating forces Determination of operating forces
Determination of prohibited substances - Extraction and HPLC/DAD analysis Prohibited substances, e.g. TBBA
Determination of static and permanent elongation Determination of static and permanent elongation
Determination of static elongation
Determination of stiffness General method for the determination of the stiffness
Determination of the pile height Textile - Determination of the pile height (manually - measurement with a steel ruler)
Dielectric properties - Determination of the loss factor (tan δ) Investigation of the dielectric spectrum of solid materials
Dimensional analysis, wet chemistry (volumetry) Dimensional analysis, wet chemistry (volumetry)
Dimensional change Dimensional change acc. to customer requirements
Dimensional stability at applying temperature load Dimensional stability at applying temperature load; Deformation, max; Deformation, permanent
Dimensional stability at pressure load Dimensional stability at pressure load; deformation, max; deformation, permanent
Dimensional stability at tensile load Dimensional stability at tensile load; deformation, max; deformation,permanent
DIN 18035-7 § 7.7.1 - Exposure to hot water Sports grounds - Part 7: Synthetic turf areas; § 7.7.1: Exposure to hot water
DIN 18035-7 § 7.7.2 - Exposure to heat Sports grounds - Part 7: Synthetic turf areas; § 7.7.1: Exposure to heat
DIN 18035-7 § 7.9 - Transverse tensile strength Sport grounds - Part 7: Synthetic turf areas; § 7.9: Determination of transverse tensile strength
DIN 19528 - Leaching of solid materials (percolation method)) Leaching of solid materials - Percolation method for the joint examination of inorganic and organic substances (quick colomn test)
DIN 3415-1&2 - Textile touch and close fasterners Textile touch and close fasterners; requirements and test methods
DIN 3419-1 - Determination of various strengths on slide fasteners Slide fasteners - Part 1: Technical delivery conditions
DIN 3761-14 - Pyrolysis-IR Rotary shaft lip type seals for automobils - Test - Infrared-spectroscopic analysis of elastomers
DIN 38407-F14, based on - Determination of phenoxy-alkane carboxylic acids German standard methods for the examination of water, waste water, and sludge - Jointly determinable substances ( group F ) part 14: Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrome-tric detection after solid - liquid extraction and derivatization ( F 14 )
DIN 38409-H23-2 - Determination of bismut active substances German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of bismut active substances (H 23) ;DRAGENDORFF-REAGENZ (BiAS)
DIN 38414-14 - Determination of polyfluorinated compounds German standard methods for examination of water, waste water and sludge - sludge and sediments (group S9 - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS)
DIN 40050-9 - Degree of protection (IP-code) of electrical equipment Road vehicles - degrees of protection (IP code) - protection against foreign objects, water and contact, electrical equipment
DIN 4102-1, building material class B2 - Surface and edge flame exposure Fire behaviour of building materials and building components - Part 1: Building materials, terminology, requirements and tests
DIN 50017-KFW - Condensation-water climate with alternating humidity and air temperature Climates and their technical application, condensated water containing climates with alternating humidity and temperature
DIN 50017-KK - Condensation-water atmosphere with constant humidity Climates and their technical application, condensated water containing climates (constant climate)
DIN 50017-KTW - Condensation-water climate with alternating air temperature Climates and their technical application, condensated water containing climates with alternating temperatures
DIN 50018 - Condensation water alternating climate with sulfur dioxide-containing atmosphere Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN 50018 - Testing in a saturated atmosphere in the presence of sulfur dioxide Testing in a saturated atmosphere in the presence of sulfur dioxide
DIN 50021-CASS - Copper chloride / acetic acid salt spray fog test Spray tests with different sodium chloride solutions (CASS: copper chloride / acetic acid salt spray fog test)
DIN 50021-SS - Salt spray fog test Spray tests with different sodium chloride solutions (SS: Salt spray fog test)
DIN 50958 - Modified Corrodkote corrosion test (mod. Corr-Test) Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)
DIN 51007 - Differential Thermal Analysis (DTA) Thermal Analysis - Differential Thermal Analysis - Principles
DIN 51045-1 - Determination of the linear thermal expansion Determination of the linear thermal expansion
DIN 51084-C (based on) - Determination of fluoride content Testing of oxidic raw materials for ceramic, glass an glazes - Determination of fluoride content (Procedure C)
DIN 51558-2 Testing of mineral oils; determination of neutralization number; Color-indicator titration - insulatuing oils
DIN 51718 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51721 Testing of solid fuels - Determination of carbon content and hydrogen content - Radmacher-Hoverath method
DIN 51722-1 Testing of solid fuels - Determination of nitrogen content - semi-micro Kjeldahl method
DIN 51724-1 Testing of solid fuels - Determination of sulfur content - Part 1: Total sulfur
DIN 51732 - Determination of total carbon, hydrogen and nitrogen Draft version: Testing of solid mineral fuels - determination of total carbon, hydrogen and nitrogen - instrumental methods
DIN 51732-N Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen (here nitrogen) - Instrumental methods
DIN 51757, procedure 2 (hydrostatic weighing) - Density Testing of mineral oils and related materials; determination of density
DIN 52182 - Determination of apparent density Testing of wood - Determination of density
DIN 52350 - Determination of thickness, basis weight and density Testing of wood fiber boards - sampling, thickness measurement, determination of the basis weight and density
DIN 52351 § 1. - Determination of the humidity Testing of woodfiber plates - Determination of the humidity, water absorption and thickness swelling, § 1.: Determination of the humidity
DIN 52351 § 2. - Determination water absorption and thickness swelling Testing of woodfiber plates - Determination of the humidity, water absorption and thickness swelling, § 2.: Determination water absorption and thickness swelling
DIN 52616 - Determination of thermal conductivity Heat Resistance Test - Determination of thermal conductivity with the heat flow meter apparatus
DIN 53019-1 - Viscosities (with rotations viscosimeter) Viscometry - Measurement of viscosities and flow curves by mean of rotational viscometers - Part 1: Principles and measuring geometry
DIN 53100 § 7.5 (appendix D) - Temperature cycling test Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials; § 7.5: Thermal cycle test (appendix D)
DIN 53100, Appendix F - Glacial acetic acid test Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastic materials - Appendix F: Glacial acetic acid test
DIN 53109 - Abrasion by the abrasion wheel method Testing of paper and board, Determination of abrasion by the abrasion wheel method
DIN 53119-2 - Determination of friction Testing of paper - Determination of friction - Part 2: Inclined plane method
DIN 53121 - Bending stiffness by the beam method Testing of paper and board - Determination of the bending stiffness by the beam method
DIN 53122-1 - Determination of water vapour transmission Testing of plastic and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method
DIN 53142-1 - Puncture test Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53230 - Scheme for the evaluation of tests Testing of paints, varnishes and similar coating materials - Scheme for the evaluation of tests
DIN 53236 Procedure B - Colour measurement Colouring materials - Conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
DIN 53292 - Tension test in flatwise plane Testing of sandwiches; tension test in flatwise plane
DIN 53293 - Four-point bending test Testing of core composites - bending test
DIN 53295 - Drum peeling test Testing of core composites - Drum peeling test
DIN 53323 - Vaulting and bursting test Testing of leather - determination of the stress-strain behaviour during vaulting and bursting test
DIN 53331 - Stitch tear resistance Testing of leather: Determination of the stitch tear resistance
DIN 53333 - Determination of the water vapour permeability Testing of leather, artificial leather and textiles; determination of the water vapour permeability
DIN 53350 - Stiffness in bending (method according to Ohlsen) Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending; method according to Ohlsen
DIN 53351 - Permanent folding (Flexometer-method) Testing of artificial leather and similar shut materials - Behaviour at permanent folding (Fexometer-method)
DIN 53354 - Tensile test Testing of artificial leather - Tensile test
DIN 53356 - Tear growth test Testing of artificial leather and similar sheet materials - Tear growth test
DIN 53357-A - Adhesion test (method A) Testing of plastic sheets - Adhesion test (method A)
DIN 53359 - Flex cracking test Testing of artificial leather and similar sheet materials - Flex cracking test
DIN 53360 - Determination of the static and permanent elongation Testing of artificial leather and similar sheet materials - Determination of the total elongation (statical elongation) and irreversible elongation
DIN 53362 - Stiffness in bending (Method according to Cantilever) Testing of plastic films and textile fabrics (excluding nonwovens), coated or not coated with plastics - Determination of stiffness in bending - Method according to Cantilever
DIN 53363 - Tear test using trapezoidal test specimen with incision Testing of plastics films - Tear test using trapezoidal test specimen with incision
DIN 53370 - Method F - Thickness Testing of plastic films - Determination of thickness by mechanical scanning
DIN 53370 - Procedure P - Thickness Testing of plastic films - Determination of thickness by mechanical scanning
DIN 53373 - Impact penetration Testing of plastics - impact penetration test combined with data recording by means of electronic devices
DIN 53377 - Determination of dimensional stability Testing of plastic films - Determination of dimensional stability
DIN 53377 - Determination of Dimensional stability Testing of plastic films - Determination of dimensional stability
DIN 53423 - Three-point bending test Test of rigid cellular plastics; bending test
DIN 53424 - Determination of dimensional stability under heat Testing of rigid cellular plastics - determination of dimensional stability under heat in the case of flexural load and compression load
DIN 53428 - Behaviour when exposed to fluids, vapours and solids Testing of cellular materials - Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
DIN 53430 - Tensile test Testing of rigid cellular plastics - tensile test
DIN 53435 (Dynstat bending test) - Dynstat bending test, DB Testing of plastics - Bending test and impact test on dynstat test specimens § 5.2 Dynstat bending test, DB
DIN 53435-DB-G (Dynstat flexural test) - Determination of flexural properties with dynstat test specimens Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Flexural properties with dynstat test specimens
DIN 53435-DS notched (Dynstat impact flex. test) - Determination of impact resistance at dynstat test specimens, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength
DIN 53435-DS unnotched (Dynstat impact flexural test) - Determination of impact resistance at dynstat test specimens, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched
DIN 53435-DS-G (Dynstat impact flex. test, unnotched, -25°C) - Determination of impact resistance at dynstat test specimens at -25 °C, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (-25°C)
DIN 53435-DS-G (Dynstat impact flex. test, unnotched, -30°C) - Determination of impact resistance at dynstat test specimens at -30 °C, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (-30°C)
DIN 53435-DS-G (Dynstat impact flexural test, unnotched) - Determination of impact resistance at dynstat test specimens, unnotched Testing of plastics - determination of flexural properties and impact resistance with dynstat test specimens; Impact strength, unnotched (RT)
DIN 53435-DS-K (Dynstat impact flex. test, notched, -25°C) - Determination of impact resistance at dynstat test specimens at -25 °C, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (-25°C)
DIN 53435-DS-K (Dynstat impact flex. test, notched, -30°C) - Determination of impact resistance at dynstat test specimens at -30 °C, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (-30°C)
DIN 53435-DS-K (Dynstat impact flexural test, notched) - Determination of impact resistance at dynstat test specimens, notched Testing of plastics - Determination of flexural properties and impact resistance with dynstat test specimens; Notched impact strength, notched (RT)
DIN 53438-2 - Edge ignition Testing of combustible materials - reaction against a flame of a burner - Edgeing flame action
DIN 53438-3 - Surface ignition Testing of combustible materials - reaction against a flame of a burner - Surface flame action
DIN 53453 (impact resistance) - Impact resistance Testing of plastics - Determination of impact resistance
DIN 53453 (notched impact resistance) - Impact resistance Testing of plastics - Determination of impact resistance
DIN 53482 / DIN VDE 0303-3 / VDE 0303-3 - Surface resistance Methods of test for materials for electrical purposes; measuring of the electrical resistance of non-metallic materials
DIN 53497-A - Heat storage test with constant storage period Testing of plastics - Heat storage test of moulded articles made of thermoplastic moulding materials without outside mechanical stress; Method A: constant storage period
DIN 53497-B - Heat storage test at constant temperature Testing of plastics - Heat storage test of moulded articles made of thermoplastic moulding materials without outside mechanical stress; Method B: constant temperature
DIN 53504 (Temperature chamber - in heat) - tensile properties Testing of rubber - Determination of tear strength, tensile strength, elongation at break and stress values in a tensile test
DIN 53504 - Tensile properties Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN 53505-A - Determination of Shore A hardness Testing of rubber, elastomers and plastics - Shore hardness testing A and D; Shore A
DIN 53505-D - Determination of Shore D hardness Testing of rubber - Shore A and Shore D hardness test; Shore D
DIN 53506 - Needle tear resistance Testing of rubber, Determination of needle tear resistance
DIN 53508 - Accelerated ageing Testing of rubber - Accelerated ageing
DIN 53509-1-A - Resistance to ozone cracking Testing of rubber - Determination of resistance to ozone cracking - Part 1: static conditions; Method A (Assessment of cracking after exposure for a specified period at a given strain)
DIN 53509-1-B - Resistance to ozone cracking Testing of rubber - Determination of resistance to ozone cracking - Part 1: Static conditions; Method B (Determination of the length of time required for the first cracks to develop at a fiven strain)
DIN 53512 - Determination of rebound resilience Testing of Rubber - Determination of rebound resilience (Schob pendulum)
DIN 53516 - Abrasion Testing of rubber and elastomers - determination of abrasion
DIN 53528 - Abrasion test with the Frank Hauser apparatus Testing of rubber-coated textiles - abrasion test - determination of loss in mass by the Frank Hauser apparatus
DIN 53530 - Separation test Testing of organic materials - Test for separating layers of laminated woven fabrics; JUST sheets
DIN 53572 - Compression set Testing of soft-elastic foams - Determination of compression set after constant deformation
DIN 53577 - Stress-strain characteristics Determination of compression stress value and compression stress-strain characteristic for flexible cellular materials
DIN 53579 (indentation distance) - Hardness (Indentation distance at defined indentation force) Testing of flexible cellular material - Indentation test on finished parts (Indentation distance at defined indentation force)
DIN 53579 (indentation force) - Hardness test (indentation force at defined indentation distance) Testing of flexible cellular material - Indentation test on finished parts (indentation force at defined indentation distance)
DIN 53579-1 (at default indentation distance) - Hardness (at default indentation distance) Testing of flexible cellular material - hardness test on finished parts - indentation test on shaped parts (Indentation force at default indentation distance)
DIN 53579-1 (at default indentation force) - Hardness (at default indentation force) Testing of flexible cellular material - hardness test on finished parts - indentation test on shaped parts (Indentation distancee at default indentation force)
DIN 53715 - Water content by titration according to Karl Fischer Testing of plastics - determination of water content by titration according to Karl Fischer
DIN 53728-3 - Determination of viscosity number Testing of plastics - determination of viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution
DIN 53752/ ISO 11359-2 - Determination of the coefficient of linear thermal expansion Testing of plastics - Determination of the coefficient of linear thermal expansion
DIN 53754 - Abrasion with the abrasion disk method Testing of Plastics - Determination of abrasion - abrasive disk method
DIN 53765 (DSC) - Determination of melting behaviour Testing of plastics and elastomeres - Thermal analysis - DSC-method; Method B: determination of the melting behavior
DIN 53800-1 - Determination of dry mass by desiccation in hot air Textiles - Determination of commercial mass - Part 1: Determination of dry mass by desiccation in hot air
DIN 53800-2 - Determination of commercial mass and commercial linear density Textiles - Determination of commercial mass - Part 2: Determination of commercial mass and commercial linear density
DIN 53808-1 - Determination of length of fibres Testing of textiles - Determination of length of fibres by measuring of individual fibres
DIN 53811 - Determination of the diameter of fibres Testing of textiles - determination of the diameter of fibres from longitudinal view by microscope projection
DIN 53814 - Determination of water retention power Testing of textiles - determination of water retention power of fibres and yarn cuttings
DIN 53817-2 - Capacitive test (Uster) Testing of textiles - determination of the unevenness of slivers and yarns; capacitive test
DIN 53830-3 - Short length method Testing of textiles - determination of linear density of single and plied yarns; simple yarns and plied yarns, textured yarns; short length method
DIN 53830-4 - Short length method Testing of textiles - determination of linear density of single and plied yarns - elasto-yarns including core spun yarns from elastofibres; short length method
DIN 53835-13 - Testing of the elastic behaviour (between constant elongation limits) Testing of textiles - testing of the elastic behaviour - textile fabrics, single tensile strain between constant elongation limits
DIN 53835-14 - Testing the elastic behaviour (between two force limits) Testing of textiles - tensile test for testing the elastic behaviour - knitted fabrics, single strain between two force limits
DIN 53835-2 - Tensile test for testing the elastic behaviour (repeated tension stresses between constant elongation limits) Testing of textiles - tensile test for testing the elastic behaviour - single and plied yarns from elastofibres, repeated tension stresses between constant elongation limits
DIN 53840-1 - Determination of curling, of characteristic curling and of mechanical curling resistance Testing of textiles - determination of curling, of characteristic curling and of mechanical curling resistance of textured filament yarns up to a linear density of 400dtex
DIN 53842-1 - Knot tensile test Testing of textiles - knot tensile test for single and plied yarns
DIN 53843-1 - Loop tensile test Testing of textiles - loop tensile test, yarns
DIN 53852 - lengthwise - Determination of yarn length ratios Testing of textiles - determination of yarn length ratios in woven and knitted fabrics (longitudinal direction)
DIN 53852- crosswise - Determination of yarn length ratios Testing of textiles - determination of yarn length ratios in woven and knitted fabrics (cross direction)
DIN 53855-1 - Determination of thickness Testing of textiles - determination of the thickness of the textile fabrics (exept floor coverings) - apparent density over 0,05g/cm³
DIN 53856 - Determination of the mass portion of warp and weft Testing of textiles - Determination of the mass portion of warp and weft
DIN 53859-5-A - Trapezoid test Testing of textiles - tear growth test on textile fabrics - trapezoid test
DIN 53860-1 - Elbow-test, static strain Testing of textiles - testing of the bulging tendency of textile fabrics - elbow-test, static strain
DIN 53863-2 - Rotary abrasion test Testing of textiles - abraision test methods for textile fabrics - rotary abraision test
DIN 53864 - bending stiffness Testing of textiles - Determination of bending stiffness - A method according to Schlenker
DIN 53866-2 - Shrinkage in water Testing of textiles - shrinkage of single and plied yarns - determination of shrinkage in water
DIN 53866-3 - Shrinkage in hot air Testing of textiles - shrinkage of single and plied yarns - determination of shrinkage in hot air
DIN 53867 - Determination of pilling (Random Tumble Pilling Tester) Testing of textile fabrics - determination of pilling with the Random-Tumble-Pilling-Tester
DIN 53890 - Determination of crease resistance (dry) Testing of textiles - determination of crease resistance of textile fabrics by measuring the angle of recovery, method of horizontal fold and erected free limb on the dry sample
DIN 53891-2 - Determination of crease resistance (wet) Testing of textiles - determination of crease resistance of textile fabrics by measuring the angle of recovery, method of vertical fold on the wet sample
DIN 53892-2 - Dimensional change Testing of textiles - determination of dimensional change of woven fabrics subjected to the repeated attack of moisture and dry air
DIN 53894-1 - Determination of dimensional change Testing of textiles - determination of dimensional change of textile fabrics obtained by ironing with a moist ironing cloth and a heated plate
DIN 53894-2 - Determination of dimensional change Testing of textiles - determination of dimensional change of textile fabrics, steaming on ironing machines
DIN 53923 - Determination of water absorption Testing of textiles - determination of water absorption of textil fabrics
DIN 53924 - Determination of the velocity of soaking water Testing of textiles - velocity of soaking water of textile fabrics (method by determining the rising height)
DIN 53931 - Resistance of textiles to mildew Testing of textiles - determination of the resistance of textiles to mildew; growth test
DIN 53934 - Determination of the sliding resistance Testing of textiles - determination of the sliding resistance of woven fabrics to displacement
DIN 54005 - Colour fastness of dyeings and prints to water (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to water (mild)
DIN 54015 - Colour fastness to washing in presence of peroxide Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in precense of peroxide
DIN 54016 - Colour fastness to washing in presence of hypochlorite Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to washing in precense of hypochlorite
DIN 54034 - Hypochlorite (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to bleaching; hypochlorite (mild)
DIN 54040 - Colour fastness of dyeings and prints to alkaline milling (mild) Testing of colour fastness of textiles - determination of colour fastness of dyeings and prints to alkaline milling (mild)
DIN 54056-A - Colour fastness of dyeings and prints to sublimation in storage Testing of colour fastness of textiles - Determination of colour fastness of dyeings and prints to sublimation in storage
DIN 54201 - Colour fastness to rubbing Testing the color fastness of textiles - Determining the rubbing fastness of dyeings and prints
DIN 54204 - Potassium hydroxide solution method Testing of textiles - quantitative analysis of binary mixtures - wool with other fibres - potassium hydroxide solution method
DIN 54205 - Sulphuric acid method Testing of textiles - quantitative analysis of binary mixtures; natural or regenerated cellulose fibres with polyester fibres - sulphuric acid method
DIN 54206 - Hypochlorite method Testing of textiles - quantitative analysis of binary mixtures - protein fibres with fibres - hypochlorite method
DIN 54208 - Formic acid/ zinc chloride method Testing of textiles - quantitative analysis of binary mixtures - Regenerated cellulose fibres with other fibres, especially cotton - formic acid/ zinc chloride method
DIN 54209 - Formic acid/ zinc chloride method Testing of textiles - quantitative analysis of binary mixtures - degummed mulberry silk with wool - formic acid/ zinc chloride method
DIN 54210 - Acetone method Testing of textiles - quantitative analysis of binary mixtures - acetate fibres with other fibres - acetone method
DIN 54211 - Dichlormethane (methylene chloride) method Testing of textiles - quantitative analysis of binary mixtures - triacetate fibres with other fibres - dichlormethane (methylene chloride) method
DIN 54215 - Xylol method Testing of textiles - quantitative analysis of binary mixtures - polypropylene fibres with other fibres; xylol method
DIN 54217 - Dimethyl formamide method Testing of textiles - quantitative analysis of binary mixtures - acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres; dimethyl formamide method
DIN 54220 - Formic acid method Testing of textiles - quantitative analysis of binary mixtures - polyamide 6 6 or polyamide 6 fibres with other fibres - formic acid method
DIN 54221 - Hydrochloric acid method Testing of textiles - quantitative analysis of binary mixtures - polyamide 6 6 or polyamide 6 fibres with other fibres - hydrochloric acid method
DIN 54231 - Detection of disperse dyestuffs Textiles - Detection of disperse dyestuffs (HPLC-DAD)
DIN 54278-1 - Determination of materials soluble in organic solvents Testing of textiles - Coatings and attendant materials - Part 1: Determination of materials soluble in organic solvents
DIN 54278-2 - Determination of condensation products splittable by means of hydrochloric acid Testing of textiles - coatings and attendant materials, determination of condensation products splittable by means of hydrochloric acid
DIN 54279 - Determination of the solubility of wool in urea/ bisulphite solution Testing of textiles - determination of the solubility of wool in urea/ bisulphite solution
DIN 54280 - Determination of acidity of wool Testing of textiles - determination of acidity of wool
DIN 54281 - Determination alkali solubility of wool Testing of textiles - determination alkali solubility of wool
DIN 54285 - Determination of sizing content Testing of textiles - determination of sizing content
DIN 54287 - Determination of alkali content of wool Testing of textiles - determination of alkali content of wool
DIN 54288 - Quantitative determination of sulfur in viscose fibres Testing of textiles - quantitative determination of sulfur in viscose fibres
DIN 54301 - Determination of stitch point tearing out resistance Testing of textiles - determination of stitch point tearing out resistance of bonded-fibre fabrics, felts, and similar fabrics
DIN 54310 - Mechanical delamination test Testing of textiles - delamination of fusible interlinings from upper fabrics; mechanical delamination test
DIN 54316 - Determination of thickness loss of textile floor coverings at static load Testing of textiles - determination of thickness loss of textile floor coverings at static load
DIN 54345-1 - Electrostatic behaviour Testing of textiles - electrostatic behaviour - determination of electrical resistance
DIN 54457 - Bead peel test Structural adhesives - Testing of adhesively bonded joints - Bead peel test
DIN 54836 - Determination of ignition temperature Testing of combustible materials - determination of ignition temperaure
DIN 55543-5 § 6.1 - Adhesion strength (peeling test) Packaging Test - Test methods for packaging films - Part 5: Determination of adhesion strength, § 6.1 Strip test (peeling angle 90 ° or 180 °)
DIN 55543-5 § 6.2 - Adhesion strength - Strip test with roll (peeling angle 90 °) Packaging Test - Test methods for packaging films - Part 5: Determination of Adhesion strength, § 6.2: Strip test with roll (peeling angle 90 °)
DIN 55543-5 § 6.3 - Adhesion strength - carrier based test (peel test 180 °) Packaging Test - Test methods for packaging films - Part 5: Determination of adhesion strength, § 6.3 carrier based test (peeling angle 180 °)
DIN 55660-2 - Determination of the free surface energy of solid surfaces Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
DIN 55662 - Testing of resistance to pressure-water jetting Paints and varnishes - Coatings for automotive industry - Testing of resistance to pressure-water jetting
DIN 55913-2 § 2.9 - Determination of loss on ignition Pigments - Iron oxide pigments - methods for analysis; § 2.9: Determination of loss on ignition
DIN 55996-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes Stone chip resistance test for coatings Part 1: Multi impact test
DIN 6167 - Yellowness Description of yellowness of near-white or near-colourness materials
DIN 6174 - Colour measurement (CIELAB) Colorimetric evaluation of colour coordinates and colour differences to the approximated uniform CIELAB colour space
DIN 62050 - Presentation and pattern design Knitted fabrics - Presentation and pattern design
DIN 67530 - Gloss measurement Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
DIN 75200 - Burning behaviour Determination of burning behaviour of interior materials in motor vehicles
DIN 75201-A - Fogging (reflectometric) Determination of the fogging characteristics of trim materials in the interior of automobiles; Method A (reflectometric)
DIN 75201-B - Fogging (gravimetric) Determination of the fogging characteristics of trim materials in the interior of automobiles; Method B (gravimetric)
DIN 75220-D - Sun simulation (long term testing) Ageing Automobile Components in Solar Simulation Units (Long term Testing)
DIN 75220-Z - Sun simulation (cycle test) ageing of Automobile Components in Solar Simulation Units (cycle Test)
DIN CEN/TS 15370-1 - Ash melting behaviour Solid biofuels - Method for the determination of ash melting behaviour - Characteristic temperatures method
DIN EN 1021-1 - Cigarette test Furniture - Assessment of the ignitiabiliy of upholstered furniture - Part 1: Ignition source smouldering cigarette
DIN EN 1021-2 - Match flame test Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent
DIN EN 1049-2 - Number of threads Textiles - woven fabrics - Construction - Methods of analysis; Part 2: Determination of number of threads per unit length
DIN EN 1149-1 - Specific surface resistivity Protective clothing - Electrostatic properties - Part 1: Surface resistivity (Test methods and requirements)
DIN EN 12087, Procedure 2 - Determination of water absorbtion Thermal insulating products for building applications - Determination of long term water absorption by immersion; Method 2: Total immersion
DIN EN 12127 - Determination of mass per unit area Textiles - Fabrics - Determination of mass per unit area using small samples
DIN EN 12311-1 - Tensile properties Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof watterpoofing, determination of tensile properties
DIN EN 12373-4 - Dye spot test with prior acid treatment Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
DIN EN 12393 / BVL L 00.00-48 - Gas chromatographic determination of pesticide residues DIN EN 12393: Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues / BVL L 00.00-48: Examination of foods - fatty foods - Multiresidue methods for the gas chromatographic determination of pesticide residues
DIN EN 12540 (Appendix E) - Disruptions in chrome coatings Corrosion protection of metals- Electrodeposited coating of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; Appendix E: Disruptions in chrome coatings
DIN EN 12667 - Determination of thermal resistance Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
DIN EN 12720 - Surface resistance against cold liquids Furniture - Assessment of surface resistance to cold liquids
DIN EN 13130-4 - Determination of 1,3­butadiene Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics
DIN EN 13130-4, based on - Determination of 1,3­butadiene Materials and articles in contact with foodstuffs - Plastics substances subjects to limitation - Part 4: Determination of 1,3-butadiene in plastics
DIN EN 13274-4 (method 3) Respiratory protective devices - Part 4: Flame tests - Method 3: One burner testing with moving test sample
DIN EN 13392 - Determination of linear density
DIN EN 13512 - buckling strength Test methods for uppers and lining - buckling strength
DIN EN 13657-9.2 / DIN EN 13346-C (S7a) - Determination of acid-soluble elements Characterization of sludges - determination of trace elements and phosphorus - aqua regia extraction method; HC- pulping - closed microwave
DIN EN 13758-1 - Determination of the UV protection of clothes Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
DIN EN 13823 - Thermal attack by (SBI) DIN EN 13823 - Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
DIN EN 13844 - Thermal shrinkage Textiles - Monofilaments - Determination of thermal shrinkage
DIN EN 13895 - Tensile test
DIN EN 14107 Fat and oil derivatives - Fatty acid methyl esters ( FAME ) Determination of phosphours content by inductively coupled plasma ( ICP ) emission spectrometry
DIN EN 14111 Fat an oil derivatives - Fatty acid methyl esters ( FAME ) - Determination of iodine value
DIN EN 14112 Fat and oil derivatives - Fatty Acid Methyl Ester ( FAME ) Determination of oxidation stability ( accelerated oxidation test )
DIN EN 14288-A - Fogging characteristics (reflektometric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method A (reflektometric)
DIN EN 14288-B - Fogging characteristics (gravimetric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method B (gravimetric)
DIN EN 14621 - Methods of tests for textured or non-textured filament yarns Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DIN EN 1464 - Peel resistance Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method
DIN EN 1464 - Peel resistance Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
DIN EN 1465 - Tensile lap-shear strength Adhesives - Determination of tensile lap-shear strength of bonded assemblies
DIN EN 14704-1 - Determination of elasticity, strip test Determination of the elasticity of fabrics - Part 1: Strip tests
DIN EN 14971 - Determination of number of stitches Textiles - Knitted fabrics - Determination of number of stitches per unit lenght and unit area
DIN EN 15104-N Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
DIN EN 15336 - Determination of the time to rupture of bonded joints under static load Adhesive - Determination of the time to rupture of bonded joints under static load
DIN EN 15598 - Pile loop tear out resistance Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction
DIN EN 15977 - Determination of elongation and permanent deformation Rubber or plastic coated fabrics - Mechanical properties - Determination of elongation under load and residual deformation
DIN EN 1604 - Dimensional stability Thermal insulating products for building applications - Determination of dimensional stabiliy under specified temperature and humidity conditions
DIN EN 1773 - Determination of width and length Textiles - Fabrics - Determination of width and length
DIN EN 1811 - Release of nickel Reference test method for release of nickel from post assemblies which are inserted into pierced parts of the human body and products intended to come into direct and prolonged contact with the skin
DIN EN 1811 - Release of nickel Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
DIN EN 1811 - Release of nickel Reference test method for release of nickel from post assemblies which are inserted into pierced parts of the human body and products intended to come into direct and prolonged contact with the skin
DIN EN 1876-1 - Bending test at low temperature Rubber- or plastics-coated fabrics - Low temperature tests - Part 1: Bending test
DIN EN 1939 - Appendix A (adhesion at low temperature) - peel adhesion properties Self adhesive tapes - Determination of peel adhesion properties - Appendix A
DIN EN 1939 - peel adhesion properties Self adhesive tapes - Determination of peel adhesion properties
DIN EN 1963 - Determination of surface mass loss through Tretradgerät System Lisson Textile floor coverings - Tests using the Lisson Tretrad Machine
DIN EN 20105-A02 / ISO 105-A02 - Grey scale for assessing change in colour Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
DIN EN 20105-A03 / ISO 105-A03 - Grey scale for assessing staining Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining
DIN EN 20811 - Hydrostatic pressure test Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test
DIN EN 22313 / ISO 2313 - Determination of the recovery from creasing Textile fabrics - Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
DIN EN 24920 / ISO 4920 - Determination of resistance to surface wetting (Spray test) Textile fabrics - Determination of resistance to surface wetting (Spray test)
DIN EN 25077 - Determination of dimensional change in washing and drying Textiles - Determination of dimensional change in washing and drying
DIN EN 29073-1 (ISO 9073-1, 1989-07) - Determination of mass per unit area Textiles - test method for nonwovens - Part 1: determination of mass per unit area
DIN EN 29073-3 - Determination of tensile strength and elongation Textiles - Test method for nonwovens - Part 3: Determination of tensile strength and elongation
DIN EN 29865 / ISO 9865 - Bundesmann rain-shower test Textiles - Determination of water repellency of fabrics by the Bundesmann rain-shower test
DIN EN 310 - Flexural properties Wood-based panels - Determination of modulus of elasticity in bending and of bending strength,
DIN EN 31092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions
DIN EN 31092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
DIN EN 317 - Swelling in thickness after immersion in water Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
DIN EN 322 - Determination of moisture content Wood-based panels - Determination of moisture content
DIN EN 323 - Determination of density Wood-based panels - Determination of density
DIN EN 3665 - Filiform corrosion resistance test Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys
DIN EN 367 - Determining of the heat transmission on exposure to flame Protective clothing - Protection against heat and flames - Test method: determining of the heat transmission on exposure to flame
DIN EN 388 § 6.5 (Penetration force) - Puncture test with a steel pin Protective gloves against mechanical risks; Penetration force
DIN EN 420 § 6.5 - Water vapour absorption Absorption of vapour - Protective gloves - General requirements for gloves; § 6.5: Test method for determination of water vapour absorption
DIN EN 438-2 § 11 - Resistance to abrasion High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; § 11: Resistance to abrasion
DIN EN 513 - Method 1, Simulation temperate climate zone (M) - Artificial radiation exposure or weathering Unplasticized PVC profiles for the fabrication of windows and doors - Determination of the resisance to artificial weathering
DIN EN 60 (625°C) - Determination of loss on ignition Glass-reinforced plastics - Determination of loss on ignition (625°C)
DIN EN 60068-2-1 / VDE 0468-2-1 - Cold storage Environmental testing - Part 2-1: Tests - Test A: Cold
DIN EN 60068-2-11 - Salt mist test Environmental testing - Part 2: Tests - Test Ka: Salt mist
DIN EN 60068-2-14 § 7 (IEC 60068-2-14) - Test Na: Rapid change of temperature with prescribed time of transfer Enviromental testing - Part 2-14: Tests - Test N: Change of temperature; § 7: Test Na: Rapid change of temperature with prescribed time of transfer
DIN EN 60068-2-14 § 8 (IEC 60068-2-14) - Test Nb:Changes of temperature with specified rate of change Enviromental testing - Part 2-14: Tests - Test N: Change of temperature; § 8: Test Nb: Changes of temperature with specified rate of change
DIN EN 60068-2-2 / VDE 0468-2-2 - Heat storage Environmental testing - Part 2-2: Tests - Test B: Dry heat
DIN EN 60068-2-27 - Mechanical shock Environmental testing - part 2-27: Tests - Test Ea and guidance: shock
DIN EN 60068-2-30 - Climate cycle test Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DIN EN 60068-2-38 / VDE 0468-2-38 - Climate cycle test Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
DIN EN 60068-2-52 / IEC 68-2-52 - saltspray test Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
DIN EN 60068-2-60 - Method 4 - Corrosion test with flowing Gas Environmental testing - Part 2: Tests - Test Ke: flowing mixed gas corrosion test
DIN EN 60068-2-60 / VDE 0468-2-60, Method 4 - Corrosion test with flowing Gas Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test (IEC 60068-2-60:2015)
DIN EN 60068-2-70 / IEC 68-2-70 - Resistance to abrasion (Abrex) Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (Abrex)
DIN EN 60068-2-78 / IEC 60068-2-78 - Damp heat, steady state Environmental testing Part 2-78: Tests - test Cab: Damp heat, steady state
DIN EN 60112 / VDE 0303-11 (IEC 60112) - CTI - Determation of the comparative tracking indices Method for the determination of the proof and the comparative tracking indices of solid insulating materials
DIN EN 60156; VDE 0370-5 - Determination of the breakdown voltage (insulatingoil) Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156: 1995);
DIN EN 60247; VDE 0380 - Measurement of relative permittivity Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
DIN EN 60695-2-11; VDE 0471-2-11 (IEC 60695-2-11) - Glow Wire Test Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability test method for end-products
DIN EN 60695-2-12; VDE 0471-2-12 (IEC 60695-2-12) - GWFI (Glow Wire Flammability Index) Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods; Glow-wire flammability test method for materials
DIN EN 60695-2-13; VDE 0471-2-13 (IEC 60695-2-13) - GWIT (Glow Wire Ignition Temperature) Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
DIN EN 61439-1 (VDE 0660-600-1) § 10.2.2.3/4 - Cyclic corrosion test with salt spray test Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2011) § 10.2.2.3/4 Testing for sharpness B with evaluation
DIN EN 62321/VDE 0042-1 (closed vessel/microwave) - Determination of the total content of selected elements with atomic emission spectrometry (ICP-OES) Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr-VI, polybrominated biphenyls, polybrominated diphenyl ethers)
DIN EN 62321/VDE 0042-1 Annex A - Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers with GC-MS Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); Appendix A: Determination of polybrominated biphenyls/polybrominated diphenyl ethers in polymers with GC-MS
DIN EN 62321/VDE 0042-1 Annex C - Determination of chrome(VI) Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); Appendix C: Determination of chromium VI in polymers and electronics using a colorimetric method
DIN EN 62321/VDE 0042-1 chapter 7 (closed vessel/microwave) - Determination of mercury in polymers, metals and electronics Electrotechnical products - Determination of levels of six regulated substances (Pb, Hg, Cd, Cr VI, polybrominated biphenyls, polybrominated diphenyl ethers); § 7: Determination of mercury in polymers, metals and electronics with CV-AAS, CV-AFS, ICP-OES and ICP-MS
DIN EN 62631-3-1 / VDE 0307-3-1 - Volume resistance and volume resistivity Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method (IEC 62631-3-1:2016)
DIN EN 62631-3-2 / VDE 0307-3-2 - Surface resistance and surface resistivity Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity (IEC 62631-3-2:2015)
DIN EN 62631-3-3 - Insulation resistance Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC Methods) - Insulation resistance
DIN EN 62631-3-3 / VDE 0307-3-3 - Insulation resistance Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance (IEC 62631-3-3:2015)
DIN EN 71-11 § 5.8 - Determination of phosphates Safety of toys - Part 11: Organic chemical compounds - methods of analysis; § 5.8: Plasticiser
DIN EN 71-2 - Flammability Safety of toys - Part 2: Flammability
DIN EN 71-3 - Migration of certain elements Safety of toys - Part 3: Migration of certain elements
DIN EN 717-1 - Formaldehyde emission by the chamber method Wood-based panels - Determination of formaldyhyde release - Part 1: Formaldehyde emission by the chamber method
DIN EN 717-2 - Formaldehyde release by the gas analysis method Wood-based panels - Determination of formaldehyde release - Part 2 : Formaldehyde release by the gas analysis method
DIN EN 827 - Determination of conventional solids content and constant mass solids content Adhesives - Determination of conventional solids content and constant mass solids content
DIN EN 863 - Puncture resistance Protective clothing - Mechanical properties - Test method: Puncture resistance
DIN EN 986 - Dimensional change Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
DIN EN ISO / CIE 11664-4 - Colour measurement (CIELAB) Colorimetry - Part 4: CIE 1976 L*a*b* Colour space
DIN EN ISO 105-A04 - Instrumental assessment of the degree of staining of adjacent fabrics Textiles - Tests for colour fastness - Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
DIN EN ISO 105-A05 - Instrumental assessment of change in colour Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
DIN EN ISO 105-A06 - Instrumental determination of 1/1 standard depth of colour Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
DIN EN ISO 105-B02 (procedure 1) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B02 (procedure 1) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B02 (procedure 2) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B02 (procedure 2) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B02 (procedure 3) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B02 (procedure 3) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B02 (procedure 4) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 4)
DIN EN ISO 105-B02 (procedure 4) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 4)
DIN EN ISO 105-B02 (procedure 5) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 5)
DIN EN ISO 105-B02 (procedure 5) - Colour fastness to artificial light Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (procedure 5)
DIN EN ISO 105-B04 (procedure 1) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 1)
DIN EN ISO 105-B04 (procedure 2) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 2)
DIN EN ISO 105-B04 (procedure 3) - Colour fastness to artificial weathering Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (procedure 3)
DIN EN ISO 105-B06 (Exp. no. 3) according to, BST 90°C - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exp. Nr. 3), HLA acc. to BST 90°C - Aging test (Multiple Exposure) Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exposure condition no. 1) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 1)
DIN EN ISO 105-B06 (Exposure condition no. 2) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 2)
DIN EN ISO 105-B06 (Exposure condition no. 3) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 3)
DIN EN ISO 105-B06 (Exposure condition no. 3), HLA - Aging test (Multiple Exposure) Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-B06 (Exposure condition no. 5) - Light fastness Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Exposure condition no. 5)
DIN EN ISO 105-C01 - Colour fastness to washing: Test 1 (at 40°C) Textiles - Tests for colour fastness - Part C01: Colour fastness to washing: Test 1 (at 40°C)
DIN EN ISO 105-C02 - Colour fastness to washing: Test 2 (at 50°C) Textiles - Tests for colour fastness - Part C02: Colour fastness to washing: Test 2 (at 50°C)
DIN EN ISO 105-C03 - Colour fastness to washing: Test 3 (at 60°C) Textiles - Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 (at 60°C)
DIN EN ISO 105-C04 - Colour fastness to washing: Test 4 (at 95°C) Textiles - Tests for colour fastness - Part C04: Colour fastness to washing: Test 4 (at 95°C)
DIN EN ISO 105-C05 - Colour fastness to washing: Test 1 (at 95°C) Textiles - Tests for colour fastness - Part C05: Colour fastness to washing: Test 5 (at 95°C)
DIN EN ISO 105-C06 - Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering
DIN EN ISO 105-C08 - Colour fastness to domestic and commercial laundering Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
DIN EN ISO 105-C10 - Colour fastness to washing with soap or soap and soda Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda
DIN EN ISO 105-C12 - Colour fastness to industrial laundering Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering
DIN EN ISO 105-D01 - Colour fastness to dry cleaning Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning
DIN EN ISO 105-D01 - Colour fastness to dry cleaning Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchlorethylene solvent
DIN EN ISO 105-D02 - Colour fastness to rubbing: Organic solvents Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents
DIN EN ISO 105-E01 - Colour fastness to water Textiles - Tests for colour fastness - Part E01: Colour fastness to water
DIN EN ISO 105-E02 - Colour fastness to sea water Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
DIN EN ISO 105-E02 - Colour fastness to sea water Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
DIN EN ISO 105-E03 - Colour fastness to chlorinated water Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water)
DIN EN ISO 105-E04 (acid) - Colour fastness to perspiration (acid) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (acidic)
DIN EN ISO 105-E04 (acid) - Colour fastness to perspiration (acid) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (acidic)
DIN EN ISO 105-E04 (alkaline) - Colour fastness to perspiration (alkaline) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (alkaline)
DIN EN ISO 105-E04 (alkaline) - Colour fastness to perspiration (alkaline) Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (alkaline)
DIN EN ISO 105-E05 - Colour fastness to spotting - Acid Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting - Acid
DIN EN ISO 105-E06 - Colour fastness to spotting - alkali Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: alkali
DIN EN ISO 105-E07 - Colour fastness to spotting - Water Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water
DIN EN ISO 105-E08 - Colour fastness to hot water (70°C) Textiles - Tests for colour fastness - Part E08: Colour fastness to hot water
DIN EN ISO 105-E09 - Colour fastness to potting Textiles - Tests for colour fastness - Part E09: Colour fastness to potting
DIN EN ISO 105-E10 - Colour fastness to decatizing Textiles - Tests for colour fastness - Part E10: Colour fastness to decatizing
DIN EN ISO 105-E12 - Colour fastness to alkaline milling Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling
DIN EN ISO 105-E13 - Colour fastness to acid-felting (Severe) Textiles - Tests for colour fastness - Part E13: Colour fastness to acid-felting (Severe)
DIN EN ISO 105-E14 - Colour fastness to acid-felting (Mild) Textiles - Tests for colour fastness - Part E14 : Colour fastness to acid-felting (Mild)
DIN EN ISO 105-N01 - Colour fastness to bleaching: Hypochlorite Textiles - Tests for colour fastness - Part N01: Colour fastness to bleaching: Hypochlorite
DIN EN ISO 105-N02 - Colour fastness to bleaching: Peroxide Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching: Peroxide
DIN EN ISO 105-N03 - Colour fastness to bleaching: Sodium chlorite (mild) Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
DIN EN ISO 105-N04 - Colour fastness to bleaching: Sodium chlorite (severe) Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
DIN EN ISO 105-P01 - Colour fastness to dry heat (excluding pressing) Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat (excluding pressing)
DIN EN ISO 105-X01 - Colour fastness to carbonizing: Aluminium chloride Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride
DIN EN ISO 105-X02 - Colour fastness to carbonizing: Sulphuric acid Textiles - Tests for colour fastness - Part X02: Colour fastness to carbonizing: Sulphuric acid
DIN EN ISO 105-X04 - Colour fastness to mercerizing Textiles - Tests for colour fastness - Part X04: Colour fastness to mercerizing
DIN EN ISO 105-X05 - Colour fastness to organic solvents Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents
DIN EN ISO 105-X11 - Colour fastness to hot pressing Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing
DIN EN ISO 105-X12 - Colour fastness to rubbing Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
DIN EN ISO 105-X18 - Yellowing by phenols Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials
DIN EN ISO 11092 - Determination of thermal and water-vapour resistance Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions
DIN EN ISO 1110 - Accelerated conditioning of test specimens Kunststoffe - Polyamide; Beschleunigte Konditionierung von Probekörpern
DIN EN ISO 1133-1 - Determination of the melt flow behavior Plastics- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
DIN EN ISO 1133-2-B - Procedure B: Distance length measuring procedure (method for materials sensitive to time-temperature history and/or moisture) Plastics- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics- Part 2: Method for materials sensitive to time-temperature history and/or moisture
DIN EN ISO 1133-A - Determination of Melt mass-flow rate by mass determination (Method A) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method A: Mass determination procedure)
DIN EN ISO 1133-B - Determination of melt mass-flow rate by length of run measurement (Method B) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method B: length of run measurement)
DIN EN ISO 1133-B - Determination of melt mass-flow rate by length of run measurement (Method B) Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (Method B: length of run measurement)
DIN EN ISO 11339 - separation test (T-peel test) Adhesives - T-peel test for flexible-to-flexible bonded assemblies
DIN EN ISO 11341 (procedure 1) - Artifical weathering Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (Procedure 1)
DIN EN ISO 11357-1/ -2 (DSC) - Determination of the glass transition temperature Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles, Part 2: Determination of glass transition temperature and glass transition step height
DIN EN ISO 11357-1/ -3 (DSC) - Determination of the melting behavior Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles, Part 3: Determination of temperature and enthalpy of melting and crystallization
DIN EN ISO 11357-6 - Determinaton of OIT (DSC) Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DIN EN ISO 11403-1 § 6.3 (DIN EN ISO 527-1/-2) - Tensile properties at constant test speed (comparative test at different temperatures) Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties; § 6.3
DIN EN ISO 11501 - Measurement of dimensional change Plastics - film and sheeting - Determination of dimensional change on heating
DIN EN ISO 11640 - Colour fastness (Veslic abrasion) Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbung (Veslic abrasion)
DIN EN ISO 11641 - Colour fastness to perspiration Leather - Tests for colour fastness - Colour fastness to perspiration
DIN EN ISO 11642 - Colour fastness to water Leather - Tests for colour fastness- Colour fastness to water
DIN EN ISO 11643 - Colour fastness to dry-cleaning solutions Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions
DIN EN ISO 11644 - Test for adhesion of finish Leather - Test for adhesion of finish
DIN EN ISO 11644 - Test for adhesion of finish Leather - Test for adhesion of finish
DIN EN ISO 11664-4 - Colour measurement (CIELAB) Colorimetry - Part 4: CIE 1976 L*a*b* Color space
DIN EN ISO 1172-A - Residue on ignition Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of textile-glass and mineral-filler content - Calcination methods; Method A: without mineral filling material
DIN EN ISO 1172-B/HCl - Residue on ignition Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of textile-glass and mineral-filler content - Calcination methods; Method A: with mineral filling material
DIN EN ISO 1183-1 (Method A: immersion method) - Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (here: immersion method)
DIN EN ISO 1183-1 (Method B: liquid pyknometer) - Determination of density Plastics - Methods for determining the density of non-cellular plastics - Part1: Immersion method, liquid pyknometer method and titration method (here: liquid pyknometer)
DIN EN ISO 1183-3 (Gas-Pyknometer-Verfahren) - Determination of density Plastics - Methods for determinig the density of non-cellular plastics - Part 3: Gas pyknometer method
DIN EN ISO 11885 (E22) - Determination of selected elements by ICP-OES Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
DIN EN ISO 11909 - Determination of polyisocyanate Binders for paints and varnishes - Polyisocyanate resins - General methods of test
DIN EN ISO 11925-2 - ignition behaviour Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
DIN EN ISO 11997-1, cycle B - Corrosion test Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog) / dry / humidity (here: cycle B)
DIN EN ISO 11997-1, cycle B - Corrosion test Paints and varnishes- Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog) / dry / humid (here: cycle B)
DIN EN ISO 12185 - Determination of density Crude petroleum and petroleum products - Determination of density - Oscillation U-tube method
DIN EN ISO 12402-7 § 4.1.6.4 - Accelerated weathering Personal flotation devices - Part 7: Materials and components - safety requirements and test methods § accelerated weathering
DIN EN ISO 12570 - Determination of moisture content Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature
DIN EN ISO 12570 - Determination of moisture content Hygrothermal performance of building maerials and products- Determination of moisture content by drying at elevated temperature
DIN EN ISO 12625-8 - Water-absorption and water-absorption capacity Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
DIN EN ISO 12945-1 - Pilling box method Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method
DIN EN ISO 12945-2 - Modified Martindale method Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method
DIN EN ISO 12947-2 - Determination of specimen breakdown Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
DIN EN ISO 12947-2 - Determination of specimen breakdown Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
DIN EN ISO 12947-3 - Determination of mass loss Textiles - Detemination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss
DIN EN ISO 12947-4 - Assessment of appearance change Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change
DIN EN ISO 13934-1 - Tensile properties (strip method) Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 13934-1 in Heat - Tensile properties (strip method) Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 13934-2 - Tensile properties (grab method) Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method
DIN EN ISO 13935-1 - Seam tensile properties (strip method) Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method
DIN EN ISO 13935-2 - Seam tensile properties (grab method) Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
DIN EN ISO 13936-1 - Slippage resistance (Fixed seam opening method) Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method
DIN EN ISO 13936-2 - Slippage resistance (Fixed load method) Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
DIN EN ISO 13937-1 - Determination of tear force using ballistic pendulum method (Elmendorf) Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
DIN EN ISO 13937-2 - Determination of tear force of trouser-shaped test specimens Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
DIN EN ISO 13937-3 - Determination of tear force of wing-shaped test specimens Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
DIN EN ISO 13938-2 - Determination of bursting strength and bursting distension (Pneumatic method) Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension
DIN EN ISO 14125 (Method A) - Determination of flexural properties, three-point flexural test Fibre-reinforced plastic composites - Determination of flexural properties; Method A: Three-point bending test
DIN EN ISO 14125 (Method A) with temperature - Determination of flexural properties, three-point bending test Fibre reinforced plastics - Determination of flexural properties; Method A: three-point bending test - at temperature
DIN EN ISO 14125 (Method B) - Determination of flexural properties, four-point flexural test Fibre-reinforced plastic composites - Determination of flexural properties; Method B: Four-point bending test
DIN EN ISO 14130 - Determination of apparent interlaminar shear strength (short-beam method) Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method
DIN EN ISO 14184-1 - Concentration of formaldehyde (water extraction method) Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
DIN EN ISO 1421 - Tensile properties Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
DIN EN ISO 1421, Procedure 1 - Tensile test (strip method) Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break, method 1: strip method
DIN EN ISO 14268 - Water vapour permeability Leather - Physical and mechanical tests - Determination of water vapour permeability
DIN EN ISO 14268 - Water vapour permeability Leather - Physical and mechanical tests - Determination of water vapour permeability
DIN EN ISO 14389 - Determination of phthalates Textiles - Determination of the phthalates content - Tetrahydrofuran method
DIN EN ISO 14419 (based on; according to DBL 5463 4.12) - Hydrocarbon resistance test Textiles - Oil repellency - Hydrocarbon resistance test (according to DBL 5463 § 4.12)
DIN EN ISO 14419 - Hydrocarbon resistance test Textiles - Oil repellency - Hydrocarbon resistance test
DIN EN ISO 14419 - in accordance to - Oil repellency Textiles - Oil repellency - Examination of oil repellency under the help of hydrocarbons
DIN EN ISO 1456 (Appendix B, B.2.1) - Determination of film thickness (microscopic procedure) Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium, Appendix B: Test methods for coating thickness determination, B.2 Destructive procedures, B.2.1 Microscopic procedure
DIN EN ISO 1463 - Measurement of coating thickness (Microscopical method) Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
DIN EN ISO 1518-1 § 7.3 Test with a fixed test load - Determination of scratch resistance Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
DIN EN ISO 15487 - Self-flatness behaviour Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying
DIN EN ISO 15512-B1 - Determination of water content with Karl Fischer titration Plastics - Determination of water content - Method B1 water vaporization using a tube oven
DIN EN ISO 15700 - Colour fastness to water spotting Leather - Tests for colour fastness - Colour fastness to water spotting
DIN EN ISO 15701 - Colour fastness to migration Leather - Tests for colour fastness - Colour fastness to migration into polymeric material
DIN EN ISO 15702 - Colour fastness to machine washing Leather - Tests for colour fastness - Colour fastness to machine washing
DIN EN ISO 16000-5 / DIN ISO 16000-6 / VDI 4300-6 - Sampling of volatile organic compounds (VOCs) Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) and Part 6: Determination of volatile organic compounds (VOCs) in indoor and test chamber air by active sampling on TENAX TA® sorbent, thermal desorption and gas chromatography using MS/FID
DIN EN ISO 16000-9 - Emission test chamber method Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method
DIN EN ISO 16017-1 - Analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography (Pumped sampling) Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube / thermal desorption / capillary gas chromatography - Part 1: Pumped sampling
DIN EN ISO 16017-2 - Sampling and analysis of volatile organic compounds (Diffusive sampling) Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
DIN EN ISO 1628-1 - Determination of the viscosity number Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles
DIN EN ISO 1628-3 - Determination of viscosity number Plastics- Determination of the viscosity of polymers in dilute solution using capillary viscometers- Part3: Polyethylene and Polypropylene
DIN EN ISO 16925 - Resistance to pressure water-jetting Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
DIN EN ISO 17070 - Determination of pentachlorophenol content Leather - Chemical tests - Determination of pentachlorophenol content (PCP)
DIN EN ISO 17070 - Determination of pentachlorophenol content Leather - Chemical tests - Determination of pentachlorophenol content (PCP)
DIN EN ISO 17071-A - Fogging characteristics (reflektometric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method A (reflektometric)
DIN EN ISO 17071-B - Fogging characteristics (gravimetric) Leather - Physical and mechanical tests - Determination of fogging characteristics - method B (gravimetric)
DIN EN ISO 17075 - Determination of chromium(VI) content Leather - Chemical tests - Determination of chromium (VI) content
DIN EN ISO 17076-1 - Abrasion resistance (Taber method) Leather - Determination of abrasion resistance - Part 1: Taber method
DIN EN ISO 17076-2 - Abrasion resistance Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method
DIN EN ISO 17130 - Determination of dimensional change Leather – Physical and mechanical tests – Determination of dimensional change
DIN EN ISO 17186 - Surface coating thickness (Microscopical method) Leather - Physical and mechanical tests - Determination of surface coating thickness (Microscopical method)
DIN EN ISO 17186 - Surface coating thickness (Microscopical method) Leather - Physical and mechanical tests - Determination of surface coating thickness (Microscopical method)
DIN EN ISO 17226-1 - Determination of formaldehyde content (HPLC) Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography
DIN EN ISO 17226-2 - Determination of the formaldehyde content (colorimetric analysis) Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis
DIN EN ISO 17226-2 - Determination of the formaldehyde content (Method using colorimetric analysis) Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis
DIN EN ISO 17226-3 - Determination of formaldehyde content (HPLC) by the flask method Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather
DIN EN ISO 17235 - Determining of softness of leather Leather - Physical and mechanical tests - Determination of softness
DIN EN ISO 17294-2 (E29) - inductively coupled plasma mass spektrometry Water quality - Application of inductively coupled plasma mass spektrometry (ICP-MS) - Part 2: Determination of 62 elements
DIN EN ISO 176 - Plasticizer release Plastics - Determination of plasticiser release - Activated carbon method
DIN EN ISO 178 (Test in tempering chamber - in cold) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in cold)
DIN EN ISO 178 (Test in tempering chamber - in cold) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in cold)
DIN EN ISO 178 (Test in tempering chamber - in heat) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in heat)
DIN EN ISO 178 (Test in tempering chamber - in heat) - Flexural properties Plastics - Determination of flexural properties (Test in tempering chamber - in heat)
DIN EN ISO 178 - Flexural properties Plastics - Determination of flexural properties
DIN EN ISO 178 - Three-point bending test Plastics - Determination of flexural properties
DIN EN ISO 179-1 (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1 (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eA (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eB (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eC (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1eU (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 179-1/1fU (Charpy impact strength) - Determination of Charpy impact properties Plastics - Determination of Charpy impact properties - Part 1: non-instrumented impact test
DIN EN ISO 1798 - Tensile properties Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
DIN EN ISO 180/A (Izod impact strength, notched) - Determination of Izod impact properties, notched Plastics - Determination of Izod impact strength (notched, type A)
DIN EN ISO 180/B (Izod impact strength, notched) - Determination of Izod impact properties, notched Plastics - Determination of Izod impact strength (notched, type B)
DIN EN ISO 180/U (Izod impact strength) - Determination of Izod impact properties, unnotched Plastics - Determination of Izod impact strength (unnotched)
DIN EN ISO 1833-11 - Method using sulfuric acid Textiles - Quantitative chemical analysis - Part 11: Mixture of cellulose and polyester fibres (method using sulfuric acid)
DIN EN ISO 18412 (D40) / DIN EN ISO 11885 (E22) - Determination of chromium(VI) Water quality - Determination of Chromium (VI) - Photometric method for weakly contaminated water / Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
DIN EN ISO 1856-A / ISO 1856-A - Compression set at 70°C Flexible cellular polymeric materials - Determination of compression set; Method A: compression set at 70°C
DIN EN ISO 1856-B - Compression set at standard conditioning temperature Flexible cellular polymeric materials - Determination of compression set; method B: Compression set at standard conditioning temperature)
DIN EN ISO 1856-C - Compression set under specially defined conditions Flexible cellular polymeric materials - Determination of compression set; Method C: compression set under specially defined conditions
DIN EN ISO 1923 - Determination of linear dimensions Cellular plastics and rubbers - Determination of linear dimensions
DIN EN ISO 1924-2 - Determination of tensile properties Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min)
DIN EN ISO 1973 - Determination of linear density (gravimetric method) Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
DIN EN ISO 1973 - Determination of linear density (Vibroscope method) Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
DIN EN ISO 2039-1 - Determination of hardness, Ball indentation method Plastics - Determination of hardness - Part 1: Ball indentation method
DIN EN ISO 2039-2 - Determination of Rockwell hardness Plastics - Determination of hardness - Part 2: Rockwell hardness
DIN EN ISO 20566 - scratch resistance Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
DIN EN ISO 20567-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes - Determination of stone-chip resistance of coatins - Part 1: Multi-impact testing
DIN EN ISO 20567-1 - Stone chip resistance (Multi-impact testing) Paints and varnishes - Determination of stone-chip resistance of coatins - Part 1: Multi-impact testing
DIN EN ISO 2060 - Determination of linear density by the skein method Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
DIN EN ISO 2061 - Determination of twist in yarns - Direct counting method Textiles - Determination of twist in yarns - Direct counting method
DIN EN ISO 2062 - Tensile properties Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break
DIN EN ISO 2081 - Determination of layer weight Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
DIN EN ISO 2177 - Measurement of coating thickness - Coulometric method by anodic dissolution Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (also ASTM B 504)
DIN EN ISO 2178 - Coating Thicknesses by the Magnetic Method Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
DIN EN ISO 22088-3 - Stress cracking, bent strip method Plastics - Determination of resistance to environmental stress cracking ( ESC ) - Part 3: Bent strip method (replacement for DIN EN ISO 4599)
DIN EN ISO 2286-2 - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate Rubber- or plastics-coated fabric - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
DIN EN ISO 2286-3 - Determination of thickness Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
DIN EN ISO 2286-3 - Determination of thickness Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
DIN EN ISO 2360 - Measurement of coating thickness - Amplitude­sensitive eddy current method Non-conductive coatings on non-amgnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
DIN EN ISO 23910 - Stitch tear resistance Leather - Physical and mechanical tests - Measurement of stitch tear resistance
DIN EN ISO 23997 - Determination of mass per unit area Resilient floor coverings - Determination of mass per unit area
DIN EN ISO 2409 - Cross-cut test Paints and varnishes - Cross-cut test
DIN EN ISO 2409 - Cross-cut test Paints and varnishes - Cross-cut-test
DIN EN ISO 2411 - Determination of coating adhesion Rubber- or plastics-coated fabrics - Determination of coating adhesion
DIN EN ISO 2411 - Determination of coating adhesion Rubber- or plastics-coated fabrics - Determination of coating adhesion
DIN EN ISO 2420 - Apparent density and mass per unit area Leather - Physical and mechanical tests - Detrmination of apparent density and mass per unit area
DIN EN ISO 2420 - Determination of apparent density Leather - Physical and mechanical tests - Determination of apparent density
DIN EN ISO 2439 - Indentation hardness test Flexible cellular polymeric materials - Determination of hardness (indentation technique)
DIN EN ISO 2440 (Dry heat ageing) - Accelerated ageing test Flexible and rigid cellular polymeric materials - accelerated ageing tests (dry heat ageing)
DIN EN ISO 2440 (Dry heat ageing) - Accelerated ageing test Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DIN EN ISO 2440 (humidity ageing) - Accelerated ageing test Flexible and rigid cellular polymetric materials - Accelerated ageing tests (humidity ageing)
DIN EN ISO 2440 (humidity ageing) - Accelerated ageing test Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DIN EN ISO 2589 - Determination of thickness Leather - Physical and mechanical tests - Determination of thickness
DIN EN ISO 26082 - Soiling and cleanability with modified Martindale method Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather
DIN EN ISO 26082-1 - Soiling and cleanability with modified Martindale method Leather - Physical and mechanical test method for the determination of soiling - Part 1: Rubbing (Martindale) method
DIN EN ISO 2808-12A - Determination of film thickness - magnetic induction Paints and varnishes - Determination of film thickness - Method 12A: magnetic induction
DIN EN ISO 2808-13A - Determination of film thickness - magnetic induction Paints and varnishes - Determination of film thickness - Method 13A: magnetic induction
DIN EN ISO 2808-6A (ISO 2808-6A) - Determination of film thickness - Microscopic examination of cross-section Paints and varnishes - Determination of film thickness - Method 6A: cross microsection / cross-section
DIN EN ISO 2808-7B.2 (ISO 2808-7B.2) - Determination of film thickness - magnetic-induction principle Paints and varnishes - Determination of film thickness - Method 7C: magnetic-induction principle
DIN EN ISO 2808-7C (ISO 2808-7C) - Determination of film thickness - magnetic-induction principle Paints and varnishes - Determination of film thickness - Method 7C: magnetic-induction principle
DIN EN ISO 2808-7C - Determination of film thickness - Amplitude­sensitive eddy current method Paints and varnishes - Determination of film thickness - Method 7C: Amplitude­sensitive eddy current method
DIN EN ISO 2808-7D - Determination of film thickness - Amplitude­sensitive eddy current method Paints and varnishes - Determination of film thickness - Method 7D: Amplitude­sensitive eddy current method
DIN EN ISO 2811-1 - Determination of density (pycnometer) Paints and varnishes - Determination of density - Part 1: Pyknometer method
DIN EN ISO 2811-2 - Determination of density (Immersed body method) Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
DIN EN ISO 2812-1 - Resistance to liquids - immersion in liquids other than water Paints and varnishes - determination of resistance to liquids - Part 1: Method using immersion in liquids other than water
DIN EN ISO 2812-2 - Resistance to liquids - Water immersion method Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
DIN EN ISO 2812-3 - Resistance to liquids - Method using an absorbent medium Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
DIN EN ISO 2812-4 - Resistance to liquids - Spotting methods Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
DIN EN ISO 2813 - Gloss measurement Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
DIN EN ISO 2813 - gloss measurement Paints and varnishes - Determination of specular gloss of non-metallic coatings with 20 °, 60 ° and 85 ° (according to JIS K 5400 & MS & MS 652-14 600-60.)
DIN EN ISO 294-4 - Injection moulding of test specimens of thermoplastic materials (Determination of moulding shrinkage) Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shinkage
DIN EN ISO 3037 - Determination of edgewise crush resistance Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxes edge method)
DIN EN ISO 306 - Vicat softening temperature Plastics - Thermoplastics material - Determination of Vicat softening temperature (VST)
DIN EN ISO 307 - Determination of viscosity number Plastics - Polyamides - Determination of viscosity number
DIN EN ISO 3071 - Determination of pH value Textiles - Determination of pH of aqueous extract
DIN EN ISO 3104 Petroleum products -Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
DIN EN ISO 3146-C2 - Determination of melting behaviour (DSC) Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers (Part C2 = DSC, no longer in version 2002-06)
DIN EN ISO 3175-2 - Dry cleaning and finishing (Procedures for tetrachloroethene) Textiles - Dry cleaning and finishing - Part 2: Procedures for tetrachloroethene
DIN EN ISO 32100 - Flex resistance (flexometer method) Rubber- or plastic-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method
DIN EN ISO 32100 - Flex resistance (flexometer method) Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method
DIN EN ISO 3231 - Corrosion resistance (Kesternich test) Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
DIN EN ISO 3248 - Effect of heat Paints and varnishes - Determination of the effect of heat
DIN EN ISO 3251 - Determination of non-volatile-matter content Paints, varnishes and plastics - Determination of non-volatile-matter content
DIN EN ISO 3344 - Determination of moisture content Reinforcement products - Determination of moisture content
DIN EN ISO 3376 - Tensile properties Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DIN EN ISO 3376 - Tensile properties Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
DIN EN ISO 3377-1 - Tear load Leather - Physical and mechanical test - Determination of tear load - Part 1: Single edge tear
DIN EN ISO 3377-1 - Tear load (single edge tear) Leather - Physical and mechanical test - Determination of tear load - Part 1: Single edge tear
DIN EN ISO 3385 - Determination of fatigue by constant load pounding Flexible cellular polymeric materials - Determination of fatigue by constant load pounding
DIN EN ISO 3385 - Determination of fatigue by constant load pounding Flexible cellular polymeric materials - Determination of fatigue by constant load pounding
DIN EN ISO 3386-1 - Stress-strain characteristics in compression (low-density materials / <= 250 kg/m³) Polymeric materials, celular flexible - Determination of stress-strain characteristics in compression - Part 1: low-density materials
DIN EN ISO 3386-2 - Stress-strain characteristic in compression (High-density materials / > 250 kg/m³) Polymeric materials, cellular flixible - Determination of stress-strain characteristics in compression - Part 2: High-density materials
DIN EN ISO 3451-1 - Determination of ash Plastics - Determination of ash - Part 1 General methods
DIN EN ISO 3451-1-A - Determination of ash Plastics - Determination of ash - Part 1: General methods (here: procedure A: direct ash)
DIN EN ISO 3451-4-A (PA) - Ash content in Polyamides Plastics - Determination of ash - Part 4: Polyamides (here: method A: direct ash)
DIN EN ISO 3451-5-A (PVC) - Ash content in PVC Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (here: method A: direct ash)
DIN EN ISO 3497 - Determination of coating thickness and nickel content Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
DIN EN ISO 3613 - Determination of hexavalent chromium Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
DIN EN ISO 3668 - Visual comparison of colour of paints Paints and varnishes - Visual comparison of colour of paints
DIN EN ISO 3668 - Visual comparison of the colour of paints Paints and varnishes - Visual comparison of the colour of paints
DIN EN ISO 3675 - Determination of density (Hydrometer method) Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
DIN EN ISO 3679 - Determination of flash point Determination of flash point - Rapid equilibrium closed cup method
DIN EN ISO 3759 - Determination of dimensional change Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
DIN EN ISO 4045 - Determination of pH and difference figure Leather - Chemical tests - Determination of pH and difference figure
DIN EN ISO 4045 - Determination of pH value Leather - Chemical tests - Determination of pH
DIN EN ISO 4048 - Determination matter soluble in dichloromethane Leather - Determination matter soluble in dichloromethane
DIN EN ISO 4048 - Determination of matter soluble in dichlormethane and free fatty acid content Leather - Determination of matter soluble in dichlormethane and free fatty acid content
DIN EN ISO 4098 - Determination of water-soluble matter Leather - Chemical test s- Determination of water-soluble matter, water soluble inorganic matter and water-soluble organic matter
DIN EN ISO 4287 - Surface texture: Profile method Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
DIN EN ISO 4577 - Determination of thermal oxidative stability in air, Oven method Plastics - Polypropylene and propylene-copolymers: Determination of thermal oxidative stability in air, Oven method
DIN EN ISO 4590 - Determination of the volume percantage of open and of closed cells Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
DIN EN ISO 4628-1 - Evaluation of degradation of coatings Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - part 1 : General introduction and designation system
DIN EN ISO 4628-1 - Evaluation of degradation of coatings Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - part 1 : General introduction and designation system
DIN EN ISO 4628-2 - Assessment of degree of blistering Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
DIN EN ISO 4628-2 - Assessment of degree of blistering Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
DIN EN ISO 4628-3 - Assessment of degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
DIN EN ISO 4628-3 - Assessment of degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
DIN EN ISO 4628-4 - Assessment of degree of cracking Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
DIN EN ISO 4628-4 - Assessment of degree of cracking Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
DIN EN ISO 4628-5 - Assessment of degree of flaking Paints and varnishes - Evaluation of degredation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
DIN EN ISO 4628-8 - Assessment of degree of delamination and corrosion around a scribe Paints and varnishes - Evaluation of degradation of coatings - Designation of quantiy and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (Replaced for DIN 53167)
DIN EN ISO 4628-8 - Assessment of degree of delamination and corrosion around a scribe or other artificial defect Paints and varnishes - Evaluation of degradation of coatings - Designation of quantiy and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
DIN EN ISO 4674-1 Method B - Determination of tear resistance (Constant rate of tear methods) Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
DIN EN ISO 4674-2 - Determination of tear resistance (Ballistic pendulum method) Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method
DIN EN ISO 4684 - Determination of volatile matter Leather - Chemical tests - Determination of volatile matter
DIN EN ISO 4892-2 (Method A - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 100°C
DIN EN ISO 4892-2 (Method A - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C
DIN EN ISO 4892-2 (Method A - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps; Method A - BST 65°C
DIN EN ISO 4892-2 (method A) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
DIN EN ISO 4892-2 (Method B - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 100°C
DIN EN ISO 4892-2 (Method B - BST 100°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 100°C
DIN EN ISO 4892-2 (Method B - BST 65°C) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon arc lamps; Method B - BST 65°C
DIN EN ISO 4892-2 (method B) - Method of exposure to laboratory light sources Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
DIN EN ISO 4892-3 - Fluorescent UV lamps Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
DIN EN ISO 4920 - Determination of resistance to surface wetting (Spray test) Textile fabrics - Determination of resistance to surface wetting (Spray test)
DIN EN ISO 5077 - Determination of dimensional change Textiles - Determination of dimensional change in washing and drying
DIN EN ISO 5079 - Tensile properties of individual fibres Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres
DIN EN ISO 5084 - Determination of thickness Textiles - Determination of thickness of textiles and textile products
DIN EN ISO 527-2 (Test in tempering chamber - in cold) - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (Test in tempering chamber - in cold)
DIN EN ISO 527-2 (Test in tempering chamber - in heat) - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (Test in tempering chamber - in heat)
DIN EN ISO 527-2 - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
DIN EN ISO 527-3 - Tensile properties Plastics - Determiantion of tensile properties - Part 3: Text conditions for films and sheets
DIN EN ISO 527-4 (Test in tempering chamber - in heat) - Tensile properties Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (Test in tempering chamber - in heat)
DIN EN ISO 527-4 - Tensile properties Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DIN EN ISO 527-5 - Tensile properties Plastics - Determiantion of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
DIN EN ISO 5398-4 - Determination of chromic oxide content Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES)
DIN EN ISO 5402 - Flex resistance (Flexometer method) Leather - Physical and mechanical tests - Determination of flex resistance by Flexometer method
DIN EN ISO 5402-1 - Permanent folding (Flexometer method) Leather - Determination of flex resistance - Part 1: Flexometer method
DIN EN ISO 5402-1 - Permanent folding (Flexometer method) Leather - Determination of flex resistance - Part 1: Flexometer method
DIN EN ISO 5470-1 - Determination of abrasion resistance (Taber abrader) Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
DIN EN ISO 5470-1 - Determination of abrasion resistance (Taber abrader) Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader
DIN EN ISO 5470-2 - Abrasion test (Martindale) Rubber or plastic coated fabrics - Determiation of abrasion resistance
DIN EN ISO 604 - Compressive Properties Plastics - Determination of compressive properties
DIN EN ISO 62 - Water absorption Plastics - Determination of water absorption
DIN EN ISO 6245 - Determination of ash Mineral oil products - Determination of ash (775°C)
DIN EN ISO 6270-2-AHT - Condensation climate with alternating humidity and air temperature Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation climate with alternating humidity and air temperature)
DIN EN ISO 6270-2-AT - Condensation climate with alternating air temperature Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation climate with alternating air temperature)
DIN EN ISO 6270-2-CH - Condensation atmosphere with constant humidity Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (Condensation atmosphere with constant humidity)
DIN EN ISO 6270-2-CH - Condensation atmosphere with constant humidity Paints and vanishes- Determination of resistance to humidity- part 2 : Condensation (in-cabinet exposure with heated water reservoir)
DIN EN ISO 6330 - Domestic washing and drying procedures for textile testing Textiles - Domestic washing and drying procedures for textile testing
DIN EN ISO 6330 - Domestic washing and drying procedures for textile testing Textiles - Domestic washing and drying procedures for textile testing
DIN EN ISO 6427 (ISO 6427 : 1992) - Determination of matter extractable by organic solvents Plastics - Determination of matter extractable by organic solvents (conventional methods)
DIN EN ISO 6507 - Vickers hardness test Metallic materials - Vickers hardness test - Part 1: Test method; Part 2: Verification and calibration of testing machines; Part 3: Calibration of reference blocks; Part 4: Tables of hardness values
DIN EN ISO 6603-1 - Puncture impact behaviour - Non-instrumented impact testing Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing
DIN EN ISO 6603-2 - Puncture impact behaviour - Instrumented impact testing Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test
DIN EN ISO 6721-2 - Determination of dynamic mechanical properties (Torsion-pedulum method) Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pedulum method
DIN EN ISO 6941 - Burn behaviour (vertical) Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
DIN EN ISO 6942 - Evaluation of materials and material assemblies when exposed to a source of radiant heat Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
DIN EN ISO 6988 - Sulfur dioxide test with general condensation of moisture Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
DIN EN ISO 75-1 - Determination of temperature of deflection under load (General test method) Plastics - Determination of temperature of deflection under load - Part 1: General test method
DIN EN ISO 75-2 - Determination of temperature of deflection under load Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
DIN EN ISO 75-2 - Determination of temperature of deflection under load (Plastics and ebonite) Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
DIN EN ISO 7854 (Method A) - Flexural resistance Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Beständigkeit gegen Beschädigung durch Biegen
DIN EN ISO 787-10 - Determination of density (Pyknometer method) General methods of test for pigments and extenders - Part 10 : Determination of density (Pyknometer method)
DIN EN ISO 787-2 - Determination of matter volatile at 105 °C General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 ° C
DIN EN ISO 787-3 - Determination of matter soluble in water (Hot extraction method) General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water (Hot extraction method)
DIN EN ISO 787-5 - Determination of oil absorption value General methods of test for pigments and extenders - Part 5: Determination of oil absorption value
DIN EN ISO 787-9 - Determination of pH value General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension
DIN EN ISO 8067 - Determination of tear strength Flexible cellular polymeric materials - Determination of tear strength
DIN EN ISO 8067-A - Tear strength (trouser-shaped test specimens) Flexible cellular polymeric materials - Determination of tear strength - Method A (trouser-shaped test specimens)
DIN EN ISO 8067-B - Tear strength (angle test specimens) Flexible cellular polymeric materials - Determination of tear strength - Method B (angle test specimens)
DIN EN ISO 811 - Hydrostatic pressure test Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test
DIN EN ISO 8256 (tensile­impact strength unnotched) - Determination of tensile­impact strength Plastics - Determination of tensile-impact strength (unnotched)
DIN EN ISO 8295 - Determination of the coefficients of friction Plastics - Film an sheeting - Determination of the coefficients of friction
DIN EN ISO 845 - Determination of apparent density Cellular plastics and rubbers - Determination of apparent density
DIN EN ISO 846-A - Action of microorganisms - method A Plastics - Evaluation of the action of microorganisms; Method A: Fungal growth test
DIN EN ISO 846-B - Evaluation of the action of microorganismes - procedure B Plastics - Evaluation of the action of microorganisms; Method B: Fungi static effect
DIN EN ISO 846-C - Evaluation of the action of microorganismes - procedure C Plastics - Evaluation of the action of microorganisms; Method C: Resistance against bacteria
DIN EN ISO 8510-2 - Peel test (180 degree) Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel
DIN EN ISO 868 (Shore A) - Determination of Shore A hardness Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness A)
DIN EN ISO 868 (Shore D) - Determination of Shore D hardness Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness D)
DIN EN ISO 877-1 / -2 Procedure A (central European) - Weathering in central European climate Plastics - Methods of exposure to solar radiation - Part 1: General guidance / Part 2: Direct weathering and exposure behind window glass; Weathering in central European climate
DIN EN ISO 877-1 / -2 Procedure A (Kalahari) - Weathering in Kalahari climate (dry-hot climate) Plastics - Methods of exposure to solar radiation - Part 1: General guidance / Part 2: Direct weathering and exposure behind window glass; Weathering in Kalahari climate (dry-hot climate)
DIN EN ISO 899-1 - Determination of creep behavior Plastics, Determination of creep behavior, part 1: Tensile creep
DIN EN ISO 8993 - Rating system for the evaluation of pitting corrosion Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method
DIN EN ISO 9073-15 - Air permeability Textiles - Test methods for nonwovens - Part 15: Determination of air permeability
DIN EN ISO 9073-18 - Tensile properties (grab tensile test) Textiles - Testmethods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
DIN EN ISO 9073-2 (based on) - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness
DIN EN ISO 9073-2 - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness
DIN EN ISO 9073-2 Method A - Determination of thickness Textiles - Test methods for nonwovens - Part 2: Determination of thickness (Method A)
DIN EN ISO 9073-4 - Determination of tear resistance (Trapezoid tear strength) Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (Trapezoid tear strength)
DIN EN ISO 9142 - D2 - Cyclic aging Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints - Cycle D2: Heat, cold (thermal shock) and moisture cycle
DIN EN ISO 9142 - E2 - Cataplasm ageing (moist compress) Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints - Cycle E2: Exposure to water with a moist compress
DIN EN ISO 9227-AASS - Acetic acid salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Acetic acid salt spray test, AASS test)
DIN EN ISO 9227-CASS - Copper-accelerated salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Copper-accelerated salt spray test, CASS test)
DIN EN ISO 9227-NSS - Neutral salt spray test Corrosion tests in artificial atmospheres - Salt spray tests (Neutral salt spray test, NSS test)
DIN EN ISO 9237 - Permeability of fabrics to air Textiles - Determination of the permeability of fabrics to air
DIN EN ISO 9863-1 - Determination of thickness Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
DIN EN ISO 9864 - Determination of mass per unit Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
DIN IEC 60093 / VDE 0303-30 - volume resistivity and surface resistivity of solid electrical insulating materials Methods of test for insulating materials for electrical purposes - Volume resistivity and surface resistivity of solid electrical insulating materials
DIN IEC 60167/ VDE 0303-31 - Insulation resistance Test methods for electrical insulation materials - Insulation resistance of solid insulating materials
DIN ISO 10694 - Determination of organic and total carbon Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
DIN ISO 12219-6 - Bestimmung organischer Emissionen Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method (Is carried out as an additional method in connection with the chamber emission test according to ISO 12219-4.)
DIN ISO 12219-7 - Determination of the olfactory behavior Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements (The odor test is carried out in connection with the chamber emission test acc. to DIN ISO 12219-4.)
DIN ISO 12884/ VDI 4300-2 - Sampling for PAH Ambient air - Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/ mass spectrometric analysis (Sampling for PAH)
DIN ISO 1431-1/ ISO 1431-1 (procedure B) - Ozone resistance Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
DIN ISO 16000-3 - Determination of formaldehyde and other carbonyl compounds Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method
DIN ISO 16000-3 / VDI 4300-3 - Indoor air sampling of carbonyl compounds Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds - Active sampling method (Indoor air pollution measurment - general aspects of formaldehyde measurements strategy)
DIN ISO 16000-6 / TDS-GC-MSD (GC-sniffing) - Determination of volatile organic compounds Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on TENAX® sorbent, thermal desorption and gas chromatography using MS/FID
DIN ISO 16000-6 / TDS-GC-MSD - Determination of volatile organic compounds (VOC) Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on TENAX TA® sorbent, thermal desorption and gas chromatography using MS/FID
DIN ISO 1817 - Effect of liquids Rubber, vulcanized - Determination of the effect of liquids
DIN ISO 1817 - Effect of liquids Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
DIN ISO 1887 - Determination of combustible matter content Textile glass - Determination of combustible matter content
DIN ISO 2285 - Determination of tension set under constant elongation Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep unter constant tensile load (here: constant elongation)
DIN ISO 2285 - Tension set under constant elongation Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep unter constant tensile load (here: constant elongation)
DIN ISO 2796 - Test for dimensional stability Cellular plastics, rigid - Test for dimensional stability
DIN ISO 34-1-A - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-A - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Procedure A: Trouser test specimens)
DIN ISO 34-1-A - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-A - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method A: Trouser test piece)
DIN ISO 34-1-B - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece)
DIN ISO 34-1-B - Determination of tear strength Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Procedure B: Angle test specimens)
DIN ISO 34-1-B - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece)
DIN ISO 34-1-B - Determination of tearing force Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (Method B: Angle test piece)
DIN ISO 3415 - Thickness loss Textile floor coverings - Determination of thickness loss after brief, moderate static loading
DIN ISO 3451-2 - Ash content Plastics - Determination of ash - Polyalkylene terephthalates
DIN ISO 3451-3-A - Ash content in unplasticized cellulose acetate Plastics - Determination of ash - Part 3: Unplasticized cellulose acetate (Method A: direct ash)
DIN ISO 3733 - Determination of water - Distillation method Petroleum products and bituminous materials - Determination of water - Distillation method
DIN ISO 3865-A1 - Contact and migration staining without irradiation Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material; Method A1: Contact and migration staining without irradiation
DIN ISO 4532 / ISO 4532 - Pistol test Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test
DIN ISO 48 - Determination of hardness Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Method H: Test at high hardness, Method L: Test at low hardness, Method M: Microhardnesstest but NOT method N: normal test
DIN ISO 48 - Determination of hardness Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD); Method H: Test at high hardness, Method L: Test at low hardness, Method M: Microhardness test but NOT method N: normal test
DIN ISO 6133 Procedure B - Analysis of multipeak traces Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion
DIN ISO 7619-1 (Shore A) - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
DIN ISO 7619-1 (Shore A) / testing in cold - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in cold
DIN ISO 7619-1 (Shore A) / testing in heat - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in heat
DIN ISO 7619-1 (Shore D) - Determination of Shore D hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
DIN ISO 7743-A - Compression stress-strain properties, Method A Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties; Method A: Standard test specimen with lubricated metal plates
DIN ISO 7743-B - Compression stress-strain properties, Method B Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties; Method B: Standard test specimen with on test specimen bonded metal plates
DIN ISO 815 - Determination of compression set Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
DIN ISO 815-1 - Determination of compression set Elastomers or thermoplastic elastomers - Determination of compression set - Part 1: At ambient or elevated temperatures
DIN ISO 815-2 - Determination of compression set Elastomers or thermoplastic elastomers- Determination of compression set - Part 2: At low temperatures
DIN ISO 815-2 - Determination of compression set Elastomers or thermoplastic elastomers- Determination of compression set - Part 2: At low temperatures
DIN ISO 8296 - Determination of wetting tension Plastics - Film and sheeting - Determination of wetting tension
DIN ISO 9354 - Coding system of waves Textiles - Weaves - Coding system and examples
DIN V 53160-1 - Resistance to artificial saliva Determination of the colourfastness of articles in common use - Part 1: Resistance to artificial saliva
DIN V 53160-2 - Resistance to artificial sweat Determination of the colourfastness of articles in common use - Part 2: Resistance to artificial sweat
Disassembling force Disassembling force (according customer requirements)
Displacement distance Displacement distance (according customer requirements)
Displacement force Displacement force (according customer requirements)
DLE/Dräger-test tube; on-site - Dräger air extraction Dräger air extraction
Domestic washing and drying procedures Textiles - Domestic washing and drying procedures for textile testing
Draw-off force/mount force (according customers requirememt) Draw-off force / mount force (acc. to drawing)
Drop test Drop test
Drop test Drop test (dropping a component on the floor, e.g. Volvo TR 31825672 § 1.6.14)
Dry respectively wiping scratch resistance - Scratch resistance of coatings: Crockmeter test Scratch resistance of coatings in the dry state (wiping scratches)
Dräxlmaier DRX DVM-6100230-1 - Sun cream resistance Sun cream resistance of painted parts in the interior
Dubpernell method - Copper sulfate test, galvanostatic Dubpernell method (crack density, pore density)
Dynamic mechanical analysis (DMA)
E-DIN 55660-2 - Determination of the free surface energy of solid surfaces Paints and varnishes - Wettability - Part 2: Determination of the free surface energy of solid surfaces by measuring the contact angle
ECE R118 Appendix 6 - Burning behaviour Uniform technical prescriptions concerning the burning behavior of interior materials of certain categories of motor vehicles; Appendix 6: Test to determine the horizontal burning rate of materials
ECE R118 Appendix 7 - Determination of melting behaviour Uniform technical prescriptions concerning the burning behavior of interior materials of certain categories of motor vehicles; Appendix 7: Test to determine the melting behavior of materials
ECE R118 Appendix 8 - Burn behaviour (vertical) Uniform technical prescriptions concerning the burning behavior of interior materials of certain categories of motor vehicles; Appendix 8: Test to determine the vertical burning rate of materials
Electrostatic charge Electrostatic charge
EN 15702 - Determination of the foam cell count Cellular plastics - Cell count procedure for flexible and rigid polyurethane
Endurance test Endurance test
Evaluation after outdoor weathering Evaluation after outdoor weathering
Evaluation of fiber deterioration after exposure to light Fiber deterioration after prior stress
EvoBus, Resistance to cleaning agents, part 1 based on DBL 5399 § 3.2: Soiling and cleaning behavior, Daimler - Test methods for interior materials and simular products
EvoBus, Soiling and Cleanability - Part 3 - (with liquid test media) based on DBL 5399 § 3.3 + 3.4: Soiling and cleaning behavior, Daimler - Test methods for interior materials and simular products
EvoBus, Soiling and Cleanability Part 2 + Part 3 - (with soiling fabric) Following DBL 5399 § 3.3 + 3.4: Textile (for normal load): Soiling and cleaning behavior, Daimler - Test methods for interior materials and simular products
expansion of candidate substances SVHC ECHA 13 candidate substances SVHC ECHA from publication 2012-06-18
External Processing External Processing
Fastness to rubbing (crockmeter) Fastness to rubbing (crockmeter, abrasion)
Fastness to water spotting Genrell test method - Fastness to water spotting (e.g. BMW GS 93026-1)
FCA 50451/ LP.7M006 - Method A (WOM / Xenon arc) - Accelerated weather resistance test (for exterior parts) Accelerated aging by atmospheric agents, Method A
FCA 7.M9001 / LP.7M042 (Test 2) - Cold bending test Surface treated rubber sections, Cold bending test
FCA 7.M9001 / LP.7M042 (Test 3) - Tensile properties Surface treated rubber sections, Elongation strength test
FCA 7.M9001 / LP.7M042 (Test 4) - Cross-hatching incision test Surface treated rubber sections, Adhesion test
FCA LP-463DD-18-02 / Method A (Scratch) - Scratch resistance / cross cut Scratch and mar resistance of automotive plastics using Erichsen scratch hardness tester, § 11.1 Method A
FCA LP-463DD-18-02 / Method B (Mar) - Mar resistance / cross cut Scratch and mar resistance of automotive plastics using Erichsen scratch hardness tester, § 11.2 Method B
FCA LP.7M052 - Determination of staining Automotive fluids staining of plastics - determination of
FCA MS.90095 Part B ( Fiat 7-G2000) - burning behaviour FCA MS.90095: Resistance to Combustion of the non-metallic materials Part B (Fiat 7-G2000) Determining the resistance to combustion of the non-metallic materials for parts inside vehicle passenger compartment
FCA PS.50014 § 4.5.2.5 - Cyclic corrosion test with CASS salt spray test Copper-Nickel-Chromium (Chromium-Plating) Coating of Thermoplastic Parts § 4.5.2.5 Cyclic corrosion test with CASS salt spray test acc. to ASTM B368 (for platings acc. to Methods 1A and 1B only)
Fiat 50180 method A1 - Salt spray test Corrosion tests - method A1: Salt spray test
Fiat 50180 Method A3 - Copper-accelerated acetic acid salt spray test (CASS-Test) Corrosion tests - Method A3: Copper-accelerated acetic acid salt spray test (CASS-Test)
Fiat 50184-A - Dry heat test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method A (Dry heat test)
Fiat 50184-B - Damp heat test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method B (Damp heat test)
Fiat 50184-C - Low temperature test Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method C (Low temperature test)
Fiat 50184-D - Temperature cycling Requirements for nonmetals - Environmental tests for paints, enamels, etc.; Method D (Temperature cycling)
Fiat 50423 § 2 - Compression Deflection Test for compression-deflection, compression/tension set and apparent density of expanded cellular materials
Fiat 50423 § 3.1 - Compression test Test for compression-deflection, compression/tension set and apparent density of expanded cellular materials
Fiat 50438 - Permanent folding (Fatigue Test, Bally Flex Test) Bally Fatigue Test for Letaher and Imitation Leather
Fiat 50440 - Mass determination Mass determination - Fabrics, waterproof fabrics, leather, imitation leathers and vinyl sheets
Fiat 50441/05 - Adhesion test Separation resistance - Trim materials and associated backing mated with polyurethane sheet
Fiat 50444 § 1.1.2 (Crockmeter) - Color fastness to rubbing Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.1.2 Crock test, color fastness to rubbing
Fiat 50444 § 1.1.2 (Crockmeter) - Color fastness to rubbing Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.1.2 Crock test, color fastness to rubbing
Fiat 50444 § 1.2 - Hot aging Genuine leather, imitation leather and vinyl sheeting: color fastness and aging test - § 1.2 Hot aging
Fiat 50451 (Xenon arc lamps) - Artifical weathering Accelerated weathering test (Xenotest)
Fiat 50451/01 - Method A (carbon arc) - Accelerated ageing, Fade-ometer Accelerated ageing in sunlight; Method A: Fade-ometer
Fiat 50451/01 - Method B (xenon arc) - Accelerated ageing, Xenotest Accelerated ageing in sunlight; Method B: Xenotest
Fiat 50455-08 - Amine contamination resistance Amine contamination resistance
Fiat 50455/10 - Determination of fabric abrasion resistance by the Taber method Determination of fabric abrasion resistance by the Taber method
Fiat 50457 - Gloss measurement Tests for nonmetallic materials - Specular gloss determination for paints, varnishes and enamels by glossmeter
Fiat 50461 - Cross-cut test Adhesion test of inorganic and organic trims by squaring off
Fiat 50470 - Water resistance test Water resistance test for decorations and paints
Fiat 50471/01 - Artificial weathering Alternating Ultraviolet Radiation / Humidity Resistance Test
Fiat 50473 - Resistance to chemical agents Determination of the Resistance to Gasoline of Paints, Enamels and Related Products
Fiat 50473/01 - Method A - Resistance to chemical agents Determination of the Resistance to Chemical Agents of Products, § 3.1 Method A (sulfuric acid)
Fiat 50473/01 - Method B - Resistance to chemical agents Determination of the Resistance to Chemical Agents of Products, § 3.2 Method B (windscreen washer)
Fiat 50473/01 - Method C - Resistance to chemical agents Determination of the Resistance to Chemical Agents of Products, § 3.3 Method C (mineral oil)
Fiat 50496 - Colour fastness in water Textiles: Colour fastness in water of automobile interior fabrics
Fiat 7-G2000 - Burning behaviour Determining the resistance to combustion of the non-metallic materials for parts inside vehicle passenger compartment
Fiat 7-G2090-A - Determination of Formaldehyde content Vehicle interior components - Formaldehyde release test - Acetyl acetone method - materials: Type A
Fiat 7-G2090-B - Determination of Formaldehyde content Vehicle interior components - Formaldehyde release test - Acetyl acetone method - material: Type B
Fiat 7-M0001 - Colour measurement (CIELAB) Colour evaluation on aesthetic surfaces in plastic
Fiat 7-M0002 / Fiat 7.M0001 - Gloss measurement / colour meausrement Evaluation the gloss of plastics / Colour evaluation on aesthetic surfaces in plastic
Fiat 7-M0003 - Evaluation of the embossing Evaluation of the embossing of plastic materials
Fiat 7-M0005 - Resistance to scratching Molded plastic trim components - Resistance to scratching (followed by a colour measurement)
Fiat 7-M8607 - Rotting evaluation Pre-formed textile material - Rotting evaluation
Fiat 7.G2091 - Determination of free Phenol-content Phenolic resin base materials - Free phenol content
Fiat 7.M8300 § 1.4 - Indentation load deflection on specimens Cellular polyurethane padding for motor vehicle seat cushions and backs; § 1.4: Indentation load deflection on specimens
Fiat 7.M8300 § 1.6 - Compression set Cellular polyurethane padding for motor vehicle seta cushions and backs; § 1.6 Compression set
Fiat 9.03160 § 2.17 - Rot resistance Preformed car headliners; § 2.17: Rot resistance
Fiat 9.03162 § 2.12 - Wear Resistance Handgrip for gearbox lever (assembly); § 2.12: Wear resistance
Fiat 9.03168 § 2.20 - Resistance to chemical agents Armrests and fixed handles on door panels - § 2.20 Resistance to chemical agents
Fiat 9.03176-01 § 2.11.6.2 - Chemical agents resistance (crock meter test AATCC 8) Safety belts (assembly); § 2.11.6.2: Resistance to chemical agents for the tape homologation label
Fiat 9.55253 § 2.7.2 - Surfactant - Resistance to test medium Specification for miscellaneous plastic components; § 2.7.2: Surfactant - Resistance to test medium
Fiat 9.55842-01 § 2.19 - Resistance to wear Aesthetic and operational finishing of parts made of plastic materials obtained by painting or other processes; § 2.19: Resistance to wear
Fiat/Chrysler CS-A0228 - Odor test Odor evaluation of parts, components and assemblies
Fiat/Chrysler LP 463KC-04-01 (Procedure 1) - Grease cleanability Cleanability of Interior Trim § 1. Procedure 1 - Grease cleanability
Fiat/Chrysler LP 463KC-04-01 (Procedure 3) - Resistance to cleaning agents (Crockmeter) Cleanability of Interior Trim § 3. Procedure 3 - Crock cleaning of vinyl coated fabrics, leather, and coated boards
Fiat/Chrysler LP-463KC-04-01 Procedure 2 - General cleanability Cleanability of Interior Trim § 2. Procedure 2 - General cleanability of trim materials
Fiat/Chrysler LP-463KC-09-01 - dry - Odor test Odor evaluation of interior trim materials - procedure: dry
Fiat/Chrysler LP-463KC-09-01 - Odor test Odor evaluation of interior trim materials
Fiat/Chrysler LP-463KC-09-01 - wet - Odor test Odor evaluation of interior trim materials - procedure: wet
Film thickness (microscopy) Film thickness (microscopy)
Filter paper test Filter paper test
Flexural stress Flexural stress
Float wear (acc. to customer's requirement, Bosch company) - Abrasion behaviour Effect of mechanical stress (friction) on the fuel float of the level sensor
Flock identification (qualitative pretest) Flock identification
FMVSS 209 § 5.1.e - Resistance to light Federal Motor Vehicle Safety Standard - Seat belt assemblies; § 5.1.e - Resistance to light
FMVSS 302 / US 571.302 (TP 302-03) - Burning behaviour Flammability of interior materials
Foam adhesion, manual
Footfall examination Footfall examination under temperature influence (eg, Daimler FuVo A 001 001 90 99 cover strip)
Ford BZ 108-01 - Determination of volatile organic compounds 10-L Bag Method for Measuring VOC Emissions from Vehicle Interior Materials
Ford CETP-00.00-L-467 - Corrosion test Global Laboratory Accelerated Cyclic Corrosion Test
Ford Crease test Engineering Material Specification - Crease Test - WMD and AMD
Ford DVM-0007-MA-D - Coating adhesion, Methode D (Scribe Test) Coating adhesion test; Method D: Scribe Test
Ford DVM-0017-MA - Soiling and cleaning behavior Soiling and cleaning behavior of interior materials
Ford DVM-0019-MA - Scratch Resistance Scrat Resistance
Ford DVM-0033-SH - Cold temperature set test Cold temperature set test (Floor mat samples / carpet)
Ford DVM-0036-MA - Sunscreen resistance test Sunscreen resistance test
Ford DVM-0039-MA - Insect repellent resistance Insect repellent resistance
Ford DVM-0055-MA - Abrex Abrasion Test Abrex Abrasion Test
Ford ES-D8VH-19A672-AA-§ IIIA - Resistance to fungal growth Biostatic effectiveness and biostatic concentration of materials used in an air conditioning assembly such as adhesives, foam, expanded rubber or other synthetic polymeric materials
Ford EU AN 1-1 (Water spotting) - Water spotting test Resistance of Textiles to Bleeding, Perspiration and Water Spotting
Ford FLTM AN 101-01 (perspiration) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water spotting) - Resistance to water spotting Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM AN 101-01 (water) - Resistance to bleeding and perspiration Resistance of textiles to bleeding, perspiration and water spotting
Ford FLTM BI 009-05 - Bending test Bending Test for Coating Adhesion
Ford FLTM BI 103-01 - Salt spray resistance test Salt spray resistance test for painted panels and parts (gem. ASTM B 117)
Ford FLTM BI 104-01 - Water immersion test Water immersion test for painted parts and panel
Ford FLTM BI 104-02 - Condensing water vapor test Condensing water vapor test
Ford FLTM BI 106-01-A - Coating adhesion test, Paint adhesion test, Method A (Scratch Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method A (Scratch Test)
Ford FLTM BI 106-01-B - Coating adhesion test, Paint adhesion test, Method B (Scribe Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method B (Scribe Test)
Ford FLTM BI 106-01-B - Scribe test Coating adhesion test, Method B (Scribe Test)
Ford FLTM BI 106-01-C - Coating adhesion test, Paint adhesion test , Method C (Parallel Scratch Test) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method C (Parallel Scratch Test)
Ford FLTM BI 106-01-D - Adhesion test Coating adhesion test, Method D (Adhesion Test for Flexible Coatings)
Ford FLTM BI 106-01-D - Coating adhesion test, Paint adhesion test , Method D (Scribe Test for Two-Component Urethane Coatings) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method D (Scribe Test for Two-Component Urethane Coatings)
Ford FLTM BI 106-01-D - Coating adhesion test, Paint adhesion test, Method D (Adhesion Test for Flexible Coatings) Coating adhesion test (for coatings and paint to steel, aluminium, galvanized steel, plastic or other substrates), Method D (Adhesion Test for Flexible Coatings)
Ford FLTM BI 106-01-E - Coating Adhesion test Methode E Adhesion of coatings (for coatings and finishes on steel, aluminum, galvanized steel, plastic or other substrates), Method E (adhesion test for parting lines, radius and edges)
Ford FLTM BI 106-03 - Hydrolysis resistance Hydrolysis resistance of painted plastic panels
Ford FLTM BI 109-01 - Color matching with artificial light Color matching with artificial light
Ford FLTM BI 109-01 - Visual appearance evaluation Visual appearance evaluation
Ford FLTM BI 109-03 - Color measurement Color difference evaluation of textile materials
Ford FLTM BI 110-01 - Gloss measurement Measurement of the gloss of paint panels
Ford FLTM BI 110-01 - Gloss measurement Measurement of the gloss of paint panels
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-01 - Water and soap spotting Water and soap spotting test for paint
Ford FLTM BI 113-02 - Resistance to acid spotting Resistance to acid spotting
Ford FLTM BI 113-03 - Resistance to synthetic perspiration staining Resistance to synthetic perspiration staining
Ford FLTM BI 113-05 - Resistance to acid spotting Resistance to acid spotting of painted test panels or actual finished parts
Ford FLTM BI 113-06 - Resistance to perspiration Test method for resistance to perspiration
Ford FLTM BI 113-07 - Resistance to synthetic perspiration staining Resistance to synthetic perspiration staining
Ford FLTM BI 113-08 - Resistance to sunscreen lotion and insect repellent Resistance to sunscreen lotion and insect repellent
Ford FLTM BI 113-08 - Resistance to sunscreen lotion and insect repellent Resistance to sunscreen lotion and insect repellent
Ford FLTM BI 123-01 - Corrosion Test Painted sheet metal corrosion test - Laboratory-Simulated Arizona Proving Ground Test
Ford FLTM BI 123-03 - Component corrosion test Component corrosion test (salt spray test)
Ford FLTM BI 157-06 - Stone chip resistance High performance stone chip resistance test, new rating scale
Ford FLTM BI 161-01 - Mar Resistance Mar resistance determination for automotive coatings
Ford FLTM BI 168-01 - Fluid resistance Fluid resistance of chassis and exterior materials for incidential exposure
Ford FLTM BI 168-01 - Fluid resistance Fluid resistance of chassis and exterior materials for incidential exposure
Ford FLTM BN 024-02 - Flammability Flammability test for automotive interior materials
Ford FLTM BN 102-01-A - Low temperature flexibility Polymeric materials, low temperature flexibility
Ford FLTM BN 102-02 - Flexural test Flex test for polymeric coated fabrics, genuine leathers and woven fabrics
Ford FLTM BN 103-01 - Resistance to migration staining and blocking Resistance of coated fabrics and plastic film to migration staining and blocking
Ford FLTM BN 105-01 - Shrinkage test Shrinkage test for textiles and artificial leathers
Ford FLTM BN 105-03 - Dimensional stability Dimensional stability of textile trim materials
Ford FLTM BN 106-01-A - Determination of the mass per unit area Determination of weight per unit area and density of trim materials (here: weight per unit area)
Ford FLTM BN 106-01-B (contains Proc. A) - Determination of density Determination of weight per unit area and density of trim materials
Ford FLTM BN 106-02 - Seam Deterioration (Fatigue) Seam Fatigue Testing
Ford FLTM BN 106-02 - Seam Fatigue Seam Fatigue Testing
Ford FLTM BN 107-01 - Crocking test Crocking Test
Ford FLTM BN 107-01 - Crocking test Crocking Test - instrumental evaluation
Ford FLTM BN 108-01 - Resistance of textile fabrics to abrasion (Stoll Quartermaster - Universal Wear Tester) Resistance of textile fabrics to abrasion - inflated diaphragm method (Stoll Quartermaster - Universal Wear Tester)
Ford FLTM BN 108-02 - Resistance to abrasion - Taber abraser Resistance to Abrasion - Taber Abraser
Ford FLTM BN 108-02 - Resistance to abrasion - Taber abraser Resistance to Abrasion - Taber Abraser
Ford FLTM BN 108-03 - Resistance to pilling Resistance to pilling
Ford FLTM BN 108-04 - Resistance to scuffing Resistance to scuffing
Ford FLTM BN 108-07 - Resistance to snagging (Taber) Resistance to snagging of trim materials (Taber abraser)
Ford FLTM BN 108-07 - Resistance to snagging (Taber) Resistance to snagging of trim materials (Taber abraser)
Ford FLTM BN 108-11 - Resistance to snagging (Mace test) Resistance to snagging - Mace test
Ford FLTM BN 108-13 - Resistance to scratching Resistance to scratching
Ford FLTM BN 112-03 - Degree of soil transfer Degree of soil transfer to leather and polymeric fabric´s
Ford FLTM BN 112-08 - Soiling & cleanability test for interior trim materials. Soiling & cleanability test for interior trim materials.
Ford FLTM BN 112-08 - Soiling and cleanability Soiling and cleanability test for interior trim materials
Ford FLTM BN 112-08 - Soiling and cleanability Soiling and cleanability test for interior trim materials
Ford FLTM BN 112-08 - Soiling and cleanability Soiling & Cleanability Test for Interior Trim Materials
Ford FLTM BN 112-12 - Resistance to staining Resistance to Staining of seating farbrics
Ford FLTM BN 112-12 Methode A - Resistance to staining Resistance to Staining of seating farbric; Method A
Ford FLTM BN 112-12-A - Resistance to staining Resistance to Staining of seating farbrics; Method A
Ford FLTM BN 112-12-B - Resistance to staining Resistance to Staining of seating farbric; Method B
Ford FLTM BN 113-01 - Bond strength of trim assemblies Bond strength of trim assemblies
Ford FLTM BN 113-03 - Heat aging (constant tensile load) Extended heat ageing of polymeric coated fabrics (constant tensile load)
Ford FLTM BN 114-01 - Thickness measurement Thickness test for automotive textile materials
Ford FLTM BN 115-07 - Compression set Compression set of polyurethane foam
Ford FLTM BN 117-03-A - Tensile strength after ageing, retained Tensile Strength Evaluation of trim materials after accelerated exposure in a controlled irradiance water cooled xenon arc apparatus; Method A: Tensile strength after ageing, retained Tensile Strength (GT-Klemmen)
Ford FLTM BN 117-03-B - Surface Fiber Deterioration Evaluation of trim materials after accelerated exposure in a controlled irradiance water cooled xenon arc apparatus; Method B: surface fiber deterioration
Ford FLTM BN 119-01 - Seam strenght Determination of seam strength of textile trim materials
Ford FLTM BN 119-01 - Seam strength Determination of seam strength of textile trim materials
Ford FLTM BN 121-01 - Bond strength test Bond strength test - Interior trim decorations
Ford FLTM BN 151-01-A - Welded seam strength/ peeling force (original state) Bond strength of trim assemblies - Method A (Original peel bond strength)
Ford FLTM BN 151-01-B - Welded seam strength/ peeling force (after aging) Bond strength of trim assemblies - Method B (Peel bond strength after aging)
Ford FLTM BN 151-01-C - Welded seam strength/ peeling force (after humidity exposure) Bond strength of trim assemblies - Method C (Peel bond strength after humidity exposure)
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength
Ford FLTM BN 151-05 - 180 degree peel adhesion strength Determination of 180 degree peel adhesion strength
Ford FLTM BN 151-05 - Peel adhesion strength (180°) Determination of 180 degree peel adhesion strength of laminates
Ford FLTM BN 151-06 - Adhesion strenght (90°) Determination of 90° Adhason strength of interior materials to rigid or flexible substrates
Ford FLTM BN 153-1 - Liquid repellency test liquid repellency coating verification test
Ford FLTM BN 155-01 - Resistance to simulated finger tip abrasion Resistance to simulated finger tip abrasion (Abrex)
Ford FLTM BN 156-01 - Electrical resistance test (surface resistance) Electrical resistance test for textiles (surface resistance)
Ford FLTM BN 158-01 - Martindale abrasion test Martindale abrasion testing of textile fabrics
Ford FLTM BN 162-01 - Permanent folding (Bally Flex Test) Bally Flex Test for automotive seat cover materials
Ford FLTM BO 040-01, Procedure A - Short term environmental cycling Short and long term environmental testing
Ford FLTM BO 040-01, Procedure A - Short term environmental cycling (Heat, humidity and cold cycle) Änderung gegenüber Ausgabe 2016-07: zusätzliche Anforderung für Horizontale oder vertikale Teile auf oder oberhalb der Gurthöhe, speziell für Himmel und Dachkonsole 90 °C
Ford FLTM BO 040-01, Procedure B - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing/Sun load: Heat ageing
Ford FLTM BO 040-01, Procedure B - Long term heat exposure Short and long term environmental testing, Procedure B - long term environmental testing/Sun load: Heat storage
Ford FLTM BO 061-01 - Determination of tackiness Determination the tackiness of interior materials
Ford FLTM BO 101-05 - Fuel resistance Determination of fuel resistance of plastic parts
Ford FLTM BO 111-02 - Test for indentation and recovery Test for indentation and recovery
Ford FLTM BO 113-03 - Load deflection test Load deflection test
Ford FLTM BO 116-01 - Light fastness Resistance to interior weathering (Exposure of interior trim materials in a controlled irradiance water cooled xenon-arc apparatus)
Ford FLTM BO 116-01 - Light fastness Resistance to interior weathering (Exposure of interior trim materials in a controlled irradiance water cooled xenon-arc apparatus)
Ford FLTM BO 127-03 - Stress cracking test Stress cracking test for plastics
Ford FLTM BO 127-03 - Stress cracking test Stress cracking test for plastics
Ford FLTM BO 131-01 - Odor test Determination and assessment of odor from interior trim materials / components / assemblies
Ford FLTM BO 131-03 (Condition 1) - Interior Odor test Interior odor test (Condition 1, 23 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 2) - Interior Odor test Interior odor test (Condition 2, 40 °C)
Ford FLTM BO 131-03 (Condition 3) - Interior Odor test Interior odor test (Condition 3, 80 °C)
Ford FLTM BO 131-03 (Condition 3) - Interior Odor test Interior odor test (condition 3: 2 h at 65 °C)
Ford FLTM BO 131-03 (Condition 4) - Odor Test Interior Odor test
Ford FLTM BO 131-03 (Variante 1) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Variante 2) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 (Variante 3) - Interior Odor test Ford, Interior odor test
Ford FLTM BO 131-03 - Interior odor test Interior odor test
Ford FLTM BO 151-01-A - Ball drop test (rubber ball) Resistance to low temperature impact (Ball drop test); Method A: rubber ball
Ford FLTM BO 151-01-B - Ball drop test (steel ball) Resistance to low temperature impact (Ball drop test); Method B: steel ball
Ford FLTM BO 160-04-A - Resistance to high pressure cleaning operations Resistance of painted plastic parts to high pressure cleaning operations
Ford FLTM BO 162-01 - Scratch resistance Resistance to scratch and marring
Ford FLTM BO 163-01 - Denting test (Impact test) Denting test for Interior Parts with Metal Appliques
Ford FLTM BP 101-01 - Degradation by ozone Rubber - Degradation by ozone
Ford FLTM BQ 007-02 - Acid dissolution test for aluminium parts Acid dissulotion test for decorative aluminium parts
Ford FLTM BQ 104-07 - Climate cycle test Environmental Test Cycles (only procedures 1 to 6)
Ford FLTM BQ 104-07, Procedure 9 - Climate cycle test Environmental Test Cycles, procedure 9
Ford FLTM BU 101-06-A - Dynamic Shear Test Dynamic Shear Test of pressure sensitve tapes (Method A)
Ford FLTM BU 101-06-B - Static Shear Test Static Shear Test of pressure sensitve tapes (Method B)
Ford FLTM BU 112-02 / Method B - T-peel adhesion test Peel adhesion of pressure sensitive tapes - Method B - 180° or T-peel adhesion on component
Ford FLTM BZ 108-01 - Determination of volatile organic compounds 10L- Bag method test for measuring the emissions of volatile organic compounds from vehicle interior materials
Ford FLTM BZ 156-01-A (Photometry) - Determination of formaldehyde emission Determination of formaldehyde, aldehyde and ketone emissions from non metallic components, parts and materials in the vehicle interiors; Part A: Photometric determination of formaldehyde emission
Ford FLTM BZ 156-01-B (HPLC) - Determination of aldehyde and ketone emission Determination of formaldehyde, aldehyde and ketone emissions from non metallic components, parts and materials in the vehicle interiors; Part B: Determination of aldehyde and ketone emission by high performance liquid chromatography
Ford FLTM BZ 157-01 (VDA 277) - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors by Headspace Gas Chromatography (TVOC)
Ford IP-0105 / DVM-0038-IP - Sunload and heat age resistance Instrument panel - Sunload and heat age resistance (IR test: heat storage with infrared radiation)
Ford IP-0105 / DVM-0038-IP - Sunload and heat age resistance Instrument panel - Sunload and heat age resistance (IR test: heat storage with infrared radiation)
Ford IT-0815 (Ver. 10) / Ford DVM-0012-17 (Ver. 4) - Maximum Deflection & Rotation Interior Trim maximum Deflection & Rotation for Quality Feel
Ford MA-0015 / DVM-0027-MA / FLTM BO 127-03 (based on) - Stress cracking test Chemical compatibility (Stress cracking test for plastics)
Ford MA-0018 / DVM-0014-MA - Odour test Odour for seat belts
Ford OR-0329 (DVM-0048-OR) - Sunload resistance Sunload resistance - exterior Ornamentation / leafscreen (IR-Test)
Ford PA-0045 / DVM-0027-PA - Resistance to media Ford, Exterior topcoat solvent resistance / Exterior topcoat cure - solvent rub
Ford SH-0089 / SH-0103 - Coefficient of friction Modiefied throw-in-mat slippage test (static friction)
Ford TM 00.00-L-467 - Corrosion test Global Loboratory Accelerated Cyclic Corrosion Test
Ford WSK-M2D419-A § 3.4.5 - Cold flexibility Cellular Elastomer, Gasket; § 3.4.5: Cold flexibility
Ford WSK-M2D419-A § 3.4.9 / ABS (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (ABS) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.9 / PC (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (PC) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSK-M2D419-A § 3.4.9 / PMMA (based on FLTM BO 158-03) - Resistance of Plastics to Stress cracking by Gasket Material Cellular Elastomer, Gasket; § 3.4.9: Resistance of Plastics (PMMA) to Stress cracking by Gasket Material (based on FLTM BO 158-03)
Ford WSS M99P2222-C1 § 4.2 - Determination of formaldehyde / acraldehyde and acetaldehyde Performance, vehicle interior environment quality - C1: Component requirements; § 4.2: Formaldehyde / Acraldehyde and acetaldehyde after extraction according FLTM BZ 156-01by HPLC
Ford WSS-M16J9 § 3.6.5 - Light transmittance Ford WSS-M16J9-B: Paint, Basecoat/ Clearcoat over rigid substrates, Exterior § 3.6.5 Ultraviolet Light Transmittance
Ford WSS-M1P83-E2 § 3.8 - Cyclic corrosion test with CASS salt spray test Decorative chrome electroplated part performance requirements, ABS or PC/ABS substrates, General exterior use, § 3.8 Cyclic corrosion test with CASS test acc. to ASTM B368
Ford WSS-M99P32-B § 3.7 - Moisture Absorption Performance, acoustical and thermal assemblies; § 3.7: Moisture Absorption
Ford WSS-M9P10-B § 3.6.2 - Environmental cycling test Glass run weather-strip, belt line (inner/outer) weather-strips, sun roof seals, and static fixed glass weather-strip performance specification § 3.6.2 Environmental cycling test
Forming pressure/Press capacity (acc. customers requirement) Forming pressure / Press capacity (acc. customers requirement)
Freightliner DaimlerChrysler 49-00039 § 4.7 - Cyclic corrosion test with CASS salt spray test Cyclic corrosion test with CASS test acc. to ASTM B368
Fuhrmann test - Copper sulfate test, potentiostatic Metallic coatings - Electroplated coatings of nickel plus chromium and copper plus nickel plus chromium on plastics materials - Annex C3: Fuhrmann test (crack density, pore density)
Fuji TS-YKB-009 § 6-4-1-7 (Xenon light) - Accelerated weather resistance test Floor Mat (Rubber Mat), § 6-4-1-7: Weather resistance
Fuji TS345-05-011 § 4 Abrasion resistance - Abrasion resistance Testing method for carpet § 4 Abrasion resistance
Fuji TS420-00-002 - burning behavior Flammability of interior parts
Gap measurement (DIN 1319) Fundamentals of metrology (several parts); Gap measurement
Gas chromatography with mass-detection Gas chromatography with mass-detection
GC Gas chromatography
GC-ECD GC-ECD
GC-FID GC-FID
GC-FID/MSD GC-FID/MSD
GC-MSD - Gas chromatography with mass selective detection GC-MSD
GC-MSD Determination (liquid injection) GC-MSD liquid injection
GM 4465P - Water Fog Resistance Water Fog Humidity Test
GM 9515 P (based on ASTM D4060) - Abrasion resistance by the Taber Abraser Method Abrasion resistance of organic coatings (Taber Abraser Method); Modification of ASTM D4060
GM Daewoo DS-T-7415 - Lightfastness Test Method for Determining color fastness to artificial light
GM Daewoo EDS-T-7602 - Burning behaviour Test method for flammability of interior materials
GM Daewoo EDS-T-7603 - Odor test Test Method for odor of interior materials
GM/Opel GM 4486P - Ozone resistance Test for Ozone Resistance of Elastomer Compounds
GM/Opel GM 9070P - Flammability Procedure for testing flammability of materials
GM/Opel GM 9126P-A - Cleanability Test for Cleanability of Textiles and Plastics (Procedure A)
GM/Opel GM 9126P-B - Cleanability Test for Cleanability of Textiles and Plastics (Procedure B)
GM/Opel GM 9146P - Wicking Wicking of convertible top and roof trim materials
GM/Opel GM 9305P (Fogging F) - Determination of the fogging characteristics (Fogging F) Determination of Fogging Characteristics of Automotive Interior Trim Materials
GM/Opel GM 9505 P - Test Zyklus M - Dimensional stability cycle Automotive Environmental Cycles; Test cycle M - Dimensional stability cycle
GM/Opel GM 9507P - Thumbnail hardness test (scratch test) Thumbnail hardness test for painted parts
GM/Opel GM 9509P - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates
GM/Opel GM 9517P - Resistance to synthetic perspiration Resistance to synthetic perspiration
GM/Opel GM 9635P - Dust-Out Dust-out from Fiber sound absorber pad
GM/Opel GME 14074 - Sunscreen and insect repellent resistance Sunscreen and insect repellent resistance
GM/Opel GME 60248 - Scraping Scraping of Coatings on Elastomers and Textile Interior Materials
GM/Opel GME 60251 - Ozone resistance Determination of the ozone resistance of elastomers
GM/Opel GME 60253 - Resistance to fuels The resistance of elastomers to fuels
GM/Opel GME 60255 - Resistance to liquids and greases Resistance of elastomers to liquids and greases
GM/Opel GME 60258 - Accelerated ageing test Accelerated ageing test for elastomers
GM/Opel GME 60259 - Cold resistance Cold resistance of elastomers
GM/Opel GME 60268 - Stone impact resistance Determination of resistance to stone impact of surface coatings, plastics and self adhesive films
GM/Opel GME 60271 - Determination of the release of formaldehyde Determination of the release of formaldehyde from moulded parts for the vehicle interior
GM/Opel GME 60276 - Odour Test method for determining the resistance to odour propagation of trim materials
GM/Opel GME 60286 - Determining the air permeability Test method for determining the air permeability of trim materials
GM/Opel GME 60288 - Martindale abrasion test Abrasion test for textile fabrics - Martindale abrasion test
GM/Opel GME 60292-1 (BST 115°C) - Colour Fastness and Resistance to Artificial Light Determination of colour fastness and resistance to artificial light; Coding 1: 115°C
GM/Opel GME 60292-2 (BST 100°C) - Colour Fastness and Resistance to Artificial Light Determination of colour fastness and resistance to artificial light; Coding 2: 100°C
GM/Opel GME 60301 - Weight per unit area Test method for determining weight per unit area
GM/Opel GME 60302 - Determining "softness" of trim materials Test method for determining "softness" of trim materials
GM/Opel GME 60303-1 - Thickness Test method for determining thickness of trim materials; Coding 1: Calliper equipment
GM/Opel GME 60303-2 - Thickness Test method for determining thickness of trim materials; Coding 2: Force gauge equipment
GM/Opel GME 60304 - Resistance to Spotting Test method for determining resistance to "Spotting" of trim materials by water and saline solution
GM/Opel GME 60305 - Stretch and permanent set characteristics Test method for determining the stretch and permanent set characteristics of textiles and leathercloths
GM/Opel GME 60315 - Peel resistance Determination of the resistance to peeling of adhered body trim materials
GM/Opel GME 60317 - Determination of thread count and thread density Determination of thread count and thread density of woven fabrics
GM/Opel GME 60318 - Peel resistance Test method for determining the resistance to peel of self-adhesive tapes and films
GM/Opel GME 60321 - Determining the proportions of vegetable fibres an rubbers Test method for determining the proportions of vegetable fibers and rubber upholstery materials
GM/Opel GME 60323 - Determination of weave density Determination of weave density of knitted fabrics
GM/Opel GME 60325 - Tensile properties Test method for determining tensile properties of body trim, sealing materials, deadeners etc.
GM/Opel GME 60329 - Determination of the resistance to thread tear-out Test method for determining the resistance to thread tear-out of trim materials
GM/Opel GME 60330 - Colour fastness to rubbing Test method for determining colour fastness to rubbing of textiles and coated fabrics
GM/Opel GME 60331 - Pilling resistance Test method for determining "pilling" resistance of upholstery materials
GM/Opel GME 60334 - Tear strength Test method for determining the tear strength of textiles and coated fabrics (single tear method)
GM/Opel GME 60335 - Laminate adhesive strength Test method for determining the laminate adhesive strength of leathercloths and other laminated trim materials
GM/Opel GME 60341 - Seam strength Test method for determining the seam strength of upholstery trim materials
GM/Opel GME 60344 - Determination of the surface resistance Test method for evaluating the electrostatic properties of upholstery materials by surface resistance measurements
GM/Opel GME 60345 - Resistance to wear - rotary abrasion test (Schopper) Test method for the determination of the resistance to wear of automotive trim materials (Rotary abrasion test - Schopper)
GM/Opel GME 60349 - Determination of cohesive strength Test method foe determining the cohesive strength of felts and similar materials
GM/Opel GME 60351 - Determination of moisture content, water absorption and thickness swell Test Method for determining moisture content, water absorption and thickness swell of fibreboards, chipboards, cardboard etc.
GM/Opel GME 60368 - Abrasion resistance Determination of abrasion resistance of artificial leather
GM/Opel GME 60401 - Cross hatch test Cross hatch test of organic coatings
GM/Opel GME 60402 - Scratch resistance (Erichsen hardness tester, model 318) Determining the scratch resistance of organic coating (Erichsen hardness tester, model 318)
GM/Opel GME 60403 - Resistance to colour change by fuel oil soot Resistance of organic coatings to colour change by fuel oil soot
GM/Opel GME 6867 - Accelerated ageing Accelerated ageing test for polymer safety parts
GM/Opel GME 8701 - Evaluation of frictional properties Evaluation of frictional properties of body equipment materials
GM/Opel GMI 60246-A - Determination of the compressibility of a cellular elastomer under a specified force Determination of the compressibility of a cellular elastomer under a specified force; Pressure foot type: A
GM/Opel GMI 60254 (without rework) - Compatibility of different materials Determination of compatibility of different materials in contact
GM/Opel GMI 60266 - Resistance to cleaning agents Determination of resistance to cleaning agents of automotive trim components
GM/Opel GMI 60267-1-C - Impact resistance (Steelball, after accelerated ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 1: after accelerated ageing and cooling to 23°C
GM/Opel GMI 60267-2-C - Impact resistance (Steelball, test at 23°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 2: test at 23°C
GM/Opel GMI 60267-3-C - Impact resistance (Steelball, after 4 h storage at -30°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 3: after 4 h storage at -30°C and test immediately after removal
GM/Opel GMI 60272 - Compatibility of PVC-materials with Amine Compatibility of PVC-interior trim materials with amines
GM/Opel GMI 60275 - Resistance to synthetic perspiration solution Determination of Resistance to Synthetic Perspiration Solution of Automotive Trim Components
GM/Opel GMI 60283-1 - Determination of apparent density Procedures of test for cellular and related materials - Part 1: Determination of apparent density
GM/Opel GMI 60283-2 - Tensile properties Procedures of test for cellular and related materials - Part 2: Determination of tensile stress-strain properties
GM/Opel GMI 60283-4 - Determination of compression set Procedures of test for cellular and related materials - Part 4: Determination of compression set
GM/Opel GMI 60283-5 - Humidity ageing (steam autoclave) Procedures of test for cellular and related materials - Part 5: Determination of resistance to humidity ageing
GM/Opel GMI 60283-8 - Determination of compression load deflection (40 % compression) Procedures of test for cellular and related materials - Part 8: Determination of compression load deflection (40 % compression)
GM/Opel GMI 60306 - Determining the Low Temperature Resistance Test method for determining the low temperature resistance of automotive trim materials
GM/Opel GMI 60307 - Determination of the temperature stability Test method for determining the temperature stability of automotive trim materials
GM/Opel GMI 60314 - Weight per unit area Test procedure for determining the weight per unit area of the backing of PVC-coated upholstery materials
GM/Opel GMI 60333 - Residue on Ignition Test method for determining the residue on ignition (ash) of polymeric materials
GM/Opel GMN 10033 - Sunscreen lotion resistance Sunscreen lotion resistance of interior coatings
GM/Opel GMW 14069-A - Migration - Bleeding resistance Migration - Bleeding resistance and contact stain compatibility of PVC with other materials; Method A: Bleeding resistance
GM/Opel GMW 14069-B - Migration - Contact stain compatibility Migration - Bleeding resistance and contact stain compatibility of PVC with other materials; Method B: Contact stain compatibility
GM/Opel GMW 14093-1-C - Impact resistance (Steelball, after accelerated ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 1: after accelerated ageing and cooling to 23°C
GM/Opel GMW 14093-2-C - Impact resistance (Steelball, test at 23°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 2: test at 23°C
GM/Opel GMW 14093-3-C - Impact resistance (Steelball, after 4 h storage at -30°C) Determination of impact resistance of plastic components, Apparatus C (Steelball), Coding 3: after 4 h storage at -30°C and test immediately after removal
GM/Opel GMW 14093-C - Impact resistance (Steelball, after ageing) Determination of impact resistance of plastic components, Apparatus C (Steelball), ageing acc. to special requirements
GM/Opel GMW 14102 - Determination of Water Spotting Determination of water spotting test
GM/Opel GMW 14108 - Resistance to cracking from bending at cold temperature Resistance of materials to cracking from bending at cold temperature
GM/Opel GMW 14124 - Test cycle A - Moisture and cold cycle Automotive Environmental Cycles; Test cycle A: Moisture and cold cycle
GM/Opel GMW 14124 - Test cycle C - Exterior humidity thermal cycle Automotive Environmental Cycles; Test cycle C: Exterior humidity thermal cycle
GM/Opel GMW 14124 - Test cycle D - Interior humidity thermal cycle Automotive Environmental Cycles; Test cycle D: Interior humidity thermal cycle
GM/Opel GMW 14124 - Test cycle G - Environmental corrosion cycle Automotive Environmental Cycles; Test cycle G: Environmental corrosion cycle
GM/Opel GMW 14124 - Test cycle H - Dimensional Stability Test Cycle Automotive Environmental Cycles; Test cycle H: Dimensional stability test cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle M - Interior trim dimensional stability cycle Automotive Environmental Cycles; Test cycle M: Interior trim dimensional stability cycle
GM/Opel GMW 14124 - Test cycle P - Covered door panel delamination/dimensional stability cycle Automotive Environmental Cycles; Test cycle P: Covered door panel delamination/dimensional stability cycle
GM/Opel GMW 14124 - Test cycle P - Covered door panel delamination/dimensional stability cycle Automotive Environmental Cycles; Test cycle P: Covered door panel delamination/dimensional stability cycle
GM/Opel GMW 14124 - Test cycle Q - Aging condition for bond strength and hydrolytic stability of laminated textile materials Automotive Environmental Cycles; Test cycle Q: Ageing condition for bond strength and hydrolytic stability of laminated textile materials
GM/Opel GMW 14124 - Test cycle R - Shrinkage of upholstery materials used for wrapping instrument panels (IP) and rear window trim (RWT) Automotive Environmental Cycles; Test cycle R: Shrinkage of upholstery materials used for wrapping instrument panels (IP) and rear window trim (RWT)
GM/Opel GMW 14124 - Test cycle S - Accelerated aging of leather and plastic rolled goods Automotive Environmental Cycles; Test cycle S: Accelerated ageing of leather and plastic rolled goods
GM/Opel GMW 14124 - Test cycle T - Environmental simulation testing with autoclave Automotive Environmental Cycles; Test cycle T: Aging condition for bond strength and hydrolytic stability of laminated textiles materials (option to cycle Q)
GM/Opel GMW 14124 - Test cycle W - Interior adhesive/sealant humidity high temperature test cycle Automotive Environmental Cycles; Test cycle W: Interior adhesive/sealant humidity high temperature test cycle
GM/Opel GMW 14124 - Test Cylcle O - Paint Crack Cycle (humidity and heat cycle) Automobil Umweltzyklen; Test Zyklus O: Lackschichtbeständigkeit
GM/Opel GMW 14124 -Cycle W, revised acc. to GMW 14892 - Interior adhesive/sealant humidity high temperature test cycle Automotive Environmental Cycles; Test cycle W: Interior adhesive/sealant humidity high temperature test cycle / climate cycle revised according to GMW 14892, issue 2012-04 (Adhesion requirements for bonded interior parts)
GM/Opel GMW 14125 - Appendix B / Code A - Linear Abrasion Testing (with sraper) Linear Abrasion Testing - Test Scraper
GM/Opel GMW 14125 - Appendix C / Code B - Linear Abrasion Testing (with brush) Linear Abrasion Testing - Test Brush
GM/Opel GMW 14125 - Appendix E / Code D - Linear Abrasion (with sandpaper) Linear Abrasion testing appendix E Test wedge with sandpaper (short stroke length)
GM/Opel GMW 14125 - Appendix F / Code E - Linear abrasion ( with sandpaper) Linear abrasion test appendix E -Test wedge with sandpaper ( long stroke length)
GM/Opel GMW 14125 - Appendix H / Code H - Linear Abrasion Testing (with paper clip) Linear Abrasion Testing - Test wedge with paper clip (Appendix H)
GM/Opel GMW 14126 - Cold crack resistance Resistance to Cold Crack of Folded Materials
GM/Opel GMW 14127 - Impact Cold Crack Impact Cold Crack
GM/Opel GMW 14130 - Resistance to Marring or Scuffing Resistance to Marring or Scuffing
GM/Opel GMW 14131 - Compatibility with Amines Compatibility of Interior Trim Materials with Amines
GM/Opel GMW 14131 - Compatibility with Amines Compatibility of interior trim materials with amines
GM/Opel GMW 14132 - Resistance to Blocking Resistance to Blocking
GM/Opel GMW 14134 - Softness Softness (Leather)
GM/Opel GMW 14141 - Dye migration Dye Migration
GM/Opel GMW 14146 - Yarn Slippage Yarn Slippage
GM/Opel GMW 14148 - Resistance to Loop Pullout Resistance to Loop Pullout of Floor Carpet
GM/Opel GMW 14162-A - Colorfastness to Artificial Weathering; Method A Colorfastness to artificial weathering; Method A: Light and dark exposure cycle
GM/Opel GMW 14162-B - Colorfastness to Artificial Weathering; Method B Colorfastness to artificial weathering; Method B: Light only exposure cycle (100 °C BST)
GM/Opel GMW 14162-C - Colorfastness to Artificial Weathering; Method C Colorfastness to artificial weathering; Method C: Light only exposure cycle (115 °C BST)
GM/Opel GMW 14162-D - Colorfastness to Artificial Weathering; Method D Colorfastness to artificial weathering; Method D: Light and dark exposure cycle
GM/Opel GMW 14231-3.2.13 - Antimicrobial Odor GM/Opel, Antimicrobial Odor
GM/Opel GMW 14236 - Determination of the release of formaldehyde Determination of the release of formaldehyde from molded parts for the vehicle interior
GM/Opel GMW 14296 - Perspiration resistance Perspiration Resistance
GM/Opel GMW 14334 - Chemical resistance to fluids Chemical resistance to fluids
GM/Opel GMW 14334 - Chemical resistance to fluids Chemical resistance to fluids
GM/Opel GMW 14334 - Code C (artifical perspiration ) - Chemical Resistance to Fluids Chemical Resistance to Fluids; Code C: Artifical perspiration solutions
GM/Opel GMW 14334 - Code C (Artificial Perspiration S.) - Chemical Resistance to Fluids Chemical Resistance to Fluids; Code C: Artifical perspiration solutions
GM/Opel GMW 14444 § 3.3.7 - Compatibility / migration staining Material related interior part performance; § 3.3.7: Compatibility / Migration Staining
GM/Opel GMW 14445 - Sunscreen and Insect Repellent Resistance Sunscreen and insect repellent resistance
GM/Opel GMW 14458 - Copper-accelerated acetic acid salt spray test (CASS) Procedure for copper-accelerated acetic acid salt spray (CASS) test
GM/Opel GMW 14668 § 3.2.3.1 - Substrate surface stress test (only for ABS) Minimum performance requirements for decorative chromium plated plastic parts; § 3.2.3.1: Substrate surface stress test (only for ABS)
GM/Opel GMW 14668 § 3.2.3.2 - Substrate surface stress test (only for ABS+PC) Minimum performance requirements for decorative chromium plated plastic parts; § 3.2.3.2: Substrate surface stress test (only for ABS+PC)
GM/Opel GMW 14671 § 4.7.1 - Oil resistance Organic coating performance for underhood and underbody components; § 4.7.1: Oil resistance
GM/Opel GMW 14671 § 4.7.3 - Resistance to battery acid Organic coating performance for underhood and underbody components; § 4.7.3: Resistance to battery acid
GM/Opel GMW 14688-A - Scratch resistance Scratch and mar resistance; Method A: Scratch resistance
GM/Opel GMW 14695 - Cohesive strength Determining the cohesive strength of felts and similar materials
GM/Opel GMW 14698-A - Scratch resistance (Erichsen hardness test rod type 318) Scratch resistance of organic coatings and self-adhesive foils; Method A: Erichsen Hardness Test Rod type 318
GM/Opel GMW 14698-A - Scratch resistance (Erichsen hardness test rod type 318) Scratch resistance of organic coatings and self-adhesive foils; Method A: Erichsen Hardness Test Rod type 318
GM/Opel GMW 14698-B - Scratch resistance Scratch resistance of organic coatings and self-adhesive foils; Method B: Rockwood five arm test device
GM/Opel GMW 14698-B - Scratch resistance Scratch resistance of organic coatings and self-adhesive foils; Method B: five arm test device
GM/Opel GMW 14729-A - High Humidity Test (water fog) Procedures for high humidity test; Option A: Water Fog
GM/Opel GMW 14729-B - High Humidity Test (wet bottom) Procedures for high humidity test; Option B: Wet bottom
GM/Opel GMW 14775 - Resistance to Snagging Resistance to Snagging of textile Materials
GM/Opel GMW 14777 - Determination of moisture content Test method for determining moisture content, water absorption and thickness swell of fiberboards, chipboards, cardboard, and similar rigid materials
GM/Opel GMW 14829 - Crosshatch test Tape Adhesion Test for Paint Finishes (Crosshatch test)
GM/Opel GMW 14829-A - Adhesion test for paint (Crosshatch) Tape Adhesion Test for Paint Finishes; Method A: Crosshatch test
GM/Opel GMW 14829-B - Adhesion test for paint (X-cut test) Tape Adhesion Test for Paint Finishes; Method B: X-cut test
GM/Opel GMW 14864 - Staining due to Sulfur Dioxide (SO2) and Hydrogen Sulfide (H2S) Procedure to determining the staining of trim materials due to sulfur dioxide, SO2 and hydrogen sulfide, H2S
GM/Opel GMW 14864 - Staining due to Sulfur Dioxide (SO2) and Hydrogen Sulfide (H2S) Procedure to determining the staining of trim materials due to sulfur dioxide, SO2 and hydrogen sulfide, H2S
GM/Opel GMW 14867 § 3.3 - Cure Test Performance requirements of paints on interior plastic substrates; § 3.3: Cure test
GM/Opel GMW 14867 § 3.6 - Effects of cleaners and lotions Performance requirements of paints on interior plastic substrates; § 3.6: Effects of cleaners and lotions
GM/Opel GMW 14872 - Corrosion cycle test Cyclic Corrosion Laboratory Test
GM/Opel GMW 14872 - Cyclic corrosion laboratory test Cyclic corrosion laboratory test
GM/Opel GMW 14872 - Cyclic corrosion laboratory test Cyclic corrosion laboratory test
GM/Opel GMW 14885 § 4.4.13.2 - Accelerated Weathering Painted aluminium road wheels - Paint performance requirements; § 4.4.13.2: Accelerated weathering (Xenon-Arc-Test)
GM/Opel GMW 15377 - Staining and cleaning Staining and cleaning of leather and plastic roll goods
GM/Opel GMW 15432-A - Heat storage with infrared radiation Irradiation test; Code A: 3 cycles in radiation chamber (mit IR heaters)
GM/Opel GMW 15432-B - Irradiation Testing Irradiation test; Code B: 1 cycle in radiation chamber
GM/Opel GMW 15600 - Determination of aldehyde and ketone emissions Determination of Aldehyde and Ketone Emissions in Vehicle Interior Cabin Air
GM/Opel GMW 15634 - Determination of volatile and moderately volatile organic components Determination of volatile and semi-volatile organic compounds in materials of automotive interior
GM/Opel GMW 15634 - Evaluation acc. to GMW 3059 - Determination of volatile and moderately volatile organic components Determination of volatile and semi-volatile organic compounds in materials of automotive interior
GM/Opel GMW 15635 - Determination of aldehyde and ketone emissions Determination of Aldehyde and Ketone Emissions from Interior Materials
GM/Opel GMW 15651 - Hook Fastener Resistance Hook Fastener Resistance (Martindale method)
GM/Opel GMW 15793 - Ice Scraper damage test Window seals and moldings - Ice scraper damage test
GM/Opel GMW 15891 - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates, media resistance
GM/Opel GMW 15891 - Resistance agaist solvent (determining cure of painted substrates) Solvent rub method for determining cure of painted metal or plastic substrates, media resistance
GM/Opel GMW 16526 - Water absorption Water absorption
GM/Opel GMW 3010 - Tensile properties Determination of Tensile and Elongation Properties
GM/Opel GMW 3010, Code C - Tensile properties for threads Tensile properties for threads
GM/Opel GMW 3016 - Organic Volatiles in Sealers and Adhesives Test for organic volatiles in sealers and adhesives
GM/Opel GMW 3154 - Mandrel bend test Mandrel Bend Test
GM/Opel GMW 3182 - Determination of Mass per Area Determination of Mass per Area
GM/Opel GMW 3205-A (70°C, with water) - Odor (Variant A) Determining the resistance to odor propagation of interior materials, Coding A: wet condition, 70°C
GM/Opel GMW 3205-A (70°C, with water) - Odour (Variant A) Determining the resistance to odor propagation of interior materials; Coding A: wet condition, 70 °C
GM/Opel GMW 3205-B (70°C, without water) - Odor (Variant B) Determining the resistance to odor propagation of interior materials, Coding B: Dry condition, 70 °C
GM/Opel GMW 3205-B (70°C, without water) - Odour (Variant B) Determining the resistance to odor propagation of interior materials; Coding B: Dry condition, 70 °C
GM/Opel GMW 3205-C (105°C, without water) - Odor (Variant C) Determining the resistance to odor propagation of interior materials, Coding C: DRY high temperature condition, 105 °C
GM/Opel GMW 3205-C (105°C, without water) - Odour (Variant C) Determining the resistance to odor propagation of interior materials; Coding C: Dry, high temperature condition, 105 °C
GM/Opel GMW 3208 - Rotary Abrasion Test, Taber Type Rotary Abrasion Test, Taber Type
GM/Opel GMW 3211 - Determination of static and permanent elongation Resistance to stretch and set
GM/Opel GMW 3217 - Ravel Resistance Ravel Resistance
GM/Opel GMW 3220 - Laminate Bond Strength Laminate Bond Strength
GM/Opel GMW 3221 (Code A) - Standard Conditioning Procedure for Standard Conditioning of Organic Materials; Code A: (22 ± 3) °C und (50 ± 5) % RH
GM/Opel GMW 3221 (Code B) - Standard Conditioning Standard Conditioning of Organic Materals - Code B
GM/Opel GMW 3232 - after ageing - Burning behaviour Test method for determining the flammability of interior trim materials (after ageing)
GM/Opel GMW 3232 - received condition - Burning behaviour Test method for Determining the Flammability of Interior Trim Materials (as received)
GM/Opel GMW 3235-A - Fogging Characteristics of Trim Materials (Photometric Method) Fogging characteristics of trim materials; Method A: Photometric method (Fogging F)
GM/Opel GMW 3235-B - Fogging Characteristics of Trim Materials (Gravimetric Method) Fogging Characteristics of Trim Materials, Method B: Gravimetric Method (Fogging G)
GM/Opel GMW 3259 - Mildew resistance Mildew resistance
GM/Opel GMW 3274 - Pile distortion - Mechanical Pile distortion - Mechanical (abrasion)
GM/Opel GMW 3283 - Schopper abrasion wear test Schopper abrasion wear test
GM/Opel GMW 3286 - Neutral salt spray test (NSS test) Procedure for neutral salt spray test (NSS)
GM/Opel GMW 3326 - Tearing strength - Trapezoid Method Tearing strength of textile materials by trapezoid method
GM/Opel GMW 3347 - Lint pickup and retention Lint pickup and retention of textile materials
GM/Opel GMW 3387 - Determining fiber degradation Procedure for determining fiber degradation of automotive textiles (after exposure)
GM/Opel GMW 3402-A - Soil resistance Soil and cleaner resistance of automotive materials; Procedure A: Soil resistance
GM/Opel GMW 3402-B - Cleaner Resistance Soil and cleaner resistance of automotive materials; Procedure B: Cleaner resistance
GM/Opel GMW 3405 - Seam Fatigue Seam Fatigue for Automobile Textiles
GM/Opel GMW 4089 - Determination of laminate curl properties Procedure for determining laminate curl properties of foam laminated materials
GM/Opel GMW 4090 - Determination of weave and yarn count Determination of weave and yarn count
GM/Opel GMW 4141 - Pile distortion - Environmental Pile distortion - Environmental (heat and humidity)
GM/Opel GMW 4217 - Dimensional Stability Dimensional Stability
GM/Opel GMW 4217, dry - Dimensional Stability Dimensional Stability (dry)
GM/Opel GMW 4217, wet - Dimensional Stability Dimensional Stability (wet)
GM/Opel GMW 4726 - Water repellent properties (Spray test) Water repellent properties of automotive textiles
GM/Opel GMW 4749 - Pilling Characteristics Procedure for determining pilling characteristics of automobile textile materials
GM/Opel GMW 4750 - Color Read-Through Color read-through of automotive fabrics
GM/Opel GMW 6992 - Visual evaluation Visual appearance assessment
GMW 14357 (Humidity ageing / Autoclave > 100 °C) - Resistance to Humidity ageing Procedures of test for cellular and related materials - Determination of resistance to humidity ageing
GMW 14357 (Humidity ageing / in glass vessel < 100 °C) - Resistance to Humidity ageing For cellular and related materials: Determination of Resistance to Humidity ageing
GMW 14363 - Identation Hardness Determination of Indentation Hardness of Foam Components at Constant Force
GMW 14701 Method 2 - Resistance of coatings to chemical (drop test at room temperature) Resistance of coatings to chemical etching and distortion - Method 2 (Room Temperature Test)
GMW 14701 Method 3 - Resistance of coatings to chemical (drop test at elevated temperature) Resistance of coatings to chemical etching and distortion - Method 3 (Elevated Temperature Test)
GMW 14701 Method 4 - Resistance of coatings to chemical (drop test at climate storage) Resistance of coatings to chemical etching and distortion - Method 4 (Fuel Oil Soot Test)
GMW 14892 § 3.1.5.1 (peel adhesion) - Peel adhesion Adhesion requirements for bonded interior parts - peel adhesion
GMW 14892 § 3.1.5.2 (visual) - Adhesion, visual evaluation Adhesion requirements for bonded interior parts - Adhesion, visual evaluation
GMW 14892 § 3.4 (peel strength) - Adhesion Adhesion requirements for bonded interior parts - peel strength
GMW 14892 § 3.5 (visual) - Adhesion, visual evaluation Adhesion requirements for bonded interior parts - Adhesion, visual evaluation
GMW 16449 Method A - Fluid Compatibility Electrical component fluid compatibility - Method A - Normal cleaning
GMW 16449 Method B - Fluid Compatibility Electrical component fluid compatibility - Method B - Brush cleaning
GMW 16830 - Tape lamination Tape lamination to automotive components
GMW 17408 Table A1 - Cycle test - Exterior Flexible Expanded Rubber and Rubber-like Materials for Air, Dust, Noise, and Water Sealing: table A1: Cycle test - Exterior
GMW 17408 Table A3 - Cycle test - Exterior Flexible Expanded Rubber and Rubber-like Materials for Air, Dust, Noise, and Water Sealing: Table A3: Cycle test - Exterior
Grab tensile test General method
Gulf Standard GS 98/1988 - Burning behaviour Motor vehicles flammability of interior materials and their testing methods
GWT A E01-02 - Fogging characteristics (gravimetric) Test methods amd limits of fogging characteristics of trim materials in motor vehicles
Haptics behaviour / touch test Haptics behaviour / touch test (e.g. DBL 7384 § 4.10)
Hardness/Grip test for padded materials General grip indentation measurement for padded materials
Heat retentivity Heat retentivity
Heat storage Heat storage
Heat storage with infrared irradiation Heat storage with infared irridiation
Heavy metals in acidic sweat extract (DIN EN ISO 105-E04) Heavy metals in acidic sweat extract
HES D 6501-06 § 3.5 - Pencil Scratch Hardness Test General test methods for coating § 3.5 Pencil Scratch Hardness Test
high precision snagging mace Equipment for Mace Snag device acc to VDA 230-220
HJ/T measurement cycle according HJ-T 400 - Determination of organic emissions organic emissions from vehicle interior measurements
Hole density
Honda - Cleanability Honda - Cleanability (e.g. Honda 8102Z-SLE-J000)
Honda 0096Z-TLA-A000 § 4.3 - Pencil Scratch Hardness Test The quality standard of coating on PP resin parts - Specification for ext parts - § 4.3 Film hardness
Honda 7060Z-TW1W-H000 § 4.7.1 - static deformation Sunshade Assy, Roll - Creep resistance - static deformation
Honda 7710Z § 6-19 - Odor test Specification for Inst Parts (General), § 6-19 Oder characeristics
Honda 7754Z-TZ5A-A000 § 6-21 - Odor test (Room temperatur) Wood Panel with open pore Finish Spezification for TZ5 - § 6.21 Odor
Honda 7754Z-TZ5A-A000 § 6.21 - Odor test (at 80 °C) Wood Panel with open pore Finish § 6.21
Honda 8320Z-SDA-0000 § 6.14 - Odor test Specification for Roof parts § 6.14 Odor
Honda 8350Z § 6-22 - Odor test Door/Side Lining General Specification, § 6-22 Odor test
Honda 8350Z § 6.21 - Odor test Door/Side Specification for General; § 6.21: Odor test
Honda 8373Z-TK8-A011-M1 § 6.13 - Odor Characteristics Sunshade assy specification; § 6.13: Odor Characteristics
Honda 8440Z-T43A-J010-M1 § 15-13 - Odor test Tonneau Cover Assy - Specification for T43A, § 15-13 Odor
Honda 8460Z-TX6-0000 § 7-20 - Odor test Test method specification for Assy trunk interior parts; § 7-20: Odor test
Honda D 6507 § 4.13.1 - Light resistance with ultraviolet carbon-arc lamp General test methods for floor carpet; § 4.13.1: Light resistance with ultraviolet carbon-arc lamp
Honda D 6507 § 4.16.1 - Odor Properties (room temperature) General test methods for floor carpet; § 4.16.1: Odor properties - normal condition
Honda D 6507 § 4.16.2 - Odor Properties (at 80 °C) General test methods for floor carpet; § 4.16.2: Odor properties - at 80 °C
Honda DWG No. 0094Z-SNA-0000 - Determination of the VOC emission Specification for test method for VOC
Honda DWG No. 0094Z-T0A-0000 - VOC Test method VOC Test methods specification for interior parts
Honda DWG No. 0094Z-T7S-0000 - VOC Test Method VOC Test Method Specification for interior parts
Honda HES D 6003 - Flammability Flammability test method for automobile interior materials
Honda HES D 6501-06 § 3.12 - Anti-Tackiness Test General test methods for coating; § 3.12: Anti-Tackiness Test
Honda HES D 6501-06 § 3.3 - Gloss General test methods for coating; § 3.3: Gloss
Honda HES D 6501-06 § 3.6 - Adhesion Test (cross cut test) General test methods for coating § 3.6 Adhesion Test (cross cut test)
Honda HES D 6508 (Method B - specular gloss) - Determination of fogging characteristics (Fogging F) Test method for fogging of interior materials for automobiles; Methode B: Method for measuring specular gloss (Fogging-F)
Honda HES D 6601-99A - Light resistance Accelerated test method for light resistance with xenon-arc lamp
Honda SMG 5460Z-SEA-0000 § 7.24 - Odor test Specification for assy trunk interior parts; §7.24: Odor strength
House method: Phenol & derivatives with GC/MSD House method: phenols and derivatives by GC / MSD
Hyundai / KIA - abrasion resistance, plane surfaces allg. Abriebfestigkeit für Hyundai-Prüfpläne
Hyundai MS 343-11 § 4.14 - Crease Resistance Material specification - Crease Resistance
Hyundai/KIA KS M 6518 § 5 - Tensile test Physical test method for vulcanized rubber; § 5: Tensile test
Hyundai/KIA MS 200-08 - Migration staining Resistance of coated fabrics and plastic film to deterioration and migration staining
Hyundai/KIA MS 200-11 - Resistance to soil impregnation Soiling test for artificial leather and plastic sheet
Hyundai/KIA MS 200-34 § 4.10 - Repeated Compression Standard Test Method of Pad for Seat, § 4.10 Repeated Compression Pounding Test
Hyundai/KIA MS 200-34 § 4.7 - Stress relaxation test Standard Test Method of Pad for Seat, § 4.7 Compression Stress Relaxation Test
Hyundai/KIA MS 200-34 § 4.8 - Vibration test Standard Test Method of Pad for Seat, § 4.8 Vibrational Characteristic Test
Hyundai/KIA MS 200-38 § 4.3 - Heat cycle test with infrared irradiation Test Standard - Steering Wheel § 4.3 Heat Cycle Resistance Test
Hyundai/KIA MS 201-02 § 3.1.1/ DIN EN 62321 - Determination of heavy metals Prohibition and reporting the use of harmful substances - parts and metals - § 3.1.1: prohibition of the use of 4 heavy metals
Hyundai/KIA MS 201-02 § 3.3 / DIN EN 62321 - Determination of PBDE (polybrominated diphenyl ethers) in polymers with GC-MS Prohibition and reporting the use of harmful substances - parts and metals - § 3.3: prohibition the Brominated flame retardent restriccted PBDE (Poly Brominated Diphenyl Ethers) in USA
Hyundai/KIA MS 210-05 § 4.3.1 - Heat cycle resistance test with infrared irradiation Molded plastic parts - Interior; § 4.3.1: Heat cycle resistance test
Hyundai/KIA MS 210-05 § 4.5 - Fading resistance test Molded plastic parts - Interior; § 4.5: Fading resistance test (Method: Xenon Arc - equipment according to ISO 105)
Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Interior use; § 4.7: Chemical resistance test
Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Interior; § 4.7: Chemical resistance test
Hyundai/KIA MS 210-05 § 4.8 - Wear resistance Molded plastic parts - Interior use; § 4.8: Wear resistance
Hyundai/KIA MS 210-05 § 4.9 - Scratch resistance Molded plastic parts - Interior use; § 4.9: Scratch resistance test
Hyundai/KIA MS 210-06 § 4.4.2 - Weatherability test Molded plastic parts - Exterior use § 4.4.2 Artificial Weatherability test
Hyundai/KIA MS 256-31 § 5.2 - Peel strength Dash isolation pad assy; § 5.2: Peel strength
Hyundai/KIA MS 300-08 - Flammability resistance Flammability resistance - Interior materials
Hyundai/KIA MS 300-11 - Resistance to scuffing Method of testing resistance to scuffing of materials such as vinyl, genuine leather and luggage compartment mats
Hyundai/KIA MS 300-31 § 4.12.1/.2 - Fade resistance test Standard Test Methods - Leather, A/Leather and Sheet § 4.12.1 + 4.12.2: Fastness Test
Hyundai/KIA MS 300-31 § 4.13 - Tackiness Standard Test Methods - Leather, A/Leather and Sheet § 4.13: Tackiness Free
Hyundai/KIA MS 300-31 § 4.19 - Abrasion resistance (Taber Abraser) Standard Test Methods - Leather, A/Leather and Sheet § 4.19: Abrasion Resistance
Hyundai/KIA MS 300-31 § 4.27 - Determination of the seam strength Standard Test Methods - Leather, A/Leather and Sheet § 4.27 Seam Strength
Hyundai/KIA MS 300-31 § 4.3 - Thickness Standard Test Methods - Leather, A/Leather and Sheet § 4.3: Thickness
Hyundai/KIA MS 300-32 § 4.14.1 - Fade Fastness Standard Test Method - Woven, Knit
Hyundai/KIA MS 300-32 § 4.9.1 - Seam strength
Hyundai/KIA MS 300-34 - Odor test Test method of odor for interior materials
Hyundai/KIA MS 300-34 - Odor test Test method of odor for interior materials
Hyundai/KIA MS 300-51 - Determination of grease content and pH value Test Methods Grease Content and pH for Genuine Leather
Hyundai/KIA MS 300-54 - Fogging (light transmittance) Standard Test Method - Fogging
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds Test method for the determination of the emission of VOCs from vehicle part
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC) Test method for the determination of the emissions of VOCs from vehicle interior parts
Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC) Test method for the determination of the emissions of VOCs from vehicle interior parts
Hyundai/KIA MS 300-55 § 4.2 - Determination of Formaldehyde Test method for volatile organic compounds release; §4.2: Measurement of formaldehyde
Hyundai/KIA MS 300-55 § 4.4.2 - Organic substances and their emissions with TDS-GC-MSD Determination of volatile organic compounds from vehicle interior parts; §4.4.1: Determination of VOC and aldehydes from part using thermal desorption analysis method
Hyundai/KIA MS 300-57 - Determination of VOC emission in a 1 m³ testing chamber Test method for VOCs emission from part assembly
Hyundai/KIA MS 322-05 § 3.5 - Tear strength Natural Leather - Laminated Soft Trim; Tear Strength
Hyundai/KIA MS 322-05 § 3.6 - Peeling strength Natural Leather - Laminated Soft Trim; Peeling strength
Hyundai/KIA MS 322-05 § 4.13.1 - Chemical Resistance - AbrasionTest Genuine Leather - Interior Trim; Chemical Resistance - AbrasionTest
Hyundai/KIA MS 322-05 § 4.13.2 - Chemical resistance - Drop test Genuine Leather - Interior Trim; Chemical resistance - Drop test
Hyundai/KIA MS 322-05 § 4.14 - Sunscreen lotion resistance Genuine Leather - Interior Trim; Sunscreen lotion resistance
Hyundai/KIA MS 322-05 § 4.15 - Resistance to water Genuine Leather - Interior Trim; Resistance to water
Hyundai/KIA MS 322-05 § 4.5 - Tear strength Genuine Leather - Interior Trim; Tear Strength
Hyundai/KIA MS 322-05 § 4.6 - Peeling strength Genuine Leather - Interior Trim; Peeling Strength
Hyundai/KIA MS 600-35 § 6.20 (SAE J2527) - Light fastness (Exterior) Testing Methods for Coatings and Coating Films
Hyundai/KIA MS 652-12 § 5.4 - Scratch resistance test Soft feel painting - Interior plastic parts; § 5.4: Scratch resistance test
Hyundai/KIA MS 652-14 § 5.23.1 - Abrasion resistance, Flat surface Painting - Hard thermoplastic parts; § 5.23.1: Abrasion resistance, flat surface
Hyundai/KIA MS 655-08 § 4.21.1 - Abraision resistance for flat surfaces Paint - hard thermoplastic parts; § 4.21.1: Abraision resistance for flat surfaces
Hyundai/KIA Softening point - Determination of the softening point of laminates e.g. Hyundai/KIA MS 320-11 § 4.14, Hyundai/KIA MS 300-32 § 4.23.2
i.A. DIN 38409-H23-2 BIAS, German standard methods for the examination of water, waste water and sludge- Parameters characteriing effects ans substances ( group H ) Part 23, Determination of bismut active substances ;DRAGENDORFF-REAGENZ (BiAS)
i.A. DIN EN 1122 - Determination of cadmium Kunststoffe - Bestimmung von Cadmium - Nassaufschlussverfahren
i.a. DIN EN 12766 (ECD) polybromine biphenyle/ biphenylaether (PBB/PBDE)
i.A. DIN EN ISO 17353 - F13 (mod. for solids ) - Determination of organic stannous compounds Water quality - Determination of selected organotin compounds - Gas chromatographic method (F13)
IEC 62321-3-1 - Determination of the elements by X-ray fluorescence analysis Determination of certain substances in electrotechnical products – Part 3-1: Screening – Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
IEC 62321-4 - Determination of mercury in polymers, metals and electronics Determination of certain substances in electrotechnical products – Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
IEC 62321-5 - Determination of the total content of selected elements by atomic emission spectrometry (ICP-OES) Determination of certain substances in electrotechnical products – Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
IEC 62321-6 - Determination of PBB and PBDE in polymers with GC-MS Determination of certain substances in electrotechnical products – Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography–mass spectrometry (GC-MS)
IEC 62321-7-2 - Determination of chromium(VI) Determination of certain substances in electrotechnical products – Part 7-2: Hexavalent chromium – Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method
Indian Standard IS 15061, Annex A - Burning behaviour - Determination of horizontal burning rate Automotive Vehicles - Flammability requirements - Annex A: Test to determine the horizontal burning rate of materials
Infrared microscopy (IR) Infrared microscopy (IR)
Infrared spectrometry (IR / FTIR) Infrared spectroscopy without data interpretation
IR drying IR drying
ISO 105-G02 (Specified number of cycles / storage period) - Colour fastness to burnt gas fumes ISO 105-G02 - Textiles - Tests for colour fastness - Part G02: Colour fastness to burnt-gas fumes
ISO 10993-5 - Cytotoxicity test Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity
ISO 11359-2 - Thermomechanical analysis (TMA) Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 12219-1 - Determination of organic emissions Interior air of road vehicles - Part1 : Whole vehicle test chamber - specifications and method for the determination of volatile organic compounds in cabin interiors
ISO 12219-2 - Determination of volatile organic compounds Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method
ISO 12219-3 - Determination of the emissions of volatile organic compounds. Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method
ISO 12219-3 N-Nitrosamines - Determination of the emissions of volatile organic compounds (N-Nitrosamines-Emission) Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method
ISO 12219-3, in accordance - Determination of volatile organic compounds (VOC and carbonyl emissions) Interior air of road vehicles - Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method
ISO 12219-4 (Daimler) - Determination of volatile organic compounds Interior air of road vehicles - Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
ISO 12219-4 (Porsche) - Determination of volatile organic compounds Interior air of road vehicles - Part 4: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
ISO 12219-4 - Determination of volatile organic compounds Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method
ISO 12219-9 - Determination of the emissions Interior air of road vehicles - Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts - Large bag method
ISO 1407 - Determination of solvent-extractable material Rubber - Determination of solvent extract
ISO 1431-1 (procedure A) - Ozone resistance Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 1431-1-A - Ozone resistance Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
ISO 15512-B - Determination of water content with Karl Fischer titration Plastics - Determination of water content; Method B: Water vaporization
ISO 15797 - Industrial washing and finishing procedures Textiles - Industrial washing and finishing procedures for testing of workwear
ISO 1628-4 - Determination of viscosity number Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials
ISO 1628-5 - Determination of viscosity number Plastics - Determination of viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP), homopolymers und copolymers
ISO 16549 - yarn unevenness test Textiles - Unevenness of textile strands - Capacitance method
ISO 16750-4 § 5.4.3 - Ice water shock test, submersion test Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
ISO 16750-4 § 5.6.2.4, Test 3 - Humid heat cyclic test, dewing test Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
ISO 16750-5 - Chemical loads Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
ISO 17202 - Untwist/retwist method Textiles - Determination of twist in single spun yarns - Untwist / retwist method
ISO 1763 - Determination of numbers of tufts and / or loops Carpets - Determination of number of tufts and/ or loops per unit length and per unit area
ISO 1765 - Determination of thickness Machine-made textile floor coverings - Determination of thickness
ISO 1766 - Determination of thickness of pile above the substrate Textile floor coverings - Determination of thickness of pile above the substrate
ISO 188 - Heat ageing Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 188 - Heat ageing Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 1926 - Tensile properties Rigid cellular plastics - Determination of tensile properties
ISO 20433 - Colour fastness to crocking Leather - Tests for colour fastness - Colour fastness to crocking
ISO 20653 IPX8 - Resistance to liquids - Water immersion method Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
ISO 2135 - Accelerated test of light fastness Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
ISO 22241-2 - NOx reduction agent AUS 32 Diesel engines - NOx reduction agent AUS 32 - Part2 : Test methods
ISO 2420 - Determination of apparent density Leather - Physical and mechanical tests - Determination of apparent density
ISO 247 method A - Determination of ash Rubber - Determination of ash
ISO 247 method B - Determination of ash Rubber - Determination of ash
ISO 2549 - Determination of tuft leg length Hand-knotted carpets - determination of tuft leg length above the woven ground
ISO 2781-A - Determination of Density Rubber, vulcanized or thermoplastic - Determination of density (Method A - immersion method)
ISO 2796 - Dimensional Stability Cellular plastics, rigid - Test for dimensional stability
ISO 2808 - Method 5A - Microscopic examination of cross-section Paints and varnishes - Determination of film thickness; § 10.2: Microscopic examination of cross-section (Method 5A)
ISO 34-1-B - Tear strength (angle test piece) Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (here method B: angle test pieces)
ISO 37 (Examination in temperature chamber - heat) - Tensile properties Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 37 - Tensile properties Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 3795 - Burning behaviour Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 3801 / ISO 6348 - Determination of mass per unit length and mass per unit area Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area
ISO 3865-A1 Test in heat - Contact and migration staining Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material; Method A: contact and migration staining
ISO 4919 (based on) - Tuft withdrawal force Carpets - Determination of tuft withdrawal force
ISO 527-2 - Tensile properties Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 554 - Standard atmosphere for conditioning Standard atmospheres for conditioning and / or testing - Specifications
ISO 5659-2 - smoke generation Plastics -Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO 6209 - Determination of solvent-extractable material Rubber compounding ingredients - Carbon black - Determination of solvent-extractable material
ISO 6452 (Fogging F) - Determination of the fogging characteristics (Fogging F) Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles (Fogging F, reflectometric)
ISO 6452 (Fogging G) - Determination of the fogging characteristics (Fogging G) Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles (Fogging G, gravimetric)
ISO 7619-1 (Shore A) - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method ( Shore hardness A)
ISO 7619-1 (Shore A) / testing in cold - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in cold
ISO 7619-1 (Shore A) / testing in heat - Determination of Shore A hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) / testing in heat
ISO 7619-1 (Shore D) - Determination of Shore D hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method ( Shore hardness D)
ISO 7724-2 - Colour measurement Paints and varnishes - Colorimetry - Part 2: Colour measurement
ISO 7765-2 - Impact resistance by the free-falling dart method - Instrumented puncture test Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test
ISO 7784-1 - Determination of resistance to abrasion (Rotating abrasive-paper-covered wheel method) Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method
ISO 812-A - Brittleness temperature (Procedure A) Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness; Procedure A (determination of brittleness temperature)
ISO 812-B - 50 % brittleness temperature Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness, Procedure B (determination of 50 % brittleness temperature)
ISO 8301 (DIN EN 12667) - Determination of steady-state thermal resistance Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
ISO 844 - Determination of compression properties Rigid cellular plastics - Determination of compression properties
ISO 8543 - Determination of mass Textile floor coverings - Methods for determination of mass
ISO 9053 - Acoustics, airflow resistance Acoustics - Materials for acoustical applications - Determination of airflow resistance
ISO 9867 - Wrinkle recovery Textiles - Evaluation of the wrinkle recovery of fabrics - Appearance method
ISO/IEC 28360 / ECMA 328 - Emission rates Information technology - office equipment - Determination of chemical emission rates from electronic equipment
ISO/TC 45/SC 4 (Fogging F) - Determination of the fogging characteristics (Fogging F) Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles (Fogging F, reflectometric)
ISO/TC 45/SC 4 (Fogging G) - Determination of the fogging characteristics (Fogging G) Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles (Fogging G, gravimetric)
ISUZU SIC-F00-001 - Determination of the VOC emission The VOC concentration measuring method emitted from car parts
Iveco 15-0470 - Resistance to water Determining resistance to water of paints, enamels
Iveco 15-0473 - Resistance to solvents Determination of resistance of paints, enamels etc to solvents
Iveco 15-6023 - Stone impact Resistance of coatings, paints, protective treatments etc. to stone impact
Iveco 16-0140 - Damp heat Permanent damp heat test
Iveco 16-0146 - Temperature cycling Rapid temperature change test for components and assemblies
Iveco 16-0180 (xenon arc exposure) - Light resistance (method B) Accelerated ageing by atmopsheric agents, method B
Jaguar JNS 30.32.04 - Resistance to heat ageing Resistance to heat ageing - General
Jaguar JNS 30.60.08-A - Susceptibility to amine staining (Method A) Determination of susceptibility to Amine Staining, Method A (imitation leather )
Jaguar JNS 30.60.08-B - Susceptibility to amine staining (Method B) Determination of susceptibility to Amine Staining, Method B (foam)
Jaguar JNS 30.60.08-C - Susceptibility to amine staining (Method C) Determination of susceptibility to Amine Staining, Method C (foam and imitation leather combination )
Jaguar TPJLR 00.230 - Stick - Slip test Squeak and rattle prevention: Contact point and material pair compatibility analysis
Jaguar TPJLR 18.001 § I 7.7 - Fluid resistance test Wiring Harness Grommets - § I 7.7 Fluid resistance test
Jaguar TPJLR 52.008 - Scratch Resistance Assessment of Scratch Performance - Crosshatch Method
Jaguar TPJLR 52.060 - Adhesion test Determination of adhesion of flock coating
Jaguar TPJLR 52.095 - Determination of VOC Emissions Determination of VOC Emissions - Small Bag Method
Jaguar TPJLR 52.252 - Salt spray test Resistance To Neutral Salt Spray Corrosion Testing
Jaguar TPJLR 52.253 Method 1 - Salt spray test Jaguar Cars & Land Rover: Test cycle for resistance to humidity and salt spray
Jaguar TPJLR 52.265 - Accelerated corrosion test, (cyclic atmospheric corrosion test with salt load) Laboratory accelerated cyclic corrosion test
Jaguar TPJLR 52.360 - Climate cycle test Accelerated Environmental Ageing for Adhesives Used in Trim Applications
Jaguar TPJLR 52.457 - Resistance to fibre show through of perforated leather Resistance to fibre show through of perforated leather
Jaguar TPJLR 52.458 (VDA 270 Variant 2) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.458 (VDA 270 Variant 3) - Odour Determination and assessment of odour from interior trim materials/components/assemblies
Jaguar TPJLR 52.459 - Electrical Resistance Determination of the electrical resistance of Textile Fabrics
Jaguar TPJLR 52.554 - Corrosion Test Prohesion Corrosion Test
Jaguar TPJLR 52.564 - Water immersion test Water Immersion Test For Painted Parts And Panels
Jaguar TPJLR 52.655 - Hydrolysis resistance Hydrolysis of Polyurethane Laminated Foam
Jaguar TPJLR.52.001 - Abrasion Resistance Jaguar Cars & Land Rover: Abrasion Resistance of Textile Fabrics
Jaguar TPJLR.52.004 - Resistance to Scratch Jaguar Cars & Land Rover: Resistance to scratch
Jaguar TPJLR.52.010 - Mar resistance (Erichsen 430-PI Assessment of mar performance - gloss assessment method
Jaguar TPJLR.52.056 - Foam adhesion to Flexible & Rigid Substrates (Scraper Method) Jaguar Cars & Land Rover: Determination of foam adhesion to flexible & rigid substrates (Scraper Method)
Jaguar TPJLR.52.058 (180° method) - 180° peel method Jaguar Cars & Land Rover: Adhesive Bond Strength - 180 Degree Peel Method
Jaguar TPJLR.52.061 - Paint Adhesion Jaguar Cars & Land Rover: Paint adhesion test method
Jaguar TPJLR.52.104 - Determination of VOC Emissions from Interior Trim Materials Jaguar Cars & Land Rover: Determination of VOC Emissions from Interior Trim Materials
Jaguar TPJLR.52.104 - Determination of volatile organic compounds (VOC emissions) Determination of VOC (and Carbonyl) Emissions for Interior Trim Materials
Jaguar TPJLR.52.107 - Determination of VOC's from interior components Jaguar Cars & Land Rover: Determination of VOC's from interior components and systems using a 1 m³ emission chamber
Jaguar TPJLR.52.154 - Resistance to fuel Jaguar Cars & Land Rover: Determination of plastic component resistance to fuel
Jaguar TPJLR.52.155 - Fluid Spotting Jaguar Cars & Land Rover: Fluid spotting of automotive trim
Jaguar TPJLR.52.156 - Resistance to Perspiration Jaguar Cars & Land Rover: Resistance of interior trim to perspiration - Immersion test
Jaguar TPJLR.52.156 - Resistance to Perspiration Jaguar Cars & Land Rover: Resistance of interior trim to perspiration - Immersion test
Jaguar TPJLR.52.160 - Resistance to Exterior Transit Protection Materials Jaguar Cars & Land Rover: Resistance to exterior transit protection materials
Jaguar TPJLR.52.201 - Soiling and Cleanability Jaguar Cars & Land Rover: Soiling and Cleanability of Trim Materials
Jaguar TPJLR.52.202 - Soiling and cleanability Jaguar Cars & Land Rover: Susceptibility of trim material to dye ingress
Jaguar TPJLR.52.202 - Soiling and cleanability Jaguar Cars & Land Rover: Susceptibility of trim material to dye ingress
Jaguar TPJLR.52.203 - Resistance to white marking Jaguar Cars & Land Rover: Resistance to white marking (45 ° bending)
Jaguar TPJLR.52.205, Method A - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method A (polymer foils, PVC and leather)
Jaguar TPJLR.52.205, Method A - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method A (polymer foils, PVC and leather)
Jaguar TPJLR.52.205, Method B - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method B (polyurethane foam)
Jaguar TPJLR.52.205, Method B - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method B (polyurethane foam)
Jaguar TPJLR.52.205, Method C - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method C (seat foams)
Jaguar TPJLR.52.205, Method D - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method D
Jaguar TPJLR.52.205, Methode C - Susceptibility to Amine Staining Jaguar Cars & Land Rover: Susceptibility of trim material to amine staining, method C (composite material)
Jaguar TPJLR.52.207 - Resistance to Migration Staining Jaguar Cars & Land Rover: Resistance to migration staining using multi fibre cloth
Jaguar TPJLR.52.209 - Resistance to Migration Staining Jaguar Cars & Land Rover: Resistance to migration staining using white, unsupported vinyl
Jaguar TPJLR.52.210 - Cleanability Test Jaguar Cars & Land Rover: Cleanability test for interior trim materials
Jaguar TPJLR.52.211 - Soiling behavior of seating leather Susceptibility of leather to soiling
Jaguar TPJLR.52.212 - Resistance to suntan lotion Resistance to sun cream staining
Jaguar TPJLR.52.254 - Corrosion test Calcium Chloride Accelerated Corrosion Test (Russian Mud Test)
Jaguar TPJLR.52.301 - Dimensional stability under dry heat Jaguar Cars & Land Rover: Dimensional stability under humidity and dry heat, Index J and K: Procedure for dry heat
Jaguar TPJLR.52.301 - Dimensional stability under humidity Jaguar Cars & Land Rover: Dimensional stability under humidity and dry heat, Index I: Procedure for humidity
Jaguar TPJLR.52.302 - Determination of elongation and tension set Jaguar Cars & Land Rover: Determination of elongation and tension set
Jaguar TPJLR.52.351 (Exterior/ underbody/ under bonnet) - Resistance to humidity (condensation water) Jaguar Cars & Land Rover: Resistance to humidity - General, 1. Condensating humifdity
Jaguar TPJLR.52.351 (Interior/ loadspace) - Resistance to humidity (atomized water) Jaguar Cars & Land Rover: Resistance to humidity - General, 2. Atomized humifdity
Jaguar TPJLR.52.351 - Resistance to humidity Jaguar Cars & Land Rover: Resistance to humidity
Jaguar TPJLR.52.351 - Resistance to humidity Jaguar Cars & Land Rover: Resistance to humidity
Jaguar TPJLR.52.352 - Resistance to heat ageing Jaguar Cars & Land Rover: Resistance to heat ageing
Jaguar TPJLR.52.353 - Accelerated Environmental Ageing Jaguar Cars & Land Rover: Accelerated environmental cycling
Jaguar TPJLR.52.356 - High Heat & Humidity Ageing (climate cycle) Jaguar Cars & Land Rover: High heat & humidity ageing (climate cycle)
Jaguar TPJLR.52.358 - Blooming effect by water immersion Determination of the resistance to blooming by water immersion
Jaguar TPJLR.52.414 - Seam Fatigue Jaguar Cars & Land Rover: Seam fatigue of interior trim
Jaguar TPJLR.52.417 - Seam strength Determination of seam strength of textile trim materials
Jaguar TPJLR.52.419 - Load deflection and load loss Jaguar Cars & Land Rover: Load deflection and load loss of foam covered trim components
Jaguar TPJLR.52.422 - Deformation behavior (indentation and recovery) Determination of the Indentation and Recovery of Foam Parts
Jaguar TPJLR.52.423 - Determination of Surface Fibre deterioration after Ultraviolet Radiation Jaguar Cars & Land Rover: Determination of surface fibre deterioration (after ultraviolet radiation)
Jaguar TPJLR.52.425 - Trapezoid Tear Strength Trapezoid Tear Strength
Jaguar TPJLR.52.451 - Transparancy, translucence Fabric Transparency
Jaguar TPJLR.52.452 - Resistance to Curling Jaguar Cars & Land Rover: Resistance to curling
Jaguar TPJLR.52.453 - Determination of white cracking and creasing Polymeric film resistance to white cracking and creasing
Jaguar TPJLR.52.458 - Odour test Jaguar Cars & Land Rover: Determination and assessment of odour from interior trim materials, components and assemblies
Jaguar TPJLR.52.561 Method A - Resistance to high pressure cleaning operations Jaguar Cars & Land Rover: Resistance of painted exterior parts to high pressure cleaning operations
Jaguar TPJLR.52.709, Method A - Ball drop test (method A: rubber ball) Jaguar Cars & Land Rover: Resistance to low temperature impact, method A (Rubber ball)
Jaguar TPJLR.52.709, Methode B - Ball drop test (method B: steel ball) Jaguar Cars & Land Rover: Resistance to low temperature impact, method B (Steel ball)
Jaguar TPJLR.52.712 - Resistance to Blocking Resistance to Blocking
Jaguar TPJLR.52.714 - Moisture Absorption Jaguar Cars & Land Rover: Moisture Absorption
JAMA measurement method - Determination of organic emissions organic emissions from vehicle interior measurements
JASO M 403 § 6.11.2.1 method A - Abrasion test (Taber) Test method for automotive seat trim fabrics; § 6.11.2: Frictional resistance (method A, taber abrasion)
JASO M 403 § 6.1 - Determination of mass per unit Test method for automotive seat trim fabrics; § 6.1: Mass per unit area
JASO M 403 § 6.10 - Resistance to rubbing Test method for automotive seat trim fabrics; § 6.10: Resistance to rubbing
JASO M 403 § 6.12.2.1 method A - Pilling (ICI-type tester) Test method for automotive seat trim fabrics; § 6.12: Pilling (method A, ICI-type tester)
JASO M 403 § 6.20 - Burning behaviour Test method for automotive seat trim fabrics; § 6.20: Inflammability
JASO M 403 § 6.3.2 - Tensile properties Test method for automotive seat trim fabrics; § 6.3.2: Tensile strength and elongation percentage
JASO M 403 § 6.4.2.2 method B - Tearing strength (trapezoid method) Test method for automotive seat trim fabrics; § 6.4.2: Tearing strength (Method B, trapezoid)
JASO M 403 § 6.5 - Static and permanent elongation Test method for automotive seat trim fabrics; § 6.5: static and permanent elongation
JASO M 403 § 6.6 - Determination of seaming strength Test method for automotive seat trim fabrics; § 6.6: seaming strength
JASO M 403 § 6.7 - Seam weariness Test method for automotive seat trim fabrics; § 6.7: seam weariness
JASO M902 - Determination of VOC emission Road vehicles - Interior parts and materials - Measurement methods of diffused volatile organic compounds (VOC)
JIS D 1601 - Vibration testing Vibration testing methods for automobile parts
JIS K 5600-3-6 § 4 Method A - Print-free test for paint films (Gauze print method) Testing methods for paints - Part 3: Film formability - Section 6: Print free test; § 4 Method A (Gauze print method)
JIS K 5600-4-3 - Visual comparison of colour Testing methods for paints - Part 4: Visual characteristics of film - Section 3: Visual comparison of the colour of paints
JIS K 5600-5-6 - Cross-cut test Testing methods for paints - Part 5: Mechanical property of film - Section 6: Adhesion test (Cross-cut test)
JIS K6251 - Tensile stress-strain properties Rubber, vulcanized or thermoplastic- Determination of tensile stress-strain properties
JIS L 0842 - Colour fastness to carbon arc lamp light Test methods for colour fastness to enclosed carbon arc lamp light
JIS L 0849 (Crockmeter) / DIN EN ISO 105-X12 - Colour fastness to rubbing Test methods for colour fastness to rubbing - Type I rubbing tester (crockmeter)
kink test - Heat resistance - Folding stress Kink test
KMVSS Art. 95 - Flammability Flammability of interior materials
KS D 9502 - Neutral salt spray testing Korean industrial Standard - Methods of Neutral Salt Spray Testing
Landrover LRLTM.30.MS.302 - Burning behaviour Flammability of interior materials
LAW 112 - Determination of the free and the hydrolysed formaldehyde content Japanese Method: Determination of formaldehyde concentration
LC/MS LC/MS Messungen
Leaching of solid materials (Batch test) Watery elution of solid materials (Batch test)
Lotus LMS 019 - burning behaviour Test method for flammability of interior
Lotus LMS012 - Salt spray test Material Tests - Test method for the resistance to salt fog
LV 124 § 15.1.2 - Chemical resistance Electrical and electronic components in motor vehicles - Environmental requirements and testings § 15: Chemical requirements and tests
Mace Snag Test - Determination of the thread puller tendency (Mace Snag Test)
MAN 277 - Scratching with knife Adhesion test (scratching test)
MAN M 3577 - Snag test Upholstery cover materials - Snag test
MAN M 3657 - Cream resistance Surfaces in the vehicle interior - Cream resistance - Test instructions
MAN M 3683 - Soiling and cleaning behaviour Soiling and cleaning behaviour of plastic components in the vehicle interior - Test instruction
MAN M3658 - Hardness test (shore AO) Hardness testing- PUR integral foam - Steering wheel rim
MAN M3682 - Hook- and loop test Hook fastener test on upholstery fabrics
Manual function control Manual function control
Manual function control under load General method - Manual function control under load
Mar resistance as per Oesterle - Scribing sensitivity Mar resistance
Martindale testing equipment kit Equipment for Martindale device, according to DIN EN ISO 12947-1
Mass balancing Mass balancing
Mass determination, weighing Mass determination, weighing
Mazda MES CF 050D - Burning behaviour Flammability of Interior parts
Mazda MES CF 055 B - Odor test Odor from cabin parts
Mazda MES MN 405S § 7.18 - Dust adhesion and removability Dust adhesion and removability
Mazda MES MN 405S § 7.22.1 - Color fastness to wash / immersion Color fastness to wash
Mazda MES MN 405S § 7.22.2 - Stain resistance (water spotting) Stains
Mazda MES MN 405S § 7.23.1 A (Xenon arc) - Colour fastness to light (Xenon arc method) Xenon arc lamp equivalent to JIS B 7754
Mazda MES MN 405S § 7.9.1 - Seam strength Mazda - Determination of the seam strength
Melting temperature (VW, DSC) - Determination of melting behaviour (DSC) Melting temperature by DSC (dynamic scanning calorimetry)
Meteorological data; sampling Meteorological data at sampling
Method book BGK e.V. (RG) Self heating / grade of decompose
Microscopical analysis, procedure after Stratmann Textiles: microscopical analysis, procedure after Stratmann
Microscopy Microscopy
Migration staining Migration staining
Mikrotomschnitt
Mildew resistance - Storage in a desiccator Mildew resistance - General test method - Storage in a desiccator with water
Misuse Test Misuse Test
Mitsubishi - Odor - Odor test
Mitsubishi ES-W83217/ ES-X83217 § 4.12.2 - Carbon arc light resistance Fabrics and Sheets - Fade Resistance - Method B
Mitsubishi ES-X60410 - Flammability Flammability of interior materials
Mitsubishi ES-X63129 § 4.18 - Wear resistance (crockmeter) Paint Film - For Flexible Thermoplastic Parts, § 4.18 Wear resistance
Mitsubishi ES-X83217 § 4.28 - Seam fatigue resistance Test standard - Polyvinyl chloride coated - Fabrics and polyvinyl chloride sheet - interior & exterior; § 4.28: Seam fatigue resistance
Mitsubishi ES-X83220 § 4.10 - Shift Strength Test standard - Woven fabrics, knittings; § 4.10: Shift strength
Mitsubishi ES-X83220 § 4.14.1A - Light Resistance Test Standard - Woven Fabrics, Knittings - Light Resistance (Xenon Arc Lamp)
Mitsubishi ES-X83238 § 3.8 - Heat sag Standard test method - Plastics elastomer for exterior; § 3.8: Heat sag
Mitsubishi ES-X83239 § 4.14 - Light resistance Standard test methods - Interior plastic parts § 4.14 Xenon arc fading lamp test
Mitsubishi ES-X83239 § 4.20 - Wear resistance, plane surfaces Standard test methods - Interior plastic parts § 4.20 Wear resistance
Mitsubishi ES-X83252 - VOC measuring method of interior materials VOC measuring method of interior materials
Modified oil staining test for Leather Modified oil staining test for Leather
Molit Notification No. 2019-144 - Determination of organic emissions Control standard for in - car air quality for new motor vehicles
NES M0603 §7 - Content rate of ether soluble substance Test method of Felts for Automobiles - §7 Content rate of ether soluble substance
NIO TP DUR-019 § 09 - Resistance to high pressure cleaning operations Resistance of painted plastic parts to high pressure cleaning operations
NIO TP DUR-019 § 11 - Resistance to Scratching Paint performance requirements for interior plastic parts § 11 Resistance to scratching
NIO TP DUR-019 § 13 - Resistance to water and soap spotting NIO TP DUR-019 § 13 Resistance to water and soap spotting
NIO TP DUR-019 § 15 - Soiling and Cleanability Paint performance requirements for interior plastic parts § 15 Soiling and cleanability: grease and coffee soiling agents
NIO TP DUR-019 § 16 - Resistance to suntan lotion and insect repellent Paint performance requirements for interior plastic parts
NIO TP DUR-019 § 17 - Perspiration resistance Paint performance requirements for interior plastic parts
NIO-TP.GS.002-2016 (Variant 1) - Odor test Determination of the odor charcteristics of trim materials in vehicles
NIO-TP.GS.002-2016 (Variant 2) - Odor test Determination of the odor characteristics of trim materials in vehicles (variant 2)
NIO-TP.GS.002-2016 (Variant 3) - Odor test Determination of the odor characteristics of trim materials in vehicles (variant 3)
NIO-TP.GS.003-2016 - Fogging (gravimetric) Determination of fogging characteristics of vehicle trim parts and materials
NIO-TP.GS.004-2017 - Determinaton of VOC (bag method) Determination of volatile organic compounds from non-metallic automobile interior materials - 10 l tedlar bag method
Nissan - Seam strength General test method - Nissan - Seam strength (eg. Nissan NES M0602 § 13)
Nissan E 21421NDS02 § 6.10 - High pressure car wash resistance High pressure car wash resistance
Nissan NES 87000NDS00 § 13.4 - Seam fatique test Nissan NES 87000NDS00 Nissan Design Specification (NDS) § 13.4 Seam fatique of cover complex material
Nissan NES M0076 § 12 - Tensile strength and elongation test method Test Methods for Automotive Carpet; § 12: Tensile strength and elongation test method
Nissan NES M0076 § 13 - Tear strength test method Test Methods for Automotive Carpet; § 13: Tear strength test method (Trapezoid)
Nissan NES M0076 § 14 - Tuft binding strength test method Test Methods for Automotive Carpet; § 14: Tuft binding strength test method
Nissan NES M0076 § 16 - Abrasion Resistance Test Methods for Automotive Carpet; § 16: Test Method for Abrasion Resistance
Nissan NES M0094 - after ageing - Burning behaviour Test method of flammability of interior materials for automobiles (after ageing)
Nissan NES M0094 - after aging - Burning behaviour Test method of flammability of interior materials for automobiles (after ageing)
Nissan NES M0094 - after aging - burning behaviour Test method of Flammability of materials for automobiles
Nissan NES M0094 - received condition - Burning behaviour Test method of flammability of interior materials for automobiles (as received)
Nissan NES M0094 - received condition - Burning behaviour Test method of flammability of interior materials for automobiles (original)
Nissan NES M0094 - received condition - burning behaviour Test method of Flammability of materials for automobiles
Nissan NES M0131 - High Temperature Test (Irradiation Testing) Methods of high temperature test for passenger compartment synthetic resin parts
Nissan NES M0131 - High temperature test (irradiation testing) Methods of high temperature test for passenger compartment synthetic resin parts
Nissan NES M0132 - Thermal cycle testing Methods of Thermal cycle testing for platic parts
Nissan NES M0133, Method 1 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 1: type 1 (parts used as containers or equivalent), type 2 (parts normally exposed to chemicals), by immersion
Nissan NES M0133, Method 2 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 2: Interior parts, by wiping
Nissan NES M0133, Method 3 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 3: Exterior parts, by Dripping
Nissan NES M0133, Method 4 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 4: Parts inside engine compartment, dripping
Nissan NES M0133, Method 5 - Chemical resistance Testing methods of chemical resistance for plastic parts - Method 5: Interior and exterior Parts (ABS, PMMA, PC, PPE, PAT), by application
Nissan NES M0134 - Falling ball impact test Falling ball impact test methods for synthetic resin parts
Nissan NES M0135, Method 1 (interior) - Weathering and light stability Weatherability and light resistance test methods for synthetic resin parts
Nissan NES M0135-1 (inside cabin) - Weatherability and light resistance Weatherability and light resistance test methods for Synthetic Resin Parts (Method 1: inside cabin)
Nissan NES M0138 - CASS - Copper-accelerated salt spray test Corrosion tests CASS test - Salt spray tests (Copper-accelerated salt spray test)
Nissan NES M0140 - Salt spray testing Corrosive salt spray test for plated or painted metals
Nissan NES M0141 % 6.2.1 - Pencil scratch test, by hand Methods of test for coating of synthetic resin, § 6.2.1 Pencil scratch test, by hand
Nissan NES M0141 § 5.1, Variant 1 - Odor test Methods of test for coating of synthetic resin; § 5.1: Offensive odor (Room temperature, 24 h)
Nissan NES M0141 § 5.1, Variant 2 - Odor test Methods of test for coating of synthetic resin; § 5.1: Offensive odor (100 °C, 4 h)
Nissan NES M0153 - Moisture resistance Testing methods of moisture resistance for plastic parts
Nissan NES M0154 § 14 - Tear strength Testing Methods of Fabrics for Automobiles § 14 Tear Strength Test Method
Nissan NES M0154 § 15 - Seam strength Testing methods of fabrics for automobiles; § 15: Seam strength test method
Nissan NES M0154 § 18.1 - Abrasion strength (Method 1, taber abraser) Testing methods of fabrics for automobiles; § 18.1: Abrasion strength test method (Method 1, Taber abraser)
Nissan NES M0154 § 23 - Scratch resistance test method II (Mace method) Scratch resistance test method II (Mace method)
Nissan NES M0154 § 33.2 method II, based on - Soil resistance (soiling and cleanability) Testing methods of fabrics for automobiles; § 33.2: Soil resistance, test method II
Nissan NES M0154 § 34 - Water staining Testing methods of fabrics for automobiles; § 34: Water stain test method
Nissan NES M0154 § 35 - Cleanability test Testing methods of fabrics for automobiles; § 35: Cleanability test method
Nissan NES M0159-A - Scratch resistance Testing method of the scratch resistance of interior Polypropylene resin parts; Method A Crosscut adhesion testing machine, with tungsten steel needle / evaluation of whitening
Nissan NES M0159-B - Scratch resistance Testing method of the scratch resistance of interior Polypropylene resin parts; Method B Crosscut abrasion testing machine, with scratching jig of stainless steel acc. to NES M8022 / evaluation of gloss change
Nissan NES M0159-D - Scratch resistance Testing method of the scratch resistance of interior Polypropylene resin parts; Method D: D1) Evaluation of the change in whitening and D2) Evaluation of the change in gloss
Nissan NES M0160 - Odor test Method of testing the smell of interior parts
Nissan NES M0160 - Odour test Method of testing the smell of interior parts
Nissan NES M0160 - Odour test Method of testing the smell of interior parts
Nissan NES M0297 / NES M0402 (Method I) - Determination of volatile organic compounds (VOC) Odor substance usage restrictions (NES M0297 with list of limit values) / VOC test method of cabin parts, M0402 method 1 (Parts)
Nissan NES M0297 / NES M0402 (Methode II) - Determination of volatile organic compounds (VOC) Odor substance usage restrictions (NES M0297 with list of limit values) / VOC test method of cabin parts, M0402 method 2 (Material - cutting out of a part)
Nissan NES M0402 (Method II)/M0403 - Determination of volatile organic compounds (VOC) VOC Test Method of Cabin Parts; Method 2 (M0403 = list of limit values)
Nissan NES M0602 - Method II-1 - Abrasion resistance of leather coating Testing Methods of Genuine Leather and Polyurethane Leather and Polyvinylchloride Coated Fabric for Automobiles, § 19.2.1 Examination of abrasion resistance of leather coating
Nissan NES M0602 - Method II-2 - Abrasion resistance of polyurethane leather and vinyl leather cloth Testing Methods of Genuine Leather and Polyurethane Leather and Polyvinylchloride Coated Fabric for Automobiles, § 19.2.2 Examination of abrasion resistance of polyurethane leather and vinyl leather cloth.
Nissan NES M0602 § 16 - Peeling resistance Testing Methods of Genuine Leather and Polyurethane leather and polyvinylchloride coated fabric for Automobiles - § 16 Peeling resistance test method
Nissan NES M0602 § 24 - Colour transfer by rubbing (Gakushin) Testing methods of genuine leather and polyurethane leather and polyvinylchloride coated fabric for automobiles- Denim material color transfer by rubbing with Gakushin type friction test device
Nissan NES M0602 § 24 - Colour transfer by rubbing (Gakushin) Testing methods of genuine leather and polyurethane leather and polyvinylchloride coated fabric for automobiles- Denim material color transfer by rubbing with Gakushin type friction test device
Nissan NES M0608 § 5.1.1 - Colour measurement (CIELAB) The measurement method of color and gloss of interior parts; § 5.1.1 Color measurement
Nissan NES M0608 § 5.1.2 - Gloss measurement The measurement method of color and gloss of interior parts; § 5.1.2 gloss measurement
Nissan NES M7081 § 13 - Static and permanent elongation PVC Coated Fabric for Automobiles; § 13: Constant load elongation rate and residual distortion rate testing procedure
Nissan NES M7081 § 14 - Peeling strength PVC-Coated Fabric for Automobiles; § 14: Peeling strength testing procedure
Nissan NES M7081 § 15 - Crumpling resistance NES - PVC-Coated Fabric for Automobiles; Crumpling Resistance Testing Procedure
Nissan NES M7081 § 21 - Heat shrinkage PVC-Coated Fabric for Automobiles; § 21: Heat shrinkage testing procedure
Nissan NES M7081 § 9 - Tensile properties PVC-Coated Fabric for Automobiles; § 9: Tensile Strength and Elongation Rate Testing Procedure
Number of filaments Textiles: Determination of number of filaments
Odor - Odor test
Odour profile (qualitative) Odour profile (qualitative), examination of the qualitative odour without pretreatment
Opel GMW 14145 - Seam strength Seam strength
Opel/GM GMW 14333, Method A (Dip) - Resistance to Fuels Resistance to Fuels of Exteriors Automotive Materials and Components
Opel/GM GMW 14333, Method B (Continous immersion) - Resistance to Fuels Resistance to Fuels of Exteriors Automotive Materials and Components
Optical sample measurement Optical sample measurement
Outdoor weathering Outdoor weathering
Oven drying Oven drying
Oven drying (100°C) Dry matter and water content at 100°C
Oven drying (105°C) - Determination of dry matter and water content Dry matter and water content at 105°C
Oxidative aging of the heavy layer Test of oxidative aging of the heavy layer
Paccar CMT 0021 Procedure 4.3.3 / (DIN EN 60068-2-74 § 10 - Class C) - Resistance to automotive fluids - (Class C - extended contamination) Resistance to automotive fluids (DIN EN 60068-2-74 § 10 - Procedure Class C - extended contamination)
Paccar CS 0021 - Resistance to automotive fluids Resistance to automotive fluids
Paint structure - Waviness, measurement with wave-scan systems General method on paint structure measurement
PATAC TS-BD-003 - Bag Emission Test
Performance of seat heating - Function after cold storage Climate test / climate storage (cold storage)
Phase 4 - model and prototype Design - Phase 4: model and prototype, preparation for presentations - acceptance by customers and transfer of results
Phenolic yellowing Phenolic yellowing (eg "Courtaulds method" Triumph Suppliers Policy)
Photogrammetric measurement Photogrammetric measurement, three dimensional
Photogrammetry Photogrammetry
Photometrische Bestimmung analog DIN EN 717-3 - Determination of formaldehyde by the acetylacetone method Photometric determination of formaldehyde by the acetylacetone method
Porsche creme resistance Creme resistance (e.g. for PTL 4025, PTL 5536, PTL 5538 or VW 96135, VW 96183, VW 96184)
Porsche PPV 4014-A / VW 96378 (SST 90 °C) - Weathering in dry hot climate Exterior - Weathering of non-metallic materials - Testing in dry-hot climate (SST: 90 °C)
Porsche PPV 4014-B / VW 96378 (SST 65 °C) - Weathering in warm and humid climate Exterior - Weathering of non-metallic materials - Testing in warm and humid climate (SST: 65 °C)
Porsche PPV 4015 / VW 96379 - Climate cycle test Exterior - Test of add-on parts - Climate cycle test
Porsche PPV 4017/ VW 96380 variant 1A - Corrosion test Surface protection - Corrosion test - modified alternating climate test
Porsche PPV 4025 / VW 96386 - Color comparison in the color matching cabinet hue control - Color comparison in the color matching cabinet
Porsche PPV 4046 - A / VW 96387 - Flexural strength (3-point bending test) Roof lining - Headliner - flexural strength (bending stiffness) § 5.1 Test method - A (3-point bending test)
Porsche PPV 4050 / VW 96390 (aged) incl. ageing - Determination of volatile organic emissions in SHED chambers Determination of Volatile Organic Emissions from non-fuel impinging components - Measuring emissions in SHED chambers (aged, incl. ageing)
Porsche PPV 4050 / VW 96390 (as received condition) - Determination of volatile organic emissions in SHED chambers Determination of Volatile Organic Emissions from non-fuel impinging components - Measuring emissions in SHED chambers (as received condition)
Porsche PPV 4060 - Dynamic mechanical analysis (DMA) Fiber-reinforced plastics - Determination of the glass transition temperature using dynamic mechanical analysis (DMA)
Porsche PPV 5002 - A / VW 96395 - Shrinkage behavior Leather - Determination of area-shrinkage and shrinkage-force - A - area shrinkage
Porsche PPV 5002 / VW 96395 - Shrinkage behavior Leather - Determination of shrinkage behavior
Porsche PPV 5242, VW 96446 (VDA 675-242-A) - Paint indifference, method A: contact discoloration and environment discoloration due to migration Elastomers - Lacquer indifference - Discolouration of organic materials by means of elastomers - Test methods for determination of characteristics, method A: contact discolouration and discolouration due to migration
Porsche PPV 7000 / VW 96408 § 6.2 Cataplasm - Cataplasm storage Adhesive and Sealing Materials - Peel Test § 6.2 Cataplasm
Porsche PPV 7000 / VW 96408 § 7 - Bead peel test Adhesive and Sealing Materials - Peel Test § 7 Bead Peel Test
Porsche PPV 7750 / VW 96417 - Resistance to stress cracking Automobile - Chemical resistance of plastics and thermoplastic elastomers in combination with mechanical stresses
Porsche PPV 8040 / VW 96422 - Determination of organic emissions Measurement of organic emission of the vehicle interior
Porsche PPV 8041 / VW 96423 - Emission measuring in a test cabinet Interior - Emission behaviour - Emission measuring in a test cabinet (following VDA 276-1)
Porsche PPV 8042 / VW 96424 - Emission test with thermodesorption analysis (based on VDA 278) Interior - Emission behavior by thermodesorption analysis (based on VDA 278)
Porsche PTL 5522 § 3.11 (based on DIN EN ISO 105-X12) - Resistance to cleaning agents Paintwork - Non-metallic materials for interior; § 3.11: Resistance to cleaning agents (crockmeter test)
Porsche PTL 5522 § 3.3.2 - Peel test Paintwork - Non-metallic materials for interior; § 3.3.2: Peel test (for soft basic materials)
Porsche PTL 5522 § 3.6 - Scratch resistance Paintwork - Non-metallic materials for interior; § 3.6: Scratch resistance (finger nail test)
Porsche PTL 5522 § 3.7 - Elasticity Paintwork - Non-metallic materials for interior; § 3.7: Elasticity
Porsche PTL 5525 / VW 96173 § 7.5 - Adhesion: Scratch test Paintwork of body outer panels made of hard plastics (thermoplastics and duroplasts) - Requirements and tests; § 7.5: Adhesion: Scratch test
Porsche PTL 5538 / VW 96184 § 5.4.8.2 - Soiling and cleanability Interior - Decorative surface (wood, carbon, piano lacker, metall) - Tests and requirements; § 5.4.8.2: Soiling and cleaning behavior of unprotected 'open' decorative surfaces
Porsche PTL 7524 § 4.5.5 - Corrosion test with brake dust
Porsche PTL 8140 / VW 96238 § 6.7 - Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12) Interior - General requirements of components and semi-finished materials - Requirements and tests; § 6.7: Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12)
Porsche PTL 8140 / VW 96238 § 6.7 - Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12) Interior parts - Tests and requirements; § 6.7: Fastness to rubbing / Resistance to cleaning agents (DIN EN ISO 105-X12)
Porsche PTL 8501 / VW 96243 - Burning behaviour Interior - Burning behaviour - requirements and testing
Porsche PTL 8501 / VW 96243 - Burning behaviour Interior - Burning behaviour - requirements and testing
Porsche resistance to media (crockmeter) - Surface resistance to media Surface resistance to media (e.g. for PTL 4025, PTL 5536, PTL 5538 or VW 96135, VW 96183, VW 96184)
Porsche VA.PK.033 § 5.3 - Colour comparison in the colour matching cabinet Colour shade examination; § 5.3: Colour comparison in a colour viewing booth
Potential difference (step test) Potential difference (step test)
Preformed volatile N-Nitrosamines (based on BGI 505.23) Method for determination of N-nitrosamines
Proof of silicone presence, qualitative Proof of silicone presence, qualitative
Protective film compatibility General method for coatings and paints
PSA B15 4140 § 3.2.1 - Layer thickness measurement Coating - electrolytic chromium plating on plastic parts §
PSA B15 4140 § 4.1.1 - Crack density Coatings - Electrolytic Chromium Plating on Plastic Parts - Crack on the Chromium Plating
PSA B15 4140 § 8.1 - Crack and pore density Electrolytic chrome plating on plastic parts § 8.1 Cracking or porosity of the chrome coating
PSA D10 5495 - Determination of volatile organic compounds (VOC) PSA Peugeot - Citroen: Materials in vehicle passenger compartment - Assessment of the quantity of volatile organic compounds (VOC) by thermodesorption / GC / MS (FID)
PSA D10 5496 - Amine emission Search for basic amine type volatiles in polyurethane materials from the vehicle passenger compartment
PSA D10 5496 - Amine emission Materials in vehicle passenger compartment: Search for basic volatiles type amines in polyurethane materials
PSA D10 5517 - Odour test PSA Peugeot - Citroen: Parts in passenger compartment and boot - Assessment of odour strength - Assessment against damning descriptive terms
PSA D10 5517 - Odour test PSA Peugeot - Citroen: Parts in passenger compartment and boot - Assessment of odour strength - Assessment against damning descriptive terms
PSA D11 1157 - Peeling at a low angle PSA Peugeot - Citroen: Adhesives and covering materials; Peeling at a low angle
PSA D11 1157 - Peeling test PSA Peugeot - Citroen: Adhesives and covering materials; Peeling at a low angle
PSA D12 4400 - Capacity of absorbing the curve unevenness Side protections glued on the exterior of the body - Capacity of absorbing the curve unevenness sheet/ side protection
PSA D12 4410 - Resistance to pullout side protections glued on the exterior of the body - Resistance to pullout on the edge
PSA D14 1055 - Rubbing wear PSA Peugeot - Citroen: Organic materials and coatings - Rubbing wear
PSA D14 3108 - Colour fastness (Veslic abrasion) Leather - Tests for colour fastness - (Veslic abrasion)
PSA D15 1343 - Visual color assessment PSA Peugeot - Citroen: Coloured materials - Visual comparison of colours in a light chamber
PSA D15 5084 - Colour measurement (CIELAB) PSA Peugeot - Citroen: Opaque or transparent coloured products - Calculations of colourimetric variations (CIE LAB 1976 System)
PSA D17 1058 - Salt spray fog test PSA Peugeot - Citroen: Materials and coatings - Salt spray test of 5% NaCl and methods of grading
PSA D17 1058 - Salt spray fog test Materials and Coatings - Salt Spray Test of 5% NaCl and Methods of Grading
PSA D23 1001 - Copper Accelerated Acetic Salt Spray Test (CASS-Test) PSA Peugeot - Citroen: Metal Coating - Copper Accelerated Acetic Salt Spray Test (CASS-Test)
PSA D23 5201 - Behaviour against hand and sun creme PSA Peugeot - Citroen: Coatings for decorative interior plastic parts - Behaviour with creams and lotions
PSA D24 5011 - Abrasion behavior (crockmeter) by gloss measurement Paint coatings - Resistance to dry abrasion method with abrasive material
PSA D24 5020 - Abrasion resistance (Abrex) PSA Peugeot - Citroen: Coatings for decorative interior plastic components - Abrasion resistance - Abrex Test Method
PSA D24 5021 - Hydrolysis resistance with scratch test Coatings for painted plastic parts for interior, hydrolysis resistance
PSA D25 1056 - Measurement of coating thickness - Coulometric method by anodic dissolution Electrolytic coating thickness (by anodic dissolution)
PSA D25 1075 - Cross hatch test Paint Coatings - Cross Hatch Test
PSA D25 1075 - Cross hatch test Paint Coatings - Cross Hatch Test
PSA D25 1413 - Gloss measurement (20°, 60°, 85°) PSA Peugeot - Citroen: Paint coatings - Rubber and plastics - measurement of gloss
PSA D25 5001 - Adhesion after cross-cut (St. Andrews cross) PSA Peugeot - Citroen: Paint coating - Adhesion evaluation by means of counter brace (St. Andrews cross)
PSA D25 5540 - Waviness, measurement with wave-scan Coatings of paintings - Measure of goose flesh and clearness of image - aspect measurement dual wave scan
PSA D27 1327 - Resistance to immersion in water Paint Coatings - Resistance to Immersion in Water (Ford Tank)
PSA D27 1327 - Resistance to immersion in water Paint Coatings - Resistance to Immersion in Water (Ford Tank)
PSA D27 1389 - Artificial ageing by weather-ometer PSA Peugeot - Citroen: Paint coatings - Rubbers and plastics - Artificial ageing by weather-ometer
PSA D27 1433 - Resistance to sulphuric acid (30 %) PSA Peugeot - Citroen: Paint coatings and similar products - Resistance to diluted sulphuric acid
PSA D27 5144 - Staining PSA Peugeot - Citroen: Paint coatings and similar products - Staining
PSA D27 5377 - Staining by chemical products PSA Peugeot - Citroen: Paint coatings - Staining by chemical products
PSA D27 5415 § 9.1.4 - Cataplasma storage Paint Coatings - Resistance to biological attacks § 9.1.4 Fourth stage
PSA D27 5437 - Solvent resistance PSA Peugeot - Citroen: Paint coatings - Solvent resistance
PSA D40 5535 - Analysis of formaldehyde and other carbonyl compounds PSA Peugeot - Citroen: Analysis of formaldehyde and other carbonyl compounds of materials in the vehicle passenger compartment by liquid chromatography
PSA D41 1003 - Resistance to compression (compression load deflection) Flexible Cellular Materials - Resistance to Compression (Lifting)
PSA D41 1015 - Peeling test PSA Peugeot - Citroen: Trim material - Peeling at 180°
PSA D41 1029 - Tensile strength PSA Peugeot - Citroen: Textiles, coated textiles and leathers - Tensile strength
PSA D41 1097 - Puncture resistance Floor coverings and trims - Puncture resistance
PSA D41 1126 - Tear strength PSA Peugeot - Citroen: Textiles - Plastic coated textile (PCT) - Plastic sheets - Carpet - Leathers: Tearing
PSA D41 1588 - Resistance of seams to traction PSA Peugeot - Citroen: Covering materials - Resistance of seams to traction
PSA D42 1007 - Permanent folding PSA Peugeot - Citroen: see Renault RT D42 1007: Plastic coated textiles and lining - Wrinkling
PSA D42 1008/ F - Cold brittleness PSA Peugeot Citroen: Leather, Plastic or Rubber coated Textiles, Plastic sheets - Cold Brittleness
PSA D42 1047 - Dynamic fatigue (thickness loss, compression load deflection and compression set) Flexible Cellular Materials - Dynamic Fatigue by Compression with Set Deformation
PSA D42 1235 - Impact strength (falling-weight method) PSA Peugeot - Citroen: Rubber and plastic parts - Impact strength (Falling weight method)
PSA D42 1775/ C - Resistance to scoring by abrasion PSA Peugeot - Citroen: Interior and exterior plastic parts - Resistance to scoring by abrasion
PSA D44 1073 - Wear by rubbing PSA Peugeot - Citroen: Covering materials - Wear by rubbing
PSA D44 1221 - Resistance to scrapping PSA Peugeot - Citroen: Materials with velveted surface - resistance to scraping
PSA D44 1221 - Resistance to scuffing PSA Peugeot - Citroen: Materials with brushed velour surface - Resistance to scuffing
PSA D44 1846 - Pilling (Martindale-method) PSA Peugeot - Citroen: Textiles - Tendency to bobbling & Fluffing by rubbing (Pilling / Martindale-method)
PSA D44 5600 (knitted fabric) - Mace Snag Test PSA Peugeot - Citroen: Resistance to yarn pulling - Mace snag method
PSA D44 5600 (woven fabric) - Mace Snag Test PSA Peugeot - Citroen: Resistance to yarn pulling - Mace snag method
PSA D45 1010 - Colour fastness to rubbing PSA Peugeot - Citroen: Polymer materials and parts - Inside and outside passenger compartment - Colourfastness to rubbing
PSA D45 1012 - Determination of mass per unit PSA Peugeot - Citroen: Sheet materials - Surface mass
PSA D45 1013 - Procedure B - Determination of thickness (optical measurement) Determination of the thickness of various materials (with the exception of compressible materials such as felts, wadding, plastic foams, cell rubbers, etc.) - - Procedure B (optical measurement)
PSA D45 1014 - Number of threads or stitches Textiles - Thread count
PSA D45 1028 - Measurement of the overall width Materials in rollers - Measurement of the overall width
PSA D45 1030 - Flexibilität PSA Peugeot - Citroen: Plastic or rubber coated textiles - Flexibility of a loop
PSA D45 1045 - Determination of apparent density Cellular materials - Apparent density
PSA D45 1046 - Determination of compression set Flexible cellular trim materials - Compression set with constant thickness
PSA D45 1124 - Static and permanent elongation PSA Peugeot - Citroen: Textiles and coated textiles - static elongtion under low load and residual elongation
PSA D45 1139 - Dimensional variations and changes in appearance under heat PSA Peugeot - Citroen: Covering materials - Dimensional variations and changes in appearance under heat
PSA D45 1195 - Determination of thickness and compressibility PSA Peugeot - Citroen: Felts and waddings - Thickness and compressibility
PSA D45 1195 - Determination of thickness and compressibility PSA Peugeot - Citroen: Felts and waddings - Thickness and compressibility
PSA D45 1234 - Heat resistance PSA Peugeot - Citroen: Parts containing plastic elements - Reaction to heat in a non-radiant dry oven
PSA D45 1333 - Burning behaviour PSA Peugeot - Citroen: Materials interior to passenger compartment - Horizontal combustibility
PSA D45 1333 - Burning behaviour Interior materials from the cabin horizontal flammability
PSA D45 1333 - burning behaviour Interior cabin materials horizontal flammability
PSA D45 1429 - Determination of water absorption Cellular Materials - Absorption of Water
PSA D45 1601 / Renault D45 1601 - Volatility of additives PSA Peugeot - Citroen: Materials in passenger compartment - Volatility of additives on surfaces
PSA D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) PSA Peugeot - Citroen: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging F)
PSA D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) Interior trim materials and passenger compartment parts - Fogging F (reflectometric)
PSA D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) PSA Peugeot - Citroen: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging G)
PSA D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) Interior trim materials and passenger compartment parts - Fogging G (gravimetric)
PSA D45 1730 - Burning behavior (Test with incandescent wire) Plastics burning behavior (Test with indandescent wire)
PSA D45 1992 - Resistance to Curling Trim materials - Curling effect
PSA D45 5128 - Hysteresis characteristics Flexible and Semi-Rigid Cellular Materials - Damping and Resilience
PSA D45 5331/ C - Breaking angle at folding PSA Peugeot Citroen: Trim composite materials - Tendency to form folds
PSA D45 5492 - Infrared spectroscopy (ATR assembly) Polyurethane Foams - Identification of the Type of Foam - Infrared Spectrometry
PSA D45 5523 - Resistance to scratching PSA Peugeot - Citroen: Resistance to scratching (sclerometer test)
PSA D45 5601 - Formation of folds on convex half spheres Aptitude of a flexible material to mating with a convex shape, trim tester method
PSA D45 5650 - Air permeability of textile fabrics Flexible Materials - air permeability test
PSA D47 1005 (Leather) - Water staining PSA Peugeot - Citroen: Textiles - Water and other staining; § 7.2: Leather
PSA D47 1005 (Textiles) - Water staining PSA Peugeot - Citroen: Textiles - Water and other staining; § 7.1: Textiles
PSA D47 1020 (3.8.1 Water) - Resistance to water PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.1: Distilled water
PSA D47 1020 (3.8.2 sea water) - Resistance to sea water PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.2: Sea water
PSA D47 1020 (3.8.3 alkaline perspiration) - Resistance to alkaline perspiration PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.3: Basic perspiration
PSA D47 1020 (3.8.4 acid perspiration) - Resistance to acid perspiration PSA Peugeot - Citroen: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.4: Acid perspiration
PSA D47 1165 - H - Cataplasm storage PSA Peugeot - Citroen: Products applied to body-in-white or paint coated body, plastics - Accelerated ageing; Condition H (Exposure in humid cataplasm)
PSA D47 1165 - N, R, W, X - Climate storage PSA Peugeot - Citroen: Products applied to body-in-white or paint coated body, plastics - Accelerated ageing; only methods N / R / W / X (climate storages)
PSA D47 1217 - Behaviour in humid atmosphere - Resistance to micro-organisms PSA Peugeot - Citroen: Felts, padding, wood fibre - Behaviour in humid atmosphere - Resistance to micro-organisms
PSA D47 1279 - Behaviour when in contact with protection and protection removal products PSA Peugeot - Citroen: Plastic components - Behaviour when in contact with protection and protection removal products
PSA D47 1309 - Climate cycle test PSA Peugeot - Citroen: Materials and parts for automotive equipment - Ageing according to a given climatic cycle
PSA D47 1309 - Climate cycle test PSA Peugeot - Citroen: Materials and parts for automotive equipment - Ageing according to a given climatic cycle
PSA D47 1431 - Colour fastness to artificial light PSA Peugeot - Citroen: Materials and parts for passenger compartment - Appearance and behaviour to artificial light at high and mean temperatures (Colour fastness)
PSA D47 5099 - Cataplasm storage Sound deadening materials under engine bonnet - Resistance to fluids (Cataplasm method)
PSA D47 5148 - Difference in compression strength after wet heat ageing Cellular Materials Made out of Polyurethan - Wet Heat Ageing
PSA D47 5252 - Light fastness PSA Peugeot - Citroen: Materials and parts in the passenger compartment - Appearance behaviour to artificial light at a low temperature
PSA D47 5530/ D - Abrasion of leather by rubbing of seams PSA Peugeot - Citroen: Leathers - Abrasion of leather by rubbing the seams
PSA D49 1653, in accordance - Soiling and cleaning ability Trim Materials - Tendency to soiling and cleaning capacity
PSA D51 1485 - A - Peeling at 90° (Process A) PSA Peugeot - Citroen: Adhesives - Peeling at right angle (Process A)
PSA DPCA D10-0003 - Determination of volatiles Determination of Volatile Organic Compounds and Carbonyl Substances in Automobile Non-metal Materials and Parts ----Tedlar Bag Method
Pull-off force Pull-off force general
PVC-proof according to Beilstein method PVC-proof according to Beilstein method
Pyrolysis-GC-MS Pyrolysis-GC-MS, Pyrolysis - gas chromatography with mass spectrometry
Pyrolysis-IR
Qoros Qosta-EVR300000.02 - Determination of volatile organic compounds Determination of the emission of volatile organic compounds from vehicle interior parts
Qoros QOSTA-PNT000006 - Chemical resistance Chemical resistance of paint coatings
Raman-Spectroscopy Raman-Spektroskopie
Reanult D45 1291 (Shore A) - Evaluation of shore A Hardness Rubbers and Plastics Shore Hardness A or D
Reduction of grit size, sample preparation Sample preparation; reduction of grit size
Renault 1474 - Heat-light aging Heat light aging in Xenotest 150 A 90°C - Textiles, T.E.P., threads, trim leathers
Renault 1634 - Adhesion Adhesion of the coating - various materials, for eg textiles, carpet
Renault D11 1157 - Peeling at a low angle Adhesives and covering materials - Peeling at a low angle
Renault D14 1055 - Mechanical wear through abrasion Organic materials and coatings - Rubbing wear
Renault D15 1343 - Visual comparison of colours Coloured materials - Visual comparison of colours in light chamber
Renault D15 3200/--A, ME mode - Photoageing Accelerated photoaging testing using SEPAP MHE chamber
Renault D15 5084 - Colour measurement (CIELAB) Renault: Opaque or transparent coloured products - Calculations of colourimetric variations (CIE LAB 1976 System)
Renault D17 2028-C - Corrosion Test Corrosion test by automatic change of phases of salt spray, drying and humidity (ECC1)
Renault D21 3092 - Scratch resistance with Erichsen hardness tester, model 318 Paints and related products applied onto plastic material - Tearing resistance measured with sclerometer / scratch resistance
Renault D21 3093 - Adhesion after cross-cut (St. Andrews cross) Renault: Paint coating - Adhesion evaluation by means of counter brace (St. Andrews cross)
Renault D25 1413 - Gloss measurement (20°, 60°, 85°) Paint coatings, plastics and rubbers - Gloss measurement
Renault D27 1911 / D - Artificial ageing by weather-ometer Rubber and Plastic Paint Coatings- Artificial Ageing Using Weatherometer
Renault D40 3004 / -- A - Analysis of formaldehyde and other carbonyl compounds Renault, Analysis of formaldehyde and other carbonyl compounds
Renault D41 1029 - Tensile strength Renault: Textiles, coated textiles and leathers - Tensile strength
Renault D42 1008/ D - Cold Brittleness Renault: Leather, Plastic or Rubber coated Textiles, Plastic sheets - Cold Brittleness
Renault D42 1235/ D - Impact strength (falling-weight method) Renault: Rubber and plastic parts - Impact strength (Falling weight method)
Renault D42 1775/ C - Resistance to scoring by abrasion Renault: Interior and exterior plastic parts - Resistance to scoring by abrasion
Renault D42 3109 / --- - Determination of volatile organic compounds (VOC) Renault, Vehicle passenger compartment materials, Evaluationof the quantity of volatile organic compounds (VOC) by thermodesorption/GC/MS
Renault D44 1221 - Resistance to scuffing Materials with brushed velour surface - Resistance to scuffing
Renault D44 1694 - Claw test Woven and knitted fabrics - Claw test
Renault D44 1900 - Resistance to marking Plastics - Resistance to marking (Resistance to scoring through polishing)
Renault D45 1010 - Colour fastness to rubbing Polymer materials and parts - Inside and outside passenger compartment - Colour fastness to rubbing
Renault D45 1012 - Determination of mass per unit Renault: Sheet materials - Surface mass
Renault D45 1014 - Number of threads or stitches Fabrics - Count Measurement
Renault D45 1195 - Determination of thickness and compressibility Renault: Felts and waddings - Thickness and compressibility
Renault D45 1197 - B - Separation Felts and paddings - Separation
Renault D45 1225 - Volatility of Additives Steering Wheels and Gear Knobs - Volatility of Additives
Renault D45 1291 (Shore D) - Evaluation of Shore D Hardness Rubbers and Plastics Shore Hardness A or D
Renault D45 1333 - Burning behaviour Materials inside passenger compartment - Horizontal flammability
Renault D45 1564 - Determination of dimension change Textiles - Dimensional variations in humidity
Renault D45 1601 - Volatility of additives Passenger compartment materials - Volatility of additives on surfaces
Renault D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) Interior trim materials and passenger compartment parts - Fogging F (reflectometric)
Renault D45 1727 (Fogging F) - Determination of the fogging characteristics (Fogging F) Interior trim materials and passenger compartment parts - Fogging F (reflectometric)
Renault D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) Renault: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging G)
Renault D45 1727 (Fogging G) - Determination of the fogging characteristics (Fogging G) Renault: Trim materials for interior and passenger compartment parts - Fogging - Condensation (Fogging G)
Renault D45 1817 - Soiling resistance Organic materials and coatings - Soiling resistance
Renault D45 1837 - Staining by test media Paint coatings on plastic parts and mass staining of colored materials by automotive fluids
Renault D45 2024 - Fatigue of stitching Textiles - Fatigue of stitching
Renault D45 5331/ B - Breaking angle at folding Renault: Trim composite materials - Tendency to form folds
Renault D47 1005 - Staining by water Lining materials - Staining by water
Renault D47 1020 (3.8.1 Water) - Resistance to water Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.1: Distilled water
Renault D47 1020 (3.8.2 sea water) - Resistance to sea water Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.2: Sea water
Renault D47 1020 (3.8.3 alkaline perspiration) - Resistance to alkaline perspiration Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.3: Basic perspiration
Renault D47 1020 (3.8.4 acid perspiration) - Resistance to acid perspiration Renault: Coverings & Parts in the passenger compartment - Colour resistance to water, sea-water and perspiration; §3.8.4: Acid perspiration
Renault D47 1022 - acid - Colourfastness to Perspiration Textiles - Colourfastness to perspiration (acid)
Renault D47 1022 - alkaline - Colourfastness to Perspiration Textiles - Colourfastness to perspiration (alkaline)
Renault D47 1122 - Colour fastness to artificial light Trim Materials - Colour fastness to artificial light at low temperature
Renault D47 1165 (climate storage) - Accelerated ageing Plastics and products applied to the body in white or coated in paint - Accelerated ageing - climate storge (constant climate)
Renault D47 1165 (heat storage) - Accelerated ageing Plastics and products applied to the body in white or coated in paint - Accelerated ageing - heat storage (constant temperature)
Renault D47 1234 - Heat resistance Renault: Parts containing plastic elements - Reaction to heat in a non-radiant dry oven
Renault D47 1309 - Climatic Cycle Test Automobile equipment trimming materials and parts - Ageing according to given climatic cycle
Renault D47 1431 - Colour fastness to artificial light Materials and passenger compartment parts - Behaviour of the appearance to artificial light at high and medium temperatures
Renault D47 5530/ B - Abrasion of leather by rubbing of seams Renault: Leathers - Abrasion of leather by rubbing the seams
Renault D49 1653, in accordance - Soiling and cleaning ability Trim Materials - Tendency to soiling and cleaning capacity
Renault D49 3001 - Odour test Given off odours - Internal equipment parts - Intensity evaluation and global odour characterisation
Renault D49 3027 - Determination of volatile organic emissions - chamber test Volatile organic components analysis produced by cabin parts (VOC)
Renault D49 3046 - Odour test Odour Emissions - Interior equipment parts - Measurement of the intensity and characterization of odour from parts in passenger compartment in climate chamber
Renault D51 1485 - Peeling at 90° Adhesive - Peeling at a right angle
Renault D51 3022 - Peeling (90 °) Interior Trim Materials - Right-Angle Peeling
Renault Nissan RNES B 20116 - Determination of the emissions of volatile organic compounds Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - micro-scale chamber method
Renault Nissan RNES-B-00070 (Fogging F) / (Renault D45 1727 / Nissan M0659) - Determination of the fogging characteristics (Fogging F) Renault Nissan: Interior trim materials and passenger compartment parts for automobiles - Fogging F (reflectometric)
Renault Nissan RNES-B-00070 (Fogging G) / (Renault D45 1727 / Nissan M0659) - Determination of the fogging characteristics (Fogging G) Renault Nissan: Interior trim materials and passenger compartment parts for automobiles - Fogging - Condensation (Fogging G)
Renault RT 1013 - Determination of thickness Thickness measurement - Materials in non-compressible sheets (e.g. plastic sheets, paper)
Renault RT 1045 - Determination of apparent density Cellular materials - Apparent density
Renault RT 1259 - Pulling of the loops Pulling of the loops - Textile carpets
Renault RT 1309 - Ageing by a given climatic cycle Trim materials and parts - Ageing by a given climatic cycle
Renault RT D41 1003 - Compressive strength Flexible alveolate materials for trimming - Compressive strength
Renault RT D41 1065 - Tensile strength after stitching without thread Textiles - Plastic coated textiles - Tensile strength after stitching without thread
Renault RT D41 1126 - Tearing strength Fabrics, plastified fabrics, plastic strips, carpets - Tearing
Renault RT D41 1127 - Resistance against the fraying at the seams Textiles - Resistance against the fraying at the seams
Renault RT D41 1142 - Tensile properties (threads) Measurement of strength and elongation to rupture - Threads, strings
Renault RT D42 1007 - Resistance to wrinkling Plastic coated textiles and lining material - Resistance to wrinkling
Renault RT D42 1047 - Dynamic fatigue (thickness loss, compression load deflection and compression set) Flexible Cellular Materials - Dynamic Fatique by Compression at Fixed Deformation
Renault RT D45 1046 - Determination of compression set Flexible cellular trim materials - Residual set after compression at a constant deformation thickness
Renault Trucks RT D27 1911 / A - Artificial ageing using weather-ometer Paint, rubber and plastic coatings - Artificial ageing using weather-ometer
Resistance of PVC film to amines Resistance of PVC film to amines
Resistance to care agents Resistance to care agents
Resistance to ozone Resistance to ozone
Resistance to test medium Resistance to test medium
Resistance under influence of temperature Resistance under influence of temperature
Retainer tensile test Retainer tensile test
Rivian RTS.0059 - Method A - Scratch resistance Testing method for scratch resistance of automotive plastics using an Erichsen Scratch Hardness Tester: Method A - Scratch resistance
Rotary abrasion test (Schopper) Schopper Abrasion; Resistance to wear (Schopper)
Rotting resistance Rotting resistance
Rust on the edges (based on DIN EN ISO 4628-1) - Evaluation degree of rusting Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (Edge rust)
SAE J 913 - Resistance against fluorescein Test method for wicking of automotive fabrics and fibrous materials
SAE J1326 - Colorfastness to water Test method for measuring wet color transfer characteristics
SAE J1351 - Odor test Hot odor test for insulation materials
SAE J1351 - Odor Test Hot Odor Test for Insulation Materials
SAE J1352-A - Compression and Recovery Compression and Recovery of insulation paddings - Method A
SAE J1389 - Corrosion test Corrosion test for insulation materials
SAE J1530 § 3 - Abrasion with the Taber abraser method Test method for determining resistance to fiber loss, resistance to abrasion and bearding of automotive carpet materials; § 3: Taber abraser method
SAE J1530 § 4 - Abrasion resistance Test method for determining resistance to fiber loss, resistance to abrasion and bearding of automotive carpet materials; § 4: Abrasion resistance
SAE J1545 § 4.6.1 - Color measurement (single angle) Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim § 4.6.1 Color Measuring Instrument for Single Illuminating/Viewing Geometry Measurements
SAE J1545 § 4.6.2 - Color measurement (multi-angle) Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim § 4.6.2 Color Measuring Instrument for Multi-Angle Measurements
SAE J1756 (Fogging F) - Determination of the fogging characteristics (Fogging F) Determination of the fogging characteristics of interior automotive materials, photometric procedure (Fogging F)
SAE J1756 (Fogging G) - Determination of the fogging characteristics (Fogging G) Determination of the fogging characteristics of interior automotive materials, gravimetric procedure (Fogging G)
SAE J1767 - Colour difference measurement Instrumental color difference measurements for colorfastness of automotive interior trim materials
SAE J1847 - Abrasion resistance (Taber abraser) Abrasion resistance testing - Vehicle exterior graphics and pin striping (Taber abraser)
SAE J1885 - Light fastness (Interior) Accelerated exposure of automotive interior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J1960 - Light fastness (Exterior) Accelerated exposure of automotive exterior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J2412 - Light fastness (Interior) Accelerated exposure of automotive interior trim components using a controlled irradiance water cooled Xenon-arc apparatus (replacement of SAE J1885)
SAE J2412 - Light fastness (Interior) Accelerated exposure of automotive interior trim components using a controlled irradiance water cooled Xenon-arc apparatus (replacement of SAE J1885)
SAE J2527 - Light fastness (Exterior) Accelerated exposure of automotive exterior materials using a controlled irradiance water-cooled Xenon arc apparatus
SAE J2635 - Filiform corrosion test Filiform corrosion test procedure for painted aluminum wheels and painted aluminum wheel trim
SAE J323-A - Cold cracking (Mandrel test) Test method for determining cold cracking of flexible plastic materials; Method A: Mandrel test
SAE J323-A - Cold cracking (Mandrel test) Test method for determining cold cracking of flexible plastic materials
SAE J365 - Resistance to scuffing Method of testing resistance to scuffing of trim materials
SAE J369 - Flammability Flammability of polymeric interior materials - Horizontal test method
SAE J400 - Chip resistance (gravelometer) Test for chip resistance of surface coating
SAE J855 - Static and permanent elongation Test method of stretch and set of textiles and plastics
SAE J860 - Determination Mass per unit area Surface Vehicle standard - Test Method for Measuring (Weight) of Organic Trim Materials
SAE J861 - Resistance to crocking Method of testing resistance to crocking of organic trim materials
SAE J882 - Determination of Thickness Test method for measuring thickness of automotive textiles and plastics
SAE J883 - Dimensional Stability Test method for determining dimensional stability of automotive textile materials
SAE J948 § 3 - Abrasion resistance by the abrasion wheel method Test method for determining resistance to abrasion of automotive bodycloth, vinyl, and leather, and the snagging of automotive bodycloth; § 3: Taber method
Sample preparation (carbon componets) Sample preparation (carbon componets)
Sample preparation (compression molding) Sample preparation (compression molding)
Sample preparation (cutting, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (cutting, E DIN ISO 23529) Rubber - General procedures for preparing and conditioning test pieces for physical test methods
Sample preparation (injection moulding) Sample preparation (injection moulding)
Sample preparation (manual) Sample preparation (manual)
Sample preparation (milling, DIN EN ISO 2818) Plastics - Preparation of test specimens by machining
Sample preparation (panel extrusion) Sample preparation (Panel extrusion)
Sample preparation (punching) Sample preparation (punching)
Sample preparation (punching, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Sample preparation (sawing, DIN EN ISO 2818) Plastics - Preparation of test specimens by machining
Sample preparation (splitting, DIN EN ISO 4661-1) Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1 : Physical tests
Saw cut test Saw cut test, e.g. VW TL 203, ASTM B 571
Scania STD 4377en - Scratch resistance Scratch resistance and scratch hardness
Scania TB4546 - Odour Smell - phenolic resin bonded material
Scanning electron microscopy
Scratch resistance (with thumbnail or knife blade) General method for determination of the scratch resistance (with thumbnail or knife blade)
Scratch test Scratch test (e.g. for PTL 5522, § 3.3.3; PTL 5536, § 5.4.1.3; VW TL 52447, § 2.2)
Scratch test with Erichsen hardness tester, model 318 - Scratch resistance Scratch resistance
Scratch test with Erichsen universal scratch tester - Scratch resistance / lattice cut Scratch test with Erichsen universal scratch tester
Scratch test with mar tester according to Oesterle Scratch resistance
Sealing / sealant removing Sealing / sealant removing
Seam Fatigue Test Seam Fatigue
Separation force (manual) Separation force (manual) - testing with hand load cell
Shift strength General method for determining the shift strength, e.g. Hyundai/KIA MS 300-32 § 4.10
SMG 7060Z-SMGA-E010-M1 / § 5.16 - Odor Characteristics Material and product characteristics of the roll-blind-sunshade for automobile; § 5.16: Odor characteristics
SMG 7060Z-SMGA-E010-M1 / § 5.4 - Colour fastness to light (89°C) Material and product characteristics of the roll-blind-sunshade for automobile; § 5.4: Light resistance (89 °C SST)
SMG 7060Z-SMGA-E010-M1 / § 5.9 - Water Spot Resistance Material and product characteristics of the roll-blind-sunshade for automobile; § 5.9: Water spot resistance
SN 195920 / SN 195921 - Agar diffusion plate test Textile fabrics - Determination of biologically active products (SN 19520), Determination of the antimycotic activity (SN 19521) - Agar diffusion plate test
SNV 195651 - Odor test Textiles - Determination of odor development of equipment (assessment)
Soda/Potash pulping Fusion procedure for following determination of anions/cations; soda/potash fusions
Soiling & cleanability behaviour textiles based on DBL 5399 Soiling & cleanability behaviour of textiles (based on DBL 5399.30)
Soiling and cleaning behavior (manually) Soiling and cleaning behavior (manually)
Soiling and cleaning behavior (Martindale) Soiling and cleaning behavior (Martindale)
Soluble contents from a watery extract Soluble contents from a watery extract
Specimen preparation; machined milling Specimen preparation; machined milling
St Andrews cross with adhesive tape pull-off St Andrews cross with adhesive tape pull-off
Static load (Shear tensile test) General test method - Static load freely suspended (Shear tensile test), e.g. BMW PR 380.4 issue 2015-09 § 2.2.5.2
Static solidity test (tensile test) general method - Static solidity test (tensile test) - component test
Steam jet test Steam jet test, e.g. for PTL 5524, VW 96172 § 7.6, PTL 5525, VW 96173 § 7.7, PTL 7520, VW 96208 § 5.12 / BMW PR 388 / BMW PR 387.1 / DBL 7381 / GMW 14797 table A1A
Storage in Autoclave Storage in Autoclave
Storage in sealant Storage in sealant
Storage in sealant remover Storage in sealant remover
Storage in test medium Storage in test medium
Storage in water Storage in water
Strength test (tensile test on the component) general test method - Strength test (tensile test on components)
Subaru TS-YKB-008 (Xenon light) - Weather resistance
Subaru TS-YKB-008 - Fogging (Method A) - Fogging (light transmission)
Sun simulation (Cycling test) Ageing of automobile components and vehicle in Solar Simulation Units (Cycling test)
Surface balancing Surface balancing
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2403 - Determination of volatile organic compounds Standard for control of volatile organic compounds emission
Suzuki SES N 2405 - Odour test Odor Sensory Evaluation
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3245 - Flammability Test method for flame-resistant interior materials and criteria for flame resistant property
Suzuki SES N 3247 § 4.17 - Seam strength Test method and quality criteria of leather for automobile seat; §4.17: Seam strength
Suzuki SES N 3247 § 4.18 - Seam fatigue Test method and quality criteria of leather for automobile seat; §4.18: Seam fatigue
Suzuki SES N 3247 § 4.6 - Crease-flex resistance Test method and quality criteria of leather for automobile seat; §4.6: Crease-flex resistance
Suzuki SES N 3253 - Corrosion test Test method of textile material parts corrosiveness - Corrosiveness test using a steel sheet
Suzuki SES N 3293/3292 (WAL-1) - Light fastness, interior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated light resistance test with carbon arc lamp (WAL-1)
Suzuki SES N 3293/3292 (WAL-1) - Light fastness, interior Plastic parts weatherability and light resistance judgment standard; Accelerated light resistance test judgment standard (WAL-1)
Suzuki SES N 3293/3292 (WAL-2) - Light fastness, interior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated light resistance test with xenon arc lamp (WAL-2)
Suzuki SES N 3293/3292 (WAL-2) - Light fastness, interior Plastic parts weatherability and light resistance judment standard - Accelerated light resistance test judgment standard
Suzuki SES N 3293/3292 (WAN-1) - Light fastness, exterior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated weatherability test with carbon arc lamp (WAN-1)
Suzuki SES N 3293/3292 (WAN-1) - Light fastness, exterior Plastic parts weatherability and light resistance judgment standard - Accelerated weatherability test judgment standard (WAN-1)
Suzuki SES N 3293/3292 (WAN-2) - Light fastness, exterior Evaluation criteria for weatherability and light resistance of plastic parts; Accelerated weatherability test with xenon arc lamp (WAN-2)
Suzuki SES N 3293/3292 (WAN-2) - Light fastness, exterior Plastic Parts weatherability and light resistance judgment standard - Accelerated weatherability test judgment standard (WAN-2)
Suzuki SES N 3294 § 5.10 - Abrasion resistance Test method of surface sheet material for automobile seats; § 5.10: Friction strength (Taber´s abrasion resistance test)
Suzuki SES N 3294 § 5.11 - Pilling resistance (ICI) Test method of surface sheet material for automobile seats; § 5.11: Pilling resistance (ICI type test method)
Suzuki SES N 3294 § 5.12 (JASO M 346) - Lightfastness Test method of surface sheet material for automobile seats; § 5.12: Color fastness to light
Suzuki SES N 3294 § 5.12 (SES N3292) - Lightfastness Test method of surface sheet material for automobile seats; § 5.12: Color fastness to light
Suzuki SES N 3294 § 5.15 - Mace Snag Test Test method of surface sheet material for automobile seats; § 5.15: Snag (ICI type mace testing method)
Suzuki SES N 3294 § 5.6 - Seam strength Test method of surface sheet material for automobile seats; § 5.6: Seam strength
Suzuki SES N 3294 § 5.7 - Seam Fatigue Test method of surface sheet material for automobile seats; § 5.7: Seam Fatigue
Suzuki SES N 3294 § 5.9 - Crumpling resistance Test method of surface sheet material for automobile seats; § 5.9: Crumpling resistance
Suzuki SES N 3298 § 4.11 - Stickiness Methods of testing PVC leather for seat skin § 4.11 Stickiness
Suzuki SES N 3298 § 4.12 - weight loss due to volatilization Methods of testing PVC leather for seat skin § 4.12 Loss by volatilization
Suzuki SES N 3298 § 4.16 - Anti-hydrogen-sulfide property Methods of testing PVC leather for seat skin; § 4.16: Hydrogen-sulfide property
Suzuki SES N 3298 § 4.22 - Seam strength Methods of testing PVC leather for seat skin; § 4.22 Seam strength
Suzuki SES N 3298 § 4.23 - Seam fatigue Methods of testing PVC leather for seat skin; § 4.23 Seam fatigue
Suzuki SES N 3298 § 4.9 - Color fastness to light Methods of testing PVC Leather for seat skin § 4.9 Color fastness to light
Taber abrasion wheel method - Abrasion resistance Abrasion by Taber abraser
Taiwan VSTD 19-1 (191) - § 19-1.5 horizontal test - Burning behaviour Vehicle safety tests - flammability of interior materials for motor vehicles
TD_G_CB_SOP_5.4_111_G_0 (GC-MS) - Determination of phthalates Determination of phthalates in solids with GC-MS
TD_G_CB_SOP_5.4_113_G_0 - Determination of amines Amines: Determination of organic substances by HPLC
TD_G_SUP_SOP_5.4_145_1_G_0 - Selected UV-stabilisators House method - Determination of stabilisators
Tearing force/ pulling force of bolts - Tensile test based on DIN EN ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites - Determination of the tearing force and pulling force of bolts
TEGEWA drop test Textile fabrics: Determination of the absorbency
Temperature cycling test Temperature cycling test (e.g. acc. to DBL 9202)
Temperature shock resistance Temperature shock resistance
Tensile Properties General method for tests on the Tensile Properties
Tesla Motors TP-0000702 - Scratch test Scratch Behavior of Polymeric Materials
Tesla Motors TP-0000703, Method A - Crocking Test Chemical Resistance of Surfaces, Method A - Crocking Test
Tesla Motors TP-0000703, Method B - Spot Test Chemical Resistance of Surfaces, Method B - Spot Test
Tesla TM-0000906 - Soiling and cleaning behavior (manually) Stain Resistance of Interior Surfaces
Tesla TP-0000706 - Module I - Alternating climate test Climatic aging of materials, components and assemblies - Module I - Dynamic climate endurance
Tesla TP-0000706 - Module II - Heat aging Climatic aging of materials, components and assemblies - Module II - Static heat aging
Thermal cycle with corrosion test Thermal cycle with corrosion test
Thermography Thermography - e.g. seats with seat heater
Thermogravimetry (TGA) / DIN EN ISO 11358 - Thermogravimetrical analysis (TGA) Plastics - Thermogravimetry (TGA) of polymers - General principles
Thickness measurement Thickness measurement of several matrices with caliper, thickness gauge or outside micrometer
Tight fit of mounting equipment General method - for determination the strength of mounting equipment
TJLR.52.161 - Resistance to acid spotting Jaguar cars & Land Rover: Resistance to acid spotting
Tolerance measurement Tolerance measurement
Toyota Boshoku BSDL2106 (Xenon lamp) - Colorfastness to light Standard test methods for seat fabrics with regard to items concerning the natural environment - Xenon Lamp (methods B, E)
Toyota Boshoku BSDL5100 § 4.19.2 - Color fastness to light (xenon lamp) General test methods for artificial leather - § 4.19.2 Method B: Xenon Lamp
Toyota Boshoku BSDM6716 § 4.8.2 (Method B) - Hardness (indentation force) Polyurethane form matreials for safety pads, § 4.8.2 Hardness test - Method B
Toyota BSDM 0500 - Burning behaviour Flammability test method for interior non-metallic materials
Toyota BSDM 0503 - B (gravimetric) - Fogging test Fogging test method for non-metallic materials - Method B (gravimetrical)
Toyota BSDM 0503 - B (reflectrometric) - Fogging test Fogging test method for non-metallic materials - Method B ( reflectrometrical)
Toyota BSDM 0505 § 9.1.1 - Odor test (without water, initial smell) Smell quality of non-metallic materials; § 9.1.1: without water, initial smell
Toyota BSDM 0505 § 9.1.2 - Odor test (without water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials, § 9.1.2: without water, after ageing 96 h / 80 °C
Toyota BSDM 0505 § 9.2.1 - Odor test (with water, initial smell) Smell quality of non-metallic materials, § 9.2.1: with water, initial smell
Toyota BSDM 0505 § 9.2.2 - Odor test (with water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials § 9.2.2: with water, after ageing 96 h / 80°C
Toyota BSDM 0505 § 9.3 Water extraction - Odor test (water extraction) Smell quality of non-metallic materials § 9.3 smell water extraction test for single parts
Toyota BSDM 0508 - Determination of volatile compounds Volatile component measurement method using sampling bag, Emissions
Toyota PPS 5004 - Rigidity test Textile flex resistance - carpeted floor mats rigidity test
Toyota TIS 01204-00635 § 5.12.1 (FOM / Xenonbogen) - Accelerated light resistance (for interior parts) Canvas top, Top Cover Canvas; § 5.12.1 - Accelerated light resistance (for interior parts)
Toyota TIS 01204-00635 § 5.12.1 (WOM / Xenon) - Toyota TIS 01204-00635 § 5.12.1 (WOM / Xenon) Canvas top, Top Cover Canvas; § 5.12.1 - Accelerated weather resistance (for exterior parts)
Toyota TIS 01204-00635 § 5.13 - Tack free test Canvas top, Top Cover Canvas; § 5.13: Tack free test
Toyota TIS 01204-00635 § 5.15.4.1 - Odor test (without water, initial smell) Odor test for Canvas top, Top Cover Canvas; § 5.15.4.1: without water, initial smell
Toyota TIS 01204-00635 § 5.15.4.2 - Odor test (without water, after ageing 96 h / 80 °C) Odor test for Canvas top, Top Cover Canvas; § 5.15.4.2:
Toyota TIS 01204-00635 § 5.15.5.1 - Odor test (with water, initial smell) Odor test for Canvas top, Top Cover Canvas; § 5.15.5.1:
Toyota TIS 01204-00635 § 5.15.5.2 - Odor test (with water, after ageing 96 h / 80 °C) Odor test for Canvas top, Top Cover Canvas; § 5.15.5.2: with water, after ageing 96 h / 80 °C
Toyota TSH 1501 G § 2.1 Method A - Print resistance of paint film (Gauze print method) Test method for print resistance of paint film; § 2.1: Method A (Gauze print method)
Toyota TSH 1503 G § 2.1 - Cross-cut test Test method for adhesive property of paint film; § 2.1: Crosscut method
Toyota TSH 1503 G § 2.1 - Cross-cut test Test method for adhesive property of paint film; § 2.1 Crosscut Method
Toyota TSH 1503 G § 2.2 - X-cut test Test method for adhesive property of paint film; § 2.1: X-cut method
Toyota TSH 1503 G § 2.2 - X-cut test Test method for adhesive property of paint film; § 2.1: X-cut method
Toyota TSH 1504 G § 2.2.1 - Bending test, Manual method Test method for flexibility of paint film; § 2.2.1: Bending test, Manual method
Toyota TSH 1508 G § 2.1.2 (Method B) - Resistance to solvents Test methods for the solvent resistance of the paint layer § 2.1.2 Method B
Toyota TSH 1519 G § 3 - Gloss measurement Test method for gloss of paint film; § 3: Specular Gloss (Reflectometer)
Toyota TSH 1539 G § 2.1 - Pencil scratch hardness Test method for hardness of paint film; § 2.1: Pencil scratch hardness
Toyota TSH 1539 G § 2.1 - Pencil scratch hardness Test method for hardness of paint film; § 2.1 Pencil Scratch Hardness
Toyota TSH 1555 G - Corrosion test Test method for accelerated corrosion under complex environment
Toyota TSH 1562G § 3.1 - Grease staining resistance (Gakushin) Grease staining resistance test method for interior parts paint, § 3.1 Beef tallow method
Toyota TSH 1562G § 3.2 - Grease staining resistance (Gakushin) Grease staining resistance test method for interior parts paint, § 3.2 Hair liquid method
Toyota TSH 1562G § 3.3 - Grease staining resistance (Gakushin) Grease staining resistance test method for interior parts paint, § 3.3 Sun-block cream method
Toyota TSH 1564 G - Method B (reflectometric procedure) - Fogging Characteristics Fogging test method for interior painted parts - Method B, reflectometric procedure
Toyota TSH 1564 G -Methode B gravimetric measurement - Fogging Characteristics Fogging test method for interior painted parts - Method B, gravimetric procedure
Toyota TSH 3130 G § 4.17 (Carbon arc) - Light fastness (Carbon arc, Fade-O-Meter) Paint quality for interior parts - Accelerated ligth resistance - (1) Carbon arc method
Toyota TSH 3130 G § 4.19 (Carbon arc) - Light fastness (Carbon arc, Fade-O-Meter) Paint quality for interior parts § 4.19 Accelerated ligth resistance - (1) Carbon arc method
Toyota TSH 3130 G § 4.19 (Xenon lamp) - Light fastness (Xenon lamp method) Paint quality for interior parts § 4.19 Accelerated ligth resistance (2) Xenon lamp method
Toyota TSL 0601 G (Carbon arc) - Light resistance (Method A, Fadeometer) Criteria for test for quality of color change by aging § 5.1 Method A Ultraviolet Carbon Arc Fadeometer
Toyota TSL 0601 G (Xenon arc) - Light resistance (Method B) Criteria for test for quality of color change by aging (method B)
Toyota TSL 0601 G § 5.5 (Xenon arc) - Light resistance (Method E) Criteria for test for quality of color change by aging, method E
Toyota TSL 1600 G § 4.1 - Determination of linear density (conditioned size) Specification for polyester threads for seat sewing; § 4.1: Conditioned size (Yarn count)
Toyota TSL 1600 G § 4.2 - Tensile properties Specification for polyester threads for seat sewing; § 4.2: Tensile strength and elongation
Toyota TSL 1600 G § 4.2 - Tensile properties yarn Specification for polyester threads for seat sewing § 4.2 Tensile strength and elongation
Toyota TSL 1600 G § 4.3.1 (Method A) - Color fastness and ageing Specification for polyester threads for seat sewing; § 4.3.1: Color fastness and ageing
Toyota TSL 1600 G § 4.3.1 (Method A) - Color fastness to light Specification for polyester threads for seat sewing § 4.3.1 Test on colorfastness to light Method A Xenon Lamp
Toyota TSL 1600 G § 4.4 (Method B) - Colour fastness to crocking Specification for polyester threads for seat sewing; § 4.4: Color fastness to crocking (method B), dry and with perspiration solution
Toyota TSL 1600 G § 4.5 - Loop strength test Specification for polyester threads for seat sewing; § 4.5: Loop strength test
Toyota TSL 1600 G § 4.6 - Stretch elasticity test Specification for polyester threads for seat sewing; § 4.6: Stretch elasticity test
Toyota TSL 2100 G § 4.18 - Taber Abrasion (Wear resistance) Standard test methods for woven fabrics and knitted fabrics; § 4.18: Taber Abrasion
Toyota TSL 2106 G § 4.8.2 (Method B) - Colour fastness to light Standard test methods for seat fabrics; § 4.8.2: Colorfastness to light at high temperature - Method B: Xenon Lamp (Atlas Ci35W or equivalent)
Toyota TSL 3600 G § 7.13.2 (Method B) - Colour fastness to dry crocking Test methods for carpet materials for automobiles; § 7.13.2: Color fastness to dry crocking (method B)
Toyota TSL 3600 G § 7.2 - Thickness Test methods for carpet materials for automobiles; § 7.2: Thickness
Toyota TSL 3600 G § 7.3 - Grab tensile properties Test methods for carpet materials for automobiles; § 7.3: Tensile strength - Determination of maximum force using the grab method
Toyota TSL 3600 G § 7.4 - Tear strength Test methods for carpet materials for automobiles; § 7.4: Tear strength - by the Tongue (single rip) procedure
Toyota TSL 5100 G § 4.10 - Tack free test General test methods for vinyl leathers; § 4.10: Tack free test
Toyota TSL 5100 G § 4.19.2 (Method B: Xenon Lamp) - Light fastness High-temperature light fastness test
Toyota TSL 5101 G § 3.7 - Seam fatigue test § 3.7: Seam fatigue test
Toyota TSL 5102G § 4 - Creaking noise, method B Evaluation method of creaking noise between interior materials, § 4. Noise reproduction bench test method B
Toyota TSL5101G & 3.29 - Crease-Flex Resistance Crease-Flex Resistance Test
Toyota TSM 0500 G - Burning behaviour Flammability test method for interior non-metallic materials
Toyota TSM 0500 G - Burning behaviour Flammability test method for interior materials
Toyota TSM 0501 G § 9.1.2 - Specific gravity measurement (pycnometer method) Standard test methods for plastic molding materials, § 9.1.2 Pycnometer Method
Toyota TSM 0501 G § 9.10 - Melt mass-flow rate (MFR) Standard test methods for plastic molding materials § 9.10 Melt index measurement test
Toyota TSM 0501 G § 9.20 (FOM / Carbon arc) - Accelerated weather resistance test with carbon arc exposure (Fade-O-Meter, FOM) Standard test methods for plastic molding materials; § 9.20: Accelerated weather resistance test (light resistance) - table 37 - SFade-O-Meter FOM (cabon arc lamp)
Toyota TSM 0501 G § 9.20 (FOM / Xenon) - Light resistance (for interior parts) Standard test methods for plastic molding materials; § 9.20: Accelerated light resistance
Toyota TSM 0501 G § 9.20 (SWOM / Carbon Arc Lamp) - Accelerated weather resistance test - Sunshine weather O-meter (SWOM) Standard test methods for plastic molding materials; § 9.20: Accelerated weather resistance test (light resistance) - table 37 - Sunshine Weather Ometer SWOM (cabon arc lamp)
Toyota TSM 0501 G § 9.20 (WOM / Xenon) - Accelerated weather resistance test (for exterior parts) Standard test methods for plastic molding materials; § 9.20: Accelerated weather resistance test
Toyota TSM 0501 G § 9.22 - Paint film adhesion (cross cut test) Standard test methods for plastic molding materials § 9.22 Paint film adhesion measurement test
Toyota TSM 0501 G § 9.23 - Adhesive strength (electro-plated surface) Standard test methods for plastic molding materials § 9.23 Electro-plated surface adhesion strength measurement test
Toyota TSM 0501 G § 9.4.1 - Determination of Izod impact resistance (notched) Standard test methods for plastic molding materials § 9.4.1 Izod impact test (notched)
Toyota TSM 0501 G § 9.4.1 - Determination of Izod impact resistance (notchless) Standard test methods for plastic molding materials § 9.4.1 Izod impact test (notchless)
Toyota TSM 0501 G § 9.4.2 - Determination of Charpy impact resistance (notched) Standard test methods for plastic molding materials § 9.4.2 Charpy impact test (notched)
Toyota TSM 0501 G § 9.4.2 - Determination of Charpy impact resistance (notchless) Standard test methods for plastic molding materials § 9.4.2 Charpy impact test (notchless)
Toyota TSM 0501 G § 9.8 - Vicat softening temperature Standard test methods for plastic molding materials § 9.8 Vicat softening point measurement test
Toyota TSM 0501 G § 9.9.2 (Shore A) - Determination of Shore A hardness Standard test methods for plastic molding materials § 9.9.2 Shore A hardness measurement
Toyota TSM 0501 G § 9.9.2 (Shore D) - Determination of Shore D hardness Standard test methods for plastic molding materials § 9.9.2 Shore D hardness measurement
Toyota TSM 0501G § 9.12 - Injection moulding of test specimens of thermoplastic materials (Determination of moulding shrinkage) Standard test methods for plastic molding materials § 9.12 Molding shrinkage measurement test
Toyota TSM 0502G § 4.1.1 (Method B / Condition B) - Heat storage with infrared radiation General test method regarding material properties for plastic parts, § 4.1.1 Method B
Toyota TSM 0503 G - (reflectometric) - Fogging test Fogging test method for non-metallic materials - B (reflectometric)
Toyota TSM 0503 G - A (transmittance) - Fogging (light transmission) Fogging test method for non-metallic materials - A (transmittance)
Toyota TSM 0503 G - B (gravimetric) - Fogging test Fogging test method for non-metallic materials; § 3.2.2b: Fogging G (method B, gravimetrical)
Toyota TSM 0503 G - B (gravimetric) - Fogging test Fogging test method for non-metallic materials - Method B (gravimetric)
Toyota TSM 0503 G - B (gravimetric) - Fogging test Fogging test method for non-metallic materials - B (gravimetric)
Toyota TSM 0503 G - B (reflectometric) - Fogging test Fogging test method for non-metallic materials; § 3.2.2a: Fogging F (method B, reflectometric)
Toyota TSM 0503 G - B (reflectometric) - Fogging test Fogging test method for non-metallic materials - Method B (reflectometric)
Toyota TSM 0505 G § 8.1.1 - Odor test (without water, initial smell) Smell quality of non-metallic materials; § 8.1.1: without water, initial smell
Toyota TSM 0505 G § 8.1.2 - Odor test (without water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials; § 8.1.2: without water, after ageing 96 h / 80 °C
Toyota TSM 0505 G § 8.2.1 - Odor test (with water, initial smell) Smell quality of non-metallic materials; § 8.2.1: with water, initial smell
Toyota TSM 0505 G § 8.2.2 - Odor test (with water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials; § 8.2.2: with water, after ageing 96 h / 80 °C
Toyota TSM 0505 G § 8.3 Water extraction - Odour test Toyota, Smell quality of non-metallic materials Point 8.3 smell water extraction test for single parts
Toyota TSM 0505 G § 9.1.1 - Odor test (without water, initial smell) Smell quality of non-metallic materials § 9.1.1 without water, initial smell
Toyota TSM 0505 G § 9.1.2 - Odor test (without water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials § 9.1.2 without water, after ageing 96 h / 80 °C
Toyota TSM 0505 G § 9.2.1 - Odor test (with water, initial smell) Smell quality of non-metallic materials § 9.2.1 with water, initial smell
Toyota TSM 0505 G § 9.2.2 - Odor test (with water, after ageing 96 h / 80 °C) Smell quality of non-metallic materials § 9.2.2 with water, after ageing 96 h / 80 °C
Toyota TSM 0505 G § 9.3 Water extraction - Odor test Smell quality of non-metallic materials § 9.3 water extraction
Toyota TSM 0506G - Determination of temperature of deflection under load Standard test methods for plastic molding materials for compliance with iso
Toyota TSM 0506G § 3.3 (Charpy impact) - Determination of Charpy impact properties at low temperatures Standard Test Methods for Plastic Molding Materials for Compliance with ISO
Toyota TSM 0508 G - Determination of volatile components Volatile component measurement method using sampling bag, Emissions
Toyota TSM 0509 G - Analysis of emissions of volatile substances by heat extraction and gaschromatography Test method for measuring volatile substances under heat desorption method (based on VDA 278)
Toyota TSM 7100G § 4.2.1 - Hardness (indentation force) Testing cellular material; hardness test on polyurethan foam; (Indentation force at default indentation distance)
Toyota TSM 7100G § 4.3 - Compression load test Testing of cellular material; Compression load test on polyurethane foam; (Veränderung der Elastizität nach mehrmaliger Belastung)
Toyota TSM 7100G § 4.4 - Stress relaxation test Test foams; Compression stress relaxation test of polyurethane foams
Toyota TSM0501G § 9.2 - Tensile Test Standard test methods for plastic molding materials - § 9.2 Tensile Test
Toyota TSM0501G § 9.3 - Bending Test Standard test methods for plastic molding materials - § 9.3 Bending Test (Three-point Bending Test)
Toyota TSM6634G § 5.7.1 and § 5.7.2 - Colorfastness to crocking Colorfastness to crocking (dry/wet) by using the Gakushin-type friction tester
Traction-Adhesive Strength Test
TRIAS 20-J027-01 - Burning test Test for Flame-Resistance Interior Materials
TSKF TS420-0-02 - Burning behavior Flammability test method
TSKF TS420-0-32 Method A - Fogging test (reflectometric) Test method & Quality standard for the fogging property
TSKF TS420-00-033 - Determination of VOC's from interior components The VOC emission test method
UL 94 HB - Burning behaviour - horizontal UL Standard for Safety Test for Flammability of plastic materials for parts in devices and appliances - horizontal burning test
UL 94 V - Burning behaviour - vertical UL Standard for Safety Test for Flammability of plastic materials for parts in devices and appliances - vertical burning test
US-EPA 8260 B - Determination of volatile organic compounds Volatile organic compounds by gas chromatography/ mass spectrometry
Vacuum drying Vacuum drying
VDA 230-205 Method A - Determination of the loose-grained effect Leather for Automobile interior trim - Determination of the lose-grained effect of unlaminated leather - Method A
VDA 230-205 Method B - Determination of the loose-grain effect Leather for Automobile interior trim - Determination of the lose-grained effect of laminated leather
VDA 230-206 Part 1 - Stick-slip behaviour Examination of the stick-slip behaviour of material pairs - Part 1 General section
VDA 230-206 Part 2 - Stick-slip behaviour (Leather) Examination of the stick-slip behaviour of material pairs - Part 2 Leather
VDA 230-206 Part 3 - Stick-slip-behavior (plastic web) Examination of the stick-slip-behavior of testing of material pairs - Part 3: Plastic web
VDA 230-208 - Hydrolytic resistance Leather and plastic roll stock for motor vehicle interior trim - Hydrolytic aging (aging in desiccator or preserving jar)
VDA 230-209 - Flexural properties Leather, plastic roll stock and textiles for motor vehicle - Determination of flexural properties
VDA 230-210 - Hook and loop fastener test Upholstery fabric - Hook and loop fastener test
VDA 230-211 - Abrasion Test Abrasion Test on Leather - Determination of the abrasion resistance of leather surfaces using the Martindale abrasion testing apparatus and a ball plate
VDA 230-212 (Daimler MBN 55555-3 § 5.2) - Soiling and cleanability (modified Martindale method) Leather, plastic roll stock and textiles for use in vehicles - Determining the soiling and cleaning properties process - procedure soiled fabric: test conditions acc. to Daimler MBN 55555-3 § 5.2 (table 3 and 5)
VDA 230-212 - Soiling and cleanability (modified Martindale method) Leather, plastic roll stock and textiles for use in vehicles - Determining the soiling and cleaning properties process - procedure soiled fabric
VDA 230-217 (Method B) - Ball impact test Plastic Roll Goods for Motor Vehicel Interior Trim - Test of Low Temperature Resistance; Method B: Ball impact test
VDA 230-218 - Scratch resistance with a chisel Plastic sheet products for automobile interior trim - testing the scratch resistance - plowing
VDA 230-219-D - Sun simulation (long term testing) Ageing of automotive components in solar simulation units (long term testing)
VDA 230-219-Z - sun simulation (cycle testing) Ageing of automotive components in solar simulation units (cycle testing)
VDA 230-220 test with seam in the middle - Mace Snag Test Textiles for the automotive interiors - Determining the thread puller tendency of textiles - Mace Snag test; § 8.1: Test without test seam in the middle
VDA 230-220 test without seam in the middle - Mace Snag Test Textiles for the automotive interiors - Determining the thread puller tendency of textiles - Mace Snag test; § 8.1: Test without test seam in the middle
VDA 230-223 - Compatibility with Amines Plastic sheets for automotive interior trim - Compatibility with amines
VDA 230-225 § 5.2.3 / 6 - Exposure against fat or oil Plastic Roll Goods for Motor Vehicle Interior Trim - Crack resistance of upholstery fabrics - Requirements and methods of test, § 5.2.3 / 6 Exposure against fat or oil
VDA 233-102 - Corrosion testing Cyclic corrosion testing of materials and components in automotive construction
VDA 237-101 (appendix 1) - Handle impression distance measurement Test procedures for foils and artificial leather; Appendix 1: Grip indentation measurement
VDA 237-101 (appendix 3) - Ball drop test Test procedures for foils and artificial leather; Appendix 3: Ball drop test
VDA 270 (Variant 1) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 1)
VDA 270 (Variant 1) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 1)
VDA 270 (Variant 2) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 2)
VDA 270 (Variant 2) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 2)
VDA 270 (Variant 3) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 3)
VDA 270 (Variant 3) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (variant 3)
VDA 270 (Variant 4 - leather, with water) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (Variant 4)
VDA 270 (Variant 5 - leather, without water) - Odour test Determination of the odour characteristics of trim materials in motor vehicles (Variant 5)
VDA 270 / acc. to DBL 5430 Appendix A - for leather - Odour test Determination of the odour characteristics of trim materials in motor vehicles - according to DBL 5430 Appendix A - Supplement to VDA 270 - for leather
VDA 275 (HPLC) - Determination of the emission of selected analytes by the flask method Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method; measurement with HPLC
VDA 275 - Determination of formaldehyde emission Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method
VDA 276-1 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet; Teil 1: Standard emission test
VDA 276-2 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet; Part 2: Determination of emissions of Formaldehyde, ammonia and phenols after the equilibrium concentration method
VDA 276-3 - Determination of organic substances Determination of organic substances as emitted from automotive interior products using a 1 m³ test cabinet; Part 3: Determination of total concentration of hydrocarbon compounds with a flame ionization detector (FID)
VDA 277-MS/FID - Determination of volatile organic compounds (TVOC with GC-MS/FID) Non-metallic materials for automotive interior trim - Determination of emissions of volatile organic compounds (TVOC-MS)
VDA 278 (BMW) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC and FOG-determination TDS-GC-MS screening)
VDA 278 (Daimler) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (TDS-GC-MSD (2x VOC- + Fog-values))
VDA 278 (Porsche) - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (emission measurement using TDS-GC-MSD)
VDA 278 - Organic emissions using thermal desorption-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles
VDA 278, based on (development) - Organic substances and their emissions with TDS-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC- and FOG-Determination TDS-GC-MS-Screening)
VDA 278, based on - Organic substances and their emissions with TDS-GC-MSD Thermal desorption analysis of organic emissions for the characterization of non-metallic materials for automobiles (VOC- and FOG-Determination TDS-GC-MS-Screening)
VDA 280-1 - Colour measuring of plastic surfaces Colorimetry for motor vehicles - Colour measuring of plastic surfaces of interior materials for motor vehicles
VDA 280-2 - Colour measuring of textiles Colorimetry for motor vehicles - Colour measuring of textiles
VDA 280-3 - Color measurement of automotive finishes, uni-paint Colorimetry for motor vehicles - Color measurement of automotive finishes, uni-paint
VDA 621-402 - Salt spray fog test Technical paint tests - Salt spray test on paints and similar coatings
VDA 621-408 - Colour changes by simulated oil-soot exposure Technical paint tests - Examination of paints to colour changes by simulated oil-soot exposure
VDA 621-412 - Resistance to chemicals Technical paint tests - Chemical restistance of motor vehicle painting
VDA 621-415 - Corrosion test Technical paint tests - Examination of the corrosion protection of automotive coatings in cyclic alternating stress
VDA 621-424 (dry) - Abrasion resistance (dry) Technical paint tests - Abrasion resistance of coatings on plastics of motor vehicle interior trim (dry)
VDA 621-424 (test media, BMW) - Abrasion resistance (test media, BMW) Technical paint tests - Abrasion resistance of coatings on plastics of motor vehicle interior trim (test media, BMW)
VDA 621-427 - Stone chip resistance Stone impact resistance
VDA 675-106 (DIN 53479-A) - Determination of density Elastomer components in automotive - Test methods for identification - Density (immersion method; DIN 53 497, Procedure A)
VDA 675-116 - Differential scanning calorimetry (DSC) Elastomer components in automotive - Test methods for identification - Coldness characteristics, differential scanning calorimetry (DSC)
VDA 675-125 - Determination of extractable components Elastomer components in automotive - Test methods for identification - Extractable components, extraction with Cyclohexane/Acetone
VDA 675-130 (950°C) - Determination of the ash content Elastomer components in automotive - Test methods for identification - Ash content without chemical treatment (950 °C)
VDA 675-135 - Thermogravimetrical analysis (TGA) Elastomer components in automotive - Test methods for identification - Thermogravimetry, TGA
VDA 675-140 - Pyrolysis IR Elastomer components in automotive - Test methods for identification - Infrared spectroscopy analysis (IR), pyrolysis-IR
VDA 675-202 (Shore A) - Determination of Shore A hardness Elastomer components in automotive - Test methods for determination of characteristics - Shore A, refers to DIN 53505
VDA 675-205 - Tensile properties Elastomer components in automotive - Test methods for determination of characteristics - Tensile stress-strain properties - Tensile test
VDA 675-210 (DIN 53515) - Tear strength test (according to Graves) Elastomer components in automotive - Test methods for property determination - Tensile stress-strain properties - Tear strength (Graves), refers to DIN 53 515
VDA 675-211 (DIN 53507) - Tear strength test (strip specimen) Elastomer components in automotive - Test methods for property determination - Tensile stress-strain properties - Tear strength test (strip specimen), refers to DIN 53 507
VDA 675-216-A - Compression set (Method A: cooling in non-deformed state) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Compression set; Method A
VDA 675-216-B - Compression set (Method B: cooling in deformed state) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Compression set; Method B
VDA 675-217-A - Tension set (Method A: release directly after heat storage, return measurement after 30 min) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Tension set; Method A
VDA 675-217-B - Tension set (Method B: release 30 to 120 min after heat storage, return measurement after 30 min) Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Tension set; Method B
VDA 675-218 - Determination of the plastic and elastic deformation Elastomer components in automotive - Test methods for determination of characteristics - Creep and relaxation - Plastic und elastic deformation (permanent deformation)
VDA 675-241 - Corrosion effect on copper Elastomer components in automotive - Test methods for determination of characteristics - Corrosion effect on copper
VDA 675-242-A - Paint indifference, method A: contact discoloration and environment discoloration due to migration Elastomer components in automotive - Test methods for determination of characteristics - Discolouration of organic materials by means of elastomers (Lacquer indifference), method A: contact discolouration and discolouration due to migration
VDA 675-242-B - Paint indifference, method B: washout effect Elastomer components in automotive - Test methods for determination of characteristics - Discolouration of organic materials by elastomers (lacquer indifference), method B: wash-out effect
VDA 675-301 - Exposure to test oils Elastomer components in automotive - Test method for durability test - Exposure to test oils
VDA 675-310 - Heat ageing Elastomer components in automotive - Test method for durability test - Heat ageing
VDA 675-310 - Heat aging - Heat aging Elastomer - Resistance - Heat aging
VDA 675-311 (DIN 53509-1) - Ozon resistance after 20 % elongation Elastomer components in automotive - Test method for durability test - Effect of ozon (following DIN 53 509)
VDA 75202 (based on, BST 90 °C) - Colour fastness and ageing behaviour to light Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Based on: BST 90 °C
VDA 75202-A - Colour fastness and ageing behaviour to light (100 °C) Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Exposure condition A: 100 °C
VDA 75202-B - Colour fastness and ageing behaviour to light (115 °C) Automotive interior trim materials - Colour fastness and ageing behaviour to light at high temperatures - Xenon arc lamp test; Exposure condition A: 115 °C
VDA Band 19.1 / DBL 6516 - Contamination Analysis Testing of technical cleanliness - particle contamination of functionally relevant automotive parts
VDI 2019 - Adhesion of thermoplastic elastomers (TPE) on substrates Testing the adhesion of thermoplastic elastomers (TPE) on substrates
VDI 2464 / VDI 4300-2 / VDI 4300-4 / VDI 4301-3 - Sampling for PCB & PCP Sampling for PCB & PCP / lindane, indoor air; Ambient air measurement - Measurement of indoor air - Determination of polychlorinated biphenyls (PCBs), GC / MS method for PCB 28, 52, 101.138, 153, 180 / Measurement of indoor air pollution - Measurement strategy for polycyclic aromatic hydrocarbon
VDI 2464 Bl.1 - Measurement of polychlorinated biphenyls (PCBs) Ambient air measurement - Indoor air measurement - Measurement of polychlorinated biphenyls (PCBs) - GC/MS method for PCB 28, 52, 101, 138, 153, 180; Deviation to the Standard: GC-ECD instead of MSD
VDI 2467 Part 2 - Determination of amines Gaseous air pollution measurement - Measurement of the concentration of primary and secondary aliphatic amines by high-performance liquid chromatography (HPLC)
VDI 3865 paper 3 - Determination of volatile organic compounds Measurement of organic soil pollutants - GC determination of volatile organic compounds in soil gas - Adsorption on activated charcoal and desorption with organic solvent
VDI 4300-8 - Sampling of house dust Measurement of indoor air pollution - Sampling of house dust
VDI 4301-2 - Measurement of PCP and lindane with GC/MS Measurement of indoor air pollution - Measurement of pentachlorophenol (PCP) and y-hexachlorocyclohexane (lindane) - GC/MS method
VdL-RL 03 § 4.2 - Determination of the total formaldehyde concentration Guideline for the determination of the formaldehyde concentration in water based emulsion paints and related products; § 4.2: Determination of the total in-can-formaldehyde concentration with acidic steam distillation
VinFast VFDST00032302 - Finger nail test Finger nail test - Surface test of motor vehicle interior materials
VinFast VFDST00032304 Procedure A - Color abrasion behavior (Abrex) Color abrasion behavior - Surface test of motor vehicle interior materials - Procedure A
VinFast VFDST00032304 Procedure B - Color abrasion behavior (Crockmeter) Color abrasion behavior - Surface test of motor vehicle interior materials - Procedure B
VinFast VFDST00032304 Procedure C - Color abrasion behavior (Veslic) Color abrasion behavior - Surface test of motor vehicle interior materials - Procedure C
VinFast VFDST00032305 Procedure A - Resistance to cleaning agents Resistance to cleaning and maintenance agents -Surface test of motor vehicle interior materials - Procedure A
VinFast VFDST00032305 Procedure B - Resistance to cleaning agents Resistance to cleaning and maintenance agents - Surface test of motor vehicle interior materials - Procedure B
VinFast VFDST00032305 Procedure C - Resistance to cleaning agents Resistance to cleaning and maintenance agents - Surface test of motor vehicle interior materials - Procedure C
VinFast VFDST00032306 Procedure A - Soiling behavior and cleaning ability Soiling behavior and cleaning ability - Surface test of motor vehicle interior materials - Procedure A
VinFast VFDST00032306 Procedure B - Soiling behavior and cleaning ability Soiling behavior and cleaning ability - Surface test of motor vehicle interior materials - Procedure B
VinFast VFDST00032600 - Burning behaviour Determination of burning behavior to automotive interior trim materials
VinFast VFDST00053800 Part a - Solar simulation Solar simulation for trim parts - part a
VinFast VFDST00053800 Part b - Solar simulation Solar simulation for trim parts - part b
VinFast VFDST00053800 Part C - Solar simulation (behind horizontal glass pane) Solar simulation of trim parts
VinFast VFDST00069400 - Soiling behavior and cleaning ability Soiling behavior and cleaning ability of surface materials
VOC46505 LABKO - VOC emission Standard for Control of Volatile Organic Compounds Emission
Volov VCS 1026,52759 - Gloss measurement (60°) Gloss of interior and non-body coloured exterior materials
Volvo - Scratch test with Erichsen universal scratch tester 430 P-III - Scratch resistance General method - Volvo - Scratch test with Erichsen universal scratch tester 430 P-III, e.g. to Volvo NOTE-TR 33715250 - REQ 5991v4 / Volvo NOTE-TR 33715368 - REQ 5991v4
Volvo 85 000 140 - Alt 1 - Sun simulation leather Quick; UV/moisture for leather
Volvo 85 000 140 - Alt 1 / DIN EN ISO 4892-2 (Method - BPT 65 °C) - Artificial weathering leather UV/moisture for leather - Alt 2
Volvo APM-0001/1 (woven & knitted fabrics) - Soiling and cleanability Soiling and cleanability of interior materials
Volvo APM-0001/1 - Soiling and cleanability Soiling and cleanability of interior materials
Volvo Compression set general method - Volvo Compression set for laminated upholstery material
Volvo fingerprint test - Fingerprint removal Fingerprint removal on high gloss surfaces
Volvo NOTE-TREG 33418235 § 4.8.9.10 - Scratch resistance Volvo NOTE-TREG 33418235 Door trims § 4.8.9.10 Scratch resistance valid interior Polypropylene parts
Volvo STD 1023,7114 - Odour indication Odour indication - phenolic resin
Volvo STD 1024,1116 - Determination of compression set Compression set - Rubber material
Volvo STD 1024,2111 - Tensile properties Tensile strenght - Plastics
Volvo STD 1024,2112 - Tensile properties Tensile strength and break elongation - Plastics
Volvo STD 1024,2843-A - Peeling strength (method A) Peeling strength - Laminated materials (method A: with testing machine)
Volvo STD 1024,2843-B - Peeling strength (method B) Peeling strength - Laminated materials (method B: with weights)
Volvo STD 1024,3113 - Scratch resistance with an Erichsen hardness tester Scratch resistance (with an Erichsen hardness tester) - Organic materials
Volvo STD 1024,3115 - Determination of hardness Test Method Hardness - Rubber
Volvo STD 1024,3516/1eA (Charpy impact strength, notched) - Determination of Charpy impact properties, notched Determination of charpy impact strength (notched) of rigid materials - Plastics
Volvo STD 1024,3516/1eU (Charpy impact strength) - Determination of Charpy impact properties Determination of charpy impact strength (unnotched) of rigid materials - Plastics
Volvo STD 1024,3712 (trouser-shaped specimen) - Determination of tear resistance Fabric coated with rubber or plastic - Determination of tear resistance (with trouser-shaped specimen)
Volvo STD 1024,3716 - Tearing strength (crescent test pieces) Tearing strength (crescent test pieces) - Rubber, vulcanized or thermoplastic
Volvo STD 1024,3721 - Tearing strength Tearing Strength - Textiles
Volvo STD 1024,3725 - Tearing strength Tearing strength - Leather and artificial leather
Volvo STD 1024,7122 - Abrasion resistance, Martindale Abrasion resistance, Martindale - Fabrics
Volvo STD 1024,7122 - Abrasion Resistance, Martindale Abrasion resistance, Martindale - Fabrics
Volvo STD 1024,7134 - Abrasion with brush Abrasion - Organic materials
Volvo STD 1026,5172 - Determination of colour in colour-matching booth Determination of colour in colour-matching booth
Volvo STD 1026,5272 - Gloss measurement (20°, 60°, 85°) Gloss - Paints and enamels
Volvo STD 1026,8177 - Chemical resistance Chemical resistance - Surface treatments
Volvo STD 1026,8201 (ISO 105-A02) - Grey scale for assessing change in colour Grey scale - Determination of changes in colour
Volvo STD 1026,8202 (ISO 105-A03) - Grey scale for assessing staining Grey scale for assessing staining
Volvo STD 1026,8242 - Colour fastness to artificial light at 100 °C Organic materials - Colour fastness to artificial light at 100 °C
Volvo STD 1026,8243 - Lightfastness at 60 °C Light fastness 60 °C black panel temperature
Volvo STD 1026,8432 - Colour fastness to rubbing Colour fastness to rubbing - Rubber, plastics and textiles
Volvo STD 1027,051 - Evaluation degrees of blistering Evaluation degrees blistering of paints - Paints and enamels
Volvo STD 1027,2623 - Vicat softening temperature Determination of the Vicat softening temperature of thermoplastics - Plastics
Volvo STD 1027,2711 (Fogging F) - Determination of fogging characteristics (fogging F) Fogging - Organic materials (Fogging F, reflectometric)
Volvo STD 1027,2712 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo STD 1027,2713 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 1027,2714 / VCS 1027,2759-MS/FID - Determination of organic emissions (TVOC-MS) Determination of organic emissions from non-metallic materials in vehicle interiors - Organic materials (TVOC-MS)
Volvo STD 1027,337 - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo STD 1027,337 - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo STD 1029,3821 - Adhesive strength Coated fabric, Adhesive strength
Volvo STD 1029,5472 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamel
Volvo STD 1029,5473 - Adhesion test with switchblade Adhesion - Paints and enamels
Volvo STD 104-0001 - Burning behaviour Flammability (burning behaviour) of interior and exterior materials
Volvo STD 420-0001 - Evaluation of degree of blistering Evaluation degrees blistering of paints - Paints and enamels
Volvo STD 420-0002 - Evaluation of degree of rusting Evaluation of degradation of paint coatings - Designation of degree of rusting
Volvo STD 420-0003 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging - Organic materials (Fogging F, reflectometric)
Volvo STD 420-0003 (Fogging G) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials (Fogging G, gravimetric)
Volvo STD 420-0003 (Fogging G, Predire) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials (Fogging G, gravimetric) (Predire)
Volvo STD 422-0005 - Resistance to soiling Resistance to soiling - Textiles
Volvo STD 423-0009 - Adhesion test with switchblade Adhesion - Paints and enamels, knife technique
Volvo STD 423-0011 - Chemical resistance (hot plate) Chemical resistance, hot plate - Paints and enamels
Volvo STD 423-0012 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamel
Volvo STD 423-0014 - Accelerated corrosion test Accelerated corrosion test
Volvo STD 423-0014 - Accelerated corrosion test Accelerated corrosion test - Atmospheric corrosion
Volvo STD 423-0018 - Moisture resistance Moisture resistance in tropical cabinet - Chemical materials
Volvo STD 423-0023 - Gloss measurement Gloss - Paints and Enamels
Volvo STD 423-0030 - Scratch resistance, Erichsen pen Scratch resistance, Erichsen pen - Organic materials
Volvo STD 423-0035 - Tensile strength of seams Tensile strength of seams - Organic materials
Volvo STD 423-0037 Method A - Colour fastness to rubbing Colour fastness to rubbing
Volvo STD 423-0037 Method B - Colour fastness to rubbing Colour fastness to rubbing
Volvo STD 423-0047 - Colour fastness to artificial light at 100 °C Light exposure - Accelerated colour fastness test of interior materials
Volvo STD 423-0055 - Heat storage Short-term heat resistance
Volvo STD 423-0061 - Ligth exposure Light exposure at 75 °C - Accelerated colour fastness test of interior
Volvo STD 429-0001 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo STD 429-0002 (HPLC) - Determination of formaldehyde and acetaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 429-0002 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo STD 429-0003 (MS/FID) - Determination of organic emissions (TVOC) Determination of organic emissions from non-metallic materials in vehicle interiors (TVOC-MS) - Organic materials
Volvo STD 5031,1 - after climate storage - Burning behaviour Flammability of interior materials (after climate storage)
Volvo STD 5031,1 - after heat storage - Burning behaviour Flammability of interior materials (after heat storage)
Volvo STD 5031,1 - original condition - Burning behaviour Flammability of interior materials (original condition)
Volvo STD 5711,102-NSS - Salt spray fog test (NaCl solution) Corrosion test in artificial atmospheres - salt spray tests - Inorganic coatings; § 2.2.1: NSS test, NaCl solution
Volvo STD 5712,102 - Adhesion, file test Adhesion, file test (adhesion of metallic coating to basic metal)
Volvo STD 5712,104 - Adhesion, burnishing test Adhesion, burnishing test
Volvo STD 5715,102 - Evaluation of degree of rusting Evaluation of degradation of paint coatings - Designation of degree of rusting
Volvo TC 428.02 - Resistance to stain removing agent Resistance to stain removing agent - Surface material such as upholstery, leather, coated fabrics, etc.
Volvo TC 80000003 - Soiling and cleaning Soiling and cleaning of plastic surfaces
Volvo TC 85000005 - Linting resistance Linting resistance (modified Martindale-procedure)
Volvo TC 85000006 - Resistance to pilling Resistance to pilling
Volvo TC 85000010 - Resistance to staining, soiling resistance and cleanability Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials
Volvo TC 85000010-A - Resistance to staining, soiling resistance and cleanability Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials
Volvo TC 85000010-B - Soiling and cleaning behavior Resistance to staining, soiling resistance and cleanability of woven or knitted textile materials.
Volvo TC 85000011 § 6.1. - Resistance to abrasion (Martindale) Evaluation of soil-repellent finishes on textile materials
Volvo TC 85000011 § 6.2. - Resistance to cleaning Evaluation of soil-repellent finishes on textile materials - resistance to cleaning
Volvo TC 85000011 § 6.3. - Resistance to aging after cleaning Evaluation of soil-repellent finishes on textile materials - the influence of aging on cleaned treated material
Volvo TC 85000013 - Soiling and cleaning Soiling and cleaning of textile carpets
Volvo TC 85000015 - Determination of the firmness of loops Determination of the firmness of loops in terry fabrics or other loop fabrics
Volvo TC 85000020 - Crease test Crease test on foam laminated surface materials
Volvo TC 85000025 - Resistance against Velcro Resistance against Velcro for woven and knitted textiles (modified Martindale)
Volvo TC 85000035 - Fraying of seam Fraying of seam
Volvo TC 85000120 - Resistance to soiling and cleanability Resistance to soiling and cleanability of leather and tricot plastic
Volvo TC 85000140 - Alt2 / DIN EN ISO 4892-2 (Metod A - SST 65 °C) - UV/moisture weathering Quick test; UV/moisture for leather
Volvo TC 85000145 - Soiling and Cleaning Dye transfer by jeans fabric
Volvo TC 85000150 - Resistance to staining, soiling resistance and cleanability Substance soiling and cleanability for interior hard surfaces, coated fabrics and leather
Volvo TC 85042802 - Resistance to stain removing agents Resistance to stain removing agents
Volvo TC 88100002 - Abrasion resistance against leather Abrasion resistance of soft and hard plastic surfaces
Volvo TC 88200001 - Sun tan lotion test Sun tan lotion test
Volvo TR 22380624 § 5.9.2 - Abrasion resistance (symbols) Steering Wheel Switches § 5.9.2 Symbols
Volvo TR 31830991 § 6.1.16 Sun Lotion test - Resistance to Sun Lotion Resistance to Sun Lotion
Volvo TR 31833217 § 8.1.16 - Resistance to Sun Lotion Sun lotion test
Volvo VCS 1022,23119 - Determination of thickness Test Method - Determination of thickness
Volvo VCS 1024,21119 - Tensile properties Tensile strenght - Plastics
Volvo VCS 1024,21129 - Tensile properties Tensile strength and break elongation - Plastics
Volvo VCS 1024,28439-A - Peeling strength (method A) Peeling strength - Laminated materials (method A: with testing machine)
Volvo VCS 1024,28439-B - Peeling strength (method B) Peeling strength - Laminated materials (method B: with weights)
Volvo VCS 1024,28519 - Interlaminar strength Interlaminar strength - Soft laminates
Volvo VCS 1024,31139 - Scratch resistance with Erichsen pen Scratch resistance, Erichsen pen (Typ 318) - Organic materials
Volvo VCS 1024,31159 - Determination of hardness Test Method Hardness - Rubber
Volvo VCS 1024,35169/1eA (Charpy impact strength, notched / DIN EN ISO 179-1) - Determination of Charpy impact properties, notched Determination of charpy impact strength (notched) of rigid materials - Plastics
Volvo VCS 1024,35169/1eU (Charpy impact strength / DIN EN ISO 179-1) - Determination of Charpy impact properties Determination of charpy impact strength (unnotched) of rigid materials - Plastics
Volvo VCS 1024,37169 - Tearing strength, crescent test pieces Rubber, vulcanized or thermoplatic - Tearing strength, crescent test pieces
Volvo VCS 1024,37219 - Tearing strength Tearing Strength - Textiles
Volvo VCS 1024,71349 - Abrasion with brush Abrasion - Organic materials
Volvo VCS 1026,51729 - Evaluation of colour Assessment of colour in light booth
Volvo VCS 1026,52729 - Gloss measurement (20°, 60°, 85°) Gloss - Paints and enamels
Volvo VCS 1026,5289 - Colour measurement Colour measurement of interior materials
Volvo VCS 1026,81779 - Chemical resistance Chemical resistance - Paints and enamels
Volvo VCS 1026,81779 - Chemical resistance Test method - Chemical resistance - Paints and enamels
Volvo VCS 1026,82019 (ISO 105-A02) - Grey scale for assessing change in colour Grey scale - Determination of changes in colour
Volvo VCS 1026,82029 (ISO 105-A03) - Grey scale for assessing staining Grey scale for assessing staining
Volvo VCS 1026,82429 - Colour fastness to artificial light at 100 °C Organic materials - Colour fastness to artificial light at 100 °C
Volvo VCS 1026,84329 - Colour fastness to rubbing Colour fastness to rubbing - Rubber, plastics and textiles
Volvo VCS 1026,84349 - Colour fastness to rubbing (Veslic abrasion) Colour fastness to rubbing - Paints and enamels
Volvo VCS 1027,0519 - Evaluation of degree of blistering Evaluation degrees for blistering of paints
Volvo VCS 1027,1449 - Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load) Accelerated corrosion test, version II - ACT II; cyclic atmospheric corrosion test with salt load
Volvo VCS 1027,1449 - Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load) Accelerated corrosion test, version II - ACT II (cyclic atmospheric corrosion test with salt load)
Volvo VCS 1027,22319 - Heat ageing Rubber material - Heat ageig
Volvo VCS 1027,2719 (Fogging F) - Determination of the fogging characteristics (Fogging F) Fogging - Organic materials; Fogging F (reflectometric)
Volvo VCS 1027,2719 (Fogging G) - Determination of the fogging characteristics (Fogging G) Fogging - Organic materials; Fogging G (gravimetrical)
Volvo VCS 1027,2729 - Odour test Odour of trim materials in vehicles - Organic materials
Volvo VCS 1027,2729, based on - Odour test Odour of trim materials in vehicles - Organic materials
Volvo VCS 1027,2739 - Determination of formaldehyde emission Determination of formaldehyde emission from components in vehicle interiors - Organic materials
Volvo VCS 1027,2749 / VCS 1027,2759-MS/FID - Determination of organic emissions (TVOC-MS) Determination of organic emissions from non-metallic materials in vehicle interiors, Organic materials (TVOC-MS)
Volvo VCS 1027,2769 - Organic emission (Test chamber procedure - Standard-emission testing) Determination of volatile organic substances from interior components / systems using a 1 m³ emission chamber - Organic materials
Volvo VCS 1027,3379 / DIN EN ISO 4892-2 (Procedure A - BST 65 °C) - Light exposure Light exposure - Accelerated ageing of exterior material
Volvo VCS 1027,339 - Lichtechtheit Accelerated light exposure of exterior coatings
Volvo VCS 1027,359 - Light fastness (black standard temperature 75 °C) Colour fastness to artificial light at 75 °C - Accelerated ageing of interior materials
Volvo VCS 1029,54729 - Cross-cut test Adhesion, cross-cut test paints and enamels
Volvo VCS 1029,54729 - Cross-cut test with adhesive tape pull-off Adhesion, cross-cut test - Paints and enamels
Volvo VCS 1029,54739 - Adhesion test with folding knife Adhesion - Paints and enamels
Volvo VCS 5031,19 - after climate storage - Burning behaviour - after climate storage Flammability of interior materials (after climate storage)
Volvo VCS 5031,19 - after heat storage - Burning behaviour - after heat storage Flammability of interior materials (after heat storage)
Volvo VCS 5031,19 - Burning behaviour - original condition Flammability of interior materials (original condition)
Volvo VCS 5712,1029 - Adhesion, file test Adhesion, file test (adhesion of metallic coating to basic metal)
Volvo VCS 5712,1039 - Climate cycle test Thermal cycling test for electro-plated plastics
Volvo VCS 5715,1029 - Evaluation of degree of rusting Evaluation of degradation of paint coatings- Designation of degree of rusting
VW 50554 - Standard Atmospheres for conditioning Standard Atmospheres and Room Temperatures - Requirements on Standard Atmospheres
VW 13705 - Surface profiles (average roughness value Ra, roughness depth Rz, depth of waviness Wd) Specification of Surface Texture - Geometrical Product Specification - Engineering Drawings
VW 2.8.1 § 3.13 - Greasing Elastomers - Material requirements and inspections; § 3.13: Greasing
VW 2.8.1 § 3.9 - Ozone Resistance Elastomer - Material requirements and inspections; § 3.9: Ozon resistance
VW 50105 § 10.7 - Permanent set Upholstery cover materials - Requirements, quality specifications, tests; § 10.7: Permanent set (thickness of foam ? 8,0 mm)
VW 50123-4.5.2/6.1 (TGA) - Thermogravimetrical analysis (TGA) Thermoplastic elastomers - Quality requirements; § 4.5.2: Thermogravimetry (TGA)
VW 50129 § 3.13 - Abrasion from a window glass pane edge Bonded coating-covered body seals - Requirements and tests; § 3.13: abrasion from a window glass pane edge
VW 50129 § 3.15 - Abrasion by means of abrasion cloth Bonded coating-covered body seals - Requirements and tests; § 3.15: Abrasion by means of abrasion cloth
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50133 § 4.1 - Workmanship (Resistance to test medium) PA66 for finished parts outside the vehicle interior - Material requirements; § 4.1: Workmanship (media resistance)
VW 50181 (Fogging G) - Determination of the fogging characteristics (Fogging G) Lights with transparent cover - Fogging behaviour (Fogging G)
VW 50190 (Colour) - Colourimetric evaluation Components of the vehicle interior trim - Colorimetric evaluation (here color) Application only for comparative measurements before and after ageing tests, color measurement according to DIN EN ISO 11664-4.
VW 50190 (Colour) - Colourimetric evaluation Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces (here color) Application only for comparative measurements before and after ageing tests, color measurement according to DIN EN ISO 11664-4.
VW 50190 (Gloss) - Colourimetric evaluation Interior trim components - Metrological evaluation of color and gloss level - Visual evaluation of chrome surfaces (here gloss) Application only for comparative measurements before and after ageing tests, gloss meaurement according to DIN EN ISO 2813.
VW 50195 § 3.2.1 Solid paint / DIN 5033-7 - Color meassurement (CIELAB) Colorimetric Evaluation of Exterior Automotive Paint Finishes § 3.2.1 Solid paint
VW 50196 § 4.2.1 Solid-color paints / DIN 5033-7 - Color meassurement (CIELAB) Decorative Exterior Parts in Non-Body Color - Determining Color and Gloss § 4.2.1 Measuring solid-color paints
VW 50196 § 4.2.2 Effect paints / DIN 5033-7 - Color meassurement (CIELAB) Decorative Exterior Parts in Non-Body Color - Determining Color and Gloss § 4.2.2 Measuring effect paints
VW 8000 § 12 - Chemical resistance Electric and Electronic Components in Motor Vehicles up to 3.5 t - General Requirements, Test Conditions and Tests, § 12: Chemical requirements and tests
VW 80200-2 (X-axis) - Vibration test with superimposed temperature cycle B (8 h)
VW 80200-2 (Y-axis) - Vibration test with superimposed temperature cycle B (8 h)
VW 80200-2 (Z-axis) - Vibration test with superimposed temperature cycle A (24 h)
VW 80972 § 5.6 - Resistance to chemical agents Car radio - General requirements; § 5.6: Chemical requirements (resistance to chemical agents)
VW 96380 variant 1 - Corrosion test Corrosion test - modified environmental cycle test
VW Colour fastness to abrasion (rotary abrasion test) VW - Colour fastness to abrasion (rotary abrasion test - Schopper): Rating of staining on cotton fabric
VW EP 81020.16 - Screw tight fit ZSB Car body - Screw tight fit
VW EP 84 151.11 § 2.2 - Actuation forces Center armrest in Center console ASSY, overview, technical requirements; § 2.2 Actuation forces
VW EP 84 151.11 § 2.3 - Misuse Test Center armrest in Center console ASSY, overview, technical requirements; § 2.3 Misuse Test
VW EP 84 350.10 - Operating and adjustment forces, adjustment torques Mechanical headrest - Operating and adjustment forces, adjustment torques
VW EP 84 350.11 - Measurement of play Headrest - Measurement of play
VW PV 1004 - Inherent stress condition Valve Armor - Examination of the residual stress state
VW PV 1015 § 3 - Specific volume resistivity Contact corrosion from elastomers and plastics in contact with light alloys - examination of the volume resistivity
VW PV 1021 - Determination of iron content Zinc-iron Alloy Coatings - Determination of iron content by ICP
VW PV 1058 - Determination of chromium crack grid Chrome surfaces - Determination of chromium crack grid
VW PV 1063 - Determination of Micropore Density Chrome-Plated Surfaces - Determination of Micropore Density
VW PV 1065 - Potential differences and layer thicknesses of nickel coatings Chrome-Plated Surfaces - Determination of potential differences and layer thicknesses of nickel coatings
VW PV 1073 - A - Resistance to chrome corrosion Chrome-Plated Plastic Parts - Corrosion Resistance of Chrome Surfaces - Test method A
VW PV 1073 - B - Resistance to locally intensified nickel corrosion Chrome-Plated Plastic Parts - Corrosion Resistance of Chrome Surfaces - Test method B
VW PV 1200 - Resistance to environmental cycle test Vehicle parts - Testing of resistance to environmental cycle test (+80/-40) °C
VW PV 1209 - Environmental corrosion cycle test Condensers, radiators, and charge air coolers made of aluminum alloys - Corrosion test (environmental corrosion cycle test)
VW PV 1210 - Corrosion test Body and add-on parts - Corrosion test
VW PV 1210 - Corrosion test Body and add-on parts - Corrosion test
VW PV 1210, modified - Corrosion climate cycle test Body and Add-On Parts/ Hang-on Parts
VW PV 1217 - Resistance to stone impact Paints and varnishes on plastics - Resistance to stone impact
VW PV 1300 - Thermal stability test PVC and PVC mixed polymer - Thermal stability test
VW PV 1303 - Light exposure test (100°C) Non-metallic materials - Exposure test of passenger compartment components
VW PV 1306 - Exposure test for determining the tackiness Non-metallic materials - Exposure test for determining the tackiness of polypropylene parts
VW PV 1323 - Sun test Non-metallic materials - UV radiation on thermoplastic material, outside, in sun test
VW PV 1488 - Stress cracking in test bars made of acrylic glass when exposed to a windshield cleaner Windscreen cleaning fluids - Testing of the stress crack-inducing potential
VW PV 1502 - Weathering (resistance to cracking) Clear coat for dual-layer metallic paint coatings - Testing for resistance to cracking
VW PV 1502 - Weathering (resistance to cracking) Clear coat for dual-layer metallic paint coatings - Testing for resistance to cracking
VW PV 1503 - Steam jet test Paint coating of metallic an non-metallic materials - Pressure washer test
VW PV 1503 - Steam jet test Paintwork of metallic and non-metallic materials - pressure washer test
VW PV 2005-A - Climate cycle resistance; Variant A: single parts Vehicle parts - Testing of resistance to environmental cycle test; Variant A: single parts
VW PV 2027 - Tensile load Test specification - Angular bonding - Strength test, tensile load
VW PV 2033 - Method A - Melting behaviour Hot-Melt adhesive films - Testing of melting behavior, thermal stability
VW PV 2033 - Method B - Melting behavior Hot-melt adhesive films - Testing of melting behavior, thermal stability - Method B
VW PV 2034 - Floating roller peel test (adhesion test) Non-metallic planar materials - Floating roller peel test
VW PV 2037 - Resistance to preservaties and cleaning agents Plastic parts, metal-nonmetal bonds - Resistance to preservaties and cleaning agents
VW PV 3.10.7 - Testing for substances that impair paint wetting ability Paints and Varnishes - Testing for substances that impair paint wetting ability
VW PV 3.10.7 - Testing for substances which disrupt the paint wetting Paints and varnishes - Testing for substances which disrupt the paint wetting
VW PV 3.11.1 - Resistance to premium gasoline Paints and varnishes - Testing of resistance to premium gasoline
VW PV 3.11.2 - Resistance against FAM test fuel Paints and varnishes - Resistance test against FAM test fuel
VW PV 3.11.3 - Resistance to diesel fuel Paints and Varnishes - Testing of resistance to diesel fuel
VW PV 3.12.1 - Oil resistance Paints and Varnishes - Testing of oil resistance
VW PV 3.14.4 - Stone Impact Resistance (mobile Prüfung) Paints and varnishes - Mobile stone impact resistance test of body top coats
VW PV 3.14.7 - Stone impact test Paints and Varnishes - Test of Stone-chip Resistance according to DIN EN ISO 20567-1
VW PV 3.17.1 - Stone impact resistance Paints and varnishes - Determination of Corrosion Resistance after Mechanical Damage
VW PV 3.2.4 - Gloss measurement Paints and varnishes - Determining the reflectometer value according to DIN 67530
VW PV 3.3.3 - Scratch resistance Paint and varnishes - Scratch resistance testing of clear coats
VW PV 3015 - Determination of the fogging characteristics (Fogging G) Non-metallic materials for interieur trim - Determining condensable constituents (Fogging G)
VW PV 3015 - Fogging (gravimetric) Fogging behavior of automotive interior materials, gravimetric determination of condensable constituents
VW PV 3305 § 3.1 - Ozone resistance Rubber vulcanizates - Testing of ozone resistance and permanent deformation
VW PV 3305 § 4.1 - Ozone resistance Vulcanized rubber products - Test of ozone resistance and permanent deformation, § 4.1 Ozone resistance
VW PV 3305 § 4.2 - Permanent deformation (tension set) Vulcanized rubber products - Test of ozone resistance and permanent deformation, § 4.2 Permanent deformation
VW PV 3307 - Determination of plastic and elastic deformation Elastomer Components - Plastic and elastic deformability
VW PV 3307 - Determination of plastic and elastic deformation Elastomer components - Plastic and elastic deformability
VW PV 3314 § 3.5 - Tear strength between edge protection and hose or lip Edge protection with hose seal - Materials testing; § 3.5: Tear strength between edge protection and hose or lip
VW PV 3330 - Determination of compression set (Permanent deformation) Elastomer O-rings compression set (Permanent deformation)
VW PV 3340 § 4 - Tensile strength of the adhesive seam EPDM-profile, roof trims - Tests; § 4: Tensile strength of the adhesive seam of the additional seal for type golf A2
VW PV 3341-MS/FID - Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD) Non-metallic materials in automotiv interior trim - Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD)
VW PV 3353 - Soiling and cleanability behaviour Vehicle interior trim surfaces - Soiling and cleaning behavior
VW PV 3354 - Adhesion of the finish Testing of leather - Adhesion of the finish
VW PV 3355 - Migration staining PVC-parts contact heat storage
VW PV 3356 - Soiling and cleanability behaviour Textiles and films - Soiling and cleaning behavior (Martindale-Verfahren)
VW PV 3357 - Surface and edge flame exposure Insulating material - Behavior during flame exposure with a burner - Surface and edge flame exposure
VW PV 3357 - Surface and edge flame exposure Insulating material - Behavior during flame exposure with a burner - Surface and edge flame exposure
VW PV 3360 - Determination of the fluffing behaviour (Random Tumble Pilling Tester) Upholstery materials - Determination of the fluffing behaviour
VW PV 3361 - Hook fastener test Trim Cover Fabric - Wear and External Pilling Characteristics - Hook Fastener Test
VW PV 3361 - Velcro closure test Upholstery materials - Wear and external pilling characteristics - Velcro closure test
VW PV 3362 - Resistance to Separation Testing of RWDR/IWDR - Examination of the Resistance to Separation of PTFE-Sealing element to Carrier
VW PV 3366 - Wear characteristics of flocked material (VW chisel test) Elastomer seals - Wear characteristics of flocked material
VW PV 3410 § 4.4 - Static set (indentation depth) PUR Flexible Foam - Testing Methods - § 4.4 Static set
VW PV 3425 - Determination of the residual wall thickness Desired Airbag Break Point in Slush Films - Determining The Residual Wall Thickness
VW PV 3427 - Elasticity test PUR-soft foam - Elasticity
VW PV 3549 - Environmental Vibration Endurance Test Environmental Vibration Endurance Test
VW PV 3900 (Variant 1) - Odour test Components in passenger compartment - Odor test; Variant 1: 23 °C / 24 h
VW PV 3900 (Variant 2) - Odor test Components in passenger compartment - Odor test; Variant 2: 40 °C / 24 h
VW PV 3900 (Variant 2) - Odour test Components in passenger compartment - Odor test; Variant 2: 40 °C / 24 h
VW PV 3900 (Variant 3) - Odor test Components in passenger compartment - Odor test; Variant 3: 80 °C / 2 h
VW PV 3900 (Variant 3) - Odour test Components in passenger compartment - Odor test; Variant 3: 80 °C / 2 h
VW PV 3900 (Variant 4 - Leather, with water) - Odor test Components in passenger compartment - Odor test; Variant 4: Leather 50 °C / 2 h with water
VW PV 3900 (Variant 5 - Leather, without water) - Odor test Components in passenger compartment - Odor test; Variant 5: Leather 50 °C / 2 h without water
VW PV 3903 - Flexural strength Non-metallic flat items - Measurement of flexural strength
VW PV 3904 - Flame Retardance (Ageing storage) Interior trim materials - Flame retardance
VW PV 3905 - Ball drop test Organic materials - Ball drop test
VW PV 3906 - Abrasion behavior Non-Metallic Planar Materials - Testing the Abrasion Behavior
VW PV 3906 - Abrasion behaviour Non-metallic planar fabrics - Testing of abrasion behavior
VW PV 3907 - Brush abrasion test Textiles - Brush abrasion test (Rotary abrasion machine)
VW PV 3908 - Rotary abrasion test (Schopper) Textiles, carpets - Wear resistance (Abrasive paper)
VW PV 3909 - Static and permanent elongation Non metallic planar materials - Measurement of static and permanent elongation
VW PV 3919 - Compression stress determination Faservlies-Dämpfung - Bestimmung der Stauchhärte
VW PV 3920 (Fogging F) - Determination of the fogging characteristics (Fogging F) Nonmetallic materials for the interior - Determination of the fogging value (Fogging F)
VW PV 3922 - Oil and water repelling behavior Planar fabrics and molded parts - Oil and water repelling behavior
VW PV 3925 (HPLC) - Formaldehyde and other carbonyls with HPLC
VW PV 3925 - Measuring emissions of formaldehyde Polymer materials - Measuring emissions of formaldehyde
VW PV 3927 - Thermogravimetrical analysis (TGA) Thermogravimetric analysis for plastics and elastomers - Determination: Plasticizers, Carbon Black (TGA)
VW PV 3927 - Thermogravimetrical analysis (TGA) Thermogravimetric analysis for plastics and elastomers - Determination: Plasticizers, Carbon Black (TGA)
VW PV 3928 - External pilling (Martindale procedure) Planar fabrics of the vehicle interior trim - Determination of external pilling on automobile upholstery fabrics
VW PV 3929 - Resistance to weathering (dry-hot climate, e.g. Kalahari, Arizona, South America) Non-metallic materials - Weathering in dry, hot climate
VW PV 3929 - Resistance to weathering (dry-hot climate, e.g. Kalahari, Arizona, South America) Non- metallic materials - Weathering in dry, hot climate (Exterior)
VW PV 3930 - Resistance to weathering (humid, hot climate, e.g. Florida) Non-metallic materials - Weathering in humid, hot climate (Exterior)
VW PV 3930 - Resistance to weathering (moist, hot climate, e.g. Florida) Non-Metallic materials - Weathering in moist, hot climate
VW PV 3931 - Hardness test (Shore L) Hardness testing - PUR integral foam - Steering wheel rim
VW PV 3932 - Wear resistance of flocking (VW chisel test) Flocked plastic parts - Abrasion resistance
VW PV 3935 (Py-GC-MS) Plastics and elastomers - Pyrolytic gas chromatography / Mass spectrometry
VW PV 3935 - Pyrolysis-GC/MS Plastics and Elastomers - Py-GC/MS, TD/Py-GC/MS, Heart-Cut, EGA
VW PV 3937 - Amine emission (inidicator method) Amine emissions from PUR flexible foam - Indicator method
VW PV 3939 § 3.1 - Determination of extractable components Tubes in windscreen washer systems - Extractable components; § 3.1: Determination of extractable components using an extraction apparatus
VW PV 3939 § 3.1.1 - Determination of extractable components Tubes in windscreen washer systems - Extractable components; § 3.1.1: Determination of extractable components using an extraction apparatus per Twisselmann
VW PV 3939 § 3.2 - Visual evaluation of extractable components Tubes in windscreen washer systems - Extractable components; § 3.2: Visual evaluation of extractable components
VW PV 3942 - Determination of organic emissions Emission behavior of parts, components and semi-finished products for the vehicle interior - examination by the component chamber method
VW PV 3944 - Amine discoloration PVC-sun visor - Amine discoloration
VW PV 3945 - Dynamic-Mechanical Analysis Elastomers and Thermoplastic Elastomers - Determining the Low-Temperature Flexibility with DMA
VW PV 3946 - Seam strength Upholstery material - Determination of the strength, resistance to tearing and shifting of seams
VW PV 3949 - Snag test (with abrasion chisel) Upholstery cover materials - Snag test
VW PV 3950 -A - Flexural strength (3-point bending) Molded Headliner ASSY - Bending Resistance Testing
VW PV 3951 - Magnetic Adhesion Bitumen Films - Testing of Magnetic Adhesion
VW PV 3952 - Scratch resistance Plastic interior components - Testing of scratch resistance (followed by colour measurement)
VW PV 3955 - Determination of the seam slippage resistance Upholstery cover material - Determining the seam slippage resistance of upholstery cover material: woven fabrics
VW PV 3958 - Determination of water tightness Textile floor mats - Water tightness
VW PV 3959 - Storage in a desiccator Hydrolysis test on the roof liner with laminated interior décor
VW PV 3959 - Storage in a desiccator Hydrolysis test on components with foam-laminated decorative material in vehicle interior
VW PV 3960 - Indentation depth measurement (hardness) Dashboard - Indentation depth measurement (hardness) using a universal testing machine
VW PV 3961 - Hook- and Loop test Trim Cover Material - Hook Fastener Test
VW PV 3961 - Hook- and Loop test Trim cover material - Hook fastener test
VW PV 3961 - Hook-and-Loop test Upholstery Fabric - Velcro test
VW PV 3964 - Cream resistance Surfaces in the passenger compartment - Testing of cream resistance
VW PV 3965 - Visual Color Matching Decorative Surfaces on and in the Vehicle - Visual Color Matching according to DIN EN ISO 3668
VW PV 3966 - White cracking properties (Ball drop test) PP Components - White cracking properties (Ball drop test)
VW PV 3966 - White cracking properties (Ball drop test) PP Components - White cracking properties (Ball drop test)
VW PV 3968 - Soiling behaviour (Martindale method) Leather - Soiling behavior (Martindale method)
VW PV 3969 - Adhesion strenght Composite seat heating / adhesive tape / foam - Test of the adhesion strenght
VW PV 3970 - Determination of the potential for mold growth Determination of the potential for mold growth
VW PV 3971 - Adhesion at Low Temperatures Anti-Drumming Layers - Determination of the Adhesion at Low Temperatures
VW PV 3973 - Tensile-Test Elastomer O-Rings - Determining tensile strenght, elongation at tear and stress values in the tensile test
VW PV 3974 - Determination of the scratch inclination VW - Plastic Interieur parts. Determination of the scratch inclination on grained surfaces test of motor vehicle interior materials
VW PV 3975 - Scrub Resistance of High-Gloss Surfaces Abrasion resistance of high gloss surfaces in the vehicle interior
VW PV 3976 - Corrosion effect on copper Determining / evaluating the corrosion effect of elastomers on electrolyte copper
VW PV 3983 - Stress crack resistance Total vehicle - media resistance of plastics and thermoplastic elastomers in conjunction with mechanical stresses
VW PV 3983 - Stress crack resistance Plastics and thermoplastic elastomers - Testing of media resistance in connection with mechanical stress
VW PV 3987 - Scrubbing resistance (microscratch resistance) of high gloss surfaces Scrubbing resistance (microscratch resistance) of high gloss surfaces in the vehicle interior
VW PV 3990 - Bond strength test Back of molded headliner - Bond strength test for nonwoven fabric tape
VW PV 5015 BR - Resistance to Hydrolisis Test Prescription - Resistance to hydrolisis in PU foams
VW TL 1010 - Burning behaviour Materials for vehicle interiors - Burning behavior, material requirements
VW TL 1011 - after aging - Flammability Flammability of non-metallic materials - burning behavior, material requirements
VW TL 1011 - delivery conditions - Flammability Flammability of non-metallic Materials - burning behavior, material requirements
VW TL 203 § 3.4c - File test Electroplated Ni-Cr coatings - Requirements for surface protection; § 3.4c: File test
VW TL 203 § 3.4d - Resistance to temperature cycling Electroplated Ni-Cr coatings - Requirements for surface protection; § 3.4d: Resistance to temperature cycling
VW TL 216 § 3.5 / based on DIN ISO 4532 - Firing pin impact test Corrosion Protection on half Shafts § 3.5 Behavior at low temperature
VW TL 226 § 3.12.3.2 / PV 3906 - Abrasion behaviour, 100 crockmeter strokes against dry cloth Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.2: Abrasion behavior, 100 crockmeter strokes against dry cloth
VW TL 226 § 3.12.3.3 / PV 3906 - Abrasion behaviour, 100 crockmeter strokes against moist cloth (water) Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.3: Abrasion behavior, 100 crockmeter strokes against moist cloth (water)
VW TL 226 § 3.12.3.4 / PV 3906 - Abrasion behaviour, 2000 crockmeter strokes against dry cloth Paint coating on materials used in the vehicle interior trim - Requirements; § 3.12.3.4: Abrasion behavior, 2000 crockmeter strokes against dry cloth
VW TL 226 § 3.13.2 - Drop test Paint coating on materials used in the vehicle interior trim - Requirements; § 3.13.2: Resistance to cleaning agents and synthetic sweat, drop test
VW TL 226 § 3.13.3 / PV 3906 - Abrasion behaviour Paint coating on materials used in the vehicle interior trim - Requirements; § 3.13.3: Resistance to cleaning agents and synthetic sweat, abrasion behaviour
VW TL 226 § 3.7.2 - Crosscut test (St. Andrew's cross) with adhesive tape pull-off Paint coating on materials used in the vehicle interior trim - Requirements; § 3.7.2: Adhesion and brittleness in initial condition, crosscut test
VW TL 256 § 10 / based on DIN ISO 4532 - Firing pin impact test Powder Coating on Metal Surfaces - Surface Protection Requirements, Table 2 § 10 Impact test at low temperature
VW TL 496 § 3.14 - Resistance to cleaning agents (Staining) Door and rear side trim panel ASSY - Material requirements; § 3.14: Resistance to cleaning agents (Staining)
VW TL 496 § 3.15 (a) - Cleaning behavior with solvents Door and rear side trim panel ASSY - Material requirements; § 3.15a: Cleaning behavior of the surface materials, cleaning behavior with solvents
VW TL 496 § 3.15 (b) - Drop test Door and rear side trim panel ASSY - Material requirements; § 3.15b: Cleaning behavior of the surface materials, drop test
VW TL 496 § 4.2.5 - Behavior against detergents Door and side trim panel ASSY - Material requirements; § 4.2.5: Behavior of decorative material to detergents (bleeding)
VW TL 496 § 5.5 - Droplet test Door and side trim panel ASSY - Material requirements; § 5.5: Droplet test
VW TL 52035 § 5.14 - Resistance to test media PP / EPDM / PE polymer blend - Finished parts; § 5.14: Resistance against detergents and sealants (Resistance to test media)
VW TL 52045-4.4 - Drop test PUR integral foam for steering-wheel coating - Material requirements; Tabel 2 point 4: Drop test
VW TL 52057 § 4.5.3 - Separating force EPDM door seal with protective edging profile; § 4.5.3: Separating force
VW TL 52065 § 5.10 - Water tightness during heat and humidity aging, U-test Elastomer Sealing Material Made of Cellular Rubber § 5.10 Sealing behavior during heat and humidity aging
VW TL 52065 § 5.8 - Paint indifference, contact/ surrounding discoloration Elastomer sealing material made of cellular rubber - Material requirements § 5.8 Paint indifference
VW TL 52065 § 5.9 - Water tightness in as-delivered condition, U-test Elastomer Sealing Material Made of Cellular Rubber § 5.9 Sealing behavior
VW TL 52283 § 4.7 - Resistance to agents Polypropylene, elastomer-modified, talc - or Mineral-Modified - Material requirements; § 4.7: Resistance to agents
VW TL 52296 § 2.1.4 - Resistance to agents (drop test) Dashboard and knee bar ASSY - Material requirements; § 2.1.4: Resistance to agents (drop test)
VW TL 52345 § 4.9.1 - Abrasion from a window glass pane edge EPDM Body Seals - Quality requirements; § 4.9.1: Wear resistance of paint coating, abrasion over window glass edge
VW TL 52435 § 6.7 - Resistance to leaching Fuel pipe, multilayer pipe - Resistance to leaching
VW TL 52472 § 3.5.14 - Color fastness to abrasion (rotary abrasion test) Polyolefins for floor coverings - Material requirements; § 3.5.14: Color fastness to abrasion (rotary abrasion test - Schopper): Staining of the rubbing cloth
VW TL 52499 § 5.5.1 - Color fastness to abrasion (rotary abrasion test) Trim panels made of molded, thermoplastically bonded mixed fiber material - Material requirements; § 5.5.1: Color fastness to abrasion (rotary abrasion test - Schopper)
VW TL 52703 § 5.1.3 - Paint indifference, contact/ surrounding discoloration Static body seals and molded corners made of TPE and PP § 5.1.3 Paint indifference
Washout effect Discolouration of organic materials due to elastomers (paint indifference) - Washout effect
Water absorption Water absorption
Water repellency (shower method) General method - Water repellency for textile materials (e.g. GM/Opel GMW 4726, Mazda MES MN 400X § 7.20)
Water resistance (water permeability) General method - water resistance (water permeability) / eg. Honda 8360Z-TR0-A000 § 6-4
Weight Weight
Weight change after storage in test medium Weight change after storage in test medium
Weight determination Weight determination
Weld corrosion - Evaluation degree of rusting Daimler - coating / painting for components: assessment of degree of rusting / Weld corrosion (general method)
Wicking Wicking
Woolmark TM 31 - Dimensional change Woolmark test method - Washing of wool textile products; Dimensional change
X-ray fluorescence spectroscopy (XRF) - Determination of elements us